OOIR: Observatory of International Research

Papers

(The median citation count of Macromolecular Materials and Engineering is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)

Article	Citations
High Porosity Poly(ether ketone ketone): Influence of Solvents on Foam Properties	149
Solvent‐Mediated Self‐Assembly and Hydrogen Bonding in Neutral Alginate: A Molecular Dynamics Study	92
Application of Molecularly Imprinted Polymers in Plant Natural Products: Current Progress and Future Perspectives	91
Polyphenol–Metal Functionalized Hydrogel Dressing with Sustained Release, Antibacterial, and Antioxidant Properties for the Potential Treatment of Chronic Wounds	87
Graphene Oxide‐Incorporated Polylactic Acid/Polyamidoamine Dendrimer Electroconductive Nanocomposite as a Promising Scaffold for Guided Tissue Regeneration	82
Masthead: Macromol. Mater. Eng. 6/2022	79
Masthead: Macromol. Mater. Eng. 5/2022	76
Design and Characterization of Decellularized Caprine Liver Matrix Constructs for Liver Tissue Engineering	71
Fabrication and DOE Optimization of Electrospun Chitosan/Gelatin/PVA Nanofibers for Skin Tissue Engineering	67
From Computational Screening to Enhanced Adsorption: Optimized Removal of Toxic Congo Red by Nitrogen‐rich Triazine Polymers	66
Polypyrrole Modified Granular Activated Carbon Nanocomposite for Treatment of Wastewater Containing Highly Toxic Hexavalent Chromium	65
MOFs and MOF‐Based Composites for the Adsorptive Removal of Ciprofloxacin	57
Dipentaerythritol‐Derived Hyperbranched Polyurethane Elastomers and Their Applications in Flexible Strain Sensors	55
Conductivity Insights Into the Carbon Nanotubes Mobility Restricted by the Long‐Branched Chains During the Thermal Annealing, Fast Shear Flow and Melt to Solid Cooling Process	55
Issue Information: Macromol. Mater. Eng. 8/2025	55
Improving Infection Resistance in Tissue Engineered Scaffolds for Tensile Applications Using Vancomycin‐Embedded Melt Electrowritten Scaffolds	52
Degradation and Mechanical Behavior of Fish Gelatin/Polycaprolactone AC Electrospun Nanofibrous Meshes	49
Development of Specially Designed Nanoparticle‐coated 3D‐printed Gelatin Methacryloyl Patches for Potential Tissue Engineering Applications	48
Development of Bioactive 3D Printed MC/Al/Gel/HA Scaffolds with Enhanced Printability, Flexibility and Mechanical Strength	47
Targeting MDA‐MB‐231 Cancer Stem Cells With Temsirolimus in 3D Collagen/PGA/Na₂SiO₃‐Based Bone Model	47
Design of Reversible Adhesives by Using a Triple Function of Ionic Liquids	44
Comparison between Injection Molding (IM) and Injection‐Compression Molding (ICM) for Mass Manufacturing of Thermoplastic Microfluidic Devices	44
PBAT/PLA Films and Supercritical Impregnation of Caffeine for Potential Application in Anticellulite Tools	42
Toward a Green Polymerization of Lignin‐Derived Monomers in Ethyl Lactate Solution or Aqueous Emulsion	42
An Injectable PEG/Diacerein‐Based Anti‐Inflammatory Hydrogel for Promoting Cartilage Regeneration: An In Vivo Study	42

Evolution of Oriented Crystals of Polypropylene for Capacitor Films Subjected to High‐Temperature Stretching	42
	41
Issue Information: Macromol. Mater. Eng. 2/2025	41
Advancing Surface‐Enhanced Electrospun Nanofiber Membranes: Customizing Properties for Enhanced Performance in Membrane Distillation	39
Recent Progress in Robust Regenerated Soy Protein Film	39
Wet Milling of Alginate Alco‐ and Hydrogel Composites: A Facile Top‐Down Approach for Continuous Production of Aerogel Microparticles	39
Interfacial Energy and Composition Controlled Self‐Stratification in Polyurethane Coatings	39
Biomass‐Based Composite Anion Exchange Membranes Using Quaternized Chitosan and Quaternized Polydopamine Nanoparticles for Enhanced Performance	38
