Journal of Porous Materials

Papers
(The median citation count of Journal of Porous Materials is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Preparation of monodispersed mesoporous silica using imidazolium ionic liquids under a neutral condition107
Synthesis and characterization of mesoporous expanded graphite modified with PA/H3PO4 for enhanced oil sorption efficiency82
Diphenyl phosphate hyper-cross-linked porous polymers for effective iodine capture70
Hierarchical β zeolite by post-synthesis and direct synthesis: enhanced catalytic performance on the conversion of ethanol to 1,3-butadiene69
Developing new strategies for template-free synthesis of penta-coordinated Al3+ γ-Al2O3 with different morphologies using glycothermal modification48
Green and facile synthesis of binder-free shaped EU-1 zeolite and its application in n-hexane cracking48
Evaluation of PET-derived metal organic frameworks (MOFs) for water adsorption and heat storage37
Thermal conductivity of macroporous graphene aerogel measured using high resolution comparative infrared thermal microscopy33
A facile low-cost method for fabricating water-based aerogel reinforced by calcium silicate waste with enhanced mechanical properties33
Facile synthesis of copper sulfide loaded mesoporous organosilica nanospheres with a triple-shelled hollow structure32
Application of acid-treated bentonite in catalytic synthesis of alkylated diphenylamine31
A new copper complex of lysine on mesoporous KIT-6 as a robust and homoselective catalyst in the synthesis of tetrazoles28
Research on thermal insulation performance and application simulation of high-temperature vacuum insulation panel27
Synthesis of pegylated metal phthalocyanines, incorporation in hierarchically porous carbon monoliths and evaluation as heterogeneous catalysts27
Direct thermal reduction of Ni/Hβ and its improved catalytic performance with stability in hydroalkylation of benzene24
Multifunctional nanocarriers: enhanced doxorubicin release from CQD-tagged SBA-15 silica nanoparticles23
Fabrication of MOF-derived Ce–Cu nanofibers for ameliorating photo-catalytic properties22
Exploring modern developments in diverse 2D photocatalysts for water oxidation21
Controllable synthesis of porous N-doped carbons using aniline and Pluronic F127 micellar system for hydrogen storage and electrochemical applications20
Hyperbranched polyethyleneimine functionalized porous polyacrylonitrile/graphene oxide nanofiber membrane for adsorption and reduction of Au(III)20
Development of polyimide aerogel stock shapes through polyimide aerogel particles20
Effect of dealloying temperature on microstructure and tensile properties of self-supporting nanoporous copper foil fabricated in situ19
Fabrication of PEDOT microtubes wrapped into honeycomb chitosan beads for atmospheric water harvesting19
Green synthesized AgNPs using Clitoria ternatea extract and its confinement on SBA-15/GPTMS-TAEA for controlled drug release of ciprofloxacin19
Porous walnut-like Mn2O3 anode derived from the waste graphene production effluent18
Doping effects on mechanical properties of nanoporous gold systems17
Phosphotungstic acid modified sulphonic acid functionalised SBA-15: exploring the synergistic effect for thermal and light assisted synthesis of bis(indolyl)methanes17
The porous composite BN@SHS made of boron nitride, silica hollow spheres and Si–O–B interface17
Preparation of superhydrophobic cellulose aerogel sponge from waste paper and its application in oil-water separation17
In-situ iron modified mesoporous silica MCM-48 for electrochemical energy storage applications17
Steam reforming of methane on Ni/La-SBA-15 with high hydrothermal stability16
Influence of aging on textural properties and symmetry of K-zeolites synthesized via a green route from waste pumice16
Petroleum asphaltene-derived highly porous carbon for the efficient removal of pharmaceutical compounds in water16
CoII immobilized on aminated mesoporous SBA-16 (SBA-16/GPTMS-NH2–CoII): a highly efficient mesostructured catalyst for the C–O bond formation under solvent-free conditions16
SBA-15 and carbon supported nickel, heteropoly acid catalysts for the hydrodeoxygenation of lignin derived trans-anethole to sustainable aviation fuel15
Noninvasive in-vivo human split-faced clinical investigation of nonanedioic acid loaded mesoporous silica nanoparticles immersed gel: revolutionizing cutaneous translational and cosmetical application15
