Fullerenes Nanotubes and Carbon Nanostructures

Papers
(The median citation count of Fullerenes Nanotubes and Carbon Nanostructures is 2. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-01-01 to 2026-01-01.)
ArticleCitations
Enhanced electrochemical hydrogen storage performance of organophosphonic carboxylic acid-modified multiwalled carbon nanotubes/Bi2S3 composite49
On the real possibility of “super” hydrogen intercalation into graphite nanofibers37
Turning trash into tech: sustainable graphene production from biowaste33
Synthesis, identification and cytotoxic activity of a graphene oxide-based conjugates32
Synthesis and optoelectrical properties of chemically unzipped carbon nanotubes by modified Hummers’ method27
1-(2-pyridylazo) 2-naphthol-modified bacterial cellulose/multiwall carbon nanotube/silicon dioxide membrane for selectively adsorbed Er (III)22
Cytotoxicity and photothermal properties of graphene oxide conjugate with folic acid and a cytostatic agent of styryl thiazolopyrimidinium class22
Synthesis of graphene quantum dots inside a nanoreactor for fluorescence detection of dopamine20
One-step microwave synthesis of FeSe 2 @CNT as high-performance supercapacitor anode material20
Isotherm and kinetics study of Ni(II) ions adsorption from wastewater using carbon nanotubes decorated with ZnO nanoparticles19
On the structure of the Ti-Si-C-based composite obtained by self-propagating high-temperature synthesis with the use of graphene18
A review on carbon nanotube-based composites for electrocatalyst applications18
Influence of SrTiO 3 /Fe 2 O 3 nano-fillers assisted PVDF-HFP polymer nanocomposite films on di18
Synergy of reduced graphene oxide and metal oxides improves the power factor of thermoelectric cement matrix composites17
Adsorption of Cu(II) ve Zn(II) ions by alginate-based composites: Full factorial design approach17
Innovative multiwall carbon nanotubes synthesis on 3D nickel surface: a comparative study16
Multifunctional composites with a polymer matrix containing carbon nanotubes: a study of structural, physicochemical and operational characteristics15
Digital twins’ kinetics of virtual free-radical copolymerization of vinyl monomers with stable radicals. 1. Methyl methacrylate15
Experimental and theoretical investigation of mechanical and rheological properties of compatibilized XNBR/NR/GO nanocomposites15
Preparation of mesoporous poly(fullerene oxide) framework by thermal [3 + 2] cycloadditions and its application as a semiconductor photocatalyst13
Synthesis and utilization of luminescent hybrid films incorporating Y-CQDs for mercury ion detection13
Evidence for the cumulene cyclo[n]carbon formation in a compression reactor during the pyrolysis of acetylene in neon atmosphere13
Kinetic analysis of fullerene C 60 thermal degradation via deconvolution method12
C60(OH)32fullerenols: calculated temperature-sensitive isomeric interplay12
Determining the defect type in a graphene lattice12
Broadband electromagnetic wave absorption properties of RGO cement-based composite11
Resistivity of graphene oxide/alumina-mullite-cordierite ceramic conductive composites11
Comprehensive study on the mechanical property and fracture behavior of ultra-high strength concrete11
Physicochemical properties of soot in diesel engine lubricating oil: characterizations and impact on frictional characteristics11
Graphene nanoplatelet-coated electrodes with cellulose binders for 4-hydroxy-2,2,6,6-tetramethylpiperidine 1-oxyl-based aqueous posolyte11
Hydrogenation of [Li@C60]PF6: A comparison with fulleranes derived from C6010
Hierarchical flower-like FeCo-LDH/GO@montmorillonite composite for efficient catalysis of oxygen reduction10
Constructing an efficient segregated thermally conductive network for a PBX substitute using graphene aerogels10
The investigation of early hydration and pore structure of Portland cements containing waste dolomite powder based on 1H NMR10
Chitosan grafted with crown ether with high selectivity and adsorption on lithium-ion10
Effect of hybrid nanostructures based on derivatives of fullerene C 60 and vitamin B 12 on the germination of wheat seeds ( 10
SR/GNPs/Pn@SiO2 shape-stabilized phase change composites with low leakage rate and adjustable thermal energy storage10
On modeling of the kinetics of aggregation in low-polar C60 solutions10
Methylene blue degradation photocatalytic activity of C60 fullerene nanowhisker–ZnS:Mn-glycine composites9
Estimation of the efficiency of the C60 and C70 fullerenes as inhibitors of the radical chain oxidation of сumene9
Experimental investigation of activated carbon nanoflakes produced by thermal and chemical activation processes9
n -Pentanol blending modulates soot nanostructure and oxidative reactivity in kerosene combustion: a multi-scale mechanistic study9
Fullerene C 20 carbon nucleation induced by IR ns pulsed laser-generated plasma9
Effects of preparation temperature on alkynyl-functionalized graphene oxide9
A comparative study on electrospun fibers of cyanobiphenyl liquid crystal homologues9
