Petroleum Science and Technology

Article	Citations
Intelligent prediction of fracture parameters in ultra-deep carbonate rocks based on knowledge and data dual drive	54
A novel method for quantitative analysis of brine and oil saturation in a sealed low permeable core based on one-dimensional (1D) NMR technique	27
Study on microscopic production characteristics of crude oil in tight reservoirs displaced by CO 2 -assisted fracturing fluid	23
Integrated approach to improve numerical and geostatistical performance on a naturally fractured carbonate reservoir	23
Enhancing the production of liquid hydrocarbons by coupling blast furnace gas (BFG) of steelwork with syngas in the GTL process	23
A two-factor correlation for predicting friction factor in dispersed oil-water flow with drag-reducing polymers	22
Calculating the water production rate in a low-saturation reservoir based on the modified curved capillary theory	21
Estimating unconfined compressive strength and Young’s modulus of carbonate rocks from petrophysical properties	20
The injection method of a hydrophobic associated polymer with evident salt thickening property	20
Lithofacies and electrofacies models for Mishrif Formation in West Qurna oilfield, Southern Iraq by deterministic and stochastic methods (comparison and analyzing)	20
Reducing the risk of gas leaks into the ocean floor induced by offshore production well failure	20
Investigate on mechanism of nanofluid drainage gas recovery in tight gas reservoir	19
Experimental study on the influence of fractured-vuggy porous media on condensate gas depletion production	19
Prediction of mud weight window based on strain energy method	18
Characterization and analysis of influencing factors for perforation cluster efficiency in deep shale gas fracturing	18
Investigation of the formation characteristics of methane hydrate in frozen porous media	18
Application of the high-resolution layer-stripping constrained seismic inversion method in thin reservoirs: a case study of Triassic reservoir prediction in Lunnan, Tarim Basin, NW China	17
A coupled CFD-DEM numerical study of proppant transport in hydraulic fracture and natural fracture	17
Electromagnetic analysis of mud pulse generator based on magnetorheological fluid	16
Dispersion of asphaltene aggregates by zwitterionic surfactants: influence of cations structure	15
Effect of ionic liquids in the dispersion of a Mexican heavy crude oil	15
Thermodynamic modeling of adsorption of dimethyl sulfide on raw and modified activated carbon by simplified local density model	14
Algorithm for estimating SARA fraction properties and its application in predicting the densities of heavy oils, bitumen and diluted bitumen with solvents	14
Research on the prediction model of wax deposition thickness of waxy crude oil in pipeline transportation	14
Experimental study and implementation of supervised machine learning algorithm to predict the flowability of two-phase water-oil in pipeline	14

Experimental and modeling investigation of using drag reducing agents as the wax depositions inhibitor in a simulated scaled pipeline	14
Effect of natural Frankincense extract on clay swelling inhibition in water-based drilling fluids	13
Failure analysis using finite element method of defective pipelines reinforced with composite repair system	13
Bacterial diversity of heavy crude oil based mud samples near Omani oil wells	13
The injection pattern investigation of hydrocarbon gas enhanced oil recovery in heterogeneous reservoirs	13
Implementation of Xanthan gum–polyacrylamide blend, surfactant, and alkali assembly for enhanced oil recovery: a rheological and phase behavior analyses approach	12
Predictive modeling of drilling rate index using machine learning approaches: LSTM, simple RNN, and RFA	12
Formation damage reduction during CO 2 flooding in low permeability carbonate reservoir with using a new synthesized nanocomposites	12
Fracture energy evolution and fractal characteristics of shales with different quartz contents	12
Study on multi-cluster fracture propagation and quantitative evaluation method considering perforation erosion	12
Synthesis of high strength agar and its water plugging application in enhanced oil recovery	12
Preparation of a modified nano calcium silicate hydrate and study on its low-temperature early strength properties	12
Simulation of wellbore temperature and pressure field in supercritical carbon dioxide fracturing	12
Preparation and performance of an environmental-friendly degradable semi-interpenetrating network temporary plugging agent for acidification	12
Comb-type polymeric additives as flow improvers for crude oil with high asphaltene and wax contents	11
Evaluation of aging of chemical additives under controlled conditions of pressure, flow rate and temperature	10