The mesoporous silicate-alumina composites application as supports for bifunctional sulfide catalysts for n-hexadecane hydroconversion14
Preparation of acrylamide-urea composite hydrogels based on deep eutectic solvents and their self-healing and pressure-sensitive properties14
The catalytic reactivity of titanium dioxide supported on SBA-15 catalyst for selective oxidation of benzyl alcohol14
Synthesis, characterization and application development of ordered mesoporous silica in wastewater remediation14
The honeysuckle stem derived porous carbon with an ultra-high specific surface area and ultra-long cycle life14
Preparation of foam material via co-sintering of NaCl and PTFE for oil/water separation14
RETRACTED ARTICLE: Recent progress in doping-induced structural and electronic modification in Cu–SnCo interconnected network enhanced efficient performance evidence for the hydrogen evolution reactio14
Synthesis of nano-sized H-ZSM-5 zeolite aggregates by modified seed-induced method and their catalytic performance in methanol to propylene reaction14
Green water-based fabrication of SiO2–TiO2 aerogels with superhydrophobic and photocatalytic properties and their application on cotton fabric14
Layered zinc hydroxide as vehicle for drug delivery systems: a critical review13
Amine-functionalized and non-functionalized mesoporous silica nanoparticles as the delivery system for tertiary butylhydroquinone (TBHQ)13
Flexible superhydrophobic fabric with electromagnetic interference shielding based on MXene and cellulose nanofibers13
Acid treatment to adjust zeolite hydrophobicity for olefin hydration reaction13
Zinc Modified Hierarchical ZSM-5 for Aromatisation of Propane13
The way to enhance SAPO-34 activity and stability in methanol-to-olefin conversion13
Mesoporous SBA-15@n-Pr-THAM-ZrO organic–inorganic hybrid: as a highly efficient reusable nanocatalyst for the synthesis of polyhydroquinolines and 2,3-dihydroquinazolin-4 (1h)-ones13
Efficient conversion of light paraffinic naphtha to aromatics over metal-modified Mo/MFI catalysts13
Magnetic hydroxyethyl cellulose spheres with efficient congo red removal13
Reduced graphene oxide modified porous alumina substrate as an electrode material for efficient capacitive deionization13
Improving the rate capability of microporous activated carbon-based supercapacitor electrodes using non-porous graphene oxide12
Synthesis and characterization of cobalt nanoparticles containing anionic polymer hydrogel nanocomposite catalysts for fast reduction of nitrocompounds in water12
Green heterogeneous catalysts for cleaner solvent-free production of acetates12
Formation of polymeric filtration membranes by the combination of emulsion and breath figures approach12
ROS/GSH dual-responsive selenium-containing mesoporous silica nanoparticles for drug delivery12
New low-cost and compact experimental system for characterization of porous materials by quasi-equilibrated thermodesorption of nonane or water12
Lotus leaf-derived capacitive carbon for zinc-ion hybrid supercapacitors prepared by one-step molten salt carbonization12
Influence of catalyst support type on silver poplar pyrolysis vapors: a Py/GC-MS study12
Study of amino-modified resorcinol-formaldehyde aerogels for odorous gas removal12
Preparation and characterization of Superhydrophilic TiO2-SiO2 films for double-layer broadband antireflective coating12
Synthesis of CHA from MFI by three interzeolite transformation strategies and its application in NH3-SCR reaction12
Synthesis of SiO2-stabilized FeMn catalysts for catalytic production of liquid fuels: effect of SiO2 position over bimetallic catalysts12
Copper(II) nitrate and Copper(II) oxide loading on ZIF-8; synthesis, characterization and antibacterial activity12
Variation of structural properties of silica aerogels over more than one order of magnitude—opportunities, challenges and limits11
Immobilization of palladium on benzimidazole functionalized mesoporous silica nanoparticles: catalytic efficacy in Suzuki–Miyaura reaction and nitroarenes reduction11
Efficient degradation of tetracycline by activating Cu doped CoCO3@nickel foam of porous architecture with persulfate11
New CeO2–TiO2, WO3–TiO2 and WO3–CeO2–TiO2 mesoporous aerogel catalysts for the low temperature selective catalytic reduction of NO by NH311
