Electrochemistry

Papers
(The median citation count of Electrochemistry is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Electrochemical Evaluation of Lithium Metal Batteries Using Separators with Different Pore Sizes35
A Trifluoroacetate-based Concentrated Electrolyte for Symmetrical Aqueous Sodium-ion Battery with NASICON-type Na<sub>2</sub>VTi(PO<sub>4</sub>)<sub>3</sub> Electro27
Electrochemical Investigation of PEDOT Counter Electrode for Dye-Sensitized Solar Cells24
Development of Measurement/Analysis Techniques to Bridge Microscopic and Macroscopic Electrochemical Phenomena in Energy Storage Devices22
AC Impedance Analysis of the Degeneration and Recovery of Argyrodite Sulfide-Based Solid Electrolytes under Dry-Room-Simulated Condition20
Room-temperature Operation of Lithium Sulfide Positive and Silicon Negative Composite Electrodes Employing Oxide Solid Electrolytes for All-solid-state Battery16
Degradation Analysis of Pt/Nb–Ti<sub>4</sub>O<sub>7</sub> as PEFC Cathode Catalysts with Controlled Arc Plasma-deposited Platinum Content15
A Tuned Ether Electrolyte for Microporous Carbon-based Lithium–Sulfur Batteries Enabling Long Cycle Life and High Specific Capacity14
Electrochemical Evaluation of the Number of Viable Bacteria Using Carbon Electrode Chip14
Synthesis and Electrochemical Properties of Na<sub>2</sub>Fe<sub>0.8</sub>Mg<sub>0.15</sub>Ni<sub>0.05</sub>PO<sub>4</sub>F/C Composite as C13
Selective Stimulation of a Target Neuron in Micropatterned Neuronal Circuits Using a Pair of Needle Electrodes13
Interfacial and Internal Proton Conduction of Weak-acid Functionalized Styrene-based Copolymer with Various Carboxylic Acid Concentrations13
Susceptibility of Polycyclic Aromatic Hydrocarbons in Oxidative Voltammetry: Unveiling the Effect of Electrolyte-coordination12
Confinement Effects on the Rate Performance of Redox Active Molecules for Pseudocapacitive Flowable Electrodes11
Manganese(I) Diimine(tricarbonyl) Complexes with a Redox-active Free Catechol Unit: Redox-induced Molecular Conversion of Catechol to Quinone by Electrochemical Redox Reactions on the Complex11
Photoluminescence Redshift of AgInS<sub>2</sub> Quantum Dots by Employing Shells with Graded Composition11
Convergent Paired Electrosynthesis of β-Nitroalcohols Combining Anodic Generation of Benzaldehydes and Cathodic Formation of Nitromethyl Anion via an Electrogenerated Base11
Advances in Electric Double-Layer Capacitor Research Using X-ray Scattering Techniques10
Electrode Potentials Part 1: Fundamentals and Aqueous Systems10
Effect of Ion Mass Transfer and Electric Field Distribution on the Formation of Void Defect in Electroformed Nickel Microcolumns10
Cathodic N–O Bond Cleavage of <i>N</i>-Alkoxy Amide10
Analysis of Potential Barrier for Ionic Transport through Si<sub>3</sub>N<sub>4</sub> Nanopores9
Compensative Electrochromic Device Utilizing Electro-deposited Plasmonic Silver Nanoparticles and Manganese Oxide to Achieve Retention of Chromatic Color9
Development and Application of Semiconducting Materials with Controlled Shape and Structure9
Applications of Ni-Al Layered Double Hydroxide as Oxygen Evolution Reaction Catalysts Synthesized by Liquid Phase Deposition Process9
Surface Treatment of Boron Doped Diamond by Atmospheric-Pressure Nitrogen Plasma Jet: Effects on the Electrochemical Characteristics8
Peak Attribution of the Differential Capacity Profile of a LiCoO<sub>2</sub>-based Three-electrode Li-ion Laminate Cell8
Direct Bioelectrocatalysis via Interdomain Electron Transfer of Fungal Pyrroloquinoline Quinone-dependent Pyranose Dehydrogenase Depending on the Alkyl Chain Lengths of Self-assembled Monolayers8
Conductometric Analysis of Ion Equilibrium in Li<sup>+</sup>/F<sup>−</sup> and Mg<sup>2+</sup>/F<sup>−</sup> Hybrid Electrolyte Solutions8
