Nondestructive Testing and Evaluation

Article	Citations
A crowd-sourcing recommendation algorithm OPCA-CF using outer-product co-attention mechanism	62
Reflection behaviour of SH0 from small defects in thin sheets, with application to EMAT inspection of titanium	31
Rapid diagnosis of corrosion beneath epoxy protective coating using non-contact THz-TDS technique	29
Continuous spiral line laser scanning infrared non-destructive testing for cylinder liners scratch defects: device design, numerical simulation, and results reconstruction	27
Multi-frequency eddy current non-destructive evaluation of battery tab welding quality	27
Human-centric lighting asset management for LED bulbs: a context-driven approach on prognostics and maintenance strategy development in public libraries	26
Quantitative non-destructive evaluation analysis and characterisation of microcrack detection based on carbon steel weld under alternating current field measurement	24
Analysis of precursor response characteristics and time-frequency vibration parameters of rock failure: a laboratory experimental method	23
A novel eddy current testing for permeability measurement reducing lift-off and tilt angle effect	22
Simultaneous measurement of thickness and ultrasonic wave velocity using a combination of laser-generated multiple wave modes in the thermoelastic regime	22
Image denoising for laser ultrasonic inspection of wire arc additive-manufactured components with a rough surface	22
Condition assessment of prestressed hollow-core slab bridges based on 1D CNN using acoustic emission technique	21
Analyzing the interaction mechanism between tire side-slip angle and sidewall flexible deformation using enhanced digital image correlation	21
Data enhanced YOLOv8s algorithm for X-ray weld defect detection	20
Non-contact laser vibrometry for rock failure precursor analysis: a comparative study with AE methods	20
Damage imaging of a U-shaped boom using improved periodic permanent magnet electromagnetic acoustic transducers	19
Nondestructive and accurate prediction of IGBT junction temperature in wind power converters: based on IDMOA-ELM prediction method	18
Ultrasonic signal classification for composite materials via deep convolutional neural networks	18
Lamb mode identification based on lightweight CNN	18
Estimation of Lamb wave propagation by means of Fourier spectral frequency response function	17
Classification of weld quality in ultrasonic composite welding using vibration information	17
Digital twin-based non-destructive testing for structural health monitoring of bridges	17
A light-weight factorized convolutions based dual-input fuzzy-CNN for efficient motor bearing fault diagnosis	16
Transformer-ultrasonic synchronised rotating sensor for detection of drum shaft defects	15
Intelligent diagnosis of gas pipeline condition through multivariate analysis of acoustic emission signal-based imaging	14

Debonding imaging of the aluminium/rigid polyurethane foam composite plates using A 0 mode Lamb waves	14
Experimental investigation of the metallurgical and mechanical properties of laser weld Inconel 825 joints for petrochemical plants	14
Defect intelligent detection for pipeline girth welds based on improved YOLOv5 model	13
Non-destructive evaluation of failure mechanisms in multilayered coal-rock specimens using acoustic emission characterisation	13
Correction	13
An end-to-end neural network for uncollimated Compton backscatter imaging with energy spectrum data: a Monte Carlo study	13
Assessment of the degree of damage in structural materials using the parameters of structural acoustic noise	12
Crack detection and damage evaluation of asymmetrical steel-reinforced concrete frame nodes using acoustic emission technology	12
Material model of thermally modified resonance spruce ( Picea abies Karst.) for linear damped modal analysis	12
Optical-acoustic responses in uniaxial compression failure progress of fibre-reinforced cemented bodies	12
Inspection of defects in friction stir welded Al-7075 T6 alloy	12
Spread spectrum reflectometry for the simultaneous diagnosis of shielded cable bundles	12
Adaptive Ramanujan package decomposition method: a novel precise health indicator of rolling bearings	11
Improved detection of surface defects at sample edges using high-frequency eddy current amplitude and phase measurements	11
Imaging localisation of damages on switch rail foot based on laser ultrasonic testing	11
A deep-transfer-learning fault diagnosis method for gearboxes based on discriminative feature extraction and improved domain adversarial neural networks	11
