Proceedings of the Institution of Mechanical Engineers Part L-Journal

Article	Citations
Bending stresses in straight bars with a transverse centre hole: A case of beneficial notch effect?	32
Natural rubber components fatigue life estimation through an extreme learning machine	31
Oxidation performance of particle-reinforced Ti750 matrix composites	25
Characterization and erosion wear behavior of Ni-13%WC8Co microwave clad on AISI-316 steel	25
Collapse analysis of Al 6061 alloy conical shells with circular cutouts under axial loading: experiment and simulation	17
Effects of hole perpendicularity error on fatigue behaviors of CFRP single-lap single-bolt joints	16
Effect of Zr on static recrystallization of deformed austenite and strain-induced precipitation in Ti microalloyed steel	16
Effect of strain path change on static recrystallization behavior of AT63 magnesium alloy	15
Inclusive anisotropy and texture analyses of AZ91 Mg sheets subjected to various passes of elevated-temperature constrained groove pressing	13
Textile-reinforced mortars; an experimental comparative study of tensile strength improvement methods	13
Role of pre-strain on the corrosion behaviour of Al-Zn-Mg P/M alloy	13
Quench sensitivity of A379 alloy under high-pressure die-casting and gravity-casting processes	13
Investigation of the performance of the structure and energy absorption in sandwich panels of PLA/TPU manufactured by the FFF technique	12
Biomimetic design and fabrication of thermally induced radial gradient shape memory scaffolds using fused deposition modeling (FDM) for bone tissue engineering	12
Impact behaviors of composite plates filled with chitosan/carbon nanotubes	11
Relation between durability and mechanical properties on glass fiber reinforced slag-based geopolymer	11
A robust methodology for surface roughness characterisation of additive manufactured parts	11
Experimental and numerical investigation on the resistance of steel fiber-reinforced heavyweight concrete slabs against rigid projectile impact	11
Mechanical properties of aluminum bonded joints reinforced with functionalized boron nitride and boron carbide nanoparticles	10
An experimental investigation on the thermal and mechanical characterization of boron/flax/PLA sustainable composite	10
Investigations on wetting and structural behavior using CaF2-SiO2-CaO-22.5%TiO2 SMAW electrode coating for AUSC applications	10
Effect of Zr on microstructure evolution of Ti-Mo composite microalloyed steel during rolling	9
Experimental investigation on the perforation behaviour of sandwich panels with hybrid composite face sheets and cellular aluminium core using quasi-static and instrumented inverse impact methods	9
In-silico user study case: wearable feedback haptic device for rehabilitation	9
Manufacturing and behavioral analysis of functionally graded material fabricated via wire arc additive manufacturing	9

Wire-arc-additively manufactured Bi metallic structure: Mechanical properties and microstructural characterization	9
Performance prediction and parameter optimization of alumina-titanium carbide ceramic micro-EDM hole machining process based on XGBoost	9
Special issue: 5th international conference on materials design and applications 2024 (MDA 2024)	9
Natural fibre composites – an alternative to plastics in the automotive industry: A review	9
Creep characteristics and cavitation mechanisms of AA2017	8
Fabrication and control architecture of novel hybrid metal additive manufacturing incremental forming technology	8
Experimental investigation into quasi-static transverse loading of natural fibre reinforced composites with bio-inspired stacking configuration	8
Design and development of aluminum alloy 6061-T6 pressure vessel liner for aerospace applications: A technical brief	8
Experimental studies of fracture and fatigue crack growth in dissimilar metal welded joints of nickel-based superalloys: Cracks oriented along the weld	8
The study on the wood candidates for the impact limiter of a spent fuel cask	8
Crashworthiness performance of double-hat column made of anisotropic sheet metals under axial impact load	8
The synergistic effect of hybridizing and aligning graphene oxide nanoplatelets and multi-walled carbon nanotubes on mode-I fracture behavior of nanocomposite adhesive joints	7
Effect of mating material on wear behaviour of Ni-based hardface coating	7
A new deformable self-clinching fastener	7
Experimental and numerical investigations of springback and residual stresses in bending of a three-ply clad sheet	7
Effect of various weld length ratios on the curvature and distortion of a double-side edge welded fin plate: A study using SYSWELD	7
Brake squeal finite element performance comparison between commercial and coconut shell-reinforced material drum brake linings	7
Effect of cryo-rolling on mechanical properties and microstructure of pure copper	7
Tracking microstructural evolution and hardening in Al–Zn–Mg–Cu alloys aged artificially via electrical conductivity measurements	7