Discharge Performance of the Non-rechargeable Lithium-air Batteries with a Waterproof and Breathable Film in an Open Environment8
Practical and Reliable Methanol Concentration Sensor for Direct Methanol Fuel Cells7
Effect of Crystallinity of Synthetic Graphite on Electrochemical Potassium Intercalation into Graphite7
Electrochemical Trimerization of Catechol to 2,3,6,7,10,11-Hexahydroxytriphenylene Using a Flow Microreactor7
An Artificial Insulin Receptor that Self-assembles and Works on a Gold Surface7
Development of Novel Carbon Electrode for Electrochemical Energy Storage. Nano-sized Carbon and Classic Carbon Electrodes for Capacitors7
Theoretical Consideration of Side Reactions between the VS<sub>4</sub> Electrode and Carbonate Solvents in Lithium–metal Polysulfide Batteries7
Potential Dependence of the Impedance of Solid Electrolyte Interphase in Some Electrolytes7
XAFS Analysis of Sulfuric Acid Solution Related to the Effect of Bi in Suppressing the Disproportionation Reaction of Mn<sup>3+</sup> in Mn/Ti Redox Flow Cells7
Influence of Aerogel Felt with Different Thickness on Thermal Runaway Propagation of 18650 Lithium-ion Battery6
Fundamental Studies on Electrode Reactions Involving Oxygen, Carbon, and Hydrogen for Energy and Environmental Technologies6
Reduction of Electrical Resistance of Active Materials for Lithium-ion Secondary Batteries by Making Contact with Carbon Materials6
Positive Electrode Performance of All-Solid-State Battery with Sulfide Solid Electrolyte Exposed to Low-Moisture Air6
Sodium-Ion Conducting Solid Electrolytes in the Na<sub>2</sub>S–In<sub>2</sub>S<sub>3</sub> System6
Machine Learning-based Comprehensive Survey on Lithium-rich Cathode Materials6
Development of Li<sub>10</sub>GeP<sub>2</sub>S<sub>12</sub>-type Solid Electrolytes for the Understanding of Superionic Conduction, and Their Application in All-sol6
Permeation Tendency of Rare-earth Elements through a Ni-based Alloy Diaphragm in LiCl–KCl Eutectic Melts6
Chiral Nanoporous Structures Fabricated via Plasmon-Induced Dealloying of Au-Ag Alloy Thin Films6
Nanoscale Electrochemical Surface Science on Molecular Assembly and Surface Function6
Electrochemical Sensing of Hydrogen Sulfide Traces in Biological Samples6
Combinatorial Synthesis and Ionic Conductivity of Amorphous Oxynitrides in a Pseudo-ternary Li<sub>3</sub>PO<sub>4</sub>-Li<sub>4</sub>SiO<sub>4</sub>-L6
A Sulfolane-Based Electrolyte Optimized for Microporous Activated Carbon-Sulfur Composites for Lithium Sulfur Batteries6
Development of Oxide-Type Cathode Materials towards Room-Temperature Magnesium Rechargeable Batteries5
Operando X-Ray Imaging of the Charge-Discharge Behavior of Zinc-Air Batteries5
Development and Research of Inorganic Energy Conversion Materials and Devices —The Effect of Carbonate Ions on the Ionic Conduction of B-type Carbonated Apatite—5
Optimization of Soft Carbon Negative Electrode in Sodium-Ion Batteries Using Surface-Modified Mesophase-Pitch Carbon Fibers5
Ionization Equilibrium of Water Molecule Dominated Ethanol-water Binary Solution Self-assemble5
Effects of Phase Change and Cu Doping on the Li Storage Properties of Rutile TiO<sub>2</sub>5
Multifaceted Analysis of Electrolyte Properties for Batteries5
Optimization of Carbon/Sulfur Composite and Application of Al-LLZO Solid Electrolyte and Highly Concentrated Electrolytes for Lithium-Sulfur Cell5
Developments in Bioelectrocatalysis Using Rationally Designed Enzyme Electrode Materials5
Extraordinary Capacitance and Stability of Carbon Electrode for Electrochemical Capacitors5
Cover5
Electrochemical Polarization Part 1: Fundamentals and Corrosion5
