Medical Engineering & Physics

Papers
(The TQCC of Medical Engineering & Physics is 6. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)
ArticleCitations
Novel 3D-printed foot orthoses with variable hardness: A comfort comparison to traditional orthoses122
Experimental and numerical assessment of two reconstructive techniques for the fragility fractures of the pelvis type Ia49
On the relation between tidal and forced spirometry49
Magnetism-enhanced biomaterial Mg guide wire by MAP process for development of catheter insertion46
Drug injection and dispersion characteristics of an air-powered needle-free injector45
Letter to the editor44
Computer simulation of low-power and long-duration bipolar radiofrequency ablation under various baseline impedances36
Functional brain response pattern under rubber hand illusion based on fNIRS34
Breast cancer histopathology image classification using transformer with discrete wavelet transform33
Does bone penetration of cement differ by cement type and application time-point?33
Musculoskeletal Injury Recovery Assessment using Gait Analysis with Ground Reaction Force Sensor31
Experimental investigation of the optimal driving pressure for a larger-volume controllable jet injection system29
Numerical simulation of the vascular structure dependence of blood flow in the kidney28
MR-based quantitative measurement of human soft tissue internal strains for pressure ulcer prevention28
Numerical analysis of oxygen uptake processes by red blood cells in stopped-flow measurements: Effects of cell shape, membrane permeability and unstirred layer28
Comparison of wear on articular cartilage by titanium alloy, ultra-high-molecular-weight polyethylene, and carbon fibre reinforced polyether-ether-ketone: A pilot study26
Semi-supervised medical image segmentation with dual-branch mixup-decoupling confidence training24
Membrane capacitance and characteristic frequency are associated with contractile properties of skeletal muscle23
Computer assisted identification of stress, anxiety, depression (SAD) in students: A state-of-the-art review23
EEG-explained cortical correlates of transfemoral amputees during balancing with vibrotactile feedback: A pilot study23
ECG arrhythmia detection in an inter-patient setting using Fourier decomposition and machine learning23
Prediction of temperature elevation in rotary ultrasonic bone drilling using machine learning models: An in-vitro experimental study21
A hybrid orthosis combining functional electrical stimulation and soft robotics for improved assistance of drop-foot21
Comparison of the biomechanical effects of lumbar disc degeneration on normal patients and osteoporotic patients: A finite element analysis20
Simulation study on parameter dependence of dynamic osteocyte response under low-magnitude high-frequency vibration20
Effects of wall compliance on pulsatile flow in a full-scale, patient-specific cerebral aneurysm model: Particle image velocimetry experiments20
Letter to the editor in response to: Biomechanical evaluation for bone arthrosis morphology based on reconstructed dynamic kinesiology19
A geometry-based finite element tool for evaluating mitral valve biomechanics19
A Simulation Study of the Effects of His Bundle Pacing in Left Bundle Branch Block18
Effective cardiac disease classification using FS-XGB and GWO approach18
A robust technique for optimal fitting of roll-over shapes of human locomotor systems18
An innovative method for trans-impedance matrix interpretation in hearing pathologies discrimination18
Biomechanical analysis of the novel S-type dynamic cage by implementation of teaching learning based optimization algorithm - An experimental and finite element study17
Evaluation of flow field in the anterior segment during irrigation and aspiration in cataract surgery with three-dimensional computational simulation17
Accuracy of radiostereometric analysis using a motorized Roentgen system in a pilot study for clinical simulation17
A novel combined deep learning methodology to non-invasively estimate hemoglobin levels in blood with high accuracy17
Design of a low-power gradient amplifier for benchtop nuclear magnetic resonance spectrometer16
Evaluation of transjugular intrahepatic portosystemic shunt and modified sclerotherapy in preventing rebleeding of esophageal and gastric varices16
3D reconstruction of the scapula from biplanar X-rays for pose estimation and morphological analysis16
Corrigendum to ‘Foot trajectories and loading rates in a transfemoral amputee for six different commercial prosthetic knees: An indication of adaptability’[Medical Engineering and Physics, Volume 68, 16
Maximum abdominal excursion assessment using an abdominal excursion measuring device: Reliability and validity of a new device for simple and quantitative assessment of respiratory function16
Synergistic dual-nanostructure antibacterial-antifouling coating for tracheostomy tubes to reduce ventilator-associated pneumonia16
Critical loss of primary implant stability in osteosynthesis locking screws under cyclic overloading16
