Journal of Vibration and Control

Papers
(The TQCC of Journal of Vibration and Control is 4. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)
ArticleCitations
Adaptive nonlinear second-order sliding mode synchronization control of direct drive H-type platform with zero error constraint61
Wave-based attitude control of in-orbit spacecraft with large-amplitude slosh39
Analytically measure the vibratory characteristics of the cable-stayed bridge during dual-cantilever erection38
Assistant investigation of energy dissipation in non-obstructive particle damper based on a neural network using simulated annealing backpropagation37
Corrigendum37
Free vibration analysis of laminated cylindrical adhesive joints with conical composite shell adherends36
Finite wing effects on the energy harvesting from stall-induced oscillations34
Event-triggered consensus for delayed second-order leader-following heterogeneous multi-agent systems under input saturated condition26
Unbalanced vibration suppressing for aerostatic spindle using sliding mode control method and piezoelectric ceramics26
On robust stability of second order plus interval time delay plants using Fractional-Order Proportional Integral Derivative controllers25
Active nonlinear vibration control of a buckled beam based on deep reinforcement learning25
Control of the maglev system with a low stiffness elastic track beam by pole assignment and a reduced order state observer24
Linear matrix inequality-based vibration control of three-dimensional Euler–Bernoulli beam with external disturbance23
Design of shock isolator under recoil shock23
Low frequency noise control in duct based on locally resonant membrane with attached resonators22
Transfer learning evaluation based on optimal convolution neural networks architecture for bearing fault diagnosis applications22
Dynamic characteristics of bladder type attenuator for hydraulic systems21
Dynamic analysis and vibration control of a rotor-Active magnetic bearings system with base motion21
Investigation of the free vibrations of bi-directional functionally graded material beams using differential quadrature method21
Parameters optimization of three-element dynamic vibration absorber with inerter and grounded stiffness21
Quality assessment of adhesive joints using third harmonics of fundamental shear horizontal wave mode21
Adaptive variable domain fuzzy PID control strategy based on road excitation for semi-active suspension using CDC shock absorber20
Avoiding stick-slip limit cycle vibration in electric vehicle brake system via brake force distribution20
Efficacy of velocity feedback control for suppression of the friction-induced oscillation due to mode-coupling instability in a two degrees-of-freedom mechanical system20
Improvements to a vehicle’s ride comfort by controlling the vertical component of the driving force based on in-wheel motors20
Design and experiment of a large-scale space micro-vibration simulator19
An optimal sensor/actuator placement method for flexible structures considering spatially varying disturbances19
Global finite-time control for image-based visual servoing of quadrotor using backstepping method18
Coupled modal characteristics of a bladed rotor bearing system under aerodynamic and rotor excitations: Modelling and numerical study18
Experimental study on the physical mechanism of pulse noise in the tail of a recoilless gun18
Synchronous control of tri-motor vibration system considering an adaptive back-stepping control strategy17
Optimization and control of an energy-efficient vibration-driven robot17
Vibro-acoustic characteristics of rectangular plates with any number of point masses and translational springs17
Motion control framework for unmanned wheel-legged hybrid vehicle considering uncertain disturbances based robust model predictive control17
Research on mechanical fault diagnosis method based on federated differential equations17
Free vibrational behavior of a conical sandwich shell with a functionally graded auxetic honeycomb core17
Optimal design of dynamic vibration absorber for elastic vibration control of vehicle carbody in time-varying service environment16
Completely distributed collision-free cooperative control for underactuated unmanned surface vessels with edge weighted interaction16
Fault diagnosis of wind turbine gearboxes based on SVM feature selection and CGAN data augmentation under imbalanced samples16
A new adaptive fuzzy logic control for nonlinear car active suspension systems based on the time-delay16
Dual-cell composite acoustic covering layer with broadband absorption characteristics16
Spatial–temporal masked graph autoencoder for rotating machinery fault diagnosis with limited data16
Research on the fault diagnosis method of drying roller based on VMD-RF16
Analytical, numerical, and experimental methods to study thermo-elastic coupling inherent and vibration characteristics of a flexible rotor system15
Super twisting and hierarchical sliding mode anti-swing control of boom crane15
Using a continuous mathematical model to investigate the effect of a symmetric circumferential crack on the free vibrations of a simply supported Euler–Bernoulli beam15
Research on dynamic response of multi-layer beam system considering random interlayer parameters14
Suppression effect of the leading-edge groove on deep cavity noise at low speeds: Groove length14
Steady-state dynamic analysis of a nonlinear fluidic soft actuator14
Detection of mode frequencies for spherical cavity embedded within a mild steel plate14