Tough and Strong Waterborne Polyurethane Network Combined with Sub‐Nanoscaled Calcium Phosphate Oligomers for Protective Coating	38
Structural Characteristics of Fibrillar Crystals in Uniaxially Stretched Isotactic Polypropylene Dominated by Temperature and Strain	37
Oil‐Infused Polymer Fiber Membranes as Porous Patches for Long‐Term Skin Hydration and Moisturization	36
Infill Density Effects on the Mechanical and Thermal Properties of Copper‐Plated 3D Printed Parts	36
Melt‐Processable and Electrospinnable Shape‐Memory Hydrogels	35
Fine Structure and Swelling Properties of Fibers from Regenerated Rennet‐Treated Casein Micelles	34
Sound‐Insulation Performance of Polylactic Acid Parts 3D Printed by Fused Filament Fabrication with Functionally Graded Porous Structure for Effective Noise Reduction	34
Characterization of Copper‐ and Bronze‐Filled PLA: Mechanical, Structural, and Biological Insights for Biomedical 3D and 4D Printing	33
Deposition Patterns of Evaporating Sodium Alginate Sessile Droplets Cross‐Linked by Calcium Chloride	32
3D‐Printed Methane‐Producing Electrodes for Microbial Fuel Cells Developed Using Biogel Ink Containing Live Methanogens and White Charcoal	32
Shape Memory Thermoplastic Polyamide Elastomer Based on PA1212	32
Controllable Preparation of Porous Polypropylene Piezoelectrets Using Crystallization Self‐Reinforcement Method Induced by the Variable Thermal History	32
Enhanced Poly(Lactic‐Co‐Glycolic Acid) Composite for Bone Tissue Repair Applications: A Comprehensive Optimization Approach	32
¹⁹F NMR Relaxometry and Diffusometry for Measuring Cargo Molecule Dynamics in GelMA Hydrogels	31
Simulation‐Guided Design of Gradient Multilayer Microwave Absorber with Tailored Absorption Performance	30
Optimizing Electrospun PVA Fibers with MXene Integration for Biomedical Applications	30
	29
Additive Manufacturing and Characterization of Polystyrene for Thermal Insulation Applications	29
Swelling Behavior and Mechanical Stability of Composite Fibers Prepared from Casein Micelles and Calcium Alginate	28
Masthead: Macromol. Mater. Eng. 10/2024	28
Masthead: Macromol. Mater. Eng. 6/2024	28
Carbon Nanotubes Networking in Styrene‐Butadiene Rubber: A Dynamic Mechanical and Dielectric Spectroscopy Study	27
Correction to “Conductive Open‐Cell Silicone Foam for Tunable Damping and Impact Sensing Application”	27
4D Printing Nanocomposite Hydrogel Based on PNIPAM and Prussian Blue Nanoparticles Using Stereolithography	27
Polyethyleneimine Controlled Impregnation of Silver Nanowires on Electrospun Ceramic Sponges	27
High‐Throughput Electrospinning of Unmodified and Aminated Poly(Pentafluorostyrene) for Fiber‐Reinforced Proton Exchange Membranes	27
Evaluation of the Fusion Quality of Bead Foams Made from Polybutylene Terephthalate (E‐PBT) Depending on the Processing Temperature	26
Design of a Dual‐Responsive Bilayered Actuator with Alternating Active Layers	26
Amino‐Terminated Hyperbranched Polymer‐Based Recyclable Elastic Fibers for a Breathable and Antibacterial Triboelectric Nanogenerator	26
Happy Birthday, Rolf Mülhaupt!	26
Transdermal Administration of Nanobody Molecules using Hydrogel‐Forming Microarray Patch Technology: A Unique Delivery Approach	26
Microencapsulation of Lemongrass ( Cymbopogon citratus ) Essential Oil and Salicylic Acid via in Situ Polymerization and Their Immobilization onto a Cell	26
Influence of Block Copolymer Concentration and Resin Crosslink Density on the Properties of UV‐Curable Methacrylate Resin Systems	26
Laser Structuring of Polyamide Nanofiber Nonwoven Surfaces and Their Influence on Cell Adhesion	26
Porous Hydrogels from Nanoemulsion Templates With Different Structures	25
