Reactive & Functional Polymers

Article	Citations
Introductive remark to the Special Issue “Chitosan for the Future” published in Reactive and Functional Polymers	263
Thermally stable and deformation-reversible eugenol-derived bismaleimide resin: Synthesis and structure-property relationships	198
Selective adsorption of silver(I) by dimercaptosuccinic acid (DMSA) functionalized polyhedral oligomeric silsesquioxane (POSS)-based hybrid polymer: Behavior and mechanism	135
Editorial Board	128
Effects of chain extension and clay reinforcement on PLA nanocomposite foams	112
Preparation and characterization of sodium lignosulfonate-chitosan hydrochloride composite materials for dye adsorption	88
Design of thermally triggered triple-shape memory ternary polymer blends for 4D printing applications	86
Simultaneous electropolymerization of pyrrole and anionic or cationic polymerizable monomeric ionic liquids. Linear actuation of the attained materials	84
Editorial Board	75
High degree of polymerization of poly(1-pyrenebutyric acid) enables the ultra-trace detection of Cr2O72− in milk	73
Reduction-sensitive mixed micelles based on mPEG-SS-PzLL /TPGS to enhance anticancer efficiency of doxorubicin	69
Near-infrared electrospun fiber with bimetallic coating for antibacterial and bone regeneration	66
Editorial Board	66
Adsorption of catechol on a weak-base anion exchanger prepared by a novel template-induced method: Batch tests	61
Preparation and properties of tumor-targeting lentinan-oleic acid polymer micelles based on folic acid for adriamycin delivery	60
Editorial Board	59
Fabrication of amphoteric gelatin nanospheres-doped self-healing nanocomposite hydrogels and the application in flexible sensors	55
Fabrication of an injectable hydrogel scaffold embedding kartogenin-encapsulated PLGA microsphere with long-term drug release to promote chondrogenesis	54
Editorial Board	49
Editorial Board	48
Bio-based poly(decylene terephthalate-co-decylene furandicarboxylate)s derived from 2,5-furandicarboxylic acid (FDCA): Synthesis and properties	45
Optimization of silane modification and moisture curing for EPDM toward improved physicomechanical properties	44
Editorial Board	43
Base-functionalized polymeric chemisorbents for succinic acid recovery from aqueous solution	41
Editorial Board	41

Transformation of CuO and Cu2O particles into CuxS within the polymeric matrix of anion exchangers, and its structural and morphological implications	41
Ultra-high Tg and ultra-low CTE polyimide films based on tunable interchain crosslinking	40
Development of leaf-adhesive polyurethane microcapsules loaded with prochloraz for enhanced fungicide efficiency	40
A magnetic molecularly imprinted nanoparticle assay (MINA) for detection of pepsin	39
Trace detection of La (III), Ce (III), Ce (IV), Nd (III), and Gd (III) using 2, 8, 14, 20-tetramethyl-5, 7-dinitro calix [4] resorcinarene polyhydroxamic acid by solid-phase extraction and separation	38
Esterification modified corn starch composite with chitosan and PVP for enhanced mechanical properties and antimicrobial freshness preservation of starch-based films	38
Eco-friendly poly(vinyl alcohol)/partially hydrolyzed polyacrylamide/graphene oxide semi-IPN nanocomposite hydrogel as a reusable and efficient adsorbent of cationic dye methylene blue from water	37
Anti-counterfeiting ink based on polymer nanoparticles containing spiropyran and Aza-BODIPY for artificial industries	37
Grafting of phosphonylated polymers onto 3D printed polycaprolactone scaffolds improves osteoblasts proliferation and calcium mineralization in-vitro	36
Production of reusable and colorimetric cyanide sensor hydrogels for rapid detection of cyanide ions in various aqueous media	35
Superhydrophilic polyvinyl alcohol-formaldehyde composite sponges with hierachical pore structure for oil/water emulsion separation	34
Clusterization-triggered emission of poly(vinyl amine)-based ampholytic block and random copolymers	33
Preparation and performance evaluation of bio-based wood-plastic composites from ricinoleic acid ring-openning epoxidized soybean oil	33
Self-healing anti-corrosive coating using graphene/organic cross-linked shell isophorone diisocyanate microcapsules	32
Creating of highly hydrophobic sorbent with fluoroalkyl silane cross-linker for efficient oil-water separation	32