Evaluating the thermal conductivity coefficient of polypropylene/graphene nanocomposites: A hierarchical investigation	7
Modal analysis of a lattice type metamaterial by modeling cell structures using Euler–Bernoulli beams	7
Arc-welded armour steel: A tailored and comparative study of its microstructure and mechanical properties	7
Response of carbon/PEEK automotive driveshafts with/without an inner isotropic layer at high temperature considering temperature-dependent material properties	7
Progressive failure analysis of U-notched thin composite plates repaired with a double-sided composite patch	7
Effects of seawater immersion on a glass fibre reinforced bioepoxy mechanical properties and its application in the ship hull finite-element analysis	7
Influence of stacking sequence and compaction force during the AFP process on mechanical performance and damage mechanisms elucidated by acoustic emission insights	7
Effect of tool–pin offset on microstructure, mechanical properties, and corrosion behavior of friction stir welded AA2024-T3 and SS304 dissimilar joints	7
A comprehensive review of Gum metal's potential as a biomedical material	6
Synergistic strengthening by in-situ eutectic microstructure and carbide precipitates on tribological performance and oxidation resistance in laser-deposited SiC-IN718 composites	6
Modelling and numerical analysis for rotatory friction welding of U75V steel rails	6
Synthesis, characterization, and mechanical properties of Al–Zn–Mg alloy-based hybrid metal matrix composites reinforced with Si3N4/TiB2 particles processed through st	6
Forming mechanism of single-channel multilayer laser cladding Fe60 process under different laser heat source operating mode	6
Influence of the fruit waste fillers on the thermal, mechanical, and morphological properties of flax/epoxy composites	6
Multiscale analysis of the properties and failure mechanism of red mud-based geopolymers	6
On search of optimal FDM parameter settings for reduced dimensional error using entropy-PCA-TOPSIS and regression machine learning techniques	6
Tribological performance and 3-D surface characterisation of age-hardened Al2090-based ceramic composites	6
Deep drawability of electron beam welded tailored blanks of commercially pure titanium thin sheets	6
Residual stresses study in butt welded joint of Inconel 617 alloy and effect of post weld heat treatment on residual stresses	6
Microstructure and tensile-shear behavior of dissimilar resistance spot welds between 2304 duplex stainless steel and Inconel 718 superalloy	6
A study on hot deformation behavior of 40Cr/Q345B bimetal	6
Experimental and numerical study of the longitudinal and transverse residual stresses distribution in the constrained groove pressing process of pure copper sheets	6
A trust region algorithm for finite-strain plasticity with strongly coupled hardening	6
Special Issue: Composite Materials	6
Analyzing microstructural, residual stress, and mechanical characteristics in dissimilar welds of Inconel 59 and AISI 904L through double-pulsed gas metal arc welding	6
The effects of material type and temperature factors on the adhesive bonding strength of 3D printed multi-material plastic structures	6
Effect of single-pass large-strain tube pack-rolling on forming AZ61 alloy strip	6
Special Issue: Joining by plastic deformation	6
Influence of cyclic aging on adhesive mode mixity in dissimilar composite/metal double cantilever beam joints	6
Analytical investigation of residual stress in samples with variable cross-sectional surfaces in the laser powder bed fusion process	5
Investigation on micro-textured tappets from design and production to the application properties	5

A vibration analysis and control method of a heavy buoyancy regulator in an underwater vehicle	5
Geometric modelling and finite element analysis of plain-woven natural fibre reinforced hybrid textile composites	5
Mode-I and II fracture behavior of metal-to-composite bonded interfaces with a graphene nanoplatelet-reinforced structural epoxy adhesive	5
Impact of printing parameters on the dynamic outputs of a slider-crank mechanism with FFF-based 3D-printed crank-arms	5
Effect of multi-pass overlapping friction stir processing on fatigue behavior of Al-Cu alloy	5
Influence of nano-TiO2 particles on the microstructure, mechanical and wear behaviour of AA7178 alloy matrix fabricated by stir casting technique	5
Influence of multiple friction stir welding passes on the microstructure and mechanical properties of AA2024 age-hardened aluminum alloy	5
Investigations on microstructural, mechanical, and tribological properties of Al-Cu-Ni alloy in cast, heat-treated, and strain-softened conditions	5
Impact resistance and energy absorption ability of bio-mimetic thin-walled structures with hollow columns under impact loading	5