Functionalized MCM-41 based recyclable catalyst (MCM-41@CP@PAL@Cu) for the epoxidation of alkenes using tert-BuOOH11
Biomass-derived inherently doped multifunctional hierarchically porous carbon as an efficient electrode material for high-performance supercapacitors11
Ga(Nb,Ta)SiBEA zeolites prepared by two-step postsynthesis method: acid–base characteristics and catalytic performance in the dehydrogenation of propane to propylene with CO211
Preparation and structure of silicon oxycarbide aerogels fabricated by polymer derived ceramics method11
Effect of the Ag–CeO2 interaction and the nature of pore structure on the catalytic activities of different Ag–CeO2/mesoporous-SiO2 catalysts on the reduction of 4-nitrophenol10
Synthesis of ultra-small NaA zeolite nanocrystals at near room temperature10
Facile and eco-friendly synthesis of chitosan-based mesoporous carbon for adsorbent10
A procedure to synthesize silica aerogels in a wide range of densities by a single-step base catalyzed recipe10
Reversible thermochromic behavior and mechanism of Congo red/palygorskite nanohybrid induced by mechanochromism10
Red-fleshed pitaya peels (Hylocereus polyrhizus) as a biosorbent for removal of hormone 17α-methyltestosterone in aqueous medium10
Effect of alkaline-acid treatment on the physicochemical properties of ferrierite zeolite with application in the catalytic cracking reactions of n-hexane and UHMWPE10
A green route to synthesize HZSM-5 zeolites for the coreaction of n-heptane and methanol to light olefins10
Sulfur dioxide removal by calcium-modified fibrous KCC-1 mesoporous silica: kinetics, thermodynamics, isotherm and mass transfer mechanism10
Hierarchical macro-mesoporous Mo/Al2O3 catalysts prepared by dual-template method for oxidative desulfurization10
Adsorption characteristics of hexadecyl ammonium with different numbers of carbon chains in montmorillonite and the structure of the prepared composites10
Synthesis and excellent catalytic properties of hierarchical ZSM-5 zeolite by organosilanized doubleterminal amino polyetheramine template method10
Effects of Ti and Al incorporation on the performance of FSM-16 supported nickel catalyst in dry reforming of methane10
Epoxidation of alkene using bi-functional metal oxide supported SBA-16 catalyst10
Nitrogen-doped porous carbon microsphere with high surface area for supercapacitors and capacitive deionization10
Zinc oxide quantum dots/graphitic carbon nitride nanosheets based visible-light photocatalyst for efficient tetracycline hydrochloride degradation9
A facile on-site colorimetric solid-state sensing of Cu2+ using chelating receptor immobilized porous polymer monolith material9
Integrated gas expansion and activation strategy to prepare shaddock peel-derived nitrogen doped honeycomb carbon for high performance supercapacitor9
Addition of polyethylene glycol for the synthesis of anatase-free TS-1 zeolites with excellent catalytic activity in 1-hexene epoxidation9
Generation of bioactive porous chitosan/gelatin based scaffold modified with tri-calcium phosphate/nano-bioglass for bone tissue engineering applications9
Optimized preparation of thermal insulation hydrophobic SiO2 aerogel based on orthogonal design method9
Efficient bacterial capture by amino-functionalized cellulose monolith9
Facile, tunable, and environmental friendly synthesis of silica/resorcinol–formaldehyde hybrid xerogels with ultra-low shrinkage using a cationic polyelectrolyte as a soft template9
Catalytic performance of HPW/TiO2–SnO2–ZrO2 in soybean oil epoxidation under hydrodynamic cavitation9
Mesoporous SBA-15 supported Ru nanoparticles for effective hydrogenation of ethyl levulinate at room temperature9
Highly-dispersed Pd nanoparticles on UiO-66 in assistance of supercritical fluid and its catalytic performance of CO2 methanation9
Origin of selectivity in surface functionalized vinylpyridine mesoporous silica nanocomposites (VP/SBA) for Henry reaction9
Tunneling Electron Transport in ZnO Nanograins Prepared by Electrospinning Method: An Ethyl Acetate Vapour Sensor by Chemiresistive Method9
Effect of nickel promoter in Au/TS-1 catalysts for gas-phase propylene epoxidation9
Fabrication of porous aluminum composites containing hollow ceramics9
Fabrication of porous nano silica materials by template-assisted strategy for controlled drug delivery studies9
Dynamic emissivity control in MXene-based materials for next-generation thermal camouflage9
