Composites Part B-Engineering

Papers
(The median citation count of Composites Part B-Engineering is 14. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-07-01 to 2025-07-01.)
ArticleCitations
Corrigendum to “The effect of laser assisted tape placement processing conditions on microstructural evolution, residual stress and interlaminar shear strength of carbon fibre/PEEK laminates” [Composi587
Bio-inspired patterned adhesive single-lap joints for CFRP and titanium462
Promoting osseointegration of titanium by pH-responsive releasing of H2S and optimizing polarization time for macrophages458
Super-high bonding strength of polyphenylene sulfide-aluminum alloy composite structure achieved by facile molding methods456
High density polyethylene composites containing alumina-toughened zirconia particles: Mechanical and tribological behavior307
Rapid formation of ultrahigh strength vascular graft: Prolonging clotting time micro-dimension hollow vessels with interpenetrating polymer networks274
Elevating key performance of ecological high ductility cementitious composites by coral: The role of exclusive microstructure272
Shape-reconfigurable transparent wood based on solid-state plasticity of polythiourethane for smart building materials with tunable light guiding, energy saving, and fire alarm actuating functions265
An ultra-lightweight and hydrophobic piezoresistive foam with super-wide strain and pressure detection range262
Graphene oxide-reinforced thin shells for high-performance, lightweight cement composites246
Novel approach for crack detections and rapid repairment methods in cement-based self-heating composites for smart infrastructures231
Progressive conductivity modular assembled fiber reinforced polymer composites for absorption dominated ultraefficient electromagnetic interference shielding226
Editorial Board206
Dual-functional borosilicate glass (BSG) delivery implant for osteomyelitis treatment and bone regeneration204
Coal char as an economical filler for phenolic composites200
Prediction and analysis of properties of ramie fiber staple yarn reinforced unsaturated polyester composite based on fiber packing density198
Influence of fiber architecture variations on the mechanical behavior of carbon fiber braids subjected to quasi-static loads197
Revitalizing osteoporotic bone repair via multilevel ROS scavenging and osteoimmune regulating hydrogel193
Highly conductive hybrid carbon nanotube fibers: Strategies and future directions for replacing copper with next-generation conductors192
Evolution of 3D interconnected composites of high-entropy TiVNbMoTa alloys and Mg during liquid metal dealloying192
Type I size effect and failure behavior of woven composites under biaxial flexure190
Transforming diapers into inorganic carbonate enriched Carbon catalyst for improved trimethoprim degradation performance188
Experimental study on the effect of waviness defects on composite material impact dynamics181
Comparative study of the thermoresistive behavior of carbon nanotube-based nanocomposites and multiscale hybrid composites166
A 3D voxel-based mesostructure generator for finite element modelling of tow-based discontinuous composites166
Ablation-resistant (Hf,Zr)B2–SiC composite coating with alternating lamellar architecture by one-step atmospheric plasma spraying165
Facile fabrication of ultrastrong polyethylene nanocomposite films with low filler content via flow-driven graphene re-dispersion assisted crystallization161
The synergistic effect between bis(2,2,6,6-tetramethyl-4-piperidyl) sebacate and polysiloxane on the photo-aging resistance and flame retardancy of polypropylene160
Highly robust, processable and multi-functional PDMS/graphene composite aerogel constructed by “soft-hard” interface engineering strategy157
Novel AIE luminescent tetraphenylethene-doped poly (lactic acid) composites for fused deposition modeling and their application in fluorescent analysis of 3D printed products156
3D printing of architectured epoxy-based composite lattices with exceptional strength and toughness155
Integrated hydrogel of fucoidan and rhCol III for bioprosthetic heart valves to promote the antithrombosis, anti-inflammatory, and anti-calcification properties154
Geometrical optimization of thermoforming continuous fibers reinforced thermoplastics with Finite Element Models: A case study152
Mode I and Mode II fracture behavior in pultruded glass fiber-polymer – Experimental and numerical investigation150
