Journal of Material Cycles and Waste Management

Article	Citations
Splitting tensile strength behavior of dredged sediment with cement stabilization and straw fiber reinforcement	64
Recycling of Carica papaya trunk fiber plies: experimental and analytical characterization	60
Assessment of risk propagation in an e-waste collection system using Bayesian networks	53
Predicting solid waste generation based on the ensemble artificial intelligence models under uncertainty analysis	49
An evaluation of the policies, strategies and legal framework for sustainable waste management in Mauritius	44
Preparation and characterization of phosphoric acid activation of granite powder and metakaolin-based geopolymer	43
Assessment of the geotechnical and environmental reuse potential of soil-like material recovered from Anantapur dumpsite, South India	42
Recovery of lithium and cobalt from used lithium-ion cell phone batteries through a pyro-hydrometallurgical hybrid extraction process and chemical precipitation	39
Evaluating the physical, mechanical, structural and tribological functionality of ecological composites constituted of bio-fillers extracted from eggshell residues	38
Composite biochar: a potential approach for comprehensively utilizing various solid wastes	34
Enhancing landfill mining assessments: a dual-method approach using electrical resistivity and UAV photogrammetry at Buriram landfill	33
Quantitative evaluation of solid waste management policies: the application of the policy modeling consistency index model in Pakistan	33
Optimizing hygroscopic performance of innovative and sustainable gypsum biocomposites through hybrid biowaste upcycling	31
Examining the effect of the particle modification on zinc tailing waste as a cementitious material in concrete: performance and toxicity assessment	31
Food waste management in the retail sector: challenges that hinder transition to circular economy	30
Comparative analysis of flotation agents for enhanced separation of acrylonitrile butadiene styrene and polystyrene mixtures	29
Physical and mechanical properties of particleboard mixed with waste ACQ-treated wood	28
A continuous high-efficient demetallization strategy for used lubricating oils resource utilization	27
Performance evaluation of dolomite production waste in development of sustainable concrete: hardened properties and ecological assessment	27
Feasibility of using polyurethane waste in the form of granules for civil construction	27
Comparative life cycle assessment of retort pouch and aluminum can for ready-to-eat bean packaging	26
Anticipation methods for management of ship oil spills on the sea	26
Treatment and recycling of spent lithium-based batteries: a review	25
Synthesis and characterizations of Zr(IV)-loaded orange waste for effective sequestration of Mo(VI) and W(VI) from water	24
Development of a waste incinerator based on high-temperature air combustion technology	24

Prediction of compressive strength in sustainable concrete using regression analysis	24
Comparative life cycle assessment of asphalt mixtures containing recycled concrete aggregate in Egypt	23
Real-time monitoring of agricultural waste conversion to bioethanol in a pneumatic system by optimized electronic nose	23
Fabrication of green composite fibers from ground tea leaves and poly(lactic acid) as eco-friendly textiles with antibacterial property	21
Encouraging sustainable clothing disposal: consumers’ social recycling motivations in Turkey	21
Service life of sewage culvert with bacteria coating from waste sludge and negative pressure method	21
Effect of maleic acid and pH on the preparation of α-calcium sulfate hemihydrate from phosphogypsum in Mg(NO3)2 solution	21
Study of chromium immobilization behavior in unbound and concrete bound ferrochromium slag	21
Interactions of operating parameters on the production of waste polypropylene pyrolysis oil: neural fuzzy model and genetic algorithm optimization	21
Evaluation of biomass pretreatment to optimize process factors for different organic acids via Box–Behnken RSM method	21
Investigation of physical and mechanical properties of mortars produced with recycled asphalt waste under the influence of high temperature	20
Potential end of life application of African star apple shell and waste toner powder as composite filler materials	20
Estimating the generation of recycled metals from obsolete motorcycles in Vietnam for ELV management	19
Kinetics assessment and modeling of biogas production by anaerobic digestion of food wastes and acclimated sewage sludge	19
Recalcitrant organic residue compositions and the resource recovery from a food waste treatment facility	19
An ICT driven intervention for transforming waste to wealth: methodic development and assessment of IVRI-Waste Management Guide App	19
Valorization of EVA waste from footwear industry as natural aggregates substitutes in mortar: the effect of granulometry	19