Characteristics of fluid potential and the division of hydrocarbon migration and accumulation units in the Nangong Sag, Bohai Bay Basin, China	10
Effect of a novel type of water-in-oil nanocomposite viscosity improver on rheological properties of crude oil	10
Performance, combustion and emissions characteristics of lanthanum zirconate coated DI engine fueled with nannochloropsis algae bio-diesel containing tin oxide nanoparticles	10
Comparative study on the use of three types of clay stabilizers in acidification	10
Anisotropy of pore throats in shales with different lithologies and its coupling relationship with diagenesis and hydrocarbon generation	10
Demulsifying compositions for destruction of water coal tar emulsions	10
An analytical model to estimate the oxidation time required to reach spontaneous ignition with heat loss being considered	10
Logging evaluation of total organic carbon and analysis of influencing factors in source rock of Zhu III sub-basin, Pearl river mouth basin, China	10
Ionic liquids as demulsifies for crude oil. Synthesis, characterization, and evaluation	10
Smart phase behavior modeling of asphaltene precipitation using advanced computational frameworks: ENN, GMDH, and MPMR	9
Extractive oxidative desulfurization of fuels using choline chloride and tetraethylene glycol-based eutectic solvent	9
A comprehensive review of advances in nanoparticle catalysts for biodiesel production	9
Study on the hydraulic condition of absorption tower of CGH unit for increasing the desulfurization capacity; simulation and execution results	9
On the stability of shale: the role of zeta potential (ζ) and Debye Hückel length (κ−1) on shale swelling	9
Application of BP neural network to prediction of recovery effect of air-foam flooding in heavy oil	9
Hybrid analysis for excessive water production problem	9
Assessing biodiesel feedstocks and production techniques: a comprehensive review	9
A novel model of kinetics and thermodynamics for shale gas adsorption–diffusion	9
Selection of heavy oil upgrading technologies by proper estimation of petroleum prices	9
Study on multi-fracture propagation based on the uniform coefficient of fracture propagation	9
Laboratory-scale designs of downhole conditions: a review of standalone sand screen wear analysis	9
Code communication method for water injection wells based on transient flow waves in tubular strings	8
Reconstructing seismic data using the accelerated linearized Bregman method and iterative soft thresholding algorithm	8
Fast search for toxic gas leakage on offshore platforms based on deep learning methods	8
Analysis of diesel engine performance using blends of tamarind biodiesel and nanoparticle mixtures	8
Simulation study on effect of drill pipe eccentricity on cuttings transportation in wellbores based on kinetic theory of granular flow	8
Prediction of spark ignition engine performance with bioethanol-gasoline mixes using a multilayer perception model	8
Research on the calculation method of halite grade from logging data - A case study from the lower member of Shashi Formation in Jiangling Depression	8
Assessing the conveyance of fluidized natural gas hydrate in a horizontal tubing	8
Spectral induced polarization measurements to detect different scales in oil and gas production tubing	8
Study on the sweep control method of in-situ combustion reservoir in Xinjiang Hongqian oilfield based on asynchronous injection and production	8
Reservoir characterization of the Oligocene–Miocene siliciclastic sequences (Ghar Member of the Asmari Formation) in the northwestern Persian Gulf	8
Experimental study of wellbore strengthening on pressure-bearing capacity	8
Investigation of the effects of carbon dioxide injection on the rock and fluid intraction in high permeable sandstone reserviors	8

A review on applications of nanoparticles in the enhanced oil recovery in carbonate reservoirs	8
Empirical modeling of naphthenic acids precipitation in an idealized system using response surface methodology: impact of factor interactions	8
Research on the PDC rock cuttings image instance segmentation method based on improved U-Net++ network and multi-feature fusion	8
The characteristics and implications of acidizing in clayey silt-type hydrate deposits	8
Enrichment characteristics of organic matter in faulted lake basin reflected by major and trace elements	8
Seismic modeling of complex hydrocarbon traps in shot domain and data processing to obtain stack-migration sections	8
Improving the performance of bentonite-free water-based mud with lignin-based biopolymer	8
Residual strength and critical state of strain softening–hardening considering thermal effect for brittle rocks	8