Nondestructive evaluation of cooling passages and their blockage using vapor excited active thermography	11
Defect classification of composite materials using transfer learning methods	11
Analysing suspected linear indications in narrow-gap welding of nuclear power plants via radiographic inspection	11
Smart systems for real-time bearing faults diagnosis by using vibro-acoustics sensor fusion with Bayesian optimised 1-D CNNs	11
An efficient multiscale enhancement network with attention mechanism for aluminium defect detection	11
Analysis and experimentation of lamb wave transmission characteristics in the stiffened plates	11
A self-configuring transformer segmentation method for welding radiographic defect detection in steel pipes	11
Deep learning-based arecanut detection for X-ray radiography: improving performance and efficiency for automated classification and quality control	11
Evaluation of the wear mechanism of ferromagnetic materials based on magnetic barkhausen noise	10
Enhanced photoacoustic signal processing using empirical mode decomposition and machine learning	10
Research on damage behavior of thermal barrier coatings based on acoustic emission technology	10
Experimental investigation of the static and dynamic damping behaviour of antifriction bearings	10
Spatial evolution characteristics of the mechanical properties of gangue-cemented paste backfill with high-water-content materials: an experimental investigation	10
Developing effective thermal signal processing to improve thermographic non-destructive inspection of metallic components	10
A novel model to obtain equi-biaxial residual stress of metallic materials via instrumented spherical indentation	10
A CNN-based network with attention mechanism for autonomous crack identification on building facade	10
Non-contact detection of leak-derived energy loss for an in-service pipeline system using digital image correlation	10
Thickness measurement of polychlorotrifluoroethylene coating over metallic seal using terahertz time-domain spectroscopy	10
Residual life prediction of multi-layer composite coatings based on vector quantised and attention-variational AutoEncoder network	10
Sparse-View Cone-Beam CT Reconstruction by Bar-by-Bar Neural FDK Algorithm	10
Determining position of cracks on polished stone surfaces using flash active thermography	10
MSTD: a framework for rolling bearing fault diagnosis based on multi-scale and soft-threshold denoising	10
Pose estimation of multi-view X-ray radiography with variable imaging geometry for industrial assembly inspection	10
Novel three-dimensional ultrasonic-imaging-based concrete defect localisation and quantification technique considering concrete inhomogeneity	9
An improved YOLOv8-based method for concrete surface crack detection	9
Acoustic emission wave propagation in pipeline sections and analysis of the effect of coating and sensor location	9
Free vibration analysis of functionally graded sandwich spherical shells with honeycomb core resting on Kerr foundation using the MITC4 element	9
Identification method of circumferential declination based on amplitude reduction of pipeline ultrasonic internal inspection signals	9
An intelligent method for identifying magnetic flux leakage defects in small-diameter pipe elbows based on deep learning	9
DFW-YOLO: YOLOv5-based algorithm using phased array ultrasonic testing for weld defect recognition	9
Advancing non-destructive weld assessment using autoencoder-based feature extraction	9
Determination of surface density of nonporous membranes with ultrasonic immersion measurements	9
Inspection of thick composites: a comparative study between microwaves, X-ray computed tomography and ultrasonic testing	9
Enhanced fault diagnosis of rolling bearings using an improved inception-lstm network	9

Study on stage characteristics of hydraulic concrete fracture under uniaxial compression using acoustic emission	8
Cut-off frequency analysis of SH-like guided waves in the three-dimensional component with variable width	8
The vibration behaviour-based meshfree moving Kriging method of functionally graded sandwich plates placed on Kerr foundation	8
Application of NDT active thermography for the characterisation of the cold spray process of high-entropy alloys	8
Influence of tensile stress on the magnetic flux leakage signal of the coated steel belt	8
Impact load identification of high-speed train scale carbody based on multi-objective optimisation and TwIST sparse regularisation	8
Identification of crack by vibration analysis and restoration of dynamic response in beams using PZT sensor/actuator	8
