OOIR: Observatory of International Research

Papers

(The median citation count of Journal of Orofacial Orthopedics-Fortschritte der Kieferorthopadie is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)

Article	Citations
Can IGF-1 serve as a reliable skeletal maturity indicator? A meta-analysis	33
Is wear time of Hawley retainers measured with microsensors related to mandibular arch stability?	25
Mitteilung des Präsidenten der DGKFO	19
Cephalometric analysis of parents of patients with cleft lip and/or palate	18
Authors’ response to: The problem in visualization and measuring tiny structures on CBCT-images	16
Manual vs. interactive power toothbrush on plaque removal and salivary Streptococcus mutans and Lactobacillus casei levels	15
A three-dimensional method to calculate mechanical advantage in mandibular function	15
Three-dimensional localization of tooth germs without ionizing radiation	13
Effects of miniscrew-facilitated micro-osteoperforations on the rate of orthodontic tooth movement	13
Effect of applying intermittent force with and without vibration on orthodontic tooth movement	12
Age-dependent interactions of maxillary sutures during RME and their effects on palatal morphology	12
Can MRI be a potential substitute for CT in cephalometric analysis for radiation-free diagnoses?	11
2D-to-3D: Predicting three-dimensional (3D) cephalometric measurements from two conventional X-ray images	11
Comparative assessment of frictional forces between differently designed esthetic brackets during simulated canine retraction	10
Facial and dental arch shape in individuals with different bite force levels	9
Upper arch dimensional changes with clear aligners in the early mixed dentition	9
Effect of thermomechanical aging on force system of orthodontic aligners made of different thermoformed materials	9
Evaluation of torsional strength and torque presentation of coated rectangular stainless steel archwires, an in vitro study	8
Effects of offset design on the accuracy of bracket placement with a guided bonding device	8
Sliding behaviour and surface quality after static air polishing of conventional and modern bracket materials	8
Mitteilungen der DGKFO	7
The effects of professional expertise on perceptions of treatment need in patients with class II division 1 malocclusion: a comparison between orthodontists, general dentists, and lay people in German	7
Standardized assessment of bone micromorphometry around teeth following orthodontic tooth movement	7
Effect of using different component combinations for orthodontic bracket bonding with self-etch primers	7
Dentoalveolar alterations after interventions to relieve mouth breathing	7

