Advances in Structural Engineering

Article	Citations
Test and analysis of ECC-NC composite column	181
Strain-path-dependent stress–strain model for ultrahigh-performance concrete columns constrained by stirrups	100
An image-based bridge displacement field measurement method with self-vibration elimination	72
A deep learning-based interferometric synthetic aperture radar framework for abnormal displacement deformation prediction of bridges	67
Examination of the beam eccentricity on shear capacity of RC eccentric beam-column joints	64
Fragility analysis of long-span lightweight steel structures subjected to combined earthquake and non-uniform snow loads	57
Monotonic and cyclic axial strengths of rectangular concrete columns circularized and retrofitted with low CFRP confinement	48
Web crippling design of lean duplex stainless steel tubular members at ambient and elevated temperatures	44
Full scale testing of ultra-high performance concrete closure joint for prefabricated full-depth precast concrete bridge deck panel system	37
Shear connector performance analysis for composite bridge deck with corrugated steel sheeting	36
Mechanical properties and stress-strain models of large diameter high-strength bolts	30
Response of different cementitious concrete target under ballistic impact loading	28
Experimental and numerical investigation on the behavior of composite reinforced concrete columns encased by steel section and hybrid GFRP section	26
Flexural behaviour of low-magnetic concrete beams reinforced with zero-magnetic steel bars	26
Structural modal parameter identification based on BeiDou satellite signals and an enhanced stochastic subspace method	25
A SMA-based sliding friction damper for enhancing the transverse seismic performance of isolated bridges	24
Interface debonding defect detection for CFST columns based on EMI measurements: Experiment, numerical simulation and blind inspection in practice	24
Interpretable machine learning models for predicting probabilistic axial buckling strength of steel circular hollow section members considering discreteness of geometries and material	23
Study on the parameters of steel plate reinforcement rib-deck crack considering local stress disturbances	22
Two young researchers Honoured with the 2025 J.M. Ko Award	21
Eliminating environmental temperature and humidity effects on the frequencies of bridges based on co-integration analysis	21
Probabilistic investigation of reinforced concrete structures under fire loading accounting for material and geometric uncertainties	20
Numerical simulation of blast resistance of reinforced concrete slabs under fire conditions	20
Study of the design and flexural performance of an innovative Fiber Reinforced Polymer/steel-concrete composite beam	17
Analytical study on the effects of flexural rigidity and negative stiffness in the optimal tuning of inerter-based damper for cable vibration mitigation	17

Fuzzy analytic hierarchy process-based safety assessment and resilience repair strategy of old district buildings	16
Performance assessment of post-tensioned concrete-filled steel tube beams using unbonded tendons with uncertainty quantification	16
A new constitutive model of shape memory alloy and its seismic mitigation capacity compared with existing models	16
Accurate rotation identification of flexural structures using long-gauge fiber optical sensors	16
Deep learning-driven forecasting of bridge thermal-induced structural response with feature engineering	15
Shear resistance test analysis and calculation method of shear capacity of UHPC-NC beam without web reinforcement	15
Experimental investigation on shear behavior of double-row perforated GFRP rib connectors in FRP-concrete hybrid beams	15
Effects of thermal cycles and time-dependent behavior of the deck on steel network arch bridges	15
Ductile hybrid FRP-steel-concrete coupling beams: Concept and behaviour	14
Low-cycle fatigue in ultra-high-strength steel welded joints in the as-welded and post-weld-treated conditions	14
Climate change intensifies bridge temperature: Evidence from 26 Years of monitoring data	14
Bending behavior and cracking resistance of UHPC wet joints in prefabricated multi-girder bridges	14
Experimental and finite element analysis: Out-of-plane mechanical performance of infill walls with flexible connection	14
Quantification of the seismic design coefficients for composite special moment frames with reinforced concrete columns and steel beams	13
Experiment and phase-field simulation of uniaxial compression of ultra-high-performance concrete with coarse aggregate	13