Orientation characterisation of branched crack-like defects in curved components using ultrasonic array vector total focusing method	8
Quantitative characterisation of debris cloud-induced pitting damage in AL-Whipple shields of spacecraft using infrared thermography	8
Quantitative evaluation of surface crack depth on notched bars with laser-infrared detection technology	8
Vibration and infrared thermography based multiple fault diagnosis of bearing using deep learning	8
Acoustic emission characteristics and failure prediction of defective cemented gangue-fly ash backfill under seepage-stress coupling	7
The Influence of Gravitational Stiffening and De-stiffening on Nonlinear Dynamic Behavior of Vertical Beams with Cracks	7
An optimised variational mode decomposition method based on improved coati optimisation algorithm for blockage detection of natural gas pipelines	7
An improved design of high-signal-to-noise ratio spiral-coil EMAT for high-temperature defect detection	7
Mitigating RGB-D camera errors for robust ultrasonic inspections using a force-torque sensor	7
Localisation method of strawberry nursery greenhouse robots based on visual infrared beacons	7
An optimisation method for coplanar array capacitor image reconstruction based on Chambolle-Pock framework with automatic parameter selection	7
Topology reconstruction of wiring networks using an iterative process based on Time-Domain Reflectometry and Forensic-Based Investigation algorithm	7
Assessing the efficacy of non-destructive testing methods to detect pitting corrosion	7
MTGGAN: generate type-controllable magnetic tile defect data to improve defect detection performance	7
A review on flow visualisation of wind turbine blades in operation	7
Changeable environment visual detection of grinding surface roughness based on lightweight network	7
Experimental and numerical studies on the effectiveness of high-strength steels protecting against API BZ projectiles	7
Destructive and non-destructive testings of 304 austenitic stainless steel produced by investment casting method	7
Weak bond evaluation of lap bonding structures by SH guided waves using EMATs	7
Fast and quantitative noncontact laser ultrasound tapping detection of debonding in aerospace honeycomb sandwich panel based on autoencoder-softmax	7
Deformation failure and damage evolution law of weathered granite under triaxial compression	6
Detection of Decarburising Depth in Hadfield Steels Using a Multi-magnetic NDE Method	6
A quantitative monitoring method for the pretightening state of bolts based on nonlinear Lamb waves and incremental learning	6
Efficiency investigation of different ferrite shapes by inductive sensing for barkhausen noise non-destructive testing	6
Multi-feature information fusion in ultrasonic phased array for enhanced weld defect identification	6
Progress in terahertz nondestructive testing of thermal barrier coatings: a review	6
Application of infrared thermography in concrete bridge deck inspection: current practices, challenges and future needs	6
Feasibility study of nonlinear ultrasonic imaging using a contact pulse-echo method for fatigue damage evaluation	6
Non-destructive testing of composite materials with ultrasonic array based on EMD-ATRM	6
Statement of Retraction: Surface roughness grade evaluation of milling workpiece based on deep transfer learning	6
Roughness classification detection of Swin-Transformer model based on the multi-angle and convertible image environment	6
Research on steel surface defect detection system based on YOLOv5s-SE-CA model and BEMD image enhancement	6
Near- and remote-field pulsed eddy current integrated testing for enhancement in imaging of buried flaws in layered conductive structures	6
Fault diagnosis for ion mill etching machine cooling system based on omni-dimensional dynamic convolution and dynamic spatial pyramid pooling	6
A lightweight approach for accurate detection of pipeline weld defects	6
A review of NDE techniques for hydrogels	6
Research on the change in lubrication state and temperature control strategy of high-speed train axle box bearings using non-destructive testing	6
An approach for damage detection in noisy environments using DOG multi-scale space and fractal dimension	6
GBC-BCD: an improved bridge crack detection method based on bidirectional Laplacian pyramid structure with lightweight attention mechanism convolution	6
Numerical simulation and experimental verification of ultrasonic wave radiation and diffraction by crack-like flaws	6
Numerical investigation to study the influence of thickness and electrical conductivity of metal-sheets on the LOI-Point of a PEC sensor	6
