Journal of the Air & Waste Management Association

Article	Citations
List of Reviewers	59
Environmental sampling for disease surveillance: Recent advances and recommendations for best practice	55
Environmental gains in the collection of packaging waste obtained in Uskudar district by changing the collection type	44
Numerical simulation on exhaled aerosol transmission based on realistic oral-nasal structures and temperature distribution	44
An assessment of the uncertainties of methane generation in landfills	39
The most important technologies and highlights for biogas production worldwide	38
Remembering S. Trivikrama Rao	30
Assessment of aeolian dust concentration, elemental composition, and their wet and dry deposition fluxes over the Northeast Arabian Sea	26
Discussion of “Atmospheric reduced nitrogen: Sources, transformations, effects, and management”	21
Assessing the spatial distribution of odor at an urban waterfront using AERMOD coupled with sensor measurements	18
Observations of ozone, acyl peroxy nitrates, and their precursors during summer 2019 at Carlsbad Caverns National Park, New Mexico	18
Development, evaluation, and implementation of building downwash and plume rise enhancements in AERMOD	18
Experimental study of a full-scale hexagonal wet electrostatic precipitator for collection of black carbon and particulate matter generated by a marine diesel engine	18
A meta-analysis of particulate matter and nitrogen dioxide air quality monitoring associated with the burden of disease in sub-Saharan Africa	17
Dr. Jeffrey L. Collett, Jr. Selected as New Technical Editor in Chief of the Journal of the Air & Waste Management Association	17
A fond farewell from the technical Editor-in-Chief	17
Formation of secondary organic material from gaseous precursors in wood smoke	17
Predictors of indoor radon levels in the Midwest United States	16
Survey on the current leachate treatments of public municipal solid waste landfills and the potential impact of per- and polyfluorinatedalkyl substances in the Eastern and Northwestern United States	16
Emission factors of industrial boilers burning biomass-derived fuels	15
In memoriam: Delbert J. Eatough (1940–2022)	15
Regional impacts on air quality and health of changing a manufacturing facility’s grid-boiler to a combined heat and power system	14
Critical review on PFOA, kidney cancer, and testicular cancer	14
Food processing by-products and wastes as potential dust suppressants at mine sites: Results from unconfined compressive strength testing	14
Realistic operation of two residential cordwood-fired outdoor hydronic heater appliances—Part 2: Particle number and size	12

Effect of medium-density fiberboard wastes ash on calcium silicate hydrate crystal of concrete	12
Key results from the salt lake regional smoke, ozone, and aerosol study (SAMOZA)	12
Evaluation of the adsorption performance and thermal treatment-associated regeneration of adsorbents for formaldehyde removal	12
Impacts of the COVID-19 pandemic on landfilling and recycling in the city of Fargo, North Dakota, USA	11
Deployment of networked low-cost sensors and comparison to real-time stationary monitors in New Delhi	11
Measurement of visible dust emissions during almond nut-picking operations at various harvester settings	11
Managing the organic municipal waste in Palestine: Linking policy, practice, and stakeholders’ attitude toward composting	11
Development and validation of a route planning methodology for vehicle-based remote measurements of methane and other emissions from oil and gas wells and facilities	10
Meteorological based parameters and ozone exceedances in Houston and other cities in Texas	10
Summary of PM2.5 measurement artifacts associated with the Teledyne T640 PM Mass Monitor under controlled chamber experimental conditions using polydisperse ammonium sulfate aerosols and bi	10
Ammonia emissions from a dairy housing and wastewater treatment plant quantified with an inverse dispersion method accounting for deposition loss	10
2022 List of Reviewers	10
Opportunities and challenges with implementing a recycling program for municipal solid waste incineration (MSWI) bottom ash as a construction aggregate: A programmatic review	10
Review on COD and ammoniacal nitrogen removal from landfill leachate using low-cost adsorbent	10
Evaluation of selected solid adsorbents for passive sampling of atmospheric oil and natural gas non-methane hydrocarbons	10
Removal of a mixture of formaldehyde and methanol vapors in biotrickling filters under mesophilic and thermophilic conditions: Potential application in ethanol production	10
Unveiling underutilized public data on Canadian industrial pollutant transfers and disposals	9
Intelligent identification of fragmented non-magnetic materials for end-of-life refrigerator recycling	9
Status and development of spent mushroom substrate recycling: A review	9
Reaction kinetics and isotherms of commercial activated carbon in variable pressure adsorption of high compound VOCs	9
A reflection on 10 years of the Air Quality Model Evaluation International Initiative	9
Spatial distribution of airborne bacterial communities in caged poultry houses	8
Computational modeling of woodstove pollutants in dilution tunnels	8