Vibration analysis of the continuous beam bridge considering the action of jump impacting	13
Modified fragility functions for offshore wind turbines considering soil-structure interaction subjected to wind, wave, and seismic loads	13
Seismic response of structures with friction pendulum inerter system (FPIS) under near-fault earthquakes	13
Train-bridge interaction under correlated wind and rain using machine learning	12
Response reconstruction based on measurement matrix optimization in compressed sensing for structural health monitoring	12
Effective temperature of railway concrete bridges in plateau regions based on long-term meteorological data	12
Study on the axial compressive behavior of FRP-confined seawater sea-sand concrete	12
Effect of tie column on the progressive collapse performance of infilled reinforced concrete frames	12
Structural performance and failure analysis of balsa and PET core carbon fiber sandwich structures	11
Modal parameter extraction from improved principal component analysis and structural state identification	11
Sensitivity analysis and probabilistic performance assessment of transmission tower-line systems subjected to downbursts	11
Experimental studies on the mechanical behaviors of cold-formed thin-walled steel-foam concrete composite walls	11
Shear performance and capacity of FRP reinforced concrete beams: Comprehensive review and design evaluation	11
Self-updating AutoML model for building properties prediction: A case study on building mass	11
Application of precast reinforced concrete fuse units as energy dissipation units in various self-centering precast bridge pier systems	10
Time-varying modal identification using multi-channel measurements based on multivariate variational mode decomposition	10
Application of NiTiNb shape memory alloys in the end region of prestressed concrete bridge girders	10
Sensitivity of structural responses to the processing of near-fault ground motion records containing fling-step	10
Multi-objective optimization of a sandwich structure with a hybrid composite grid core	10
Strength prediction and stochastic analysis of ultra-high performance concrete columns under the explosive blast load	10
Experimental and numerical study on polypropylene fibers reinforced concrete slabs with corroded reinforcement under monotonic loading	10
Thermal fatigue behavior of reinforced concrete column used as heater and energy storage	10
Experimental study on post-fire behaviour of a novel assembled wall-slab joint	10
Numerical study on aerodynamic characteristics and flow field of a circular cylinder equipped with a C-ring behind at Re = 1000	10
Axial compressive behavior of self-compacting micro-expansive high-strength concrete confined by glass fiber reinforced plastic tube	10
Experimental study on axial compression properties of concrete filled steel tubular stub columns in varying ambient temperature	10
Simulation of spatially varying non-stationary seismic waves using random frequencies and non-uniform fast fourier transform	10
Innovating arch structures with fiber-reinforced polymer composites: A review	10
A variable stiffness energy dissipation device for drift control of steel frames	10
Offshore wind turbine subjected to supershear earthquake ruptures	9
Experimental and theoretical research on the seismic performance of RC retaining wall strengthened with diagonal bracing	9
Two-Step Kriging-Based Finite Element Model Updating for a Scaled Cable-Stayed Bridge under Shake Table Tests	9
Push-out behavior of headed stud shear connectors in FRP-UHPC-steel double-skin tubular members (DSTMs)	9
Seismic response of a large, isolated aqueduct considering fluid–structure and soil–structure interactions	9
Vibration control and transmission mechanism of super high-rise building located on subway based on spring vibration isolation system	9

Development of large-scale synthetic 3D point cloud datasets for vision-based bridge structural condition assessment	9
Self-sensing nano-engineered ultra-high performance concrete (UHPC) under tension	9
Partial shear connections in demountable cold-formed composite beams with profiled steel sheeting	9
Flexural behavior and design of high-strength I-shaped steel-UHPC composite beams	9
Axially loaded square CFST columns strengthened with circular steel tubes and sandwiched concrete jackets	9
Optimizing vortex-induced vibration suppression in π-shaped girders using wind tunnel testing and CFD analysis	9
Capacity reinstatement of reinforced concrete one-way ribbed slabs with rib-cutting shear zone openings: Hybrid fiber reinforced polymer/steel technique	9