A fast permutation entropy for pulse rate variability online analysis with one-sample recursion15
Towards a reduced order model for EVAR planning and intra-operative navigation15
Patient-specific arterial wall generation for intracranial aneurysms with a variable and a near realistic vessel wall thickness for FSI studies15
Validation of marker-based tracking with a biplanar fluoroscopy system optimized for the foot and ankle15
Accuracy of instrument tip position using fiber optic shape sensing for navigated bronchoscopy14
Optimal configurations of an electromagnetic tracking system for 3D ultrasound imaging of pediatric hips – A phantom study14
Free-hand 3D ultrasound imaging for vascular access14
Surgical treatment of small recurrent gliomas based on MR imaging examination13
A mechanics-based model for predicting flexible needle bending with large curvature in soft tissue13
Corrigendum to ‘Biomechanics of first ray hypermobility: An investigation on joint force during walking using finite element analysis’. [Med. Eng. Phys. 36(2014) 1388–1393]13
A 3D multi-modal multi-scale end-to-end classifier for Alzheimer's disease diagnosis13
Smartphone generated electrical fields induce axon regrowth within microchannels following injury12
Development and validation of a device to measure the force applied to the coxofemoral joint during stress radiography for early diagnosis of canine hip dysplasia12
Functional quality assessment of whole-body vibration training devices based on instantaneous amplitude and frequency of photogrammetric vibration measurements12
Mechanical load applied by Intraosseous Transcutaneous Amputation Prosthesis (ITAP) during walking on level and sloped treadmill: A case study12
A biomechanical analysis of skiing-related anterior cruciate ligament injuries based on biomedical imaging technology12
Letter to the editor11
Image testing based on biomedical drug loading in cardiovascular drug care simulation for coronary heart disease11
Effects of miniscrew location on biomechanical performances of bone-borne rapid palatal expander to midpalatal suture: A finite element study11
Anatomic ankle implant can provide better tibiotalar joint kinematics and loading11
Towards the 2D velocity reconstruction in abdominal aorta from Color-Doppler Ultrasound11
Evaluation of a method to quantify posture and scapula position using biplanar radiography11
Relation between mechanical and densimetric properties to fractal dimension in human rib cortical bone11
Spine slenderness is not an early sign of progression in adolescent idiopathic scoliosis11
Exploring the bioactivity of reduced graphene oxide and TiO2 nanocomposite for the regenerative medicinal applications10
Accuracy tradeoffs between individual bone and joint-level statistical shape models of knee morphology10
How well does intra-operative contact path predict post-operative contact path during activities of daily living after medial unicompartmental knee arthroplasty?10
Integrating movement analysis and cardiorespiratory assessment in smart electrically assisted bicycle sessions- Proof of concept -10
Combining robotics and functional electrical stimulation for assist-as-needed support of leg movements in stroke patients: A feasibility study10
Heart rate estimation for U-Net and LSTM models combining multiple attention mechanisms10
Image quality and diagnostic accuracy of different dosages of iodixanol in computed tomography angiography and perfusion of overweight patients with coronary artery stenosis: A feasibility study10
Non-uniform assignment method for skeletal materials based on slope difference distribution and experimental validation10
In-vitro viability of laser cladded Fe-based metallic glass as a promising bioactive material for improved osseointegration of orthopedic implants10
Aging-related structural change in 3D extracellular matrix affects its mechanics10
A long short-term memory modeling-based compensation method for muscle synergy10
Comparison of electromyography, sound, bioimpedance, and high-resolution manometry for differentiating swallowing and vocalization events9
Electrical pulse generator for electroporation induction in myocytes: Compared effects on skeletal and cardiac cells9
Influence of surface type on outdoor gait parameters measured using an In-Shoe Motion Sensor System9
Reliability of ultrasound to measure the distance between lumbar interspinous processes9
A novel STA-EEGNet combined with channel selection for classification of EEG evoked in 2D and 3D virtual reality9
Computing intracoronary blood flow rate under incomplete boundary conditions: Combing coronary anatomy and fractional flow reserve9
The effect of existing and novel walker boot designs on offloading and gait mechanics9
Development of a mechanical characterisation device for intracranial aneurysms: Calibration on polymeric phantom arteries9
Blinded prediction of custom-made pelvic implant failure using patient-specific finite element modeling9