Ramal inclination in the frontal plane after bimaxillary orthognathic surgery in skeletal class III facial asymmetry	7
Mitteilungen der DGKFO	6
Effects of varying attachment positions on palatal displacement of maxillary incisors with clear aligner therapy	6
Mitteilung des Präsidenten der DGKFO	6
Anatomical and immunohistochemical analyses of the fusion of the premaxillary–maxillary suture in human fetuses	6
Does orthodontic treatment need have an impact on oral health-related quality of life?	6
Treatment of skeletal class III malocclusion using a combined clear aligner and surgery-early approach	6
Mitteilungen der DGKFO	6
Development and in vitro testing of an orthodontic miniscrew for use in the mandible	6
Comparison of shear bond strength and residual adhesive remnants on the enamel surface after debonding of three different orthodontic molar tubes	6
Longitudinal analysis of bite force and strength of orofacial tissues during orthodontic aligner treatment	6
Correction to: Frequency and variability of nonmetric dental crown traits of primary and permanent molars in a group of orthodontic patients	5
Quality of orthodontic care—A multicenter cohort study in a German convenience sample	5
Three-dimensional analysis of posttreatment tooth movements despite bonded retainers: part II—lower jaw	5
Individual dental and skeletal age assessment according to Demirjian and Baccetti: Updated norm values for Central-European patients	5
Mobile app for comprehensive management of orthodontic patients with fixed appliances	5
Comparison of the asymmetry index determined on digital panoramic radiographic images and on posteroanterior cephalometric images: a retrospective cross-sectional study	5
New bone-generative effect of Salvia officinalis L. in the expanded midpalatal suture	5
Effect of various orthodontic adhesives on enamel colour changes after fixed treatment	5
Global scholarly output on orthodontic temporary anchorage devices (TADs): A silver jublee scientometric analysis	5
Relationship between the mandibular curve of Spee and the maxillary compensating curve with dentoskeletal morphology	5
Comparative biomechanical analysis of four different tooth- and bone-borne frog appliances for molar distalization	5
Skeletal maturation and the location of the mandibular foramen within the ramus mandibulae	5
Prevalence of malocclusions in 8- and 9-year-old children in Germany—Results of the Sixth German Oral Health Study (DMS 6)	5
Mitteilungen der DGKFO	4
Influence of the design of 3D-printed indirect bonding trays and experience of the clinician on the accuracy of bracket placement	4
Low translational and rotational movements with 2-point stainless-steel retainers over a period of 1 and 3 years	4
A novel machine learning model for class III surgery decision	4
Correction to: Bonded lingual retainer adhesives and discoloration	4
Correction to: Influence of functional and esthetic expectations on orthodontic pain	4
Age-dependent effects of Delaire facemask therapy for class III malocclusion	4
Mitteilungen der DGKFO	4
Does puberty affect oxidative stress levels and antioxidant activity of saliva in patients with fixed orthodontic appliances?	4
Relationship between craniofacial and dental arch morphology with pharyngeal airway space in adolescents	4
Bond strength, degree of conversion, and microorganism adhesion using different bracket-to-enamel bonding protocols	3
Functionality testing of an innovative biomechanically optimized and surface-modified orthodontic mini-screw—a comparative study	3
Changes in strain energy density in the temporomandibular joint disk after sagittal split ramus osteotomy using a computed tomography-based finite element model	3
Biomechanical effects of a new crimpable gate spring combined with conventional rectangular archwires for torque adjustment of individual anterior teeth	3
Mitteilung des Präsidenten der Deutschen Gesellschaft für Kieferorthopädie	3
Mitteilungen der DGKFO	3
Effectiveness of piezoelectric-assisted orthodontic treatment	3
Effectiveness of surface treatment on bond strength of ceramic brackets to two types of CAD/CAM-prepared nanohybrid composites	3
Methylphenidate—effects on orthodontic tooth movement, orthodontically induced and nonorthodontic root resorption?	3
Fractal analysis of mandibular trabecular pattern following protraction facemask therapy	3
Age-dependent prevalence of malocclusions requiring treatment according to the KIG classification	3
Influence of functional and esthetic expectations on orthodontic pain	3
Therapeutic efficacy of individual head orthoses in infants with positional plagiocephaly	3
Hand eczema symptoms, exposures and skin care in orthodontics	3
Fixed orthodontic appliances and adolescents’ peer relations in school	3
Efficacy of a mobile phone application for the improvement of oral hygiene of patients undergoing fixed orthodontic treatment	3

