Journal of Solid State Electrochemistry

Article	Citations
Stainless steel supported NiS/CeS nanocomposite for significantly enhanced oxygen evolution reaction in alkaline media	56
Modifications of bismuth molybdates through selective additions of Zn2+: an efficient photocatalyst for solar-driven water splitting applications	51
Temperature effect on electrochemical properties of lithium manganese phosphate with carbon coating and decorating with MWCNT for lithium-ion battery	48
High-precision joint estimation of the state of charge and state of energy for new energy electric vehicle lithium-ion batteries based on improved singular value decomposition-adaptive embedded cubatu	44
Potentiometry, chemical equilibria, and flow injection analysis—three important topics taught with one experimental setup	43
A sandwich structure of cobalt pyrophosphate/nickel phosphite@C: one step synthesis and its good electrocatalytic performance	40
Correction to: Hydrothermally synthesized highly efficient binary silver strontium sulfide (AgSrS) for high-performance supercapattery applications	36
Foreword to the memorial issue for Professor Roberto Marassi	33
Starch-based porous carbon electrode material prepared by secondary-carbonization strategy and its electrochemical performances	31
Electrophoretic deposition of double-layer ZnO porous films for DSSC photoanode	30
Synthesis and microstructure of iridium coatings by electrodeposition on carbon fibers	30
Solvent-controlled synthesis of Ni-PTA MOFs as high performance anode material for Li-ion batteries	29
FeCu alloy dispersed N-doped carbon compound material for electrocatalytic naproxen degradation	29
Insights into electrochemical behavior and kinetics of NiP on PEDOT:PSS/reduced graphene oxide as high-performance electrodes for alkaline urea oxidation	29
A simple and fast epinephrine voltammetry sensor using reduced graphene oxide and iron metal–organic framework	27
Evaluation of the photoelectrochemical properties of mono and dual single-atom catalysts	26
Screen-printed carbon electrode modified with AgNPs obtained via green synthesis for acetaminophen determination	25
First-principles approach to the structural, electronic and intercalation voltage of Prussian blue (KxFe[Fe(CN)6]) (x = 1, 2) as potential cathode material for potassium ion batteries	25
High-temperature mixed conductivity in PrBaFe2O6−δ	25
Promotion of catalytic activity of Pt@Al-Ti doped ZnO nanostructured anodes for direct methanol fuel cells	24
Impedimetric immunosensor based on conductive and adhesive gold/polypyrrole-dopamine nanocomposite for the detection of carcino-embryonic antigen	24
Carbon cloth supported lithiophilic carbon nanotubes@Ag skeleton for lithium anode via ultrafast Joule heating method	23
Recent advancements in layered double hydroxides as an electrode material for high-performance asymmetric supercapacitors	23
Facile preparation of La2(MoO4)3@C nanosheets as superior anodes for lithium-ion batteries	23
MnO2 electrodeposition at the positive electrode of zinc-ion aqueous battery containing Zn2+ and Mn2+ cations	22

Low-temperature transport properties of isovalent-substituted La0.9Sr0.1YbO3–δ ceramic materials	22
Effect of electrode material, electrolyte composition, and surfactant on electrochemical synthesis of copper nanoparticles	22
Electrocatalytic kinetics and mechanistic insights into indole oxidation reaction on highly oriented pyrolytic graphite electrodes	22
Electrochemical behavior of methylene blue at bare and DNA-modified silver solid amalgam electrodes	21
Electrokinetic remediation of real soils polluted with chlorinated hydrocarbons: relevance of dichlorination and volatilization processes	21
How to optimize the analytical performance of differential pulse voltammetry: one variable at time versus Design of Experiments	21
Janis Stradins: An outstanding electrochemist. Part II: meetings, parallels, and intersections	21
Determination of benzoylecgonine in synthetic urine samples via square-wave voltammetry with boron-doped diamond electrode	21
In memoriam of Alexander Milchev	21
Plasma electrolytic synthesis and characterization of pH-sensitive TiO2-ZrO2-ZrTiO4-CeOx films on titanium	20