Study on the impedance dynamics and control of the active suspensions based on the equilibrium trajectory error14
Receptance coupling substructure analysis based FRF modeling for multi-segment shell with nonlinear joint interface14
Modal properties investigation of a carbon/glass fiber-reinforced polymer composite sandwich structure with lozenge-like core: An experimental and finite element simulation14
Sensorless control of CuAlNi/KAPTON bimorph actuator13
A 3D finite element model updating of spinal lumber segment applying experimental modal data and particle swarm optimization algorithm13
Band gaps and dynamics of locally resonant meta-plate with stiffness adjustable low frequency resonator13
Direct search-based optimal robust observer for polytopic systems using the concept of inverse system13
Hybrid modal-machine learning damage identification approach for beam-like structures13
A blending control for broadband vibration isolation considering zero-infinite stiffness and damping13
Performance evaluation of machine learning algorithms and impact of activation functions in artificial neural network classifier for bearing fault diagnosis13
Power boundaries in resonant electrodynamic wireless power transfer systems12
Influence of rail weld irregularity on dynamic stress of bogie frame based on vehicle-track rigid-flexible coupled model12
Optimal robust constraints-following control for rail vehicle virtual coupling12
A tutorial on a multi-mode identification procedure based on the complex-curve fitting method12
Load noise prediction of a power transformer12
Research on time-delay-dependent H/H2 optimal control of magnetorheological semi-active suspension with response delay12
Radial vibration analysis of single and composite spherical shells by wave approach12
Semi-active fuzzy control of a powerpack with magneto-rheological dampers at full operating conditions12
A hybrid sliding mode controller design for vibration suppression in a hydraulic suspension system with vertical load disturbance12
A relaxed gradient based iterative algorithm of the generalized Sylvester-conjugate matrix equation over centro-symmetric and centro-Hermitian matrices12
Free vibrations of circular and sectorial plates by using the shape functions with trigonometric and hyperbolic terms11
A new multi-modal time series transformation method and multi-scale convolutional attention network for railway wagon bearing fault diagnosis11
Vibration control of an unbalanced system using a quasi-zero stiffness vibration isolator with fluidic actuators and composite material: An experimental study11
Adaptive neural network independent joint-based control for an ODE-PDE rigid-flexible manipulator with multiple constraints11
Event-triggered nonsingular fast terminal sliding mode control for attitude synchronization of multiple spacecraft11
Bearing fault detection under time-varying speed based on empirical wavelet transform, cultural clan-based optimization algorithm, and random forest classifier11
Novel design of rotary pontoon floating wind turbine reliability assessment by self-deconvolution method11
Rotary inverted pendulum control using neuro-adaptive robust generalized dynamic inversion11
H2 and H∞ optimal designs of tuned inerter dampers for base motion excited structures with inherent damping11
Neural network interval observer for nonlinear descriptor systems with the optimized hidden node distribution11
Simulation analysis of the dynamics characteristics of battery electric vehicle transmission system under impact condition11
Performance analysis of natural rubber viscoelastic dampers: A low-cost solution for structural damping11
Fault diagnosis method of wheel diameter difference based on stacked autoencoder and multiple kernel learning11
Active/passive vibration isolation with multi-axis transmission control: Analysis and experiment11
Three-dimensional dynamic modeling and simulation of a multi-cable winding hoister system considering bidirectional coupling between cage and flexible guides11
Prediction and mitigation of train-induced vibrations of over-track buildings on a metro depot: Field measurement and numerical simulation10
Intelligent calibration of wind turbine gearbox dynamic model by integrating LSTM agent model and GA-PSO algorithm10
Observer-based adaptive neural network control design for projective synchronization of uncertain chaotic systems10
Prediction of sound transmission loss of conical acoustic enclosure using statistical energy analysis and its experimental validation10
Mutual interference and its effects on searching efficiency between predator–prey interaction with bifurcation analysis and chaos control10
A three-stage method for efficiently extracting the higher-order harmonics of bearing fault characteristic frequencies10
Experimentally investigating the influence of changing payload stiffness on outer loop iterative learning control strategies with shaking table tests10
Vibration suppression of a cylindrical shell structure by transmission path control10
Suppression of solar array vibration by torque compensation using a magnetorheological actuator: A hardware-in-the-loop test study10
Study on the friction-induced vibration and wire corrugation of metro rigid overhead wire-pantograph systems10
Theoretical optimization and experimental verification of a non-contact damper for high temperature superconducting Maglev systems10
A machine learning-based model for real-time leak pinpointing in buildings using accelerometers10