Direct Toluene Electro-hydrogenation Using Anion Exchange Membrane Electrolyzer5
A Label-free Electrochemical Immunosensor Based on Gold Nanoparticles-poly(ferriporphyrin-co-acrylamide)-reduced Graphene Oxide and the Application in Prostate Specific Antigen Detection5
Impact of pH and Composition of Phosphovanadomolybdate Anionic Catholytes on the Performance of Redox Flow Polymer Electrolyte Fuel Cells5
Electrode Behavior of Exfoliated Graphite Cathode for Aluminum Metal Anode Rechargeable Battery5
Prussian Blue Analogues Derived Hollow FeCoP Nanocubes for Electrocatalytic Overall Water Splitting5
Revisiting Delithiated Li<sub>1.2</sub>Mn<sub>0.54</sub>Ni<sub>0.13</sub>Co<sub>0.13</sub>O<sub>2</sub>: Structural Analysis and Cathode Pro5
Lithium Ion Conductivities of Solid Electrolytes Prepared by Low-temperature Heat Treatment of Amorphous Materials in the Li<sub>2</sub>O-Al<sub>2</sub>O<sub>3</sub>5
Effects of Ion Fraction in an Inorganic Ionic Liquid Electrolyte on Performance of Intermediate-Temperature Operating Sodium-Sulfur Batteries4
Fabrication of LiCoO<sub>2</sub> Composite Electrodes for All-solid-state Li Secondary Batteries via Liquid Sintering Using Porous La<sub>2/3−</sub><i><sub>x</su4
Thermal Runaway Characteristics of 18650 NCM Lithium-ion Batteries under the Different Initial Pressures4
Effect of Sn Addition on Anode Properties of SiO<i><sub>x</sub></i> in Sodium-Ion Batteries4
Oxygen-Substitution Effects on the Properties of Argyrodite-Type Sulfide Solid Electrolytes (Li<sub>5.5</sub>PS<sub>4.5−</sub><i><sub>x</sub></i>Br<s4
Measurement Methods on Electrodes and Electrocatalysts for Water Electrolysis4
Application of Diluted Electrode Method to Sodium-ion Insertion into Hard Carbon Electrode4
Gold- and Silver-Nanoparticle-Assisted Etching of p-Si and n-Si: A Discussion of Etching Behavior Based on Polarization Curves4
Properties of Carbon-coated SiO-C Pelletized Negative Electrodes for All-solid-state Batteries4
Effect of Fluorine Substitution in Li<sub>3</sub>YCl<sub>6</sub> Chloride Solid Electrolytes for All-solid-state Battery4
Theoretical Study Using First-Principles Calculations of the Electronic Structures of Magnesium Secondary Battery Cathode Materials MgCo<sub>2−</sub><i><sub>x</sub></i4
Direct Substitution of a Hydroxyl Group by a Carboxyl Group at the Benzylic Position in Benzyl Alcohols by Electrochemical Reduction in the Presence of Carbon Dioxide: Improvement Enabling Electrochem4
Quantitative Study of Solid Electrolyte Particle Dispersion and Compression Processes in All-Solid-State Batteries Using DEM4
Chemical Composition-Driven Machine Learning Models for Predicting Ionic Conductivity in Lithium-Containing Oxides4
Anion Species Dependence of Undetected Water Molecules along the Hofmeister Series in Various Lithium Electrolytes Using Near-infrared and Nuclear Magnetic Resonance Spectroscopy4
Nano-scaled Degradation Analysis of Sulfide Solid Electrolyte Around Cycled Cathode Material by STEM-EELS Technique4
Transport Properties of Electrolyte Solution Comprising LiPF<sub>6</sub>, Ethylene Carbonate, and Propylene Carbonate4
Evaluating the Rate-determining Steps of Oxygen Permeation in Ba<sub>0.5</sub>La<sub>0.5</sub>FeO<sub>3−</sub><i><sub>δ</sub></i> Perovskite4
Role of Ductile Materials in Improving Interfacial Contact Between Solid-State Electrolytes and Hard Carbon Anodes in Sodium-Ion Batteries4
Analytical Observation of Cathodic Zinc Deposition in High-Capacity Zinc Oxide Electrodes for Rechargeable Zinc-based Batteries: Influence of the Current Rate in the First Charging4
A Fast Estimation Algorithm for State of Health of Lithium-ion Battery Modules Based on Lorenz Plot4
Electrochemical Synthesis of 3,5-Bis(acyl)-1,2,4-thiadiazoles through <i>n</i>-Bu<sub>4</sub>NI-mediated Oxidative Dimerization of α-Oxothioamides4