Organosoluble polyimides with low dielectric constant prepared from an asymmetric diamine containing bulky m-trifluoromethyl phenyl group	31
Synthesis and properties of fully bio-based bifunctional polybenzoxazine derived from difuran diamine	31
Bi-continuous conductive network induced by in-situ phase separation in epoxy composites with enhanced electromagnetic interference shielding performance	31
Evaluation of O-vanillin derived schiff-base intumescent flame retardants in epoxy resin applications: Flame retardancy, smoke emission, and mechanical property	31
Nanocomposites based on polylactide and silver nanoparticles and their antimicrobial and antiviral applications	31
A molecular imprinting polymer based on computer-aided design: Selective enrichment and purification of synephrine from the extract waste liquid of Citrus aurantium L	30
Development of adsorbent materials based on functionalized copolymers with future applications as antibacterial agent in life quality and environmental field	30
Surface modification of hydroxyapatite with polyhedral oligomeric silsesquioxane	30
Malic acid cross-linked chitosan based hydrogel for highly effective removal of chromium (VI) ions from aqueous environment	30
Editorial Board	29
Cu(0)-RDRP of 2-hydroxyethyl methacrylate in a non-polar solvent enables rapid synthesis of high-molecular weight homopolymers and direct access to amphiphilic copolymers	29
Antimicrobial modification of polypropylene films by photograft and layered double hydroxides assembly	28
The effect of substituent group in allyl benzoxazine on the thermal, mechanical and dielectric properties of modified bismaleimide	28
Shape memory engineered scaffold (SMES) for potential repair of neural tube defects	28
Molecularly imprinted thin film surfaces in sensing: Chances and challenges	27
A fluorescent functionalized PET fabric with dual-response to aqueous copper and pH	27
Electrospun cellulose acetate /polyacrylonitrile /thymol /Mg-metal organic framework nanofibers as efficient sorbent for pipette-tip micro-solid phase extraction of anti-cancer drugs	27
Green surface modification of polyvinyl alcohol fibers and its application for dye removal using Doehlert experimental design	27
Flexible and water-soluble polythiophene carboxylate for selective appraisal of acebutolol in aqueous samples	27
Mechanically robust epoxy with electrical breakdown healing capability for power equipment insulation via dynamic networks	26
Homo- and co-cyclopolymers containing symmetrical motifs of (diallylammonio)diacetate	26
Redox-responsive properties of core-cross-linked micelles of poly(ethylene oxide)-b-poly(furfuryl methacrylate) for anticancer drug delivery application	26
Negatively charged poly(N-isopropyl acrylamide-co-methacrylic acid)/polyacrylamide semi-IPN hydrogels: Correlation between swelling and compressive elasticity	26
Degradation and drug release profile of degradable core-corona type particles under acidic condition for cancer treatment	26
Preparation and modification of monodisperse large particle size crosslinked polystyrene microspheres and their application in high performance liquid chromatography	26
Biological properties of direct grafting by ultraviolet irradiation of vinyl benzyl phosphonic acid onto titanium surfaces	26
Amphiphilic block copolymer with diazonium salt pendant groups: Synthesis, self-assembly and post-modification	26
pH-sensitive particles of polymer-surfactant complexes based on a copolymer of N,N′-diallyl-N,N′-dimethylammonium chloride with maleic acid and sodium dodecyl sulfate	25
Polymer ligands of taurine – New class of high selective sorbents for exctraction of silver from multicomponent solutions	25
The copolymerization of flexible poly(ethylene terephthalate)-poly(ethylene oxide terephthalate) poly(ether ester)s and brittle polylactic acid: Balanced mechanical properties and potential biodegrada	24
Functionalization of gum arabic derivatives for catalytic neutralization of organophosphates	24
Flame retardancy and toughness of epoxy resin induced by a star-shaped flame retardant containing P/Si/B	24
Degradation and mineralization of electroactive poly(3-hydroxybutyrate-co-3-hydroxyvalerate) electrospun fibers for bone tissue engineering	24
