Medical Engineering & Physics

Article	Citations
Novel 3D-printed foot orthoses with variable hardness: A comfort comparison to traditional orthoses	122
Experimental and numerical assessment of two reconstructive techniques for the fragility fractures of the pelvis type Ia	49
On the relation between tidal and forced spirometry	49
Magnetism-enhanced biomaterial Mg guide wire by MAP process for development of catheter insertion	46
Drug injection and dispersion characteristics of an air-powered needle-free injector	45
Letter to the editor	44
Computer simulation of low-power and long-duration bipolar radiofrequency ablation under various baseline impedances	36
Functional brain response pattern under rubber hand illusion based on fNIRS	34
Breast cancer histopathology image classification using transformer with discrete wavelet transform	33
Does bone penetration of cement differ by cement type and application time-point?	33
Musculoskeletal Injury Recovery Assessment using Gait Analysis with Ground Reaction Force Sensor	31
Experimental investigation of the optimal driving pressure for a larger-volume controllable jet injection system	29
Numerical analysis of oxygen uptake processes by red blood cells in stopped-flow measurements: Effects of cell shape, membrane permeability and unstirred layer	28
Numerical simulation of the vascular structure dependence of blood flow in the kidney	28
MR-based quantitative measurement of human soft tissue internal strains for pressure ulcer prevention	28
Comparison of wear on articular cartilage by titanium alloy, ultra-high-molecular-weight polyethylene, and carbon fibre reinforced polyether-ether-ketone: A pilot study	26
Semi-supervised medical image segmentation with dual-branch mixup-decoupling confidence training	24
EEG-explained cortical correlates of transfemoral amputees during balancing with vibrotactile feedback: A pilot study	23
ECG arrhythmia detection in an inter-patient setting using Fourier decomposition and machine learning	23
Membrane capacitance and characteristic frequency are associated with contractile properties of skeletal muscle	23
Computer assisted identification of stress, anxiety, depression (SAD) in students: A state-of-the-art review	23
Prediction of temperature elevation in rotary ultrasonic bone drilling using machine learning models: An in-vitro experimental study	21
A hybrid orthosis combining functional electrical stimulation and soft robotics for improved assistance of drop-foot	21
Effects of wall compliance on pulsatile flow in a full-scale, patient-specific cerebral aneurysm model: Particle image velocimetry experiments	20
Comparison of the biomechanical effects of lumbar disc degeneration on normal patients and osteoporotic patients: A finite element analysis	20

Simulation study on parameter dependence of dynamic osteocyte response under low-magnitude high-frequency vibration	20
A geometry-based finite element tool for evaluating mitral valve biomechanics	19
Letter to the editor in response to: Biomechanical evaluation for bone arthrosis morphology based on reconstructed dynamic kinesiology	19
A Simulation Study of the Effects of His Bundle Pacing in Left Bundle Branch Block	18
Effective cardiac disease classification using FS-XGB and GWO approach	18
A robust technique for optimal fitting of roll-over shapes of human locomotor systems	18
An innovative method for trans-impedance matrix interpretation in hearing pathologies discrimination	18
Biomechanical analysis of the novel S-type dynamic cage by implementation of teaching learning based optimization algorithm - An experimental and finite element study	17
Evaluation of flow field in the anterior segment during irrigation and aspiration in cataract surgery with three-dimensional computational simulation	17
Accuracy of radiostereometric analysis using a motorized Roentgen system in a pilot study for clinical simulation	17
A novel combined deep learning methodology to non-invasively estimate hemoglobin levels in blood with high accuracy	17
Design of a low-power gradient amplifier for benchtop nuclear magnetic resonance spectrometer	16
Evaluation of transjugular intrahepatic portosystemic shunt and modified sclerotherapy in preventing rebleeding of esophageal and gastric varices	16
3D reconstruction of the scapula from biplanar X-rays for pose estimation and morphological analysis	16
Corrigendum to ‘Foot trajectories and loading rates in a transfemoral amputee for six different commercial prosthetic knees: An indication of adaptability’[Medical Engineering and Physics, Volume 68,	16
Maximum abdominal excursion assessment using an abdominal excursion measuring device: Reliability and validity of a new device for simple and quantitative assessment of respiratory function	16