State-of-art review on load identification and response reconstruction to realize digital twin of infrastructures	9
Parallelized adaptive Bayesian updating with structural reliability methods for inference of large engineering models	9
Experimental and numerical study on flexural enhancement of reinforced self-compacting concrete beams through various strengthening approaches	9
Data enhancement for generative AI design of shear wall structures incorporating structural optimization and diffusion models	9
Fully automated natural frequency identification based on deep-learning-enhanced computer vision and power spectral density transmissibility	9
Nonlinear bond-slip model for fiber-reinforced polymer laminates externally bonded to thermally damaged concrete	9
Numerical parametric study on the uniaxial and biaxial compressive behavior of H-shaped steel reinforced concrete composite beam-columns	8
Image-based automatic multiple-defect detection of urban utility tunnel using UUTNet	8
Bridge performance degradation model based on the multi-variate bayesian dynamic linear method	8
Advanced image stitching method and evaluation for underwater structure inspection utilizing planar array cameras	8
Mechanical performance of square high-strength steel and high-strength concrete medium-long columns with built-in reinforcement cages under eccentric compression	8
Cross-sectional behaviour and design of normal and high strength steel welded I-sections under compression and uniaxial bending	8
Numerical investigations on a novel resilient energy dissipation damper for multi-level earthquakes	8
Flexural behavior of recycled aggregate concrete beams strengthened with carbon fiber reinforced polymer	8
A method for determining the ductile damage parameters of high strength steels and weld metal	8
Long-term shear performance of concrete beam with carbon fiber-reinforced composite grid stirrups under sustained loadings and seawater immersion	8
Experimental investigation on flexural behavior of prefabricated sandwich insulation wall panels with textile reinforced engineered cementitious composites as the wythes after freeze-thaw cycles	8
Influence of site conditions on seismic performance of isolated high-speed railroad bridges	8
Reproduction of seismic responses of wind turbine tower by hybrid tests considering shear and bending coupled boundary control	8
Unified prediction model for concrete strength based on progressive feature fusion and knowledge transfer	8
Color image segmentation based multilevel thresholding for detection of cracks and bug-holes in concrete surface images using optimization methods	8
Mesoscale modeling of flexural fracture behavior in steel fiber reinforced concrete	8
LES study on traveling wave wall control for the wake of flow around a 3D circular cylinder at high Reynolds number	8
Seismic performance of concrete-filled steel tube columns using ultra-high-strength steel under long-period ground motion demands	8
Photogrammetry-based bending monitoring and load identification of steel truss structures	8
Circular tube-in-tube dampers for seismic resilience of structures	8
Experimental and numerical investigation on seismic performance of semi-precast concrete sandwich shear wall	8
Study on the flexural performance and deflection calculation method of UHPC-NC hybrid beams with different parameters	8
VIV-SDE-Net: A physics-informed neural framework for long-horizon prediction of bridge vortex-induced vibrations	7
Performance analysis of the ultra high performance concrete composite beam subjected to impact loads	7
A comprehensive review on estimation of equivalent static wind loads on long-span roofs	7
Fire performance of insulated CFRP-strengthened RC beams with different anchorage systems: Experimental and numerical investigation	7
Damage detection of cables in cable-stayed bridges using vibration data measured from climbing robot	7
Wake characteristic and hanger vibration suppression by synthetic jets at the bridge tower corners	7
Analysis and design of a novel segmented energy absorbing steel plate shear wall system	7
Mechanical behavior of prestressed concrete cylinder pipe strengthened by prestressed CFRP subject to secondary load	7
Assessment of the damage caused by the 6 February 2023 earthquakes on old and new dated reinforced concrete buildings in Elbistan, Turkey	7
Study on the mechanical behaviour of multicell T-shaped concrete-filled steel tubular short columns under axial and eccentric compression	7
Seismic performance of the existing piloti-type masonry structure	7
Experimental study on the fatigue crack growth rates of welded ultra-high strength steel plates	7