Tetraethylenepentamine-enriched magnetic graphene oxide as a novel Cr(VI) removal adsorbent	24
Synthesis of ester-free poly(trimethylene carbonate) bearing cinnamyl moiety for antibacterial biomaterials applications	24

Improvement the performance of TFC membranes by deposition a cationic/anionic polyelectrolyte onto their partially hypochlorite-degraded surfaces	24
Iron oxide nanoparticles embedded in porous films for tannic acid detection	24
Photoinduced phase transition of N-benzylideneaniline liquid crystalline polymer and applications of photodismantlable adhesives	24
Pluronic-F127 and Click chemistry-based injectable biodegradable hydrogels with controlled mechanical properties for cell encapsulation	24
Argon nonthermal plasma etching of poly(L-lactic acid) films: Tunning the local surface degradation and hydrolytic degradation rate	23
A multi-functional polyurethane elastomer with high damping, water resistance and flame retardancy	23
Harnessing disulfide and transesterification bond exchange reactions for recyclable and reprocessable 3D-printed vitrimers	23
Preparation and mechanism of toughening and flame retardance of epoxy resin using novel silsesquioxane molecules	23
Synthesis and characterization of poly(Maltodextrin) microgel from maltodextrin as drug delivery system	23
Singlet oxygen generation under optical excitation of polytetrafluoroethylene	22
Preparation and properties of eugenol based flame-retarding epoxy resin	22
In silico and experimental study of functionalized monomer for molecularly imprinted-enoxaparin polymer: A novel green approach	22
Phenoxy resin-based vinylogous urethane covalent adaptable networks	22
Emulsion template – based porous silicones with piezocapacitive response	22
Effect of citric acid on porcine plasma protein bioplastics processed through injection moulding	22
Preparation and performance study of the self-brittle composite detergent with controllable morphology for radioactive decontamination of surface layer of various materials by RAFT one-pot synthesis	22
Investigation of electrochemical, optical, and thermal properties via oligomerization of aminophenol monomer containing halogen and nitro groups using two distinct oxidants	21
Ionic covalent organic framework as photo-activated nitric oxide generator for cascaded gaseous, photothermal, photodynamic and cationic bactericidal synergistic therapy	21
One-pot synthesis of triple responsive composite hydrogel based on hyaluronic acid and its targeted controlled drug release	20
Synthesis of the polyethylene polyamine-based flexible covalent organic frameworks and their application for capturing and fluorescence sensing iodine	20
Functionalized carbon nanotube-quantum dot thin film nanocomposite membrane for separation of β-substituted-α-amino acid enantiomers	20
Cyanate ester and polyethylene glycol based high temperature resistant shape memory polymer development for space applications	20
Kinetic analysis of the enzymatic degradation behavior of polyhydroxyalkanoate (PHA) based on its solid-state structure	20
Synthesis of shape memory bio-based crosslinked polymer: Poly(arbutin)-co-poly(tosyl arbutin)-co-poly(ethylene glycol)	20
Insight of the viscometric behavior of pullulan and curdlan derivative solutions: Effect of the nature and salt concentration	20
Novel high temperature proton exchange membranes based on functionalized poly(arylene dimethylamino benzene) polymers	20
Block copolymer brushes modified cotton fabric for antifouling oil-water separation materials with thermal responsiveness	20
A novel cycloaliphatic epoxy monomer with inherent imide and phosphate groups enabled highly flame-retardant epoxy resin	19
Dual-responsive, highly bacteriostatic and swellable chitosan-based hydrogels loaded with 5-fluorouracil for sustainable release	19
Shape memory, reprocessable and photothermal networks of polyurethane with silyl ether bonds and croconaine segments	19
Novel polyethylene glycol methyl ether substituted polysiloxane membrane materials with high CO2 permeability and selectivity	19
OG-POSS synergistically enhances the corrosion resistance and adhesion property of primer for silicone resin thermal protective coating	19
Energy and combustion performance of Al/PVDF composite films: Vapor-grown carbon fiber as a new additive	19
