OOIR: Observatory of International Research

Papers

(The TQCC of Journal of Advanced Concrete Technology is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)

Article	Citations
Terahertz (THz) Wave Imaging in Civil Engineering to Assess Self-Healing of Fiber-Reinforced Cementitious Composites (FRCC)	35
Simplified Three-Parameter Kinematic Theory for Shear Strength of Short Reinforced Concrete Walls	32
Modelling Concrete Degradation by Coupled Non-linear Processes	26
Low-Level Radioactive Waste Disposal in Japan and Role of Cementitious Materials	19
Synergising expertise towards sustainability and robustness of cement-based materials and concrete structures	17
Influence of Rebar Strength, Pre-treatment, and Measurement Method on Residual Stress Measurement using Portable X-ray Diffractometer	17
Probing the Effects of Density on Combustion Performance of Cement-bonded Particleboard Produced from Wood Processing Residues	17
Modification of Concrete Mix Design with Crystalline Admixture for Self-healing Improvement	16
A New Concept of Calcium Carbonate Concrete using Demolished Concrete and CO<sub>2</sub>	16
Stress Self-sensitivity of Carbon Black-filled Mortar under Nondestructive Compression and the Effects of Electric Circuit and Specimen Dimensions	13
Probabilistic Service Life Prediction of Alkali Activated Concretes Exposed to Chloride Induced Corrosion	12
Development of a Large-scale Thermogravimetry and Gas Analyzer for Determining Carbon in Concrete	12
Cold-sintered Carbonated Concrete Waste Fines: A Calcium Carbonate Concrete Block	12
Mechanical Properties of Hybrid Fiber Recycled Concrete under Cyclic Compression	11
Quantification of CO<sub>2</sub> in Cement Pastes with Different Degrees of Carbonation	11
Effects of Severe Accident Conditions on Integrity of RPV Pedestal of Fukushima Daiichi Nuclear Power Plant	11
An Adaptive Homogenization Scheme for Modeling the Effective Elastic Properties of Early Age Concrete	10
Investigation on Preparation and Application in Concrete of Physically Modified Fly Ash	10
Punching Shear Capacity of Prestressed Concrete Slabs Made of Lightweight Concrete Mixed with Short Fibers	10
Bond Strength of Post-installed Anchor Adhering to Damaged Concrete by Freeze-thaw Action	10
Influence of Transverse Sectional Pre-crack on Shear Failure Behavior of RC Slender Beams Based on Experimental Loading Test	10
Derivation of the True Strain Rate Effect of Roller Compacted Concrete (RCC) from Impact-Induced Fragmentation	10
In-Situ Deep-Sea Monitoring of Cement Mortar Specimen at a Depth of 3515 m and Changes in Mechanical Properties after Exposure to Deep Sea Condition	9
Crack Resistance under Compressive Stress of Concrete Made Using Granulated Blast-furnace Slag Sand	9
Evaluation of Applicability of FRTP to Rebar in Concrete	9