High-fidelity reconstruction of wind pressure fields on connected super-high-rise structures using machine learning	7
A low computational cost seismic analyses framework for 3D tunnel-form building structures	7
Simulation and design model for reinforced concrete slabs with lacing systems	7
An automated load determination approach for concrete girder bridges through acoustic emission	7
Flexural behavior of fiber reinforced composites sandwich panels with a reused wooden core	7
Experimental investigation on the bond performance of sea sand coral concrete with FRP bar reinforcement for marine environments	7
Experimental and numerical approaches for evaluating steel fiber reinforced concrete beam column joints: A state-of-the-art review	7
Numerical and theoretical investigations on flexural behavior of two-way RC slabs strengthened with BFRP grid-ECC composites	7
Experimental investigation of the corrosion effect and repair effectiveness for an RC beam with the corroded stirrups	7
Experimental investigation on realistic model for local bond stress-slip relationship between ribbed GFRP bars and concrete	7
Seismic performance and force transition mechanism of stepped joints through experimental and numerical analyses	7
Data-driven convolutional neural network model with multi-channel input framework for predicting structural displacement response	7
A new deep learning-based approach for concrete crack identification and damage assessment	7
A modified softened truss model and strength prediction formula for fiber-reinforced polymer reinforced concrete members under pure torsion	7
Shear performance of stud connectors in steel-concrete composite bridges: A review	7
Thermal effect analysis of a steel truss cable-stayed bridge with two-layer decks under sunlight	7
Shaking table tests on seismic responses of offshore wind turbines considering fluid-soil coupling	6
Investigation of in-plane stability in bending-active arches	6
Flexural behavior of different types of steel-concrete composite decks with perfobond rib or head stud shear connectors	6
Research on automatic detection and analysis of concrete cracks based on deep convolutional neural network architecture	6
Time-dependent reliability assessment and optimal design of corroded reinforced concrete beams	6
Study on performance of various installation makeups of damped outrigger systems	6
Nonlinear tensile behavior of ±55˚ concrete-filled GFRP tubes: Experimental and theoretical studies	6
An experimental investigation on the hydrodynamic performance of floating bridge foundation with taut mooring system	6
A novel cepstrum-based and evolutionary optimization hybrid framework for structural parameter identification	6
Safety analysis of road vehicles overtake on cables-Stayed bridge under crosswinds	6
State-of-the-art review of machine learning applications for bridge inspections	6
Interference effects on two rectangular tall buildings with coupling bridge in close proximity	6
Bayesian model updating method based on multi-sampling strategy integration	6
Integrated AI-driven virtual reality framework for bridge inspection with multimodal NDT and remote sensing	6
Durability evaluation of binary and ternary concrete mixtures by corrosion resistance approach	6
Flexural repairing of highly corroded reinforced concrete structures with engineered cementitious composites (ECC)	6
In situ evaluation of strengthening methods for reinforced concrete T-beam bridge	6

Analysis of the explosion resistance of an I-shaped steel‒concrete composite structure under contact explosion	6
Experimental investigation on composite girders with CSW-CFST truss chords subjected to combined flexure and torsion	6
Web crippling design of modular construction optimised beams under interior-two-flange (ITF) loading	6
Cyclic loading tests and numerical simulations of an assembled X-shaped flexural steel damper	6
Mechanical evaluation on BFRP laminated bamboo lumber columns under eccentric compression	6
Experimental and numerical studies on the hot spot stress calculation method for welded CHS X-joints stiffened by internal ring stiffeners	6
Real-time monitoring of extrudability and buildability in 3D concrete printing based on target detection method	6
Corroded RC slabs retrofitted with FRP grid-reinforced ECC matrix composites	6
Subassemblage-based probabilistic damage and resilience assessment method for RC frame structure	6
Blade-tower clearance-based aerodynamic imbalance analysis and fault diagnosis of wind turbines	6
Bayesian-optimized unsupervised semantic segmentation model for structural crack detection	6