Facile synthesis of polyester-polyether block copolyols for the sustainable high-performance polyurethane reactive hot melt adhesives	18
Contributions to the quaternization description and kinetics illustrated on poly(dimethylaminoethyl methacrylate)	18
Cross-linked polymer networks based on polysiloxane and nickel β-diketonate precursors	18
Fabrication of flexible electrodes using peelable pressure-sensitive adhesives containing methacrylic-modified cyclic siloxanes	18
Tailoring dielectric performance of P(VDF-CTFE) via incorporating thiophenol as a side chain	18
Biocompatible oligo-oxazoline crosslinkers: Towards advanced chitosans for controlled dug release	18
A simple approach for fabrication of a promising hyperbranched polyurethane-urea - sulfur (HBPU-Urea-Sulfur) hybrid coating material through the utilization of elemental sulfur	18
High generation dendrimer decorated poly-Ɛ-caprolactone/polyacrylic acid electrospun nanofibers for the design of a bioelectrochemical sensing surface	18
Measuring self-healing in epoxy matrices: The need for standard conditions	18
Synthesis of ferrocene/chitosan-AgNPs films and application in plasmonic color-switching and antimicrobial materials	18
Double functionalization of chitosan based nanofibers towards biomaterials for wound healing	18
Antioxidant and antithrombotic study of novel chitosan-diallyl disulfide inclusion complexes nanoparticles for hemodialysis applications	18
Effect of structure matching in the adsorption process: The preparation of alkylbenzene-functionalized polypropylene nonwoven using surface modification for adsorbing nonylphenol	18
Antioxidant and UV-blocking glucose-crosslinked sericin films with enhanced structural integrity	18
Synthesis of poly(2,4,6-trinitrophenyl acetal acrylate) as a new energetic binder and calculation of its heat of formation: A theoretical and experimental study	18
Encapsulation of heteropolyacids within hollow microporous polymer nanospheres for sustainable esterification reaction	18
Molecular imprinting of doxorubicin by refolding thermally denatured bovine serum albumin and cross-linking with hydrogel network	17
Effect of the macromolecular architecture on the thermoresponsive behavior of poly(N-isopropylacrylamide) in copolymers with poly(N,N-dimethylacrylamide) in aqueous solutions: Block vs random copolyme	17
Biobased unsaturated polyesters containing trans-2-butene-1,4 -diol and various dicarboxylic acids: Synthesis, characterization, and thermo-mechanical properties	17
Preparation of nonmigratory flexible poly(vinyl chloride)-b-poly(n-butyl acrylate)-b-poly(vinyl chloride) via aqueous reversible deactivation radical polymerization in a pilot reactor	17
Conjugated microporous polymer bearing 1,3,4-oxadiazole and thienyl moieties for decomposition of organic dyes under visible light	17
Influence of poly(butyl acrylate-co-methacrylic acid) stabilized silver nanoparticles on mechanical and antibacterial properties of peroxide prevulcanized natural rubber	17
Quaternary imidazolium-functionalized reactive silica nanoparticles-containing thiol-ene photocured antibacterial hybrid coatings	17
Synthesis and evaluation of functional carboxylic acid based poly(εCL-st-αCOOHεCL)-b-PEG-b-poly(εCL-st-αCOOHεCL) copolymers for neodymium and cerium complexation	17
Degradable pH-responsive polymer prodrug micelles with aggregation-induced emission for cellular imaging and cancer therapy	17
Editorial Board	17
Based on functional materials and PLGA for the florfenicol controlled release system and its antibacterial properties	16
Corrigendum to “Sulfurized DOPO synergizes with phenoxytriazine to impart epoxy thermoset fire safety, thermal stability and mechanical toughness” [React. Funct. Polym. 200 (2024)105927]	16
Injectable multi-responsive hydrogels cross-linked by responsive macromolecular micelles	16
Amino-silane co-functionalized h-BN nanofibers with anti-corrosive function for epoxy coating	16
Binding selectivity of N-alkylaminated modified chitosan nanoparticles produce a synergistic antibacterial effect against gram-negative strains	16
Molecular imprinted polymer with dorzolamide for contact lens applications assisted by computational and experimental design	16
