Coloration Technology

Papers
(The median citation count of Coloration Technology is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-06-01 to 2025-06-01.)
ArticleCitations
71
The roles of polymer relaxation phenomena, aqueous dye solubility and the physical properties of water in the mechanism of adsorption of a disperse dye on poly(ethylene terephthalate) fibres: Part 4 f29
Synthesis and application of nonionic Gemini surfactants based on grape seed oil25
Adsorption removal of Brilliant green and Safranin‐O contaminants from water using a hydrogel based on carboxymethyl cellulose and sodium alginate crosslinked by epichlorohydrin20
Colour matching of cotton exhaustion dyed using reactive dye mixtures in non‐aqueous siloxane media of D519
Colour stability during production of printed ocular prostheses18
Synthesis and characterisation of iron oxides: Effect of calcination temperature and their application as inorganic pigment17
Issue Information16
Evaluation of the extracts of purple basil (Ocimum basilicum L.) as natural pH‐indicator dyes anticipated to be utilised in intelligent food packaging—an optimisation stud16
Effect of organic biocolourants on lightfastness and mechanical properties of polylactic acid16
Colorimetric sensor based on polymeric thin film for arsenic quantitation using colour response calibration15
Solubility prediction of CI Disperse Red 4 and CI Disperse Red 15 in supercritical carbon dioxide based on the back propagation neural network14
Assessment of the UV inkjet ink penetration into laboratory papers within triticale pulp and its influence on print quality14
Aldehyde‐functionalised distyrylbenzene: Photophysical properties and primary amine sensitivity evaluation in solution and solid state13
The roles of elevated temperature and carriers in the dyeing of polyester fibres using disperse dyes: Part 2. Analysis of conventional models of dye adsorption12
Colour difference detection algorithm for warp‐knitted fabric based on image colour appearance model12
Enzymatic coloration of polyamide fabrics and its comparison with conventional dyeing11
Investigation of dyeing, antibacterial and antifungal properties of blended fabrics treated with plant‐based dyestuffs and mordants as shoe materials11
Novel bleach activator compounds derived from the reaction of isocyanic acid with selected nucleophiles11
Non‐allelic recombination interactive genetic algorithms for colour imagery reproduction in colour scheming11
Synthesis and deposition of bismuth oxychloride with a rose‐type flower shape and photoelectroactivity evaluation in the methyl orange discoloration reaction10
10
Eco‐friendly dyeing of cotton using waste‐derived natural dyes and mordants10
Issue Information9
The relationship between colour harmony and colour emotions—using two‐colour combinations applied on 3D colour configuration9
Multi‐colour recipe prediction through invertible neural network and clustering algorithm9
Ethylene glycol diglycidyl ether applied to crosslinking dyeing of cotton fabric with madder dye9
Optimisation of purple dyeing with Mexican cochineal in cotton with multivariate analysis and the response surface method9
Issue Information9
Comparison of the effect of metal mordants and bio‐mordants on the colorimetric and antibacterial properties of natural dyes on cotton fabric9
Enhancing the outline sharpness of crosslinked printed cotton fabrics using ethylene glycol diglycidyl ether9
Fluorescent whiteness measurement of textiles by multispectral imaging system8
A single‐step pad‐steam cationisation and dyeing process for improving dyeing properties of cotton fabrics8
Polyethylene terephthalate cap‐based bioreactors for combined domestic and dye wastewater treatment8
Mechanism and application of ozone fading: Oxidative decolorisation of disperse dyes and waste‐dyed polyester fabrics8
Methylthio‐substituted coumarin‐based fluorescent probe for highly specific and fast detection of hypochlorite and bioimaging application7
Redox kinetics of methylene green: Titanium trichloride as a novel photo redox agent7
Optimisation of cationic dye dyeing process of Porel fabrics using response surface methodology7
Investigation into the eco‐friendly, simultaneous tanning and reactive dyeing of leather7
Exhaust dyeing of meta‐aramid yarn at low temperature and time7
Natural dyeing of air plasma‐treated wool fabric with Rubia tinctorum L. and prediction of dyeing properties using an artificial neural network7
Determining the effect of enzymatic pretreatment on the low temperature dyeability of polyamide fabrics7
Waterless dyeing of polylactic acid with disperse dyes using decamethylcyclopentasiloxane as medium7
Effect of grey component replacement processing and varnishing on the light fastness of colours on cardboard prints7
Insights into the dyeing using natural indigo (Indigofera tinctoria): Toward an environmentally friendly garment7
Thiocarbazone‐appended coumarin: An easily accessible ratiometric fluorescent chemosensor for multianalyte (Zn2+ and Cu2+) systems7
Dyeing of polyamide fabrics with a reverse micellar system using soybean oil as a solvent7
Influence of different dispersants on the quality and stability of aqueous quinacridone magenta pigment dispersion for ink‐jet applications6
Enhancing pashmina fabric aesthetics: Assessing the dyeing efficacy of indigenous wild underutilised plants6