Electro-assisted self-assembly of mesoporous silica thin films: application to electrochemical sensing of glutathione in the presence of copper	20
Passivation at a spherical cap microelectrode and comparison to a microdisk: Numerical simulation and experiment	20
Correlation of aluminum doping and lithiation temperature with electrochemical performance of LiNi1-xAlxO2 cathode material	19
Electrochemical performance of rGO-Fe2O3-SnO2 composite anode for lithium-ion battery	19
Electrochemical and energy storage properties of layer-by-layer assembled vanadium oxide electrode-based solid-state supercapacitor in n+-SnO2:F/n-V2O5 heterostructure device form using ionic liquid g	19
Distance learning of introductory electrochemistry and corrosion: home experimentation	19
Correction to: Voltammetric determination of hydroxymethylfurfural in honey using screen‑printed carbon electrodes: optimization and in‑house validation tests	19
Nitrogen-sulfur co-doped FeS/C nanofibers for high-performance lithium/potassium storage	18
Peony-shaped micron-sized NiO particles: their excellent electrochemical performances as anode materials of lithium ion batteries (LIBs)	18
Synchronized and symmetry broken cluster patterns of oscillatory electrochemical reactions in complex networks with 3D placement of electrodes	18
Electrochemical additive manufacturing of copper parts: printed material properties vs. traditionally deposited	18
Ultrasensitive electrochemical immunosensor based on Fe3O4@g-C3N4 nanocomposites for detection of TCM root-rot early warning biomarker - zearalenone	18
Hydrothermal synthesis of NiCo2O4 nanowires for high-performance asymmetric supercapacitors	18
Features of fast charging of lithium-ion batteries: electrochemical aspects (mini-review)	18
Multi-kernel support vector regression optimization model and indirect health factor extraction strategy for the accurate lithium-ion battery remaining useful life prediction	17
Electrochemical behavior of perovskite-type Ce1−xCaxVO3 under reducing conditions	17
Modeling and simulation of 3D electrochemical phase formation under mixed kinetic-diffusion growth control	17
Anodic processes in the alkaline Cu | Cu(II), glycine system—construction and analysis of mass transport–corrected Tafel plots	17
Inherent electrochemical activity of TiO2 (anatase, rutile) enhances the charge capacity of cathodes of lithium-sulfur batteries	16
Hydrogels and their composites based on sulfo-containing acrylates: preparation, properties, and proton conductivity	16
Electrodeposited molybdenum-doped Co3O4 nanosheet arrays for high-performance and stable hybrid supercapacitors	16
Synthesis and electrochemical properties of Bi2WO6/C anode for lithium ion battery	16
Preparation and characterization of graphene nanosheets from graphite flakes through assisted intercalation-expansion using a microwave oven	16
Effect of FePO4 coating on structure and electrochemical performance of Li1.2Ni0.13Co0.13Mn0.54O2 as cathode material for Li-ion batteries	15
Modification of solid electrolyte interphase on deposited lithium metal by large separation between the electrodes in ether-based electrolytes	15
Recent advances in surface coating and atomic doping strategies for lithium-ion battery cathodes: implementation approaches and functional mechanisms	15
Characterisation and application of electrodes with hydrogenated titania nanotubes modified with M13 bacteriophages	15
The in situ investigation of the polyaniline-derived N-doped carbon with the interdigitated array electrodes towards the oxygen reduction reaction	15
Polyvinylpyrrolidone and graphene-modified hematite nanoparticles for efficient electrocatalytic oxidation of p-nitrophenol	15
Nano-silicon/graphite composites caged by mesophase pitch-derived carbon as anode materials for stable lithium storage	15
Solid polymer electrolyte based on tragacanth gum-ammonium thiocyanate	15
Scalable single-step synthesis of α-Nb2O5@C@Ti3C2 composite as high power and long life anode material for sodium-ion batteries	14
Oxygen vacancies disordering and oxy-ion diffusion mechanism in doped ceria electrolytes under IT-SOFC operating conditions	14
Electrochemical pre-treatment of graphite electrode as a green modification strategy for sensitive voltammetric determination of pyrazinamide	14