Polystyrene/Polyolefin Elastomer Blends Loaded with Halloysite Nanotubes: Morphological, Mechanical, and Gas Barrier Properties	25
Facile Synthesis of Fe₃O₄−SiO₂Nanocomposites for Wastewater Treatment	24
Electrospun Thermoplastic Polyurethane Fibrous Membrane Decorated with MXene/Carbon Black for Dual‐Mode Human Movement Monitoring and Energy Harvesting	24
Unveiling the Hidden Networks: AFM Insights into Pre‐Vulcanized Hevea Latex and Its Profound Impact on Latex Film Mechanical Properties	24
A 4‐Arm PEG‐Thiodepsipeptide Precursor Enables Gelatinase‐Promoted Hydrogel Formation	23
	23
Inverse Vulcanization of Elemental Sulfur with Natural Rosin to Prepare High Sulfur Content Polymers with Excellent Solubility and UV‐Blocking Performance	23

Engineering Thermoresponsive Emulsions with Branched Copolymer Surfactants	23
Optimization of Fiber Laydown During the Fiber Spinning Process by Utilizing the Coanda‐Effect	23
	23
Infill Density Effects on the Mechanical and Thermal Properties of Copper‐Plated 3D Printed Parts	23
Electrospun Fibers of Polyhydroxyalkanoate/Bacterial Cellulose Blends and Their Role in Nerve Tissue Engineering	23
	23
Nozzle‐Pressurized Gyration: A Novel Fiber Manufacturing Process	22
Anisotropic Enhancement in Thermal Conductivity of Graphene Foam/Polymer Composites Based on Uniaxial Compression	22
Fabrication of Zein‐Based Fibrous Scaffolds for Biomedical Applications—A Review	22
Adhesion and Cohesion Performance of Polyurethane Made of Bio‐Polyol Derived from Modified Waste Cooking Oil for Exterior Grade Plywood	22
Highly Aligned Centrifugal Spun Polyacrylonitrile Nanofibers Collected and Processed with Automated Tracks	21
Correction to “PEGylation Effects on the Interaction of Sphingomyelin Nanoemulsions with Serum Albumin: A Thermodynamic Investigation”	21
Plasma Carbonization of Sustainable Lignin Fiber‐Derived Papers for Supercapacitor Electrodes	21
A Novel Interface Agent for Preparation of High Gas Barrier Organic Montmorillonite/Brominated Butyl Rubber Nanocomposites	21
Thermal Structuring of Surface‐Attached Polymer Networks by C,H Insertion Reactions	20
Development of a Potential Multilayered Biofunctional Dressing for Localized Postoperative Cancer Treatment: A Hybrid Approach Using 3D Printing and Electrospinning	20
Low Power NIR‐LED Actuated MXene‐Loaded Photothermally Active Nanofibers	20
Adhesion Improvement of Bio‐Based Epoxy in Environmentally Friendly and High‐Performance Natural Fiber‐Reinforced Composites	19
Melt Electrowriting of Poly(dioxanone) Filament Using a Multi‐Axis Robot	19
Rhodamine B‐Modified Nanocrystalline Cellulose as Fluorescent Sensor for Fe³⁺ Ion Detection	19
Utilization of Ultrasonication as a Method of Reducing Organic and Inorganic Contamination in Post‐Consumer Plastic Film Waste	19
Morphology and Mechanical Properties of Poly(vinyl alcohol)/Poly(lactic acid) Blend Films Prepared from Aqueous Dispersions	19
Electron Beam‐Induced Bulk Modification of Silicone Rubber for Spheroid Formation Devices	19
Structure–Property–Processing Relations of Short‐Chain Branched Poly(butylene terephthalate) (PBT) with Biobased Comonomers	19
Anisotropic Enhancement in Thermal Conductivity of Graphene Foam/Polymer Composites Based on Uniaxial Compression	19
Innovative Thermosensitive Composite Materials: Merging Poloxamer PF‐127 and Polysaccharides for Enhanced Functional Properties	19
Investigation of the Reaction Kinetics of Poly(butylene terephthalate) and Epoxide Chain Extender	19
A Biofunctional Hydrogel/Nanofiber Bilayer Scaffold Delivering EGF and TGFβ3 for Advanced Nasal Tissue Reconstruction	18
Surface Modification of Polydimethylsiloxane via Combined Aminolysis and Alcoholysis Generating Cell Adhesive and Antifouling Properties	18