Tests and Design of Welded-bar Angle Connections of Precast Floor Elements	9
Application of the German Standardization Approach for the Reliability Assessment of NDT – Honeycomb Detection in Concrete using Ultrasonic Testing	9
Effect of Seawater and Various Parameters on Electro-deposition Repairing Cracks of Reinforced Concrete Exposed to Marine Environment	9
Characterisation of “One-part” Ambient Cured Engineered Geopolymer Composites	8
Flexural Behavior of Fiber-Reinforced SCC for Monolithic and Composite Beams	8
Shear Behaviour of Full-Scale Squat Shear Walls with and without Precast Pre-walls	8
Performance of Superplasticizers in Alkaline Environment of Self Compacting Geopolymer Mortar	8
Quasi-static and Dynamic Mechanical Properties of Engineered Geopolymer Composites with Hybrid PVA and Recycled Steel Fibres	8
Recycled Aggregate Concrete with Industrially Pre-carbonated Recycled Concrete Aggregates and Low Clinker Content	8
Estimation of Corrosion Risk Using Concrete Electrical Resistivity Model	8
Properties and Reaction Mechanism of Light-burned Magnesia-based Magnesium Phosphate Cement at Varied Mass Ratio of K<sub>3</sub>PO<sub>4</sub> and KH<sub>2</sub>PO	7
Numerical Simulation of Dimensional Stability of Precast Segments Exposed to Solar Radiation During Yard Storage	7
Optimisation and Prediction of Fresh Ultra-High-Performance Concrete Properties Enhanced with Nanosilica	7
Non-Destructive Evaluation of Concrete in Nuclear Applications	7
Stress Development and Crack Monitoring of Massive Concrete Walls with Embedded Air-cooling Pipes	7
Flexural Analysis Combined with Freeze-thaw Depth for Reinforced Concrete Beams and Columns	7
Experimental and Numerical Study of Early-age Cracking of Concrete Slabs Reinforced with Steel and GFRP Bars	7
Performance of Polypropylene Fiber Reinforced GGBFS-based Alkali Activated Composite under Elevated Temperatures	7
Extended Multi-directional Crack Model Applied to the RC Precast Joint Interface with Shear Dowel	7
A Micromechanics-based Study on Cracking Characteristics of Engineered Geopolymer Composite	7
A Pointwise Model Based on a Total Strain Approach to Simulate Long-term Concrete Behaviour	7
General Overview of the Research Project Investigating the Radionuclide Solution Behavior in Mock Mortar Matrix Modeled after Conditions at the Fukushima-Daiichi Nuclear Power Station	7
Effect of Water Reducing Agent and Retarder on Properties of Ternesite-Calcium Sulfoaluminate Cement Synthesized at Low Temperatures	7
Effect of Rib Spatial Distribution on Bond Behavior between Steel and Concrete using 3D Meso-scale Model	6
Aging Management of Concrete Structures in Nuclear Power Plants (Part II)	6
Effects of the Mineral Composition of Cement on the Temperature Dependency of Strength Development	6
Review of Performance Assessment for Engineered Barrier Systems to Support Future RD&D of Radioactive Waste Management in Japan	6
Simulation of Concrete Pumped in Horizontal Coil and Super High-Rise Building Based on CFD	6
Compressive Strength and Hydration Products of Oil Well Cement Mixed with Fly Ash at Ultra-high Temperature	6
Cyclic Behavior of Steel-Concrete Composite Dowel by Clothoid-Shaped Shear Connectors under Fully Reversed Cyclic Stress	6
Electrical Monitoring of Setting and Hardening of UHPC/UHPFRC with Graphene	6
Extraction of Carbonation Rate from Depth Profile of Concrete Carbonation by using Pseudo-analytical Solution of Two-component Reaction-diffusion Equation	6
Incineration Bottom Ash as Aggregate for Controlled Low Strength Materials: Implications and Coping Strategies	5
Development of Mesoscale Simulation Approach of Concrete Material and Structural Behavior with Physical Damages with RBSM	5
Impact Resistance of Engineered Cementitious Composites Reinforced with Hybrid Fibers	5
Safety Function of Cementitious Materials and the Analytical Assessment of Long-Term Evolution of Cement-Bentonite Interface for Geological Disposal in Japan	5
How to Measure the Absorption and Desorption Curves of Superabsorbent Polymers in the Presence of Calcium Ions	5
Hardened Mechanical Properties of Self Compacting Geopolymer Mortar	5
Experimental and Analytical Performance of Recycled Aggregates Produced by Customized Chemical-Mechanical Treatment	5
Abrasion Resistance Improvement of Recycled Aggregate Pervious Concrete with Granulated Blast Furnace Slag and Copper Slag	5
Using GGBS: Clarification of the Importance of Relative Humidity at Storage on Reactivity of GGBS	5
Thermal Expansion of Cement Paste at Various Relative Humidities after Long-term Drying: Experiments and Modeling	5