Structural Concrete

Article	Citations
Issue Information: Structural Concrete 2/2022	87
Issue Information: Structural Concrete 1/2022	87
Mechanical performance of UHPC waffle plate under local loading: An experimental study	70
Issue Information: Structural Concrete 1/2023	57
Numerical study on failure pattern of ultra‐high performance cement based composite under oblique penetration	53
Cover Picture: Structural Concrete 10/2024	51
Experimental study on a novel reduced beam section self consolidating concrete‐filled double steel tube	49
Copper wire electric explosive crushing of large‐size reinforced concrete columns	47
Effect of reinforcement corrosion and axial load levels on seismic response of non‐ductile reinforced concrete columns	43
Flexural mechanism and design method for precast concrete splice slabs with welded junction plates	43
Carbon reinforced concrete exposed to high temperatures	42
Issue Information: Structural Concrete 1/2025	41
Rocket blast resistance of the fully demountable high performance FRC tongue and groove blocks	40
Issue Information: Structural Concrete 2/2024	40
Cyclic bending behavior of pre‐cracked thin‐walled elements in high performance fiber reinforced concrete	36
Advanced statistical optimization and performance evaluation of self‐compacting geopolymer concrete utilizing industrial by‐products	35
Shear design and life cycle assessment of novel limestone calcined clay cement reinforced concrete beams	34
Neural network‐based models versus empirical models for the prediction of axial load‐carrying capacities of FRP‐reinforced circular concrete columns	34
Study on the activity, phase, thermal decomposition characteristics, microstructure, and chemical element of hardened cement powder under heating temperature of 100°C~1200°C	34
Anchorage and detailing of reinforcement under fire action	33
Effect of strength grade on mechanical properties of concrete under dynamic load	33
Study on the gap width between the steel plate and concrete panels on behavior of the buckling‐restrained steel plate shear walls	32
Comparison between the behaviors of fully encased cold‐formed steel joists and hot‐formed steel joists with prestressed concrete: Experimental analysis	29
Mechanical modeling of dowel action and the influence of small amounts of shear reinforcement on the shear‐transfer actions in RC beams	29
Influence of physico‐mechanical and electrical resistivity performance of high volume fly‐ash cementitious mortar with low carbon	29

A model for predicting flexural capacity of PVC‐CFRP tube confined reinforced concrete beams	29
Load‐bearing capacity of Gerber saddles in existing bridge girders by different levels of numerical analysis	28
Experimental and analytical investigations on bond–slip behavior of steel reinforcement in UHPFRC considering yielding	28
Structural reliability of ultra‐high‐performance fiber reinforced concrete beams in shear	28
Shear performance of reinforced concrete beams strengthened in shear using NSM bars and reinforced HSC layers	27
The numerical simulation of standard concrete tests and steel reinforcement using force flux peridynamics	27
Design‐oriented elasto‐plastic analysis of reinforced concrete structures with in‐plane forces applying convex optimization	27
Development of theoretical model for predicting flexural behavior of GFRP reinforced concrete beams with CFRP grid‐reinforced ECC	26
Evaluation of the interfacial bond of corroded steel bar and modeling based on feed‐forward neural network	26
Development of abacus for determining the rheological behavior of self‐compacting concrete	26
Mechanical, microstructural, and thermal characterization of geopolymer composites with nano‐alumina particles and micro steel fibers	26
The influence of fiber on salt frost resistance of hydraulic face slab concrete	26
Strain distribution prediction in UHPC beams using deep learning model	25
DFOS measurements for strain analysis of anchorage zone in 57‐year‐old posttensioned precast girder using static and high‐frequency approach	25
Monitoring of historical structural materials with computed tomography	25
Determination of compressive strength of lightweight aggregate concrete in service using gene expression programming based on semi‐direct ultrasonic pulse velocity testing	25
New analytical models to predict the mechanical performance of steel fiber‐reinforced alkali‐activated concrete	25
