Electrochemistry Communications

Article	Citations
Electrochemical co-reduction of praseodymium and bismuth from 1-butyl-1-methylpyrrolidinium bis(fluorosulfonyl)imide ionic liquid	266
Pulsed power capacitor design based on 3D inkjet printing	161
Application of finite Gaussian process distribution of relaxation times on SOFC electrodes	152
Solvothermal synthesis-driven quaternary Ni-rich cathode for stability-improved Li-ion batteries	96
A zwitterionic salt with one sulfonate and two ether functional groups as an additive for lithium-ion battery electrolyte	70
Chemical Pressure-Induced enhancement of electrochemical performance in Ni1-X CuxTe2 (X = 0 and 0.10) layered compounds	65
An alkaline ferrocyanide non-enzymatic electrochemical sensor for creatinine detection	63
Paired electrochemical synthesis of formate via oxidation of glycerol and reduction of CO2 in a flow cell reactor	61
Boosting the cycling performance of spinel LiMn2O4 by in situ MnBO3 coating	60
A facile and almost HF-free synthesis of Ti3C2@CuCl composite for supercapacitors	58
Nanoscale engineering to control mass transfer on carbon-based electrodes	56
Nickel sulfides supported by carbon spheres as efficient catalysts for hydrogen evolution reaction	53
Simple air blow to charge Li-air, rechargeable, solid-state batteries using nano-engineered aerogel structures	51
A new polishing method for complex structural parts: Moist particle electrolyte electrochemical mechanical polishing (MPE-ECMP)	51
Editorial Board	51
Understanding the behaviour of a niobium oxide cathode in a molten chloride bath using different DC voltammetric techniques	48
Editorial Board	45
Editorial Board	45
Investigation of the effect of surface modification with organosilane on the multi-redox electrochemical behavior of Co3[Co(CN)6]2 nanocubes	40
Evaluating the antioxidant activity of different species using a novel reagentless chronopotentiometric method	38
The growth rate of nanotubes and the quantity of charge during anodization	37
Two-level porosity electrodes from metal-polymer dispersions	37
Capacitor properties of 3D hierarchical structured electrodes prepared by one-step electrodeposition of cobalt nanowires on stainless steel fiber sheets	37
Effects of electrolyte composition on the growth and properties of titanium oxide nanotubes	36
Editorial Board	35

Editorial Board	34
Novel electrophoresis device with a molecularly imprinted polymer sensor for high-performance detection	34
Editorial	33
Solvent-free synthesis of ZrO2 nanoparticles/nitrogen-rich two-dimensional carbon nanosheet composites as efficient catalysts for ORR	32
Lithium phosphate incorporated carbon nanotube interlayer as an efficient polysulfide immobilizer for high performance lithium sulfur batteries	32
Editorial Board	31
Editorial Board	31
Ni(OH)2-free NiCu as a hydrogen evolution and oxidation electrocatalyst	31
Editorial Board	31
Electrochemical properties of the Si thin-film anode deposited on Ti-Nb-Zr shape memory alloy in Li-ion batteries	30
On the role of inductive loops at low frequencies in PEM electrolysis	28
Electrochemical micromachining on nickel and nickel-based superalloys with two-tone sinusoidal signal	28
On the dynamic passivity and corrosion resistance of a low cost and low density multi-principal-element alloy produced via commodity metals	27
Single-step electrochemical synthesis of nano-crystalline CoCrFeNi high-entropy alloy powder	27
Conversion of nitrogen to ammonia using a Cu/C electrocatalyst in a polymeric electrolyte reactor	27
MOFs-derived TiO2 on N-doped carbon materials with high concentration of oxygen vacancies as Pt supports and co-catalysts for methanol electrooxidation	26
The effects of local graphitization on the charging mechanisms of microporous carbon supercapacitor electrodes	26
Non-flammable free-standing TiO2 nanotubular hybrid membrane prepared by a two-step anodization	26
Visualization of dynamic behavior of liquid water in the microporous layer of polymer electrolyte fuel cell during water injection by time-resolved X-ray computed tomography	25
Electro-isolation of galvanic current	24
Electrochemical O-trifluoromethylation of electron-deficient phenols	24
