Advances in Structural Engineering

Article	Citations
Web crippling design of lean duplex stainless steel tubular members at ambient and elevated temperatures	169
Full scale testing of ultra-high performance concrete closure joint for prefabricated full-depth precast concrete bridge deck panel system	85
Fragility analysis of long-span lightweight steel structures subjected to combined earthquake and non-uniform snow loads	63
Examination of the beam eccentricity on shear capacity of RC eccentric beam-column joints	59
Mechanical properties and stress-strain models of large diameter high-strength bolts	55
Structural modal parameter identification based on BeiDou satellite signals and an enhanced stochastic subspace method	46
A SMA-based sliding friction damper for enhancing the transverse seismic performance of isolated bridges	39
Interface debonding defect detection for CFST columns based on EMI measurements: Experiment, numerical simulation and blind inspection in practice	34
Strain-path-dependent stress–strain model for ultrahigh-performance concrete columns constrained by stirrups	34
Experimental and numerical investigation on the behavior of composite reinforced concrete columns encased by steel section and hybrid GFRP section	34
Recent progress in buckling restrained braces: A review on material development and selection	31
Experimental and numerical study on mechanical behavior of high-strength lockbolted friction grip connections	31
An image-based bridge displacement field measurement method with self-vibration elimination	29
Monotonic and cyclic axial strengths of rectangular concrete columns circularized and retrofitted with low CFRP confinement	29
Test and development of SMA-based negative stiffness isolation device	28
Response of different cementitious concrete target under ballistic impact loading	26
Shear connector performance analysis for composite bridge deck with corrugated steel sheeting	25
Accurate rotation identification of flexural structures using long-gauge fiber optical sensors	24
A deep learning-based interferometric synthetic aperture radar framework for abnormal displacement deformation prediction of bridges	24
Eliminating environmental temperature and humidity effects on the frequencies of bridges based on co-integration analysis	21
Performance assessment of post-tensioned concrete-filled steel tube beams using unbonded tendons with uncertainty quantification	21
Interpretable machine learning models for predicting probabilistic axial buckling strength of steel circular hollow section members considering discreteness of geometries and material	20
Study on the parameters of steel plate reinforcement rib-deck crack considering local stress disturbances	20
Study of the design and flexural performance of an innovative Fiber Reinforced Polymer/steel-concrete composite beam	20
Effects of thermal cycles and time-dependent behavior of the deck on steel network arch bridges	19

Some observations on energy demand spectra for single-degree-of-freedom systems equipped with fluid viscous dampers	19
Experimental and finite element analysis: Out-of-plane mechanical performance of infill walls with flexible connection	18
Experimental investigation on shear behavior of double-row perforated GFRP rib connectors in FRP-concrete hybrid beams	17
Shear resistance test analysis and calculation method of shear capacity of UHPC-NC beam without web reinforcement	17
Probabilistic investigation of reinforced concrete structures under fire loading accounting for material and geometric uncertainties	17
Climate change intensifies bridge temperature: Evidence from 26 Years of monitoring data	17
Self-updating AutoML model for building properties prediction: A case study on building mass	16
A new constitutive model of shape memory alloy and its seismic mitigation capacity compared with existing models	16
Analytical study on the effects of flexural rigidity and negative stiffness in the optimal tuning of inerter-based damper for cable vibration mitigation	16
Numerical simulation of blast resistance of reinforced concrete slabs under fire conditions	16
Deep learning-driven forecasting of bridge thermal-induced structural response with feature engineering	16
Seismic response of structures with friction pendulum inerter system (FPIS) under near-fault earthquakes	16
Low-cycle fatigue in ultra-high-strength steel welded joints in the as-welded and post-weld-treated conditions	15
Modal parameter extraction from improved principal component analysis and structural state identification	15
Axial compressive behavior of self-compacting micro-expansive high-strength concrete confined by glass fiber reinforced plastic tube	15
Experimental studies on the mechanical behaviors of cold-formed thin-walled steel-foam concrete composite walls	14
A novel joint sparse regularization model to structural damage identification by the generalized fused lasso penalty	14
Strength prediction and stochastic analysis of ultra-high performance concrete columns under the explosive blast load	14
Shear performance and capacity of FRP reinforced concrete beams: Comprehensive review and design evaluation	14