Imaging method of surface defect using leaky Rayleigh wave with ultrasonic phased array	5
Structural damage detection using a weighted Bayesian fusion model	5
Evaluation of fatigue damage of structural steel based on attenuation of laser-induced surface acoustic wave	5
Research on hydrogen-indulced damage detection technology using shear horizontal SH 0 mode nonlinear ultrasonic guided waves	5
DGHR-YOLO: fabric defect detection based on High-level Screening -feature Pyramid Networks and deformable convolution	5
A computationally efficient method for induction motor bearing fault detection based on parallel convolutions and semi-supervised GAN	5
Investigations of strength and quality of clinched joints using digital image correlation	5
Effects of welding defects on the damage evolution of Q245R steel using acoustic emission and infrared thermography	5
Efficient and accurate pulsed eddy current modelling: enhancing BPNN performance through Box-Cox transform	5
A novel pipeline defect detection system with enhanced magnetic moment and focused probe using spatial distance algorithm	5
On the use of X-ray microtomography to control artificial defect geometries produced by metal additive manufacturing	5
Enhancement of neutron radiography resolution through residual hybrid attention network	5
Scattering analysis of linear and nonlinear symmetric Lamb wave at cracks in plates	5
Optimisation strategy for coplanar array capacitance imaging in rotational scanning mode	5
Investigation of early-age concrete strength development using a contactless ultrasonic method	5
Prediction of characteristics of pervious concrete by machine learning technique using mix parameters and non-destructive test measurements	5
Real-time on-line characterization of steel microstructure and mechanical properties using multi-frequency electromagnetic method	5
Enhancing structural integrity of refractories during manufacturing through integration of UPV and acoustic nonlinearity measurements	5
Waveform analysis of acoustic emission signals arising from water absorption of cracked concrete	5
Detection method of the neutral temperature in continuous welded rails based on nonlinear ultrasonic guided waves	5
Exploring the performance of piezoresistive accelerometers: modelling, validation, and optimization	5
Infrasonic leakage signal processing of PE pipeline based on improved AOK-TFR analysis	5
A noise-enhanced machine fault diagnosis method with multi-channel information fusion	5
Detection and localization of corrosion using identical-group- velocity Lamb wave modes	5
Iterative excitation with noise rejection techniques for X-ray computed tomography of hollow turbine blades	5
Crack localisation in composite cantilever beams using natural frequency measurements	5
A robust and computationally efficient guided wave tomography of pipes	5
Surface defect detection of CFRP materials based on infrared thermography and Attention U-Net algorithm	5
A welding defect detection network based on multi-dimensional collaborative enhancement of spatial-frequency features	5
Multi-stage degradation feature with dynamic feedback mechanism for remaining useful life prediction	5
CNN-GRU based method for peak location of reflected Terahertz signals from thermal barrier coatings	5
An ultrasonic approach for characterising subsurface fractures in concrete	5

Study on crack initiation mechanism of notched TC4 titanium alloy plate based on acoustic emission information entropy	5
Research on defect identification method of oil and gas pipeline based on ultrasonic echo signal	4
An ICEEMDAN-WPD based denoising method for MS signals and its engineering application	4
Dispersion behaviour of acousto-ultrasonic signals in HTPB based solid propellants	4
Eddy current conductive coating layer assessment on conductive substrate: a machine learning approach	4
Application of novel deep neural network on prediction of compressive strength of fly ash based concrete	4
Predicting corrosion behaviour of steel reinforcement in eco-friendly coral aggregate concrete based on hybrid machine learning methods	4
Study on the characteristics of self-electric field of adjacent multiple leakage paths embankment dams and dikes under variable water levels	4
Development of ultrasonic phased array technique for inspection of fir-tree type turbine blade root and disc-rim in nuclear power plant	4
Air-coupled transducer tilted C-scan for delamination introduced during the manufacturing process in CFRP plates	4
Assessment of remaining fatigue life based on temperature-evolution measurements	4