Robust flight control for a quadrotor under external disturbances based on predefined-time terminal sliding mode manifold10
Two-parameter cooperative intelligent optimal control of chaotic motion for a vibro-impact system with soft constraint10
Control of uncertain non-affine nonlinear systems using neural networks subject to input saturation with unknown control direction10
Enhancing bearing and gear fault diagnosis: A VMD-PSO approach with multisensory signal integration10
Bifurcation and stability analysis of a high-speed rail vehicle with active yaw dampers10
Sound field recovery based on numerical data-driven and equivalent source method10
Updating singular value decomposition for modal analysis of slow-varying non-stationary vibration structures10
A three-dimensional B-spline wavelet finite element method for structural vibration analysis9
A disturbance-compensation-based sliding mode control scheme on mode switching condition for hybrid electric vehicles considering nonlinear backlash and stiffness9
Enhanced method for optimum driving point identification for modal testing9
On the vibration control through mode coupling in a near-uniform chain-like structure using an inerter9
Data-driven tracking consensus for a class of unknown nonlinear multi-agent systems9
Generalized scattering matrix method for Lamb wave scattering analysis at cascaded notches9
Design and verification of diesel generator exhaust muffler9
Double Legendre polynomial quadrature-free method for axisymmetric vibration of functionally graded piezoelectric circular plates9
Modal analysis and dynamic shimmy behavior of vehicle–road system9
Deriving suitable models for model-based control design of a parallel manipulator with flexible components9
Vibration reduction control by a cable actuation system for reflector antenna9
Dynamical behavior of a spinning tapered Rayleigh beam subjected to an axial load9
Event-triggered communication for H synchronization and synchronization of multi-weighted coupled neural networks with and without uncertain parameters9
Active vibration control of inlet piping system with a time-variant secondary path using the mirror modified filtered-x least mean square algorithm9
An approach to solve fractional optimal control problems via fractional-order Boubaker wavelets9
The new shift perturbation method with applications to vibrational problems9
Retraction notice: Application of a V-belt continuously variable transmission system by using a composite recurrent Laguerre orthogonal polynomial neural network control system and modified particle s9
Investigation on the time/frequency domain prediction model of radiation noise based on the source map9
Active sloshing control of a circular cylindrical container with FG GPL-RC9
Multi-scale analysis for dynamic stability of an axially accelerating viscoelastic beam subjected to combination parametric resonance9
Empirical mixed Ramanujan Fourier decomposition and its application to early fault diagnosis of planetary gears8
Optimizing base isolation system parameters using a fuzzy reinforced butterfly optimization: A case study of the 2023 Kahramanmaras earthquake sequence8
Stiffness design and multi-objective optimization of machine tool structure based on biological inspiration8
A novel robust control strategy with adaptive law for angle tracking of a Two-Degree-of-Freedom helicopter8
An improved model predictive control method for path tracking of autonomous vehicle considering longitudinal velocity8
A new predictive intelligent controller and path planning for mobile robots8
A signal compensation-based balance control for the rotary inverted pendulum system8
Additional effects and vibration characteristics of the excited plate buried in particles8
Research on the wave transmission characteristics of a flexible chamber inserted in the fluid-filled elastic pipeline8
Shock absorber friction testing on a MacPherson suspension considering realistic mounting situation8
Vertical vibration analysis of rolling interface based on dynamic rolling force with variable friction characteristics8
Dynamic stability analysis of piezoelectric laminated viscoelastic microbeam in temperature-electric field8
High-precision stable control method for the rotor axis trajectory of flywheel energy storage in maglev trains8
Investigation of the effect of longitudinal creepage on wheel squeal8
On the influence of the elastic characteristics of composite materials on the vibrating properties8
Acoustic mechanism analysis of milling process through workpiece and spindle vibrations8
Energy harvesting from railway slab-tracks with continuous slabs8
Friction-induced vibration reliability and sensitivity analysis of a braking system8
Influence of cork-rubber gasket on the circular propagation of train-induced vibration waves in high-speed railway shield tunnels8
Silencing performance analysis of a membrane cavity with different edge conditions8
Scavenging energy from aeroelastic vibrations for hybrid stall control in a fixed-wing micro aerial vehicle8
Investigation of the effects of frequency veering phenomenon in a pre-twisted and double-tapered rotating Timoshenko beam8
A discrete output feedback 2-SMC using Linear Matrix Inequalities and adaptive switching gain approaches: Real application on a chemical reactor8
Adaptive fixed-time control based on super-twisting disturbance observer for manipulators8
Vibro-acoustic performance of expansion joints of concrete and steel box girders subjected to vehicle excitations8
Numerical simulation of wind environment in Xiamen east sea area8