Self‐Assembled Patterns in Ferroelectric Polymer Thin Films: Formation and Implications	18
Nanofibrous Biomaterial Containing Raw‐Propolis Particles Encapsulated by PLA/PBS for Wound Dressing Application	18
Poly(Butylene Adipate‐Co‐Terephthalate)/Silane‐Treated Wollastonite‐Based Blown Film for Sustainable Packaging Application: Studying the Impact of Uniaxial Stretching on the Final Properties	18
Controllable Synthesis of Submicrometer Core–Shell Modifier and Its Effect on Toughening Polypheylene Ether/Polystyrene Blends	18
Quantification of Airborne Concentrations of Nanoscale Dusts by Particle Gravimetry Using Ionic‐Liquid Modified Polymeric Electrospun Fibers	18
Pressurized Gyration: Fundamentals, Advancements, and Future	18
Observation of Peek Melting Peaks within the Additive Manufacturing Material Extrusion Process in Relation to Isothermal and Non‐Isothermal Processes	17
Biomedical Applications of 3D‐Printed Polyamide: A Systematic Review	17
The Longitudinal and Transverse Piezoelectric Effects of the Ferroelectric Polymer P(VDF‐TrFE)	17
Patterning of RAFT Polymer Networks by Laser Deactivation	17
Polyamide12‐Meta‐Composites with Excellent Mechanical Performance, Shape‐Memory, Flame Retardancy and 3D/4D Printability	17
Lauric Acid Based Composite Phase Change Materials Form‐Stabilized with Highly Crosslinked Polymer for Thermal Energy Storage	17
In Situ Generation of Poly(3,4‐ethylenedioxythiophene)/Ag₂SeO₃ Nanohybrids at Hexane/Water Interface for Photodegradation of Organic Dyes	16
Synthesis of Nitrogen‐Rich Black Phosphorus via a Diazotization Strategy for Efficient Flame Retardancy and Mechanical Properties of Epoxy Resins	16
Side Illumination Behavior and Mechanical Properties of Twisted End‐Emitting Polymer Optical Fiber Bundles	16
Silica Nanofibers with Enhanced Wettability and Mechanical Strength for Bone Tissue Engineering: Electrospinning without Polymer Carrier and Subsequent Heat Treatment	16
ZnO/Cassava Starch‐Based Hydrogel Composite for Effective Treatment of Dye‐Contaminated Wastewater	16
Detailed Compositional and Structure–Property Analysis of Ethylene Oxide‐Propylene Oxide Triblock Copolymers	16
Cooperative Gelation of Syndiotactic Polystyrene and Low Molecular Weight PEGDME	16
Recycling of Epoxy Resin via Blending with Polycaprolactone for Fused Filament Fabrication 3D Printing Applications	16
High‐Performance Stretchable Ag/CNT/LCE Sensor with Anisotropic and Environmentally Adaptive Properties for Maxillo‐Facial Motion Monitoring	16
Mechanical and Thermal Properties of 3D‐Printed Biocomposites of Polylactic Acid and Thermally Modified Wood Flour with Silver Nanoparticles	16
Polysaccharide‐Based Food Packaging Materials: Structural Engineering, Functional Modifications, and Sustainable Applications	16
An Investigation into the Applicability of Wideline NMR for the Determination of Oil in Waxes	16
Fused Deposition Modeling of Polyolefins: Challenges and Opportunities	15
Direct Lithography for Regulating Multiple Properties of Organic Semiconductors via Photo‐Crosslinkers	15
A New Era of Modeling MOF‐Based Membranes: Cooperation of Theory and Data Science	15
Mesoporous Natural Fiber Welded Cellulose Containing Silver Nanoparticles as a Recyclable Heterogeneous Catalyst	15
Comparative Evaluation of Neural Networks and Transfer Learning for Predicting Mechanical Properties of 3D‐Printed Bone Scaffolds	15
Prediction of Morphology Distribution within Injection Molded Parts Obtained with Fast Cavity Heating Cycles: Effect of Packing Pressure	15
Morphology and Structure of PEDOT:Nafion: Insights from Experiment and Molecular Dynamics Simulations	15
Thiol‐Ene Photo Crosslinked PUA‐PUMA‐Based Flexible Gel Polymer Electrolyte for Lithium‐Ion Batteries	15