Biodegradation of paraffin wax using Bacillus sp. SASH for quality improvement of crude oil properties	7
Production and characterization of microsphere reinforced polyester composite: Modeling of thermal decomposition with ANN and optimization studies by RSM	7
Novel insights on polymer properties: their effects on polymer flooding performance in thin heavy oil reservoirs	7
Quantitative evolution of pores in tight sandstone reservoirs: a case study of late Triassic Chang 6 member, Western Ordos Basin, China	7
Modeling the impact of pH and reservoir temperature on the dissolution of quartz mineral due to oilfield chemical treatment	7
Quantitative evaluation of additive interactions on corrosion inhibitor performance during oilfield acidizing operations: experimental insights	7
Influence of residual agent content on stability of produced fluid in profile control	7
Numerical analysis of phase transition of mining cavity in hydrate solid fluidization exploitation coupled multi-field	7
Asphaltenes of crude oils and bitumens: The similarities and differences	7
A mini-review of the application of surfactants in crude oil pipeline transportation	7
Research on optimizing the drilling rate for through-tubing drilling and sand pumping tools	7
Thermo-kinetic analysis and microstructural characterization of fractured-carbonate rock exposed to high temperature	7
Compositional nature and geochemical implications of acidic and neutral NSO compounds in oils from the Baiyun Sag, Pearl River Mouth Basin, China	7
Integration of seismic and well log data for evaluating the upper cretaceous reservoirs of Horus oil field, Alamein Basin, Northern Western Desert, Egypt	7
Characterization of nano based drilling fluid for shale swelling inhibition	7
In situ stress and reservoir quality evaluation of Jurassic Ahe Formation in Kuqa depression of Tarim Basin, China	7
Reusable light hydrocarbon-stabilizer system applied to heavy oil viscosity reduction	7
Efficient use of oil in water macroemulsions as enhanced oil recovery agents	7
Analysis on the physical and electrical characteristics for weathered and oxidized zones of coal seams	7
A novel approach to optimize random forest with comprehensive reservoir analysis for EOR screening	7
CBM reservoir thickness prediction using the seismic nonlinear stochastic inversion method	7
Life prediction model of fracturing sliding sleeve based on Sichuan shale gas in China	7
Optimization research regarding the jet nozzle combination mode for marine hydrate solid fluidized mining tools based on dual nozzles	7
Optimized deep learning model assisted pressure transient analysis for automatic reservoir characterization	7
Crude oil differential enrichment in sandy-debris-flow and turbidite-current sandstones by physical simulation experiment	7
Analyzing the impact of adding aluminum oxide and cerium oxide nanoparticles to waste cooking biodiesel on engine performance, combustion and emissions characteristics	7
Integrated numerical simulation of CO2 flooding、heat recovery and storage in high temperature reservoir	7
Analysis of seepage mechanism and productivity model of multi-stage fractured horizontal well in tight sandstone gas reservoir	6
Oxidative desulfurization using nanocomposites of heterogeneous phosphotungstic acid over natural zeolites; optimization by central-composite design	6
Study on dynamic transport characteristics of cuttings during drilling and washing of long horizontal wells	6
Numerical simulation study of coal seam dual-porosity medium fluid-solid coupling model and directional long borehole gas drainage	6
Effect of water cut on the performance of an asphaltene inhibitor package: experimental and modeling analysis	6
Kinetic analysis of oxidation characteristics in synthetic motor oil	6
The effect of a surfactant and dispersant mixed Cr 2 O 3 nanoparticles on the analysis of stability and physicochemical properties	6
The effect of water vapor on the phase behaviors during depletion and CO 2 injection in gas condensate reservoir	6
Study on the preparation of magnetic Janus nanofluids and oil displacement mechanism	6
Hydroxy gas enriched diesel fuel investigations on homogenous charge compression ignition engine with change in injector opening pressure	6
Rejuvenate the aged asphalt with functional oil emulsion	6
Machine learning model for constant volume depletion prediction of the Niger Delta condensate systems	6
Maximizing oil production efficiency in mature field: a strategic approach to optimizing recovery and extending field life	6
The impact of spatiotemporal variation of composite conductivity in carbonate reservoirs on well production after fracturing	6
Recent advances in environmentally friendly scale inhibitors: a mini review	6