Electrochemical properties of LiNi0.9Co0.1O2 cathode material prepared by co-precipitation using an eco-friendly chelating agent	14
Electrocatalytic oxidation of methanol and ammonia on Nickel Niacin bio-MOF: a mechanistic investigation	14
In situ reduction-sulfurized FeS2 based on iron oxide as electrocatalyst for rechargeable Li-O2 batteries	14
Drop-on-demand 3D-printed silicon-based anodes for lithium-ion batteries	14
Solid–electrolyte interphase formation during Li metal deposition in LiN(SO2F)2-based solvate ionic liquids	14
A strain rate-dependent interfacial contact model by considering the strain rate and temperature of lithium for LLZO-based solid-state lithium batteries	14

Electrochemical and calorimetric data for the fluorite trigadolinium ruthenium heptaoxide Gd3RuO7(s)	14
Correction to: Plasmonic enhanced multifunctional composite photoanode for highly efficient dye‑sensitized solar cells	13
Photocatalytic properties of BiFeO3 (BFO) synthesized by microwave-assisted hydrothermal method	13
Electrochemical characterization of conversion coatings of phosphates plus nanostructured TiO2 over magnesium in a simulated body fluid	13
2,6-Di-tert-butyl-p-benzoquinone enhances biofilm redox activity and extracellular electron transfer	13
Enhanced pitting resistance of Al-based coating by synergistic passivation effect from different shapes of Ni/Cr powders	13
Ag2V4O11: from primary to secondary battery	13
The control of morphology and structure of galvanostatically produced tin dendrites by analysis of chronopotentiometry response	13
Closed-chamber oxygen sensor for fuel inerting based on electrochemical oxygen pump	13
Electrochemical traditions in Eastern Europe	13
Nickel-bipyridine-benzoic acid ternary complex: A new corrosion inhibitor for carbon steel in acidic medium	13
Carbon paste electrodes in laboratory exercises for students	13
Flower cluster trees like Ti/Co3O4@NiZnNC composite electrodes derived from MOF for dyeing wastewater (reactive Brilliant Blue KN-R) degradation	13
Superionic fluoro-niobium co-modified yttrium-based chloride solid-state electrolytes for highly stable Li metal in all-solid-state Li batteries	13
Electrodeposition of Fe-doped PbO2 and its electrocatalytic application for removal of Reactive Yellow 14	13
Theoretical analysis of surface electrode reaction coupled with preceding chemical reaction under conditions of differential square-wave voltammetry	13
Fabricating Co3O4–Co2MnO4 based type-II heterostructure architecture with prominent photoelectrocatalytic performance toward water purification	13
Reinforced corrosion resistance of mild steel in acidic medium by bis(2-acetylpyridine)dithiosemicarbazone (DTSc): electrochemical, surface and spectroscopic studies	13
A study of the thermodynamic stability of lattice oxygen in Li-rich cathode Li1.25Ni0.5Mn0.25O2 during operation	13
Electrochemical co-reduction of Mg(II), Al(III) and Nd(III) in the LiCl-NaCl-MgCl2-AlF3 melts	13
Effect of hydrocarbon chain length of alkyl trimethyl ammonium bromide on corrosion inhibition of stainless steel in sulfuric acid	13
High-performance Fe-MoS2@PPy nanostructures for portable sports energy supply	13
Single-source realization of Na-doped and carbon-coated LiMnPO4 nanocomposite for enhanced performance of Li-ion batteries	13
Electrochemical corrosion and impedance studies of Ti-30Zr-xNb (x = 7, 10, 13 at.%) alloy in simulated downhole environment	13
Facile preparation of tetrafluoro-substituted cobalt phthalocyanine nanorods attached on carbon nanotubes for efficient electrocatalytic CO2 reduction	12
Electroanalytical instrumentation—how it all started: history of electrochemical instrumentation	12
Correction to: Electrochemical behavior and compressive strength of Al-Cu/xCu composites in NaCl solution	12
Retraction Note to: Nickel modified ionic liquid/carbon paste electrode for highly efficient electrocatalytic oxidation of methanol in alkaline medium	12
Manganese-doped zinc sulfide binary nanostructures as binder-free electrode materials for supercapattery	12
Structure heterogeneity in polycrystalline and single-crystal high-nickel cathode materials by synchrotron radiation XAS	12