Hydrophilicity enhancement of low-temperature lignocellulosic biochar modified by physical–chemical techniques	18
Bacterial leaching of copper, zinc, nickel and aluminum from discarded printed circuit boards using acidophilic bacteria	18
Phosphate removal from landfill leachate using ferric iron bioremediation under anaerobic condition	18
Multi-objective solid waste classification and identification model based on transfer learning method	17
Characterization of compaction and CBR properties of recycled concrete aggregates for unbound road base and subbase materials in Vietnam	17
A review on the urban municipal solid waste management system of an Indian Himalayan state	17
Changing scenario of municipal solid waste management in Kanpur city, India	17
Towards zero-waste airports: a case study of Istanbul Airport	17
Ammonia flow analysis in the domestic fertilizer industry of South Korea	17
Utilization of rice husk ash for the treatment of leachate generated from Perungudi semi-urban solid waste dumping site of Chennai city, Tamil Nadu, India	17
Fabrication and characterization of lightweight aggregate prepared from steel mill sludge in one step	17
Closed-loop supply chain under different channel leaderships: considering different deposit–refund systems practically applied in China	17
Source identification of heavy metals and arsenic in biodegradable fractions of municipal solid waste: a case study of Izmir metropolitan city	17
Process modeling and economic assessment of converting municipal solid waste into solid fuel via hydrothermal processing: a case study in Vietnam	17
Assessment of the current municipal solid waste management system in Tehran, Iran: challenges and opportunities for sustainable development	17
Critical review on the evolution, properties, and utilization of plasticwastes for construction applications	17
Various acids functionalized polyaniline–peanut shell activated carbon composites for dye removal	16
Evaluation of different sewage sludges as a potential biodiesel source in Japan	16
Biostabilization process of undersized fraction of municipal solid waste with biochar addition	16
CO2 emission assessment of lightweight aggregate concrete using artificial lightweight and bottom ash particles	16
Investigation of gamma ray absorption levels of composites produced from copper mine tailings, fly ash, and brick dust	16
What makes residents more willing to participate in source separation of waste masks under the COVID-19 pandemic?	15
Phosphate sludge valorization as new alternative precursor for carbonated hydroxyapatite nanostructures: synthesis and characterization	15
Fractional factorial design of ultrasonic-assisted metal recovery from waste printed circuit board	15
New approach in the reuse of modified ground tire rubber as thermal and acoustic insulation to be used in civil engineering	15
Effect of pH on water durability of cellulose nanofiber-reinforced starch film	15
Valorization of brewer's spent grains to produce nutrient biodegradable plant pot	15
Methanogenic diversity changes in full-scale anaerobic digesters by co-digestion of food waste and sewage sludge	15
Evaluation of the implementation of a community-led solid waste management system: a case study	15
Novel devices for the extraction and recovery of rare-earth metals through recycling of waste	15
Effect of temperature and additives on recycled waterborne coating preparation and performance for construction and demolition waste reutilization	14
Dissolution recycling for recovery of polypropylene and glass fibres	14
Valorization of waste pond ash in cement mortars and prediction of mechanical properties by simple linear regression	14

Characterization and differentiation of dissolved organic matter in leachate derived from an old Japanese landfill site through Orbitrap mass spectrometry	14
Py-GC/MS and slow pyrolysis of tamarind seed husk	14
Assessment of smartphones’ components and materials for a recycling perspective: tendencies of composition and target elements	14
A facile approach for acid mine drainage treatment by the formation of Fe–Mn layered double hydroxide	14
Performance of concrete produced with alkali-activated artificial aggregates	14
Analysis of healthcare waste and factors affecting the amount of hazardous healthcare waste in a university hospital	14
Unmasking Malaysian preferences for effective plastic waste management: a choice experiment approach	14
A novel recycling method using machine vision to assist in the processing of stacked waste fans	14
Assessing cellular responses to milled recycled carbon fiber in alveolar macrophages	14
Optimization of municipal solid waste collection system: systematic review with bibliometric literature analysis	14
Impacts of a municipal solid waste classification policy on carbon emissions: case study of Beijing, China	13