Investigating the course and predictors of desire to void based on heart rate variability9
A finite element model to simulate intraoperative fractures in cementless hip stem designs9
Research on heart rate extraction method based on mobile phone video9
Acknowledgement to Reviewers 20239
Mixture density knowledge distillation in super-resolution reconstruction of mri medical images9
A compact and cost-effective gait simulator to advance prosthesis development with reduced reliance on human subject testing: Development, validation and application9
Assessment of pre- and post-operative gait dynamics in total knee arthroplasty by a wearable capture system9
An in vitro experimental study on the synergistic pathogenicity analysis of pulsatile tinnitus involving venous flow velocity, sigmoid sinus wall dehiscence and sinus malformation9
Utilization of skin color change for image-based tactile sensing9
Design and validation of a pediatric gait assistance exoskeleton system with fast non-singular terminal sliding mode controller9
Genetic algorithm based ensemble system using MLR and MsetCCA methods for SSVEP frequency recognition9
Surgical technique and implant design affect abduction kinematics and functional outcomes after reverse shoulder arthroplasty8
A digital process to replicate the socket-foot alignment in below-knee running specific prostheses8
An explainable machine learning framework for predicting driving states using electroencephalogram8
Test-retest reliability of non-invasive P2/P1 ratio and time to peak at rest and during isometric handgrip stress8
Estimation of critical closing pressure using intravascular blood pressure of the common carotid artery8
An application based on the analysis of thermograms to calculate the thermographic index for pain and swelling assessment8
Hybrid artificial intelligence approaches and bioimpedance spectroscopy for classifying pancreatic disease8
Experimental studies on penetration process of high-speed water-jet into ballistic gelatin8
Biomechanical properties of artificial bones made by Sawbones: A review8
Modelling and numerical solution of variable orifice flow meter for application of respiratory8
Comparison of CT noise reduction performances with deep learning-based, conventional, and combined denoising algorithms8
Study on the properties of capsule shell prepared by multi-type HPMC mixed system8
Fundus image based diabetic retinopathy detection using EfficientNetB3 with squeeze and excitation block8
Characterization of the ankle dynamic joint stiffness as a function of gait speed for overground and treadmill walking8
Reproducibility of dynamometers in handrail format in evaluating handgrip strength and traction in young and older adults8
Combining algorithms for the automated detection of auditory brainstem responses in newborns8
Cyclic socket enlargement and reduction during walking to minimize limb fluid volume loss in transtibial prosthesis users8
Accuracy evaluation of 3D-printed noninvasive adhesive marker for dynamic navigation implant surgery in a maxillary edentulous model: An in vitro study8
3D bioheat transfer mapping reveals nanomagnetic particles effectiveness in radiofrequency hyperthermia breast cancer treatment comparing to experimental study8
Development, calibration and validation of a comprehensive customizable lumbar spine FE model for simulating fusion constructs8
Development and validation of 3D printed anthropomorphic head phantom with eccentric holes for medical LINAC quality assurance testing in stereotactic radiosurgery8
Efficient feature selection based novel clinical decision support system for glaucoma prediction from retinal fundus images8
Strain based in vitro analysis of dental implant using artificial bone model and validation by numerical technique8
Methodology to identify subject-specific dynamic laxity tests to stretch individual parts of knee ligaments8
Physiological consequences of half-embedded drug-eluting stent on coronary drug-transport: A two-species drug delivery simulation8
Active constraint control for the surgical robotic platform with concentric connector joints8
Modeling and experimental study of the intervention forces between the guidewire and blood vessels8
Predicting spatio-temporal radiofrequency ablation temperature using deep neural networks7
Does interpolation and intra-user variability affect the accuracy of arthrokinematic measurements in the knee? A dual fluoroscopic imaging and model-based tracking study7
In vivo biomechanical dynamic simulation of a healthy knee during the single-leg lunge and its experiment validation7
Simulation of cancer progression in bone by a virtual thermal flux with a case study on lumbar vertebrae with multiple myeloma7
Methodology to identify optimal subject-specific laxity tests to stretch individual parts of knee ligaments7
The influence of blood velocity and vessel geometric parameters on wall shear stress7
ExoMechHand prototype development and testing with EMG signals for hand rehabilitation7
Feature evaluation for myoelectric pattern recognition of multiple nearby reaching targets7