3D interconnected MOF-derived asymmetric bilayer solid-state electrolyte for enabling homogeneous Li deposition of all-solid-state lithium metal batteries	12
Electrochemical sensor based on covalent organic framework loaded with FeCr2O4 nanoparticles for highly sensitive detection of amoxicillin	12
Sensitive and selective detection of 4-nitrophenol using a zirconium metal–organic framework loaded reduced graphene oxide modified glassy carbon electrode	12
A novel N-Gr/polypyrrole(Ppy)-based molecularly imprinted electrochemical sensor for quality evaluation and toxicity monitoring of aconitine	12
The Helmholtz model	12
A comparative analysis of square-wave voltammetry and multi-frequency electrochemical Faradaic spectroscopy for kinetic characterisation	12
Electrochemistry and education	12
Template-assisted electrodeposition of freestanding antimony, tin, and antimony-tin nanowire arrays from an ionic liquid	12
Wittstock G: Lehrbuch der Elektrochemie. Grundlagen, Methoden, Materialien, Anwendungen	12
Improved lithium storage performance of sulfur loaded by CMK-3 with a tailored hierarchical pore structure	11
The microdefects and enhanced electrochemical performances of nano-VO2(B) induced by Mg doping	11
Time-modulated morphological structure of NH4V4O10 and its application to aqueous zinc ion batteries	11
Electrochemical synthesis and characterization of Cu2O nanoparticles: Effect of electrolyte composition	11
The effect of small silver inclusions on the palladium activity in formic acid oxidation reaction and corrosion stability	11
Comparative analysis of pH sensing performance of nitrogen-doped ZnO on screen-printed silver and carbon electrodes	11
N-doped porous carbon-supported CoxPy/NixPy catalyst with enhanced catalytic activity for hydrogen evolution reaction in alkaline solution and neutral seawater	11
Electrochemical performance of gold electrode in aqueous solution, containing fullerenol-d (C60(OH)24): the possibility of direct detection of fullerenol-d in aqueous solutions	11
Fabrication of ternary Cu-Sb-Te thin films by electrochemical co-deposition strategy at one-stage process	11
Stability and efficiency improvement of TiO2-based dye-sensitized solar cells by surface modification of MgO	11
Facile soft solution synthesis of delafossite structured Cu(Cr1-xFex)O2 (x = 0, 0.5, and 1) materials and their supercapacitor application	11
Comparative study of electrochemical performance of 3D leaf-like MnO2 and Mn2O3 powder for supercapacitor application	11
Surface wettability, electrochemical, and magnetic behavior of ternary M-Cu-Fe oxide (M: Li, Mg, Cr) nanocomposites	11
Enhancing dye-sensitized solar cell performance; optimization of quaternary counterion-based gel polymer electrolyte without changing additives or net-ion composition	11
Electroanalytical determination of darunavir as antiretroviral drug by a sensor containing synthesized reduced graphene oxide	11
Synthesis and characterization of PVA-based binary-gel electrolytes including massive ions	11
Around the world in electrochemistry: a review of the electrochemistry curriculum in high schools	11
Editorial to the special topical issue “Electrochemistry in Emerging Human Health”	11
Synthesis of TiO2/ZnO/Au for application in a new type of paper-based photo-microfluidic fuel cell using human blood	10
Electrochemical characteristics of composites based on novel asymmetric pillar[5]arene with carbon materials and their potential electrochemical applications	10
Synthesis and enhanced electrochemical properties of LiNi0.6Co0.2Mn0.2O2 cathode materials via SDBS-assisted hydrothermal method	10
Impact of ball milling on the energy storage properties of LiFePO4 cathodes for lithium-ion batteries	10
Naphthoquinone-intercalated vanadium oxide for high-performance zinc-ion battery	10
Cathode materials for lithium-sulfur battery: a review	10
Pt-Ni alloy catalyst supported on carbon aerogel via one-step method for oxygen reduction reaction	10
Development of a label-free impedimetric immunosensor for the detection of respiratory syncytial virus	10
Experimental evaluation of energy efficiency and structural efficiency of ultra-thin carbon fiber composite structural battery tube	10
A new MnxOy/carbon nanorods derived from bimetallic Zn/Mn metal–organic framework as an efficient oxygen reduction reaction electrocatalyst for alkaline Zn-Air batteries	10