Machine learning assisted prediction of the mechanical properties of carbon nanotube‐incorporated concrete	24
Mode shape area difference method for sparse damage detection in beam‐like structures	23
Transfer length of corroded wires in prestressed concrete members	23
An improved Lubliner strength model based on Ottosen failure criterion for concrete under multiaxial stress state	23
Conformity control of concrete durability parameters and its filtering effect on the design service life	22
Experimental study on seismic behavior of T‐shaped steel fiber reinforced concrete columns	22
Prediction of compressive strength of geopolymer concrete using machine learning techniques	22
Structural and load parameter estimation of a real‐world reinforced concrete slab bridge using measurements and Bayesian statistics	22
A review on retrofitting concrete members with near‐surface mounted‐fiber reinforced polymer composites	22
Shear bearing capacity prediction of STRC shear walls using data‐augmented fusion model	21
Compressive strength and impact resistance of hybrid fiber reinforced concrete exposed to elevated temperatures	21
Effects of bacterial consortium enhanced recycled coarse aggregates on self‐healing concrete immobilized with Bacillus megaterium MTCC 1684 and Bacillus subtilis NCIM 2193	21
Experimental investigation on flexural and ductile behaviors of rebar‐reinforced ultra‐high‐performance concrete beams	21
Enhancing printability of 3D printed concrete by using metakaolin and silica fume	20
Seismic performance of RC exterior wide beam–column joints	20
Cover Picture: Structural Concrete 2/2025	20
Chipperfield extension of the Kunsthaus Zurich	20
Data‐driven reliability and cost‐based design optimization of steel fiber reinforced concrete suspended slabs	20
Adapting piezoelectric ring actuator for early hydration monitoring in cementitious materials	20
Extension of the fib MC 2010 for basic and drying shrinkage of alkali‐activated slag concretes	19
Experimental investigation of pre‐damaged circular RC columns strengthened with fabric‐reinforced cementitious matrix (FRCM)	19
A model for predicting the splitting bearing capacity of Fiber Reinforced Concrete elements under partially loaded areas	19
Graphical modeling of discontinuous stress field for RC deep beams under uniform load	19
Experimental study and mechanism analysis on basic mechanical properties of basalt fiber reinforced concrete	19
Numerical evaluation of seismically retrofitted bridge concrete column under extreme loading	18
Investigation the behavior of LWAC encased steel columns after exposure to elevated temperature	18
Torsional behavior of hybrid fiber reinforced shear walls an experimental point of view	18
Testing of precast recycled aggregate concrete shear wall with pressed sleeve connection subjected to cyclic loading	18
A comprehensive review of radiation shielding concrete: Properties, design, evaluation, and applications	18
Life cycle assessment of next generation non‐metallic bridges	18
Vision‐based monitoring system for in‐plan seismic tests conducted on a shaking table: The case study of prefabricated concrete shells	18
Treatment of modelling uncertainty of NLFEA in fib Model Code 2020	18
Properties of cement‐based materials containing calcium stearate and supplementary cementitious materials	17

Using calcium‐rich precursors to improve the early‐compressive strength of alkali‐activated slag cement at low temperature	17
Data informed performance assessment and structural health monitoring for existing and historical concrete structures	17
Enhancing shear capacity of thin slabs with CFRP shear reinforcement: Experimental study	17
Mechanical performance of crumbed rubber concrete subjected to high temperature	17
Predictive modeling of compressive strength in silica fume‐modified self‐compacted concrete: A soft computing approach	17
Eccentric loading behavior of steel tube columns filled with steel‐fiber‐reinforced recycled concrete	17
Cyclic performance of non‐ductile reinforced concrete columns retrofitted by partial steel plate jacketing: Experiment and numerical analysis	17
Sectional analysis of the cyclic behavior of steel fiber reinforced concrete	17
Estimation of strengths of hybrid FR‐SCC by using deep‐learning and support vector regression models	16