Influence of different additives on the rheology and microstructural development of MgO–SiO2 mixes150
Heat transfer modelling of carbon nanotube reinforced composites149
Synthesis and characteristic of the ternary composite electrode material PTCDA/CNT@MPC and its electrochemical performance in sodium ion battery148
Constructing two-dimensional lamellar monometallic carbon nanocomposites by sodium chloride hard template for lightweight microwave scattering and absorption147
Pressure resistance characterisation of vascular networks embedded in carbon composites for high energy physics applications147
One-step green synthesis of multi-morphological carbon nanotube forests for superior microwave absorption and electrocatalysis144
Photothermally responsive smart elastomer composites based on aliphatic polycarbonate backbone for biomedical applications142
A novel bio-inspired microstructure for improved compressive performance of multidirectional CFRP laminates140
Enhancing strength-ductility synergy and mechanisms of Al-based composites by size-tunable in-situ TiB2 particles with specific spatial distribution140
Effect of sulphoaluminate cement on fresh and hardened properties of 3D printing foamed concrete137
Manufacturing poly(butylene adipate-co-terephthalate)/high density polyethylene blend-based nanocomposites with enhanced burning anti-dripping and physical properties — Effects of carbon nanofillers a134
Strain-induced structural evolution of interphase interfaces in CuZr-based metallic-glass composite reinforced by B2 crystalline phase134
High-temperature behavior of polyvinyl alcohol fiber-reinforced metakaolin/fly ash-based geopolymer mortar133
Double crosslinking chitosan sponge with antibacterial and hemostatic properties for accelerating wound repair133
Liquid metal flexible multifunctional sensors with ultra-high conductivity for use as wearable sensors, joule heaters and electromagnetic shielding materials133
Experimental study of post-buckled single-stringer composite specimens under fatigue loads with different load levels and load ratios132
Adhesive bonding of CFRP with a 3D-printed short-fiber composite: An experimental study on the effects of geometry and adhesive system on joint performance132
Supersonically sprayed transparent flexible multifunctional composites for self-cleaning, anti-icing, anti-fogging, and anti-bacterial applications132
Strengthening nanocrystalline immiscible bimetallic composite by high-entropy effect130
The high-strength and toughness Janus bionic periosteum matching bone development and growth in children130
Investigation of welding repair methods for thermoplastic composite joints130
That’s how the preform crumples: Wrinkle creation during forming of thick binder-stabilised stacks of non-crimp fabrics129
Hexagonal boron nitride (h-BN) “a miracle in white”: An emerging two-dimensional material for the advanced powered electronics and energy harvesting application129
Cobalt/copper coordinated organic-inorganic hybrid fibrous phosphorus-nitrogen flame retardant: Simultaneously improving fire safety, deicing and mechanical properties for thermoplastic polyurethane128
High-temperature multispectral stealth metastructure from the microwave-infrared compatible design126
Combined loading of unreinforced and Z-pin reinforced composite pi joints: An experimental and numerical study126
Interfacial engineering of epoxy/silica nanocomposites by amino-rich polyethyleneimine towards simultaneously enhanced rheological and thermal-mechanical performance for electronic packaging applicati122
An efficient machine learning-based model for predicting the stress-strain relationships of thermoplastic polymers with limited testing data121
Waveform impact on thermo-mechanical fatigue crack growth of a non-crystallizing rubber: Experimental observation and numerical simulation121
Stress engineering of SiCf/SiC composites: Interfacial stress adjustment and its effects on tensile behaviors of UD SiCf/SiC composites fabricated by hybrid CVI and PIP methods120
A review on recent advances in the fabrication and evaluation of superhydrophobic concrete120
Improvement on strength and toughness for CFRPs by construction of novel “soft-rigid” interface layer120
Synergistically enhanced strength and ductility of TiB/(TA15-Si) composites: A two-step HIP strategy118
La-doped Sr4Fe4Co2O13-δ as a promising in-situ self-assembled composite cathode for protonic ceramic fuel cells118
Electromagnetic interference shielding epoxy composites with satisfactory thermal conductivity and electrical insulation performance enabled by low-melting-point alloy layered structure117