In vitro study of structural and mechanical properties of latex and non-latex intermaxillary orthodontic elastics	3
The IL-17 level in gingival crevicular fluid as an indicator of orthodontically induced inflammatory root resorption	3
Facial recognition by cloud-based APIs following surgically assisted rapid maxillary expansion	3
Mitteilungen der DGKFO	2
Microbial contamination profile on esthetic elastomeric ligatures through the checkerboard DNA–DNA hybridization technique	2
Comparison between microporous and nanoporous orthodontic miniscrews	2
Low-level laser therapy, piezocision, or their combination vs. conventional treatment for orthodontic tooth movement	2
Prevalence of incidental findings in adult vs. adolescent patients in the course of orthodontic X-ray diagnostics	2
Can surgically assisted rapid palatal expansion (SARPE) be recommended over orthodontic rapid palatal expansion (ORPE) for girls above the age of 14?	2
Evaluation and comparison of planum clival angle in three malocclusion groups	2
Validation of a mathematical–geometrical model to calculate the length of an individual anterior arch	2
Effects of sagittal split osteotomy on brainstem reflexes	2
Mitteilungen der DGKFO	2
Accuracy of three-dimensionally printed retainers and aligners	2
Differences in third molar development and angulation in class II subdivision malocclusions	2
Third molar angulation and retromolar space after functional orthodontic treatment	2
Cephalometric evaluation of pharyngeal airway and tongue space following treatment with Herbst and AdvanSync appliances	2
Inadvertent side effects of fixed lingual retainers	2
Scanning electron microscopy evaluation of enamel surfaces using different air-polishing powders in the orthodontic setting: an in vitro study	2
Effects of fluorosed enamel on orthodontic bracket bonding	2
Evaluation of occlusal function during orthognathic therapy	2
Impacts of childhood malocclusion on the family	2
Functional orthopedic treatment for anterior open bite in children. A systematic review of randomized clinical trials	2
Role of chaperone-assisted selective autophagy (CASA) in mechanical stress protection of periodontal ligament cells	2
Alveolar bone changes around maxillary incisors after intrusion and retraction with controlled tipping versus bodily movement	2
Precision in dentistry: how PLA 3D printing settings influence model accuracy	1
Correction to: Effect of various orthodontic adhesives on enamel colour changes after fixed treatment	1
Radiodiagnostics of standard orthodontic radiographs—dental and extradental incidental findings	1
Soft tissue changes with skeletal anchorage in comparison to conventional anchorage protocols in the treatment of bimaxillary proclination patients treated with premolar extraction	1
Correction to: Effect of EMD on the orthodontically induced root resorption repair process in rats	1
Ideal treatment timing of orthodontic anomalies—a German clinical S3 practice guideline	1
Long-term changes in thickness, live/dead bacterial ratio, and mineral content in biofilm on ceramic and stainless steel orthodontic attachments	1
Coefficient of efficiency and effectiveness of functional appliances in class II malocclusion treatment	1
Effectiveness of surface polishing after debonding of metal brackets from different CAD-CAM materials	1
A new harmony box supplemented with gonial angle and age based on a growing Swiss population	1
In vivo assessment of artefacts in MRI images caused by conventional twistflex and various fixed orthodontic CAD/CAM retainers	1
Influence of surface treatments on the bond strength of metal brackets to CAD/CAM materials and discoloration after various refinishing procedures	1
Effect of tube debonding on the enamel surface in vitro	1
TNF reduces osteogenic cell fate in PDL cells at transcriptional and functional levels without alteration of periodontal proliferative capacity	1
Methodology of the Sixth German Oral Health Study (DMS 6) to survey tooth and jaw misalignment	1
Dentoskeletal effects of the cast-splint Herbst, twin-block, and twin-force bite corrector devices used to correct class II malocclusion	1
Ablation of FAM20C caused short root defects via suppressing the BMP signaling pathway in mice	1
Variation of the modulus of elasticity of aligner foil sheet materials due to thermoforming	1
No-primer adhesive vs. self-adhesive resin: bonding strength following LED curing	1
Influence of distal-end heat treatment in the properties of heat-activated NiTi archwires	1
Effects of maxillary expansion and protraction on pharyngeal airway dimensions in relation to changes in head posture and hyoid position	1
Friction and archwire engagement in contemporary self-ligating appliance systems	1
Effect of low-level laser therapy on en masse retraction in females with bimaxillary dentoalveolar protrusion	1
Discoloration of stretched colored elastomeric modules	1
Comparison of conventional two-dimensional and digital three-dimensional imaging in orthodontics	1
Frequency and variability of nonmetric dental crown traits of primary and permanent molars in a group of orthodontic patients	1
Periodontal health of unilateral labially vs. palatally impacted maxillary canines erupted by closed eruption technique	1
Investigation of the cleaning performance of commercial orthodontic cleaning tablets regarding biofilm removal on PMMA test specimens	1
Assessment of the quality of different commercial providers using artificial intelligence for automated cephalometric analysis compared to human orthodontic experts	1
Changes in the distribution of occlusal forces in the course of the orthodontic retention phase	1
Polylactic acid 3D printing settings and precision in dentistry	1
The problem in visualization and measuring tiny structures on CBCT-images	1
In vitro comparison of different composite resins for aligner attachment production	1
Mitteilungen der DGKFO	1
Skeletal maturation in different anteroposterior and vertical skeletal growth patterns in female subjects	1
Effect of light-emitting photobiomodulation therapy on the rate of orthodontic tooth movement	1
Thermocycling and single-tooth measurements in orthodontic aligners—importance for real-life and caveat	1
Effect of archwire size on the rate of canine retraction in adult women	1
Occlusal plane rotation and orthodontic decompensation: influence on the outcome of surgical correction of class III malocclusion	1
The intraoral permeability measurement as a screening for artifact formation by orthodontic products in MRI	1
Biomechanical model registration for monitoring and simulating large orthodontic tooth movements in the maxilla and mandible	1
Periodontal evaluation after maxillary expansion with a tooth–bone-borne expander in growing patients	1
Evaluation´ of mandibular alveolar bone in patients with different vertical facial patterns	1