One-step facile growth of nitrogen-doped graphene nanowalls by catalyst-free thermal chemical vapor deposition9
Impact of spheroidal graphite morphology on the functionalization of graphene oxide surface9
Internal energy and temperature of a carbon nanotube9
Enhancing the physical properties of polystyrene nanofibers by adding multiwall carbon nanotubes and natural dye8
A facile and novel synthesis of bimetallic copper-manganese oxide nanoparticles anchored on carbon nanotubes8
Oxidation evolutions of soot surface and pore properties with different O2-NO2 mixtures and temperatures8
Assessment of the quantum valence molecular machine for a rotaxanic complex8
Enhancement of nitrogen content in fullerene soot via radical decarboxylative coupling under catalytic and noncatalytic conditions8
Calculated isomeric populations of Er@C 828
Impacts of iodine on the properties of electrospun polymeric nanofibers8
Synthesis of hybrid nanostructures based on e -carboxy-dihydroxycobinamide and N -(monohydrofullerenyl)- l 8
Investigating the broom-like inclusions in type Ib diamond single crystal synthesized by high pressure high temperature8
Selective dispersion of semiconducting single-walled carbon nanotubes with aromatic polyimides7
Theoretical study of the efficiencies of graphyne supported Mo single-atom catalyst (SAC) and Mo-Ni dual-atom catalyst (DAC) on hydrogen evolution reaction7
Graphitization of flax shive cellulose modified by citric acid: properties of magnetic composites and their dye adsorption capacity7
Synergistic effect of alkali treatment and graphene filler on the mechanical characteristics of nettle fiber reinforced polymer composite7
Carbon nano-onions combined with methylene blue for simple assembly of organic cells and batteries7
Sustainable electrochemical sensor with enhanced catalytic activity utilizing interconnected Ag-MWNT nanocomposites on carbonized bamboo substrate7
Enhanced thermoelectric properties of cement composites with nitrogen-doped carbon nanotubes and Al, Ti co-doped ZnO7
The effect of pretreatment on the adsorption efficiency of activated carbon7
Exploring the symmetric division eccentric index of fullerenes: a topological approach7
Thermoelectric properties of pristine and defective α-graphyne nanoribbons with vacancies present in different positions7
Enhancing mechanical properties of cellulose acetate/carbon black nanofibers for oil spill cleanup7
Lightweight chopped carbon fiber/carbon composites with low thermal conductivity fabricated by vacuum filtration method6
Synthesis and characterization of MWCNTs nanocomposite for fabrication of tensometric transducers6
Lanthanide-modified graphene oxide and nanodiamond materials and their cytotoxicity6
Yellow fluorescent UV-curable epoxy acrylate/VTMS-modified GQDs coatings: study of UV-blocking and viscoelastic properties6
Peroxymonosulfate-assisted photocatalytic degradation of rhodamine B by g-C 3 N 4 nanoparticles modified with NiO cubes6
Synthesis of carbon nanostructures with SB3-12 carbonized in a salt system6
α-Zirconium phosphate nanosheets composite on cotton fiber for the removal of heavy metals6
Design of hierarchical porous carbon with three-dimensional network through solvent-free nanocasting method for CO2 capture6
Research on the innovative pretreatment to improve the adhesion and performance of diamond coatings6
Lemmas on topological symmetry between toroidal and Klein bottle fullerenes6
Improvement of the stability of graphene oxides in cement paste by sodium tripolyphosphate modification6
Thermal and electrical properties of palmitic acid/expanded graphite composite phase change materials for thermal energy storage6
Modification of morphological, structural and optical properties of graphene oxide by alteration molarity of aqueous KMnO 4 solution6
An insight into the effect of carbon nanofillers in glass fibre epoxy nanocomposites through dielectric spectroscopy6
Onion-like magnetic meso-porous carbon surfaces for the efficient adsorption of aqueous crystal violet dye molecules6
Comparison study on carbon nanomaterial synthesis from methane and acetylene in DC arc plasma6
Effect of detonation nanodiamonds on the properties of diamond microcrystals grown from carbon black in a C–O–H medium at high pressure and high temperature6
Polymer-free transfer of large area CVD-grown graphene film for THz application5
Quantum structure-property relationship (QuaSPR) assay of the molecular machine for rotor-axon congeners in a rotaxanic complexes5
Hydrothermal carbonization of biomass: a commentary5
Evaluation of the thermal properties of water and water/ethanol carbon-based nanofluids5
Theoretical investigations on structures and properties of B 2 N 2 C 145
Graphene oxide reinforced bauxite tailings-based geopolymers: mechanical and microstructural properties investigations5
The influence of solvents on the formation of one-dimensional fullerene (C 60 ) nanowhiskers5
Polarizability of quasi-1D nanostructures (C 60 ) n in terms of molecular and periodic paradigm5
Effects of dolomite powder on the properties of C30 and C50 concretes5
Degradation of methylene blue catalyzed by a photo-Fenton reaction of g-C 3 N 4 /Fe 3 O 5