Towards understanding the hole making performance and chip formation mechanism of thermoplastic carbon fibre/polyetherketoneketone composite117
Surface functionalization of Ti3C2Tx and its application in aqueous polymer nanocomposites for reinforcing corrosion protection117
Effect of the nano-filler content on the compressive strength of continuous carbon fibre/epoxy matrix composites116
A one-photon excitation pathway in 0D/3D CoS2/ZnIn2S4 composite with nanoparticles on micro-flowers structure for boosted visible-light-driven photocatalytic hydrogen evolution116
Formation of a novel Cu-containing bioactive glass nano-topography coating with strong bactericidal capability and bone regeneration114
Polyphosphate enhanced biomimetic mineralization of 3D printing scaffolds for bone regeneration114
Hard-magnetic phenomena enable autonomous self-healing elastomers114
The pyrolysis of end-of-life wind turbine blades under different atmospheres and their effects on the recovered glass fibers113
Trimetallic Prussian blue analogue derived FeCo/FeCoNi@NPC composites for highly efficient microwave absorption113
Tunable mechanical properties of glass fiber/epoxy composites by incorporating bioinspired montmorillonite–carbon nanotube/epoxy interface layer around the fiber113
Recent advances in 3D printing of tough hydrogels: A review112
A hyperbranched P/N/B-containing oligomer as multifunctional flame retardant for epoxy resins111
Simultaneous enhancement of strength and ductility in AlCu alloy via trans-granular graphene nano-shells110
High-temperature workable flexible piezoelectric energy harvester comprising thermally stable (K,Na)NbO3-based ceramic and polyimide composites110
A parametric study on static behavior and load sharing of multi-bolt hybrid bonded/bolted composite joints110
An analytical friction model for fibre tow slippage in Tailored Fibre Placement preforms based on pull-out experiments109
Synergistic reinforcement effect of Fe and in-situ synthesized MgAlB4 whiskers in Al matrix composites109
Experimental investigation of the path-independent fracture of composites108
Surface and honeycomb core damage in adhesively bonded aluminum sandwich panels subjected to low-velocity impact107
Integrated design and experimental verification of assembly fiber reinforced thermoplastic plastics (AFRTP) automobile seat beams107
In situ multi-metal alloying in laser-based additive manufacturing: A concise review106
Multidisciplinary space shield origami composite: Incorporating cosmic radiation shielding, space debris impact protection, solar radiative heat shielding, and atomic oxygen erosion resistance106
Mechanical instability tuning of a magnetorheological elastomer composite laminate105
The effect of particle toughening layers on the material processibility and forming characteristics of carbon fibre/epoxy prepregs105
Microwave assisted black phosphorus-based core-shell composites with synergistic antibacterial and osteogenic ability for bone tissue repair105
Experimental and numerical investigation of the intra-ply shear behaviour of unidirectional prepreg forming through picture-frame test104
A comprehensive investigation into the influence of variation in the stacking sequence on the mechanical behaviour and drilling machinability of basalt fiber-reinforced composite tubes104
The static and fatigue failure of co-cured composite joints with two-scale interface toughening104
Damage tolerance of basalt fiber reinforced multiscale composites: Effect of nanoparticle morphology and hygrothermal aging103
Microstructure control in printable porous polymer composites103
Fluffy sponge-reinforced electrospun conduits with biomimetic structures for peripheral nerve repair102
All-in-One layer-structured multi-functional conductive polypyrrole coated polyimide aerogel101
Enhanced delamination resistance and through-thickness thermal conductivity of carbon fiber epoxy resin composites by in situ generation of interconnected thick oriented matrix-carbon nanotube layer101
Influence of fiber/matrix interface on gas permeability properties of CF/TP composites101
Retraction notice to “Study on the antioxidation properties and mechanisms of SiC/Si–ZrB2–CrSi2/SiC multilayer coating related to strain compatibility and stress distribution via XRD and Raman spectra101
Numerical fatigue assessment of a cross-ply carbon fiber laminate using a probabilistic framework101
Editorial Board100
