Journal of Cultural Heritage

Article	Citations
Dating archaeological sites by seriation	88
The complex atmospheric corrosion of α/δ bronze bells in a marine environment	68
ours Elsevier	57
Calcium hydroxide, magnesium hydroxide, silicon dioxide nanoparticles and their combinations as consolidants for lime mortars and gypsum plasters	52
Crack morphology and its correlation with ground materials used in paintings by Danish portrait painter Jens Juel	51
Characterization of UVA-irradiated wheat paste and paste-coated paper	50
Infrared thermography as a tool to detect increasing cracking in granitic stones exposed to high temperatures	47
Modelling and safety assessment of observed sliding damage in a masonry rib vault	45
Advanced sampling, sample preparation and combination of methods applicable in analysis of compounds in aged and deacidified papers. A minireview	42
X-ray computed microtomography: A non-invasive and time-efficient method for identifying and screening Roman copper-based coins	40
Architectural assessment of wall paintings using a multimodal and multi-resolution diagnostic approach: The test site of the Brancacci chapel in Firenze	33
Impact of selected driers on the curing kinetics, thermodynamics, and molecular features of commercial artists' oil paints	32
CRMrp: An ontology to support the digital documentation of the conservation and restoration practice	32
Evaluation of archeological heritage exposure to wildfires through simulation techniques. A study case in Galicia (Northwestern Spain)	31
Machine learning-assisted vibrational spectroscopy for textile fiber identification in historical tapestries	30
Micro-destructive evaluation of the mechanical properties of lime-based mortars	29
Deterioration mechanism of vegetable tanned leather revealed by proteomics and structural analysis	29
Moisturizing an analogous earthen site by ultrasonic water atomization within Han Yangling Museum, China	29
New evidence on technique, ingredients and provenance of Sui Dynasty white porcelain: A case study in Xi'an, ancient China capital city (A.D. 581–618)	28
A theoretical comparison between the restoration of two contemporary works of art made of plastic	27
Editorial board	27
Foreword to the Special Issue “Chemistry for Cultural Heritage at the National Research Council”	26
Antifungal properties of oregano and clove volatile essential oils tested on biodeteriorated archaeological mummified skin	25
Safeguarding outdoor cultural heritage materials in an ever-changing troposphere: Challenges and new guidelines for artificial ageing test	24
Distinction between consecutive construction phases by combined microscopic study and quantitative pore space analysis: Case study of Horn's Bastion, Riga Castle (Latvia)	24

Revealing the iron skeleton of Notre-Dame de Paris. Methodologies and issues of archaeological and analytical investigations following the blaze	24
A smartphone-based innovative approach to discriminate red pigments in roman frescoes mock-ups	24
“Structure” working group: From the post-fire structural assessment of vaults to the study of the medieval wood framework for its reconstruction	22
The application of three-dimensional tomography and chemical mapping by soft X-ray microscopy to fungi spore on wood from the Nanhai No. 1 shipwreck	22
Quantifying subtle color transitions in Mark Rothko's abstract paintings through K-means clustering and Delta E analysis	21
Synthesis and characterization of interpenetrating network (IPN) based levan-polyacrylamide hydrogels and their application in conservation of cultural heritage	21
An experimental research on the rhombic pattern swords of Wu and Yue states during the Eastern Zhou Period, China	21
Rapid and non-destructive identification of the leather artifacts using FTIR-PCA	21
Risk analysis of biodeterioration in contemporary art collections: the poly-material challenge	21
Deng entropy and LSTM neural network to classify built cultural heritage with severe damage	21
The thermal conductivity of the masonry of handmade brick Cultural Heritage with respect to density and humidity	21
Green solvents and restoration: Application of biomass-derived solvents in cleaning procedures	21
Applicability of prompt-gamma activation analysis to determine elemental compositions of silicate-based cultural heritage objects and their raw materials	21
Green synthesis of silver-titanium dioxide nanoparticles using chestnut extract for the preservation of leather artifacts	20
Scientific study of bronze bells of the Western Zhou period recovered in Yichang, Hubei	20
The common, impressive method of drawing of celebrated prehistoric frescoes excavated in Thera, Crete and Thebes	20
An analytical study to verify the suitability of free and gelled siloxanes for the treatment of modern oil paintings	20
Designing a ‘yellow brick road’ for the archaeometric analyses of fired and unfired bricks	20
A high-resolution photogrammetric workflow based on focus stacking for the 3D modeling of small Aegean inscriptions	19