Preparation and evaluation of magnetic graphene oxide molecularly imprinted polymers (MIPs-GO-Fe3O4@SiO2) for the analysis and separation of tripterine	16
Inhibition of plasticizing effect in nanostructured epoxy thermosets toughened with SEBS-g-PEG copolymers	16
Cleavable epoxy networks using azomethine-bearing amine hardeners	16
Antimicrobial polyurethane catheters synthesized by grafting-radiation method doped with silver nanoparticles	16
Preparation of long-lasting antibacterial wound dressing through diffusion of cationic-liposome-encapsulated polyhexamethylene biguanide	16
Synthesis of phosphate and silane-based conjugated polymers derived from bis-azomethine: Photophysical and thermal characterization	16
Design lignin doped with nitrogen and phosphorus for flame retardant phenolic foam materials	16
Alginate/methacrylic acid/calcium ion-based pH-sensitive drug delivery hydrogel for the treatment of ulcerative colitis	16
A bio-based reprocessable and degradable polybenzoxazine with acetal structures	16
Facile approach to synthesis super-adsorptive hydrogel based on hyperbranched polymer for water remediation from methylene blue	16
MBA-cross-linked poly(N-vinyl-2-pyrrolidone)/ferric chloride macromolecular coordination complex as a novel and recyclable Lewis acid catalyst: Synthesis, characterization, and performance toward for	15
Poly(butylene 2,5-thiophenedicarboxylate-co-glycolate) copolyesters with good degradation and barrier properties	15
Retracted: KCl nanoparticles-loaded octaphenylsilsesquioxane as an efficient flame retardant for polycarbonate	15
Design and synthesis of gradient-refractive index isosorbide-based polycarbonates for optical uses	15
Efficient and selective adsorption of Au(III) and Pd(II) by trimesoyl chloride-crosslinked polyethyleneimine	15

Evaluation of temperature resistance of non chemical crosslinked double-tailed hydrophobically associating polymer fracturing fluid	15
Novel negatively-charged amphiphilic copolymers of PVDF-g-PAMPS and PVDF-g-PAA to improve permeability and fouling resistance of PVDF UF membrane	15
Photo-induced periodical swing deformation of multiple hydrogen bonds crosslinked liquid crystal elastomer	15
Superhydrophobic polyaniline/TiO2 composite coating with enhanced anticorrosion function	15
Preparation and performance study of thermo-responsive P(NIPAM-AM-ABP)/keratin composite nanofiber membrane for bio-application	15
An antibacterial, highly stretched and self-healing polyurethane elastomer for flexible electronic devices	15
Semi-conducting cyclic copolymers of acetylene and propyne	15
Study on the properties of urea-formaldehyde resin in repairing microcracks of cement stone in oil well under CO2 acid environment	15
Rubber-assisted and modulated epoxy topological network for developing fatigue-resistant, high-strain-cycle high performance shape memory polymer composites	15
Study on preparation and in vitro anti-tumor activity of chitosan-modified mesoporous silica hybrids by GPTMS cross-linking agent	15
Novel polyesters based on indazole moiety: Synthesis, characterization and applicability as efficient inhibitors for acidic X-65-steel corrosion	15
Biomimetic design of elastomers with improved mechanical properties by integrating hydrogen bonds with covalent crosslinking bonds	15
Retraction notice to “KCl nanoparticles-loaded octaphenylsilsesquioxane as an efficient flame retardant for polycarbonate” [Reactive and Functional Polymers 177 (2022) 105284]	15
Effect of polycarbodiimide, epoxy chain extenders and tannic acid on the hydrolysis and UV resistance of polylactic acid	15
Highly selective polyphenylene sulfide nanocomposite membranes based on two-dimensional metal–organic frameworks for molecular separation	15
Probing the molecular basis for sulfonamides recognition in surface molecularly imprinted polymers using computational and experimental approaches	15
Preparation and characterization of cationic pullulan-based polymers with hydrophilic or amphiphilic characteristics for drug delivery	15
Investigation on ionical cross-linking of alginate by monovalent cations to fabrication alginate gel for biomedical application	15
Molecularly imprinted electrochemical sensing platform for 2-Aminoadipic acid, a diabetes biomarker	15