Simulation on adjustment ability of adjustable water nozzle in separate-layer water injection	6
Alleviation of liquid sulfur blockage by altering sulfur wettability in sour gas reservoirs	6
Techno-economical optimization of water-alternating-CO 2 /dimethyl ether process for enhanced oil recovery	6
Study on spatial distribution of coalbed methane contents in coal seams based on key interpolation points: an example from Shizhuang South block in, Shanxi Province, China	6
A novel experimental study on inhibition of asphaltene deposition	6
Time-dependent reliability analysis of wellbore stability during drilling in hydrate exploitation	6
Study on the properties of oil-water interface after the interaction between ionized water and naphthenic acid	6
Biomass ashes as a new additive for eco-friendly drilling fluids: chemical characterization and evaluation of rheological and filtration properties	6
Performance and optimization of biological and chemical composite flooding system for enhanced oil recovery	6
Improved prediction of heavy oil viscosity at various conditions utilizing various supervised machine learning regression	5
Study on core modeling of carbonate rocks and dynamic characteristics of water invasion based on volume of fluid method	5
Effects of water flooding speed on oil recovery efficiency and residual oil distribution in heterogeneous reservoirs	5
Integrated multiscale characterization of tight sandstone reservoirs in the Taiyuan Formation, Q area, Ordos Basin: implications for diagenetic-structural coupling and reservoir evaluation	5
A new oilfield injection water quality decision-making method	5
Influence of ethyl proxitol on cold filter plugging point, combustion, emissions characteristics of biodiesel blends in CI engines	5
Analysis of the influence of water cut and clearance in pump efficiency for a well equipped with sucker rod pumping	5
Analysis of influencing factors of wellbore pressure imbalance based on BP-DEMATEL-ISM model	5
Decrease in evaporative loss of volatile fuels using new mixture of surfactants	5
Comprehensive analysis of membrane efficiency of shale: descriptive statistics & laboratory data analysis	5
Seismic survey of steeply inclined coal seams using the vertical data acquisition system	5
Inter-layer interference in commingled tight gas reservoirs: experiments and simulations	5
Water alternating gas (WAG) recovery process evaluation through simulation for a giant middle-eastern carbonate reservoir	5
Study on increasing polymer gel strength with Janus nanoparticles and its feasibility in profile control and water plugging	5
An inversion model of dynamic inter-well connectivity by using flow splitting method in processing heterogeneity of multilayer reservoirs	5
Ultrasonic-assisted dewatering of crude oil under various transient flow regimes: an experimental and simulation study	5
Construction and characteristic analysis of in-situ combustion production dynamic evaluation equation based on seepage difference of zones	5
Physicochemical properties of high-content rubber modified bio-asphalt using molecular simulation	5
Biodegradation of crude oil by a moderately haloalkaliphilic Acinetobacter strain	5
Data-driven model-based rate decline prediction in unconventional eagle ford shale oil wells	5
Potential formation mechanism and prediction of crude oil price based on underdetermined independent component analysis	5

Transformation of asphaltenes of vacuum residues in thermal and thermocatalytic processes	5
Hydraulic, acid, and proppant-carrying acid fracturing stimulation of volcanic reservoirs in Sichuan Basin, China: an experimental study	5
Prediction for corrosion rate of production tubing for CO2 injection of production well	5
Design and application of an alkaline–surfactant–polymer (ASP) slug for enhanced oil recovery: a case study for a depleted oil field reservoir	5
Investigation on immiscible N 2 WAG and SWAG after water flooding in the paleo-subterranean river of fractured-vuggy reservoirs	5
Applying a deep-learning surrogate model to simulate and compare achievable oil recovery by different waterflood scenarios	5
Research on the inversion of coal reservoir physical property parameters and water flow characteristics based on tracer concentration model	5
Feasibility of adding N-Butanol and di isopropyl ether with gasoline on its physico-chemical properties	4
Study on structure control and pour point depression mechanism of comb-type copolymers	4
Microbial characteristics and potential mechanisms of souring control for a hypersaline oil reservoir	4
Experimental investigation of wax inhibition tendency of Jatropha oil in Niger Delta waxy crude-oil	4
Process simulation and performance evaluation of plugging cakes during temporary plugging and diverting fracturing	4