Development of Sodium–Ion Conducting Sulfide Electrolytes4
Effects of Central Metal Ions in Porphyrin-sensitized Solar Cells with Halogen Redox Mediators4
Parameter Identification Model and Capacity Analysis of Retired Power Battery3
Regioselective Electrochemical Fluorination of Organoselenium Compounds: Further Investigation and Clarification of Reaction Mechanism3
Operating-temperature Dependence of the Average and Electronic Structures of 0.4Li<sub>2</sub>MnO<sub>3</sub>–0.6Li(Mn<sub>1/3</sub>Ni<sub>1/3</sub>Co&l3
Development of a Molecular Recognition Electrode and Investigation of a Biomolecular Application in Non-Aqueous Media —Electrochemical Detection of Uremia-Related Substances Excreted via ATP-Binding C3
3,6-Diphenyltetrazine as Cathode Active Material for Sodium Ion Batteries3
Effect of EtOMgCl Salt to Suppress Reductive Decomposition of TFSI<sup>−</sup> Anion in Electrolyte for Magnesium Rechargeable Battery3
Development of a Copper-electrodeposited Gold Electrode for an Amperometric Creatinine Sensor to Detect Creatinine in Urine without Pretreatment3
Research on PTC Auxiliary Heating Starting Strategy Based on One-dimensional Multiphase Cold Start Stack Model3
Preparation of Li<sub>4</sub>Mn<sub>5</sub>O<sub>12</sub> on Porous Li<sub>0.29</sub>La<sub>0.57</sub>TiO<sub>3</sub> via Liquid3
Cover3
Effect of Na<sub>3</sub>BO<sub>3</sub> Addition into Na<sub>3</sub>V<sub>2</sub>(PO<sub>4</sub>)<sub>3</sub> Single-Phase All-So3
Analysis of the Transport Properties of Alkaline-earth Halides MX<sub>2</sub> (M = Ca, Sr, Ba, and X = F, Cl, Br) by Simulation with a Polarizable Ion Model3
Relation between Mixing Processes and Properties of Lithium-ion Battery Electrode-slurry3
Rechargeable Lithium-Air Batteries with Practically High Energy Density3
Application of Graphene Prepared by Ultrasonic Exfoliation Method as a Conductive Additive in SiO Anodes for Lithium-Ion Batteries3
Kinetic Behavior of the Anion Intercalation/De-intercalation into the Graphite Electrode in Organic Solution3
Electrochemical Properties and Crystal and Electronic Structures of Spinel αMgCo<sub>2−</sub><i><sub>x</sub></i>Mn<i><sub>x</sub></i>O<su3
Study on Prediction Model of Performance and Degradation of LFP/Graphite Lithium-ion Battery3
Room Temperature Operation of Magnesium Rechargeable Batteries with a Hydrothermally Treated ZnMnO<sub>3</sub> Defect Spinel Cathode3
Synthesis and Lithium-ion Conductivity of Sr(La<sub>1−</sub><i><sub>x</sub></i>Li<sub>3</sub><i><sub>x</sub></i>)ScO<sub>43
Simultaneous Detection of Lead and Cadmium Ion Concentrations in Rice with Differential Pulse Voltammetry and Ionic Liquid/Reduced Graphene Oxide Composite-Modified Glassy Carbon Electrodes3
Investigating the Blocking Effect of Alkanethiol Self-assembled Monolayer on Electrochemical Response of the Split Gq-based DNA-NTs-based Biosensor3
Influence of Fluoride Ions on Electrochemical Behavior of Lanthanum and Neodymium Ions in Molten LiCl3
Preparation of LiCoO<sub>2</sub> by Molten Salts on Li<sub>0.29</sub>La<sub>0.57</sub>TiO<sub>3</sub> Solid Electrolyte and Electrochemical Performances3
Fabrication and High-temperature Electrochemical Stability of LiFePO<sub>4</sub> Cathode/Li<sub>3</sub>PO<sub>4</sub> Electrolyte Interface3
Transient Distribution of Water in an Anion Exchange Membrane Fuel Cell Monitored by Operando Coherent Anti-Stokes Raman Scattering Spectroscopy3
Comprehensive Cell Adhesion Analysis Using Electrochemiluminescence Imaging and Electrochemical Impedance Spectroscopy3
Electrodeposition of Metals and Preparation of Metal Nanoparticles in Nonaqueous Electrolytes and Their Application to Energy Devices3
