Journal of Manufacturing Science and Engineering-Transactions of the A

Article	Citations
Material Behavior of Magnetoresponsive Polymer Composites in Extrusion-Based Direct Writing	62
Effects of Chitosan Addition on Mechanical, Surface, and Antibacterial Properties of Three-Dimensional-Printed Photopolymers	53
Adaptive Process Planning for Additive/Subtractive Hybrid Manufacturing of Overhang Features	43
Acoustic Levitation-Assisted Contactless Printing of Microdroplets for Biomedical Applications	41
Empirical Analyses of Weld Zones to Understand Material Flow and Defect Formation During Friction Stir Welding	40
Reviewer’s Recognition	37
Hybrid Analytical-Numerical Modeling of Surface Geometry Evolution and Deposition Integrity in a Multi-Track Laser-Directed Energy Deposition Process	36
An Investigation Into the Grinding Characteristics and Wear Evolution of Micro-Elastic Composite Grinding Pads	35
Deposition Volume Compensation for Enhanced Shape Fidelity in Nested Printing	35
Freeform Bending Tool Design for Rectangular Profiles and Its Influence on the Process	35
Mathematical Modeling of Material Removal and Surface Roughness in Ultrasonic-Assisted Magnetic Abrasive Flow Machining Process	28
Radius of Contact During Friction Surfacing of Stainless Steel 304L: Effect of Spindle Speed and Rod Diameter	26
Analysis of the Heat-Affected Zone and Ablation Efficiency in Terms of Burst Mode Parameters During High Power Picosecond Laser Micromachining of Metals	26
Sequential Modeling and Knowledge Source Integration for Identifying the Structure of a Bayesian Network for Multistage Process Monitoring and Diagnosis	26
Digital Twinning and Optimization of Manufacturing Process Flows	24
Multimodal Data-Driven Robot Control for Human–Robot Collaborative Assembly	23
One-Dimensional Plasma Model of Electrical Discharge Machining in Deionized Water for Prediction of Plasma Characteristics Along the Interelectrode Gap	22
Additive Manufacturing of Tough Silicone Via Large-Scale, High-Viscosity Vat Photopolymerization	21
A Radiation-Based Analytical Model for the Computation of Temperature in the Arc Column of Submerged Arc Additive Manufacturing Process	21
A Novel Analytical Explicit Method to Calculate Formed Wheel and Tooth Flank of Involute Gears in Profile Grinding Process	21
Process Capability Indices With Student Mixture Models Applied to Aircraft Engines GD&T	21
Modeling and Simulation Study of Dry Ultrasonic Vibration-Assisted Grinding of Tool Steel With Single Alumina Abrasive Grit	21
Process-Structure-Property Relationships of Laser Powder Bed Fusion Lattice Structures	20
In Situ Monitoring and Recognition of Printing Quality in Electrohydrodynamic Inkjet Printing via Machine Learning	20
Analytical Study and Experimental Verification of Shear-Thinning Ink Flow in Direct Ink Writing Process	19

Coaxial Nozzle-Assisted Embedded 3D Printing of Single-Layered Channels Within a Yield-Stress Matrix Bath	19
Characterization and Analysis of the Thermal Conductivity of AlSi10Mg Fabricated by Laser Powder Bed Fusion	19
Architecture-Driven Physics-Informed Deep Learning for Temperature Prediction in Laser Powder Bed Fusion Additive Manufacturing With Limited Data	19
A Study on Converging-Diverging Nozzle Design for Supersonic Spraying of Liquid Droplets Toward Nanocoating Applications	19
Dual-Metric Neural Network With Attention Guidance for Surface Defect Few-Shot Detection in Smart Manufacturing	18
Fatigue Modeling for Laser-Fused Metal Components With Small Data: From Scattering to Reliability	18
Self-Supported Printing of Gelatin Composite-Based Engineered Living Materials	18
Rib Folding Defect Prediction of Spin-Extrusion Forming Processing of Thin-Walled Cylindrical Rings With External Cross Ribs	18
Surface Integrity Analysis in Grinding of Dual-Phase High-Entropy Alloy	18