Enhancing bridge structural health monitoring through the appearance frequency parameter8
Analysis on dynamics performance of the existing wheel–rail high-speed railway raising to 400 km/h operation8
Effect of long-wave deviation of stator plane on high-speed maglev train and guideway system8
Machine learning-based soft-sensor development for road quality classification8
Vibration suppression and coordination control of bilateral teleoperation system for flexible-link manipulator with communication delay8
Subharmonic and superharmonic resonances of five-layered porous functionally graded sandwich cylindrical shells with two-layered viscoelastic cores8
Effectiveness of damping and inertance of two dampers on mitigation of multimode vibrations of stay cables by using the finite difference method8
Correlation transmissibility damage indicator for deterioration performance analysis of hydropower generator unit8
Vibration reduction and dynamic response analysis of urban railway steel-spring floating slabs under periodic track irregularities8
Dynamics modelling and influencing factor analysis of a rocket-launcher coupling system considering uncertain parameters8
Magnetic ring array with high-amplitude negative stiffness for high performance micro-vibration isolation8
The impact of dynamic loading and cyclic temperature variations on the damping efficiency of particle dampers8
Distributed dynamic event-triggered asymptotic tracking control of time-varying nonlinear multi-agent systems8
Structural health evaluation of Phu My cable-stayed bridge using correlation analysis of vibrations at multiple locations8
Re-designing strategy to enable a sub-system to function as a dynamic vibration absorber8
Elastic wave attenuation in a metaplate with periodic hollow shapes for vibration suppression8
The free vibration analysis of a cantilever trapezoidal plate with non-uniform thickness reinforced with non-uniformly distributed nanofillers7
Rotation matrix-based finite-time trajectory tracking control of benthic AUV with communication bandwidth limitation7
Waveform harmonic suppression technology for electromagnetic standard vibration actuators based on current feedback control7
A novel magnetorheological elastomer composite structure for longitudinal vibration control of shaft system7
New criteria for predefined finite time synchronization of memristor-based neural networks7
Optimal vibration control with considering non-probabilistic time-dependent reliability for hypersonic vehicles7
Interval sensitivity analysis of joint dynamics in complex built-up structures7
Machinery fault diagnosis based on a transfer learning model with local sparse structure of PMDCNN-LSTM7
Special issue on ultrasonic guided waves for structural health monitoring7
A phase-field approach for transient thermal stress analysis of cracked and porous S-FGM rotating micro-blade under the combined effect of thermally induced vibrations and various mechanical loads7
Development of a dual-mode inertial shear actuator for active vibration control of gear transmission systems7
Finite frequency H∞ control of discrete linear parameter-varying systems7
Robust fuzzy output feedback control for a magnetorheological semi-active air suspension system with time-delay and actuator saturation7
Constrained H control with gain switching for a nonlinear active suspension system matching non-pneumatic wheel7
Semi-active yaw dampers in locomotive running gear: New control algorithms and verification of their stabilising effect7
Long short-term memory based fault diagnosis of rolling element bearings using vibration signals7
New approach of milling state recognition based on attention mechanism weighted fusion K-nearest neighbor under framework of chaotic attractor using accelerated life signal7
Real time stabilization of a rotary inverted pendulum using neural networks approach7
Adaptive sliding mode attitude control of 2-degrees-of-freedom helicopter system with actuator saturation and disturbances7
Low-order MIMO controller for turbomachinery supported by active magnetic bearings7
Electromechanical modelling and vibration control analysis of cyclic symmetric structures with a piezoelectric vibration absorber7
Adaptive multi-scale graph fusion for fault diagnosis in concurrent variable conditions and unlabeled data7
Dynamic uncertainty propagation analysis framework for nonlinear control problem based on manifold learning and optimal polynomial method and its application on active suspension system7
Numerical investigation on vortex-induced vibration characteristics and vortex shedding mechanism of the triple-box girder7
Stability analysis for Kawahara equation with boundary time-varying delay7
Partial eigenstructure assignment of the vibration system based on multi-input PID active control7
Constraint-following adaptive robust control for multi-vehicle system formation with collision avoidance7
Finite element formulation for free vibration of the functionally graded curved nonlocal nanobeam resting on nonlocal elastic foundation7
Analysis of the vibration of a cracked ferromagnetic rectangular plate in a transverse magnetic field7
Influence of displacement sensor runout on active magnetic bearing-rotor system and control analysis7
Recognition and location of rotor–stator rub-impact failure of aircraft engine with periodicity feature of vibration signals7
Robust H∞ output consensus of heterogeneous nonlinear multi-agent systems with external disturbance and unknown time-delay based on distributed Lyapunov-based MPC7