Evaluation of a finite state machine algorithm to measure stepping with ankle accelerometry: Performance across a range of gait speeds, tasks, and individual walking ability7
Comparing fluid dynamics of newborn and adult centrifugal pumps in cardiopulmonary bypass procedures7
3D quasi-automatic spine length assessment using low dose biplanar radiography after surgical correction in thoracic idiopathic scoliosis7
Weighted combination and singular spectrum analysis based remote photoplethysmography pulse extraction in low-light environments7
Medical devices: Materials, mechanics, and manufacturing7
Nonlinear analysis of dynamic stability in walking with toe-only rocker sole shoes in elderly7
A phased array ultrasound system with a robotic arm for neuromodulation7
Fetal magnetocardiographic recordings with a prototype bed-based array system of optically-pumped magnetometers7
Tumor size dependent MNP dose evaluation in realistic breast tumor models for effective magnetic hyperthermia7
Merging mixed reality and computational modeling for enhanced visualization of cardiac biomechanics7
IJES-OA Net: A residual neural network to classify knee osteoarthritis from radiographic images based on the edges of the intra-joint spaces7
Publisher’s Note7
Short-term efficacy, safety and survival of laparoscopic radical resection for colorectal cancer patients with bowel obstruction7
Posture prediction models in digital human modeling for ergonomic design: A systematic review7
Improvement of postural control in the frail older adults through foot care: A pre- and post-intervention study7
Effects of injection rates and tissue diffusivity in magnetic nano-particle hyperthermia7
A wireless intraoperative joint force sensing system for total hip arthroplasty7
Effects of movement direction and limb dominance on ankle muscular force in sidestep cutting7
BAEN-SKCNN: A novel framework for scoliosis early screening and severity diagnosis using unclothed back images7
Mechanical characterization of human skin—A non-invasive digital twin approach using vibration-response integrated with numerical methods7
Patient's airway monitoring during cardiopulmonary resuscitation using deep networks6
Design and development of a novel double-chamber syringe concept for venous catheterization6
Dosimetric benefits and preclinical performance of steerable needles in HDR prostate brachytherapy6
An enhanced UHMWPE wear particle detection approach based on YOLOv96
Development of a peak insertion torque prediction model for parallel-walled dental implants6
The clinical applicability of sensor technology with body position detection to combat pressure ulcers in bedridden patients6
Implications of using simplified finite element meshes to identify material parameters of articular cartilage6
Computational fluid dynamics analysis of the fluid environment of 3D printed gradient structure in interfacial tissue engineering6
Automatically predicting lung tumor invasiveness using deep neural networks6
EMG optimization in OpenSim: A model for estimating lower back kinetics in gait6
Automated digital templating of component sizing is accurate in robotic total hip arthroplasty when compared to predicate software6
Decoding finger movement patterns from microscopic neural drive information based on deep learning6
Patient-specific computational haemodynamics associated with the surgical creation of an arteriovenous fistula6
A cascade approach for the early detection and localization of myocardial infarction in 2D-echocardiography6
Aided diagnosis of cervical spondylotic myelopathy using deep learning methods based on electroencephalography6
Using an instrumented hammer during Summers osteotomy: an animal model6
Thermal finite element analysis of localized hypothermia treatment of the human eye6
Fast diagnostic of osteoporosis based on hair analysis using LIBS technique6
A phantom study: Evaluation of a novel three-lumen balloon catheter for potential treatment of intractable limb ischemia6
Peak counting in surface electromyography signals for quantification of muscle fatigue during dynamic contractions6
A novel method for estimating sternoclavicular posterior rotation with promising accuracy: A validity comparison with minimizing acromioclavicular rotation approach6
The sensitivity of an anatomical coordinate system to anatomical variation and its effect on the description of knee kinematics as obtained from dynamic CT imaging.6
Predicting ground reaction forces and center of pressures from kinematic data in crutch gait based on LSTM6
Kinematics modelling and dynamics analysis of an SMA-actuated active flexible needle for feedback-controlled manipulation in phantom6
A comparative analysis of Constant-Q Transform, gammatonegram, and Mel-spectrogram techniques for AI-aided cardiac diagnostics6
Establishing error bounds for internal calibration of quantitative computed tomography6
A coronary atherectomy system with a novel burr design for two-phase operation6
0.19377899169922