Russian Physics Journal

Article	Citations
Gruneisen Function of Alkali Metals	20
Al–Cr/Y–Al–O Layer Coating Oxidation on Ti–Al–Nb Intermetallic Alloy During Heating and Thermal Cycles	19
Activation Parameters of Viscoelasticity Formation of Nitride-Hardened Refractory Alloy	15
Microstructure and Mechanical Properties of the Ferritic-Martensitic Steel EK-181 After Warm Isothermal Forging	14
Formation of an Irregular Pattern of Localized Plasticity in the Linear-To-Parabolic Hardening Transition	13
Energy Possibilities of Led Heterostructures with Combined Profile Quantum Wells	11
Microstructure of V-4Ti-4Cr Alloy After Deformation by Multi-Directional Pressing	11
Spin light of neutrino in matter	9
Dust matter and pure radiation in a plane gravitational wave	9
Synchrotron X-ray diffraction of phase evolution in Fe–Cr–Al/Zr system during pulsed electron-beam processing	9
Plasma torch nozzle wear after reverse-polarity cutting of aluminum alloys	9
Numerical Simulation of the Stress-Strain State and Failure of Carbon Plates Under Heating	8
Binary Encoding Method in Studying Melting Enthalpy of Ice and Ice-Containing Liquids	8
Effect of multipass friction stir processing on structure formation, mechanical and tribological properties of CuSn6 copper alloy	8
Structure, Phase Composition and Defect Substructure of High-Entropy Alloy Ribbon	7
Numerical simulation of gyromagnetic nonlinear transmission line excitation by a bipolar voltage pulse of nanosecond duration	7
Structure and Properties of a Welded Joint of a Corrosion-Resistant Nickel Alloy Used for Work in Molten Salts	7
Photocurrent of X-ray sensors made of single crystal sapphire and undoped silicon carbide under irradiation by polychromatic X-ray	7
Compact L-band high-power microwave pulse sequence generator with high repetition rate	7
PDMS–MWCNT nanocomposites: mechanical, thermal and electrical properties for soft neuroprosthetic devices	7
Influence of nanosized silicon dioxide on the properties of cement stone matrix: synthesis methods and experimental results	7
Structure and Properties of a Ribbon from FeCoNiSiB High-Entropy Alloy	6
Effect of si content in Ti–Al–Ta–Si–N coatings on their fracture under uniaxial tension	6
Thermal Plasma Synthesis of Anorthite	6
The Role of Stacking Fault Energy of Cu–Al and Cu–Mn Alloys During Their Deformation in Low-Stability States	6

On cuprospinel in contact layers of copper-containing composites in dry sliding against hardened steel under electric current of high density	6
World sheet of continuous helicity spinning particle in 4D Minkowski space	6
Heat Resistance of Surface Layers Obtained by Electron Beam Surfacing with Cr–B Powder Mixtures	6
Justification of the drill bit diameter choice based on numerical modeling of fracture of carbonated kerns with healed cracks	6
The influence of aluminum alloying on microstructure, phase composition, and mechanical properties of chromium-nickel steel obtained by electron-beam additive manufacturing	6
Structure and Mechanical Properties of β Titanium Alloy Wire Produced by Combined Rolling and Subsequent Aging	6
Joint impact of temperature and pressure on the state and properties of a liquid	6
Influence of the Parameters of Middle Frequency Magnetron Sputtering on the Elemental Composition, Microstructure, and Mechanical Properties of Ti–Al–Ta–N Coatings	5
Nanosized Multioxides of Refractory Metals Obtained by Laser Ablation	5
New Wine in Old Bottle: An Improved Perspective on the Greene-Aldrich Approximation for the Generalized Pöschl-Teller Potential	5
Friction and Wear Perfomance of WC Reinforced Aluminum Bronze Produced by EBAM Technique	5
Determination of a Configuration for Sparse Matrix Phased Array Using Simulated Annealing for Imaging in Ultrasonic NDT	5
Methane Heating Based on Magnetocaloric Effect	5
Experimental and Numerical Investigations of Composite Plates Under Impact Load	5
Synthesis of a Si3N4-TiN-Si2N2O-Fe composition by combustion of mixtures of the ferrosilicon-ilmenite-ammonium fluoride system in nitrogen	5
High-speed molybdenum steel: phase composition and thermodynamic and mechanical properties	5
Peculiarities of High-Energy Thermal Effect on Structure and Properties of Surface Layers of Titanium Alloys During Plasma Cutting	5