Buckling critical load prediction of pultruded fiber-reinforced polymer columns and feature analysis by machine learning	6
A review on environmental load identification and structural health monitoring of offshore structures	6
Interval field model construction of actual bridge with uncertain parameter based on a small number of test samples	6
Analysis of punching shear failure in connections between reinforced concrete slab and T-shaped steel reinforced concrete column	6
Integrating real traffic data for fatigue assessment of metallic railway bridges aided by digital twin technology	6
Numerical modelling and analysis of dowel shear connector for composite slim-floor beams	6
Punching shear failure behaviors of unbonded prestressed slab-column connections: Numerical investigation and code comparisons	6
Research on the flexural behavior of a novel inter-module connection with a bolt and shear key fitting for modular steel buildings	6
Hybrid strengthening of RC beams with externally bonded carbon fiber reinforced polymer laminate and engineered cementitious composites transition layer	6
Performance monitoring of assembled beam bridges using displacement spectrum similarity measure	6
Experimental and analytical approaches for load rating reinforced concrete slab bridge	5
Shear strengthening of RC beams with NSM FRP. I: Review of strength models	5
Calculation on flexural capacity of recycled aggregate concrete beams	5
Strengthening mechanism of steel tubed RC column joints with built-in section steel	5
Towards Developing Reinforced Concrete Structures Digital Twins: A Multiscale Lattice Discrete Particle Model Approach	5
Bridge component segmentation for health monitoring an enhanced DeepLabV3+ model with lightweight network and multi-scale channel attention mechanism	5
Bending, torsion and flexural-torsional buckling of back-to-back cold-formed steel channels	5
Corrigendum to “A method for uniform upgrading of isolated bridges with complex root devices”	5
Development and design of a deep tank damper with submerged suspended plate	5
Behavior and design of GFRP bar adhesive anchors under direct tension for deteriorated concrete bridge barrier replacement	5
Moving model experimental analysis of the slipstream produced by a simplistic square-back high-speed train	5
Structural damage identification under ambient temperature variations based on CNN and normalized modal flexibility-autoregressive coefficients hybrid index	5
Machine learning-based strain response prediction method for structural members of a building using ground motion data and intensity measures	5
Dynamic analysis of train and bridge in crosswinds based on a coupled wind-train-track-bridge model	5
Bayesian-guided operational modal identification of a highway bridge considering non-uniform sampling	5
Effects of damping and helical fillets on galloping vibration of stay cable installed with a rectangular lamp	5
Experimental investigation on seismic behaviors of precast concrete shear walls with sleeve grouting defects	5
Experimental study on shear performance of reinforced concrete beams under fire conditions	5
Temperature behavior of cable-stayed bridges. Part II — temperature actions by using unified analysis	5
Corrigendum to “A Transfer Learning-Driven Digital Twin Framework for Cross-Bridge Response Prediction in Regional Bridge Networks”	5
Soil-structure interaction in seismic response and structural performance: A systematic review	5
A Bayesian fusion approach for high-spatiotemporal-resolution measurement of structural vibration using vision-based and sparse-sensor data	5
A novel strategy for mitigating the vortex-induced vibration of long-span bridges by using flexible membranes	5
Torsional behavior of curved concrete box beam with small radius	5
Flexural-shear behavior of degraded RC beams strengthened with C-FRCM under the coupling effect of a corrosive environment and a sustained load	5
The shear-tensile strength of closed-type winding GFRP stirrups	5
Seismic control mechanism of tuned viscous mass damper (TVMD) outriggers	4
Uncertain seismic response and robustness analysis of isolated continuous girder bridges	4
Experimental and analytical study on eccentric compressive behavior of concrete columns strengthened with high-strength reinforcement of HRB600	4
Failure mechanism of FRP-steel bonded-bolted hybrid connections after seawater exposure	4
Analysis of temperature response in concrete box-girder bridges based on steel reinforcement thermal conductivity model	4
Effective range of base isolation design parameters to improve structural performance under far and near-fault earthquakes	4