Editorial Board100
Editorial Board100
Editorial Board99
Non-destructive mechanical characterisation of thin-walled GFRP beams through dynamic testing and model updating99
Tensile failure strain and microstructure of unidirectional carbon fibre non-crimp fabric composites98
Tailoring of crystal size and significant enhancement of physical property, ductility and toughness in in-situ nano kraft lignin/nano-fibrillated cellulose biocomposite98
Development of Ag@Si composite sinter joining with ultra-high resistance to thermal shock test for SiC power device: Experiment validation and numerical simulation98
Composite materials combined with stem cells promote kidney repair and regeneration98
Preparation and characterization of branch-like heteroatoms-doped Ni@C nanofibers for high-performance microwave absorption with thin thickness97
A barnacle-inspired interface for enhancing the interfacial properties of carbon fiber-reinforced poly(phthalazinone ether nitrile ketone) composite96
Importance of cohesive failure mode in fracture toughness enhancement of polymer nanocomposites with covalent grafting: A multiscale study95
Investigation on air blast resistance of POZD-coated composite steel plates: Experiment and numerical analysis95
Lithium-containing bioactive glasses enhanced 3D-printed PLGA scaffolds for bone regeneration in diabetes95
Hierarchical bio-inspired design and fabrication of all-dimensional superhydrophobic ultra-lightweight high-volume fly ash cement foams using novel ultrasonic-assisted siloxane-encapsulated pickering 94
Preparation of thermoplastic polyurethane sealant and its adherence properties under various environments94
Combining advanced 3D printing technologies with origami principles: A new paradigm for the design of functional, durable, and scalable springs94
3D printing and epoxy-infusion treatment of curved continuous carbon fibre reinforced dual-polymer composites93
The synergistic effect of greenhouse gas CO2 and silica fume on the properties of 3D printed mortar93
Mechanical properties and damage analysis of S-glass: A reactive molecular dynamics study91
Double-layer woven lattice truss sandwich composite for multifunctional application: Design, manufacture and characterization91
(AlCrMg)x(PO4)y/MgO composite: A new thermal protection and insulation material up to 2400 °C91
Effects of natural aging on precipitation behavior and hardening ability of peak artificially aged SiCp/Al-Mg-Si composites90
Efficient analysis of composites manufacturing using multi-fidelity simulation and probabilistic machine learning90
Fruitful design of novel SrV2O6@MCM-41-based electrochemical sensor for carcinogenic carbendazim detection in complex real-world matrices90
A deep material network approach for predicting the thermomechanical response of composites89
Convenient preparation of activated carbon modified phosphoric acid-activated geopolymer microspheres (C@PAAGMs) for the efficient adsorption of ReO4−: Implications for TcO4− elimination88
Reaction mechanisms, recent progress and future prospects of tin selenide-based composites for alkali-metal-ion batteries88
Micro-structure modified decalcified bone matrix scaffolds and bone marrow stem cell–chondrocyte co-cultures promote stable cartilage regeneration88
Cellulose nanofibers reinforced nanocomposites with high strength and toughness by tunable wet-drawing and ionic cross-linking method87
Enzymolysis-treated wood-derived hierarchical porous carbon for fluorescence-functionalized phase change materials87
Silk fibroin/polyacrylamide-based tough 3D printing scaffold with strain sensing ability and chondrogenic activity87
Simulation and measurement of the self-heating phenomenon of carbon/epoxy laminated composites under fatigue loading87
Ultra stable and stretchable liquid-metal precisely patterned circuits for integrated wearable devices under heat-pressed87
Significantly improved high dielectric MWCNTs filled PVDF/PS/HDPE composites via constructing double bi-continuous structure86
Temperature adaptive microcapsules for self-healing cementitious materials86
Investigation of two sandwich-structured nanohybrid coating derived from graphene oxide/carbon nanotube on interfacial adhesion and fracture toughness of carbon fiber composites86
Soybean protein isolate/chitosan composite microcarriers for expansion and osteogenic differentiation of stem cells85
Flexible electronics from hybrid nanocomposites and their application as piezoresistive strain sensors85