The air quality of Palangka Raya, Central Kalimantan, Indonesia: The impacts of forest fires on visibility	8
Evaluation of a new low-cost particle sensor as an internet-of-things device for outdoor air quality monitoring	8
Assessment of waste workers occupational risk to microbial agents and cytotoxic effects of mixed contaminants present in the air of waste truck cabin and ventilation filters	8
Effects of electrode materials and dimensions of an electrostatic spray scrubber on water droplet charging for dust removal	8
Spatio-temporal trajectory evolution and cause analysis of air pollution in Chengdu, China	8
Monitoring gaseous pollutants using passive sampling in the Philadelphia region	8
A brief review of methods for determining time-activity patterns in California	7
Development of an integrated duty cycle test method to assess cordwood stove performance	7
Mobile laboratory measurements of air pollutants in Baltimore, MD elucidate issues of environmental justice	7
Impacts of wood species and moisture content on emissions from residential wood heaters	7
Correction	7
Introduction to the 2025 A&WMA Critical Review: Satellite data to support air quality assessment and management	7
Climate change and extreme weather: A review focusing on the continental United States	7
Impact of fueling protocols on emission outcomes for residential wood-fired appliances	7
Estimation of landfill gas production and potential utilization in a South Africa landfill	7
Climate change in the human environment: Indicators and impacts from the Fourth National Climate Assessment	7
Research on the types and toxicity of VOCs released from solvent-based inks in high temperature environment	7
Online measurement of PM from residential wood heaters in a dilution tunnel	7
Influence of acid and thermal treatment on regeneration of spent bleaching clay and conversion of residual oil to biodiesel	7
Assessment of progress toward regional haze rule visibility goals using United States anthropogenic emissions rate of progress	6
Realistic operation of two residential cordwood-fired outdoor hydronic heater appliances—Part 3: Optical properties of black and brown carbon emissions	6
Impact of lane-changing behavior on traffic emissions of road sections in multi-dimensional mixed traffic flow environment	6
In memoriam: Peter K. Mueller (1926–2023)	6
Source apportionment of measured volatile organic compounds in Maricopa County, Arizona	6
Decision-making in biogas production projects: Paradigms and prospection	6
Recovery of complete crystalline silicon cells from waste crystalline silicon photovoltaic modules	6
Review and analysis of personal-ambient ozone measurements	6

Evaluating PM 2.5 element concentration measurements for a nationwide monitoring network	6
Evaluating the efficiency of municipal solid waste collection and disposal in the Yangtze River Delta of China: A DEA-model	5
Impact of PM 2.5 filter extraction solvent on oxidative potential and chemical analysis	5
Ozone management in Colorado: Why aren’t we there yet?	5
A multi-criteria approach to test and evaluate the efficiency of two composting systems under two different climates	5
Estimation of total landfill surface methane emissions using geospatial approach combined with measured surface ambient air methane concentrations	5
Low temperature destruction of gas-phase per- and polyfluoroalkyl substances using an alumina-based catalyst	5
A sincere thanks to our reviewers for their invaluable contributions	5
Residential wood heating: An overview of U.S. impacts and regulations	5
Equilibrium and hysteresis formation of water vapor adsorption on microporous adsorbents: Effect of adsorbent properties and temperature	5
Status, characterization, and quantification of municipal solid waste as a measure towards effective solid waste management: The case of Dilla Town, Southern Ethiopia	5
Absorption photometry of patterned deposits on IMPROVE PTFE filters	5
Circular economy for lithium-ion batteries and photovoltaic modules—status, challenges, and opportunities	5
Research on modified blast furnace dust in demulsification: The synergistic effect of ferric oxide, hydrophobic carbon, and polysilicate	5
Quantifying residual elemental carbon by thermal-optical analysis using an extended IMPROVE_A protocol with higher maximum temperature	5
An alternative generic groundwater-to-indoor air attenuation factor for application in commercial, industrial, and other nonresidential settings	5
Application of the U.S. EPA procedure for determining method detection limits to EDXRF measurement of filter-based aerosol samples	5
Determining the bilge water waste risk and management in the Gulf of Antalya by the Monte Carlo method	5
Characterization of emissions from burning methyl-bromide-treated crop biomass	5
Long-term spatiotemporal evolution and coordinated control of air pollutants in a typical mega-mountain city of Cheng-Yu region under the “dual carbon” goal	5
Evolution of community residents’ waste classification behavior based on multi-agent simulation	5
A spatial approach to assessing PM 2.5 exposure level of a brickmaking community in South Africa	4
Geo-spatial technology based on a multi-criteria evaluation technique used to find potential landfill sites in the town of Bule Hora in southern Ethiopia	4