Assessment of 150 TPD mechanical biological treatment (MBT) based municipal solid waste treatment and disposal facility	13
Anaerobic digestion of food waste with a selective mixed-microbial consortium and its evaluation with different optimization methods	13
Evaluation of geotechnical characterization of recycled sand as a sustainable replacement for natural sand	13
A study on plastic waste generation and disposal habits in riverside and coastal households towards the promotions of reducing plastic leakage into the ocean in Da Nang City, Vietnam	13
Comprehensive chemical characterization study of three major fruit residues from São Paulo State (Brazil): banana pseudostem, orange bagasse, and guava seed cake	13
Upcycling polyester fleece fabric waste into sustainable composites using glass microsphere modified epoxy matrix: performance investigation	13
Optimizing municipal solid waste recovery through density-based waste plastic segregation	13
Case study: enhancing methane production and polylactic acid decomposition in mesophilic anaerobic digestion system with hydrogen enrichment	13
Evaluation of circular economy practices for management of the reverse chain of electronic waste in Brazil	13
Shear behavior of reinforced concrete beams incorporating ferrochrome slag aggregate and fly ash	12
Impacts of washing and deodorization treatment on packaging-sourced post-consumer polypropylene	12
Correction: Effect of mechanical pre-treatment on the recovery potential of rare-earth elements and gold from discarded hard disc drives	12
Electronic waste management in schools: a case of Surabaya City, Indonesia	12
Purification of spent cathode carbon from aluminum electrolysis cells by alkali fusion-acid leaching process	12
Community-based design compost processor: its performance, economic, and environmental impact assessment	12
Utilisation of solid waste polyurethane foam as coarse aggregate in concrete: an experimental study with ecological and cost assessment	12
Recycling End-of-Use Medicines for sustainability: an empirical investigation of return intention	12
Prediction of higher heating value of solid fuel produced by hydrothermal carbonization of empty fruit bunch and various biomass feedstock	12
Assessment of solar drying of Brazilian pulp mill primary sludge	12
Recycling and recyclability index for end-of-life vehicle jeepneys in the Philippines	12
Assessment of greenhouse gas emissions in delhi landfills: analyzing factors affecting emissions and environmental implications	12
Catalytic effect of natural clays on properties and chemical structure of recycled polyethylene	12
Blending Linz–Donawitz and Blast Furnace slags with the Kambara reactor byproduct to improve their reuse in roadworks	12
Research on the microwave pyrolysis behavior of automotive shredder residue	12
Synthesis of high-quality graphene sheets via decomposition of non-condensable gases from pyrolysis of polypropylene waste using unsupported Fe, Co, and Fe–Co catalysts	11
Generic foresight model in changing hygiene habits with the pandemic: use of wet wipes in next generations	11
Non-catalytic and catalytic wet oxidation of landfill leachate over CuO and MoO3	11
Using volcanic tuff wastes instead of feldspar in ceramic tile production	11
Two-step harmless treatment of secondary aluminum dross (SAD) by vacuum distillation and alkaline roasting	11
Study to improve the reactivity of magnesium cations to CO2 for carbon capture and utilization technology using edible salt manufacturing plant wastewater	11
Eco-friendly recovery process of lithium from reduction roasting residue powder based on hydrothermal extraction	11
Quantifying the spatiotemporal evolution characteristics of medical waste generation during the outbreak of public health emergencies	11
Advances in the application of crop residues as aggregates and cementing materials in concrete	11
A facile method of resource recovery from bauxite residue by phosphoric acid treatment	11
Solid-state bioconversion of organic wastes into compost as bio-organic fertilizer by screened fungal isolates and its performance in agronomic usage	11
Improving immobilization efficiency and mechanism analysis of sodium hexametaphosphate on MgO-based cementitious material solidified MSWI FA	11
Evaluating the strength development of mortar using clinker fine aggregate with a combination of fly ash and its inhibitory effects on alkali–silica reaction and delayed ettringite formation	11
Techno-economic assessment of waste sorting scenarios regional case study: Madaba sorting plant, Jordan	11
Managing post-conflict demolition wastes in Gaza Strip: a case study on May 2021 conflict	11
Recycling and valorization of distilled grape marc through vermicomposting: a pilot-scale study	11
Novel grey-vector optimization of desiccation-induced shrinkage and strength of industrial waste-based soil-composite binder as sustainable construction material	11