Carbon material-based thermoelectric ultra-high-performance alkali-activated concrete85
Convenient synthesis of one-dimensional a-SEP@LDH via self-assembly towards simultaneously improved fire retardance, mechanical strength and thermal resistance for epoxy resin85
Chiral-assisted geometric phase metasurfaces: Manipulating orbital angular momentum for efficient and stable microwave attenuation85
2D organic-α-Co(OH)2 material and derived Co/C composites with bifunctions of anti-corrosion and microwave absorption85
Immobilization of (bio-)healing agents for self-healing concrete technology: Does it really ensure long-term performance?84
Construction of a ceramic coating with low residual stress on C/CA composites for thermal protection at ultra-high temperatures84
Short and long contact timescale Mode I tack response of uncured thermoset carbon/epoxy composite prepreg: An experimental study84
Repair of acrylic/glass composites by liquid resin injection and press moulding84
Conductive, Strong and Tough Reduced Graphene Oxide-based composite film for infrared camouflage application84
Soft magnetic composites for highly deformable actuators by four-dimensional electrohydrodynamic printing83
Synergistically enhanced PVDF-based nanofiber membranes randomly embedded with ZnWO4@PDA nanorods for self-powered sensors with multi-mode free switching83
Designing multi-aromatic ring epoxy composites to integrate high insulation and high heat resistance performances by electron-induced effect83
Unidirectional infiltrated PI/SiO2 composite aerogels with a confined reinforcing strategy for integrated thermal and acoustic insulation83
Functional AlF3 modification over 5 V spinel LiCoMnO4 cathode for Li-ion batteries83
Creating multilayer-structured polystyrene composites for enhanced fire safety and electromagnetic shielding82
A short review on recent advances in automated fiber placement and filament winding technologies82
Cold sintered composites consisting of PEEK and metal oxides with improved electrical properties via the hybrid interfaces82
ROS generation/scavenging modulation of carbon dots as phototherapeutic candidates and peroxidase mimetics to integrate with polydopamine nanoparticles/GOx towards cooperative cancer therapy82
Electrically conductive nanocomposites as heating elements for thermoplastics Joule welding81
Conductive ionogel with underwater adhesion and stability as multimodal sensor for contactless signal propagation and wearable devices81
Effect of temperature on binding process of calcium carbonate concrete through aragonite crystals precipitation81
Rare earth improves strength and creep resistance of additively manufactured Zn implants81
Microstructure and mechanical properties of B modified Ti–Fe alloy manufactured by casting, forging and laser melting deposition80
Diisocyanate-induced covalent cross-linking of MXene frameworks for electrically and mechanically robust EMI shielding films80
Microstructure-property relationships in cement mortar with surface treatment of microbial induced carbonate precipitation80
A review of magnetic ordered materials in biomedical field: Constructions, applications and prospects79
Multifunctional basalt fiber polymer composites enabled by carbon nanotubes and graphene79
Roles of multi-hierarchical char in flame retardancy for epoxy composites induced by modified thermal conductive fillers and flame-retardant assembly79
A facile strategy toward hierarchically porous composite scaffold for osteosarcoma ablation and massive bone defect repair79
Direct ink writing of functionally graded bone scaffolds using ceramic foams to mimic natural bone hierarchical porosity and multiple gradients79
Parametrically-upscaled continuum damage mechanics (PUCDM) model for multiscale damage evolution in bending experiments of glass-epoxy composites79
Micromechanical analysis and theoretical predictions towards thermal shock resistance of HfO2-Si environmental barrier coatings79
Highly thermally conductive 3D BN/MWCNTs/C spatial network composites with improved electrically insulating and flame retardancy prepared by biological template assisted method79
Highly stretchable and durable fibrous strain sensor with growth ring-like spiral structure for wearable electronics79
Excellent heat transfer and phase transformation performance of erythritol/graphene composite phase change materials78
Ablation behavior and mechanisms of Cf/(Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C–SiC high-entropy ceramic matrix composites78