Fabrication of stainless steel 308L wall through wire + arc additive manufacturing: Microstructure and numerical prediction of tensile test	5
An inverse method for elastic constants identification of two-layer hyperelastic bodies with suction loading	5
Improving the quality of the ultrasonic welded thermoset-based composites using laser surface treatment	5
Investigation on the ballistic performance of rubber-aluminum (AA7075-T651) laminated plates reinforced with borosilicate glass balls	5
Effect of in-situ cooling during pressure and frictional deformation on mechanical and metallurgical properties of Ni-based functionally graded material developed by wire arc additive manufacturing	5
Vibration analysis of metallic structure of an innovative dam gate	5
Improving the mechanical performance and impact damage tolerance of glass composite laminates via multi-scales of hybridisation	5
Microwave-assisted fabrication of high-strength natural fiber hybrid composites for sustainable applications: An experimental and computational study	5
Influence of workpiece geometry and natural frequencies on ultrasonic metal welding	5
Enhancement of structural integrity of stitched sandwich panels: Investigation by flexural, low velocity impact, compression after impact, and machine learning methods	5
Energy absorption of foam-filled corrugated core sandwich panels under quasi-static loading	5
Ultrasonic-assisted-infiltration of Al5083/SiC 30PPI- C4 composites and its characterization	5
Joining sheets made from dissimilar materials by hole hemming	5
Numerical study on the influence of process parameters in direct ink writing of high viscosity bio-inks	5
Dissimilar joining of Titanium alloy to Aluminium using Al-Si based filler alloy by vacuum brazing technique	5
Experimental and numerical investigation of impact behavior in honeycomb sandwich composites	4
Multi-layer model for moving contact problems of functionally graded coatings with general variations in physical properties	4
Estimating ductile crack initiation in structural steel under combined tension and shear stress using a modified void growth model	4
Dynamic response analysis of functionally graded gears	4
Analysis of unbalanced laminate composites with imperfect interphase: Effective properties via asymptotic homogenization method	4
A microscale constitutive model for thin stainless steel sheets considering size effect	4
Thick-wire GMAW for fusion welding of high-strength steels	4
Influence of rice husk ash and hybrid fiber on engineering properties of densified high-performance fiber-reinforced concrete	4
Three-dimensional printed silk fibroin and fenugreek based bio-composites scaffolds	4
Analyzing sandwich panel with new proposed core for bending and compression resistance	4
Numerical investigation on meshing temperature of multicomponent nylon gears by incorporating viscoelasticity	4
An analytical analysis of vibrational energy harvesting using piezoelectric energy harvester in a fixed wing unmanned aerial vehicle	4
Third-generation biodegradable bone implants: A novel Mg-1Zn-0.5Sc alloy treated by laser shock peening to improve its characteristics	4
The effect of the cyclic hornification on the hygromechanical and surface characteristics of rice stubble agriculture waste	4
In-plane and out-of-plane compressive properties of regular and graded cellular cores of sandwich panels fabricated by additive manufacturing	4
Creep damage and fracture of turbine blade roots	4
Investigation of dynamic properties of a three-dimensional printed thermoplastic composite beam containing controllable core under non-uniform magnetic fields	4
Integrated computational modeling of large format additive manufacturing: Developing a digital twin for material extrusion with carbon fiber-reinforced acrylonitrile butadiene styrene	4
Investigations on the role of Inconel 82 additions on improving fatigue and corrosion behaviour of gas tungsten arc AISI 316L stainless steel claddings	4
Dynamic numerical prediction of plasticity and damage in a turbofan blade containment test	4
Microstructural evaluation and corrosion behaviour of Inconel 82 and Inconel 625 overlays on 304L stainless steel weld used in nuclear fuel reprocessing plant	4
A comparative study on the multidirectional piezo-resistive scenario of conventional and auxetic silicone-based sensors coated with graphite powder	4
A review on β-Ti alloys for biomedical applications: The influence of alloy composition and thermomechanical processing on mechanical properties, phase composition, and microstructure	4
A comparative investigation on the surface characteristics of AISI 304 and AISI 1045 steel influenced by turning combined with ball burnishing	4
Shape memory alloy based NiTi reinforced functionally graded material for vibration damping	4
Mechanical and durability properties of alkali-activated slag/waste basalt powder mixtures	4
The influence of plasma nitriding hardness treatment on the dynamic compressive behavior of the Hardox 400 at a wide temperature range	4