A catechol-containing dialdehyde cellulose adhesive with strong adhesion and biocompatibility	14
Dual functional porous organic polymer: Reversible iodine capture and selective sensing of picric acid	14
Review of advances in polymeric wound dressing films	14
Designing and evaluation of thiosemicarbazide-functionalized/ion-imprinted cellulose for selective removal of mercury (II) ion	14
Preparation of a MOF flame retardant containing phosphazene ring and its effect on the flame retardant of epoxy resin	14
Development of multifunctional hydrogel composite based on poly(vinyl alcohol-g-acrylamide) for removal and photocatalytic degradation of organic dyes	14
Bioactive functional scaffolds for stem cells delivery in wound healing and skin regeneration	14
Effect of the different layered structural modification on the performances of the thin-film composite forward osmosis flat sheet membranes – A review	14
Features that make macromolecules 2D polymers	14
Highly transparent PVA/nanolignin composite films with excellent UV shielding, antibacterial and antioxidant performance	14
Preparation and application of cross-linked PVA microspheres with narrow particle size distribution by suspension polymerization using uniform porous tube	14
The constructions of the fully flexible s-triazine-based covalent organic frameworks for adsorping iodine and fluorescence sensing p-nitrophenol and iodine	14
Evaluation of magnetic material IIP@GO-Fe3O4 based on Kesambi wood (Schleichera oleosa) as a potential adsorbent for the removal of Cr(VI) from aqueous solutions	14
Improving the hydrophilicity and antifouling performance of PVDF membranes via PEI amination and further poly (methyl vinyl ether-alt-maleic anhydride) modification	14
Synthesis, characterization, and acute toxicity of pH-responsive Salvia spinosa mucilage-co-acrylic acid hydrogel: A smart excipient for drug release applications	14
Synthesis of silicone hydrogel for soft contact lens (SCLs) and sustainable release of dexamethasone	14
Editorial Board	13
Sequestration of oils from water using superhydrophobic silanized montmorillonite-KSF nanoclay coated polyurethane foam	13
Editorial Board	13
Editorial Board	13
Quaternary ammonium salt-based cross-linked micelle with copper nanoparticles for treatment of sulfate reducing bacteria biofilm	13
HASc-responsive dual-drug nano-particles for co-delivery of Pt(II) and BAI for combination therapy of tumors	13
Preparation and UV curing properties of oxazolidinone-based acrylate derivatives	13
Application potential of modified waste-lignin as microbial immobilization carriers for improve soil fertility	13
Obtention of biocompatible hydrogels containing PEGs/silicon fatty blocks with potential use as A controlled release system	13
High free volume polymers of intrinsic microporosity for efficient solar thermal fuels with enhanced energy storage capacity	13
Corrigendum to “Redox-responsive hydrogels of thiolated pectin as vehicles for the smart release of acetaminophen” [Reactive and Functional Polymers, 181 (2022) 105448]	13
Pure aliphatic polycarbonate networks via photoinduced anionic ring-opening polymerization at elevated temperature	13
Reactive norbornene- and phenyl carbonate-modified dextran derivatives: A new approach to selective functionalization	13
High performance crosslinked polyvinylidene fluoride (PVDF) membranes for solvent permeation	13
Editorial Board	13
Editorial Board	13
Acrylamidevinyl acetate copolymer as a new UCST copolymer: Phase transition and aggregation behavior; an experimental and theoretical study	13
Editorial Board	13
Editorial Board	13
Insight into the synthesis of biocompatible polymer for collagen stabilization and leather process	13
Wood and olive kernel flour as reinforcement for itaconic acid-based UV-curing additive manufacturing material	13
Preparation of biomolecules-mimic poly (ether sulfone)-based hydrogels and their anti-thrombotic, endothelialization and anti-microbial properties	13
Editorial Board	13
3D printing wide detection range and high sensitivity flexible pressure sensor and its applications	12
Polyvinyl alcohol/polyacrylamide hydrogel-based sensor for lead (II) ion sensing by resonance Rayleigh scattering	12
Preparation of flexible biobased non-isocyanate polyurethane (NIPU) foams using the transurethanization approach	12
