Petroleum Science and Technology

Article	Citations
Intelligent prediction of fracture parameters in ultra-deep carbonate rocks based on knowledge and data dual drive	53
Electromagnetic analysis of mud pulse generator based on magnetorheological fluid	27
Enhancing the production of liquid hydrocarbons by coupling blast furnace gas (BFG) of steelwork with syngas in the GTL process	23
A novel method for quantitative analysis of brine and oil saturation in a sealed low permeable core based on one-dimensional (1D) NMR technique	23
Integrated approach to improve numerical and geostatistical performance on a naturally fractured carbonate reservoir	23
Synthesis of high strength agar and its water plugging application in enhanced oil recovery	21
Study on microscopic production characteristics of crude oil in tight reservoirs displaced by CO 2 -assisted fracturing fluid	21
Calculating the water production rate in a low-saturation reservoir based on the modified curved capillary theory	20
A two-factor correlation for predicting friction factor in dispersed oil-water flow with drag-reducing polymers	20
The injection method of a hydrophobic associated polymer with evident salt thickening property	19
Reducing the risk of gas leaks into the ocean floor induced by offshore production well failure	19
Estimating unconfined compressive strength and Young’s modulus of carbonate rocks from petrophysical properties	18
Lithofacies and electrofacies models for Mishrif Formation in West Qurna oilfield, Southern Iraq by deterministic and stochastic methods (comparison and analyzing)	18
Investigate on mechanism of nanofluid drainage gas recovery in tight gas reservoir	18
Experimental study on the influence of fractured-vuggy porous media on condensate gas depletion production	18
Characterization and analysis of influencing factors for perforation cluster efficiency in deep shale gas fracturing	17
Investigation of the formation characteristics of methane hydrate in frozen porous media	17
Prediction of mud weight window based on strain energy method	16
Algorithm for estimating SARA fraction properties and its application in predicting the densities of heavy oils, bitumen and diluted bitumen with solvents	15
Dispersion of asphaltene aggregates by zwitterionic surfactants: influence of cations structure	15
Experimental study and implementation of supervised machine learning algorithm to predict the flowability of two-phase water-oil in pipeline	15
Effect of ionic liquids in the dispersion of a Mexican heavy crude oil	15
Simulation of wellbore temperature and pressure field in supercritical carbon dioxide fracturing	14
Thermodynamic modeling of adsorption of dimethyl sulfide on raw and modified activated carbon by simplified local density model	14
Experimental and modeling investigation of using drag reducing agents as the wax depositions inhibitor in a simulated scaled pipeline	14

Research on the prediction model of wax deposition thickness of waxy crude oil in pipeline transportation	14
Bacterial diversity of heavy crude oil based mud samples near Omani oil wells	13
Formation damage reduction during CO 2 flooding in low permeability carbonate reservoir with using a new synthesized nanocomposites	13
Failure analysis using finite element method of defective pipelines reinforced with composite repair system	13
Effect of natural Frankincense extract on clay swelling inhibition in water-based drilling fluids	13
Preparation and performance of an environmental-friendly degradable semi-interpenetrating network temporary plugging agent for acidification	13
The injection pattern investigation of hydrocarbon gas enhanced oil recovery in heterogeneous reservoirs	12
Predictive modeling of drilling rate index using machine learning approaches: LSTM, simple RNN, and RFA	12
Fracture energy evolution and fractal characteristics of shales with different quartz contents	12
Study on multi-cluster fracture propagation and quantitative evaluation method considering perforation erosion	12
Preparation of a modified nano calcium silicate hydrate and study on its low-temperature early strength properties	12
A coupled CFD-DEM numerical study of proppant transport in hydraulic fracture and natural fracture	12
Application of the high-resolution layer-stripping constrained seismic inversion method in thin reservoirs: a case study of Triassic reservoir prediction in Lunnan, Tarim Basin, NW China	12
Implementation of Xanthan gum–polyacrylamide blend, surfactant, and alkali assembly for enhanced oil recovery: a rheological and phase behavior analyses approach	12
Comb-type polymeric additives as flow improvers for crude oil with high asphaltene and wax contents	11