Wind-driven rain impinging on monuments and mountain slopes	19
Exploring the impact of cultural context on eye-tracking studies of architectural monuments in selected European cities: Sustainable heritage management	19
Application of microscopic imaging, multispectral techniques, and SEM/EDS analysis to the study of 19th century colour engravings	19
The visualization method of environmental risk assessment for metal cultural relics in museums based on Quick Response code	19
Potential of synchrotron X-ray diffraction computed tomography (XRDCT) for a 3D non-destructive and/or non-invasive characterisation of cultural heritage geomaterials (CHG)	19
Editorial board	19
Spatial configuration of fire protection for historical streets in China using space syntax	18
The role of magnesium species in paper deacidification. A review	18
A conceptual model for ancient Chinese ceramics based on metadata and ontology: A case study of collections in the Nankai University Museum	18
Domain generalization and punch mark classification	17
Protective coatings for metallic heritage conservation: A review	17
Salt weathering of antique Dutch ceramic tiles	17
The influence of the bricks and mortar characteristics, paint, and salts on the rising damp of historic masonries through hygrothermal simulation	17
Analytical methods for studying mummification technique and degradation process of a human mummy from the late period	17
Characterisation of the pigment “Jaune Peruvien” using in-situ SERS reveals murexide-Zn(II): From guano/snake faeces to pigment palette	16
Potential and limitations of adhesive identification on museum curated metal objects	16
Retentive bio-based chemical gel for removing glues from water-sensitive wooden artworks	16
The construction of a street never opened to traffic. The extraordinary discovery of pavement engineering in vicolo dei Balconi of Pompeii	16
Experimental investigation of environmental and material factors in darkening of historic and modern lead white	16
Cultural landscape visualization: The use of non-photorealistic 3D rendering as an analytical tool to convey change at statue of liberty national monument	16
Virtual reconstruction of Wanfoge in Beijing Zhihua Temple	15
2-Mercaptobenzimidazole compounded with the conventional sealer B72 for the protection of rusted bronze	15
Erratum to ‘Oak beams in medieval frameworks: Constraints and advantages for restoration’ [Journal of Cultural Heritage Volume 56C (July-August 2022) 108-117]	15
Old buildings need new ideas: Holistic integration of conservation-restoration process data using Heritage Building Information Modelling	15
Identification of pigments and binders of a 17th century mural painting (Bolivia). New report on pigments associated with Andean minerals	15
Titanium dioxide-based nanocoating to conservation of rigid PUR foams on cultural heritage	15
Enzymes as tools for conservation of works of art	15
Knowledge base construction for the semantic management of environment-enriched built heritage: The case of Algerian traditional houses architecture	15
Holographic and seismic comparative modal analysis on Radicofani fortress	14
Advancements in adaptive thermal comfort models: Application to the case study of Le Corbusierʼs Maison Jeanneret	14
New insights into the dyes of Central Asian ikat textiles	14

Deep learning-based damage detection and segmentation in the battledore of Darbhanga Fort	14
Laser diode-based projection lighting strategy with peak wavelengths optimization for artwork conservation	14
Laser ablation treatment of soiled featherworks: The first validation study	14
Digital fuzzy control system for monitoring environmental conditions and technical suitability of shelters at archaeological sites	14
Understanding the formation of efflorescence on beeswax models housed at the Natural History Museum of Florence	14
An experimental approach for the investigation of the performance of non-stabilized Compressed Earth Blocks (CEBs) against water-mediated weathering	13
Plasters with mixed-in crystallization inhibitors: Results of a 4-year monitoring of on-site application	13
Nanostructured metal oxide based coating for the protection and conservation of cultural heritage: A comprehensive review	13
The risk assessment of surface recession damage for architectural buildings in Italy	13
Fire-retardant and fire-resistant coatings: From industry to the potential use on cultural heritage	13
A multi-model structural analysis of the vaults of Notre-Dame de Paris Cathedral after the 2019 fire and a proposal for a hybrid model merging continuum and discrete approaches	13
Optimization of GuHCl extraction protocol on collagen-based binders in murals by response surface methodology	13
Spatial distribution characteristics and influencing factors of intangible cultural heritage in the Yellow River Basin	12
Deterioration mechanisms of archaeological wood inside the bronze parts of excavated chariots from the Western Han dynasty	12