Tin (Sn)-doped hematite (α-SnxFe2-xO3) nanostructures as high-performance electrodes for supercapacitor application	10
pH controlled synthesis and photoelectrochemical kinetics of bismuth molybdate (Bi2MoO6) nanoplates as photoanodes for solar-driven water splitting	10
In situ derived volcanic rock-like hydrates of nickel and cobalt sulfates on nickel-cobalt metal-organic framework for high-performance supercapacitors	10
Bi2S3-sensitized TiO2 nanorods by bottom-up approach for photoelectrochemical solar cell	10
Interface and lattice co-modification improve electrochemical performance and air-storage stability of nickel-rich cathode	10
Nano-TiNb2O7/CNTs composites with pseudocapacitive behavior for superior lithium-ion storage	10
Features of In particle electrodeposition from aqueous solutions	10
Formic acid oxidation on Pd/RuO2: does the RuO2 support enhance the electrocatalytic activity of Pd nanoparticles?	9
Dual-coated single-crystal LiNi0.6Co0.2Mn0.2O2 as high-performance cathode materials for lithium-ion batteries	9
Pd-H as an irreplaceable model system for the study of hydrogen electrosorption in aqueous and non-aqueous electrolytes	9
Bimetallic Bi-In nanoparticles for efficient production of formate via electrocatalytic conversion of CO2	9
Preparation and electrochemical properties of purified pitch-based capacitive carbon	9
Electrodeposition of polypyrrole for high-performance zinc ion battery	9

One-pot preparation of Co-NCNT/VN/V2CTx composite with a core–shell structure and its application in supercapacitors	9
Self-healable Nafion-poly(vinyl alcohol)/phosphotungstic acid proton exchange membrane prepared by freezing–thawing method for direct methanol fuel cell	9
Influence of iso-valent Al3+ doping on the electrocatalytic activity of La0.5Sr0.5Co0.8Fe0.2−xAlxO3−δ (x = 0–0.2) perovskite oxides	9
A carboxylate group modified the electrochemistry and photovoltaic properties of vanillin-substituted zinc porphyrin dye	9
Synthesis of CuO/WO3/gC3N4 nanocomposite for the sensitive and selective electrochemical detection of H2O2	9
In-depth research into the synergistic inhibition mechanism of amino acids and KI on the corrosion of carbon steel in acidic medium	9
Yttrium isovalent doping of proton conductor BaLa2In2O7: structure, proton uptake, ionic transport	9
Corrosion analysis of graphite sinter as bipolar plates in the low-temperature PEM fuel cell simulated environments	9
Hierarchical MoS2 incorporated Ti3C2 MXene nanohybrids system for enhanced supercapacitor application	9
Fabrication of high-performance silicon anode materials for lithium-ion batteries by the impurity compensation doping method	9
Enhanced performance of Sr2Fe1.5Mo0.5O6-δ electrode by infiltrating dual functional barium carbonate nanoparticles in symmetrical SOFCs	9
Tc doping in V$$_{2}$$O$$_{5}$$ as an Li-ion battery cathode to enhance the electrochemical performance: A first-principles study	9
Synthesis and electrochemical performance of CeO2@CNTs/S composite cathode for Li–S batteries	9
A short review on fast charging of Ni-rich layered oxide cathodes	9
Novel N-doped carbon encapsulation of nanoFe3O4 to improve electrochemical properties of lithium ion battery	9
Modelling diffusion controlled electro-deoxidation of metal oxide to metal in molten salt	9
Evaluation of an organic acid descaling solution for removal calcareous scales on pipelines	9
Investigation of polyaniline electrodeposition on hydrophilic/hydrophobic carbon cloth substrates for symmetric coin cell supercapacitors	9
Monolayer 1 T-Phase TaSe2 for High-Performance Li+ and Na+ storage	9
Oxford chemistry primers. Electrode potentials. 2nd Edition	9
An ameliorated interface between PEO electrolyte and Li anode by Li1.3Al0.3Ti1.7(PO4)3 nanoparticles	9
The density of states in electrolyte solutions	8
Research progress and prospect in element doping of lithium-rich layered oxides as cathode materials for lithium-ion batteries	8
Multi-dimensional Pt–Mo/Co@NC nanocomposites with low platinum contents for methanol oxidation	8
Ceramicized NASICON-based solid-state electrolytes for lithium metal batteries	8
Voltage decay for lithium-excess material of Li[Li1/5Co2/5Mn2/5]O2 during cycling analyzed via backstitch method	8