An automated detection model of threat objects for X-Ray baggage inspection based on modified encoder-decoder model	4
Low-velocity impact damage detection in CFRP composites by applying long pulsed thermography based on post-processing techniques	4
Detection of microstructural material changes due to hydrogen pressure atmosphere under cyclic load using eddy current testing	4
Fatigue damage detection in welded joints using a sideband peak intensity-based on nonlinear ultrasonic frequency mixing	4
Measurement of core bond strength in reinforced concrete column using magneto rheological fluid assisted Ultrasonic measuring technique	4
Health monitoring of the composite honeycomb insulation panels using thermographic image processing	4
Phase quantification in a duplex stainless steel welds using NDT techniques	4
Surface residual stress detection method for aero-engine blades based on active thermal deformation excitation	4
Development of compact smart bearing and novel hybrid feature assessment for weak defect identification	4
Probability of detection applied to X-ray inspection using numerical simulations	4
Sparse-view CT reconstruction method for in-situ non-destructive testing of reinforced concrete	4
An automatic calibration algorithm for endoscopic structured light sensors in cylindrical environment	4
Generalized Gini indices–enhanced sparsity decomposition for rotating machinery health assessment using a rotary encoder	4
Rail bottom rust localisation imaging monitoring using ultrasonic-guided wave combining with variational modal decomposition and principal component analysis	4
Damage evaluation indexes for cemented tailings backfill based on RA and AF values	4
A subharmonic modulation-based approach for debonding damage detection of composite stiffened plates	4
Bayesian structural damage identification using fraction function regularisation model based on natural frequency and mode shape curvature	4
Defect detection using integration of ultrasonic least-squares reverse time migration and generative adversarial network	4
HE-Yolov8n: an innovative and efficient method for detecting defects in Lithium battery shells based on Yolov8n	4
Determination of the absolute nonlinear parameters using a pulse-echo method in a terminal impedance-mismatched system	4
Measuring thermal and electrical performances of additively manufactured magnetic shielding material: an active thermography approach	4
Non-destructive inspection of interfacial debonding in concrete-filled steel tube bridges	4
Numerical and experimental study of thermography parameters for inspection of composites repaired by CFRP patches	4
Machine learning-driven detection of anomalies in manufactured parts from resonance frequency signatures	3
Effect of flaw orientation on magnetic flux leakage and remote field eddy current inspection of small diameter steel tubes	3
A convolutional state-space framework for wind turbine fault diagnosis using hierarchical feature extraction and dynamic state modeling on SCADA system	3
Decoding nonlinear ultrasonic time-frequency characteristics for fatigue crack quantification and localisation via CNN	3
Electromagnetic (EM) sensor measurement for residual stress characterisation in welded steel plates	3
Experimental analysis of the piezomagnetic behavior of double-shear bolted connections of wire and arc additively manufactured steel	3
A hybrid fault diagnosis scheme for milling tools using MWN-CBAM-PatchTST network with acoustic emission signals	3
Time–frequency dual-domain electromagnetic detection technology for buried pipelines	3
Water transport channel of cement paste modified by hydrophobic agent: X-ray nanotomography based analysis	3
Intelligent recognition method for material removal mode during high-quality ground surface of RB-SiC ceramics based on YOLOv8-Slim-Neck-Ca model	3
Simultaneous ultrasonic guided and bulk wave techniques for detecting the fuels adulteration	3
Aluminium foil micro-defect detection method based on motion-induced eddy current using differential TMR sensor spatial position compensation	3
Inverse problem-solving method applied to the acoustic characterisation of a thin film via the Debye series method (DSM)	3
Enhancing busbar safety: a smart thermal imaging pipeline for real-time load monitoring	3
An improved magnetic dipole model for MFL testing based on non-uniform magnetic charge distribution	3
Prediction of self-healing ability and compressive strength of bacterial-based self-healing concrete using direct method of ultrasonic pulse velocity test	3