Influence of Wire Feed Speed and Torch Speed on the Mechanical Properties of Wire Arc Additively Manufactured Stainless Steel	16
Improving Uniformity of Cell Distribution in Post-Inkjet-Based Bioprinting	16
A Review of State-of-the-Art on Enabling Additive Manufacturing Processes for Precision Medicine	16
Virtual Dynamics Model for Five-Axis Machining of Thin-Walled Blades	16
Calibration of Cellular Automaton Model for Microstructure Prediction in Additive Manufacturing Using Dissimilarity Score	16
Reviewer's Recognition	15
Evaluation of Contrived Wear Methodology in End Milling of Inconel 718	15
Review of Experimental and Computational Investigations into Laser Impact Welding	15
Effect of Elongation of a Rod on Strain Inhomogeneity and Shape Change During the Compression-Type Forming Process	15
Extracting Skeletons of Two-Manifold Triangular Mesh Surface for Planning Skeleton-Guided Five-Axis Surface Inspection Path	15
Numerical Simulation of Ultrasonic Spot Welding of Superelastic NiTi Alloys: Temperature Distribution and Deformation Behavior	14
An Explicit Coupling Model for Accurate Prediction of Force-Induced Deflection in Thin-Walled Workpiece Milling	14
Surface Characterization of Three-Dimensional Printed Fiber-Reinforced Polymer Following an In-Process Mechanical–Chemical Finishing Method	14
Turn-Taking Prediction for Human–Robot Collaborative Assembly Considering Human Uncertainty	14
Repurposing Supply Chains and Process Planning Across Products Using a Similarity Model Based on Supernetworks	14
A Physics-Based Model-Data-Driven Method for Spindle Health Diagnosis—Part III: Model Training and Fault Detection	14
Recent Advances on Cryogenic Assistance in Drilling Operation: A Critical Review	14
Evaluation of Phase Transformation Strain and Its Influence on Residual Stress Generation in Laser Welded Ti–6Al–4V Alloy	14
Multicultural Diversity Workforce and Global Technology Collaboration Empowered Semiconductor Manufacturing Excellence in Taiwan: A Manufacturing Engineer’s Perspective	13
Reduction of Pressure Distribution Variation in Press Mold Based on Variable Lattice Optimization	13
Effect of Machining-Induced Deformation and Grain Refinement on Microstructure Evolution in Hybrid Wire-Arc Directed Energy Deposition	13
Surface Modification of LPBF Ti6Al4V Through In Situ Nitrogen-Assisted Laser Surface Remelting	13
Directed Energy Deposition With Coaxial Wire-Powder Feeding: Melt Pool Temperature and Microstructure	13
Physics-Informed Machine Learning for Failure Mode Proportion Prediction in Composite Adhesive Joints	13
In Situ Investigation of the Tool–Particle Interaction During Orthogonal Cutting of SiCp/Al Composite	13
Design for Manufacturing of Cemented Carbide Coated Components Toward High Wear and Impact Resistance Performance	13
Non-Gaussian Multivariate Process Capability Based on the Copulas Method: An Application to Aircraft Engine Fan Blades	13
Distribution of Residual Stress in Wire-Arc Additively Manufactured Small-Scale Component: Single- Versus Multi-Level Heat Input	12
Thickness Control of Autoclave-Molded Composite Laminates	12
A Novel Heat-Assisted Three-Roll Incremental Rolling System for Flexible Rolling	12
AUDIT: Functional Qualification in Additive Manufacturing Via Physical and Digital Twins	12
Adaptive Knowledge-Informed Error Compensation for Process Planning in Extrusion-Based Additive Manufacturing	12
Sacrificial Powder Pressure Control for Infiltration of Microscale Binder Jet Printed Metal Parts	11
Co-Optimization of Supply Chain Reconfiguration and Assembly Process Planning for Factory-in-a-Box Manufacturing	11
Sensor-Based Planning and Control for Conformal Deposition on a Deformable Surface Using an Articulated Industrial Robot	11
Effect of Horizontal Vibrations and Particle Size on the Packing Density of Multi-Sized Sphere Mixtures: Discrete Element Method Simulation	11
