Process Safety Progress

Article	Citations
Using credible failure rates for SIS ensures process safety: A summary of the panel discussion	31
Cause analysis framework from a safety capability perspective: Application to Tianjiayi hazardous chemical explosion accident	21
Issue Information	17
Correction to “Error propagation and uncertainty analysis: Application to fault tree analysis”	16
Winter 2022 Safety and Health News	16
Correction to Book Review of “Fire Protection Handbook®: National Fire Protection Association ( NFPA ). Vol 1 and 2. 21st ed. 2023. p. 3800. $749.	15
Advanced consequence modeling and risk analysis	15
Using gamification to develop process safety culture at Vale	14
Flame morphology of dual jet fires ejected from a spherical tank	14
Risk analysis of climate change effects on chemical processes	12
Numerical study of failure modes of hazardous material tanks exposed to fire accidents in the process industry	12
Hazards of lithium‐ion battery energy storage systems ( BESS ), mitigation strategies, minimum req	11
Causation analysis of fire explosion in the port's hazardous chemicals storage area based on FTA‐AHP	11
Consequence analysis in industrial organizations containing H 2 S	11
Hazard and operability study of cryogenic hydrogen circulation systems in China Spallation Neutron Source Phase II project	10
Chemical compatibility of fuming nitric acid, fuming sulfuric acid, and their mixtures with metals	9
Process safety in bioenergy with carbon capture and storage systems (BECCS)	8
Modified analytic hierarchy process for risk assessment of fire and explosion accidents of external floating roof tanks	8
Process Safety for Engineers: An introduction, second edition. By Center for Chemical Process Safety (CCPS), Hoboken, NJ: John Wiley & Sons, Inc. 2022. pp. 514. ebook ISBN: 978‐1‐119‐83100‐6; $138	8
Reliability in mass alert system for dam emergencies: Case study of Vale S/A	8
Flammable hazards of BESS failures	8
Managing the risk of continued operation with out‐of‐service safety instrumented system devices	7
Leading by example: Culture, leadership, and accountability	7
Risk‐based facility siting of CO 2 pipelines	7
	7

	7
Issue Information	7
Decision‐making regarding safety investments: A case study of fluidized‐bed reactors	7
Decision‐making analysis in post‐fire and explosion aftermath assessment tool: A fuzzy cognitive mapping approach	7
The effectiveness of behavior‐based safety observation program (BSOP) in the chemical manufacturing industry	7
Experimental evaluation of restricted lift effects on pressure relief valve stability and system dynamics	7
Issue Information	7
Building proactive organizational resilience against the risk of major process safety incidents	6
Issue Information	6
Toward fundamental improvements to engineering models for gas explosions in complex geometries by utilizing experimental results in conjunction with highly resolved numerical simulations	6
In memory of Joseph F. Louvar, 1935–2023, former Editor‐in‐Chief of Process Safety Progress	6
Risk assessment of solid desiccant dehydration package system using safety integrity level‐based safety instrumented system design approach	6
Statistical concepts and data requirements for valid failure rate estimation	6
Issue Information	6
Managing safety critical equipment and design performance standards in major capital projects ‐ BP mad dog 2 project	6
Thermal in‐breathing of atmospheric storage tanks for Power‐to‐X applications	6
AIChE 's Center for Chemical Process Safety: Forty years driving process safety globally	6
	5
Analysis and improvement of hot work management in China	5
Issue Information	5
Inhibition behavior and heat transfer of flame spread over liquid fuel with the influence of a step obstacle in the gas phase	5
Machine learning boosted first principles model predictions of DSC decomposition energies for early‐stage material screening	5
The evergreen process hazard analysis: An essential next step	5
Human factors analysis of a fatal gas explosion on June 13, 2021 in Shiyan City, China	5
Research on the frequency of battery energy storage system failures	4
Risk assessment of an offshore green hydrogen production system	4
Exploring the effects of automation malfunction on team communication and coordination in ships' engine rooms	4
Risk assessment of LNG bunkering vessel operation based on formal safety assessment method	4
	4
Ammonium nitrate & fertilizer safety. By Kishore D.Shah. Fertilizer & Nitrate Safety. 2022. pp. 294. ISBN: 9781914584213. £80 (hardcover), www.FertilizerAndNitrateSafety.com	4
	4
Size‐dependent failure behavior of commercially available lithium‐iron phosphate battery under mechanical abuse	4
Modeling and risk analysis of large‐scale crude oil pool fire on an offshore facility	4
Measuring the safety climate in China's chemical industry and investigating the influencing factors: A case study of a large enterprise	4
A holistic risk identification approach for LPG storage systems using a combination of HAZOP , fuz	4