Synergistic effects of co-doping WO3 with Al and Pt on photoelectrochromic performance	23
Tuning initial pH to decrease salt ion transport in saltwater electrolysis	23
Silicon carbide-derived carbon electrocatalysts dual doped with nitrogen and phosphorus for the oxygen reduction reaction in an alkaline medium	22
An approach through steam to form sulfur nanoparticles for lithium sulfur batteries	22
Polymer pencil leads as a porous nanocomposite graphite material for electrochemical applications: The impact of chemical and thermal treatments	22
Dynamic study on the anodic dissolution of 304 stainless steel with elastic stress in sodium chloride solution	22
Electrodeposition of Pd–Se thin films	21
Specific adsorption and highly sensitive detection of methyl red in wastewater using an iron paste electrode modified with a molecularly imprinted polymer	21
Novel sinuous band microelectrode array for electrochemical amperometric sensing	21
An appropriate reference and counter electrode in an all-solid-state battery using NASICON-structured solid electrolyte	21
Growth of porous anodic TiO2 in silver nitrate solution without fluoride: Evidence against the field-assisted dissolution reactions of fluoride ions	21
Finite element modeling simulation of oxygen evolution during charging in lithium-oxygen batteries	20
Electrochemical redox behavior of 2,2-diphenyl-1-picrylhydrazyl radical solubilized by β-cyclodextrin in water	20
In-situ evolution of anodic TiO2 nanotubes to ammonium oxofluorotitanate mesocrystals and their conversion to mesocrystalline TiO2	20
Zwitterionic form of Ugi amine H-phosphinic acid: Structure and electrochemical properties	20
Fenton and Fenton-like catalysts for electrochemical immunoassay: A mini review	20
Influence of experimental conditions on the electrochemical window. Case study on bis(trifluoromethylsulfonyl)imide-based ionic liquids	20
Fabrication of high specific surface area TiO2 nanopowders by anodization of porous titanium	20
Electrochemical reduction of carbon dioxide in an aqueous solution using phosphorus-doped polycrystalline diamond electrodes	20
An in situ spectroelectrochemical study of the dimeric phthalocyanines [(SiPc)2O][OSiHx3]2, [(SiPc)2O][OSiHx3]2+, and [(SiPc)2O][OSiHx3]22+	20
Non-precious electrocatalysts for oxygen evolution reaction in anion exchange membrane water electrolysis: A mini review	20
Structural effects of the oxygen reduction reaction on the high index planes of Pt3Fe	19
Characterization of electrochemical kinetics of SiOx using single-particle electrode technique: An impedance study	19
Impact of speciation on the tellurium electrochemistry in choline chloride-based deep eutectic solvents	19
Microstructure evolution of lithium-ion battery electrodes at different states of charge: Deep learning-based segmentation	19
Carboxymethylated tamarind polysaccharide gum as a green binder for silicon-based lithium-ion battery anodes	19
The potential application of exfoliated MoS2 to aqueous lithium-ion batteries	19
Electrodeposition of a CoNiCu medium-entropy alloy in a water-in-oil emulsion	19
K2.13V1.52Ti0.48(PO4)3 as an anode material with a long cycle life for potassium-ion batteries	19

Interface pH regulation to improve ORR performance of FePc catalyst in acid electrolyte	19
A polarizable reference electrode	18
Redox potential regulated by electrolyte concentration: A case study of electrochemical oxidation of 2,2,6,6-tetramethyl piperidine-1-oxyl	18
Electrically conductive metal oxide-Assisted multifunctional separator for highly stable Lithium-Metal batteries	18
Two-step bipolar anodization: Design of titanium with two different faces	18
Impact electrochemical analysis of soft bio-particles: A mini review	18
Enhanced and evenly-distributed Li+ transport in well-aligned nanochannels enables stable lithium metal anode	17
Insights into the effects of pulsed parameters on H2O2 synthesis by two-electron oxygen reduction under pulsed electrocatalysis	17
Enhanced electrochemical performance of sodium cathode materials with partial substitution of Zr	17
A multiphase model for exploring electrochemical Marangoni flow	16