Synergistic dual-nanostructure antibacterial-antifouling coating for tracheostomy tubes to reduce ventilator-associated pneumonia	16
Critical loss of primary implant stability in osteosynthesis locking screws under cyclic overloading	16
Patient-specific arterial wall generation for intracranial aneurysms with a variable and a near realistic vessel wall thickness for FSI studies	15
Validation of marker-based tracking with a biplanar fluoroscopy system optimized for the foot and ankle	15
A fast permutation entropy for pulse rate variability online analysis with one-sample recursion	15
Towards a reduced order model for EVAR planning and intra-operative navigation	15
Free-hand 3D ultrasound imaging for vascular access	14
Accuracy of instrument tip position using fiber optic shape sensing for navigated bronchoscopy	14
Optimal configurations of an electromagnetic tracking system for 3D ultrasound imaging of pediatric hips – A phantom study	14
A 3D multi-modal multi-scale end-to-end classifier for Alzheimer's disease diagnosis	13
Surgical treatment of small recurrent gliomas based on MR imaging examination	13
A mechanics-based model for predicting flexible needle bending with large curvature in soft tissue	13
Corrigendum to ‘Biomechanics of first ray hypermobility: An investigation on joint force during walking using finite element analysis’. [Med. Eng. Phys. 36(2014) 1388–1393]	13
Mechanical load applied by Intraosseous Transcutaneous Amputation Prosthesis (ITAP) during walking on level and sloped treadmill: A case study	12
A biomechanical analysis of skiing-related anterior cruciate ligament injuries based on biomedical imaging technology	12
Smartphone generated electrical fields induce axon regrowth within microchannels following injury	12
Development and validation of a device to measure the force applied to the coxofemoral joint during stress radiography for early diagnosis of canine hip dysplasia	12
Functional quality assessment of whole-body vibration training devices based on instantaneous amplitude and frequency of photogrammetric vibration measurements	12
Letter to the editor	11
Image testing based on biomedical drug loading in cardiovascular drug care simulation for coronary heart disease	11
Effects of miniscrew location on biomechanical performances of bone-borne rapid palatal expander to midpalatal suture: A finite element study	11
Anatomic ankle implant can provide better tibiotalar joint kinematics and loading	11
Towards the 2D velocity reconstruction in abdominal aorta from Color-Doppler Ultrasound	11
Evaluation of a method to quantify posture and scapula position using biplanar radiography	11
Relation between mechanical and densimetric properties to fractal dimension in human rib cortical bone	11
Spine slenderness is not an early sign of progression in adolescent idiopathic scoliosis	11
A long short-term memory modeling-based compensation method for muscle synergy	10
Exploring the bioactivity of reduced graphene oxide and TiO2 nanocomposite for the regenerative medicinal applications	10
Accuracy tradeoffs between individual bone and joint-level statistical shape models of knee morphology	10
How well does intra-operative contact path predict post-operative contact path during activities of daily living after medial unicompartmental knee arthroplasty?	10
Integrating movement analysis and cardiorespiratory assessment in smart electrically assisted bicycle sessions- Proof of concept -	10
Combining robotics and functional electrical stimulation for assist-as-needed support of leg movements in stroke patients: A feasibility study	10
Heart rate estimation for U-Net and LSTM models combining multiple attention mechanisms	10
Image quality and diagnostic accuracy of different dosages of iodixanol in computed tomography angiography and perfusion of overweight patients with coronary artery stenosis: A feasibility study	10

Non-uniform assignment method for skeletal materials based on slope difference distribution and experimental validation	10
In-vitro viability of laser cladded Fe-based metallic glass as a promising bioactive material for improved osseointegration of orthopedic implants	10
Aging-related structural change in 3D extracellular matrix affects its mechanics	10
Acknowledgement to Reviewers 2023	9
An in vitro experimental study on the synergistic pathogenicity analysis of pulsatile tinnitus involving venous flow velocity, sigmoid sinus wall dehiscence and sinus malformation	9
Mixture density knowledge distillation in super-resolution reconstruction of mri medical images	9
Utilization of skin color change for image-based tactile sensing	9