Novel core-shell double microcapsules synthesize via inverse Pickering emulsion polymerization for self-healing of epoxy resin compounds	12
Influence of microstructure at 2-position of chitosan derivatives on enantioseparation	12
RAFT polymerization assisted P(NIPAm-co-AAc)-AEMR integrated PVA hydrogels: Dual responsive features, texture analysis, and cytotoxicity studies	12
Evaluation of healable epoxy matrices as covalent adaptive networks in uniaxial compression	12
Preparation and characterization of dialdehyde starch-soybean protein isolate stabilized carvacrol emulsion composite films	12
Synthesis and solution properties of poly(p,α dimethylstyrene-co-maleic anhydride): The use of a monomer potentially obtained from renewable sources as a substitute of styrene in amphiphilic copolymer	12
A highly stretchable and self-healable hyperbranched polyurethane elastomer with excellent adhesion	12
High-performance functionalized graphene oxide reinforced hyperbranched polymer nanocomposites for catalytic hydrolysis of a chiral ester in water	12
Sydnone-maleimide based cascading double 1,3-dipolar cycloaddition for synthesis of “A(A′) + B3” type hyperbranched polyimide	12
Synthesis of gelatin and green tea based stretchable self-healing material of biomedical importance	12
Biodegradable active composite film based on pea protein isolate, sage seed gum, and cumin essential oil: Fabrication and characterization	12
Molecular imprinting-based extraction of rosmarinic acid from Salvia hypoleuca extract	12
Highly salt-resistant 3D melamine sponge-polypyrrole composites for efficient solar interfacial evaporation	12
Novel poly(vinyl alcohol) copolymers containing strong sulfonic acid groups: Synthesis and properties	12
Bio-based poly(vinyl benzoxazine) derived from 3-hydroxycinnamic acid— An intrinsically green flame-retardant polymer free of both halogen and phosphorus	12
Rapid ultraviolet curing of epoxy acrylate films with low refractive index and strong interfacial adhesion	12
Use of pyridine derivatives as inhibitor/retarding agent for photoinduced cationic polymerization of epoxides	12
Reaction mechanism investigation of low Df epoxy-active ester film composites for 10 GHz high-frequency communications	11
Electrochemical behavior of polydiphenylamine-2-carboxylic acid and its hybrid nanocomposites with single-walled carbon nanotubes on anodized graphite foil in lithium aprotic electrolyte	11
Nanostructure transformation in epoxy/block copolymer composites with good mechanical properties	11
Synthesis of eugenol-based phosphorus-containing epoxy for enhancing the flame-retardancy and mechanical performance of DGEBA epoxy resin	11
Amino-functionalized silicones processed as porous dual covalent/supramolecular networks for pressure sensing	11
Permeability improvement of reverse osmosis membranes by addition of dimethyl sulfoxide in the interfacial polymerization media	11
Cellulose acetate mixed-matrix membranes doped with high CO2 affinity zeolitic tetrazolate-imidazolate framework additives	11
A new pH/redox/light stimuli-responsive magnetic molecularly imprinted polymer based on β-cyclodextrin for recognition and controlled release of andrographolide	11
Development of a new route for cation exchange membrane fabrication by using GO reinforced styrenated oil	11
Dual-purpose corrosion and kinetic hydrate inhibitors based on 3-acrylamidopropyl trimethyl ammonium copolymers	11
Synthesis of thermosetting poly(amide-ether) block copolymers and their shape memory properties	11
New cryogels based on poly (vinyl alcohol) and a copolymacrolactone system. II. Antibacterial properties of the network embedded with thymol bioactive agent	11
Piezoelectric MoS2 Nanoflowers (NF's) for Targeted Cancer Therapy by Gelatin-based Shear Thinning Hydrogels. In vitro and In vivo trials	11
Dual pH- and electro-responsive antibiotic-loaded polymeric platforms for effective bacterial detection and elimination	11
CO2 adsorption capacities of amine-functionalized microporous silica nanoparticles	10
Designing double comb copolymer as highly lithium ionic conductive solid-state electrolyte membranes	10
Facile fabrication of single-component flame-retardant epoxy resin with rapid curing capacity and satisfied thermal resistance	10