Issue Information: Macromol. Mater. Eng. 3/2026	15
Cellulose From Aloe Vera Plant Waste as Crosslinker for Vat 3D Printable Vitrimers: Toward a Circular Economy Approach in Additive Manufacturing	15
Effect of Fluorine and Copper Ions on Liquid‐Solid Triboelectric Nanogenerator	15
Intrinsically Flame‐Retardant Polyamide 6 by Anionic Ring‐Opening Copolymerization with a Phosphorous‐Containing Comonomer	15
Strong Tough Poly Acrylic‐co‐acrylamide Hydrogels via a Synergistic Effect of Fiber and Metal‐Ligand Bonds as Flexible Strain Sensors	15
Electrospun Nanofiber Platforms for Photodynamic Therapy: Role and Efficacy in Cancer, Antimicrobial, and Wound Healing Applications	15
Esters of Cinnamic Acid as Green Plasticizers for Polylactide Formulations with Improved Ductility	15
Composite Aerogel of Electropolymerized Polyaniline and SWCNTs with High Thermoelectric Performance	15
Review on Polymer Materials for Solid Desiccant Cooling System	15
Effect of Cowpea Lignocellulosic Fibers as a Low‐Value Reinforcing Filler on the Properties of Poly(butylene succinate‐co‐adipate) Bio‐Composite Foams	14
Microwave‐Assisted Synthesis of Chitosan–Iron Oxide (CS@Fe ₃ O ₄ ) Nanocomposite for Removal of Ca	14
¹⁹F NMR Relaxometry and Diffusometry for Measuring Cargo Molecule Dynamics in GelMA Hydrogels	14
Bio‐Macromolecular Surface Coatings for Autohesive, Transparent, Elastomeric Foils	14
Redispersible Polymer Powders with High Bio‐Based Content from Core–Shell Nanoparticles	14
Retraction: A Photoclick Thiol‐Ene Collagen‐Based Hydrogel Platform for Skeletal Muscle Tissue Engineering	14
Comparative Framework for Energy Absorption Capacity of Auxetics and Open‐Cell Foams	14
Masthead: Macromol. Mater. Eng. 9/2024	14
Plasma Immersion Ion Implantation Increases Adhesive Bond Strength of PEK and PEEK to Dental Composites and Enables Hydrolysis Resistance	14
Post‐Additional Proteins into Rubber Matrices Behave as Filler to Reinforce Rubber	14

Synergistic Compatibilization of LDPE/PS/PA6 Ternary Blends by Combining Reactive and Non‐Reactive Compatibilizers	14
Structuring Nanofibers of SMEC Sheets: A New Approach to Control Self‐Folded Shape by Uniaxial Stretching	14
Masthead: Macromol. Mater. Eng. 11/2023	14
Biomedical Efficacy of Garlic‐Extract‐Loaded Core‐Sheath Plasters for Natural Antimicrobial Wound Care	13
Highly Reliable Sensitive Capacitive Tactile Sensor with Spontaneous Micron‐Pyramid Structures for Electronic Skins	13
Recycled PET Packaging Materials of Improved Toughness— Importance of Devitrification of the Rigid Amorphous Fraction	13
Regenerative Polyphenolic Free‐Standing Conductive Film	13
Preparation and Assessment of Nitric Oxide‐Releasing Small‐Diameter Collagen‐Based Vascular Graft for Vascular Regeneration Applications	13
Preparation of Shell/Core Atypical Spiral Conductive Microfibers and Composite Membrane with Good Conductivity and Mechanical Properties	13
Sustainable Cellulose‐Based Coatings and Their Impact on Mechanical and Barrier Properties of Paper	13
Reactivity of Polysilazanes Allows Catalyst‐Free Curing of Silicones	13
Nanofiber‐Coated CF/PEEK Composite: Boosting Osteogenesis for Enhanced Bone Grafting	13
Anisotropic Lattice Thermal Conductivity in Highly Ordered PEDOT Fibers	13
Photocurable Methacrylated Silk Fibroin/Hyaluronic Acid Dual Macrocrosslinker System Generating Extracellular Matrix‐Inspired Tough and Stretchable Hydrogels	12
	12
3D Inkjet Printing of Biomaterials with Solvent‐Free, Thiol‐Yne‐Based Photocurable Inks	12
Post‐Consumer Mechanical Recycling of Thermally Degraded Glass‐Fiber Reinforced Polyamide 6,6 for Electrical Applications	12
Challenges in Processing Plant Proteins Using Electrospinning	12