An Alternative Approach to Compute Chip Thickness in Milling	11
Machining Process Automation in Computer Numerical Control Turning Using Robot-Assisted Imaging and CNN-Based Machine Learning	11
Adaptive Mobile Robot Scheduling in Multiproduct Flexible Manufacturing Systems Using Reinforcement Learning	11
Robotic Testbeds for Emulation of In-Space Assembly and Manufacturing of Advanced Structural Systems	11
Multiphase Flow Field Analysis and Experimental Study of Pulsating Air Jet Polishing	11

A Novel Physics-Based Model for Predicting Melt Pool Dimensions in Laser Powder Bed Fusion Process	11
Detection of Part Porosity in Additive Manufacturing Using Machining	11
Effects of Laser-Powder Alignment on Clad Dimension and Melt Pool Temperature in Directed Energy Deposition	10
Integrated Energy Optimization in Manufacturing Through Multiagent Deep Reinforcement Learning: Holistic Control of Manufacturing, Microgrid Systems, and Battery Storage	10
Physics-Guided Long Short-Term Memory Networks for Emission Prediction in Laser Powder Bed Fusion	10
A Comprehensive Model to Compute Roll Gap Profile for a Rolling Mill Including Bearing and Mill Housing Deflections	10
Application of Magnetic Fields to Weld Overlay Cladding to Improve Its Performance in the Oil and Gas Industry	10
Three-Dimensional Printing of Highly Conducting PEDOT: PSS-Based Polymers	10
Material Removal Behavior of Ultrasonic Vibration Helical Grinding of SiCf/SiC Composites	10
Editorial	10
Cyber Physical Production Systems for Deep Drawing	10
Manufacturing Multi-Matrix Composites: Out-of-Vacuum Bag Consolidation	10
Adaptive Robot Motion Planning for Smart Manufacturing Based on Digital Twin and Bayesian Optimization-Enhanced Reinforcement Learning	10
Bast Fiber Decortication for Biocomposites by a Mastication Process	10
Thermophysical Investigations of Mango Seed Oil as a Novel Cutting Fluid: A Sustainable Approach Toward Waste to Value Addition	9
Effect of Microgravity on the Metal Droplet Transfer and Bead Characteristics in the Directed Energy Deposition-Arc Process	9
Effects of Process Parameters on Forming Forces and Surface Quality in Micro-Single-Point Incremental Forming	9
Chatter Stability of Orthogonal Turn-Milling Process in Frequency and Discrete-Time Domains	9
Environmental and Economic Benefits of Harvesting Machine for Magnet-to-Magnet Recycling	9
Suppression Mechanism and Prediction Model of Top Burr in Metal Milling Under Ice Boundary Constraint	9
Improving Structural Integrity of Direct Laser-Deposited Ni–Co–Cr–Al–Y Superalloys by Alloy Modification	9
Toward Swarm Manufacturing: Architecting a Cooperative 3D Printing System	9
Capturing Local Temperature Evolution During Additive Manufacturing Through Fourier Neural Operators	9
New Left-Handed Milling Cutter and Process for Burrs-Free Machining of Precision Copper Electrode	9
Numerical Study of Temperature Evolution During Friction Element Welding	9
Optical Metrology of Critical Dimensions in Large-Area Nanostructure Arrays With Complex Patterns	9
Pose Optimization in Robotic Milling Based on Surface Location Error	9
Hybrid Laser-Arc Welding-Induced Distortion Analysis of Large-Scale Thin-Walled Cruise Ship Structures	8
Resilient Circularity in Manufacturing: Synergies Between Circular Economy and Reconfigurable Manufacturing	8
Special Issue: Human–Robot Collaboration for Futuristic Human-Centric Smart Manufacturing	8
Rapid Commissioning of Large Machine Tools Using Finite Element-Based Correction of Geometric Errors	8
Automated Subtractive Timber Manufacturing—Joinery Machines Versus Industrial Robots	8
Gravitational Effects on Optical Lens Fabrication: First Insides on Earth- and Microgravity Experiments	8
Fatigue Scattering Analytics and Prediction of SS 316L Fabricated by Laser Powder Bed Fusion	8