Application of Ultrasonic Treatment for Increasing the Photochemical Activity of TiO2–Ag Electroexplosive Bicomponent Nanoparticles	5
Structure of the Contact Layers of Steel and Their Deterioration in Dry Sliding Against Steel Under High-Density Electric Currents at Different Turn Ratios of a Supply Transformer	5
Application of meander lines for improving microcontroller reliability under influence of repeating UWB interference pulses	5
Influence of Low-Temperature Superplastic Deformation on the Structural-Phase State and Mechanical Properties of the Ultrafine-Grained VT22 Alloy	5
Tribo-oxidation of multilayer ZrN/CrN coatings under dry sliding friction at elevated temperatures	5
Gauge symmetries and Hamiltonian constraints of a 2 + 1 topological string	5
Rock Cutting by Electric Pulse Method	5
Effects of the urban heat islands during an abnormally warm winter in Tomsk	5
Analysis of wave reflection and strain rates at the interface of a viscous fluid with a solid under various boundary conditions	5
Retraction Note: Evolution of Dislocation Structure of Polycrystals of Homogeneous Copper-Manganese Solid Solutions Under Conditions of Plastic Deformation	5
Structure and Properties of MgAl2O4:Eu3+ and MgAlGaO4:Eu3+ Spinel Ceramics Produced by Radiation Synthesis	5
Simulation by discrete element method using complex particles	5
Comparative study of amorphous and crystalline TiO2 thin films elaborated by sol-gel method for optical waveguiding applications	5
Modified gravity: the game of theories?	5
Modification of Structure and Properties of Surfacing of High-Speed Steel by Electron-Beam Treatment	5
Raman Lidar Sensing of Saturated Hydrocarbon Molecules in the Atmospheric Boundary Layer. Numerical Modeling	5
Structure and Properties of Composite Coatings with Zro2 and Tio2 Particles After Lehceb Treatment	5
QTAIM study of the interactions in di-chalcogenide-bridged homometallic tri-iron carbonyl clusters: [M′2Fe3(CO)10]−2 (M′ = S, Se, Te)	5
Analysis of the Influence of the Parametric Scalar Factor in the Viscoplastic Equation for Determining Intragranular Shear Rates on the Response in Multilevel Constitutive Models of Metals	5
Numerical Study of the High-Speed Impact of a Steel Projectile on a Concrete Target	4
Influence of 3D Printing Parameters of Aluminum–Manganese Bronze by Wire-Arc Additive Manufacturing on the Microstructure and Mechanical Properties	4
Production of Multiply Charged Bismuth Ion Beams in a Vacuum Arc Ion Source with a Submicrosecond Pulse Duration	4
Structure and mechanical properties of Al–5%Mg–Sc–Zr alloy after cryogenic deformation	4
Change in Mechanism of Corona Discharge Formation in Atmospheric Air with a Negative Tip	4
Cyclic Freezing Effect on Silver Nanoparticle Adsorption on Polished Collagen Fiber	4
Simulation of the energy transfer upconversion effect on properties of passively Q-switched laser pulse	4
Wind Instability of Gravitation Waves on Liquid Surface in Finite Pool	4
Dependence of the Acoustic Signal Value on the Energy of a Femtosecond Pulse in Aqueous Aerosol and in Aqueous Aerosol with Silver Nanoparticles	4
Dielectric and Thermal Properties of Cesium Nitrate–Porous Glass Nanocomposite	4
Structural and Fatigue Features of Ti64 Alloy after Different Laser Shock Peening	4
Analytical prediction of absorption threshold frequency in quantum dots by considering the position-dependent effective mass	4
Effect of powder mixture mechanical activation on structure and properties of modified layers	4
Application of unloading slot to assess the stress state in the massif around wells	4

Improved CMA tracking mode algorithm based on eigenvalue, eigenvector, and frequency adjustment	4
Analysis of the Kinetic Model of a Single-Stage Process for Obtaining Titanium Dioxide	4
Theoretical and Real Strength of Crystals: Physical Reason for the Difference	4
Acoustic Properties of Wood Detected by Nanoindentation with Applied Additional Light Oscillatory Load	4
Impact Toughness of High-Strength Low-Alloy Steels Joined by Friction STIR Welding	4
Model of coating synthesis with regard to structurization	4
Impact of Different Weight Fractions of Zinc Oxide Nanoparticles on Polyaniline/Zinc Oxide Nanocomposites for Thermoelectric Applications	4