Experimental Evaluation of Influence of Stress on Li Chemical Potential and Phase Equilibrium in Two-phase Battery Electrode Materials3
Impedance Analysis of the Side Reactions of Li Electrodeposition in a Quaternary Ammonium-Based Ionic Liquid Electrolyte2
Characterization of a Novel Chloride Li-ion Conductor Li<sub>2</sub>LuCl<sub>5</sub>2
Production of Titanium Films via Segregation of Ce-Ti Alloy Coexisting with LiF-based Molten Salts2
Bright Yellow Electrogenerated Chemiluminescence Cell Using a Rubrene Solution Doped with an Emitting Assist Dopant2
Electrode Applications Using Organic Thin Films with Three-Dimensional Structures2
Functional Analyses of Live-cell Membrane Proteins Using Ion-sensitive Field-effect Transistor2
Elucidation of the Electrocatalytic Function of Composite Metal Carbides Co<sub>3</sub>W<sub>3</sub>C and Co<sub>3</sub>Mo<sub>3</sub>C with Oxygen Redu2
Effect of Sn Addition on the Anode Properties of SiO<i><sub>x</sub></i> for Lithium-Ion Batteries2
Fabrications and Na<sup>+</sup> Storage Characteristics of Nitrogen-doped Biomass-derived Carbon Materials2
Phase Transition Kinetics of LiFePO<sub>4</sub> Biphasic Systems in Aqueous and Non-aqueous Electrolytes2
Mechanochemical Synthesis of K<i><sub>x</sub></i>Mn[Fe(CN)<sub>6</sub>] and CNT Composite for High-power Potassium-ion Batteries2
Systematic Investigation of Microbial Desalination Cells (MDC) Performance under the Impact of Cation Migration Behavior and Multi-cation Interactions in Industrial Wastewater2
Structural Relaxation of Li<i><sub>x</sub></i>Ni<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub> and Li<i><s2
Elucidation of Rapid Synchronization on Electric Discharge by Use of Model Cell Systems Mimicking Electric Organs of Electric Eel2
Optimization of Linear Loading Strategy for Fuel Cell Initiation Based on Gaussian Process Regression Model2
Design and Synthesis of Multilevel Structured Co<sub>3</sub>O<sub>4</sub> Double-shell Dodecahedron as Non-enzymatic Electrochemical Sensor for H<sub>2</sub>O<su2
Cycle Degradation Analysis by High Precision Coulometry for Sulfide-Based All-Solid-State Battery Cathode under Various Potentials2
Room-temperature Operation of All-solid-state Chloride-ion Battery with Perovskite-type CsSn<sub>0.95</sub>Mn<sub>0.05</sub>Cl<sub>3</sub> as a Solid Electrolyte2
XAFS Analysis of Sulfuric Acid Solution Related to the Effect of Te and Sb in Suppressing the Disproportionation Reaction of Mn<sup>3+</sup> in Mn/Ti Redox Flow Cells2
Recovery of Li, Co, Cu and Ni by Molten Salt Chlorination2
Ether Molecule Decomposition on Mg<i>M</i><sub>2</sub>O<sub>4</sub> (<i>M</i> = Mn, Fe, Co) Spinel Surface: A First-principles Study2
Prolonged Electrochemical Cycling Characteristics of ZnSiP<sub>2</sub> Prepared with Mixed Crystalline-Amorphous Domains2
Current Status and Trends of Automotive Lithium-ion Batteries2
Development of Wet Vacuum Technologies with Ionic Liquids Inspired by a Pipe Dream Discussion2
Development of Electrode Materials Based on Design Guideline of Electronic Structure Obtained by Synchrotron Radiation X-ray Analyses2
Improvement in the Electrochemical Properties of Intercalated Metal–Organic Framework Electrode Materials by Controlling Crystal Growth (Vol. 83, No. 10, 861–863)2
Dissolution Characteristics of Al-Si Alloys in AlCl<sub>3</sub>-NaCl-KCl Molten Salt at 423 K2
Electrochemical Properties of Quinone-Based Organic Electrodes in LiCl/DMSO Electrolyte Solutions for Fluorine-Free Lithium Secondary Batteries2
A Dynamic Analysis of Reversible/Irreversible Capacity Fading of Li-ion Cells Owing to Low-temperature Operation by Differential Capacity Profile2
Highly Sensitive Determination of Ammonia Nitrogen by Nanocubic Copper Prepared by Direct Electrochemical Deposition2