Shape Optimization of Flat Clinching Tools by Combining Finite Element Simulation and Response Surface Method	8
Sintering Mechanisms in Metal Extrusion-Based Sintering-Assisted Additive Manufacturing: State-of-the-Art and Perspectives	8
Evolution of Microstructure in MLX®19 Maraging Steel During Rotary Friction Welding and Finite Element Modeling of the Process	8
Wafer Edge Metrology and Inspection Technique Using Curved-Edge Diffractive Fringe Pattern Analysis	8
Strategic Production Process Design With Additive Manufacturing in a Make-to-Stock Environment	8
Effect of Laser Forming on the Fatigue Behavior of Metal Foams	8
Measurement of Thermal Field Temperature Distribution Inside Reaction Chamber for Epitaxial Growth of Silicon Carbide Layer	8
Simulating the Evolution of Non-Metallic Inclusions During the Forging Process	8
Effects of Build Angle on Additively Manufactured Aluminum Alloy Surface Roughness and Wettability	8
Computational Method to Predict Three-Dimensional Chatter Vibration in Cold Rolling of Flat Metals	8
Why Parallelism of Workpieces Becomes Convergent During Double-Sided Lapping?	8
Embedded Fused Filament Fabrication of Thermoplastics for Biomedical Applications	8
In-Situ Monitoring and Its Correlation to Mechanical Properties in Additively Manufactured 718 Ni Alloy	7
A Two-Stage Focal Transformer for Human–Robot Collaboration-Based Surface Defect Inspection	7
Superhydrophobic Property and Corrosion Resistance of 1100 Aluminum Alloy With Peano Fractal Micro-Nano Textures	7
Development of Mathematical Model and Characterization of Internal Surface Obtained by Elasto-Abrasives Magneto-Spiral Finishing (EAMSF)	7
Electrochemical Characterization of Dopamine in Neural Cells With Flexible Biosensors	7
Designing of a Field Shaper for Electromagnetic Crimping of Multi-Tube-Tube and Multi-Tube-Rod in Single Discharge Energy	7
Phase-Field Modeling and Simulation of High-Strength Porous Polymer Fabrication Via Immiscible Polymer Blending for Bone Implants	7
Dynamic Cutting Force Estimation via Fourier Neural Operator With Inferred Machine Tool Dynamics: A Proof of Concept	7
A Comprehensive Experimental Investigation of Hydraulically Supported Robot-Assisted Incremental Sheet Forming of Al6061 Sheets	7
Real-Time Multi-Modal Human–Robot Collaboration Using Gestures and Speech	6
Indirect Tool Condition Monitoring Using Ensemble Machine Learning Techniques	6
Effect of Interlayer Machining Interventions on the Geometric and Mechanical Properties of Wire Arc Directed Energy Deposition Parts	6
Manufacturing Process and System Sustainability Analysis Tool: A Proof-of-Concept for Teaching Sustainable Product Design and Manufacturing Engineering	6
A Theoretical and Experimental Study on High-Efficiency and Ultra-Low Damage Machining of Diamond	6
Mist Flow in Through-Tool Minimum Quantity Lubrication Drilling: Two-Phase Flow Simulation and Experimental Observation	6
Effect of LPBF Process Parameters on Thermomechanical Properties of a Copper-Based Metal Matrix Composite	6
Special Issue: State-of-the-Art in European Manufacturing Research	6
A Numerical Model of Microstructure Formation Considering Nanoparticle Distribution During Selective Laser Melting Process	6
Tool Path Planning Method for Parametric Surfaces Based on the Piecewise Coons Stream Function Reconstruction on Hierarchical T-Meshes	6
Characterization of Ultrasonically Assisted Orthogonal Cutting of Bone Using Digital Image Correlation Analysis	6
Editorial	6
Effect of Welding Mode on Remote Laser Stitch Welding of Zinc-Coated Steel With Different Sheet Thickness Combinations	6
Experimental and Numerical Investigations on Fabrication of Surface Microstructures Using Mask Electrolyte Jet Machining and Duckbill Nozzle	6
Compensation of Thermally Induced Errors in Five-Axis Computer Numerical Control Machining Centers Equipped With Different Spindles	6