Response reconstruction based on measurement matrix optimization in compressed sensing for structural health monitoring	14
Penetration trajectory of rigid projectile in the heterogeneous meso-scale concrete target	14
Quantification of the seismic design coefficients for composite special moment frames with reinforced concrete columns and steel beams	14
Modified fragility functions for offshore wind turbines considering soil-structure interaction subjected to wind, wave, and seismic loads	13
Vibration analysis of the continuous beam bridge considering the action of jump impacting	13
A variable stiffness energy dissipation device for drift control of steel frames	13
Sensitivity analysis and probabilistic performance assessment of transmission tower-line systems subjected to downbursts	13
Numerical study on aerodynamic characteristics and flow field of a circular cylinder equipped with a C-ring behind at Re = 1000	13
Train-bridge interaction under correlated wind and rain using machine learning	13
Experiment and phase-field simulation of uniaxial compression of ultra-high-performance concrete with coarse aggregate	13
Effect of tie column on the progressive collapse performance of infilled reinforced concrete frames	13
Experimental study on post-fire behaviour of a novel assembled wall-slab joint	13
Push-out behavior of headed stud shear connectors in FRP-UHPC-steel double-skin tubular members (DSTMs)	12
Experimental and numerical study on polypropylene fibers reinforced concrete slabs with corroded reinforcement under monotonic loading	12
Study on mechanical properties of seawater sea-sand coral aggregate concrete-filled BFRP tubular arches	12
Experimental study on axial compression properties of concrete filled steel tubular stub columns in varying ambient temperature	12
Two-Step Kriging-Based Finite Element Model Updating for a Scaled Cable-Stayed Bridge under Shake Table Tests	12
Flexural behavior and design of high-strength I-shaped steel-UHPC composite beams	12
Thermal fatigue behavior of reinforced concrete column used as heater and energy storage	12
Offshore wind turbine subjected to supershear earthquake ruptures	12
Mechanical properties of plate type steel bar connectors for prefabricated concrete structures	11
Sensitivity of structural responses to the processing of near-fault ground motion records containing fling-step	11
Experimental and numerical study on flexural enhancement of reinforced self-compacting concrete beams through various strengthening approaches	11
Seismic response of a large, isolated aqueduct considering fluid–structure and soil–structure interactions	11
Experimental and theoretical research on the seismic performance of RC retaining wall strengthened with diagonal bracing	11
State-of-art review on load identification and response reconstruction to realize digital twin of infrastructures	11
Two-stage damage identification method based on fractal theory and whale optimization algorithm	11
Data enhancement for generative AI design of shear wall structures incorporating structural optimization and diffusion models	11
Simulation of spatially varying non-stationary seismic waves using random frequencies and non-uniform fast fourier transform	11
Innovating arch structures with fiber-reinforced polymer composites: A review	11
Time-varying modal identification using multi-channel measurements based on multivariate variational mode decomposition	11

Axially loaded square CFST columns strengthened with circular steel tubes and sandwiched concrete jackets	11
Application of NiTiNb shape memory alloys in the end region of prestressed concrete bridge girders	10
Experimental study on carbonation behavior of seawater sea sand recycled aggregate concrete	10
Multi-objective optimization of a sandwich structure with a hybrid composite grid core	10
Seismic performance of concrete-filled steel tube columns using ultra-high-strength steel under long-period ground motion demands	10
Fully automated natural frequency identification based on deep-learning-enhanced computer vision and power spectral density transmissibility	10
Optimizing vortex-induced vibration suppression in π-shaped girders using wind tunnel testing and CFD analysis	10
LES study on traveling wave wall control for the wake of flow around a 3D circular cylinder at high Reynolds number	10
Application of precast reinforced concrete fuse units as energy dissipation units in various self-centering precast bridge pier systems	10
Bridge modal identification based on successive variational mode decomposition using a moving test vehicle	10
Parallelized adaptive Bayesian updating with structural reliability methods for inference of large engineering models	10
A method for determining the ductile damage parameters of high strength steels and weld metal	10
A combination of genetic algorithm and dynamic relaxation method for practical form-finding of tensegrity structures	9
Vibration control and transmission mechanism of super high-rise building located on subway based on spring vibration isolation system	9