Microscopic synchrotron X-ray analysis of mercury waste in simulated landfill experiments	11
Effect of plasticizer dosage on properties of multiple recycled aggregate concrete	11
Effects of heating rate and temperature on product distribution of poly-lactic acid and poly-3-hydroxybutyrate-co-3-hydroxyhexanoate	11
Material conversion from used oil sorbents by pyrolysis	11
University students’ awareness of e-waste and its disposal practices in Pakistan: a construction of the conceptual framework	10
Multi-criteria evaluation of suitable locations for temporary disaster waste storage sites: the case of Cavite, Philippines	10
Rare earths leaching from Philippine phosphogypsum using Taguchi method, regression, and artificial neural network analysis	10
Hazardous household waste management in Ukraine and Austria	10
Study on the mechanism and mechanical properties of magnesium oxychloride cement for blocking pollutants migration from electrolytic manganese residue	10
Potential of activated sludge-derived mixed microbial culture enriched on acetate to produce polyhydroxyalkanoates from various substrates	10
Experimental research on compressibility characteristics of recycled concrete aggregate: recycled tire waste mixtures	10
Implementation of agriculture waste for the synthesis of metal oxide nanoparticles: its management, future opportunities and challenges	10
Strength, mineralogical and microstructural studies on clayey soil stabilized by bio-stabilized waste ash with lime	10
Techno-economic evaluation of biofertilizer production using wastewater biosolids: case study from municipal wastewater treatment plants in northwest region of Russia	10
Analyzing the implementation of reverse logistics in the Accra metropolis plastic waste management	10
Mercury waste management in China: implications on the implementation of the Minamata Convention on Mercury	10
Large-scale utilization of desulfurization ash and fly ash for unfired production of high-strength road-base stones	10
Factors influencing the pyrolysis products of waste tyres and its practical applications: a mini topical review	10
A review of the mechanical properties and durability of concrete containing recycled seashells as a partial cement replacement	10
A study on a blockchain-based waste classification management model and the effect evaluation of the model based on the entropy matter-element method	10
Status of household solid waste in Bengaluru and its periphery: synergies and disjunctions between waste management practices and circular economy	10
Pro-environmental, pro-social, and pro-self motives in an extended goal-framing framework in driving household food waste	10
Mercury recycling technologies in its’ end-of-life management: a review	9
Towards sustainability through the circular economy of plastic packaging waste management in Rayong Province, Thailand	9
Extraction of bio-fillers from natural solid wastes (citrus limetta peel) and characterization of the physical, mechanical, and tribological performance of sustainable biocomposites	9
A review on calcium-rich industrial wastes: a sustainable source of raw materials in India for civil infrastructure—opportunities and challenges to bond circular economy	9
A comparison of the comprehensive municipal solid waste management systems of the region of Prague and the principality of Asturias. the influence of collection systems and municipality size on the wa	9
Recovery of precious metals from e-wastes through conventional and phytoremediation treatment methods: a review and prediction	9

A pathway to involve consumers for exchanging electronic waste: a deep learning integration of structural equation modelling and artificial neural network	9
Unraveling the environmental and economic impacts of fly ash utilization on mass concrete considering industry practices	9
Forecasting of municipal solid waste generation in China based on an optimized grey multiple regression model	9
Hydration properties of mixed cement containing ground-granulated blast-furnace slag and expansive admixture	9
Life cycle assessment of source separation of biowaste, pay as you throw systems and autonomous composting units in the Municipality of Katerini, Greece	9
Eddy current separation of broken lithium battery products in consideration of the shape factor	9
Phase transformation mechanism of boiler ash roasted with sodium salt for vanadium extraction	9
Exploring the comminution process of waste printed circuit boards in recycling: a review	9
Waste to energy: a decision-making process for technology selection through characterization of waste, considering energy and emission in the city of Ahmedabad, India	9
Production of durable high-strength self-compacting geopolymer concrete with GGBFS as a precursor	9
Seasonal quantification and characterization of solid waste generation in tertiary institution: a case study	9