	12
Mesenchymal Stem Cell‐Engrafted Bacterial Cellulose and Graphene Oxide Scaffolds Enhance Peripheral Nerve Repair in a Rat Model	12
Ion Track Formation and Nanopore Etching in Polyimide: Possibilities in the MeV Ion Energy Regime	12
High‐Performance Vitrimeric Benzoxazines for Sustainable Advanced Materials: Design, Synthesis, and Applications	12
In Situ Gels for Nasal Delivery: Formulation, Characterization and Applications	12
Understanding Photomechanical Behavior of Liquid Crystalline‐Based Actuators	12
CTAB‐Engineered Electro‐Blown PVDF Nanofibrous Air Filters with Enhanced Charge Retention, Filtration Efficiency, and Antibacterial Functionality	12
Kevlar/Basalt and Kevlar/Glass Intra‐Ply Reinforced Hybrid Composites: Influence of Basket Weave Fabric Structure on Thermal Properties, Flammability, and Impact Performance	12
Design Principles and Mechanics: A Review of Emerging Paradigms in Intervertebral Disc Regeneration and Replacement	12
	12
MoS₂‐Polyaniline Based Flexible Electrochemical Biosensor: Toward pH Monitoring in Human Sweat	11
Antimicrobial Biocomposites Fiber‐Welded with Lignocellulose Containing Silver Nanoparticles	11
Exploring Cross‐Link Density and Additive Effects on Mechanical and Morphological Behaviors of Cross‐Linked Polymers	11
3D Printable Self‐Sensing Magnetorheological Elastomer	11
Hard Coatings from Soft Latexes: A Review of Routes to Overcome the Film Formation Dilemma	11
Dual‐Control Mechanism of Water and Temperature in Automatically Programmable Shape Memory Polymers	11
Microstructured Scales in Porous Piezoresistive Vibration Sensor with Strain‐Rate‐Adaptive Gauge Factor	11
Structural and Optical Anomalies in Thin Films Grown in a Magnetic Field by Electron‐Assisted Vacuum Deposition of PTFE	11
Constructing the Relationship Between Microstructure and Properties of Perfluorosulfonic Acid Ionic Membranes	11
Cost‐Efficient Detection of Plastics From Post‐Consumer Packaging Waste Using Selected Bands in the Near‐infrared Spectrum	11
A Superabsorbent Sodium Polyacrylate Printing Resin as Actuator Material in 4D Printing	11
Fabricating Biodegradable Tissue Scaffolds Through a New Aggregation Triggered Physical Cross‐Linking Strategy of Hydrophilic and Hydrophobic Polymers	11
In Situ Incorporation of Liquid Polysulfide Oligomer Modified MoS₂ into Polysulfide Rubber (PSR) as Solid Crosslinker with Greatly Improved Dispersion Ability and Interfacial Interaction	11
Masthead: Macromol. Mater. Eng. 4/2024	11
Preparation and Properties of Novel Mucilage Composite Films Reinforced with Polydimethylsiloxane	11
	11
Variation of the Electrical Conductivity of PLA‐Based Composites with a Hybrid of Graphene and Carbon Black During 3D Printing	11
Synergistic Effects of Mechanical, Thermal, and Optical Properties of Polyimide Composite Films Reinforced with WO₃ Nanorods	10
Materials Requirements in Fused Filament Fabrication: A Framework for the Design of Next‐Generation 3D Printable Thermoplastics and Composites	10
	10
Facile Preparation and Improved Electrochemical Performance of Oxygen‐Enriched Porous Carbon Materials Based on Diacetal‐Containing Polybenzoxazine	10
Sustainable Macromolecular Materials in Flexible Electronics	10
Highly Bio‐Based Unsaturated Polyester Resins with Improved Performance by Incorporating Isosorbide into the Polyester Prepolymer	10
Enhanced Anticorrosion and Antifouling Properties of Lubricant‐Infused Pyramidal Polydimethylsiloxane Coating	10
Bioelectronic Hydrogels: Exemplifying the Synergy Between Biopolymers and Conjugated Polymers	10
Mycelium Agrowaste‐Bound Biocomposites as Thermal and Acoustic Insulation Materials in Building Construction	10
	10
	10
	10
