OOIR: Observatory of International Research

Papers

(The TQCC of Journal of the Korean Ceramic Society is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)

Article	Citations
Control of particle morphology and size of yttria powder prepared by hydro(solvo)thermal synthesis	82
Densification, microstructural characterization, and the electrochemical behaviour of spark-plasma sintered Ti6Al4V-5Cr-TiB2 composites	58
Structure, electrical, and dielectric properties of Ba1−xYxTi(1−x/4)O3 ceramics sintering at low temperature	41
Effect of CaO on the dissolution property, surface zeta potential and antibacterial properties of ZnO–Na2O–B2O3–SiO2 glass system	41
Phase transformation behavior of Ca-doped zirconia sintered at different temperatures	36
Research on anti-corrosion graphene coatings with promising properties	33
Craved Ni3S2–Sm2O3 heterojunction with enhanced electrocatalytic stability and oxygen evolution reaction	32
Fabrication of hollow MgO granules via freeze granulation as a filler for lightweight thermal interface materials	28
The electronic, thermodynamic, thermoelectric and optical properties of Ca(InP)2 compound: DFT study	27
Enhanced photocatalytic activity of CuxNi1−xFe2O4 -rGO composite	25
Functional materials for modifying interfaces between solid electrolytes and lithium electrodes of all-solid-state lithium metal batteries	24
SiC-based materials produced by explosive compaction of powders without sintering	24
Photoelectrochemical properties of CuO nanostructures grown on a porous CuO seed layer	22
Enhanced polarization retention and softening in [001]-oriented Pb(Mg1/3Nb2/3)-PbTiO3 single crystals through corona poling	21
Direct synthesis of porous calcium-hexaluminate aggregate for refractory applications	21
Fabrication of novel FeSe–GO composite: a highly efficient electro-catalyst for oxygen evolution reaction	21
Tuning the physical properties of Sb-doped ZnO nanopowders toward elevated photosensing and photocatalytic activity	19
Effect of sintering additives of carbon black, SiC, Al2O3, and Al2O3 + Y2O3 on microstructure and mechanical properties of B4C ceramics	18
Facile synthesis of SmSe2 over multiwalled carbon nanotubes for efficient water-splitting applications	18
Microstructure, dielectric relaxation, optical, and ferroelectric studies of a lead-free double perovskite: BaLiFeMoO6	18
Exploring the optoelectronic properties of novel lead-free double halide perovskites Cs2NaInX6 (X = Br, Cl, I) for photovoltaic applications: DFT study	17
Structural and antibacterial activity of developed nano-bioceramic DD3/ZrO2/ZnO/CuO powders	17
A new design of SiO2–Na2O–Al2O3 glass–ceramic and determination of elastic modulus and density of states via molecular dynamics simulations based on density functional tight-binding calculations	16
Review of the thermally stimulated depolarization current (TSDC) technique for characterizing dielectric materials	16
Crystal structures, ferroelectric properties, and piezoelectric properties of Sn-doped epitaxial BaTiO3 thin films	16