An analytical model to estimate the oxidation time required to reach spontaneous ignition with heat loss being considered	10
Comparative study on the use of three types of clay stabilizers in acidification	10
Performance, combustion and emissions characteristics of lanthanum zirconate coated DI engine fueled with nannochloropsis algae bio-diesel containing tin oxide nanoparticles	10
Demulsifying compositions for destruction of water coal tar emulsions	10
Characteristics of fluid potential and the division of hydrocarbon migration and accumulation units in the Nangong Sag, Bohai Bay Basin, China	10
Evaluation of aging of chemical additives under controlled conditions of pressure, flow rate and temperature	10
Ionic liquids as demulsifies for crude oil. Synthesis, characterization, and evaluation	9
Anisotropy of pore throats in shales with different lithologies and its coupling relationship with diagenesis and hydrocarbon generation	9
Extractive oxidative desulfurization of fuels using choline chloride and tetraethylene glycol-based eutectic solvent	9
Assessing biodiesel feedstocks and production techniques: a comprehensive review	9
Logging evaluation of total organic carbon and analysis of influencing factors in source rock of Zhu III sub-basin, Pearl river mouth basin, China	9
Smart phase behavior modeling of asphaltene precipitation using advanced computational frameworks: ENN, GMDH, and MPMR	9
A novel model of kinetics and thermodynamics for shale gas adsorption–diffusion	9
Selection of heavy oil upgrading technologies by proper estimation of petroleum prices	9
On the stability of shale: the role of zeta potential (ζ) and Debye Hückel length (κ−1) on shale swelling	9
Effect of a novel type of water-in-oil nanocomposite viscosity improver on rheological properties of crude oil	9
Hybrid analysis for excessive water production problem	9
Application of BP neural network to prediction of recovery effect of air-foam flooding in heavy oil	9
Enrichment characteristics of organic matter in faulted lake basin reflected by major and trace elements	8
Seismic modeling of complex hydrocarbon traps in shot domain and data processing to obtain stack-migration sections	8
Code communication method for water injection wells based on transient flow waves in tubular strings	8
Reservoir characterization of the Oligocene–Miocene siliciclastic sequences (Ghar Member of the Asmari Formation) in the northwestern Persian Gulf	8
Study on multi-fracture propagation based on the uniform coefficient of fracture propagation	8
Modeling the impact of pH and reservoir temperature on the dissolution of quartz mineral due to oilfield chemical treatment	8
Residual strength and critical state of strain softening–hardening considering thermal effect for brittle rocks	8
Fast search for toxic gas leakage on offshore platforms based on deep learning methods	8
Research on the calculation method of halite grade from logging data - A case study from the lower member of Shashi Formation in Jiangling Depression	8
Reconstructing seismic data using the accelerated linearized Bregman method and iterative soft thresholding algorithm	8
Integration of seismic and well log data for evaluating the upper cretaceous reservoirs of Horus oil field, Alamein Basin, Northern Western Desert, Egypt	8
Laboratory-scale designs of downhole conditions: a review of standalone sand screen wear analysis	8
Spectral induced polarization measurements to detect different scales in oil and gas production tubing	8
Research on the PDC rock cuttings image instance segmentation method based on improved U-Net++ network and multi-feature fusion	8
Study on the sweep control method of in-situ combustion reservoir in Xinjiang Hongqian oilfield based on asynchronous injection and production	8
Assessing the conveyance of fluidized natural gas hydrate in a horizontal tubing	8
Experimental study of wellbore strengthening on pressure-bearing capacity	8

Empirical modeling of naphthenic acids precipitation in an idealized system using response surface methodology: impact of factor interactions	8
Study on the hydraulic condition of absorption tower of CGH unit for increasing the desulfurization capacity; simulation and execution results	8
A comprehensive review of advances in nanoparticle catalysts for biodiesel production	8
Influence of residual agent content on stability of produced fluid in profile control	8
The characteristics and implications of acidizing in clayey silt-type hydrate deposits	8
Improving the performance of bentonite-free water-based mud with lignin-based biopolymer	7
Analyzing the impact of adding aluminum oxide and cerium oxide nanoparticles to waste cooking biodiesel on engine performance, combustion and emissions characteristics	7