On how interactions influence kinetic limitations in alkali-ion batteries. Application to Li-ion intercalation into graphite through voltammetric experiments	8
Incorporating of sulfo ethyl cellulose to augment the performance of sulfonated poly (ether ether ketone) composite for proton exchange membrane fuel cells	8
Polyantimonic acid-based materials evaluated as moisture sensors at ambient temperature	8
Investigating the bifunctional electrocatalytic activity of nickel oxide/nitrogen-doped reduced graphene oxide nanocomposite for zinc-air battery application	8
Three-dimensional modeling of anode-supported planar SOFC with different shapes of corrugated electrolytes	8
The power of in situ spectroelectrochemistry for redox study of organometallic and coordination compounds	8
Zn(ClO4)2 aqueous solution–based Zn thin foil|carbon cloth two-electrode single-cell characteristics	8
Introduction of a new dichlorophen electrochemical sensor relying on the modified glassy carbon electrode (GCE) with carboxyl-functionalized graphene oxide/poly (L-arginine)	8
High-performance P2-type Na0.7Co0.1Fe0.1Mn0.8O2 cathode materials for sodium-ion batteries	8
Working mechanism of CTAB as an inhibitor of platinum anode sulfur passivation	8
Some remarks on the Peltier heat in the thermoelectric phenomena	8
Electrochemical corrosion evaluation of a steel–concrete system with surface treatment of silicon nanoparticles	8
Li concentration change around Cu/LiPON interface measured by TOF-ERDA	8
Effect of surface roughness on contact resistance and electrochemical corrosion behavior of 446 stainless steel in simulated anode environments for proton exchange membrane fuel cell	8
A novel electrochemical sensor based on CS/ACK@CeO2/GCE for high selectivity and sensitivity analysis of baicalin in complex samples	8
Ultrasonic energy field-assisted layer milling using side-wall-insulated cathode	8
Facile synthesis of integrated electrode-separator-electrolyte hydrogel for solid-state supercapacitor	8
Correlation between morphology and hardness of electrolytically produced copper thin films	8
Development of a composite graphene-Prussian blue-chitosan sensor for monitoring peroxide within Lactobacillus johnsonii DSM 10533 cultures	8
Development and evaluation of a novel flexible UV-LED TiO2/graphite photoanode for the removal of organic pollutants in water	8
Dual-photoelectrode photoelectrochemical cell exploiting a photoanode based on cadmium sulfide and anatase TiO2 photocatalysts for tannic acid detection	8
Sulfur-doped carbon coating on K2Ti6O13 nanowires as anode of sodium ion batteries	8
Study of corrosion rate control mechanism based on magnetorheological electro-Fenton composite polishing of single-crystal GaN wafers	8
NaV(SO4)2/C, Na3V(SO4)3/C, and K2VO(SO4)2/C: three Li-free vanadium sulfate cathode materials for lithium-ion batteries	8
Fructose sensing via a flexible photoelectrochemical microfluidic fuel cell based on a ZnO/praseodymium composite	8
Screen-printed electrode modified with a composite based on Amburana cearensis gum, multi-walled carbon nanotubes, and gold nanoparticles for electrochemical determination of total isoflavones in soyb	8
Effect of the length of TiO2 nanotubes on the photoelectrochemical oxidation of phenylacetic acid anions	8
Tuning crystal water of α-MnO2 with enhanced diffusion kinetics for zinc-ion batteries	7
Lead–carbon hybrid ultracapacitors fabricated by using sulfur, nitrogen-doped reduced graphene oxide as anode material derived from spent lithium-ion batteries	7
Morphology, semiconductor properties, and chemical stability of AG(I) oxide anodically formed on silver and silver alloys	7
Toward highly active electrochemical CO2 reduction to C2H4 by copper hydroxyphosphate	7
Physicochemical analysis of activated charcoal/solid biopolymer electrolyte (gellan gum) with NaI/Na0.60CoO2 towards solid-state Na-ion battery application	7
Investigation of ZnO nano-filler-dispersed nano-composite polymer electrolytes and their ion transport property	7
MOF-modified electrodes applied as electrochemical sensors for voltammetric determinations	7
Improved Ga-doped Li7La3Zr2O12 garnet-type solid electrolytes for solid-state Li-ion batteries	7