High Power Sunlight‐Simulated UV‐Induced Radical Polymerization: Self‐Initiation and Self‐Crosslinking	10
Strategies to Improve the Water Resistance of Nanofibers Obtained by Suspension Electrospinning	10
Two‐Step Polyelectrolyte Complex Coating for Flame Retardant Flax	10
Investigation of the Dielectric and Electrical Properties of Poly(chloro‐p‐xylylene) (Parylene‐C) Layers for Controlling Charge Transport in Organic Field‐Effect Transistors	10
	10
Masthead: Macromol. Mater. Eng. 7/2023	10
Copolymerization of Aniline, Melamine and p‐Phenylenediamine for Enhanced Pseudocapacitance Hydrogel Supercapacitor Electrodes	10
Molecular Dynamics of Synthetic Flagelliform Silk Fiber Assembly	10
High Dielectric Breakdown Strength Nanoplatelet‐Based Multilayer Thin Films	10
Ionic Conjugated Microporous Polymers for Cycloaddition of Carbon Dioxide to Epoxides	9
Development of a Potential Multilayered Biofunctional Dressing for Localized Postoperative Cancer Treatment: A Hybrid Approach Using 3D Printing and Electrospinning	9
Photoresponsive Polymer‐Based Biomimetic Contractile Units as Building Block for Artificial Muscles	9
Issue Information: Macromol. Mater. Eng. 4/2026	9
Investigation of Release Kinetics of DOX from Polydopamine Nanocapsules Prepared by Hard Template Method	9
Viscoelastic Properties of Electrospray‐Deposited Polymer Shells via Quartz Crystal Microbalance With Dissipation (QCM‐D)	9
Formation of Supramolecular Gels from Host–Guest Interactions between PEGylated Chitosan andα‐Cyclodextrin	9
Radiation Grafting of Two PEG Derivatives onto PET: A Comparative Study for Biomedical Applications	9
	9
Adhesive Properties of Eco‐Friendly Hot Melt Adhesive Based on Poly(butylene adipate‐co‐terephthalate) and Rosin Maleic Resin	9
Effect of Martensitic Transformation of NiTi Particles on Temperature Sensitivity of Flexible VGCF/PDMS Films	9
Biobased Hyperbranched Polyesters as Effective Non‐Leachable UV Blockers for Sunscreens	9
Analysis of Crystallization Kinetics of PLA Filament for Fused Filament Fabrication	9
	9
Melt Electrowriting of a Photo‐Crosslinkable Poly(ε‐caprolactone)‐Based Material into Tubular Constructs with Predefined Architecture and Tunable Mechanical Properties	9
Green Synthesis of Poly( ε ‐caprolactone) Using Environmentally Benign Organic Acid Catalysts: A Sustainable, Metal‐Free, and Solvent‐Free Route to Ring‐	9
In Situ Growth of Cyclodextrin‐Based Metal Organic Framework Air Filters for Reusable SO₂ Adsorbent Applications	9
Large‐Scale Fabrication of Flexible EVA/EG@PW Phase Change Composites with High Thermal Conductivity for Thermal Management	9
Speckle Pattern Analysis of PVK:rGO Composite Based Memristor Device	9
Issue Information: Macromol. Mater. Eng. 11/2025	9
CO₂‐Responsive Copolymers for Membrane Applications, Synthesis, and Performance Evaluation	9
Additive Manufacturing‐Enabled Architected Nanocomposite Lattices Coated with Plasmonic Nanoparticles for Water Pollutants Detection	9
High Power Sunlight‐Simulated UV‐Induced Radical Polymerization: Self‐Initiation and Self‐Crosslinking	9
Thiol‐X Chemistry: A Skeleton Key Unlocking Advanced Polymers in Additive Manufacturing	9
Metal Ionic Liquids (MILs) as Promising Catalytic Curing Agents of Epoxy Prepolymer for the Design of High‐Performance Networks	9
Properties of Electrospun Aligned Poly(lactic acid)/Collagen Fibers with Nanoporous Surface for Peripheral Nerve Tissue Engineering	9
Lightweight and High Impact Polypropylene Foam Fabricated via Ultra‐Low Gas Pressure Injection Molding	9
Glucose‐Responsive Modified Poly(Propylene Imine) Dendrimer for Self‐Regulated Insulin Delivery	9
Porous Poly(3,4‐ethylenedioxythiophene)‐Based Electrodes for Detecting Stress Biomarkers in Artificial Urine and Sweat	8