Additive manufacturing of continuously reinforced thermally curable thermoset composites with rapid interlayer curing77
Experimental and numerical evaluation of the perforation resistance of multi-layered alumina/aramid fiber ballistic shield impacted by an armor piercing projectile77
Green flame-retardant flexible polyurethane foam based on polyphenol-iron-phytic acid network to improve the fire safety77
Electromagnetic techniques in carbon fibre and carbon fibre composites manufacturing: A review77
Targeted modification of black phosphorus by MIL-53(Al) inspired by “Cannikin's Law” to achieve high thermal stability of flame retardant polycarbonate at ultra-low additions77
Manganese empowered electronic modulated nanocatalysts facilitate bone reconstruction via osteoclastogenesis inhibition and osteogenesis activation bistimulatory strategy76
Skin-friendly and highly fireproof fabric up to 1142 °C weaved by basalt @ polyimide yarns76
On the evolution of energy dissipation in dispersed composite laminates under out-of-plane loading76
RETRACTED: Application of sulfur waste in biomaterials76
Corrigendum to “Near-Infrared light-triggered smart response platform integrating CeO2@Black phosphorus for enhanced antimicrobial, anti-inflammatory, and osseointegration properties of titanium impla75
Enhanced optical nonlinearity and ultrafast carrier dynamics of TiO2/CuO nanocomposites74
Chitosan coated bacteria responsive metal-polyphenol coating as efficient platform for wound healing74
The impacts of CaCO3 deposition in natural wood on its viscoelastic properties74
Synergistic effect of cellulose nanocrystals-graphene oxide as an effective nanofiller for enhancing properties of solventless polymer nanocomposites74
Multiple hydrogen bonding interactions toward rapidly self-healing, photothermal conversion elastomer composites74
Gradient structure regulation of liquid metal composite based on synergistic effect of metal coordination and acoustic field for soft electronics74
Micromechanical modelling of short fibre composites considering fibre length distributions74
Synergistically triggering macroscopic polarization and dynamic reconfiguration of CdS@SnS2 heterojunction to enhance piezo-photocatalytic nitrate reduction74
Gradient microstructure and strain field at interfacial zone between cement-based repair and concrete substrate74
Unraveling the role of ionic bonding interactions in electronic properties of graphene composite aerogels to enhance piezoresistive performance73
Design of zero thermal expansion and high thermal conductivity in machinable xLFCS/Cu metal matrix composites73
Corrigendum to “Nitric oxide-releasing l-Tryptophan and l-Phenylalanine based poly(ester urea)s electrospun composite mats as antibacterial and antibiofilm dressing for wound healing” [Compos B Eng 2273
Hybrid model of nonlinear homogenisation of anisotropic composites with ellipsoidal inclusions73
Damage detection in intra-ply glass/carbon laminated composites under Mode-I and Mode-II fracture loadings73
Chemical removal of formaldehyde at ambient condition based on graphene composite aerogels with hydrazide-decorated polymers generated by RAFT mechanism72
Novel computational design of high refractive index nanocomposites and effective refractive index tuning based on nanoparticle morphology effect72
Electronic metal-support interaction-induced space charge polarization for boosting photoelectrochemical water splitting72
Full-field investigation of dissipative mechanisms and thermoelastic inversion effects within glass-fiber reinforced polyamides subjected to low-cycle fatigue72
Construction of carbon coated spherical Zn0.71Mn0.29Se@C for high-performance aluminum ion batteries72
In-situ fatigue prognosis in laminated composites: A machine learning approach using self-temperature rise data72
Coagulation/anticoagulation-regulable and tough extracellular matrix hydrogels72
Food-derived Crassostrea gigas peptides self-assembled supramolecules for scarless healing72
Effect of cooling temperature on deconsolidation and pulling forces in a thermoplastic pultrusion process72
The development of laser powder bed fused nano-TiC/NiTi superelastic composites with hierarchically heterogeneous microstructure and considerable tensile recoverable strain71
Complex hydrogel for cartilage regeneration and anti-inflammation71
Development and fabrication of co-axially electrospun biomimetic periosteum with a decellularized periosteal ECM shell/PCL core structure to promote the repair of critical-sized bone defects71