Efficient adsorption of methyl orange and methylene blue dyes by a novel carbazole-based hyper-crosslinked porous polymer9
Ruthenium-containing MCM-22 and ITQ-2 as potential redox catalysts for benzhydrol oxidation9
Improved aromatic yield and toluene selectivity in propane aromatization over Zn–Co/ZSM-5: effect of metal composition and process conditions8
Application of solid acid catalysts in naphthalene alkylation reaction8
Growth of carbon nanotubes and carbon spheres on diatoms8
Physicochemical and microstructural properties of porous Zn-doped hydroxyapatite ceramics: cell behavior on their surfaces8
Adsorption of ciprofloxacin and tetracycline from wastewater by layered double hydroxides modified vermiculite8
Synthesis of CuI-modified thiol-functionalized MCM-41 silica-based materials and their catalytic tetralin performance8
A promising approach to 3D printing of metal foam with defined porosity8
TiO2 nanotubes produced by the anodization process under different parameters8
Synthesis, properties, and applications of chitosan hydrogels as anti-inflammatory drug delivery system8
Effect of chemical vapor deposition of toluene on gas separation performance of carbon molecular sieve membranes8
Crystallographic study of direct methanol oxidation to formaldehyde by the fully Mn2+-exchanged zeolite Y (FAU, Si/Al = 1.56)8
Activated carbon as a catalyst to promote the reactivity of hydroquinone in skin whitening cosmetics8
One step hydrothermal synthesis of Fe2O3/KIT-6 nanocomposite as highly responsive humidity sensor8
Synthesis and characterization of polyurethane rigid foam by using feedstocks received from renewable and recyclable resources8
Ethylbenzene formation and its conversion towards coke in the side-chain methylation of toluene on a basic X zeolite8
Stabilization and anchoring of cerium-copper alloy on multi walled carbon nanotube as a superb nanocatalyst: excellent performance in synthetic reactions8
Preparation of pyridine Schiff base functionalized mesoporous channels and its exploration as fluorescent detection of silver ions in aqueous medium8
Improving mechanical stability of SBA-15 monoliths prepared from polymeric scaffolds replication using bentonite clay8
Synthesis, characterization, and gas (SO2, CO2, NO2, CH4, CO, NO, and N2) adsorption properties of the CTF-1 covalent triazine framework-based porous polymer: experimental and DFT studies8
Enhancement of N2 adsorption by Z-scheme porous g-C3N4/ZnFe2O4 composite material for high-efficient photocatalytic nitrogen fixation8
Nickel(II) unsymmetrical Schiff base complex immobilized into three dimensional mesoporous silica KIT-6: a novel and efficient catalyst for selective oxidation of sulfides to sulfoxides8
Collaborative role of seed solution and CTAB in the synthesis of hierarchical ZSM-5 zeolites and their templating mechanism8
Nitrogen-containing nanoporous carbons synthesized from direct carbonization of non-porous coordination polymers for CO2 capture8
A review of graphene-oxide/metal–organic framework composites materials: characteristics, preparation and applications8
Preparation and characterization of novel bio-composites based on functionalized zeolite and nano-hydroxyapatite for a potential application in bone treatment8
SiO2 aerogel multiscale reinforced by glass fibers and SiC nanowhiskers for thermal insulation8
Innovative application of high nitrogen magnetic MOF as a catalyst in the aza-Michael reaction8
Low-temperature graphitization of carbon foam using nickel-based catalysts for enhanced thermal conductivity: application in the pyrolysis of oil-rich coal8
Catalytic Deoxygenation of Oleic Acid over Synthesized Ni@CMK-3 Catalyst using Analytical Py-GC/MS and TG-FTIR8
Controllable synthesis of porous MxS@C composites (M = fe, Cu, Mn) with highly efficient electromagnetic absorption properties8
Heterogeneous photocatalytic degradation of anionic dye on polyaniline/microcrystalline cellulose composite7
Advanced aerogels from waste tires and coal ash for thermal and acoustic insulation applications- insights into the effect of synthesis conditions and precursors contents on aerogel characteristics7
Preparation of peanut shell cellulose nanofibrils and their superhydrophobic aerogels and their application on cotton fabrics7
Aqueous synthesis of mesoporous FeNbO4 for efficient degradation of organic contaminants in sunlight assisted advanced oxidation process at near neutral pH7