Effects of uneven wall thickness of steel pipes on magnetic permeability perturbation testing for internal defects	3
Intelligent defect diagnosis of GIS basin insulator via multi-source ultrasonic fusion	3
Non-destructive compaction quality evaluation of runway construction based on GPR data	3
Preface for special issue “non-destructive testing and structural health monitoring for smart cities”	3
Real-time adaptable fault analysis of rotating machines based on Marine predator algorithm optimised LightGBM approach	3
Research on detecting internal trunk-boring insects in living trees based on BP-UNet	3
Numerical study of length and angle gauging for subsurface-inclined cracks based on reflected surface waves with laser ultrasonic technique	3
Evaluation of local wall thinning severity in a metal pipe using guided microwaves	3
A novel data-driven auto compensation algorithm for pulsed eddy current inspection of high voltage feeder cable pipe	3
Finite element modelling of ultrasonic backscattered waves for improving creep void detection	3
Cyclic aging monitoring of lithium-ion battery based on acoustic emission	3
Defect detection and classification of offshore wind turbine rotor blades	3
Vibration-based structural damage localisation using time response correlation	3
Remaining useful life prediction of rolling bearing based on anomaly correction	3
CNN-based defect detection and classification of PV cells by infrared thermography method	3
Correction	3
Distributed point source method for eddy current modelling	3
Ultrasonic TFM imaging inspection of large complex rings using defect quantitative evaluation mappings	3
Study on the evaluation method for compaction quality of rockfill dams based on seismic wave dispersion characteristics and deep learning	3
Non-invasive detection of hydraulic cylinder leakage using computer vision and time-frequency analysis	3
An incremental permeability detection method for yield strength of ferromagnetic materials based on permanent magnet excitation	3
On cellular automata model of traffic flow with Lennard-Jones potential	3
Automatic detection of microcracks on the surface of special steel wire based on remanence effect	3
Acoustic emission monitoring of stay cable anchorage end and waveguide rod hoop connection method	3
Selectable single-mode guided waves for multi-type damages localization of plate-like structures using film comb transducers	3
Multi-scale contrast-to-noise ratio (MS-CNR): a novel metric for quantitative defect characterisation without manual region specification	3
Unidirectional focusing Rayleigh waves EMAT for plate surface defect Inspection	3
A new small target defect detection algorithm for solar panels based on improved YOLOV7	3
Creep strain prediction in power plant material via ANN modelling of nonlinear ultrasonic test results	2
Leveraging physics-informed neural networks for wavefield analysis in laser ultrasonic testing	2
Analysing the microscopic creep characteristics of carbonate rocks using nanoindentation experiments	2
Real-time structural health monitoring based on measured and simulated data	2
Identification of magnetic anomaly characteristics in stress concentration and macroscopic defects in martensitic stainless steel based on lift off effect	2
Strength, deformation and crack evolution behaviour of cemented tailings backfill composite structures with different strength ratios	2
A method for enhancing the accuracy of industrial bearing surface defect detection	2
Real-time economic following velocity and gear planning for commercial vehicles based on the bi-level optimization	2
Correction	2
Multi-sensor signals augmented multimodal MAML-1DCNN-RBEAM deep transfer learning algorithm for wind turbine bearing fault diagnosis	2
A magnetic Barkhausen noise testing method for corrosion-thinning defects of ferromagnetic components	2
Data-driven models to predict the water-to-cement ratio and initial setting time of cement grouts	2
Effect of strain and excitation conditions on magneto acoustic emission signals in Q235 steel using maximal overlap discrete wavelet transform	2
Efficient and accurate trajectory pose compensation of robot-assisted terahertz system for blade evaluation combining D-H model and machine-learning	2
Quantitative damage assessment of bridge suspenders based on ultrasonic guided wave non-destructive testing and Kriging surrogate model	2
Transformer assisted by DSC and BiLSTM for bearing fault pattern recognition under strong noise interference	2
Evaluation of 3D printed 316L stainless steel microstructure and mechanical property by laser ultrasonics	2