Experimental study of aggregate size and gradation on pervious concretes' mechanic, hydraulic, and surface properties	16
Mechanical and micro‐characterization of alkali‐activated concrete under high‐temperature exposure	16
Development of cost‐effective geopolymer mortars from low‐grade metakaolin and bottom ash for 3D construction printing	16
Cover Picture: Structural Concrete 6/2022	16
Study on flexural mechanical properties and size effect of recycled coarse aggregate concrete beams based on 3D mesoscopic simulation	16
Reliability design for bearing capacity of steel plate strengthened RC beams based on the improved design value method	16
Experimental and analytical study of the flexural behavior of basalt fiber‐reinforced concrete beams	16
Experimental studies on flexural behavior of full iron tailings concrete beams	16
Study on the seismic performance of precast shear walls connected by novel non‐porous grouted sleeve connectors	16
Carbon abatement strategies for bridges in India	16
fib‐news	15
Detection of corrosion effects on prestressed concrete bridge deck slabs from the champlain bridge through non‐destructive testing techniques	15
Strength optimization of recycled fine aggregate self‐curing concrete using Taguchi design	15
Evolution of fib model codes: Mastering challenges and encountering new ones	15
Multifunctional computational models to predict the long‐term compressive strength of concrete incorporated with waste steel slag	15
Issue Information: Structural Concrete 3/2021	15
Design of alkali‐activated reactive powder concrete incorporating reactive MgO	15
First application of the balanced lowering method to build two bridges in Austria	15
Yihe Bridge on Beijing Road: The world's longest synchronous jacking constructed bridge	15
Multiscale analysis on the mechanical behavior and failure mechanism of high strength concrete	15
A unified approach for determining the strength of Frc members subjected to torsion—Part I: Experimental investigation	15
Influence of the preparation of the cylindrical specimen surface and approach analysis on the test value of compressive strength	15
Shear and interface shear of semi‐precast slabs with lattice girders under monotonic loading	15
Seismic behavior of RC columns under high active confinement force	15
Fragility analysis of a triangular free‐form reinforced concrete shell	14
Cover Picture: Structural Concrete 2/2024	14
István Medgyaszay's unique style in concrete, with a special focus on the Veszprém Theater	14
Applied element method‐based blast‐resistant design of façade columns with limited standoff distance	14
Research on size effect of Z‐shaped shear interface at the interface between new–old concrete	14
Pseudo‐cracking approach in reinforced concrete beam with horizontal crack	14
Direct shear test on the interface between tunnel linings	14
Value of information‐driven innovation in Gerber saddles monitoring	14
A highway bridge—A database for digital methods	14
Automated machine learning techniques for estimating of elastic modulus of recycled aggregate concrete	14
A modeling strategy for the shear and flexural performance prediction of SFRC beams without stirrups accounting for the variability of properties	14
Analysis of the influence on structural seismic performance by the composite reinforcement method	14
Concrete containing recycled concrete coarse aggregate and crushed glass sand: Mitigating the effect of alkali–silica reaction	14
Cover Picture: Structural Concrete 8/2024	14
Study on seismic performance of reinforced concrete shear wall with diagonally distributed reinforcement	13
Strut‐and‐tie model for column‐to‐drilled shaft connections in reinforced concrete bridge columns subjected to lateral loads	13
Evaluation of the acid degradation properties of colloidal nanosilica‐based cement pastes	13
Application of fiber optic measurement in textile‐reinforced concrete testing	13
Torsional behavior ofI‐steel–concretecomposite beam considering the composite effects	13
Challenges in structural design and execution: Stuttgart's new central station	13
Numerical simulation of post‐tensioned concrete girders with defective grouting including local stress–strain tendons response	13
Anchorage and lap capacity of plain surface and square twisted bars in existing R.C. Structures: A comprehensive approach	13
Study on the distribution characteristics of damage and multidimensional parameter influence of abrasive water jet impact on reinforced concrete	13