Simulations of the best thickness and temperature for perovskite CH3NH3SnI3-based solar cells with absorber layers	4
Peculiarities of the structure of low stable states of water and aqueous solutions	4
Instability of the Trichel Pulse Mode in a Corona Discharge	4
Structure formation, friction and wear of composite materials based on aluminum-manganese bronze and nickel-based superalloys	4
On the Construction of a Set of Fundamental Physical Constants of Unit and Zero Dimensions	4
Self-propagating high-temperature synthesis of Ca3N2 with improved nitriding degree and product composition	4
Influence of parameters of nitriding in non-self-sustained arc discharge plasma on structure, properties and phase composition of R6M5 high-speed steel	4
Regimes of Angular Dynamics and Spin Formation of the C59Fe Molecule	4
Influence of Reverse-Polarity Plasma Cutting Parameters on Structure and Surface Roughness of Aluminum Alloys	3
Stokes’ Force for a Stationary Rotating Sphere	3
Shrinkage of ZrO2 green bodies manufactured by vat photopolymerization 3D printing	3
Tribological behavior under adhesion and dry friction conditions of copper-steel composites manufactured by wire-feed electron beam additive technology	3
Dispersion Relation and Power Flux of Chiral Metamaterial Slab Waveguide with Graphene Interface	3
One-level GRBF-based meshless method for nonlinear one-dimensional Fisher equation	3
Implementation of Non-Reflecting Boundary Conditions in the EFES Software Package for Solving Dynamic Contact Problems	3
The Dynamics of a Controlled Streamer Discharge at Moderate Air Pressures	3
Permittivity of magnetic fluids with multiwalled carbon nanotubes under magnetic field effect	3
Heating of additively manufactured polymer composite materials under ultrasonic exposure	3
Designing a Numerical Model of TiAlTaSiN-Based Coating System	3
Effect of Aging Treatment on R Transformation in Nanocrystalline Ti–50.9 at.% Ni Alloy	3
Effect of Polarization on Exciton Properties in a Semiconductor Quantum Dot	3
Features of the Lath Microstructure in the Heataffected Zone of the 09G2S Steel After Manual Arc Surfacing	3
Electron-Beam Surface Processing of Metal Materials Manufactured by Additive Methods	3
Influence of the Percentage of Argon in the Ar–N2 Gas Mixture on the Relative Number of Ar+, N2+, N, and N+ Particles in the Plasma of a Non-Self-Sustained Low-Pressure Glow Discharge With a Hollow Ca	3
Formation of Ultra Fine Grained Microstructure in Aluminum Bronzes of the Cu-Al, Cu-Al-Si, and Cu-Al-Si-Mn Systems After Electron Beam Additive Manufacturing	3
Factor Analysis of Longitudinal Relative Deformations of Aluminum Under Stretching	3
Estimation of the Hubble Parameter Based on the 5D Ross Solution in the Kaluza–Klein Theory	3
Light scattering by ice crystal aggregates in physical optics approximation	3
Interaction of supersonic crowdions with point defects in BCC tungsten: molecular dynamics simulation	3
Theoretical analysis of monochromatic waves propagating in elastic layer with gradient properties	3
Structure and Properties of a Permanent Joint of Ti-6Al-4V Titanium Alloy Formed by Friction Stir Welding	3
Interfacial Distribution of Chemical Elements in Fe–Cr–V–Mn–C Coatings Produced by Electron-Beam Cladding in Vacuum	3
Three-Dimensional Modeling of Electrically Conductive Projectile Interacting with Magnetic Barrier of Speed Sensing Frame	3
Certification of VMM3a integrated circuits for spin physics detector at the NICA collider	3
The Influence of Treatment Modes on Second-Phase Particles of Ferritic-Martensitic Steel EP-823	3
Ni–Mn–In Heusler Alloys Fracture After Plastic Deformation	3
Effect of Relative Air Humidity on the Number Concentration of Aerosol Particles in a Sealed Volume	3
Influence of Layer Number and Thickness of CrAlYN/CrAlYO Coatings on Phase Composition, Structure and Properties	3
Effect of Response Approximation on Accuracy of Surrogate Modeling of On-Chip Spiral Inductor	3
Photoresistance of Wollastonite Powders Modified with Silicon Dioxide Nanoparticles	3
Thermodynamic Modeling of the C90–N2 System	3
Influence of high-temperature thermomechanical treatment with deformation at 900 °C on structural-phase state and microhardness of EK-181 steel	3