Study on injection-production linkage fire flooding technology for heavy oil reservoir in thick oil layer	4
Chemical and mechanical model to analysis wellbore stability	4
Utilization of nano clay in the formulation of water based completion fluid for hydrocarbon containing reservoirs	4
Stability and structural changes of asphaltenes upon the etherification of heavy oil	4
Investigation of the effects of salinity on the amount of asphaltene formed from emulsions Water–Oil	4
Missing log synthesis based on stacking ensemble learning with invariable features	4
Development of an RSM-based predictive model for evaluation of corrosion efficiency of ATMP in one molar HCl for carbon steel samples	4
Synthesis and characterization of Fe 3 O 4 @Al 2 O 3 -1- (2-	4
Potential effective criteria for selection of polymer in enhanced oil recovery	4
Experimental study on the effects of 1-butyl-3-methylimidazole ferric tetrachloride on shale properties and gas desorption	4
Methanol, ethanol and propanol droplets evaporation characteristics with a dilute concentrations of hematite and magnetite nanoparticles	4
The effect of fusel oil as a reductant over the multi-metallic catalyst for selective catalytic reduction of NOx in diesel exhaust at low-temperature conditions	4
Influence of macroscopic natural fractures group on fractures network propagation in deep shale gas reservoir	4
Numerical simulation of natural gas flow characteristics and hydrate formation risk in deepwater submarine pipelines	4
Sub-dew point claus process for reducing hydrogen sulfide emission from sulfur recovery units	4
Experimental study on vertical light hydrocarbon microseepage mechanisms	4
Petrological evaluation of changes occurring in organic matter sourced from Patala-Chichali sequence, Upper Indus Basin	4
Preliminary experimental study of low salinity effect on organic polar compounds desorption in Hassi Messaoud field-Algeria	4
Numerical study on decomposition characteristics of natural gas hydrate based on molecular dynamics method	4
Research on eccentric wear and rock breaking mechanism of non-spherical single cone bit	4
Wellhead optimization of the demulsification of water-in-oil emulsion using response surface methodology	4
A novel method for estimating gas and liquid saturation according to the change of temperature field	4
Source of organic matter and paleoenvironment of deposition of crude oils from the Niger Delta Basin	4
Regeneration of waste rolling oil via poly diallyl dimethyl ammonium chlorid	4
The characteristics of petroleum seepage in coal seams: a case study of Ordos Basin	4
Determination of radius of drilling influence zone around the wellbore using strain energy method	4
Organic geochemical characteristics and sedimentary environment of source rocks in Northern and Southern Linhe Depression, Hetao Basin	4
Effective parameters of Mo recovery from spent homogeneous nanocatalyst in slurry phase hydroconversion processes	4
Numerical simulation of vertical-lateral competitive propagation of multiple fractures in multi-layered formations	4
Ethoxylated lauryl alcohol mixture applied as drilling fluid for filter cake removal: experimental design and formulation optimization	4
Fault structure control of gas-water production differences from coalbed methane cluster wells in complex tectonic zones: a case study of the Dahebian block in Liupanshui coalfield, Western Guizhou, C	4
Self-foamed biosystem for deep reservoir conformance control	4
Investigation of thermophysical properties of synthesized SA and nano-alumina reinforced polyester composites	4
One practical CaCl2-weighted fracturing fluid for high-temperature and high-pressure reservoir	4
Fracture prediction and application in carbonate reservoirs based on the rescaled range analysis- finite difference numerical analysis methods	4
Physics-data fusion for digital metering of gas-liquid two-phase flow in oil nozzles	4
Breakthrough pressure and in-source/near-source migration of shale oil in saline lacustrine hybrid source rock systems - A case study of the West Qaidam Depression, Qaidam Basin, China	4
High-performance polymers based on PEG and PAMAM dendrimer to inhibit clay swelling in water	4
Functions and performance of sensors for slope monitoring in opencast coal mines – laboratory experimentation	4
Strength and fatigue analysis of mudline wellhead and its tie-back system in offshore drilling	4
Numerical analysis of running resistance of a completion string with packers and sliding sleeves in horizontal wells	4
Investigation on friction pressure of oil storage and brine discharge in underground salt caverns	4
Simulation research on erosion of downhole tools with groove structure during hydraulic fracturing	4