Influence of parameter uncertainty on the low‐carbon design optimization of reinforced concrete continuous beams	13
Experimental investigations of precast concrete column with spliced connections based on ultrahigh‐performance fiber‐reinforced concrete	13
Effect of ECC layer thickness and reinforcement ratio on the load carrying capacity of steel‐reinforced composite beams	13
Effect of using normal concrete or recycled concrete layer on behavior of repaired projectile bullet damaged reinforced concrete beams	13
Effect of water‐reducing admixtures water content on rheology, workability, and mechanical properties of fly ash‐based geopolymer and slag‐based alkali‐activated mixtures	13
Bridging the gap between mathematical optimization and structural engineering: Design, experiments and numerical simulation of optimized concrete girders	13
Post‐fire behavior of steel slag fine aggregate concrete	13
Inelastic analysis of octagonal concrete‐filled steel tubular short columns under eccentric loading	13
fib‐news	13
Analysis and evaluation of direct shear tests on concrete joints in hydraulic structures	12
Improved simplified constitutive tensile model for fiber‐reinforced concrete	12
Experimental investigation on the seismic performance of prefabricated fiber‐reinforced concrete beam‐column joints using grouted sleeve connections	12
Experimental investigation on reinforced concrete beams subjected to axial compressive and shear forces	12
Sustainable transformation of sewage sludge ash and waste industrial additive into green cement blend	12
Spatial characteristics of stray current corrosion of reinforcing bars in pseudo concrete	12
Study on the flexural properties and fiber‐selection method of fiber‐reinforced geopolymer concrete	12
Analysis of the flexural response of hybrid reinforced concrete beams with localized reinforcement corrosion	12
Time‐dependent elongation and cracking behavior of fiber reinforced concrete tension chords	12
Static mechanical properties of reactive powder concrete reinforced with basalt fibers	12
Assessment of mechanical properties of fiber reinforced cementitious system exposed to high temperature	12
Theoretical and experimental investigation of the time‐dependent relaxation rates of GFRP and BFRP reinforcement bars	12
Long‐term shear strength of RC beams based on a mechanical model that considers reinforcing steel corrosion	12
A review on the effects of cracking and crack width on corrosion of reinforcement in concrete	12
Effects of environmental temperature on the mechanical properties of polyethylene fiber‐engineered cementitious composites	12

Performance evaluation of fly ash and ground granulated blast furnace slag‐based geopolymer concrete: A comparative study	12
Dynamic failure behaviors of reinforced‐concrete based on the split‐Hopkinson pressure bar tests	12
Effect of reinforcing and crack width on the vibration damping capacity of rubberized concrete beams	12
Performance of meta concrete panels subjected to explosive load: Numerical investigations	11
Effect of superabsorbent polymers on mechanical strength and cracking of mortar and concrete with water to cement ratios of 0.4 and 0.5	11
Modeling and probabilistic evaluation of repair strategies in the initiation phase of chloride‐induced corrosion of the reinforcement of concrete structures	11
Dynamical analysis of a 40 m span precast posttensioned concrete girder during lifting operations	11
Microscopic mechanism analysis and failure criterion study of glass fiber recycled concrete under three‐dimensional compressive stress state	11
Experimental and numerical investigations on interaction between reinforced‐concrete grid frame and ceramsite foam concrete infill	11
Cellular concrete: A viable low‐carbon alternative for developing countries in seismic regions?	11
Traditional and modern methods of construction: Comparative study of the sustainability of single‐family homes	11
Mechanical properties of CFRP and shrinkage compensating concrete actively confined and strengthened short columns under freeze–thaw cycles	11
Residual strength of concrete subjected to fatigue based on machine learning technique	11
A combination of deep learning and genetic algorithm for predicting the compressive strength of high‐performance concrete	11