Effect of different impact velocities on mechano-luminescence of natural calcite for mechanical sensors	3
Anorthite-Containing Ceramics Based on Secondary Materials	3
Light Diffraction on Inhomogeneous Multiplexed Multilayer Holographic Structures in Photopolymerizing Compositions	3
Structural and mechanical characteristics of high-entropy CoCrFeMnNi alloys manufactured by vacuum induction melting	3
Superluminescence at Nitrogen-Vacancy Centers in the Synthetic Diamond Pumped by Laser Radiation in the Range of 532−575 nm	3
Development and Research of W-Band Multiplier Based on Schottky Barrier Diodes with Pt/Ir Contacts	3
To a Solution of the Model Bethe–Salpeter Equation for the Higgs-Boson Scattering Amplitude	3
Effect of the Sliding Speed and Electric Current on the Wear and Contact Layer Structures of the Steel–Steel Friction Couple	3
Mean-Motion Resonances in the Quadrantid Meteoroid Stream and Dynamic Evolution of Dust Trail of (196256) 2003 EH1	3
The Percolation Model of Viscosity of Colloidal Systems Rubber/Disperse Filler	3
Steady-state current-voltage characteristics and electric field profiles in multi-element HR-GaAs:Cr X-ray sensors	3
First-Principle Investigation of AlSi2P and GaGe2As Crystals	3
Approaches to the Solution of the Lamé–Gadolin Problem for a Composite Hollow Ball Made of Nonlinear Elastic and Elasto-Plastic Materials Under Superimposed Finite Deformations	3
Unified Inflation with Dark Energy in the Nojiri– Odintsov Holographic Model	3
Low-Cost Cell Based on Symmetric Stripline for Soil Permittivity Measurement in the Frequency Range of 0.1–1 MHz TO 5–7 GHz	3
Optimization of combined antenna for operation in oil-insulated environment	3
Effect of Porosity and Viscosity on Biological Fluid Filtration Through a Double-Layer Capillary Wall	3
Monitoring of disturbances in the ionospheric layer as a result of solar flares on 31 Aug 2024 using IIOS station data	3
Evaluation of the possibility of using PCSS in the microwave compressor circuit	3
Wettability, Topography and Chemistry of Composite PLGA/CaP/Ti Scaffolds for Targeted Drug Delivery	3
Influence of the Thickness of Titanium Foils on the Deformation Pattern in ZrO2-Based Metalceramic Composites	3
Performance Enhancement of a Hybrid Solar Still/Photovoltaic System with Mirror Reflectors, Automatic Water Cooling, and Feed Water Preheating	3
Comparison of the structure of grain boundaries and properties of superplastic 40HNU, 47HNM, and 67KN5B alloys	3
Autowave Description of the Lüders and Portevin–Le Chatelier Phenomena	3
Structure and Properties of a High-Entropy Alloy Saturated With Boron by the Additive Method	3
Studies on Up-Conversion Photoluminescence Exhibited by Er3+-Doped Akermanite (Di-Calcium Magnesium Silicate) Phosphors	3
Numerical Simulation of Temperature Field Dynamics in Single-Crystal Silicon at Repetitively-Pulsed High-Intensity Ion Implantation and Energy Impact on the Surface Layer	3
Properties of the Lorentz Force in the Earth’s Natural Magnetic Field	3
Polarizability of Microparticles in Relativistic Field Theory	3
Cathodoluminescence of Nitrogen-Containing Diamond Samples at Temperatures of 80–800 K	3
Franck–Condon Factors for Allowed Transitions in N2 and N2+ Molecules	3

Partial Discharge Inception Mechanisms in Oil Shales	3
Heat Engine Based on Rotating Fullerenes C60 and C80	2
Stepped single-slope solar still using MWCNT nanofluid and nano-enhanced PCM	2
Grain boundary engineering approaches for the structure optimization in commercial copper M1	2
Synthesis, structural analysis and studies of a novel Tutton’s salt—AZNSH crystal (NH4)2M(SO4)2.6H2O (M = Zn, Ni) grown by slow evaporation solution growth method for varied electronic and varied sens	2
Physical basis of methodology for estimating depth profiles of mass phytoplankton concentration in the upper oceanic layer	2
Cathode Plasma Expansion at Early Vacuum Arc at Pulsed Plasma Emission	2
Structural and phase composition parameters of advanced nanomaterials based on zirconium dioxide for dental restoration	2
Metallic Conductivity in the Nanoporous Silicon Layers on the PZT-Ceramics Surface	2
Formation of structure and properties of superalloys during electron-beam additive manufacturing	2