A compact and cost-effective gait simulator to advance prosthesis development with reduced reliance on human subject testing: Development, validation and application	9
Design and validation of a pediatric gait assistance exoskeleton system with fast non-singular terminal sliding mode controller	9
Assessment of pre- and post-operative gait dynamics in total knee arthroplasty by a wearable capture system	9
Genetic algorithm based ensemble system using MLR and MsetCCA methods for SSVEP frequency recognition	9
Comparison of electromyography, sound, bioimpedance, and high-resolution manometry for differentiating swallowing and vocalization events	9
Reliability of ultrasound to measure the distance between lumbar interspinous processes	9
Electrical pulse generator for electroporation induction in myocytes: Compared effects on skeletal and cardiac cells	9
A novel STA-EEGNet combined with channel selection for classification of EEG evoked in 2D and 3D virtual reality	9
Influence of surface type on outdoor gait parameters measured using an In-Shoe Motion Sensor System	9
Computing intracoronary blood flow rate under incomplete boundary conditions: Combing coronary anatomy and fractional flow reserve	9
The effect of existing and novel walker boot designs on offloading and gait mechanics	9
Investigating the course and predictors of desire to void based on heart rate variability	9
Development of a mechanical characterisation device for intracranial aneurysms: Calibration on polymeric phantom arteries	9
A finite element model to simulate intraoperative fractures in cementless hip stem designs	9
Blinded prediction of custom-made pelvic implant failure using patient-specific finite element modeling	9
Research on heart rate extraction method based on mobile phone video	9
Development, calibration and validation of a comprehensive customizable lumbar spine FE model for simulating fusion constructs	8
Development and validation of 3D printed anthropomorphic head phantom with eccentric holes for medical LINAC quality assurance testing in stereotactic radiosurgery	8
Efficient feature selection based novel clinical decision support system for glaucoma prediction from retinal fundus images	8
Strain based in vitro analysis of dental implant using artificial bone model and validation by numerical technique	8
Methodology to identify subject-specific dynamic laxity tests to stretch individual parts of knee ligaments	8
Physiological consequences of half-embedded drug-eluting stent on coronary drug-transport: A two-species drug delivery simulation	8
Active constraint control for the surgical robotic platform with concentric connector joints	8
Modeling and experimental study of the intervention forces between the guidewire and blood vessels	8
Surgical technique and implant design affect abduction kinematics and functional outcomes after reverse shoulder arthroplasty	8
A digital process to replicate the socket-foot alignment in below-knee running specific prostheses	8
An explainable machine learning framework for predicting driving states using electroencephalogram	8
Test-retest reliability of non-invasive P2/P1 ratio and time to peak at rest and during isometric handgrip stress	8
Estimation of critical closing pressure using intravascular blood pressure of the common carotid artery	8
An application based on the analysis of thermograms to calculate the thermographic index for pain and swelling assessment	8
Hybrid artificial intelligence approaches and bioimpedance spectroscopy for classifying pancreatic disease	8
Experimental studies on penetration process of high-speed water-jet into ballistic gelatin	8
Biomechanical properties of artificial bones made by Sawbones: A review	8
Modelling and numerical solution of variable orifice flow meter for application of respiratory	8
Comparison of CT noise reduction performances with deep learning-based, conventional, and combined denoising algorithms	8
Study on the properties of capsule shell prepared by multi-type HPMC mixed system	8
Fundus image based diabetic retinopathy detection using EfficientNetB3 with squeeze and excitation block	8
Characterization of the ankle dynamic joint stiffness as a function of gait speed for overground and treadmill walking	8
Reproducibility of dynamometers in handrail format in evaluating handgrip strength and traction in young and older adults	8
Combining algorithms for the automated detection of auditory brainstem responses in newborns	8
Cyclic socket enlargement and reduction during walking to minimize limb fluid volume loss in transtibial prosthesis users	8
Accuracy evaluation of 3D-printed noninvasive adhesive marker for dynamic navigation implant surgery in a maxillary edentulous model: An in vitro study	8