Green-brick preparation method for the resource utilization of sewage sludge and phosphogypsum with a low heavy-metal pollution risk	9
Analysing medical waste transportation using periodic vehicle routing problem for Surabaya public health facilities	9
Recapitulating potential environmental and industrial applications of biomass wastes	9
Determinants of paper packaging waste: evidence across 28 EU countries	9
Applying electromagnetic surveys as pre-screening tools prior to open dump mining	9
Effect of the mixing ratio on the composting of OFMSW digestate: assessment of compost quality	9
Effective and innovative procedures to use phosphogypsum waste in different application domains: review of the environmental, economic challenges and life cycle assessment	9
Investigation of perfluoroalkyl carboxylic and sulfonic acids in leachates from industrial and municipal solid waste landfills, and their treated waters and effluents from their closest leachate treat	9
Characterization of coal gangue and coal gangue-based sodalite and their adsorption properties for Cd2+ ion and methylene blue from aqueous solution	9
Correction to: Preparation and properties of fly ash‑based geopolymer concrete with alkaline waste water obtained from foundry sand regeneration process	9
The current status of recycling technology for waste NdFeB resources	9
Effects of carbide slag on the performance of phosphogypsum backfill paste	8
Predicting the effect of promotion measures on waste separation behavior: a case study in Da Nang City, Vietnam	8
The impact of COVID-19 pandemic in medical waste amounts: a case study from a high-populated city of Turkey	8
Analysis and optimization of design parameters for recycled concrete modified with nano-CaCO3 considering environmental and economic and mechanical properties	8
Investigating the formal and informal cycle of waste management in Kerman using the CLD model	8
Scale development and empirical testing of semi-organizational low-carbon environmental citizenship behaviors: evidence from international students studying in China	8
Study on influence factors and control optimizations of sewage sludge drying and incineration system for energy conservation	8
Solid waste management planning for sub-district scale: a case study in Buleleng sub-district, Buleleng district, Bali province, Indonesia	8
Demonstration application of Chinese-made chlorine bypass system for stable cement kiln using calcium carbide residue as main raw material	8
Evaluation of physico-chemical and structural properties of biochar produced from pyrolysis of urban biowaste	8
Supporting circular economy through the use of red ceramic waste as supplementary cementitious material in structural concrete	8
Digested wastewater sludge dewatering process using water treatment plants chemical sludge and walnut shell activated carbon powder	8
Recovery of samarium and cobalt/iron oxide from SmCo magnets through acid baking and water leaching	8
Electronic waste management in Northern India: a regional case study of Chandigarh	8
Bio-hydrogen production from various waste resources through circular economy: current technologies and future perspective	8
Utilizing bottom ash from municipal solid waste incineration as a sustainable replacement for natural aggregates in epoxy mortar production: a feasibility study	8
The willingness to household waste disposal practices of residents in rural China	8
Release behavior of arsenic, chromium, and copper during heat treatments of CCA-treated wood	8
The impact of cognitive aversion toward mercury on public attitude toward the construction of mercury wastes landfill site	8
Study on phosphorus recovery from sludge-incinerated bottom ash to produce nitrogen–phosphorus compound fertilizer: Preparation method, transfer mechanism and practical application	8
The reuse of waste glass to enhance strength during the introduction of municipal sewage sludge in shale brick manufacturing	8
Spatiotemporal heterogeneity in medical waste generation and its related factors	8
Preparation and performance evaluation of high-strength phosphogypsum aggregates by compaction and hydration	7
Observation of non-recyclable plastic in recycling shops: present practice and potential usage	7
Arsenic, cadmium, lead and thallium in coal ash from individual household furnaces	7
Life cycle assessment of plastic waste management in Mozambique	7
Enhancing quality and strength of recycled coarse and fine aggregates through high-temperature and ball milling treatments: mechanisms and cost-effective solutions	7
Efficient recovery of electrode materials from lithium iron phosphate batteries through heat treatment, ball milling, and foam flotation	7
Factors affecting household solid waste source separation intention and disposal: a focus on Sri Lanka	7
Enhanced recovery of gold from aqua regia leachate of electronic waste using dithiocarbamate-modified cellulose	7