Health impact assessment of air pollution in Lisbon, Portugal	4
Investigation of harbor craft activities for emission inventory calculation	4
Disposal and resource utilization of oil-based drill cuttings in China: A review	4
On the techniques and standards of particulate matter sampling	4
Effective methods for the decontamination of healthcare waste: Ozone and UV-C radiation process	4
On the nonlinear relation between the Coefficient of Haze and Elemental Carbon mass concentration	4
Synthesis of natural starch fromElaeis guineensistrunk biomass applying bisulphite steeping method: Optimization by RSM	4
A sincere thank you to all our contributors as JA&WMA continues to improve its impact	4
Correction	4
Estimates of emissions from hydrogen transportation fueling infrastructure and vehicles	4
A case study of surface ozone source contributions in the Seoul metropolitan area using the adjoint of CMAQ	4
Analysis of EPA air toxics monitoring data and tools for use in general population exposure assessments: Using acrylonitrile as a case study	4
Introduction to Invited Papers on Climate Change	4
Evaluation of a revised AERMOD treatment of plume dispersion in the daytime elevated stable layer	4
Assessment of light-duty versus heavy-duty diesel on-road mobile source emissions using general additive models applied to traffic volume and air quality data and COVID-19 responses	4
Association between particulate matter air pollution and heart attacks in San Diego County	4
Introduction to the 2024 Critical Review: Atmospheric reduced nitrogen: Sources, transformations, effects, and management	4
Regional temperature-ozone relationships across the U.S. under multiple climate and emissions scenarios	4
MSW-Net: A hierarchical stacking model for automated municipal solid waste classification	4
Community and environmental data-driven monitoring of waste management	4
Reconstruction of a closed-loop ecological cycle system anchored by large-scale load-balancing biogas and its economic viability assessment	4
Research on the shielding effect of the electrode frames in the electrostatic precipitator	4
Distribution of Aspergillus section Nigri at shochu fermenting places in Japan	4
Effect of operating conditions and technology on residential wood stove emissions of criteria, greenhouse gas, and hazardous air pollutants	3
Thermal separation of plastic components from waste crystalline silicon solar cells: Thermogravimetric characteristics and thermokinetics	3
Ryegrass root-soil composites mechanical properties and its slope stability: Experimental study and numerical analysis	3
The extraction of inorganic phase-change materials from sugar industry wastes with the purpose of solid waste management	3
The Joint Clean Air Actions and air quality spillovers in China	3
Air quality assessment of poultry and swine houses in Chonburi Province	3
Ambient sampling of real-world residential wood combustion plumes	3
Ozone sensitivity to high energy demand day electricity and onroad emissions during LISTOS	3
Top 10 Best-performing Reviewers	3
Fugitive gypsum dust deposition on a neighboring wildlife refuge, Antioch Dunes, California, USA	3
Effects of adding biochar on the preservation of nitrogen and passivation of heavy metal during hyperthermophilic composting of sewage sludge	3
Determinants of the choice of disposal methods among residents in urban areas in Southern Ghana	3
Assessment of waste workers occupational risk to microbial agents and cytotoxic effects of mixed contaminants present in the air of waste truck cabin [Letter]	3
Incorporating the impact of roadside barrier effects on dispersion into AERMOD	3
Indoor monoterpene emission rates from commercial cannabis cultivation facilities in Colorado	3
Optimization model for bus priority control considering carbon emissions	3
Biodegradable dust suppressants prepared from biomass-based materials: The role of viscosity and suppressed particles	3
Future year (2028) source apportionment modeling to support Regional Haze Rule planning in the western U.S.	3
Theoretical and experimental studies on characterization and collection of particulate matter in single-wire, single-stage electrostatic precipitator with square cross-section	3
Influence of seasons and sites on bioaerosols in indoor wastewater treatment plants and proposal for air quality indicators	3
A literature review of the state of the art of sustainable waste collection and vehicle routing problem	2
Experimental study and numerical simulation of the kinetic energy recovery of the mine’s exhaust gas	2
Long-term trends in British Columbia lower mainland air quality: Criteria air pollutants and VOC	2
Use of municipal solid waste incineration (MSWI) bottom ash as a permeable subgrade material: An experimental and mechanism study	2
Developing innovative treatment technologies for PFAS-containing wastes	2
Introduction to the A&WMA 2022 critical review: A critical review of circular economy for lithium-ion batteries and photovoltaic modules—status, challenges, and opportunities	2
Accounting for plume rise of aircraft emissions and shoreline meteorology enhances AERMOD’s description of concentrations measured around Los Angeles airport	2