Temperature and frequency depended structural, morphological, and electrical topographies of Bi2MnFeO6 double perovskite	16
Crystallographic structure and ferroelectricity of epitaxial hafnium oxide thin films	15
The effect of carbon fiber length on the microstructure, selected mechanical, wear, and thermal conductivity of Cf/SiC composite fabricated via spark plasma sintering (SPS) method	15
Design of tin polyphosphate for hydrogen evolution reaction and supercapacitor applications	15
Crystallization kinetics of lithium–aluminum–germanium–phosphate glass doped with MgO using a non-isothermal method	14
Sub-switching domain effect for analysis the non-linear dielectric behavior of (K0.49 Na0.49Li0.02) (Nb0.98Sb0.02)O3 ceramic based on Rayleigh model	14
Effect of boron nitride (BN) on mechanical and dielectric properties of fused silica ceramic composites	14
Hybrid ceramics-based cancer theranostics	13
Improving of the luminous efficacy of the YAG:Ce phosphor in glass by doping with the transition metals into the glass frits	13
Defect chemistry of p-type perovskite oxide La0.2Sr0.8FeO3-δ: a combined experimental and computational study	13
Mechanical behaviour of porous kaolin-based ceramics for potential catalysts support applications	13
Fabrication of transparent amorphous silica by controlling forming and sintering processes with spherical nano-silica powder	13
Microwave absorption and photocatalytic activity of MgxZn1−x ferrite/diatomite composites	13
Enhanced NO2 gas sensing performance of microwave irradiated SnO2-ZnO nanocomposites prepared by a rotational hydrothermal method	13
In situ growth of CdS spherical nanoparticles/Ti3C2 MXene nanosheet heterojunction with enhanced photocatalytic hydrogen evolution	12
Effect of separator coating layer thickness on thermal and electrochemical properties of lithium-ion secondary batteries	12
Preparation of mullite-HfN composites through spark plasma sintering: investigation of the microstructure and mechanical properties	12
Strategy to enhance the thermoelectric performance in Ti-doped Cu3SbSe4	12
Effects of attrition milling on the microstructure and piezoelectric properties of BiFeO3–BaTiO3 ceramics	12
A study on mixed cation perovskite-based UVC photodetector with improved performance	12
Synthesis of superparamagnetic and whole visible light-photocatalytic Ni0.5Zn0.5Fe2O4-core/Ag2O-capped TiO2-shell nanospheres	12
Design of optimized halide vapor phase epitaxy (HVPE) conditions for uniform α-Ga2O3 growth based on CFD analysis	11
Composition and performance of electrolyte for wide-temperature aluminum electrolytic capacitors	11
Development of a continuous fabrication process for large-scale reaction bonded SiC filter tube by a continuous Si melt infiltration	11
CeSe nanocube anchored on the nanosheet of reduced graphene oxide (rGO) as a binder free electrode for energy conversion system	10
Dielectric properties and thermal conductivity of Si3N4–SiC composite ceramics	10
Preparation of multiferroic lead iron niobate thin film with low crystallization temperature via sol–gel method using monoethanolamine	10
Wollastonite coating on zirconia substrate by room temperature spray processing	10
Effects of ZnO and cordierite contents on the wetting properties of a Bi2O3–ZnO–B2O3 glass composite as a low-melting sealing glass	10
Spray pyrolysis-based synthesis of self-floating black TiO2-x microspheres for solar-driven interfacial evaporation	10
Photosensitive Al2O3 slurry with high solid content and low viscosity	10
Physicochemical and structural characterization of novel praseodymium and neodymium-incorporated TiO2 for photocatalytic application	9
Review on transparent polycrystalline ceramics	9
Evaluating the chemical stability of SiO2, Al2O3, and MgO in LiCl-based molten salts for enhanced oxide reduction	9
Fabrication of hollow titania fibers by electro-spinning for photocatalytic degradation of organic dyes	9
Highly stretchable and self-healing SEBS-PVDF composite films for enhanced dielectric elastomer generators	9
Facile synthesis of strontium selenide supported copper sulfide hybrid nanosheets as an efficient electrode for high-performance OER	9
Low thermal conductivity and high durability porous thermal insulation coating via room–temperature spray coating process	9
Electrochemical properties of Ba0.5Sr0.5Co0.8Fe0.2O3 and BaZr0.65Ce0.20Y0.15O3 composite cathodes on Y-doped barium–cerium–zirconium oxide solid electrolyte	9
Stretchable resistive switching memory devices for wearable systems	9
Recent progress in oxygen electrodes for protonic ceramic electrochemical cells	9
Understanding redox cycling behavior of Ni–YSZ anodes at 500 °C in solid oxide fuel cells by electrochemical impedance analysis	9
Effect of heat treatment on the wear behavior of WC-Ni-Cr and WC-Ni-Cr + Cr3C2 coatings fabricated by high-velocity oxy-fuel method	8
Wettability and physicochemical characteristics of biphasic calcium phosphate mixtures depending on the ratio of hydroxyapatite and β-tricalcium phosphate	8
Transparent alumino-boro-phosphate glass coating on a thermally tempered soda-lime silicate glass substrate	8
First-principles calculations to investigate structural, optoelectronic and thermoelectric properties of Sn-based halide perovskites: CsSnCl3 and CH3NH3SnCl3	8
Effect of hydrothermal temperature on phase transformation and mechanical property of non-sintered hydroxyapatite and its in vitro solubility	8
Synthesis and characterization of PANI/MOF-199/Ag nanocomposite and its potential application as non-enzymatic electrochemical sensing of dopamine	8
Novel complex-perovskite NaNbO3 − Bi(Li1/3Hf2/3)O3 lead-free ceramics with improved energy-storage performance and reduced leakage current	8
Phase formation, microstructure, and electrical properties of lead-free BNBLT-CZ ceramics synthesized via the solid-state combustion technique	8