Synergistic anti‐bacterial activity of imidazole‐based azo dyes with polyvinylpyrrolidone‐coated silver nanoparticles6
The effect of zinc oxide nanoparticles on the weathering performance of wood‐plastic composites6
Surfactant screening techniques for effective dispersion of carbon black pigment6
Revisiting the sublimation printability of cellulose‐based textiles in light of ever‐increasing sustainability issues6
Unsupervised fabric defect detection based on multiscale image reconstruction and structural similarity assessment6
Towards structurally new cyanine dyes—investigating the photophysical and potential antifungal properties of linear substituted heptamethine dyes6
Instrumental shade sorting of coloured fabrics using genetic algorithm and particle swarm optimisation6
Digital ink‐jet printing of regenerated cellulose nanofibrous mats with reactive inks6
Cigarette smoke uptake by different woven fabrics: Analysis of mechanical and colour properties6
Introducing new methods based on the standard ISO/IEC 24790 to evaluate graininess for coloured printed images6
Issue Information6
Colorimetric sensing of H2PO4 using a Pb2+ complex of a pyridylazo dye in aqueous solution6
The mathematical model for colour preference in Chinese painting within museum lighting environments6
Spectrophotometry and colorimetry profiling of pure phenol red and cell culture medium on pH variation6
Effect of PEG‐400 on dyeing properties of cotton fabric in non‐aqueous medium system6
Progressive mask‐oriented unsupervised fabric defect detection under background repair5
Issue Information5
Natural dyeing of plasma treated wool with avocado seed extract and use of tartaric acid as bio‐mordant5
Photostability of Mannich‐type dyed silk fibroin with pyrazolone‐containing aromatic primary amine dyes5
The impact of clothing colour on skin tone perception and consumer preference5
Issue Information5
Colour stability of wood coatings pigmented with natural indigo from Isatis tinctoria after accelerated weathering5
Issue Information5
Research on a colour solid built by gridded colour mixing of nine primary‐coloured fibres and its neural network colour prediction approach5
Investigation of the dyeability and various performance properties of fabrics produced from flax and hemp fibres and their blends with cotton in comparison with cotton5
An overview of the science and art of encapsulated pigments: Preparation, performance and application4
4
Enhancing coloration performance and colour fastness of nano‐pigment ink‐jet‐printed blended fabrics through cationic and water‐repellent surface modification4
A cyanine‐based dual‐modal probe for fluorimetric detection of mercury ion and colorimetric sensing of pH4
Long short‐term memory model for predicting the angle‐dependent reflectance distributions for glossy and matte surfaces4
Effects of copper‐doping on electrochromic properties of titanium dioxide films4
Chlorophylls, lutein and β‐carotene play great but different roles in colour of rapeseed oil4
Enzymatic synthesis of sodium alginate‐g‐poly (acrylic acid) grafting copolymers as a novel printing thickener4
4
Investigation and feed‐forward neural network‐based estimation of dyeing properties of air plasma treated wool fabric dyed with natural dye obtained from Hibiscus sabdariffa4
Correction to Investigation into the development of novel lanthanide‐based luminescent colorants for application to textiles and paper materials4
Structural characterisation and coloration of ligno‐cellulose and protein fibre‐blended structures4
Sustainable discharge printing of marigold‐dyed cotton with eucalyptus wood ash extract and its optimisation by response surface methodology4
A Stearns–Noechel colour prediction model reconstructed from gridded colour solid of nine primary colours and its application4
4
Synthesis and application of novel glucose derived nonionic gemini surfactant4
Optimal design of colour formulation prediction for cotton fabrics based on NSGA‐II and TOPSIS4
The roles of polymer relaxation phenomena, aqueous dye solubility and the physical properties of water in the mechanism of adsorption of a disperse dye on poly(ethylene terephthalate) fibres: Part 3 p3
Post‐modification of azo dyes using an α‐phenyl diazo ester for improving the colour fixation properties of polyurethane fibre3
Effect of bleaching treatments on wool fabrics analysed via attenuated total reflection Fourier Transform–infrared spectroscopy3
Chemical constitutions in the Colour Index™: A century of colourant classification3
A dye–fibre system from food waste: Dyeing casein fibres with anthocyanins3
Vouwo mud dye: A material, microbiological and cultural approach to researching sustainable textile dyes3
Issue Information3
Comparative study of four different flavonoid compounds‐containing plant extracts functionalised waste wool for accelerating aqueous chromium(VI) reductive removal3
A new method for determining relative colour strength of dye based on new colour depth formulas. Part I: For different dyes with approximate hue3
Microencapsulation of Caucasian blueberries (Vaccinium arctostaphylos L.) anthocyanins: Colour stability in varying storage conditions3
Wool dyeing with purple sweet potato extract by enhancing dye uptake and stability using lecithin during the mordanting process3
Organoclay‐assisted vat dyeing of polypropylene nanocomposite fabrics3