3D bioheat transfer mapping reveals nanomagnetic particles effectiveness in radiofrequency hyperthermia breast cancer treatment comparing to experimental study	8
Publisher’s Note	7
Short-term efficacy, safety and survival of laparoscopic radical resection for colorectal cancer patients with bowel obstruction	7
Posture prediction models in digital human modeling for ergonomic design: A systematic review	7
Improvement of postural control in the frail older adults through foot care: A pre- and post-intervention study	7
Effects of injection rates and tissue diffusivity in magnetic nano-particle hyperthermia	7
A wireless intraoperative joint force sensing system for total hip arthroplasty	7
Effects of movement direction and limb dominance on ankle muscular force in sidestep cutting	7
BAEN-SKCNN: A novel framework for scoliosis early screening and severity diagnosis using unclothed back images	7
Mechanical characterization of human skin—A non-invasive digital twin approach using vibration-response integrated with numerical methods	7
Predicting spatio-temporal radiofrequency ablation temperature using deep neural networks	7
Does interpolation and intra-user variability affect the accuracy of arthrokinematic measurements in the knee? A dual fluoroscopic imaging and model-based tracking study	7
In vivo biomechanical dynamic simulation of a healthy knee during the single-leg lunge and its experiment validation	7
Simulation of cancer progression in bone by a virtual thermal flux with a case study on lumbar vertebrae with multiple myeloma	7
Methodology to identify optimal subject-specific laxity tests to stretch individual parts of knee ligaments	7
The influence of blood velocity and vessel geometric parameters on wall shear stress	7
ExoMechHand prototype development and testing with EMG signals for hand rehabilitation	7
Feature evaluation for myoelectric pattern recognition of multiple nearby reaching targets	7
Evaluation of a finite state machine algorithm to measure stepping with ankle accelerometry: Performance across a range of gait speeds, tasks, and individual walking ability	7
Comparing fluid dynamics of newborn and adult centrifugal pumps in cardiopulmonary bypass procedures	7
3D quasi-automatic spine length assessment using low dose biplanar radiography after surgical correction in thoracic idiopathic scoliosis	7
Weighted combination and singular spectrum analysis based remote photoplethysmography pulse extraction in low-light environments	7
Medical devices: Materials, mechanics, and manufacturing	7
Nonlinear analysis of dynamic stability in walking with toe-only rocker sole shoes in elderly	7
A phased array ultrasound system with a robotic arm for neuromodulation	7
Fetal magnetocardiographic recordings with a prototype bed-based array system of optically-pumped magnetometers	7
Tumor size dependent MNP dose evaluation in realistic breast tumor models for effective magnetic hyperthermia	7
Merging mixed reality and computational modeling for enhanced visualization of cardiac biomechanics	7
IJES-OA Net: A residual neural network to classify knee osteoarthritis from radiographic images based on the edges of the intra-joint spaces	7
A phantom study: Evaluation of a novel three-lumen balloon catheter for potential treatment of intractable limb ischemia	6
A novel method for estimating sternoclavicular posterior rotation with promising accuracy: A validity comparison with minimizing acromioclavicular rotation approach	6

Predicting ground reaction forces and center of pressures from kinematic data in crutch gait based on LSTM	6
Kinematics modelling and dynamics analysis of an SMA-actuated active flexible needle for feedback-controlled manipulation in phantom	6
Dosimetric benefits and preclinical performance of steerable needles in HDR prostate brachytherapy	6
A comparative analysis of Constant-Q Transform, gammatonegram, and Mel-spectrogram techniques for AI-aided cardiac diagnostics	6
Establishing error bounds for internal calibration of quantitative computed tomography	6
A coronary atherectomy system with a novel burr design for two-phase operation	6
Patient's airway monitoring during cardiopulmonary resuscitation using deep networks	6
Design and development of a novel double-chamber syringe concept for venous catheterization	6
An enhanced UHMWPE wear particle detection approach based on YOLOv9	6
Development of a peak insertion torque prediction model for parallel-walled dental implants	6
The clinical applicability of sensor technology with body position detection to combat pressure ulcers in bedridden patients	6
Decoding finger movement patterns from microscopic neural drive information based on deep learning	6