Evaluation of mucilages efficacy in the removal of a natural adhesive (gacha) from a canvas by ATR – FTIR. First results	12
An ontology to describe the damage process to built cultural heritage triggered by earthquakes: The CHEDO model	12
Bridging technology and culture: X-ray µCT-based wood identification of Sub-Saharan African heritage	12
Spectroscopic study of mixtures of green copper pigments in fresh and aged model samples. Case studies on masterpieces from the Spanish Golden Age	12
Mourning, reconstruction, and the future after heritage catastrophes: A comparative social science perspective agenda	12
Characterisation of waterlogged archaeological wood from Nanhai No. 1 shipwreck by multidisciplinary diagnostic methods	12
Preliminary study on the strength enhancement of Klucel E with cellulose nanofibrils (CNFs) for the conservation of wooden artifacts	12
Decay products of historical cements from the Palace of Knossos, Crete, Greece	12
Deterioration mechanism and hygrothermal condition of tuff stones used for exteriors at former Koshien Hotel	11
Compact cold atmospheric pressure plasma cleaner suited for inhibiting bacterial biodeteriogens from paper archives	11
A database approach to examine the relation between function and interventions in the adaptive reuse of industrial heritage	11
Pigments, minerals, and copper-corrosion products: Terahertz continuous wave (THz-CW) spectroscopic characterization of antlerite and atacamite	11
An analytical investigation of a wooden panel painting attributed to the workshop of Lucas Cranach the Elder	11
Modelling of the deterioration and conservation costs of polychrome painted wood in two Norwegian medieval stone churches	11
Subjective Quality Evaluation of Alternative Imaging Techniques for Microfiche Digitization	11
Synthetic antioxidants as iron gall ink corrosion inhibitors in historical manuscripts	11
Convolutional neural network exploiting pixel surroundings to reveal hidden features in artwork NIR reflectograms	11
Innovative application of X-radiography in the study of daguerreotypes: Hallmarks and identification	11
Identification of stone deterioration patterns with large multimodal models. Definitions and benchmarking	10
Scan to BIM for the digital management and representation in 3D GIS environment of cultural heritage site	10
Iron(III) based Metal-Organic Frameworks in cellulose acetate film preservation: Fundamental aspects and first application	10
Numerical-experimental solar loading thermography method and chemical-physical techniques: A Tandem for the preservation of ancient books	10
A satisfaction-based model for risk indexing in cultural heritage conservation	10
Flora by Francesco Melzi from the state hermitage museum: Examination of the painting technique and materials	10
ART-RISK 3.0 a fuzzy—based platform that combine GIS and expert assessments for conservation strategies in cultural heritage	10
Green biocides for the conservation of hypogeal mural paintings raised from Western and Eastern traditions: Evaluation of interference on pigments and substrata and multifactor parameters affecting th	10
Identification of organic binding media in ancient architectural decoration by THM–Py–GC/MS	10
Learning by modelling in H-BIM environment to develop a framework for restoration. Application to the stone cladding of Casa delle Armi of Luigi W. Moretti in Rome	10
Scientific research on stained-glass windows for Notre-Dame de Paris Cathedral	10
Editorial board	10
LIBS utilization for the elemental analysis of black resin and gold used by ancient Egyptians in embalming	10
Use of bacterial cellulose in the restoration of creased Chinese Xuan paper	10
Unmixing and pigment identification using visible and short-wavelength infrared: Reflectance vs logarithm reflectance hyperspaces	10
Laser cleaning of artificially soiled cotton fabric: Assessment of surface chemical effects	10
Advanced coatings for consolidation of pottery artifacts against deterioration	10
Conserving Stone Heritage. Traditional and Innovative Materials and Techniques	10
Corroded medieval iron nail from the Studenica Monastery - Material analysis and laser cleaning	9
Understanding the Performance of Historic Masonry Structures in Mayfield, KY after the 2021 Tornadoes	9
Provenance of granitic gravestones in graveyard of feudal lords evaluated by multiple non-destructive rock analyses	9
Evaluating the integration of Thermal Quasi-Reflectography in manuscript imaging diagnostic protocols to improve non-invasive materials investigation	9
Electroosmotic permeability in kaolinite and CaCO3 poultice mixtures	9
Characterization of black crust on archaeological marble from the Library of Hadrian in Athens and inferences about contributing pollution sources	9
Structure-guided virtual restoration for defective silk cultural relics	9
Assessment of microbial communities colonizing the Azé prehistoric cave	9
Stability and durability assessment of alum-tawed skin by light transmission analysis	9