Evaluation of different composting systems on an industrial scale as a contribution to the circular economy and its impact on human health	2
A review on medical waste treatment in COVID-19 pandemics: Technologies, managements and future strategies	2
Introduction to Special Issue on Residential Wood Combustion	2
Mobile VOC measurements in Commerce City, CO reveal the emissions from different sources	2
Adenosine triphosphate (ATP) bioluminescence-based strategies for monitoring atmospheric bioaerosols	2
Public perception and knowledge on air pollution and its health effects in Makkah, Saudi Arabia	2
The occurrence, transformation and control of selenium in coal-fired power plants: Status quo and development	2

Mineral extraction from asbestos-containing waste (ACW) and changes in its morphology during treatment with ammonium salts	2
From conventional approaches to circular systems: Evolution of waste management in mega-sporting events	2
Developing service-based web application for determining waste bin locations	2
Field application of cost-effective sensors for the monitoring of NH3, H2S, and TVOC in environmental treatment facilities and the estimation of odor intensity	2
Incorporation of RLINE into AERMOD: An update and evaluation for mobile source applications	2
Investigation of carbon footprint effect of renewable power plants regarding energy production: A case study of a city in Turkey	2
A call to action for global solutions to air quality crisis: Urgent actions and innovative solutions needed	2
Air permitting for Colorado stationary sources in disproportionately impacted communities	2
Evaluation on production trend, compositions, and impact of plastic waste in Chengdu, southwestern China	2
Performance evaluation of a recurrent deep neural network optimized by swarm intelligent techniques to model particulate matter	2
Source characterization of volatile organic compounds at Carlsbad Caverns National Park	2
Fate and transport of viable Bacillus anthracis simulant spores in ambient air during a large outdoor decontamination field exercise	2
Management of the construction and demolition waste (CDW) and determination of the best disposal alternative by FAHP (Fuzzy Analytic Hierarchy Process): A case study of Tehran, Iran	2
Novel cost-effective oxygen-enriched melting method for MSWI fly ash	2
Study on the appropriate scales of breeding-type family farms from the perspective of quantifying resource losses	2
Evaluating the feasibility of muck from slurry shield tunnels as a growth medium for landscaping	2
Evaluation of energy potential of MSW in the Tamale metropolis, Ghana: An assessment of solid waste characteristics and energy content	2
Development of brake activity measurement method for heavy-duty vehicles	2
Characterization of PFAS air emissions from thermal application of fluoropolymer dispersions on fabrics	2
Evaluating the filtration efficiency of commercial facemasks’ materials against respiratory aerosol droplets	2
Pyrolysis processing of PFAS-impacted biosolids, a pilot study	2
Non-nulling protocols for fast, accurate, 3-D velocity measurements in stacks	2
A fuzzy control algorithm for tracing air pollution based on unmanned aerial vehicles	2
Experimental study on ratio optimization and application of improved bonded dust suppressant based on wetting effect	2
Influence of ethanol-gasoline blended fuel on performance and emission characteristics of the test motorcycle engine	2
Experimental study and kinetic model analysis on photothermal catalysis of formaldehyde by manganese and cerium based catalytic materials	2
Evaluation of a self-cleaning portable dust collector for reducing worker exposures to silica at hydraulic-fracturing sites	2
A novel assessment framework for improving air quality monitoring network layout	2
Incorporating meander to account for the impact of low winds in area source modeling; AERMOD as a case study	2
First-time calculation of the spatial distribution of concentration and air quality index over South Africa using TROPOMI data	2
A critical review of the circular economy for lithium-ion batteries and photovoltaic modules – status, challenges, and opportunities	2
Adsorption characteristics of the carbonaceous adsorbents for organic compounds in a model exhaust gas from thermal treatment processing	2
In-situ measurements of emissions and fuel loading of non-catalytic cordwood stoves in rural Oregon	2
Risk of overestimating odor control performance with the removal efficiency of a single odorant: Odorant interactions during the chemical absorption	2
A research on dust suppression mechanism and application technology in mining and loading process of burnt rock open pit coal mines	2
Development of a CFD model indicating the quantitative relationship among reactor dimension, bed flow unevenness, and performance for VOCs biofilters	2
Raman spectroscopy for identifying postconsumer packaging plastics for recycling	2
Terpene exhaust emissions and impact ozone modeling from cannabis plants at commercial indoor cultivation facilities in Colorado	2
Comparative analysis of the characteristics of carbonaceous material obtained via single-staged steam pyrolysis of waste tires	2
Potential of solid recovered fuel production from autoclave treated healthcare waste in Sultanate of Oman	2