Metal salts assisted thermoplastic polymer NIPAM in-situ carbonization on porous silica microspheres surface7
Design of nanoarchitecture for synergistic interactions to realize nanoflower-like Ni3S4 supported on graphene sheets as high-performance supercapacitor electrodes7
Controlled synthesis of high performance SAPO-34 with sheet-like morphology and small particle size using concentrated gel system7
Hollow lanthanum ferrite perovskite for the enhanced adsorption-photo-Fenton catalytic activity of degradation of ibuprofen7
Alkylsilyl protected amino acid based versatile organogelator for potential oil spillage recovery and waste water treatment7
Porous material for CO2 capture: preparation, performance evaluation, and analysis of adsorption isotherms7
Preparation of macroporous alumina ceramics by ice templating without freeze drying using natural rubber latex binder7
Aqueous-based, high-density nanoporous carbon xerogels with high specific surface area for supercapacitors7
Facile fabrication of thermo-mechanically reinforced polystyrene-graphene nanocomposite aerogel for produced water treatment7
Bi-functionalized MCM-41 for heavy metal ions removal: synthesis, enhanced performance and mechanism study7
Preparation of super-hydrophobic cotton fabrics with conductive property based on graphene/Ag composite aerogels7
Acetylated narrow micropores carbon for CO2 and CH4 adsorption7
Synergistic effect of Zn with Ni on ZSM-5 as propane aromatization catalyst: effect of temperature and feed flowrate7
Superhydrophobic porous organic cage decorated melamine sponge for efficient oil-water separation7
Rapid room temperature synthesis of a new 2D AIE-chromophore COFs at room temperature and highly selective naked eye sensing of Fe3+ ions6
Ruthenium loaded moderate acidic SAPO-11 for hydrogenation of aromatic derivatives6
Ordered mesoporous MCM-41 containing cobalt ferrite as high-performance catalyst in the synthesis of 5-substituted 1H-tetrazoles and oxidation of sulfides6
Evaluating the potential of NUIG2 metal–organic framework for adsorption of short linear alkanes at low pressure6
Modification of mesoporous SBA-16 with cobalt doping for outstanding humidity sensor at room temperature6
Graphitization of carbonized wood by transition metal catalysis to enhance hydrovoltaic effect6
Constructing porous ZnO/SnO2 nanocomposites for the detection of methane at low operating temperature6
Near-infrared light-mediated HMTNs@PMO-DOX/ICG@HA drug composite nanoparticles enable a synergistic combination of chemical and photothermal therapy for tumors6
Solar-heated melamine sponge decorated with Fe3O4 for continuous recovery of viscous crude oil6
Preparation and CO2 capture performances of KIT-6@reduced graphene oxide composites6
Alkyl-imidazolium templating synthesis to extra-large-pore aluminogermanosilicate zeolite IRR with enhanced Al substitution and excellent catalytic performance in bulky molecule acetalization6
A novel high-efficiency In-based catalyst for ethylbenzene dehydrogenation with CO26
Investigation of structural and morphological insights of nanostructured layered double hydroxides: catalytic activity in aldol condensation6
Synthesis of light weight recron fiber-reinforced sodium silicate based silica aerogel blankets at an ambient pressure for thermal protection6
Hierarchical self-assembly of Zirconium toughened Alumina based bioinspired microporous material by freeze casting method6
Bifunctional metal-loaded micro-mesoporous zeolites for waste plastics conversion to high quality liquid product6
Degradation of tetracycline by MIL-101(Fe)/CoFe2O4 activated persulfate under visible light6
Ultralight and robustly compressible silica aerogel enhanced by AC/C sponge with high oil/water separation6
Gas-phase O-methylation of catechol with dimethyl carbonate over SBA-15-supported aluminum phosphate catalyst6
Caterpillar-shaped hierarchical ZSM-5 resulted from the self-assembly of regularly primary nano-sized zeolite crystals6
Superhydrophobic silk fibroin-silica melamine sponge for efficient oil–water separation6
Effects of pore microstructures on thermal and mechanical properties of porous TiC fabricated by hot press sintering6
The effect of amorphous silica support on the catalytic activity of liquid-exfoliated monolayered MCM-56 zeolite6