Oxidation Behavior of Platinum Group Alloys in Molten Glass2
Potentiometric Titration Based on the Reference Electrode Equipped with Ionic Liquid Salt Bridge — 1. Precipitation Titration of Chloride with Silver Ions in Water2
In Situ X-ray Diffraction and Crystal Orientation Analysis for Dy–Ni Electrochemical Alloying and De-alloying in Molten LiCl–KCl–DyCl<sub>3</sub>2
Electrochemical Behavior of Neptunium in NaCl–2CsCl Melt2
Lanthanide Silicide Formation on Si Electrode in LiCl–KCl Melt for Immobilization of Chloride Waste in Pyroprocessing of Nuclear Fuels2
Recent Activities for Relaunch Process of Electrochemistry to Gold Open Access Journal and Introduction of Award Winners in 20232
Formation of Porous Gold Electrodeposits by Pulse Technique in AlCl<sub>3</sub>–NaCl–KCl Molten Salt Containing AuCl2
Process Monitoring of Gold Recovery from a Thiosulfate Leaching Solution Using Silicon Powder: Measurement of Gold Potential2
Data-driven Electrochemical One-pot Synthesis of Double Hetero[7]dehydrohelicene2
Arrangement of Al Ions between Ionic Liquid and Graphite Electrode Interface by AFM Force Curve Measurement2
Effect of Starch Additive on Zinc Deposition and Dissolution Behavior in Concentrated Alkaline Aqueous Solution2
Surface Degeneration of Li<sub>3</sub>PS<sub>4</sub>–LiI Glass-Ceramic Electrolyte by Exposure to Humidity-Controlled Air and Its Recovery by Thermal Treatment2
Development of Electrodeposition Coating for SOFC Interconnector2
Phenoxyimine Ligand Molecular Structure Influence on Reversible Magnesium Electrode Reaction in a Magnesium Chloride Complex2
Next-generation Rechargeable Batteries Utilizing Ionic Liquids and Various Charge Carriers2
CO<sub>2</sub> Electrochemical Reduction with Zn-Al Layered Double Hydroxide-Loaded Gas-Diffusion Electrode2
Operando Observation of Lithiation and Delithiation Reactions of a LiCoO<sub>2</sub>-Li<sub>3</sub>BO<sub>3</sub> Composite Electrode Formed on a Li<sub>6.6&l2
Effects of Metal Composition and Preparation Process on Negative Electrode Properties and Crystal Structure of Ga-Substituted TiNb<sub>2</sub>O<sub>7</sub>2
Enhancement of Electrochemiluminescence by Au Paste Electrode for Bipolar Electroanalysis2
Effect of Electrolyte Additive on the Electrochemical Stability of Aluminum-graphite Battery2
A Diagnostic Method for a Multi-Connected PEM-type Electrolysis System by Current Sweeping2
Electrowinning of Aluminum —Challenges and Possibilities for Reducing the Carbon Footprint—2
Corrosion Behavior of E690 Steel in Tropical Marine Atmospheres Based on Electrochemical Noise Technique1
Physicochemical Properties of Bis(fluorosulfonyl)amide-Based Ionic Liquids Mixed with Mg and Sr Doped Cubic Li<sub>7</sub>La<sub>3</sub>Zr<sub>2</sub>O<sub>121
Influence of Tris(trimethylsilyl)phosphite Additive on the Electrochemical Performance of Lithium-ion Batteries Using Thin-film Ni-rich Cathodes1
The Effect of Supply Rate of Li Ion and Anion on Li Dissolution/Deposition Behavior in LiNO<sub>3</sub> Electrolyte Solutions for Li-Air Batteries1
Surface pH Effects on Catalytic Behavior of Pyridinic Nitrogen on Nitrogen-doped Carbon Nanotube in CO<sub>2</sub> Electrochemical Reduction1
Migration Effects Cause Linear Waveform in Cyclic Voltammetry of Metal Anode Electrodeposition/Dissolution without Supporting Electrolyte: Calculations and Experiments on a Model Case1
Verification of Peak Attribution in Differential Capacity Profile by Varying the Electrode Capacity Balance in Three-electrode Li-ion Laminate Cells1
Kurtosis-Based State of Health Prediction of Lithium-Ion Batteries Using Probability Density Function1
Electrode Nanopatterning for Bioelectroanalysis and Bioelectrocatalysis1
