Instrumentation Science & Technology

Papers
(The median citation count of Instrumentation Science & Technology is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Determination of gaseous formaldehyde by derivatization using magnetic multiwalled carbon nanotubes (MWCNTs) modified with 2,4-dinitrophenylhydrazine (DNPH) and high-performance liquid chromatography 25
Multiple object characterization of recyclable domestic waste using binocular stereo vision18
Particle collection using a Lamb wave device with a non-piezoelectric glass substrate13
Novel microsampling system for automated spectrophotometry12
Determination of vancomycin in plasma with a magnetite amino silica adsorbent prepared from rice husks and high-performance liquid chromatography—tandem mass spectrometry (HPLC-MS/MS)12
High sensitivity optical fiber temperature sensor based upon a polydimethylsiloxane filled Fabry-Perot interferometer11
Data acquisition in powder X-ray diffraction measurements using an area detector9
Hybrid spectrum conjugate gradient algorithm in electromagnetic tomography9
Potentiometry lipid membrane based electronic tongue for the classification of mint in tea by principal component analysis (PCA) and linear discrimination analysis (LDA)9
Inexpensive multispectral imaging device8
Novel, compact electrochemical and impedance instrumentation8
LabView based virtual calorimetric etching solution analyzer (CESA) for the online quantification of hydrogen peroxide for the semiconductor industry8
Highly sensitive gold-film surface plasmon resonance (SPR) sensor employing germanium selenide (GeSe) nanosheets8
On-orbit calibration based upon star observation to correct thermal deformation of geostationary optical satellites8
Determination of fatty acids in Allium tuncelianum (Tunceli garlic) by gas chromatography with flame ionization detection (GC–FID)8
Monitoring relative humidity using a Mach-Zehnder interferometer (MZI) senor based upon a photonic crystal fiber (PCF) coated with polyvinyl alcohol (PVA)8
Outdoor environmental sensitivity test for the detection of biological aerosols7
Calibration and error analysis of an arc detector for wide-angle X-ray scattering (WAXS)7
Optimization of sample thickness for small angle X-ray scattering (SAXS)7
Design and evaluation of a volatile particle remover combining hot dilution and a thermodenuder7
Low-cost digital microfluidic approach on thin and pliable polymer films7
Self-regulating pen-needle-based micronozzle for printing array of nanoliter droplets under fluorinated liquid6
Unmanned aerial vehicle for magnetic detection of metallic landmines in military applications6
Cadmium selenide and carbon nanodots modified magnetite nanospheres for the magnetic solid-phase extraction (MSPE) of malachite green prior to spectrophotometric determination6
Characterization of the sensitivity of a surface plasmon resonance (SPR) fiber optic sensor composed of silver and nickel oxide layers6
Low-cost radon monitoring with validation by a reference instrument6
Thin-core fiber-based Mach-Zehnder interferometer sensor for monitoring temperature, pressure, and humidity6
Nanostructure silver absorbance with polarized light spectroscopy (PLS) and mobile imaging5
Surface plasmon resonance (SPR)-based D-shaped photonic crystal fiber polarization filter and refractive index sensor with a hexagonal pore structure5
Inexpensive spectrophotometric determination of nitrite with a laboratory-constructed flow cell5
Properties and suitability of liquid electrode plasma optical emission spectrometry (LEP-OES) for the determination of potassium, lithium, iron, and zinc in aqueous sample solutions5
Early diagnosis of dental pathologies by front face fluorescence (FFF) and laser-induced breakdown spectroscopy (LIBS) with principal component analysis (PCA)4
Structural simulation and performance evaluation of self-priming electrostatic diesel vehicle emission particle sensor4
Artificial intelligence (AI) based system for the diagnosis and classification of scalp health: AI-ScalpGrader4
Effects of nanometric plastic strain on the cantilever deflection sensitivity calibration accuracy for atomic force microscopy (AFM)-nanoindentation tests4