The Lord of Ucupe mask from Moche culture (Peru). A multianalytical study of the materials from the metals to the adhesive	9
Bridging the past and present: AI-driven 3D restoration of degraded artefacts for museum digital display	9
The application of polyacrylonitrile-nano silver-oregano oil electrospun fiber membrane in controlling microbial deterioration of Grotto cultural heritage	9
Is the fungus Aspergillus a threat to cultural heritage?	9
Ears of the past, an inquiry into the sonic memory of the acoustics of Notre-Dame before the fire of 2019	9
Extension study of the assessment of aqueous cleaning on nBA/MMA and EA/MMA acrylic paints	9
The Virgin Enthroned with Child: Dating, attribution, and historical reconstruction of a Flemish masterpiece	9
Digital methods and techniques for reconstructing and visualizing ancient 3D polychromy – An overview	9
Isolation of carbonatogenic bacteria for biorestoration	9
Preparation of a nano aluminum phosphate enhanced hydroxyapatite coating for marble conservation	9
‘TourGIStized’: A tool for assessing the physical impacts of overtourism on heritage areas. Its application to Seville	9
Radiocarbon dating of Kastrouli settlement: A critical assessment	9
Gelatine adhesives from mammalian and fish origins for historical art objects conservation: How do microstructural features determine physical and mechanical properties?	8
Microstructural analysis and multiscale modeling for stiffening and strengthening of consolidated earthen-site soils	8
Integrated microprofilometry and multispectral imaging for full-field analysis of ancient manuscripts	8
Existing tools enabling the implementation of EN 16883:2017 Standard to integrate conservation-compatible retrofit solutions in historic buildings	8
Assessment of consolidants for the preservation of Tituli Picti on amphorae from the Ses Fontanelles late Roman shipwreck (Mallorca, Spain): An analytical approach	8
Archaeological analysis of the voussoirs of the collapsed transverse arch of the nave: First results and new hypotheses	8
Dimensions of interoperability in BIM-supported seismic structural studies: Application to the H-BIM of the chalet of the countess of Edla in Sintra, Portugal	8
HBIM-based workflow for the integration of advanced photovoltaic systems in historical buildings	8
Automatic monitoring of the bio colonisation of historical building's facades through convolutional neural networks (CNN)	8

Complementary analysis to de-convolute co-located contaminants in marine archaeological bricks	8
A shabti of the Egyptian priest Amenmose unveiled	8
Technical study for restoration of mural paintings through the transfer of a photographic image to the vault of a church	8
AI-based experts’ knowledge visualization of cultural heritage: A case study of Terracotta Warriors	8
Successful species identification of textile and hair cultural relics from Xiaohe cemetery by DNA barcoding	8
Assessment of the effects of projected climate change on the potential risk of wood decay in Korea	8
Cationic silicone based paper impregnation agent for the protection of historical paper against fungal growth. Detection and quantification of fungi using micro-invasive fluorescence microscopy and no	8
Study on the application of laser technology in the restoring and transformation of PbS on painted cultural relics	8
Enhancing the durability of historic brick masonry: The role of diammonium phosphate and chitosan in reducing salt-induced damage	8
The potential of new eco-friendly formulations in enhancing the protection of ceramic artifacts	8
EnsArtNet: Ensemble neural network architecture for identifying art styles from paintings	8
High-resolution non-invasive X-ray diffraction analysis of artists’ paints	8
Elemental compositions of papyrus removed from ancient cartonnage reveal technology and date papyrus	7
Selective flexible sensor for monitoring volatile organic compounds in museum display cases	7
Stained glass after a disaster: Feedback and methodology	7
Comparison between nanosecond and femtosecond laser pulses for the removal of spray paint from granite surfaces	7
3D damage imaging of Carrara marble sculptures by acoustic tomography coupled to photogrammetry	7
Vitreous finds from the Iron Age archaeological complex at Bilsk (Ukraine) as evidence of trade by land and sea	7
A method to assess the hygro-mechanical behaviour of original panel paintings, through in situ non-invasive continuous monitoring, to improve their conservation: a long-term study on the Mona Lisa	7
From noise to information. Analysing macro-XRF mapping of strontium impurities in Raphael's Baglioni Entombment in the Galleria Borghese, Rome	7
Deep eutectic solvent and agar: a new green gel to remove proteinaceous-based varnishes from paintings	7
Surface characterization of Austrian daguerreotype portraits	7
Investigating the mechanisms behind long-term board-restraint procedure enhancing the mounting's dimensional stability	7
Preliminary evaluation of green terpolymer of nano poly (methyl methacrylate/dimethylaminoethyl methacrylate/acrylamide) for the consolidation of bone artifacts	7