Insights into the reaction pathways of platinum dissolution and oxidation during electrochemical processes	16
Probing the (de)activation of Raney nickel–iron anodes during alkaline water electrolysis by accelerated deactivation testing	16
Silicic acid electrolyte additive reduces charge transfer impedance at sub-ambient temperature for lithium-ion rechargeable batteries	16
Gas concentration-driven LiOH chemistry in Li-CO2 batteries	16
Microelectrode voltammetric analysis of samarium ions in LiCl–KCl eutectic molten salt	16
The electrochemical effects of pitch stabilization for supercapacitor-grade activated carbon precursors	16
Formation of an organic film on an electrode via a suspension of redox-active droplets in acidic aqueous solution	16
The effect of Al on the corrosion resistance of binary Mg-Al solid solutions: Combining in-situ electrochemistry with combinatorial thin films	15
Understanding solid electrolyte interface formation on graphite and silicon anodes in lithium-ion batteries: Exploring the role of fluoroethylene carbonate	15
Additive manufacturing of composite porosity mixer electrodes	15
An autonomous self-healing mechanism to improve the chemical durability vs. moisture of PVDF-based gel electrolytes for lithium-ion batteries	15
In situ amplification based on assembly of aptamer sandwiches on nanochannels for ultrasensitive detection of exosomes	15
Investigation of the modification of gold electrodes by electrochemical molecularly imprinted polymers as a selective layer for the trace level electroanalysis of PAH	15
Equivalent circuit for assessing pore size distribution in porous electrodes by EIS	15
On the impact of electrolyte temperature on contact glow discharge electrolysis	15
Low-power and cost-effective readout circuit design for compact semiconductor gas sensor systems	14
Electrochemical detection of pesticides: A comprehensive review on voltammetric determination of malathion, 2,4-D, carbaryl, and glyphosate	14
A series of alkali metal elements doped La2Ce2O7 electrolytes for solid oxide fuel cells	14
N-doped reduced graphene oxide loading nano lead oxide as negative additive for enhanced properties of lead-carbon batteries	14
Li9.54Si1.74(P1-xSbx)1.44S11.7Cl0.3: A functionally stable sulfide solid electrolyte in air for solid-state batteries	14
Atomic structure and HER performance of doped MoS2: A mini-review	14
Discharge behavior of NiO as thermal battery cathode at ultrahigh temperature	14
Electrode fabrication at liquid interfaces: Towards transparency and flexibility	13
NO2-functionalized metal–organic framework incorporating bimetallic alloy nanoparticles as a sensor for efficient electrochemical detection of dopamine	13
Superior electrochemical performance of CuS/FeSe2 for advanced asymmetric supercapacitor applications	13
Garnet solid electrolyte blended LiNi0.6Mn0.2Co0.2O2 as high-voltage stable cathodes for advanced lithium-ion batteries	13
Recent advances on pre-sodiation in sodium-ion capacitors: A mini review	13
Extracellular electron transfer drives ATP synthesis for nitrogen fixation by Pseudomonas stutzeri	13
Electrocatalytic activity of layered MAX phases for the hydrogen evolution reaction	13
CO2 transformed into highly active catalysts for the oxygen reduction reaction via low-temperature molten salt electrolysis	13
Nickel-organic frameworks as highly efficient catalyst for electrochemical conversion of CH3OH into formic acid	13
Editorial Board	13
Investigation of mass loading of cathode materials for high energy lithium-ion batteries	13
Ti1.1V0.7Cr Nb1.0Ta0.6C3T high-entropy MXene freestanding films for charge storage applications	13
Electrodeposition of neodymium from betaine-ethylene glycol deep eutectic solvent using neodymium oxide as a precursor	13
Wood-derived carbon anode for sodium-ion batteries	13
Emerging, hydrogen-driven electrochemical water purification	13
Development of an H2 fuel cell electrochemical system powered by Escherichia coli cells	13
Self-supported and integrated Co3Al-layered bimetallic hydroxide nanoribbons on nickel foam enable efficient electrocatalytic water decomposition	12
Editorial Board	12
Editorial Board	12
Editorial Board	12