Characterization of the microstructure and mechanical properties of activated tungsten inert gas welded and hot-wire tungsten inert gas welded super austenitic stainless steel AISI 904L	4
Numerical and experimental analysis of shear strength on SLM 3D-printed stainless-steel bonded joints enhanced by bio-inspired surface pattern	4
Tensile anisotropy of powder bed fusion steel 316L: A practical study on the effect of build orientation	4
Exploring the mechanical, metallurgical, and fracture characteristics of hybrid-reinforced magnesium metal matrix composite synthesized via friction stir processing route	4
The influence of vibration amplitude on AA7075-T6 corrosion resistance improvement during ultrasonic-assisted burnishing	4
Advances in simulation and experimental study on intermetallic formation and thermomechanical evolution of Al–Cu composite with Zn interlayer: Effect of spot pass and shoulder diameter during the pin	4
Joining of hybrid semi-finished products from sheet metal by orbital forming	4
Optimization of laser irradiation process parameters for 40Cr steel based on back propagation neural network and genetic algorithm	4
Adapting a phenomenological model for predicting acoustical behaviour of Camellia sinensis/Ananas comosus/E-glass fibre-blended epoxy hybrid composites	4
Design, properties, and applications of non-pneumatic tires: A review	4
Machine learning assisted nonlinear deflection analysis of agglomerated carbon nanotube core smart sandwich plate with three-phase magneto-electro-elastic skin	3
Effect of graphene nano-additives on the fatigue limit of fiber-reinforced polymer hybrid composites—A micromechanical modeling procedure	3
Production-related effects on the adhesive bondline performance of structural adhesives joining dissimilar materials	3
Investigating the formability of 6061-T6 aluminum alloy sheets at elevated temperatures using experimental and numerical methods	3
Effect of the static shoulder on microstructural, textural, and mechanical characteristics during friction stir welding of Al6061	3
Effect of Ag interlayer on the microstructural properties and nanocreep behavior of Ti6Al4V/AA7075 dissimilar laser weldments	3
Mechanical characterization of innovative recyclable monomaterial films and laminates for food packaging	3
Design and stiffness assessment of non-pneumatic bicycle tyres with latticed cores produced by fused filament fabrication	3
Exploring the impact of wire core diameter on microstructure and joint properties in ultrasonic wire harness welding	3
Application of spherical macro-indentation for determination of plastic anisotropy and residual stresses using indentation geometry and inverse analysis	3
Influence of pin thread on particle distribution in the FSP using the CEL method	3
Quantification of delamination resistance data of FRP composites and its limits	3
Creation and finite-element analysis of multi-lattice structure design in hip stem implant to reduce the stress-shielding effect	3
Effects of alkali-silane surface-grafted pineapple fibre on lamina delamination & drilling damage behaviour of aged epoxy composites under various water and temperature	3
Metamaterials: Design, modelling, simulation and implementation	3
On the applicability limits of double-sided self-pierce riveting	3
Vertical stiffness of functionally graded hexagonal honeycomb structures for non-pneumatic tyres produced by fused filament fabrication	3
μSmartScope – Towards a low-cost microscopic medical device for cervical cancer screening using additive manufacturing and optimization	3
On programming of polyvinylidene fluoride–limestone composite for four-dimensional printing applications in heritage structures	3

Crashworthiness analysis of cylindrical tubes with coupling effects under quasi-static axial loading: An experimental and numerical study	3
Metallurgical characterization and high-temperature tensile failure of Inconel 617 alloy welded by GTAW and SMAW—a comparative study	3
A novel phenomenological material model and calibration for high temperature material behaviour of AA5083	3
Integrated design for the forming process and structural performance of variable-thickness laminates	3
Investigation on pulsed electrolytically polished AlSi10Mg alloy processed via selective laser melting technique	3
A comprehensive study of LPBF parameter influence in 316L stainless steel mechanical properties, macrostructure, and printability	3
Prediction of wear of short glass fiber reinforced polyamide 66 composite sprocket	3
Multipoint forming process of aluminum sheet considering its forming limit diagram: Experimental and numerical investigations	3
Experimental and numerical analysis of high-velocity impact behavior in woven INNEGRA ® /Epoxy composite plates	3
The influence of holding time on the characteristics of friction stir welded dissimilar magnesium alloy joints during post welding heat treatment	3