Implementation of quantitative risk and cost–benefit analysis in an aging offshore facility	4
Improving pressure relief device (PRD) inspection intervals through critical industrial accident analysis and field investigation in Korea	4
	4
Omission of important concepts in two articles on laboratory safety in PSP, Vol. 42, No. 4 December 2023	4
MOC 102: Get more out of MOC systems than “just managing changes”	4
Legend of process safety	4
	4
A gas detector planning method that considers the area and zone based on the range of influence of chemicals with high vapor pressure	3
Process Safety Division News	3
A risk‐based evaluation of safe distance for a hydrogen refueling station	3
AI‐PSM: Where are we now?	3
Change of location class in gas pipelines from a regulatory perspective	3
Risk identification of integral pressurized water reactor (IPWR) cooling system using a combination HAZOP, FMEA, and FTA methods	3
Optimization of QRA tools & Power BI interrogation to support agile risk‐informed decision‐mak	3
Issue Information	3

Risk assessment method in relation to coal mine gas explosion based on safety information loss	3
ENPS 101—Back to school for process safety	3
Explaining persistent management of change underperformance in a safety‐critical gas organization	3
A new look at safety metrics in a world of evolving operational practices	3
Expanding from LOPA to quantitative bow tie analysis	3
	3
Young professional's integration framework in process safety management, based on the lean principles	3
Consequences analysis of a natural gas pipeline: The case of the trans‐Anatolian natural gas pipeline	3
Exploring key safety terminology through simulation: Definitions and practical insights	3
Application of process safety management principles to laboratory safety management	3
Application of machine learning methods for process safety assessments	3
Diagnosing electrostatic problems and hazards in industrial processes: Case studies	2
Kinetics for the sulfuric acid‐catalyzed reactions of ethylene oxide with water and ethylene glycols	2
A review of fire mitigation methods for li‐ion battery energy storage system	2
Environmental, social, governance: The future of process safety management or repeat of the past?	2
Developing offshore fatigue assessment application to measure fatigue among offshore workers in Malaysia	2
Issue Information	2
Issue Information	2
Process Safety Primer—June 2023	2
Simplified approach for making risk decisions in a fast‐paced business environment	2
The role of motivation in human performance and in minimizing the impact of human error	2
Adaptive thresholds‐based leak detection using real‐time transient modeling of two‐phase flows	2
Risk assessment of liquid ammonia tanks based on Bayesian network and Probit model	2
On the use of AI chatbots for process safety	2
Machine learning‐based risk assessment of heavy fuel oil leakage during handling operations: A case study of a thermal power plant	2
Process hazard evaluation for the epoxidation of soybean oil with calorimetry techniques	2
Incident investigation as a key tool in risk management	2
An introduction to system safety engineering. By Nancy G.Leveson, Cambridge, MA :The MIT Press. 2023. ISBN 9760262546881|ISBN 9870262376761 (epub). $75.00 H	2
Important safety considerations for arrangement of flammable storage tanks: Thermal radiation effects with meteorological conditions	2
Performance evaluation of safety barriers based on multidimensional deconstruction	2
Red Squirrel Tests: Air Products' ammonia field experiments	2
Issue Information	2
Experimental study on the effects of N2 and CO2 inerting on methane–ethane–air deflagrations	2
Info for Authors	2
Experimental evaluation of individual effects of water mist spray characteristics on thermal radiation attenuation using twin‐fluid nozzles with full‐cone spray pattern	2
“We'll know we have a problem, and we'll fix it!” – Overestimating human response as a safeguard	2
Development and application of process safety competency framework in agroindustry: A case study	2
Understanding and managing hazards of lithium‐ion battery systems	2
Study of explosion relief mechanisms in lateral explosion relief conduits of gas pipelines	2
Overview of Li‐ion battery energy storage system failures and risk management considerations	2
Safety and Health News	2
Concurrent design error, poor welding, and code inadequacy cause jet‐FIRE on a topping column	2
Experimental study of explosion overpressure and flame propagation of micro‐sized and nanosized iron powder	2
Integrating cybersecurity into the risk‐based process safety (RBPS) program	2
The legacy of the Mary Kay O'Connor Process Safety Center	2
So, you cannot vent: A deep dive into other explosion protection methods	2
Computer‐aided design of insect‐repellent formulation with inherent safety assessment	2
Artificial intelligence (AI) and process safety: Some cautionary observations	2
Evaporation of anhydrous ammonia from small concrete coupons and implications regarding evaporation from a large accidental spill on concrete	2