Optimized deep learning model assisted pressure transient analysis for automatic reservoir characterization	7
Numerical analysis of phase transition of mining cavity in hydrate solid fluidization exploitation coupled multi-field	7
CBM reservoir thickness prediction using the seismic nonlinear stochastic inversion method	7
Optimization research regarding the jet nozzle combination mode for marine hydrate solid fluidized mining tools based on dual nozzles	7
Investigation of the effects of carbon dioxide injection on the rock and fluid intraction in high permeable sandstone reserviors	7
Prediction of spark ignition engine performance with bioethanol-gasoline mixes using a multilayer perception model	7
Thermo-kinetic analysis and microstructural characterization of fractured-carbonate rock exposed to high temperature	7
In situ stress and reservoir quality evaluation of Jurassic Ahe Formation in Kuqa depression of Tarim Basin, China	7
Life prediction model of fracturing sliding sleeve based on Sichuan shale gas in China	7
Novel insights on polymer properties: their effects on polymer flooding performance in thin heavy oil reservoirs	7
Research on optimizing the drilling rate for through-tubing drilling and sand pumping tools	7
Analysis of diesel engine performance using blends of tamarind biodiesel and nanoparticle mixtures	7
Characterization of nano based drilling fluid for shale swelling inhibition	7
A review on applications of nanoparticles in the enhanced oil recovery in carbonate reservoirs	7
Compositional nature and geochemical implications of acidic and neutral NSO compounds in oils from the Baiyun Sag, Pearl River Mouth Basin, China	7
Reusable light hydrocarbon-stabilizer system applied to heavy oil viscosity reduction	7
Crude oil differential enrichment in sandy-debris-flow and turbidite-current sandstones by physical simulation experiment	7
Quantitative evolution of pores in tight sandstone reservoirs: a case study of late Triassic Chang 6 member, Western Ordos Basin, China	7
Production and characterization of microsphere reinforced polyester composite: Modeling of thermal decomposition with ANN and optimization studies by RSM	7
Simulation study on effect of drill pipe eccentricity on cuttings transportation in wellbores based on kinetic theory of granular flow	7
A novel approach to optimize random forest with comprehensive reservoir analysis for EOR screening	6
Study on the preparation of magnetic Janus nanofluids and oil displacement mechanism	6
Analysis on the physical and electrical characteristics for weathered and oxidized zones of coal seams	6
Biodegradation of paraffin wax using Bacillus sp. SASH for quality improvement of crude oil properties	6
A mini-review of the application of surfactants in crude oil pipeline transportation	6
Alleviation of liquid sulfur blockage by altering sulfur wettability in sour gas reservoirs	6
Data-driven model-based rate decline prediction in unconventional eagle ford shale oil wells	6
Study on spatial distribution of coalbed methane contents in coal seams based on key interpolation points: an example from Shizhuang South block in, Shanxi Province, China	6
Analysis of seepage mechanism and productivity model of multi-stage fractured horizontal well in tight sandstone gas reservoir	6
The effect of a surfactant and dispersant mixed Cr 2 O 3 nanoparticles on the analysis of stability and physicochemical properties	6
Simulation on adjustment ability of adjustable water nozzle in separate-layer water injection	6
Asphaltenes of crude oils and bitumens: The similarities and differences	6
Biomass ashes as a new additive for eco-friendly drilling fluids: chemical characterization and evaluation of rheological and filtration properties	6
Study on dynamic transport characteristics of cuttings during drilling and washing of long horizontal wells	6
Machine learning model for constant volume depletion prediction of the Niger Delta condensate systems	6
Numerical simulation study of coal seam dual-porosity medium fluid-solid coupling model and directional long borehole gas drainage	6
Techno-economical optimization of water-alternating-CO 2 /dimethyl ether process for enhanced oil recovery	6
The effect of water vapor on the phase behaviors during depletion and CO 2 injection in gas condensate reservoir	6
The impact of spatiotemporal variation of composite conductivity in carbonate reservoirs on well production after fracturing	6
Performance and optimization of biological and chemical composite flooding system for enhanced oil recovery	6
Study on the properties of oil-water interface after the interaction between ionized water and naphthenic acid	6
Efficient use of oil in water macroemulsions as enhanced oil recovery agents	6