An experimental investigation on feasibility of submerged ultrasonic spot welding of thermoplastics	3
Colour changing material for the estimation of flue gas radiation on the miniature gas turbine surface	3
Selected properties of X120Mn12 steel welded joints by means of the plasma-MAG hybrid method	3
Effects of rejuvenators and aging conditions on the properties of blended bitumen and the cracking behavior of hot asphalt mixtures with a high RAP content	3
Cross-section optimization of thin-walled open-section composite column for maximizing its ultimate strength	3
Polymer composites based on aromatic polyamide and fillers of spherical and layered structure for friction units of high-performance equipment	3
Sound absorption properties of natural Bari bamboo composite	3
Biopiezoelectromagnetic and mechanical effect	3
Corrigendum	3
Compression resistance of horsetail-inspired porous thin-walled structures	3
Enhancing tribo-mechanical and corrosion properties of A383 aluminum matrix composites through stir-cum-squeeze casting with marble dust and hexagonal boron nitride reinforcement	3
A comparative study on self-piercing riveting and pre-holed self-piercing riveting of high-strength steel and aluminum alloy	3
Buckling and post-buckling behavior of auxetic cellular structures	3
Electro-discharge machining using copper-coated additively-manufactured AlSi10Mg electrodes	3
Mechanical characterization of jute/carbon hybrid epoxy composites	3
An implicit finite element phase-field technique with temperature-dependent properties for liquid-solid interface evolution	3
Effect of friction stir welding tool hardness on wear behaviour in friction stir welding of AA-6060 T66	3
A rational design of a carbon black percolation network glass fibers for modeling an in situ self-reporting composite	3
Investigations on compression behavior of fused filament fabricated hybrid biomimetic structures	3
Electric performance of fastened hybrid busbars: An experimental and numerical study	3
Deterministic and stochastic natural frequency analysis of microwave-assisted compression-molded PLA/nano-HA composite beams and arches	2
Mechanical and thermal performance of additively manufactured copper, silver and copper–silver alloys	2
Analysis of fracture toughness and fatigue crack growth rates of electron beam-welded dissimilar nickel-based superalloys: Mode-I cracks oriented normal to the weld	2
Thermal conduction modeling of composites by embedding technique	2
Interfacial microstructure and mechanical properties of B4C/TC4 brazed joints based on Ag-Cu-Ti + W-AlN/Mo foil/Nb foil interlayer	2
A novel 3D printed personalised insole for improvement of flat foot arch compression and recoil – preliminary study	2
Developing methods of constrained groove pressing technique: A review	2
Synthesis, fabrication and tribo-mechanical studies of microcapsules filled and Al 2 O 3 /glass fibre reinforced UHMWPE based self	2
Multi-pass weld influence on metallurgical, tensile, impact toughness and fatigue crack growth behavior of gas tungsten arc welded Ti-6Al-4V joints	2
The role of agglomeration in the physical properties of CNTs/polymer nanocomposites: A literature review	2
Ballistic characterization of fiber elastomer metal laminate composites and effect of positioning of fiber reinforced elastomer	2
RETRACTION NOTICE: Application of adaptive neuro-fuzzy inference system for strength prediction of rubberized concrete containing silica fume and zeolite	2
Influence of applied stress on shape memory characteristics of Ni50Ti45Cu5 (at.%) alloy subjected to thermomechanical cycling	2
Topology optimization of adhesive material in a single lap joint using an evolutionary structural optimization method and a cohesive zone model as failure criterion	2
Influence of Acacia concinna and Vachellia nilotica seed nanopowder on the properties of short Turkish hemp–reinforced epoxy composites	2
Application of copper-silicon carbide composite tools fabricated through an innovative microwave sintering process for electro-discharge machining	2
Unravelling the microstructure – indentation creep resistance relationships for friction stir welded modified 9Cr-1Mo steel and LN-type 316 stainless-steel dissimilar joints	2
Experimental and Optimization Study of Compression Behavior of Sandwich Panels with New Symmetric Lattice Cores	2
Microstructural and interface properties of aluminium alloy coatings on alumina applied by friction surfacing	2
On the bending behavior of hybrid fiber–metal laminates (HFMLs) based on aluminum and glass/Kevlar fibers reinforced epoxy	2
A theoretical model of amplitude-dependent dynamical stiffness for cord-rubber air springs	2
Egg shell powder extraction and its application for water hyacinth (Eichhornia crassipes) natural fibre polymer composite mechanical, thermal behaviour and characterization analysis: Aquatic wa	2
CORRIGENDUM to “Application of adaptive neuro-fuzzy inference system for strength prediction of rubberized concrete containing silica fume and zeolite”	2