One-Step Electrodeposition of Chiral Plasmonic Gold Nanostructures for Enantioselective Sensing1
Bipolar Electrochemical Fluorination of Triphenylmethane and Bis(phenylthio)diphenylmethane Derivatives in a U-shaped Cell1
Quantitative Assessment for the Disproportionation Reaction of HCHO Formed during CO and CO<sub>2</sub> Electrolysis1
Structural Control of PtNi Catalysts through Precise Synthesis Conditions and Elucidation of Property Determinants by <i>Operando</i> XAS Analysis1
Streaming Potential Boosted Efficient Hydrogen Production by Microfluidic Electrochemical Systems1
Observation of In-Situ Formed Electrolyte from TiH<sub>2</sub> by SEM and Windowless EDS1
Improvement of ORR Activity of Monoclinic Zirconium Oxides by Fe and F Co-addition for PEFC Cathodes1
Enhanced Electrochemical Performances of Ni-rich Cathode Materials for Lithium Ion Batteries by Mixed Coating Layers1
Investigation on Pesudocapacitance Mechanism of Magnéli Oxide Ti<sub>4</sub>O<sub>7</sub> in Aqueous Electrolyte1
NASICON-type Li<sub>1.5</sub>Al<sub>0.5</sub>Ge<sub>1.5</sub>(PO<sub>4</sub>)<sub>3</sub> Containing Amorphous Phase for Solid Li-Ion Conduc1
Electrochemical Formation of Si Films by Co-deposition of Si and Zn in Molten KF–KCl–K<sub>2</sub>SiF<sub>6</sub>–ZnCl<sub>2</sub> Systems1
Effects of Degradation on the Thermal Stability LiNi<sub>0.8</sub>Co<sub>0.1</sub>Mn<sub>0.1</sub>O<sub>2</sub>/Graphite Batteries1
Novel Hierarchical Porous Carbon for Fabrications of Ru/NHPC Catalysts with the High Hydrogen Evolution Reaction Performance1
Multiple Knee Points in the Degradation of a Commercial Lithium-ion Battery: A Case Study of the NCM/Graphite System1
Spectroelectrochemical Study of Violurates Using Optically-transparent Thin-layer Electrochemical Method1
Cyclic Voltammetry Part 2: Surface Adsorption, Electric Double Layer, and Diffusion Layer1
Electrochemical Properties of Cs and La Co-doped CaWO<sub>4</sub> Oxide Ion Conductor1
Application of Boron-doped Diamond Electrodes: Focusing on the Electrochemical Reduction of Carbon Dioxide1
Sequential Injection Analysis of Butyrylcholinesterase Using Butyrylcholine Ion-Selective Electrode Detector1
Ionic Conduction and Electric Modulus in Li<sub>2</sub>S–CaS and Ca<i>X</i><sub>2</sub> (<i>X</i> = F, Cl, Br, and I) Nanocomposites1
Performance of a Fe-N-C Catalyst in Single-chamber MFC Air-cathode at Neutral Media1
Stable Lithium Metal Plating/Stripping in a Localized High-Concentration Cyclic Carbonate-Based Electrolyte1
Kinetic Analysis of Oxygen Reduction Reaction for Electrodeposition of ZnO Thin Films1
Cobalt Electroplating in Choline Chloride-ethylene Glycol: A Comparative Study1
Efficient Red Phosphorescent Electrogenerated Chemiluminescence Cell Based on a Combination of an Iridium Complex and a Carbazolyl Dicyanobenzene Derivative1
Performance Stabilization of Lithium-Sulfur Batteries Containing Sulfolane-based Electrolyte and Microporous Cathode by Controlling Working Voltage Range1
Development of Lithium Ion Conducting Liquid: Methylurea-Based Eutectic Electrolytes for Lithium Batteries1
Solid–Liquid Interfacial Properties Related to Ionic Conductivity of Mixtures of Metal Oxide Particles and Lithium Bis(fluorosulfonyl)amide-Sulfone Electrolytes1
Electrochemical Impedance Spectroscopy Part 1: Fundamentals1
Origin of the Adsorption-Controlled Redox Behavior of Quinone-Based Molecules: Importance of the Micropore Width1
Bi-functional Oxygen Electrocatalysts Using Mixed-Metal Tungsten-Nitrides in Alkaline Media1
Cover11
Elucidation of Side Reactions in Lithium-ion Batteries with Electrolyte Decomposition Products via Overdischarge for Li[Li<sub>1/3</sub>Ti<sub>5/3</sub>]O<sub>4</sub&g1