Lessons from an explosion accident in Linyuan Petrochemical Park of Taiwan: From the perspectives of process safety management	2
Influence of the flammable cloud geometry on the gas explosion effects	1
Emerging challenges for the safe transportation of lithium batteries	1
Managing the risk of MOC	1
Toward sustainable process safety management 4.0 versus process safety management	1
Info for Authors	1
Retrospective on the risk matrix, part II: Mathematics	1
Issue Information	1
Analysis of a third‐party action incident in a gas pipeline: A case study of the Cuiabá Lateral Pipeline in Brazil	1
Research on safety management of university chemical laboratory based on inherent safety review	1
Explosion mitigation of methane–air mixture in combined application of HFC‐227ea/CO2 and ultrafine water mist in the pipeline	1
A summary of the investigation report on the Luxi explosion incident (May 1, 2023)	1
Improving process safety culture through developing and maintaining the sense of vulnerability at all levels in the organization	1
Verification of intrinsic safety on instrumentation loop	1
Correction to “A gas detector planning method that considers the area and zone based on the range of influence of chemicals with high vapor pressure”	1
Ammonia as a safe alternative for transporting hydrogen	1
MOC 101—Fundamentals for effective change management	1
Embracing the future of chemical engineering: Energy transition to hydrogen	1
Influence of the opening pressure of explosion‐venting surface on methane deflagration characteristics in municipal sewage confined spaces	1
Dispersion modeling: Think before you model	1
Lessons learned from the Barracas accident: Ammonium nitrate explosion during road transport	1
Issue Information	1
Dust explosion hazards in animal feed production in Brazil: A process safety review	1
Safety and Health News	1
Study on statistical indicators of economic loss of major chemical accidents	1
A detailed study on heat of reaction and heat rate determination of nitrobenzene hydrogenation to aniline reaction using power compensation reaction calorimeter	1
Introductions from the new editors of Process Safety Progress	1
Issue Information	1
Hydrogen jet explosion: New tests, blast, and fireball models	1
Improving Process Hazard Analysis (PHA) outcomes to better manage critical controls in mining industry: From PHA to verification in the field	1
An unexpected explosion while fumigating a grain silo: It wasn't the dust	1

	1
	1
Workplace accident analysis in the Algerian oil and gas industry	1
Lessons learned in confined space entry management after a gas poisoning accident in China	1
Info for Authors	1
Importance of “SMART valve positioners” in testing of final control elements in safety instrumented systems application	1
“Selling” process safety concepts for non‐PSM applications	1
Evaluation of risk associated with treatment of fat, oil, and grease: Grease interceptor from food processing industry effluent using bowtie analysis	1
Application and challenges of layers of protection analysis (LOPA) in mining processes: Insights into benefits and limitations	1
Considerations for the safe handling and processing of unstable materials	1
Firewater fuel tank integrity under blast loads from vapor cloud explosions	1
Blue skies, green risk matrices: Managing the hazards associated with air pollution control equipment	1
Accident consequence assessment of benzene leakage from storage tank in a chemical park in Bengbu City, China	1
The growth of process safety practice in China	1
From theory to practice: Implementing safe operating limits in major hazard facilities	1
Understanding the depressurization system design	1
Correction to “Learning from accidents: Nontechnical skills deficiency in the European process industry”	1
Structural response for vented hydrogen‐air deflagrations: Effects of volumetric blockage ratio	1
Remembering Dr. Hans Fauske	1
	1
Comprehensive risk assessment approach for storage tank facilities against hazards including fire, explosion, and earthquake	1
Thermal modeling for supporting firefighting and emergency response planning	1
From organizational failure to systemic prevention: A 24Model analysis of university laboratory accidents	1
Dynamic process safety barrier management system based on risk hierarchy	1
Energy transition technology comes with new process safety challenges and risks—What does it mean?	1
Statistical analysis of laboratory accidents in Chinese universities from 2011 to 2021	1
An integrated system theoretic process analysis with multilevel flow modeling for the identification of cyber‐physical hazards in a process industry	1
Importance measures for performance shaping factors of human reliability analysis	1
Issue Information	0
Issue Information	0
Strong degradation of polycarbonate and polystyrene by the CO2 capture solvent diethyl sebacate	0
	0
	0
The 1969 Rocky Flats fire – We should not forget	0
Safety considerations for hydrometallurgical metal recovery from lithium‐ion batteries	0