Characterization of the chemical shift and asymmetry indices of praseodium, neodymium, samarium, gadolinium, and terbium compounds by wavelength dispersive X-ray fluorescence (WDXRF)4
Design and performance characterization of the time-of-flight liquid neutron reflectometer at the China spallation neutron source4
Gamma ray characterization of the albedo of atmospheric dust from Southeast Anatolia, Turkey4
Reconstruction of absorption tomography from limited data based on attention mechanism and U 2 net structure4
Temperature control algorithm for polymerase chain reaction (PCR) instrumentation based upon improved hybrid fuzzy proportional integral derivative (PID) control3
Sensitive monitoring of refractive index by surface plasmon resonance (SPR) with a gold α-iron (III) oxide thin film3
Fiber-optic sensor based on a Mach-Zehnder interferometer (MZI) and anti-resonance reflective optical waveguide (ARROW) for simultaneous measurement of temperature and pressure3
Sequentially automated extraction of nucleic acids with magnetophoresis in microfluidic chips3
Noninvasive diagnosis of type 2 diabetes mellitus by hair analysis using laser-induced breakdown spectroscopy (LIBS)3
High sensitivity temperature and pressure sensor based on cascaded Fabry-Perot and Sagnac interferometers3
Portable optical instrumentation for the evaluation of the onsite antioxidant scavenging capacity assay3
Conceptual design of a simple small angle X-ray scattering (SAXS) beamline3
Characterization of matrix effects for Pb L-shell energy dispersive X-ray fluorescence (EDXRF) in binary compounds of cadmium, copper, molybdenum, and zinc3
Optical fiber refractive index sensor based on the double cladding fiber3
Determination of carcinoembryonic antigen (CEA) by surface plasmon resonance-enhanced total internal reflection ellipsometry (SPRe-TIRE)3
Magnetic field sensing with in-fiber cascaded Fabry-Perot interferometers (FPIs) using femtosecond laser direct writing3
Microreactor for the characterization of zeolite hydrothermal synthesis by small angle X-ray scattering (SAXS)3
Supervisory system for automated simulated moving bed (SMB) liquid chromatography (LC)3
Strain optical fiber sensor with modified sensitivity based on the vernier effect3
Low cost automated instrumentation for the measurement of the specific surface area of powders by the Brunauer–Emmett–Teller (BET) method3
Double-sided photonic crystal fiber (PCF) temperature and refractive index (RI) sensor based on surface plasmon resonance (SPR)3
Development of a fog droplet sampler with multi-segment structure and specific temperature control2
DC current sensor based upon a fused fiber optic Fabry-Perot interferometer (FPI) and copper wire2
Magnetic field generator for the calibration of magnetometers and electromagnetic compatibility (EMC) and electromagnetic interference (EMI) compliance2
Magnetically tunable fiber polarization beam splitter2
Temperature-compensated DC magnetic field sensor based upon a microcapillary resonator2
Integrated and intelligently controlled unit for suspension freeze concentration: design and experimental verification2
Impact of the cloud zenith angle of the pickup coil upon the sensitivity of a flexible rosette eddy current sensor2
Low cost switching circuit for van der Pauw resistivity and Hall measurements at various temperatures2
Design, development, and validation of a novel static horizontally aligned drug diffusion cell (Shan DDC) for in vitro drug assessment2
Magnetic solid‐phase extraction of nickel(II) as the 2‐(5‐bromo‐2‐pyridilazo)‐5‐(diethylamino)phenol chelate on magnetite@methacrylic ester copolymer prior to high‐resolution–continuum source flame at2
Temperature imaging by tunable diode laser absorption spectroscopy (TDLAS) with a 64-element array sensor2
Activated carbon from green walnut shells as the adsorbent for the solid-phase extraction of indigo carmine from food and textiles2
Determination of hepatitis B virus (HBV) DNA in serum by nucleic acid screening2
Correction2
Compact turnkey system for multi-contact diode lasers for portable spectroscopic applications2