Capacity reinstatement of reinforced concrete one-way ribbed slabs with rib-cutting shear zone openings: Hybrid fiber reinforced polymer/steel technique	9
Nonlinear bond-slip model for fiber-reinforced polymer laminates externally bonded to thermally damaged concrete	9
Color image segmentation based multilevel thresholding for detection of cracks and bug-holes in concrete surface images using optimization methods	9
Study on the flexural performance and deflection calculation method of UHPC-NC hybrid beams with different parameters	9
Flexural behavior of recycled aggregate concrete beams strengthened with carbon fiber reinforced polymer	9
Numerical investigations on a novel resilient energy dissipation damper for multi-level earthquakes	9
Analytical model on progressive collapse resistance of prestressed precast concrete frame under middle column removal scenario	9
Image-based automatic multiple-defect detection of urban utility tunnel using UUTNet	9
Experimental investigation on flexural behavior of prefabricated sandwich insulation wall panels with textile reinforced engineered cementitious composites as the wythes after freeze-thaw cycles	9
Long-term shear performance of concrete beam with carbon fiber-reinforced composite grid stirrups under sustained loadings and seawater immersion	9
Mechanical performance of square high-strength steel and high-strength concrete medium-long columns with built-in reinforcement cages under eccentric compression	9
Experimental and numerical investigation on seismic performance of semi-precast concrete sandwich shear wall	9
Photogrammetry-based bending monitoring and load identification of steel truss structures	9
Influence of site conditions on seismic performance of isolated high-speed railroad bridges	8
Development of large-scale synthetic 3D point cloud datasets for vision-based bridge structural condition assessment	8
Advanced image stitching method and evaluation for underwater structure inspection utilizing planar array cameras	8
Data-driven convolutional neural network model with multi-channel input framework for predicting structural displacement response	8
Experimental investigation on behavior of splicing glass fiber–reinforced polymer-concrete–steel double-skin tubular columns under axial compression	8
Study on the mechanical behaviour of multicell T-shaped concrete-filled steel tubular short columns under axial and eccentric compression	8
Modified truncated singular value decomposition method for moving force identification	8
Self-sensing nano-engineered ultra-high performance concrete (UHPC) under tension	8
Comparative nonlinear seismic analysis of an existing RC bridge designed with obsolete codes	8
A new deep learning-based approach for concrete crack identification and damage assessment	8
Wake characteristic and hanger vibration suppression by synthetic jets at the bridge tower corners	8
Seismic performance of the existing piloti-type masonry structure	8
An automated load determination approach for concrete girder bridges through acoustic emission	8
Bridge performance degradation model based on the multi-variate bayesian dynamic linear method	8
Numerical parametric study on the uniaxial and biaxial compressive behavior of H-shaped steel reinforced concrete composite beam-columns	8
Mesoscale modeling of flexural fracture behavior in steel fiber reinforced concrete	8
Cross-sectional behaviour and design of normal and high strength steel welded I-sections under compression and uniaxial bending	8
Numerical and theoretical investigations on flexural behavior of two-way RC slabs strengthened with BFRP grid-ECC composites	8
Punching shear failure behaviors of unbonded prestressed slab-column connections: Numerical investigation and code comparisons	7
Nonlinear tensile behavior of ±55˚ concrete-filled GFRP tubes: Experimental and theoretical studies	7
An experimental investigation on the hydrodynamic performance of floating bridge foundation with taut mooring system	7
Interval field model construction of actual bridge with uncertain parameter based on a small number of test samples	7
Experimental and numerical approaches for evaluating steel fiber reinforced concrete beam column joints: A state-of-the-art review	7
A low computational cost seismic analyses framework for 3D tunnel-form building structures	7
Experimental investigation of the corrosion effect and repair effectiveness for an RC beam with the corroded stirrups	7
Assessment of the damage caused by the 6 February 2023 earthquakes on old and new dated reinforced concrete buildings in Elbistan, Turkey	7
A modified softened truss model and strength prediction formula for fiber-reinforced polymer reinforced concrete members under pure torsion	7
Analysis and design of a novel segmented energy absorbing steel plate shear wall system	7
A novel cepstrum-based and evolutionary optimization hybrid framework for structural parameter identification	7
Analysis of punching shear failure in connections between reinforced concrete slab and T-shaped steel reinforced concrete column	7