Modification of AISI 420 Steel under Repetitively Pulsed Energetic Impact on the Surface of a Powerful Ion Beam of Submillisecond Duration	2
Phase Evolution in Multicomponent Ceramic Solid Solutions	2
Production of a Chargino Pair in Muon Colliders. Part I	2
Analysis and Characterization of Metamaterial Structure	2
Relative Bond Strengths of the f-, s-, and d-Electrons of Rare Earth Elements	2
Method for Determining the Crack Resistance of a Square Section Beam	2
Obtaining of Bimetallic Product from Nickel Superalloy and Heat-Resistant Bronze by Wire-Feed Electron Beam Additive Manufacturing	2
Influence of Striker Rotation on the Process of Normal Interaction with Multilayer Barriers	2
Cylindrical Streamers Formed in Air and Nitrogen at Low Pressures	2
Impact of surface tension, viscosity and flow rate on air bubble formation in aqueous methanol at temperatures 293.15, 303.15 and 313.15 K	2
Influence of the initial state of beryllium bronze on its structure organization and properties during friction stir processing	2
The effect of cold rolling on microstructure and mechanical properties of high-nitrogen austenitic steel	2
Creep Behavior of Particulate Polyimide and Polyetherimide Based Composites Under Fatigue	2
Interband Multiphoton Absorption of Polarized Radiation and Its Linear Circular Dichroism in Semiconductors in the Kane Approximation	2
Analytical Solutions of the Schrödinger Equation with Generalized Hyperbolic Cotangent Potential for Arbitrary l States Via the New Quantization Rule	2
Effect of Ultrasonic Impact on the Macrostructure and Strength of Dissimilar Aluminum and Titanium Alloys Joints Produced by Friction Stir Welding	2
Regularities of Structure Formation and Properties of Composite Materials Based on Aluminum–Manganese Bronze Produced by Electron Beam Additive Manufacturing with the Addition of Iron, Nickel, and Tun	2
Pattern Formation in a Nonlocal Fisher–Kolmogorov–Petrovsky–Piskunov Model and in a Nonlocal Model of the Kinetics of an Metal Vapor Active Medium	2
Dynamics of Spinning Particles in a Vortex Gravitational Field	2
Development of low-temperature Stirling engine for autonomous solar cogeneration plant	2
Influence of the Aging Temperature on the Mechanical Characteristics of the Nanocrystalline Ti–50.9 at.% Ni Alloy	2
A Study of Complex Defect Formation in Silicon Doped With Nickel	2
Glucose concentration detection using photonic crystal-based biosensors	2
Effect of holding time at 900 °C on the microstructure and mechanical properties of additively manufactured ti4Al3V alloy	2
Interaction Between Electron Beam and Electromagnetic Field in Terahertz Multiwave Cherenkov Generator with Diffraction Reflector	2
Coaxial Interaction of a Rigid Ring with an Elastic Cylinder	2
Influence of tungsten carbide tool wear on resulting joint during friction stir welding of titanium alloys	2
Development of PMMA nanocomposite thin films comprising semiconductor nanocrystals	2
Numerical Assessment of Electrical and Magnetic Characteristics of Elastomer Composites	2
Heat treatment effect on Nb-Al powder mixture after different durations of its high-energy mechanical activation	2
Low-Energy Interactions of Natural Processes as Energy Systems	2
Effect of rolling on the structure and mechanical properties of the Zn-0.8Li alloy	2
Analytical Solutions of the Algebraic Equations of the Theory of Spatial Transitions of Atoms. The Hydrogen-Like Atom	2
Studying the Physics of Vertical Transfer of Emissions from Industrial Enterprises in the Surface Layer of the Atmosphere	2
Effect of V, Nb, and Mo Impurities on the Stability of Titanium Phases	2
Multiferrroics of (1 – x)BaFe12O19 – xBaTiO3 and (1 – x)CoFe2O4 – xPb(Zr0.53Ti0.47)O3 Compositions with a Template Structure	2
Physical and Chemical Peculiarities of Water-Repelling Surfacing of Cement and Concrete Products	2
New Measurement Method of Thermal Conductivity of Fluids	2
Dynamics of the temperature on the surface of the TiCuN (coating)/A7 (substrate) system upon irradiation with a pulsed electron beam	2
Vibration and thermodynamic properties of the simple metal surfaces: DFT calculations	2