Challenges and opportunities for waste picker cooperatives during the COVID-19 pandemic: a comparative case study of 3 cooperatives in Sao Paulo State, Brazil	7
Application of an eco-feed produced by culturing Aurantiochytrium sp. strain L3W using solid food waste to produce poultry products enriched with ω-3 fatty acids	7
Development of environment-oriented base materials for seaweed beds by recycled materials	7
Hydrothermal defluorination of fluorobenzene in the presence of sodium hydroxide	7
Mechanical and thermal properties of bottom ash-based porous geopolymer as thermal insulation material for construction	7
Critical enablers and inhibitors for economic sustainability in the supply and demand of end-of-life vehicles in Malaysia: a SWOT analysis	7
Hydraulic conductivity of the polymer-modified bentonite -sand-phosphogypsum (PMB-S-PG) mixture under drying–wetting and freezing–thawing cycles	7
Recovery of Pd as PdO from Pd/SiO2 catalyst by leaching using hydrochloric acid	7
Automatic recognition of construction waste based on unmanned aerial vehicle images and deep learning	7
Aluminum dross: aluminum metal recovery and emerging applications	7
Review of carbon sequestration by alkaline industrial wastes: potential applications in landfill biogeochemical cover systems	7
Applicability of used disposable diapers for soil amendment and the effect of calcium supply	7
Thermal pre-treatment of reactive aluminium alloy waste powders	7
Mapping the material flows and recycling potential of tantalum in China: a rare and vital resource for the modern society	7
Mechanical recycling scenarios in India through the lens of plastic circular economy	7
Removal of Hg2+ ions by adsorption using (TiO2@MnO2)-NPs nanocomposite	7
Eco-friendly CaO-based catalysts derived from waste oyster shells for the oxidative coupling of methane	7
How material flow cost accounting contributes to the SDGs through improving management decision-making	7
Waste vegetable oil collection: a comprehensive logistics system for sustainable and efficient resource recovery	7
Insights into hazardous solid waste generation during COVID-19 pandemic and sustainable management approaches for developing countries	7
Process analysis and optimization of solid waste haulage in Enugu Metropolis	7
Review on the recycling of anode graphite from waste lithium-ion batteries	7
Wimplebin: an AI-based recycle bin for a better waste management	7
The intergenerational learning effects of a home study program for elementary and junior high school children on knowledge and awareness of plastic consumption	7
Recovery limitation due to metal loss to fiberglass particles during printed circuit board leaching and probable mechanisms	7
Mercury emission from sulfide/solidified mercury waste in a simulated landfill lysimeters	7
Correction: New approach in the reuse of modified ground tire rubber as thermal and acoustic insulation to be used in civil engineering	7
Development and its application of an advanced shaft furnace gasification technology for municipal solid waste in a commercial scale plant	7
AI technology for stable furnace operation and labor saving in energy-from-waste plants	7
Fluorine recovery through alkaline defluorination of polyvinylidene fluoride	7
Passive aerated in-vessel composting of food waste with the addition of Sabah ragi for campus sustainability: mass balance, dwarf crape jasmine growth and techno-economic study	6
Characterization of Cu2+ adsorption for eco-hydroxyapatite derived from limestone sludge via hydrothermal synthesis	6
Statistical analysis in estimating probable concentrations of representative chemical species in leachate: a solution for the source term of new or unmonitored landfills	6
Reclaimed rockwool fibers for thermally stable palm oil-based polyurethane foam	6
Leaching of rare earths from Abu Tartur (Egypt) phosphate rock with phosphoric acid	6
Reasonable water replenishment strategies can improve the fermentation efficiency and bacterial community of sheep manure composting on the Qinghai–Tibet Plateau	6
Study on the co-combustion process and mercury emission characteristics of sewage sludge-coal slime coupled fuel	6
Analysis of emergency situations at municipal solid waste landfills	6
Assessment of waste settlement models based on the long-term settlement data measured at a multi-stage MSW landfill in Korea	6
Ag recovery from waste printed circuit boards of cell phone for synthesis of Ag nanoparticles and their antibacterial activity	6
End-of-life vehicles research development in Malaysia: a comprehensive review with the integrated conceptual model of innovative sustainable manufacturing elements	6
Removal of carbon and dioxins from municipal solid waste incineration fly ash by ball milling and flotation methods	6
Mechanical behavior of inert waste landfills under seismic condition	6