Blocking effect of double-row periodic pile barriers with honeycomb-pored structure on vibration isolation7
Love wave along the corrugated interface between an elastic half-space and the corrugated porous layer containing two fluids7
Micro/nano vibration suppression of a flexible macro-micro manipulator7
Control of a building system with sudden nonlinearity using the sliding mode technique7
An intelligent fault diagnosis method of hydroelectric generating unit based on enhanced cyclic spectral coherence and DCNN with group normalization7
A novel fractional-order boundary layer fast terminal sliding mode controller for permanent magnet linear synchronous motor7
Study on semi-active damping control strategies to improve dynamic behavior of high-speed trains subject to strong crosswinds7
Effect of control time delay on high-speed maglev vehicle-bridge-wind system7
Fixed-time reinforcement learning and optimal control design7
A study of soft and hard impact effects in single-particle impact dampers7
Correlation of design parameters of lattice structure for highly tunable passive vibration isolator7
Multiple-input multiple-output robust vibration control for constrained gyroelastic solar panel considering parametric and un-modeled dynamic uncertainties6
Demodulated time-direction synchrosqueezing transform and its applications in mechanical fault diagnosis6
Controllability and observability for fractal linear dynamical systems6
Nonlinear vibration model of sandwich beam with a shear thickening fluid core6
Auxetic enhancement of the shunted piezoelectric effect for vibration suppression6
Vibration isolation performance of simply supported beam installed with a negative stiffness device6
An adaptive feature extraction technique for ship-radiated noise based on weighted multiscale mathematical morphological filtering6
Theoretical modeling on the combination resonance of size-dependent microbeams6
An investigation on the modelling of a finite porous liner for the sound propagation in a rectangular duct6
DMVT-based observer design for general affine class of fractional-order nonlinear MIMO systems6
Integrated time-optimal rigid-body and zero-vibration shapers on a two degrees of freedom overhead crane system6
An efficient penalty function method for scenario-based uncertainty quantification problems6
Steady-state and start-up transient responses of a belt-driven starter generator system for micro-hybrid electric vehicles6
Fixed-time observer-free formation tracking control of second-order multi-agent systems with external disturbances and a non-autonomous leader6
Subband reinforced adaptive feedback control algorithm in mechanical vibration control6
Parameters optimum of multiple underframe suspended equipment on high-speed railway vehicle carbody vibration control by using an improved genetic algorithm6
A stability guaranteed nonfragile fault-tolerant control approach for Markov-type vehicle active suspension system subject to faults and disturbances6
Design of metadevices based on isotropic materials for eigenfrequency recovery in lightened structures6
Ride comfort improvement by back propagation-active disturbance rejection control in semi-active hydro-pneumatic suspension of mining dump truck6
Engine noise cancellation with optimum array of speakers inside vehicle enclosures6
Analysis fluid pressure response of hydraulic composite pipe subjected to an axial random vibration6
Dynamics and control of dual-quadrotors slung a slender beam with attitude-pendulum coupling effects6
Research on modified lumped parameter method in torsional vibration analysis of reciprocating compressor shaft6
A fast and efficient mesh stiffness model for spur gears considering thin-walled or oblique web6
Research on follow-up active noise control with phased-array secondary sound source6
Nonlinear vibration control of functionally graded material beam coupled with NiTiNOL–steel wire ropes6
A field experiment on surface wave isolation by partially embedded periodic pile barriers6
The carrier wave design for the synthesis of non-Gaussian and non-stationary signals using the amplitude modulation method6
Acoustic propagation through a duct metamaterial attached with periodic multi-resonant cavities6
Interval dynamic responses analysis of the damaged arch with uncertainties subjected to a moving load6
Contact acoustic nonlinearity and damping properties of completely free vibrating curved and delaminated CFRP plates6
Broadband low-frequency flexural wave attenuation in beam-type metastructures with double-sides inertial amplified resonators6
Covariance tracking method for designing a robust receding horizon controller6
Continuous finite-time sliding mode control for synchronization of perturbed bistable electrostatic and piezoelectric transducers with external disturbances6
Decentralized robust preview control for uncertain continuous-time interconnected systems6
Symplectic superposition method for the free-vibrating problem of sigmoid functionally graded material rectangular thin plates clamped at four edges6
Distributed containment control for unmanned surface vehicles by performance adjustable event-triggered strategy5
In memoriam5
A spatial six-dimensional force measurement method based on acceleration sensors5
Proportional-derivative control and motion stability analysis of a 16-pole legs rotor-active magnetic bearings system5
Fixed time dynamic compensation based prescribed performance formation control of heterogeneous UAV-USV systems5
0.058192014694214