Hyperspectral Analysis of Silicon Nanowires Manufactured Through Metal-Assisted Chemical Etching	6
Investigation on the Printability of Recycled Thermoplastic Polyurethane/Carbon Nanotube Nanocomposites	6
Exploring the Effects of Perceived Complexity Criteria on Performance Measures of Human–Robot Collaborative Assembly	6
Identification of Tool Life Stages and Redressing Criterion for Polycrystalline Diamond Micro-Grinding Tools Using a Machine Learning Approach	6
Efficient Voxel-Based Workpiece Update and Cutter-Workpiece Engagement Determination in Multi-Axis Milling	6
A Simple Approach to Transient-State Modeling of Nitrogen Cooling in the Extrusion of Light-Alloy Complex Profiles	6
Understanding Residual Stress Evolution in Directed Energy Deposition With Interlayer Deformation	6
A Study of the Efficacy of Flame Electrical Resistance for Standoff Measurements During the Oxyfuel Cutting Process	6
Mechanical Profile of Smooth Cellular Materials	6
A Simplified Estimation of Spindle Dynamic Compliance From Current Measurement for Contactless Electromagnetic Excitation	6

Operational Modal Analysis of Self-Excited Vibrations in Milling Considering Periodic Dynamics	5
An Artificial Intelligence Application for In-Process Springback Control of Sheet Metal Bending	5
A Comparative Study of Self-Piercing Riveting and Friction Self-Piercing Riveting of Cast Aluminum Alloy Al–Si7Mg	5
A Review of Through-Silicon Via Inspection and Metrology Technology for Advanced Semiconductor Packaging	5
Effect of Pressurization and Annealing on Hole Expansion	5
Chatter Avoidance by Spindle Speed and Orientation Planning in Five-Axis Ball-End Milling of Thin-Walled Blades	5
Exploratory Factor Analysis for Machining Error Data of Compressor Blades Based on Dimensionality-Reduced Statistical Analysis Method	5
Three-Dimensional Profile Reconstruction and Internal Defect Detection of Silicon Wafers Using Cascaded Fiber Optic Fabry–Pérot Interferometer and Leaky Field Detection Technologies	5
Comparative Analysis of Shape Defects Induced by the Micro-Machining of Glassy Polymers	5
Bendability Assessment of Double-Walled Tubes With Additively Manufactured Core Structure	5
Experimental Setup for In-Process Measurements and Analysis of Wear-Dependent Surface Topographies	5
A Preform Design Approach for Uniform Strain Distribution in Forging Processes Based on Convolutional Neural Network	5
A Vision-Based Human Digital Twin Modeling Approach for Adaptive Human–Robot Collaboration	5
A Novel Diagnostic Tool for Human-Centric Quality Monitoring in Human–Robot Collaboration Manufacturing	5
Investigation of Fiber Orientation of Fused Filament Fabricated CFRP Composites via an External Magnetic Field	5
Knowledge Discovery in Engineering Applications Using Machine Learning Techniques	5
100th Anniversary Issue of the Manufacturing Engineering Division Paper A Review of Advances in Modeling of Conventional Machining Processes: From Merchant to the Present	5
A Combined Approach of Melt Pool Ultrasonic Vibration and Interpass Laser Remelting for Achieving Superior Mechanical Properties by Controlling Microstructure and Phases in L-DED of Inconel 625	5
An Additive Manufacturing Testbed to Evaluate Machine Learning-Based Autonomous Manufacturing	5
Hierarchical Porous Structure Fabrication Via Hybrid Stereolithography and Inkjet Printing With Sacrificial Liquid	5
Rotordynamics of an Improved Face-Grinding Spindle: Rotational Stiffness of Thrust Bearing Increases Radial Stiffness of Spindle	5
Honoring Emeritus Professor Lawrence Yao	5
Generalized SmartScan: An Intelligent LPBF Scan Sequence Optimization Approach for Reduced Residual Stress and Distortion in Three-Dimensional Part Geometries	5
Special Issue: Manufacturing Science Engineering Conference 2022	5
Data Augmentation-Based Manufacturing Quality Prediction Approach in Human Cyber-Physical Systems	5