Analysis and prediction of the effect of Nanosilica on the compressive strength of concrete with different mix proportions and specimen sizes using various numerical approaches	11
Transformer‐based crack segmentation for concrete structures in complex scenarios	11
Numerical simulation and simplified analytical model for the longitudinal joint bending stiffness of a tunnel considering axial force	11
Predictive modeling of compressive strength of geopolymer concrete before and after high temperature applying machine learning algorithms	11
On the dependence of concrete edge breakout on concrete age and coarse aggregate type	11
Experimental investigations on mechanical performance, synergy assessment, and microstructure of pozzolanic and non‐pozzolanic hybrid steel fiber reinforced concrete	11
Studying the effectiveness of sewage sludge ash and its combination with natural pozzolans in controlling alkali–silica reaction	11
Investigating the flexural behavior of ASR‐damaged RC beam through internal stress and cracking development using 3D Rigid Body Spring Model	10
New insight into the prediction of strength properties of cementitious mortar containing nano‐ and micro‐silica based on porosity using hybrid artificial intelligence techniques	10
Study on steel fiber synergistically reinforced cellular concrete explosion‐proof effect in an underwater near‐field environment	10
Mechanical properties and damping ratio of gradient polymer concrete for damping beam structure	10
Corroded Tension Chord Model: Load‐deformation behavior of structures with locally corroded reinforcement	10
Compression behavior of reactive powder concrete confined with high‐strength spiral stirrups	10
Retraction: Yuan J, Zhao M, Esmaeili‐Falak M. A comparative study on predicting the rapid chloride permeability of self‐compacting concrete using meta‐heuristic algorithm and artificial int	10
SPECIAL THEME: Capacity Assessment of Corroded Reinforced Concrete Structures	10
Numerical modeling techniques and investigation into the flexural behavior of two‐way posttensioned concrete slabs with profiled steel sheeting	10
Cyclic loading test for prefabricated ultra‐high performance concrete columns with bellows grouting connection	10
A spatial–functional analysis methodology of ultra‐thin free‐form shells	10
Application of optimization‐based regression analysis for evaluation of frost durability of recycled aggregate concrete	10
Experimental investigation on the effect of natural fire exposure on the post‐fire behavior of reinforced concrete beams using electric radiant panel	10
Experimental study on the impact of traffic‐induced vibrations on early‐age concrete	10
Evaluation of compressive strength using novel in situ test method	10
Tensile strength and flexural behavior of steel fiber‐reinforced concrete beams	10
Impact of slag‐fly ash cementitious system on thermal controls and durability of high‐strength mass concrete	10
Assessment of slip load in bolted connections	10
Sustainable concrete solutions: Evaluating the structural performance of coconut shells as coarse aggregate substitute	10
Nakatsugawa Bridge	10
On the effectiveness of shear reinforcement type in GFRP‐reinforced concrete beams: Experimental study	10
Biaxial bending of RC rectangular column sections: Improved ‘load contour’ formulation	10
fib‐news	10
Plastic settlement and hardened state assessments of manufactured sand made concrete for varying microfine levels	10
A new fib Model Code proposal for a beam‐end type bond test	10
A 576 m long creep and shrinkage specimen – Long‐term deformation of a semi‐integral concrete bridge with a massive solid cross‐section	10
Experimental investigation of cracking localization in RC beams with steel fibers	10
Experimental investigation of corrosion effect on bending deflection of shield tunnel segment containing transverse cracks	10
Long‐term behavior of slender long‐span precast prestressed high‐strength concrete girders	10
	10
Cover Picture: Structural Concrete 2/2023	10
Issue Information: Structural Concrete 4/2022	10
Improving shear deficiency of prestressed concrete sleepers by crack resisting stirrups	10
Shear failures in pile caps: Governing mechanisms and influence of size on the resistance	10
Cover Picture: Structural Concrete 1/2024	10
Shear performance of the interfaces for precast concrete shear wall components by novel preparation method	9