Differences in the electrochemical behavior of Vulcan XC-72 carbon black and glassy carbon after prolonged potential cycling	12
Non-invasive wearable electrochemical sensors for continuous glucose monitoring	12
Editorial Board	12
Conductivity mapping of topographically complex surfaces using contact-mode carbon fibre in potentiometric SECM	12
Ion-exchange enabled new intercalation Li metal fluorides	12
Potential regulation of bipolar redox-active molecules with fused conjugation for high-voltage symmetric organic redox flow batteries	12
Tailored graft polymerization on SiO2 nanoparticle by sulfonate styrene and methyl methacrylate and evaluation of their electrochemical performance in gel polymer electrolyte based on poly (vinylidene	12
The rise of manganese as catalysts for acidic water oxidation: A mini review	12
Editorial Board	12
Editorial Board	12
Editorial Board	12
Wireless accessing of salivary biomarkers based wearable electrochemical sensors: A mini-review	11
Lignin as redox-targeted catalyst for the positive vanadium electrolyte	11
Tannic acid as a binder and electronic conductor precursor in silicon electrodes for Li-ion batteries	11
Aluminum current collector for high voltage Li-ion battery. Part I: A benchmark study with statistical analysis	11
Comparative studies of recent advances in quantum dots nanocomposites for supercapacitor electrodes	11
Nickel oxide electroplating and electrode surface modification for electrochemical detection of glutamate	11
An ordinary differential equation model for simulating secondary battery reactions	11
Effective electroosmotic transport of water in an intrinsically microporous polyamine (PIM-EA-TB)	11
Electrochemical modification and analytical exploration of resazurin as a redox-active probe for electrochemical biosensors	11
A sodium bis(perfluoropinacol) borate-based electrolyte for stable, high-performance room temperature sodium-sulfur batteries based on sulfurized poly(acrylonitrile)	10
High electrochemical stability of hyperthermophilic archaeal multicopper enzyme adsorbed on gold electrodes compared to fungal laccase	10
On the connection between slurry rheology and electrochemical performance of graphite anodes in Lithium-ion batteries	10
Polymer of intrinsic microporosity (PIM-1) enhances hydrogen peroxide production at Gii-Sens graphene foam electrodes	10
Tuning the course of the oxygen reduction reaction at a carbon electrode using alkaline electrolytes based on binary DMSO–water solvent mixtures	10
Disordered GaSiP solid solution anodes with liquid metal phase for high-performance Li-ion batteries	10
Reductive deposition of aluminum at a water-free ionic liquid/oil interface	10
Rapid, one-step fabrication of MoS2 electrocatalysts by hydrothermal electrodeposition	10

In vivo electrochemically-assisted polymerization of conjugated functionalized terthiophenes inside the vascular system of a plant	10
Hydrogen evolution reaction at lead/carbon porous electrodes studied by a novel electrochemical mass spectrometry set-up	10
Porous multi-metallic Pt-based nanostructures as efficient electrocatalysts for ethanol oxidation: A mini-review	10
Chemical conversion of electrodeposited PbO2 to the all-inorganic cesium lead halide perovskites CsPbBr3 and CsPbCl3	10
Highly enhanced photocatalytic activity of nanotubular Fe2O3/Fe2WO6 nanocomposite film formed by anodizing FeW alloy	10
Modification of micro/mesoporous carbon synthesis method from well decomposed peat using ZnCl2 additional activation step	10
A biomass-based cathode for long-life lithium-sulfur batteries	10
Analysis of the behavior of Zn atoms with a Pb additive on the surface during Zn electrodeposition	10
Practical implantation of Si nanoparticles in Carbon-coated α-FeSi2 matrix for Lithium-ion batteries	10
Magnetically aligned NMC811 electrodes for enhancing electrochemical characterization	10
Comprehensive potentiodynamic analysis of electrodes performance in hybrid capacitors	10
Flow electrosynthesis for efficient O-trifluoromethylation of electron-deficient phenols	10
The relationship between the growth rate of anodic TiO2 nanotubes, the fluoride concentration and the electronic current	10