A tale of two MOCs: An adventure fable outlining the constant danger of not following proper process safety protocol	0
Evaluation and design of structures to contain lithium‐ion battery hazards	0
Operational readiness: Good practices for process plant start‐up to avoid process safety accidents	0
Only the best is good enough: Managing the risks of glass in hazardous service	0
Spring 2023 Safety and Health News	0
Damage mitigation method studies through simulation modeling of chemical accidents	0
The applications of gas chromatography–mass spectrometry ( GC – MS ) in process safety	0
Boiling combustion behaviors and heat feedback of pool fire of diesel fuel–water emulsification	0
Open source pressure vessel blowdown modeling under partial phase equilibrium	0
Flame behaviors and explosion characteristics of two‐phase propylene oxide/air mixture under different ambient pressures	0
Inherently safer design: Success stories	0
HAZOP, FMECA, monitoring algorithm, and Bayesian network integrated approach for an exhaustive risk assessment and real‐time safety analysis: Case study	0
Evolutions of the LOPA method to a fully quantified method	0
Status of the Process Safety Division Newsletter	0
It all adds up…the impact of cumulative changes on safety and production	0
Building design requirements for multi‐hazard protection	0
Safety instrumented system design with credible failure rates: The key to achieving plant safety	0
An overview of PHA templates and checklists developed for a refining system and lessons learned	0
Under investigation; wanted, missing Risk‐Based Process Safety elements	0
Denials, delusions, and bias	0
Dynamic barriers monitoring in the mining industry and its contribution to process safety	0
Integrating operational and organizational change management—Success in the organizational cultural environment	0
An alternative methodology addressing United Nations classification type for self‐reactive substances	0
Consequence analysis, layer of protection analysis, and bow‐tie as strategies to prevent accidents	0
Editorial—Special edition—Papers from the Latin American Congresses on Process Safety 2021 and 2022	0
Info for Authors	0
Dispersion evaluation of hydrogen sulfide inclusion in a cryogenic distillation pilot plant	0
What is in a name?	0
Emergency management capability evaluation of chemical parks based on PFDEMATEL‐G1 and PFTOPSIS	0
Light transmission and deposition rates in combustible dust clouds	0
Process safety analysis using operational data and Bayesian network	0
Battery failure analysis and characterization of failure types	0
Industrial emergencies caused by extreme wind	0
Dynamic risk analysis of flammable liquid road tanker based on fuzzy Bayesian network	0
Introduction to grid‐scale battery energy storage system concepts and fire hazards	0
Crossing river oil pipeline spill emergency response plan automatic association study based on Apriori‐Topsis	0
Supporting the transfer of knowledge in high‐risk major accident environment	0
Safety assessment of wellhead devices on the offshore platform in a shallow gas blowout accident	0
Total loss of primary containment reporting to improve environmental, social, and governance, sustainability, and process safety performance	0
Application of quantitative risk analysis to fireproofing	0
Digital twin technology and ergonomics for comprehensive improvement of safety in the petrochemical industry	0
Hydrogen safety effect calculation (dispersion and thermal radiation effects) for determination of siting and safe distance	0
Safety attitudes among workers in Malaysian chemical manufacturing plants	0
Ventdef: A new engineering model for vented gas deflagration based on NFPA 68 (2018)	0
ISD (inherently safer design) considerations for blue ammonia projects	0
Tributes to Robert Rosen, long‐time editorial board member of Process Safety Progress	0
	0
Just a human error…? Case study of a condensate vessel explosion	0
National strategies for coordinating process safety and COVID‐19 pandemic control in China	0
Why the term “operational discipline” is not helpful, and better options for instilling positive process safety culture	0
Explosion incidents associated with comprehensive studies on methyl ethyl ketone peroxide under thermal decomposition: A review	0
A quantitative deployment scheme of hazardous gas detector	0
Centralized gas detection and alarm management platform at Usiminas	0
Experimental study on the explosion‐resistant performance of blast walls and doors of gas facilities	0
PHA evaluation using loss prevention principles from RAGAGEP	0
Very lean hydrogen vapor cloud explosion testing	0
Flame propagation and explosion characteristics of food‐based dust as a function of dust concentration	0
ALARP demonstration in management of change using quantitative Bowtie analysis risk assessment tool for an offshore gas platform	0
Process safety at anaerobic digestion sites and its workplace impact: A rapid review	0
Analysis and evaluation of thermal hazards for 2,2′‐azobis (2‐imidazoline) dihydrochloride (AIBI) and its mixtures with incompatible substances	0