Implications of using simplified finite element meshes to identify material parameters of articular cartilage	6
Computational fluid dynamics analysis of the fluid environment of 3D printed gradient structure in interfacial tissue engineering	6
Automatically predicting lung tumor invasiveness using deep neural networks	6
EMG optimization in OpenSim: A model for estimating lower back kinetics in gait	6
Automated digital templating of component sizing is accurate in robotic total hip arthroplasty when compared to predicate software	6
Patient-specific computational haemodynamics associated with the surgical creation of an arteriovenous fistula	6
A cascade approach for the early detection and localization of myocardial infarction in 2D-echocardiography	6
Peak counting in surface electromyography signals for quantification of muscle fatigue during dynamic contractions	6
Aided diagnosis of cervical spondylotic myelopathy using deep learning methods based on electroencephalography	6
The sensitivity of an anatomical coordinate system to anatomical variation and its effect on the description of knee kinematics as obtained from dynamic CT imaging.	6
Using an instrumented hammer during Summers osteotomy: an animal model	6
Thermal finite element analysis of localized hypothermia treatment of the human eye	6
Fast diagnostic of osteoporosis based on hair analysis using LIBS technique	6
Flows of healthy and hardened RBC suspensions through a micropillar array	5
Efficiency of tungsten-polymer composite shields on fetal dose reduction in chest CT scans	5
A novel ECG-based approach for classifying psychiatric disorders: Leveraging wavelet scattering networks	5
Revolutionizing motor dysfunction treatment: A novel closed-loop electrical stimulator guided by multiple motor tasks with predictive control	5
Low-cost graphite and double-gate FET-based label-free biosensor for dopamine sensing to detect neural diseases	5
A better understanding of daily life abdominal wall mechanical solicitation: Investigation of intra-abdominal pressure variations by intragastric wireless sensor in humans	5
RETRACTED: Predicting Breast Cancer Risk from Histopathology Images using Hybrid Deep Learning Classifier	5
Development of a novel FE model for investigation of interactions of multi-motion segments of the lumbar spine	5
Static strength of lower-limb prosthetic sockets: An exploratory study on the influence of stratigraphy, distal adapter and lamination resin	5
Position-based dynamics simulator of vessel deformations for path planning in robotic endovascular catheterization	5
Multi-scale feature fusion model for real-time Blood glucose monitoring and hyperglycemia prediction based on wearable devices	5
Ex vivo experimental strategies for assessing unconstrained shoulder biomechanics: A scoping review	5
Computer aided diagnostic model for knee osteoarthritis: A multi-modal feature regression approach	5
Development of a bottle-type sensor measuring two-hand movement	5
Osteoporosis Screening: Applied Methods and Technological Trends	5
Finite element study of a partial meniscectomy of a complete discoid lateral meniscus in adults	5
Mechanical and biodegradability of porous PCL/PEG copolymer-reinforced cellulose nanofibers for soft tissue engineering applications	5
RETRACTED: Medical CT image diagnosis and simulation of drug sedation during ultrasound-guided transbronchial needle aspiration process	5
Fractional calculus integration for improved ECG modeling: A McSharry model expansion	5
An optimal fast fractal method for breast masses diagnosis using machine learning	5
Exemplar deep and hand-modeled features based automated and accurate cerebral hemorrhage classification method	5
Dynamic simulation of aortic valve stenosis using a lumped parameter cardiovascular system model with flow regime dependent valve pressure loss characteristics	5
Haemodynamic effects of non-Newtonian fluid blood on the abdominal aorta before and after double tear rupture	5
Novel neural network model for predicting susceptibility of facial post-inflammatory hyperpigmentation	5
A numerical study of the contact geometry and pressure distribution along the glenoid track	5
Impact testing methods to simulate head impacts due to falls from standing height	5
A new algorithm for fetal heart rate detection: Fractional order calculus approach	5
Finite element investigation of the influence of a new transpedicular vertebral implant positioning on biomechanical responses of the spine segment	5
Effect of components mal-alignment on biomechanics in fixed unicompartmental knee arthroplasty using multi-body dynamics model during a walking cycle	5