Microscale experimental results and their implications for mesoscale modeling of damage initiation in cross-ply fiber reinforced composites71
Fe-NC nanozymes-loaded TiO2 nanotube arrays endow titanium implants with excellent antioxidant capacity for inflammation inhibition and soft tissue integration70
Multifunctional properties of carbon nanotube yarn/aerogel laminate composites70
An organic composite anode with multiple active points for aqueous lithium-ion batteries70
Thermally conductive composites with hydroxylated boron nitrides for the efficient thermal management of superconducting coils70
Dual-carbon coupled three-dimensional superstructures with dominant mesopores targeting fast potassium-ion storage70
An experimental investigation on performances recovery of glass fiber reinforced composites exposed to a salt-fog/dry cycle70
An experimental study of impulse-current-induced mechanical effects on laminated carbon fibre-reinforced polymer composites69
Elongation improvement of transparent and flexible surface protective coating using polydimethylsiloxane-anchored epoxy-functionalized siloxane hybrid composite for reliable out-foldable displays69
Hydrostable reconstructed wood with transparency, Excellent ultraviolet-blocking performance, and photothermal conversion ability69
Experimental and numerical fatigue damage characterization in multidirectional thermoplastic glass/polypropylene laminates based on in-situ damage observations69
Consolidation of aerospace-grade high-temperature thermoplastic carbon fiber composites via nano-engineered electrothermal heating69
An anchor-inspired interface for improving interfacial properties of carbon fiber-reinforced high-performance thermoplastic composites68
Cartilage regeneration achieved in photo-crosslinked hyaluronic hydrogel bioactivated by recombinant humanized collagen type III68
Novel arc-shaped ligaments to enhance energy absorption capabilities of re-entrant anti-trichiral structures68
Enhanced proton conductivity and CO2-tolerance of intermediate-temperature protonic ceramic fuel cell with lanthanum tungstate-based composite cathode68
Super-tough polylactic acid blends via tunable dynamic vulcanization of biobased polyurethanes68
Magnetic ZrO2/PEI/Fe3O4 functionalized MWCNTs composite with enhanced phosphate removal performance and easy separability68
Scalable manufactured bio-based polymer nanocomposite with instantaneous near-infrared light-actuated targeted shape memory and remote-controlled accurate self-healing68
Qualitative and quantitative analysis of neutron irradiation effects in SiC/SiC composites using X-ray computed tomography68
Porous SiCNnw/C/Si3N4 ceramics with controlled component and structure for electromagnetic wave absorption68
Unveiling the potential of M2X MXenes: Structure, properties, synthesis strategies, and supercapacitor applications68
In-suit cemented strategy enables intumescent flame retardant transition from hyper-hydrophilic to hydrophobic and aggregation flame retardant effect simultaneously in polypropylene68
Achieving simultaneous enhancement of strength and ductility in Al matrix composites by employing the synergetic strengthening effect of micro- and nano-SiCps68
Winding pattern design of composite cylinders considering the effect of fiber stacking68
Tailored thermoelectric performance of poly(phenylene butadiynylene)s/carbon nanotubes nanocomposites towards wearable thermoelectric generator application67
In-situ derived Mo-doped NiCoP and MXene to form Mott-Schottky heterojunction with tunable surface electron density to promote overall water splitting67
Fusion-bonding performance of short and continuous carbon fiber synergistic reinforced composites using fused filament fabrication67
3D-printed pre-tapped-hole scaffolds facilitate one-step surgery of predictable alveolar bone augmentation and simultaneous dental implantation67
Facile preparation, closed-loop recycling of multifunctional carbon fiber reinforced polymer composites67
Aramid nanofibers-assisted graphite films for efficient electromagnetic interference shielding67
Applications of artificial intelligence/machine learning to high-performance composites67
Mass-producible near-body temperature-triggered 4D printed shape memory biocomposites and their application in biomimetic intestinal stents67
Ultrahigh strength and modulus of polyimide-carbon nanotube based carbon and graphitic fibers with superior electrical and thermal conductivities for advanced composite applications67
0.076014995574951