Carbon-incorporated NaTi2(PO4)3 on carbon cloth as a binder-free anode material for high-performance aqueous sodium-ion hybrid capacitors6
Efficient production of hydrogen and carbon nanotubes via the cracking of a waste cooking oil model compound over ordered mesoporous Ni/KIT-6 catalysts6
PVP-assisted Sn-Ti microspheres for the efficient B–V oxidation of cyclohexanone6
Synthesis, characterization, and evaluation of the CO2 adsorption capacities of beta, ZSM-12, ZSM-48, and silicalite-1 zeolites obtained in the presence of tetraethylammonium hydroxide and 1,6-diamino6
Preparation and characterization of magnetic covalent organic framework and its application for efficient adsorption of Benzo[a]pyrene6
Designing and fabricating high-performance supercapacitor based on defective mesoporous carbon as electrode and Disperse Blue 6 as novel redox additive electrolyte6
Recent advances and developments in advanced green porous nanomaterial for sustainable energy storage application6
Regulating the hydrophobicity and pore structure of silica aerogel for thermal insulation under humid and high temperature conditions6
Rational synthesis of pH-responsive mesoporous organosilica nanoparticles functionalized with 2-aminothiophenol for controlled release of curcumin5
Design of nitrobenzene vapor sensor based on PCN-2245
Effect of surfactant on electrochemical performance of Co3O4 electrode and its application in supercapacitor5
Correction: Preparation of graphene aerogels and their photothermal adsorption performance on heavy oil5
Carboxymethyl cellulose modified reduced graphene oxide coated melamine sponge for efficient seawater evaporation5
Synthesis of 3D graphene/MnO2 nanocomposites with hierarchically porous structure for water purification5
Boosting oxidative-adsorptive desulfurization of fuel oil by constructing a mesoporous coupled desulfurizer with bimetal of MoO3 and WO35
Carbon nanofibers derived from carbonization of electrospinning polyacrylonitrile (PAN) as high performance anode material for lithium ion batteries5
Novel Rh catalytic systems based on microporous metal-organic framework MIL-53(Al) for “green” ethylene hydroformylation5
Production and characterization of porous magnetic biochar: before and after phosphate adsorption insights5
Nanostructured g-C3N4 synergistically with hydrogen peroxide as a metal-free photocatalyst for efficient degradation of organic dye pollutants5
Efficient reduction of cr(VI) over nitrogen defected 1D/2D CuO/g-C3N4 heterojunction photocatalysts5
Synthesis and characterization of lightweight geopolymer materials from rich-silica diatomaceous earth curing under hydrothermal conditions5
Sulfated/Zr-containing mesoporous carbons: a promising nanostructured catalytic material5
A sandwich framework effect on the conversion of cylindrical pore into slit pore and its catalytic application5
Improved catalytic performance and stability of defected UiO-66–SO3H in the esterification reaction of cyclohexene with cyclohexanecarboxylic acid5
Publisher Correction: Functionalized diatom biosilica decorated with nanoparticles: synthesis, characterization, catalytic oxidation, and dye scavenging applications5
Surface evaluation of carbonitride coating materials at high temperature: an investigation of oxygen adsorption on crystal surfaces by molecular dynamics simulation5
Synergistic effect between CeO2 and Cu for ethylene carbonate hydrogenation5
The dramatic influence of gelation solvent choice on the structure and mechanical properties of resorcinol-formaldehyde aerogels5
Hollow mesoporous carbon nanospheres from self-generating dual template synergetic assembly for enhanced curcumin release5
In₂O₃/MoS₂ composite prepared by electrostatic self-assembly for NO2 sensing at room-temperature5
In situ synthesis of three-dimensional electrospun polyacrylonitrile nanofiber network reinforced silica aerogel for high-efficiency oil/water separation5
Synthesis and characterization of a new biomaterial-based scaffold based on chitosan and cashew gum: an inquiry into structural and physical properties5
Eco-friendly and benign synthesis of 5-(aryl)alkyl substituted NH-tetrazoles via protonated MCM-41@Silyl-nPr-DABCO-H nanocatalyst and DFT study5
Melamine-derived nitrogen-doped carbon foam supported bimetallic NiZn-MOFs as an efficient adsorbent for CH4 storage5
A good method of preparing ternary glutaraldehyde/polyvinyl alcohol/silicate microfiltration membrane applicable to removal of spores5