On the use of inertial measurement units and musculoskeletal modeling in the calculation of muscle and joint loading at the shoulder	5
A compressomyograph train of four monitoring device	5
Real time control and fabrication of a soft robotic glove by two parallel sensors with MBD approach	5
Influence of parameters on temperature rise and chips morphology in low-frequency vibration-assisted bone drilling	5
A comparison between the effect of systemic and coated drug delivery in osteoporotic bone after dental implantation	5
Evolution of novel grinding tool in removing coronary artery calcification tissue process	5
Robustness analysis of soft Gaussian Mixture Model clustering for acoustic emission features in characterizing osteoarthritic knees	5
The biomechanical effect of different types of ossification of the ligamentum flavum on the spinal cord during cervical dynamic activities	5
Systematic error compensation for improving accuracy of the electrosurgical unit	5
Novel tetrapolar single-needle electrode for electrochemotherapy in bone cavities: Modeling, design and validation	5
Automatic continuous distraction osteogenesis device for hand reconstruction applications	5
Electromyography as a surrogate for estimating metabolic energy expenditure during locomotion	5
Recommendations for standardised screw pull-out from polyurethane foam - The influence of density variations of the test foam and the insertion method	5
In-vivo tibiofemoral kinematics of the normal knee during closed and open kinetic chain exercises: A comparative study of box squat and seated knee extension	4
Mechanical testing and biomechanical CT analysis to assess vertebral flexion strength of Chinese cadavers	4
Experimental evaluation of a patient specific Brachio-Cephalic Arterio Venous Fistula (AVF): Velocity flow conditions under steady and pulsatile waveforms	4
Effects of ultrasound settings on temperature changes in NiTi implants	4
The influence of boiling bubble on the acoustic field and bubble dynamics in histotripsy: A numerical investigation	4
Structural testing of lower-limb prosthetic sockets: A systematic review	4
Comparison of LED- and LASER-based fNIRS technologies to record the human peri‑spinal cord neurovascular response	4
EISI: Extended inter-spike interval for mental health patients clustering based on mental health services and medications utilisation	4
Phase changes of the flow rate in the vertebral artery caused by debranching thoracic endovascular aortic repair: Effects of flow path and local vessel stiffness on vertebral arterial pulsation	4
Experimental and computational study of pulsatile flow characteristics in Romanesque and gothic aortic arch models	4
Comparison of wired and wireless electromagnetic hand motion tracking in central venous access: Are they equivalent enough to cut the cord?	4
Verifying the accuracy and precision of foot bone segmentation from fan beam and cone beam computed tomography scans	4
On the mechanics of monofilaments used in touch sensory perception	4
Mathematical representation and nonlinear modelling of the Wheatley mitral valve	4
Towards improving the accuracy of musculoskeletal simulation of dynamic three-dimensional spine rotations with optimizing model and algorithm	4
A novel technology integrating robotics and 3D printing for closed reduction of tibia shaft fracture with MIPPO:A proof-of-concept study	4
A biomechanical study of osseointegrated patient-matched additively manufactured implant for treatment of thumb amputees	4
Low plasticity burnishing improves fretting fatigue resistance in bone-anchored implants for amputation prostheses	4
A 3D phantom for EIT printed in a single part	4
Investigation of stair ascending and descending activities on the lifespan of hip implants	4
Thermal imaging for characterization of skin adaptation in prosthesis users	4
Eulerian- lagrangian dense discrete phase model (DDPM) of stenotic LAD coronary arteries in comparison with single phase modeling	4
Four-dimensional flow magnetic resonance imaging assessment of left ventricular hemodynamics in transplanted hearts with good postoperative course	4
Effect of excitation sequence of myocardial contraction on the mechanical response of the left ventricle	4
Efficient and optimized communication in biomedical sensor networks based on bioinspired particle swarm optimization for medical applications	4
Fast quasi-automated 3D reconstruction of lower limbs from low dose biplanar radiographs using statistical shape models and contour matching	4
Benchmarking 2D human pose estimators and trackers for workflow analysis in the cardiac catheterization laboratory	4
Detection of inflow obstruction in left ventricular assist devices by accelerometer: An in vitro study	4