Preserving art in historical churches: evaluating microclimate fluctuations due to visitor activity	7
Editorial Board	7
Automatic generation of synthetic heritage point clouds: Analysis and segmentation based on shape grammar for historical vaults	7
Preliminary study of the anti-corrosion performance of different protection systems applied to two World War II aluminium alloy archaeological objects with different surface finishes	7
Resilience and sustainability assessment of cultural heritage and built environment: The Libertad pedestrian walkway in Valdivia, Chile	7
Editorial Board	7
Microscopic investigation for the evaluation of atmospheric pressure non-equilibrium plasma technique used to remove contaminants from ancient Chinese murals	7
A comparison between TGA, SEM-EDX and Raman spectroscopy to assess PVC plasticizer loss	7
Erratum to ‘Territory and related artworks: Stuccoworks from the lombard lakes’ [Journal of Cultural Heritage 46 (2020) 382-398]	7
Statistical learning methods applied to stratigraphic and pottery data: An aid to establishing archaeological periodisation	7
Crafting exceptionality. Notre Dame de Paris: Between materiality and sacrality	7
Evaluation of MMI/acrylate nanocomposite with hydroxyapatite as a novel paste for gap filling of archaeological bones	7
Experimental thermo-hydric study to simulate natural weathering conditions	7
High-accuracy orientation survey in the Tiberius’ Cave near Sperlonga	7
Tales unraveled through threads: Exploring the influence of natural dyes on the carbon and nitrogen isotope ratios of wool fibers from historical rugs	7
The mysterious mould outbreak - A comprehensive fungal colonisation in a climate-controlled museum repository challenges the environmental guidelines for heritage collections	6
Historical silks: a novel method to evaluate their condition with ATR-FTIR spectroscopy and Principal Component Analysis	6
Non-destructive microwave techniques for the quantification and elimination of moisture in cultural heritage monuments	6
Analytical methodological adaptations for sampling ancient pigments in provenance research	6
Non-destructive examination of ancient vitreous materials from Southwest Asia: Synchrotron computed tomography at the BEATS beamline of SESAME	6
Identification of determinants during the registration process of industrial heritage using a regression analysis	6
Effects of iron removal treatments on the chemical and viscoelastic properties of waterlogged wood	6
A methodological case study of lead resource movements during the Warring States Period and Western Han Dynasty: Applying kernel density estimation to four lead-barium glass Bi Artifacts	6
Long-term electrochemical and biological study of archaeological iron-wood composite impregnated with 10 % PEG-200 solution	6
Identification of microorganisms harmful to human health inhabiting historical surfaces using MALDI TOF mass spectrometry and DNA sequencing and their elimination using ethanol in the mist form	6
Digitizing traditional dances under extreme clothing: The case study of Eyo	6
One-class vs binary machine learning classification of ceramic samples described by chemical element concentrations	6
A transport monitoring system for cultural relics protection based on blockchain and internet of things	6
Influence of image density and interfacial surfaces on ER-FTIR spectra of 19th century photographic print processes	6
Non-destructive testing of metal archaeological relics on the example of zinc dog tags discovered during the exhumation of people murdered in the Remand Prison at 37 Rakowiecka Street in Warsaw	6
Remains of the ancient colonnade in the archaeological site of Pompeii, Italy: vulnerability analysis and strengthening proposal	6
Evaluation of mortar mix designs for the conservation of the Acropolis monuments	6
The use of nanostructured fluids for the removal of polymer coatings from a Nuxalk monumental carving – exploring the cleaning mechanism	6
Comparison of semiquantitative methodologies using Raman mapping for corrosion products on iron artifacts	6
Intangible heritage restoration of damaged tomb murals through augmented reality technology: A case study of Zhao Yigong Tomb murals in Tang Dynasty of China	6
What kind of corrosion products are “black spots”? —Effects of reduced sulfur compounds on corrosion of bronze artefacts	6
Ancient bread recipes: Archaeometric data on charred findings	6
Analysing reds in Coptic textiles: Insights from mass spectrometry	6
ERA: A new, fast, machine learning-based software to document rock paintings	6
Coupling numerical and experimental methods to characterise the mechanical behaviour of the Mona Lisa: a method to enhance the conservation of panel paintings	6
3D imaging of the Bayeux Tapestry using photogrammetry and integration into virtual reality: Results of a feasibility test	6
Possible mechanism for explaining the concretion of unearthed silk fabrics	6