Development of an artificial neural network model to predict waste marble powder demand in eco‐efficient self‐compacting concrete	9
Comparative shear performance of ultra high‐performance concrete filled pocket and longitudinal trough connector of PC composite girder with full‐depth deck	9
Thin‐walled concrete beams with stay‐in‐place flexible formworks and integrated textile shear reinforcement	9
Tram stop Výstaviště in Prague Holešovice	9
Multi‐objective optimization of green concrete incorporating recycled plastic and sawdust waste as fine aggregates using response surface methodology	9
Early use of the reinforced concrete in the architecture of the Historicism in Austria–Hungary	9
Characterization of performable geopolymer mortars for use as repair material	9
Mechanical performance, microstructure, and damage model of concrete containing steel slag aggregate	9
Nonlinear analysis of square steel‐reinforced concrete‐filled steel tubular short columns considering local buckling	9
Effect of modified clay treated crumb rubber and silica fume on the properties of concrete	9
Fracture behavior of basalt fiber‐reinforced concrete subjected to high temperatures	9
Performance evaluation method of precast parking structure vertical members under vehicle impact	9
Experimental cyclic behavior of concrete interfaces with postinstalled reinforcing bars or alternative connectors	9
Axial compressive behavior of fire‐damaged RC column strengthened with ECC‐CFRP grid	9
Performance‐based concept for the selection of sustainable concretes exposed to chlorides	9
Mechanical properties and constitutive model of coral aggregate concrete subjected to dynamic uniaxial and triaxial compression	9
Developing robust structure: Multi‐expression programming for anticipating mechanical properties of shape memory alloy‐confined concrete cylinders	9
Distributed AutoML framework for multi‐objective optimization of concrete crack segmentation models	9
Reinforced concrete beam‐columns anchored with headed bars subjected to reversed cyclic loading: Experimental and numerical investigation	9
3D printed concrete as stay‐in‐place formwork: Mechanics during casting and curing	9
Experimental studies on precast concrete beam‐column connections with precast irregularly shaped columns and composite beams subjected to cyclic loading	9
Experimental investigation of fatigue dissipated energy of self‐compacting rubber concrete with acoustic emission technology	9
Developing a support vector regression model via optimization algorithms to appraise the hardness properties of high‐performance concrete	9
Prototype test of the mechanical behavior and failure mechanism of segment structure with distributed mortises and tenons	9
Efficiency of prestressed concrete joist reinforced by CFRP: Experimentation and analytical verification	9
Enhancing concrete sustainability with spent diatomaceous earth from the wine industry: Long‐term experimental and statistical analysis	9
Rehabilitation of post‐heated rectangular reinforced concrete columns using different strengthening configuration	9
Safety assessment of existing prestressed reinforced concrete bridge decks through different approaches	9
Effects of cold joints on concrete mechanical properties and tunnel service performance	9
Research on the visual quality evaluation indicators of water washed stone surface	8
Experimental study on the axial compressive performance of prefabricated steel reinforcement cage‐cast‐in‐situ concrete column with an innovative sleeve	8
Seismic performance of reinforced concrete stairs with new sliding support	8
Considering the existing stirrup location: The axial compressive behavior of partially carbon fiber‐reinforced‐wrapped square columns	8
Development of a novel type of steel‐shell concrete composite tower	8
Numerical study on the flexural and shear behavior of steel fiber and high‐strength steel combination in ultra‐high‐performance fiber‐reinforced concrete beams under cyclic loading	8
Dynamic bond behavior of fiber reinforced plastic anchor post‐installed low‐strength concrete under different strain rates	8
Experimental investigation on mechanical property and hydration process of sintered sludge cement paste at different water‐binder ratios and curing ages	8
Numerical analysis of reinforced concrete beams enhanced in shear with external polymer cement mortar‐bonded FRP grid	8