Issue Information3
Indigo reduction by using microorganism: Comparison of reducing power between Dietzia sp. KDB1 and yeast (Saccharomyces cerevisiae)3
Flavonoid‐based yellow dye extract from safflower (Carthamus tinctorius L.) combined with chitosan for anti‐bacterial and ultraviolet‐protective functionalisation of silk3
The plasticisation model of dye diffusion: Part 1 introduction3
Effects on print quality of varying acrylic binder types in water‐based flexographic ink formulations2
Synthesis and characterization of iron oxides and their application as inorganic pigments in white paint2
The effects of heat treatment temperatures on photocatalytic activity of cobalt ferrite nanoparticles synthesised by microwave‐assisted combustion method2
Colour‐patterned fabric‐defect detection using unsupervised and memorial defect‐free features2
Syntheses and dyeing properties of novel water‐soluble reactive sulphur black dyes2
Colour gamut analysis of low‐cost dye‐sensitised solar cells using natural dyes2
Modified guar gum: An alternative source for printing of cotton fabric with reactive dye2
Colour‐patterned fabric defect detection based on an unsupervised multi‐scale U‐shaped denoising convolutional autoencoder model2
Issue Information2
Ultrasound‐assisted enzymatic scouring of jute optimised by response surface methodology and its natural dyeing2
The roles of elevated temperature and carriers in the dyeing of polyester fibres using disperse dyes: Part 1 fundamental aspects2
The plasticisation model of dye diffusion: Part 32
Evolving regularised random vector functional link by seagull optimisation algorithm for yarn‐dyed fabric colour difference classification2
The role of inorganic electrolyte (salt) in cellulosic fibre dyeing: Part 2 theories of how inorganic electrolyte promotes dye uptake2
Attention‐based vector quantisation variational autoencoder for colour‐patterned fabrics defect detection2
An evaluation of the properties of denim dyed with sulphur dyeing by elimination of pre‐treatment processes2
2
2
The effect of glucose oxidase enzyme on wool fibres2
2
4,5‐Dinitrosulfonefluorescein and related dyes: Kinetics of reversible rupture of the pyran ring and their interaction with lysozyme2
Dyeing properties of polylactic acid fabric with disperse dyes of different structures using decamethylcyclopentasiloxane as non‐aqueous media1
Microencapsulated carotenoids from orange sweet potato: Degradation kinetics and physicochemical properties1
Investigation of the printability of ethyl 2‐[4‐(1,3,4‐oxadiazol‐2(3H)‐thion‐5‐yl)phenylhydrazono]‐3‐oxobutyrate on coated and uncoated papers1
Investigation into the development of novel lanthanide‐based luminescent colorants for application to textiles and paper materials1
An edge‐aware‐based feature refinement algorithm for silk surface defect detection1
Extraction of flavonoid dyes from vine tea (Ampelopsis grossedentata) waste and application in bleached pulp dyeing1
Iron(III) complexes promote hydrogen peroxide activation for efficient degradation of dyeing wastewater1
Exploration on energy‐saved dyeing method for polyimide fabrics with alkali treatment1
Properties of a new nitrogen‐free additive as an alternative to urea and its application in reactive printing1
A rhodamine B‐based colorimetric chemosensor for sensitive and selective detection of Cu2+: Test strip analysis and density functional theory1
A review on reverse micellar approach for natural fiber dyeing1
1
1
1
Process improvement and efficiency analysis using the Single‐Minute Exchange of Dies method applied to the set‐up and operation of screen‐printing machines1
Enzymatic coloration of wool fabrics and its comparison with conventional dyeing1
Natural weathering of spruce wood chemically modified by re‐used ε‐caprolactone solution1
Effects of ozone treatment on denim garment properties1
A process for dyeing cotton with direct dyes possessing primary aromatic amino groups furnishing wash fastness exhibited by reactive dyes1
One‐step mini‐emulsion copolymerisation of waterborne polysiloxane‐modified polyacrylate/pigment hybrid latex and its application in textile pigment printing1
Application issue of anthraquinonoid vat dyes on inherently flame‐resistant fabrics1
Supercritical carbon dioxide (SC‐CO2) dyeing of cellulose acetate: An opportunity for a “greener” circular textile economy1
Relationship between wettability of cotton and dyeing properties of reactive dyes in a non‐aqueous medium system1
Sustainable scouring of cotton using extracts from wood ash and soapnut and its optimisation by response surface methodology1
The BioColour Library1
1
Issue Information1
Fabric colour measurement in the small region of CIELab colour space using a scanner‐based subtractive clustering fuzzy inference system1
1
The plasticisation model of dye diffusion: Part 41
Segmented modelling and analysis of disperse dye concentration based on multidimensional spectrum1
Preparation of cationic viscose and its salt‐free dyeing using reactive dye1
Issue Information1
Issue Information1
Thermochromic paint with three‐stage colour transition effect based on thermochromic microcapsules and its crosslinking modification1
pH‐responsive cotton fibre dyed by natural madder dye1
Synthesis and properties of poly(styrene‐co‐maleic acid) macromolecular reactive dyes1
0.15592098236084