Random analysis of train-bridge coupled system under non-uniform ground motion	4
Effect of size on the eccentric compression performance of damaged square RC columns strengthened with CFRP: An experimental study	4
Bolt-loosening detection using vision technique based on a gray gradient enhancement method	4
Efficient calculation of higher order time history response derivatives by substructuring method	4
Design and seismic performance analysis of a novel special-shaped steel tube concrete column steel beam joint	4
Track vibration sequence anomaly detection algorithm based on LSTM	4
An investigation into the buckling behaviour of hybrid fibre reinforced polymer-timber thin-walled C-section columns	4
Full-field displacement and strain reconstruction for beam structures based on the extended inverse finite element method	4
Uniaxial mechanical behaviors of recycled coarse aggregate concretes cast with conventional and equivalent mortar volume methods	4
Local bond-slip model between steel bars and concrete after exposure to high temperatures	4
Mechanical properties and environmental performance of seawater sea-sand self-compacting Concrete	4
Experimental study on mechanical properties of recycled glass fiber reinforced concrete column under uniaxial compression	4
Advanced landing gear fibre Bragg grating sensing and monitoring system	4
Effects of temperature on modal characteristics of non-uniform rigid-frame bridges	4
Study on axial compression bearing capacity of in-sulated sandwich concrete wall with embedded columns	4
A scientometric analysis of drone-based structural health monitoring and new technologies	4
Seismic performance of RC-ECC composite frame by eliminating shear reinforcement in beam-column joint: Shake table tests	4
Named entity recognition model for bridge inspection report with multi-features fusion and correction method	4
Neural network-based repair strategy for seismic resilience of building group considering indirect economic losses	4
Robustness of a tuned viscous mass damper (TVMD) controlled system	4
Reinforcement detailing of connections between perpendicular hollow precast walls	4
Experimental and numerical analysis on the post-fire flexural behavior of aluminum alloy gusset joints	4
The experimental and numerical simulation of interface shear behavior between ECC and coal gangue concrete	4
Anti-slip friction resistance of main cable′s pin-connected and straddle-type clamps in suspension bridges: Analytical models and FEM validation	4
Perception and analysis of dynamic stiffness of cable-stayed bridges based on wave analysis	4
Signal complexity approach based investigation of flutter instability in sectional models of bridges in wind tunnel	4
Experimental and numerical study on seismic behavior of reinforced concrete shear walls with bulging-induced defects	4
Bond between single and bundled high-modulus ribbed GFRP bars with short embedment lengths and concrete	4
Temperature-based structural identification of long-span bridges using InSAR observation and meteorological shared data	4
Data-driven axial bearing capacity analysis of steel tubes infilled with rubberized alkali-activated concrete	4
Axle-information-free identification of vehicle moving forces from bridge displacement using U-Net	4
Analysis of the seismic performance of a large underground station structure in complex stratum considering the influence of axial force	4
Axial load ratio and limit for ductility design of steel fiber-reinforced concrete composite shear walls	4
Effects of material property and thickness on block shear strength in lean duplex stainless steel welded connections	4
Experimental and numerical study on residual stress distributions in welded H-sections of High-strength steel	4
Stress-strain behaviour of carbon fibre reinforced polymer-confined concrete containing macro fibres recycled from waste glass fibre reinforced polymer	4
Data-driven reliability-based optimization framework for concrete-encased steel composite columns toward cost-effective design: Methodology and interactive tool	4
Enhancing the interfacial bond performance of engineered cementitious composites and concrete	4
Pull-in capacity of unfilled T-connections using Bambusa blumeana bamboo	4
CrackGAN: Generative adversarial networks based predictive visualization mechanism of crack propagation in RC bridge elements	4
Damage-based strength reduction factor spectra of structures subjected to bidirectional ground motions	4
Effects of near-fault pulse-like and non-pulse-like seismic excitations on the structural response of steel high-rise buildings with buckling restrained braces	4