Rubber-Derived Sulfur Composite as a High Capacity Anode for Li-ion Battery Using 5 V-Class LiNi<sub>0.5</sub>Mn<sub>1.5</sub>O<sub>4</sub> Cathode1
Water Transport Analysis in a Polymer Electrolyte Electrolysis Cell Comprised of Gas/Liquid Separating Interdigitated Flow Fields1
Amorphous Li<sub>2</sub>O–LiI Solid Electrolytes Compatible to Li Metal1
Effect of Tin Ion on Electrodeposition Behavior of Indium1
Black Phosphorus-Graphite Material Composites with a Low Activation Energy of Interfacial Conductivity1
Single-step Synthesis of Highly Porous Nitrogen-doped Carbon by Solid–gas Mechanochemical Treatment as an Oxygen Reduction Electrocatalyst1
Polymer Pre-treatment for Magnesium Electrode: Effects on Electrochemical Phosphate Recovery1
Effect of Surface Structure of Graphite on the Passivation Ability of Solid Electrolyte Interphases1
Electrochemical Performance of Nanorod-like (La, Zr) Co-Doped Li-rich Li<sub>1.2</sub>Ni<sub>0.2</sub>Mn<sub>0.6</sub>O<sub>2</sub> Cathodes for Use in 1
Preparation of LiNiO<sub>2</sub> Using Fluorine-modified NiO and Its Charge-discharge Properties1
Three Dimensional Structure Optimization of Proton Exchange Membrane Fuel Cell with Radial Flow Field Based on Topology Optimization1
Electrochemical In Situ/<i>operando</i> Spectroscopy and Microscopy Part 2: Battery Applications1
History of ECSJ Journal Series and Introduction of Award Winners in 20221
Branched Alkyl Functionalization of Imidazolium-based Ionic Liquids for Lithium Secondary Batteries1
The Corrosion Behavior of As-cast Mg–4Al–<i>x</i>Er–0.3Mn Alloys1
Interdigitated Microarray Electrodes Based on Boron-doped Amorphous Carbon for Highly Sensitive Electroanalysis of Redox Analytes Having a Higher Standard Potential1
Addition of Na<sub>3</sub>PO<sub>4</sub> for Enhanced Positive Electrode Performance in All-Solid-State Sodium Batteries1
Electrochemical Characteristics of Micrometer-sized Sn and Acetylene Black Composites Prepared by Mechanical Milling for Sodium-ion Battery Anodes1
Predictive Zeta Potential Measurement Method Applicable to Nonaqueous Solvents in High-concentration Dispersion Systems for the System of LiClO<sub>4</sub>–Propylene Carbonate Solution and1
Development of Iridium Clusters-Loaded Tungsten Disulfide Composite Catalyst with Poisoning Tolerance for Electrochemical Ammonia Oxidation1
Improved Electrode Reversibility of Nanosized Li<sub>1.15</sub>Nb<sub>0.15</sub>Mn<sub>0.7</sub>O<sub>2</sub> through Li<sub>3</sub>PO<su1
Electrochemical Synthesis of Dibenzothiophene <i>S</i>,<i>S</i>-Dioxides from Biaryl Sulfonyl Hydrazides1
Low-Temperature Flow Electrolysis for Efficient Trichloromethylation Aided by Electrogenerated Base1
Photoelectrochemical Activity of TiO<sub>2</sub>/MWCNT Thin-Film Electrodes with Different Film Structures Prepared by Combining Electrophoretic Deposition and Sol–Gel Method1
Electrochemical Cyanation of Benzothiazole Derivatives1
β-Scission by Direct Electrochemical Oxidation: Proton-coupled Electron Transfer Mechanism Dictated by Synthetic Study and Computations1
Three-Dimensional Numerical Modeling of a Low-Temperature Sabatier Reactor for a Tandem System of CO<sub>2</sub> Methanation and Polymer Electrolyte Membrane Water Electrolysis1
Sputter Deposited Nanocarbon Film Electrodes for Electrochemical Analysis of Biomolecules1
Solution Processing of Functional Thin Films and Their Device Applications1
Properties of Carbon-coated SiO-C Negative Electrodes for Sulfide-type All-solid-state Batteries1
Performance of Copper Corrosion Inhibitors on Pipecoridithiocarbamic Acid in 3 wt% NaCl Solution1
C–C Bond Cleavage at the <i>N</i>-α Position Enabled by the Low-potential Electrochemical Oxidation of the 2,7-Dimethoxynaphthyl Electroauxiliary1
LiBr-coated Air Electrodes for Li-air Batteries1
0.2635350227356