Microwave–vibration curing of silica-reinforced epoxy/jute/kenaf hybrid composites: Mechanical properties and moisture absorption behavior	2
Influence of Friction Surface Direction of the Heterogeneous Composites Based on Cu-Fe for Tribological and Mechanical Behavior	2
Structure and phase composition of hypereutectoid steel rails after continuous operation	2
Specifics of ice cover measurements using global navigation satellite system reflectometry	2
Molecular Dynamics of C60 inside a Carbon Nanotorus	2
Switching Parameters of Two Parallel Photoconductive Switches Under 355 nm Laser Radiation	2
Luminescence Control of Led Heterostructures Grown by Method of Metalorganic Vapor Phase Epitaxy on Sapphire	2
Influence of UV radiation intensity on silver nanoparticle synthesis by cavitation-diffusion photochemical reduction	2
Surface Treatments and Residual Stress: Assessing the Implications for Biocompatibility in Titanium Implants	2
Features of the Structure Evolution and Phase Transformations During Annealing of the VT22 Titanium Alloy Depending on the Initial State	2
Fe–Cu nanoparticle-modified calcium phosphate coatings: enhanced antimicrobial and biocompatibility properties	2
Retraction Note to: A comprehensively improved particle swarm optimization algorithm to guarantee particle activity	2
Magnetron Sputtering Deposition of Intermetallic Coatings Using Tin and Niobium Plasma	2
Effect of Electromechanical and Ultrasonic Impacts on Fatigue Performance of Titanium Alloys	2
Calculation of the properties of a rectangular waveguide exposed to 8-mm wavelength microwave radiation	2
Study of structural characteristics and mechanical properties of ceramic composites based on ZrO2-20%Al2O3 manufactured by additive method	2
On Green’s Functions for Isotropic Metamaterials	2
Deformation Stages of Austenitic Cast SteeL 60Cr24NMn16 Under Different Boundary Loading Conditions	2
Development of Eu-doped NaCa(PO3)3 red-emitting phosphors for WLED applications	2
Deformation and deterioration of C235 steel contact layer in dry sliding against C45 steel under high density alternating current	2
DC Magnetron Discharge with Pure Calcium Target	2
Use of Impact Treatment for Structural Modification and Improvement of Mechanical Properties of CuAl7 Bronze Obtained by Electron Beam Additive Manufacturing (EBAM)	2
Hermit Functional Polynomials as a Tool for Solving Inverse Problems	2
Rail Structure after Extremely Long Operation	2
Features of Shear Crack Growth Dynamics in Heterogeneous Brittle Materials	2
Dynamic Evolution of Space Objects in the GEO Region and its Vicinity	2
Correction of the W Boson Mass	2
Elastic deformation of the cylinder in the case of axisymmetric strapping with angular lines	2
Influence of focused ultrasonic waves on temperature inhomogeneities of air	2
The Capacitive Storage Charging Voltage Influence on the Output Parameters of Accelerator Based on a Pulsed Transformer	2
Interference of vortex optical beams in a turbulent atmosphere	2
Potential energy surfaces and phase transitions	2
Geant4 models for integrated cross sections of gamma-quanta and nuclei interaction	2
Hyperparameter Optimization in Machine Learning Algorithm for Extrapolation of Variational Calculations	2
Synthesis of the Fe–Cr–Al–Zr Surface Alloy with an Amorphous Transition Layer	2
Error in Measuring the Permittivity of Conducting Media by the Broadband Method	2
Effective Principal Quantum Numbers of Hydrogen-Like States Belong to the Set of Common Fractions	2
Joint Application of Remote Sensing Data and Ground-Based Climate Monitoring System in Agriculture	2
Direct simulation of dislocation slip and twinning in hcp single crystals with the [0001] load axis	2
Structure and deformation behavior in stainless/carbon steel composite	2
Simulation of nuclear relaxation in Geant4 hadronic physics	2
Thermal stability of the microstructure and microhardness of ferritic-martensitic steel after controlled thermomechanical treatments	2
Structure-Phase Status of the High-Entropy AlNiNbTiCo Alloy	2
Effect of Structural-Phase State on Young’s Modulus of a Nickel Corrosion-Resistant Alloy	2
RETRACTED ARTICLE: Evolution of Dislocation Structure of Polycrystals of Homogeneous Copper-Manganese Solid Solutions Under Conditions of Plastic Deformation	2