Integrated numerical simulation of CO2 flooding、heat recovery and storage in high temperature reservoir	6
Kinetic analysis of oxidation characteristics in synthetic motor oil	6
Effect of water cut on the performance of an asphaltene inhibitor package: experimental and modeling analysis	6
Maximizing oil production efficiency in mature field: a strategic approach to optimizing recovery and extending field life	6
Oxidative desulfurization using nanocomposites of heterogeneous phosphotungstic acid over natural zeolites; optimization by central-composite design	6
Time-dependent reliability analysis of wellbore stability during drilling in hydrate exploitation	6
Physicochemical properties of high-content rubber modified bio-asphalt using molecular simulation	5
Decrease in evaporative loss of volatile fuels using new mixture of surfactants	5
Comprehensive analysis of membrane efficiency of shale: descriptive statistics & laboratory data analysis	5
Hydroxy gas enriched diesel fuel investigations on homogenous charge compression ignition engine with change in injector opening pressure	5
Rejuvenate the aged asphalt with functional oil emulsion	5
Integrated multiscale characterization of tight sandstone reservoirs in the Taiyuan Formation, Q area, Ordos Basin: implications for diagenetic-structural coupling and reservoir evaluation	5
Development of an RSM-based predictive model for evaluation of corrosion efficiency of ATMP in one molar HCl for carbon steel samples	5
Analysis of the influence of water cut and clearance in pump efficiency for a well equipped with sucker rod pumping	5
Inter-layer interference in commingled tight gas reservoirs: experiments and simulations	5
Ultrasonic-assisted dewatering of crude oil under various transient flow regimes: an experimental and simulation study	5
Research on the inversion of coal reservoir physical property parameters and water flow characteristics based on tracer concentration model	5
Analysis of influencing factors of wellbore pressure imbalance based on BP-DEMATEL-ISM model	5
Improved prediction of heavy oil viscosity at various conditions utilizing various supervised machine learning regression	5
Potential formation mechanism and prediction of crude oil price based on underdetermined independent component analysis	5
Seismic survey of steeply inclined coal seams using the vertical data acquisition system	5
Effects of water flooding speed on oil recovery efficiency and residual oil distribution in heterogeneous reservoirs	5
Adjacent well casing damage caused by fluid pressure intrusion in multistage fracturing	5
An inversion model of dynamic inter-well connectivity by using flow splitting method in processing heterogeneity of multilayer reservoirs	5
Study on increasing polymer gel strength with Janus nanoparticles and its feasibility in profile control and water plugging	5
Study on core modeling of carbonate rocks and dynamic characteristics of water invasion based on volume of fluid method	5
Applying a deep-learning surrogate model to simulate and compare achievable oil recovery by different waterflood scenarios	5
Biodegradation of crude oil by a moderately haloalkaliphilic Acinetobacter strain	5
A novel experimental study on inhibition of asphaltene deposition	5
Construction and characteristic analysis of in-situ combustion production dynamic evaluation equation based on seepage difference of zones	5
Transformation of asphaltenes of vacuum residues in thermal and thermocatalytic processes	5

A new oilfield injection water quality decision-making method	5
Design and application of an alkaline–surfactant–polymer (ASP) slug for enhanced oil recovery: a case study for a depleted oil field reservoir	5
Investigation on immiscible N 2 WAG and SWAG after water flooding in the paleo-subterranean river of fractured-vuggy reservoirs	5
Prediction for corrosion rate of production tubing for CO2 injection of production well	5
Experimental study on vertical light hydrocarbon microseepage mechanisms	4
Petrological evaluation of changes occurring in organic matter sourced from Patala-Chichali sequence, Upper Indus Basin	4
Wellhead optimization of the demulsification of water-in-oil emulsion using response surface methodology	4
Study on injection-production linkage fire flooding technology for heavy oil reservoir in thick oil layer	4
Regeneration of waste rolling oil via poly diallyl dimethyl ammonium chlorid	4
Investigation of the effects of salinity on the amount of asphaltene formed from emulsions Water–Oil	4
Effective parameters of Mo recovery from spent homogeneous nanocatalyst in slurry phase hydroconversion processes	4
Investigation of thermophysical properties of synthesized SA and nano-alumina reinforced polyester composites	4