Recent progress in graphene-reinforced biomimetic ceramic composites: a review	8
Bandgap modulation and charge separation in sulfur-doped g-C3N4/ZnMn2O4 nano-composites for efficient visible-light photocatalysis	8
Photoluminescence characterizations in phase transition alumina with boehmite nanostructures	8
Enhancement of thermal-electrical like response by flexoelectric effect in sodium bismuth titanate bilayer ceramics with compositional inhomogeneity	8
Structural, microstructural, dielectric, transport, and optical properties of modified bismuth ferrite	8
Domain wall currents and ferroelectric domain structures of PbTiO3 thin films on highly oriented pyrolytic graphite (HOPG) substrates	8
Enhancing efficiency of Cs2AgBiBr6 double perovskite solar cells through bandgap reduction by molybdenum doping	7
Synthesis and luminescence characteristics of manganese-doped ZnSe quantum dots synthesized in aqueous solution through internal doping	7
Effect of La substitution on the structural, optical, ferroelectric, and electrical properties of BiFeO3	7
Antibacterial persistence of hydrophobically glazed ceramic tiles	7
Structural phase transition and optoelectronic properties of lead-free AgNb1-xTaxO3 (x = 0, 0.5 and 1) perovskite systems	7
High-efficiency energy storage in Cr-modified BiFeO3 thin films with suppressed leakage current and improved ferroelectricity	7
Synthesis and characterization of complex pervoskite BMT ceramics and the effect of gamma radiation at microwave frequency	7
Novel high-Q × f (1 − x)CeO2–xCaF2 (0.2 ≤ x ≤ 0.6) microwave dielectric ceramics sintered at medium temperatures	7
Energy materials for energy conversion and storage: focus on research conducted in Korea	7
Scalable synthesis of MOFs-derived ZnO/C nanohybrid: efficient electrocatalyst for oxygen evolution reaction in alkaline medium	7
Fabrication and evaluation of C-ring strength of SiCf/SiC composite tube	7
A review of photocatalytic CO2 reduction: exploring sustainable carbon emission mitigation from thermodynamics to kinetics and strategies for enhanced efficiency	7
Understanding the luminescence in Yb3+ co-doped Sialon: Eu2+/Eu3+ transparent phosphor ceramic plate	7
Layered double hydroxide nanomaterials for bifunctional ORR/OER electro-catalyst	7
Optimization of AlOOH powder characteristics for enhanced separator performance and stability in lithium-ion batteries	6
Sol–gel synthesis of soda lime silica-based bioceramics using biomass as renewable sources	6
Large intraparticle mesoporosity of hierarchical ZSM-5 synthesized from kaolin using silicalite seed: effect of aging time and temperature	6
Structural, electrical, optical and magnetic properties of Bi2-xLaxFeCrO6 (x = 0.4, 0.6) double perovskites for device applications	6
High-temperature oxidation-resistant glass–ceramic/YSZ composite coatings for gas turbine engine applications	6
Correction: Femtosecond laser-induced KOH etching for in-volume microfluidic channels in corning EagleXG glass	6
Synthesis of W-doped VO2 nanoparticles via an aqueous ammonia solution route using WO3 and V2O5 powders and fabrication of thermochromic smart-window composites	6
Mechanical constraint to extend the operational range of (011)-oriented Mn-doped PIN–PMN–PT single crystals	6
Sol–gel synthesis and structural and luminescent characteristics of a Gd0.96Eu0.01Sm0.01Tb0.01Er0.01Nb0.9Ta0.1O4 polycomponent solid solution	6
Thermal shock resistance of mullite/Sr-celsian/zirconia composites	6
Chemical synthesis and photoelectrochemical study of CdS/rGO nanocomposite films	6
Exploring the role of TiN electrodes in the formation of ferroelectric HfxZr1-xO2 thin films through transmission electron microscopy	6
Magnetic, electric and magnetocaloric properties of EuFe0.5Mn0.5O3 perovskite: Monte Carlo study and ab-initio calculations	6
Competing effects of Ca doping on the phase transition and related properties in (Ba1–xCax)(Ti0.95Sn0.05)O3 ceramics	6
Green synthesis and characterization of Ag-doped ZnO nanofibers for photodegradation of MB, RhB and MO dye molecules	6
Mullite-bonded porous SiC-based Mn3O4–Ni system: control of electrical resistivity, flexural strength, and extrusion	6
Tb3+-sensitized Yb3+ downshifting emission, host-sensitized Yb3+ quantum-cutting emission, Yb3+ sensitized Tb3+ upconversion emissions, and special thermal quenching mechanism in Tb3+/Yb3+-doped NaY(W	6
Design strategies for electrochromic displays	6
Investigation of structural, optoelectronic, and transport properties of A2AuSbZ6 (A = Na, K, and Z = F, Cl) double perovskites for energy conversion applications	6
Effect of surface/subsurface defects on the surface integrity of ceramic materials	6
High-efficiency photocatalytic hydrogen production with Zn-VIA (VIA=O, S, Se, Te) enhanced by lamellar Cu2MoS4 under visible light	6
Study on the pore/scratch-strength response of ZrB2–SiC ceramic via laser processing	6
Advanced heterostructure Cu2O photocathodes with noble-metal-free nanolayers for efficient solar water splitting	6
Compositional study of borosilicate CsPbBr3 perovskite nanocrystals embedded glass for chemically stable white LEDs	6
Magnetic, thermoelectric properties and magnetocaloric effect of Pr0.7Ba0.3MnO3 perovskite: experimental, DFT calculation and Monte Carlo simulations	6