Cyclic loading tests and numerical simulations of an assembled X-shaped flexural steel damper	7
Flexural behavior of fiber reinforced composites sandwich panels with a reused wooden core	7
Experimental investigation on composite girders with CSW-CFST truss chords subjected to combined flexure and torsion	7
Review on seismic resilient bridge structures	7
Experimental investigation on realistic model for local bond stress-slip relationship between ribbed GFRP bars and concrete	7
Damage detection of cables in cable-stayed bridges using vibration data measured from climbing robot	7
Circular tube-in-tube dampers for seismic resilience of structures	7
Reproduction of seismic responses of wind turbine tower by hybrid tests considering shear and bending coupled boundary control	7
Guest editorial	7
Mechanical behavior of prestressed concrete cylinder pipe strengthened by prestressed CFRP subject to secondary load	7
Numerical modelling and analysis of dowel shear connector for composite slim-floor beams	7
Reinforcing effect of polyurea resin coating on RC members subject to low-speed and medium-speed impact	7
Preliminary investigation on the bending capacity of a novel connection between the concrete slab and steel beam	7
Performance analysis of the ultra high performance concrete composite beam subjected to impact loads	7
Seismic performance and force transition mechanism of stepped joints through experimental and numerical analyses	7
A comprehensive review on estimation of equivalent static wind loads on long-span roofs	7
Experimental study on the fatigue crack growth rates of welded ultra-high strength steel plates	7
A modified space truss analogy model for ultimate torsional capacity of ultra-high-performance concrete solid and box beams	7
Simulation and design model for reinforced concrete slabs with lacing systems	7
Study of flexural wave propagation through a cable stayed beam subjected to a moving load	7
Research on the flexural behavior of a novel inter-module connection with a bolt and shear key fitting for modular steel buildings	6
Mechanical evaluation on BFRP laminated bamboo lumber columns under eccentric compression	6
Subassemblage-based probabilistic damage and resilience assessment method for RC frame structure	6

Flexural behavior of different types of steel-concrete composite decks with perfobond rib or head stud shear connectors	6
Bayesian model updating method based on multi-sampling strategy integration	6
Buckling critical load prediction of pultruded fiber-reinforced polymer columns and feature analysis by machine learning	6
Shear performance of stud connectors in steel-concrete composite bridges: A review	6
State-of-the-art review of machine learning applications for bridge inspections	6
Research on automatic detection and analysis of concrete cracks based on deep convolutional neural network architecture	6
Experimental and numerical studies on the hot spot stress calculation method for welded CHS X-joints stiffened by internal ring stiffeners	6
Durability evaluation of binary and ternary concrete mixtures by corrosion resistance approach	6
Seismic performance of a continuous bridge with winding rope device activated by a fluid viscous damper	6
Corroded RC slabs retrofitted with FRP grid-reinforced ECC matrix composites	6
Time-dependent reliability assessment and optimal design of corroded reinforced concrete beams	6
Temperature behavior of cable-stayed bridges. Part II — temperature actions by using unified analysis	6
Performance monitoring of assembled beam bridges using displacement spectrum similarity measure	6
Real-time monitoring of extrudability and buildability in 3D concrete printing based on target detection method	6
Thermal effect analysis of a steel truss cable-stayed bridge with two-layer decks under sunlight	6
Study on performance of various installation makeups of damped outrigger systems	6
Analysis of the explosion resistance of an I-shaped steel‒concrete composite structure under contact explosion	6
Hybrid strengthening of RC beams with externally bonded carbon fiber reinforced polymer laminate and engineered cementitious composites transition layer	6
Safety analysis of road vehicles overtake on cables-Stayed bridge under crosswinds	6
Shaking table tests on seismic responses of offshore wind turbines considering fluid-soil coupling	6
Bayesian-optimized unsupervised semantic segmentation model for structural crack detection	6
The shear-tensile strength of closed-type winding GFRP stirrups	6
Blade-tower clearance-based aerodynamic imbalance analysis and fault diagnosis of wind turbines	6
An improved micro model for stochastic traffic load simulation with consideration of axle load and microscopic behavior	6
Experimental investigation on the bond performance of sea sand coral concrete with FRP bar reinforcement for marine environments	6
Web crippling design of modular construction optimised beams under interior-two-flange (ITF) loading	6
Investigation of in-plane stability in bending-active arches	6
Interference effects on two rectangular tall buildings with coupling bridge in close proximity	6