Source of organic matter and paleoenvironment of deposition of crude oils from the Niger Delta Basin	4
A review on fundamental principles of a natural gas hydrate formation prediction	4
Organic geochemical studies and origin of black hydrocarbon material (heavy oil) produced from Risha gas field (Jordon): insights into produced contaminated organic-inorganic materials during producti	4
Experimental study on the effects of 1-butyl-3-methylimidazole ferric tetrachloride on shale properties and gas desorption	4
Investigation on friction pressure of oil storage and brine discharge in underground salt caverns	4
Preliminary experimental study of low salinity effect on organic polar compounds desorption in Hassi Messaoud field-Algeria	4
Simulation research on erosion of downhole tools with groove structure during hydraulic fracturing	4
Fault structure control of gas-water production differences from coalbed methane cluster wells in complex tectonic zones: a case study of the Dahebian block in Liupanshui coalfield, Western Guizhou, C	4
The characteristics of petroleum seepage in coal seams: a case study of Ordos Basin	4
Sub-dew point claus process for reducing hydrogen sulfide emission from sulfur recovery units	4
Simulation of proppant conductivity test: effect of particle size dispersion	4
An overview of organic geochemical indices to evaluate conventional petroleum source rocks: a summary of examples from the Indian Subcontinent	4
Water alternating gas (WAG) recovery process evaluation through simulation for a giant middle-eastern carbonate reservoir	4
A novel method for estimating gas and liquid saturation according to the change of temperature field	4
An insight into wax/asphaltene deposition behavior in the wellbore regions of gas condensate reservoirs	4
Influence of ethyl proxitol on cold filter plugging point, combustion, emissions characteristics of biodiesel blends in CI engines	4
Potential effective criteria for selection of polymer in enhanced oil recovery	4
Exploring the efficacy of various surfactants on the kerosene fuel and its electrical conductivity responses	4
Numerical simulation of vertical-lateral competitive propagation of multiple fractures in multi-layered formations	4
Chemical and mechanical model to analysis wellbore stability	4
High-performance polymers based on PEG and PAMAM dendrimer to inhibit clay swelling in water	4
Numerical study on decomposition characteristics of natural gas hydrate based on molecular dynamics method	4
Breakthrough pressure and in-source/near-source migration of shale oil in saline lacustrine hybrid source rock systems - A case study of the West Qaidam Depression, Qaidam Basin, China	4
Experimental investigation of wax inhibition tendency of Jatropha oil in Niger Delta waxy crude-oil	4
Stability and structural changes of asphaltenes upon the etherification of heavy oil	4
Estimating the minimum miscibility pressure (MMP) of methane-live oil using the slim tube test, by modified oil recovery factor (MORF) and break-over pressure (MBOP) criteria	4
Organic geochemical characteristics and sedimentary environment of source rocks in Northern and Southern Linhe Depression, Hetao Basin	4
Microbial characteristics and potential mechanisms of souring control for a hypersaline oil reservoir	4
Fracture prediction and application in carbonate reservoirs based on the rescaled range analysis- finite difference numerical analysis methods	4
Strength and fatigue analysis of mudline wellhead and its tie-back system in offshore drilling	4
Utilization of nano clay in the formulation of water based completion fluid for hydrocarbon containing reservoirs	4
Process simulation and performance evaluation of plugging cakes during temporary plugging and diverting fracturing	4
Hydraulic, acid, and proppant-carrying acid fracturing stimulation of volcanic reservoirs in Sichuan Basin, China: an experimental study	4
Influence of macroscopic natural fractures group on fractures network propagation in deep shale gas reservoir	4
One practical CaCl2-weighted fracturing fluid for high-temperature and high-pressure reservoir	4
Study on structure control and pour point depression mechanism of comb-type copolymers	4
Synthesis and characterization of Fe 3 O 4 @Al 2 O 3 -1- (2-	4
Environmental impact of waste plastic pyrolysis oil on insulated piston diesel engine with methoxyethyl acetate additive	4
Missing log synthesis based on stacking ensemble learning with invariable features	4
Functions and performance of sensors for slope monitoring in opencast coal mines – laboratory experimentation	4
Ethoxylated lauryl alcohol mixture applied as drilling fluid for filter cake removal: experimental design and formulation optimization	4
Methanol, ethanol and propanol droplets evaporation characteristics with a dilute concentrations of hematite and magnetite nanoparticles	4