Effect of gradient structure on additively manufactured auxetic and hybrid auxetic structure for energy absorption applications	2
Recent advancements in self-healing materials and their application in coating industry	2
Thermo-mechanical modelling of the Friction Stir Spot Welding process: Effect of the friction models on the heat generation mechanisms	2
Mechanical and shape-memory behavior of homogenized NiTiHfPd alloys	2
Cellular lattice cores of sandwich panels fabricated by additive manufacturing: Effect of dimensions and relative density on mechanical behaviour	2
Investigating the effects of loading system on the fracture behavior of DCB specimens considering T-stress	2
Evaluations of nanomechanical and indentation creep of diffusion-bonded aluminum and austenitic stainless steel joint interface	2
Effect of B4C reinforcement and hot rolling on microstructure and mechanical properties of WE43 magnesium matrix composite	2
Brazing of sintered iron to mild steel for wind turbine brake pad applications	2
Experimental investigation of the polymer-metal hybrids interfacial bonding fabricated by fused deposition modeling	2
Analysis of delamination of composite laminates via extended finite element method based on the layerwise displacement theory and cohesive zone method	2
Investigating energy absorption of thin-walled steel structures with combined mechanisms including inversion, folding and expansion	2
Comparative analysis of direct search methods for material design optimization	2
Fatigue life prediction of lattice structures using a strain-life method based on an equivalent solid model	2
Effect of overlapping technique on the grain size distribution and grain orientation in friction stir processed aluminum alloys	2
Study of the ultrasonic welding of a polycarbonate-glass fiber laminate and comparison with adhesive bonding	2
Gas metal arc welding of XPF800 steel for automotive industry: Microstructural evaluation and mechanical properties investigation	2
Characterization of an additively manufactured coating using an upsetting test with miniaturized cylindrical specimen	2
Mechanical and corrosion performance of biodegradable iron porous structures	2
Metal matrix composites for sustainable products: A review on current development	2
Development of an improved structural integrity assessment correlation for circumferential through-wall cracked 90° shape-distorted pipe bends subjected to in-plane opening bending moment	2
The effects of alloying composition on plasticity and strength of notched metallic glasses	2
Response of a novel all-solid-state sodium-based-electrolyte battery to quasi-static and dynamic stimuli	2
Nonlinear finite element simulations on the mechanical response of the isothermally aged lead-free solders	2
Influence of excess silicon phase on the thermal expansion behaviours of Al-Si binary casting alloys	2
Investigating and comparing the mechanical behavior of multicellular structures made with PLA and ABS under lateral loading	2
Tribological behavior of tribo-pairs in water hydraulic radial piston pumps	2
Influence of heat treatment on the suitability for clinching of the aluminium casting alloy AlSi9	2
Mechanical properties and durability of concrete containing fly ash and GGBS for marine environment: A comprehensive study from laboratory perspective	2
Compression performance of 3D-printed ant-inspired lattice structures: An innovative design approach	2
Effect of strain rate on tensile behavior of tailor welded blanks	2
Effects of sinusoidal vibration of casting-roller on interface microstructure of Ti/Al laminated composites by twin-roll casting	2
Machinability study on laser-based powder bed fusion processed hypo-eutectic aluminium alloy composite (AlSi10Mg + NbC)	2
In-situ computed tomography analysis of the failure mechanisms of thermomechanically manufactured joints with auxiliary joining element	2
Experimental verification of multi-fibre hybridization influence on dynamic deflection and stress values of curved composite panel	2
Loading–unloading contact analysis of a fractal rough surface with functional gradation	2
Influence of curvy stiffeners on the axial crushing response of 3D-printed polymer composite cylindrical tubular structures	2
A 3D RVE-based computational homogenization approach for predicting the effective fourth-order elasticity tensor of periodic porous materials	2
Effect of microstructural constituents and morphological characteristics on low cycle fatigue behaviour of inter-critically annealed 20MnMoNi55 steel	2
Analysis of vibration characteristics of lattice-core sandwich annular spherical shells	2
Investigating hole effects on bending performance of aluminum beams with square cross-sections under three-point bending load and their implementation in light vehicles	2
Experimental evaluation and comparison of silica/biocarbon particulate-epoxy composites for high-strength applications	2