Corrigendum to “A method for uniform upgrading of isolated bridges with complex root devices”	5
An investigation into the buckling behaviour of hybrid fibre reinforced polymer-timber thin-walled C-section columns	5
Experimental and numerical study on residual stress distributions in welded H-sections of High-strength steel	5
Soil-structure interaction in seismic response and structural performance: A systematic review	5
Study on axial compression bearing capacity of in-sulated sandwich concrete wall with embedded columns	5
Structural damage identification under ambient temperature variations based on CNN and normalized modal flexibility-autoregressive coefficients hybrid index	5
Experimental and numerical analysis on the post-fire flexural behavior of aluminum alloy gusset joints	5
Bayesian-guided operational modal identification of a highway bridge considering non-uniform sampling	5
Adding composite truss to improve mechanical properties of reinforced concrete T-girder bridge	5
Effects of damping and helical fillets on galloping vibration of stay cable installed with a rectangular lamp	5
Interface bond strength performance of overlap joints within the corrugated pipes used in prefabricated bridges	5
Robustness of a tuned viscous mass damper (TVMD) controlled system	5
Efficient calculation of higher order time history response derivatives by substructuring method	5
Shear strengthening of RC beams with NSM FRP. I: Review of strength models	5
A novel XGBoost-based model to accurately predict envelope and modeling parameters for rectangular RC columns	5
Strengthening mechanism of steel tubed RC column joints with built-in section steel	5
Spatial characteristics of temperature effects on a long-span steel box girder suspension Bridge	5
Bridge component segmentation for health monitoring an enhanced DeepLabV3+ model with lightweight network and multi-scale channel attention mechanism	5
Seismic performance of RC-ECC composite frame by eliminating shear reinforcement in beam-column joint: Shake table tests	5
Failure mechanism of FRP-steel bonded-bolted hybrid connections after seawater exposure	5
Influence of earthquake-induced hydrodynamic pressure on train-bridge interactions based on back-propagation neural network	5
Damage degree identification of offshore platform structure based on KPCA-HKELM under environmental interference	5
Bending, torsion and flexural-torsional buckling of back-to-back cold-formed steel channels	5
Experimental and analytical approaches for load rating reinforced concrete slab bridge	5
Torsional behavior of curved concrete box beam with small radius	5
Dynamic analysis of train and bridge in crosswinds based on a coupled wind-train-track-bridge model	5
Towards Developing Reinforced Concrete Structures Digital Twins: A Multiscale Lattice Discrete Particle Model Approach	5
Effective range of base isolation design parameters to improve structural performance under far and near-fault earthquakes	5
Enhancing the interfacial bond performance of engineered cementitious composites and concrete	5
Experimental investigation on seismic behaviors of precast concrete shear walls with sleeve grouting defects	5
Failure-mode–independent prediction model for the peak strength of reinforced concrete columns using Bayesian neural network: A probabilistic approach	5
A novel strategy for mitigating the vortex-induced vibration of long-span bridges by using flexible membranes	5
An improved multi-mode seismic vibration control method using multiple tuned mass dampers	5
Axial load ratio and limit for ductility design of steel fiber-reinforced concrete composite shear walls	5
Calculation on flexural capacity of recycled aggregate concrete beams	5
Perception and analysis of dynamic stiffness of cable-stayed bridges based on wave analysis	5
Machine learning-based strain response prediction method for structural members of a building using ground motion data and intensity measures	5
Effect of size on the eccentric compression performance of damaged square RC columns strengthened with CFRP: An experimental study	5
Development and design of a deep tank damper with submerged suspended plate	5
Moving model experimental analysis of the slipstream produced by a simplistic square-back high-speed train	5
Flexural repairing of highly corroded reinforced concrete structures with engineered cementitious composites (ECC)	5
Behavior and design of GFRP bar adhesive anchors under direct tension for deteriorated concrete bridge barrier replacement	5
Punching shear behaviour of geopolymer concrete two-way slabs reinforced by FRP bars under monotonic and cyclic loadings	5
Structural analysis of assembly steel frames considering rotational deformation of external extended end-plate connection components	5
Secondary debris resulting from concrete slabs subjected to contact detonations	5
Collapse fragility of structures subjected to basin amplified ground motion: Influence of basin parameters	5
Experimental study on shear performance of reinforced concrete beams under fire conditions	5
Buffeting analysis of long-span twin-box cable-stayed bridge during construction	5