Research on eccentric wear and rock breaking mechanism of non-spherical single cone bit	4
Study on hydrodynamic dual acoustic wax prevention based on arbitrary Lagrangian-Eulerian fluid-solid coupling methods	4
Feasibility of adding N-Butanol and di isopropyl ether with gasoline on its physico-chemical properties	4
Effects of ultrasonic waves on water imbibition into oil-wet carbonate reservoirs (a case study)	3
Recent advances in ASP flooding and the implementation of nanoparticles to enhance oil recovery: a short review	3
Productivity model for fractured horizontal wells in tight gas reservoirs considering secondary fractures and water-blocking damage	3
Evaluation of Nong’an oil shale reservoir stimulation based on nitrogen injection	3
Investigation on the water-coning control by CO2 injection in strong bottom water reservoir	3
Investigation of petroleum products dehydration using natural zeolite and activated carbon	3
A prediction technology for fractured reservoirs and its application	3
1-D basin modeling, 3-D reservoir mapping and source rock generative potential of Balkassar oilfield, Potwar basin, Pakistan	3
Mechanism and synergic effect of smart water and amphoteric surfactant on oil recovery in carbonate rocks: Marangoni flow and changing disjoining pressure of water film	3
Depositional environments and sequence stratigraphy of the Arab Formation, Persian Gulf, Offshore Iran	3
Influence of stress on the maximum shut-in pressure of double casing under non-uniform stress	3
Gas content prediction model of water-sensitive shale based on gas–water miscible competitive adsorption	3
A coupled model for predicting thermophysical properties of saturated steam in dual-tubing SAGD horizontal wells with toe-point injection technique	3
Upgrading of crude oil desalting unit of Baiji oil refinery	3
Geochemical characteristics of coal measure source rocks of Upper Carboniferous Benxi Formation in Daning-Jixian area, eastern margin of Ordos Basin	3
Effect of different biomass on properties of slurry fuel based on petroleum coke and municipal sludge	3
Microbial community diversity and potential bioremediation of drill cuttings in two oil reservoirs	3
Well logging restoration based on spatial-temporal information mining from muti-scale correlation graph representation	3
Inhibition of calcium carbonate scale under severe conditions	3
Optimization of hydrogen gas production from flare gas using a genetic algorithm	3
Simulation of oil flow in a heat traced piping segment – COMSOL versus analytical trends	3
Effect of underflow diameter on the separation performance of natural gas hydrate desanding and purification under back pressure	3
Effects of effluent pressure on the thermal cracking of crude oil: insights from thermal simulation experiments and phase analysis	3
Back propagation neural network model for controlling artificial rocks petrophysical properties during manufacturing process	3
Well production interference ratio in tight sandstone gas reservoir and its inspiration to well pattern optimization: a case study of Sulige gas field, NW China	3
Determination of drilling mud weight using deep learning techniques	3
Experimental study on invasion law of oil rim in condensate gas reservoir with bottom water and oil rim	3
A novel method for prediction of refractive index of ionic liquids and alcohol binary systems	3
An investigation of factors affecting Low Tension Gas process for enhanced oil recovery in carbonate reservoirs	3
Sedimentary characteristics of deep-lacustrine fans: a case study on the lower Jurassic Sangonghe formation of the Turpan Basin, NW China	3
Experimental analysis of the effect of zinc oxide nano additive diesel-ethanol blend on the performance and emission characteristics of a variable compression ratio diesel engine at various compressio	3
Numerical study on the transient pressure response of the vug in carbonate reservoirs	3
Application of Geostatistical Inversion Technology in Nanpu Oilfield: taking 1-5 area in the Dongyi section of Nanpu Depression as an example	3
A review of mechanisms influencing stable rheology complex Pickering foams for carbon utilization & storage in subsurface formations	3
Investigation of parameters toward development of an empirical model for the pyrolysis of black oil-shale	3
Efficient AI-Physics hybrid model with productive capabilities to reduce the time of history matching and scenario assessment; a case study: Minagish oil field	3
Numerical simulation of depressurization production of natural gas hydrate in different well types	3
Effect of n-butanol on cotton seed oil biodiesel: an approach for improving the emission behavior of DI diesel engine	3