Lacunary Keggin tungstoborate embedded in mesoporous TiO2 for the styrene oxidation5
Direct synthesis of H type ZSM-5 in shaped form and catalytic properties in methanol-to-hydrocarbon reaction5
MCM-41 supported quaternary ammonium ionic liquids as an effective heterogeneous catalyst for CO2 cycloaddition reaction5
Preparation of hierarchical TS-1 molecular sieve membrane catalyst and its catalytic performance for chloropropylene epoxidation5
Improved electrochemical performance of silicon monoxide anode materials prompted by macroporous carbon5
Correction: One-step synthesis of CuO/MCM-41 nanocomposites and their application in photocatalytic degradation of dyes5
Correction: Surface evaluation of carbonitride coating materials at high temperature: an investigation of oxygen adsorption on crystal surfaces by molecular dynamics simulation5
A multifunctional zeolitic imidazolate framework-8@wood aerogel composite intergrating superior performance of dye adsorption capacity and flame-retardant property5
Redispersion of Pt nanoparticles encapsulated within ZSM-5 in oxygen and catalytic properties in partial oxidation of methane5
Self-sacrificing template synthesis of nitrogen-doped hierarchical porous carbons as an effective adsorbent for CO2 capture5
A green one-pot three-component syntheses of tetrazole under microwave irradiation using Ni Schiff base complex of mixed ligands on MCM-41 as an efficient heterogeneous catalyst5
Amino-functionalized core–shell magnetic nanocomposites: synthesis, characterization, and adsorption mechanism towards bisphenol A in water5
Effect of cerium doping to improve the optical and electrical properties of zinc oxide nano structured thin films prepared by spray pyrolysis for transparent conductive oxides applications5
Facile preparation of lightweight high-elastic celluous/SiO2 composite aerogel with outstanding thermal insulation performance5
Cost-effective synthesis of nitrogen self-doped activated carbon with 3D porous honeycomb structure for enhanced supercapacitor electrode performance5
Retraction Note to: Application of partial sintering of waste glasses for preparation of porous glass bodies5
Nickel–copper catalysts supported by boron and nitrogen co-doped activated carbon for gas phase carbonylation of ethanol5
Preparation of antimicrobial activated carbon fiber for adsorption4
Synthesis of grape-seed derived carbon with high specific surface area for CO2 selective adsorption4
A facile and green preparation of aluminum silicate fiber reinforced silica aerogel composites for thermal insulation4
Porous network of nitrogen self-doped honeycomb like activated carbon derived from Caladium tricolor leaves: a multifunctional platform for energy and environmental applications4
Nanostructures embedded on porous materials for the catalytic reduction of nitrophenols: a concise review4
Preparation and characterization of mussel-inspired dual-crosslinked hydrogels based on hydroxypropyl chitosan4
MWCNTs modified α-Fe2O3 derived from MIL-53(fe) with highly sensitive electrochemical sensor for ferulic acid4
Optimization of pore structure and mechanical properties of ultra-high molecular weight polypropylene porous membranes4
Enhancing silica foam with NaY zeolite and heteropoly acid for efficient esterification and transesterification catalysis4
Silica aerogels; a review of synthesis, applications and fabrication of hybrid composites4
Preparation of porous alginate-based smart dressings used in real-time monitoring of pH in chronic wounds by evaluating two fabrication routes: freeze-drying vs. electrospinning4
A green approach to the development of novel antibacterial cinnamon oil loaded-PVA/egg white foams via Pickering emulsions4
Ordered silica matrices supported ionic liquids as highly efficient catalysts for fine chemical synthesis4
Preparation of lightweight and hydrophobic natural biomass-based carbon aerogels for adsorption oils and organic solvents4
Enhancing the understanding of surfactant influence in LTA crystallization through microwave-assisted methods at different temperatures4
Biomass-based porous composites with heat transfer characteristics: preparation, performance and evaluation - a review4
Facile synthesis of nano-casted mesoporous WO3 derived from KIT-5 for fabrication of highly sensitive NH3 gas and humidity sensor4
0.25169706344604