Evaluation of H2O2 electrogeneration and tebuthiuron degradation by photo-electro-Fenton from a carbon-based gas diffusion electrode modified with Zn-zeolitic imidazolate framework	7
On the semiempirical correlation between optical band gap of hydroxides and the difference of electronegativity of their constituents: a review and a critical assessment	7
Silicate-modified silicon for advanced lithium-ion battery anode materials	7
Inhibiting effect of tin additives on the solid-phase conversion of PbSO4 to PbO2	7
Synthesis of Co4S3/Co9S8 nanosheets and their Fe/Cr dual heteroatom co-doped components for the promoted OER properties	7
Application of various plasma sources in electrocatalyst synthesis and modification	7
Electric double layer effect in the vicinity of solid electrolyte/diamond interfaces and the application to neuromorphic computing	7
Spinel LiNi0.5Mn1.5O4 with ultra-thin Al2O3 coating for Li-ion batteries: investigation of improved cycling performance at elevated temperature	7
Molybdenum disulfide as a propitious electrochemical sensing material: a mini review	7
Electrochemical sensing interface of copper-coordinated polyhistidine/functionalized multi-walled carbon nanotubes for shikonin determination	7
Thiourea treatment broadens the lattice structure to enhance the electrochemical stability of lithium-rich manganese-based materials	7
3D carbonaceous substrates synthesized from melamine sponges for energy storage: Influence of pyrolysis temperature in physicochemical and electrochemical properties	7
Synthesis of MnO2/ZIF-8 for the construction of Pt-free counter electrode for dye-sensitized solar cell applications	7
Supercapacitor performance of polymer-in-salt electrolyte/water-in-polymer salt electrolyte synthesized by complexing glutaraldehyde crosslinked corn starch with Mg(ClO4)2	7
Construction of high-performance N-doped carbon-coated LiMn0.8Fe0.2PO4 cathode by PECVD technology for lithium-ion batteries	7
Nanoarchitectonics of planar organic electrochemical transistors for biological applications and electrochemical sensors	7
Electrochemical characterization of naproxen and the adsorbed naproxen oxidation products at glassy carbon electrode modified with carboxyl functionalized multi-walled carbon nanotubes and introducing	7
Electrochemical sensors based on antimony tin oxide-Prussian blue screen-printed electrode and PEDOT-Prussian blue for potassium ion detection	7
CeO2/Ce2S3 modified carbon nanotubes as efficient cathode materials for lithium-sulfur batteries	7
Modification of electrodes with self-assembled monolayers—general principles	7
Theory–experiment interaction as a cornerstone of specialized electrochemical education: Invent your own less conventional problems	7
Graphene/Nafion ink-impregnated graphite felt for both positive and negative sides of enhanced vanadium redox flow battery	7
Lead phosphate prepared from spent lead compounds as a negative additive for lead-acid batteries	7
New electrochemical method for separation of the iodine-131 radiopharmaceutical produced from uranium-235 fission	7
Effect of organic electrolyte and voltage on electrochemical performances and capacity degradation for Li-ion hybrid capacitors based on Nb2O5 anode	7
Thermal conductivity of Y2O3-stabilized ZrO2 cubic single crystals: effects of defect structure	7
Facial design and synthesis of CoAl-LDH-doped MXene with nanosheet structure for high-performance asymmetric supercapacitors	7
Nanocomposite TiO2@CNTs for high-voltage symmetrical supercapacitor in neutral aqueous media	7
Exploring nucleation modeling of the voltammetry of solid-to-solid-state redox processes with phase changes	7
Manganese electrochemistry—a pillar of development of electrochemistry in Georgia	7
Structural, electrical, optical, and microstructural properties of Bi4V2-xCux/2Sbx/2O11-3x/4	7
Development of paper devices with conductive inks for sulfanilamide electrochemical determination in milk, synthetic urine, and environmental and pharmaceutical samples	6
Electrochemical characterization of electrolyte supported solid oxide electrolysis cell during CO2/H2O co-electrolysis	6
Fabrication of MWCNT-nickel MOF modified glassy carbon electrode for voltammetric determination of levofloxacin	6