An insight into wax/asphaltene deposition behavior in the wellbore regions of gas condensate reservoirs	4
Simulation of proppant conductivity test: effect of particle size dispersion	4
Adjacent well casing damage caused by fluid pressure intrusion in multistage fracturing	4
Organic geochemical studies and origin of black hydrocarbon material (heavy oil) produced from Risha gas field (Jordon): insights into produced contaminated organic-inorganic materials during producti	4
An overview of organic geochemical indices to evaluate conventional petroleum source rocks: a summary of examples from the Indian Subcontinent	4
A review on fundamental principles of a natural gas hydrate formation prediction	4
Study on hydrodynamic dual acoustic wax prevention based on arbitrary Lagrangian-Eulerian fluid-solid coupling methods	4
Estimating the minimum miscibility pressure (MMP) of methane-live oil using the slim tube test, by modified oil recovery factor (MORF) and break-over pressure (MBOP) criteria	4
Precise three dimensions reconstruction closure experiment and a new apparent compliance model for self-propped fractures	4
Exploring the efficacy of various surfactants on the kerosene fuel and its electrical conductivity responses	4
Environmental impact of waste plastic pyrolysis oil on insulated piston diesel engine with methoxyethyl acetate additive	4
Effect of different biomass on properties of slurry fuel based on petroleum coke and municipal sludge	3
Back propagation neural network model for controlling artificial rocks petrophysical properties during manufacturing process	3
An investigation of factors affecting Low Tension Gas process for enhanced oil recovery in carbonate reservoirs	3
Investigation on the water-coning control by CO2 injection in strong bottom water reservoir	3
1-D basin modeling, 3-D reservoir mapping and source rock generative potential of Balkassar oilfield, Potwar basin, Pakistan	3
Depositional environments and sequence stratigraphy of the Arab Formation, Persian Gulf, Offshore Iran	3
A review of mechanisms influencing stable rheology complex Pickering foams for carbon utilization & storage in subsurface formations	3
Experimental analysis of the effect of zinc oxide nano additive diesel-ethanol blend on the performance and emission characteristics of a variable compression ratio diesel engine at various compressio	3
Numerical simulation of depressurization production of natural gas hydrate in different well types	3
Effect of n-butanol on cotton seed oil biodiesel: an approach for improving the emission behavior of DI diesel engine	3
Effect of underflow diameter on the separation performance of natural gas hydrate desanding and purification under back pressure	3
Recent advances in ASP flooding and the implementation of nanoparticles to enhance oil recovery: a short review	3
Evaluation of Nong’an oil shale reservoir stimulation based on nitrogen injection	3
Investigation of petroleum products dehydration using natural zeolite and activated carbon	3
Simulation of oil flow in a heat traced piping segment – COMSOL versus analytical trends	3
Effects of effluent pressure on the thermal cracking of crude oil: insights from thermal simulation experiments and phase analysis	3
Effects of ultrasonic waves on water imbibition into oil-wet carbonate reservoirs (a case study)	3
Investigation of parameters toward development of an empirical model for the pyrolysis of black oil-shale	3
Gas content prediction model of water-sensitive shale based on gas–water miscible competitive adsorption	3
Numerical prediction of phase equilibrium conditions of gas hydrates up to 200 MPa in the presence of sodium and calcium chloride solutions	3
Influence of chemical and crystallite parameters of asphaltenes on their thermal decomposition and electrokinetic behavior	3
Determination of cell voltage and current efficiency in a chlor-alkali membrane cell based on machine learning approach	3
Microbial community diversity and potential bioremediation of drill cuttings in two oil reservoirs	3
Application of Geostatistical Inversion Technology in Nanpu Oilfield: taking 1-5 area in the Dongyi section of Nanpu Depression as an example	3
Sedimentary characteristics of deep-lacustrine fans: a case study on the lower Jurassic Sangonghe formation of the Turpan Basin, NW China	3
A coupled model for predicting thermophysical properties of saturated steam in dual-tubing SAGD horizontal wells with toe-point injection technique	3
Inhibition of calcium carbonate scale under severe conditions	3
Experimental study on invasion law of oil rim in condensate gas reservoir with bottom water and oil rim	3
Well production interference ratio in tight sandstone gas reservoir and its inspiration to well pattern optimization: a case study of Sulige gas field, NW China	3