Effect of Feeding Strategy on the Microstructure and Microhardness in Friction Stir-Based Additive Manufacturing of Aluminum Alloy Powder	5
Review of the Causes of Wire Breakage and Its Mitigation During the Wire Electric Discharge Machining Process	5
Identification of the Constitutive and Friction Models Parameters via a Multi-Objective Surrogate-Assisted Algorithm for the Modeling of Machining—Application to Arbitrary Lagrangian Eulerian Orthogon	5
Effect of Microstructure on the Machinability of Natural Fiber Reinforced Plastic Composites: A Novel Explainable Machine Learning (XML) Approach	5
Characterizing Shunting Effects on Nugget Quality and Joint Strength in Sequential Spot Welds for Automotive Applications	5
Characterization of Resistance-Welded Hybrid Sandwich Sheets With Additively Manufactured Core Structure	5
A Novel Asymmetric Face Gear Cut by Duplex Face-Milling With Multiple Auxiliary Flank Modification Motions	5
Experimental Investigation and Modeling of the Kerf Profile in Submerged Milling by Macro Abrasive Waterjet	5
Warm Air Bending of AZ31B Sheets Based on an Online Local Contact Heating Method	4
Spatially-Informed Online Prediction of Milling Surface Deformation Using Multiphysics-Infused Graph Neural Network for Digital Twinning	4
A Voxel-Based End Milling Simulation Method to Analyze the Elastic Deformation of a Workpiece	4
Three-Dimensional Printed Diffraction Gratings Drop Coated by Different Resins and Their Mechanism	4
High-Fidelity Sensing Modality for Anomaly Detection in Inkjet Printing	4
Fabrication Time Diagrams for In-Space Manufacturing of Large Reticulated Structures	4
Integrating Decision Trees and Clustering for Efficient Optimization of Bioink Rheology and 3D Bioprinted Construct Microenvironments	4
Effect of Layer Addition on Residual Stresses of Wire Arc Additive Manufactured Stainless Steel Specimens	4
High-Volume Production of Repeatable High Enhancement SERS Substrates Using Solid-State Superionic Stamping	4
Printing Hollow Tubes Using Digital Glass Forming	4
Strategies for Controlling Metallurgical Transformations and Mechanical Properties in Al/Steel Friction Welding: A Review	4
Automated Evaluation and Rating of Product Repairability Using Artificial Intelligence-Based Approaches	4
Effect of Laser Shock Peening on Electrochemistry and Wettability of Additively Manufactured Stainless Steel	4
Adaptive Online Continual Learning for In-Situ Quality Prediction in Manufacturing Processes	4
Flower Pollination Algorithm With Ring Topology for Multisolution Spaces to Solve the Disassembly Line Balancing Problem	4
Posture Optimization in Robotic Flat-End Milling Based on Sequential Quadratic Programming	4
Theoretical and Experimental Investigation of Material Removal Rate in Magnetorheological Shear Thickening Polishing of Ti–6Al–4V Alloy	4
Effects of Aluminum Plate Initial Residual Stress on Machined-Part Distortion	4
A High-Consolidation Electron Beam-Curing Process for Manufacturing Three-Dimensional Advanced Thermoset Composites	4
Layer-Wise Emission Prediction for Laser Powder Bed Fusion With an Attribution-Based Explainable Deep Learning Model	4
Run-Time Cutting Force Estimation Based on Learned Nonlinear Frequency Response Function	4
Multiclass Reinforced Active Learning for Droplet Pinch-Off Behaviors Identification in Inkjet Printing	4
MVGCN: Multi-View Graph Convolutional Neural Network for Surface Defect Identification Using Three-Dimensional Point Cloud	4
Mechanical, Wear, and Corrosion Properties Investigation of ZE41/TiB2 Surface Composites Fabricated by Friction Stir Processing	4
Multi-Agent Reinforcement Learning Method for Disassembly Sequential Task Optimization Based on Human–Robot Collaborative Disassembly in Electric Vehicle Battery Recycling	4