Speciation and preconcentration of chromium in real samples by magnetic polythiophene nanoparticle solid-phase extraction (SPE) coupled with microsampling injection – flame atomic absorption spectrome2
Low-cost 3D-printing system for the deposition of reduced graphene oxide (rGO) thin films by dip-coating with application for electrode fabrication2
Dual-grating waveguide coupler biosensor for the real-time determination of human immunoglobulin M (IgM) antibodies1
Sensitive temperature measurement with composite multicavity Fabry-Perot interferometers (FPIs) and differential phase demodulation1
Pneumatic piston hydrostatic bioreactor for cartilage tissue engineering1
Automated multi-functional system for the characterization of plate valves in reciprocating compressors1
Correction1
Complete thermal characterization of liquids by front photopyroelectric configuration using the reference sample method1
Monitoring of human dynamics by a flexible and comfortable polyvinylidene fluoride (PVDF) sensor1
Alternative magnetic field sensor based on modified yttrium iron garnet (YIG) microspheres and a magnetostrictive material1
Design of a volumetric cylindrical coil-tuned at 298 MHz for 7 T imaging1
State estimation for novel kinetic model oscillatory behavior with a time delay for bioethanol production1
Refractive index (RI) sensing by a D-shaped photonic crystal fiber with a deposited graphene–polymethyl methacrylate (PMMA) platform1
Novel electrochemical biosensor for Escherichia coli using gold-coated tungsten wires and antibody functionalized short multiwalled carbon nanotubes1
Gold nanoparticles (AuNPs) and graphene oxide heterostructures with gold film coupling for an enhanced sensitivity surface plasmon resonance (SPR) fiber sensor1
Analysis of Chinese herbal compound preparations by ballpoint connector supported solvent microextraction and high-performance liquid chromatography with ultraviolet detection1
Novel multi-frame super resolution algorithm for X-ray diffraction (XRD)1
Automated Vickers hardness system with closed-loop control for polishing pads for semiconductor production1
Investigation and characterization of black crusts on limestone at historical buildings in the cities of İstanbul and Edirne (Turkey)1
Identification of fruit using a flexible tactile sensor array1
Rapid classification of coal by laser-induced breakdown spectroscopy (LIBS) with K-nearest neighbor (KNN) chemometrics1
Cardboard packaging minimization: Autonomous box selection by RGB-depth vision system and complementary deep learning classification1
Determination of methane during anaerobic digestion by tunable diode laser absorption spectroscopy (TDLAS)1
Sensitive fluorescent determination of indium (III) by a thiourea–quinoline-based chemosensor1
High sensitivity refractive index sensors with different no-core fiber diameters1
Determination of the antibiotic minocycline by integrated optofluidic microstructured polymer optical fiber chemiluminescence1
High-pressure fluorescence measurements using a diamond anvil cell (DAC)1
Determination of anthocyanins and anthocyanidins in the wild grape (Vitis sylvestris Gmelin) by high-performance liquid chromatography-diode array detection (HPLC-DAD)1
Characterization of a polyvinylidene fluoride (PVDF) nanofiber film coated with carbon nanotubes (CNTs) on a polyimide substrate by integrated experimental measurements and computational analysis1
Experimental study on crack detection performance of multilayer Koch differential pick-up planar fractal eddy current probe1
Comparison of two mechanical disaggregation methods of fresh lung tissues for extraction of high-quality RNA1
In situ characterization of human fingernails by optical front-face fluorescence for the identification of primary hypothyroidism1
Temperature compensation of a hybrid algorithm optimized neural network: Application to a 64-channel electronic pressure scanner1
Temperature and refractive index sensing using a chirped tilted fiber Bragg grating (CTFBG) cascaded with a fiber Bragg grating (FBG)1
Measurement of high-power transient electromagnetic pulse field with integrated photonic electric-field sensor1
0.35217785835266