Concept of Error Compensation for Nonorthogonality in Two-Axis Displacement Measurement System Utilizing Single Grating Scale and Littrow Configuration	4
Wire-Arc Directed Energy Deposition of Aluminum Alloy 7075 With Dispersed Nanoparticles	4
Simulation-Guided, Application-Specific Manufacturing of Gecko-Inspired Adhesives	4
Nanoengineered Laser Shock Processing Via Pulse Shaping for Nanostructuring in Metals: Multiscale Simulations and Experiments	4
Editorial	4
Modeling Variation in Multi-Station Compliant Assembly Using Parametric Space Envelope	4
In Situ Analysis of the Effect of Ultrasonic Cavitation on Electrochemical Polishing of Additively Manufactured Metal Surfaces	4
Optimal Process Planning for Hybrid Additive and Subtractive Manufacturing	4
A Review of Constitutive Models and Thermal Properties for Nickel-Based Superalloys Across Machining-Specific Regimes	4
Towards Multilayered Coatings of 304L Stainless Steels Using Friction Surfacing	4
A Physics-Based Model-Data-Driven Method for Spindle Health Diagnosis, Part I: Modeling of Geometric Faults	4
Development of a Novel Welding Technique With Reduced Heat-Input by Employing Double-Pulsed Gas Metal Arc Welding for Aerospace Grade 18% Ni Maraging Steel	3
A Crystal Plasticity-Based Model for Orthogonal Machining Mechanics of Single-Crystal Materials	3
Metal Transfer Characteristics of Aluminum Alloy Variable Polarity High-Frequency Pulsed Gas Metal Arc Welding	3
Material Removal Rate of Face-Milled Bevel Gears Based on a Ring-Dexel Cutting Simulation	3
Impact of Defects on Interfacial Bonding in Multilayer Friction Surfacing Deposited Metal Additive Structure	3
Cryo-Assisted Extrusion 3D Printing of Shape Memory Polymer-Graphene Composites	3
Resonant Acoustic Vibration-Assisted Cathode Stripping for Efficient Recycling of Spent Li-Ion Batteries	3
Influence of Tool Thread Pitch During Friction Stir Welding of High-Density Polyethylene Plate	3
Modeling and Experimental Validation of CFRP–Metal Joints Utilizing 3D Additively Manufactured Anchors	3
Optical Methods for In Situ Monitoring of Powder Feed Stock in Blown Powder Directed Energy Deposition	3
Determining the Parameters of Gurson–Tvergaard–Needleman Model for Predicting the Failure of Wrought and Fused Filament Fabricated 17-4 PH Stainless Steel	3
Enhancing Production in Robot-Enabled Manufacturing Systems: A Dynamic Model and Moving Horizon Control Strategy for Mobile Robot Assignment	3
Cryogenic Failure Behaviors of Al–Mg–Si Alloy Tubes in Bulging Process	3
An Improved Iterative Predictive Model for Grinding Residual Stress Considering Material Microstructure Evolution	3
Predictive Thermal Modeling and Characterization of Ultrasonic Consolidation Process for Thermoplastic Composites	3
A Spatio-Temporal Prediction and Planning Framework for Proactive Human–Robot Collaboration	3
The Effect of Laser Shock Peening on Back Stress of Additively Manufactured Stainless Steel Parts	3
Activity Recognition With Machine Learning in Manual Grinding	3
Joint Special Section: Advances in Design and Manufacturing for Sustainability	3
Design De-Identification of Thermal History for Collaborative Process-Defect Modeling of Directed Energy Deposition Processes	3
Bubble Behavior and Its Effect on Surface Integrity in Laser-Induced Plasma Micro-Machining Silicon Wafer	3
Multi-Pass Laser Polishing of As-Built Directed Energy Deposition Surfaces	3
Implementation of Precision Machine Tool Thermal Error Compensation in Edge-Cloud-Fog Computing Architecture	3
Detection of Traceability Features Embedded in Metal Additive Manufacturing Components by Phased Array Ultrasonic Testing	3
Retired Lithium-Ion Battery Pack Disassembly Line Balancing Based on Precedence Graph Using a Hybrid Genetic-Firework Algorithm for Remanufacturing	3
Understanding the Effects of Process Conditions on Thermal–Defect Relationship: A Transfer Machine Learning Approach	3