Study on friction properties of silver/polydopamine modified graphene oxide nanocomposites as lubricant additive5
Influence mechanism of dispersion and agglomeration characteristics of micron/nano carbon dust on its combustion kinetics and explosion process5
Advanced Ni x /MoS x /MOF-2@g-C 3 N 4 carbon nanostructures 5
Research on the carbonation resistance of concretes containing dolomite powder5
Enrichment of a fullerene mixture with endohedral metallofullerenes: methodology and evaluation5
A study of preparation and properties of epoxy resin/carbon fiber/phenolic residual carbon composites with adjustable negative permittivity behavior5
Preparation of bifunctional carbon quantum dots derived from Chrysanthemum for ascorbic acid detection and cell imaging5
Organosilicon elastomers of MWCNTs and nano-sized metals for heating purposes5
Nonmetallic catalysts with high activity and selectivity for the electrocatalytic reduction of CO 2 to CO5
Nickel–tungsten oxides anchored on nitrogen-doped hollow carbon sphere for supercapacitor cathodes5
Role of nitrogen and silver compounds in photocatalytic properties of carbon nanoparticle5
Carbon-coated sodium vanadium phosphate for high-performance sodium-ion batteries5
Length reduction kinetics of multiwalled carbon nanotubes correlated to planetary ball mill impact energy5
Effect of graphene oxide on the microstructure and hydration characteristics of fibre reinforced cementitious composites5
Cathodic protection of reinforced concrete facilitated by using CNT-CF/cement-based auxiliary anode5
New sonochemical reactions of the C60 fullerene with amino alcohols yielding morpholine–C60 adducts5
CSA-doped PANI-CNT nano composites for Ku band microwave shielding applications5
Mechanical and microstructural behavior of industrial spent catalyst waste and boron carbide reinforced aluminum matrix composites5
Single-atom catalysts (SACs) for CO 2 to CO conversion using Cu, Ni, and Co on graphene flakes support; a DFT study5
Coupling of aptamers with reduced graphene oxide for detection of herpes simplex virus 2 protein marker5
ω-Transformation: how to combine all fullerenes C n ( n  ≥ 36) into a single family5
The effects of cinnamon, ginger and sesame oils on in-situ solvothermal reduction of multi-layered graphene oxide in epoxy to improve hydrophobicity and corrosion resistance5
Synergistic effects of combined multi-walled carbon nanotubes and glass fibers on concrete: experimental and economic analysis5
Cobalt removal and pore filling in polycrystalline diamond layer of polycrystalline diamond compact5
Porous carbon materials derived from apricot pits for electrical energy storage devices and sorption technologies: a review of the precursors, preparation methods, and applications4
Functionalization of fullerene soot through oxidative decarboxylative coupling with silver dinitrobenzoate4
Enhanced evaporation-induced electricity generation of reduced graphene oxide membrane via graphene quantum dots4
Study on friction properties of polydopamine modified graphene oxide as lubricant additive4
Synthesis and investigation of physical properties of CNT/Ni0.5Zn0.5Fe2O4 nanocomposites with low density4
Extrastrong aggregates of detonation nanodiamonds: structure and formation4
Oxygen and nitrogen-doped carbon particles derived from pyrolysis of Chlorella vulgaris and Spirulina platensis microalgae as an efficient electrode material for supercapacitor applicati4
Research on the growth state and performance of diamond coatings based on different carbon source concentration and temperature4
Effect of carbon fibers modification on joint adhesion steel-epoxy resin-aluminum4
Determining the irregular chromatic number of graphs using a rank-based genetic algorithm4
Virtual vibrational spectrometer for sp2 carbon clusters and dimers of fullerene C604
Nano-carbon octadecahedron: in situ carbonization of DTAB of aggregates in concentrated calcium chloride solution4
Electrochemical behavior of NiWO4 modified by ultrasonic and laser irradiation4
A single liquid chromatography procedure to concentrate, separate and collect size-selected polyynes produced by pulsed laser ablation in water4
Polarizability of exohedral lithium derivatives of fullerene C 604
Analysis of coated samples containing hydroxyapatite/multiwalled carbon nanotubes on 2205 DSS substrate4
Fluorinated carbon nanotubes as nonvolatile additive to the active layer of polymer/fullerene solar cells4
Microwave activated peach pit carbon enhances S-band electromagnetic absorption performance4
Fluorinated graphene and its catalytic performance for AP pyrolysis: the promotion of F doping4
Effects of methane concentration on tribological properties of diamond films prepared on different ceramic substrates4
Intense Continuous Wave Laser to Synthesize Luminescent Solution of Carbon Dots4
Study on the co-pyrolysis behavior of coking coal and semicoke and the carbon structure of pyrolysis char4
Facile synthesis of high-density and vertically aligned carbon nanotube arrays on an acid treated stainless steel mesh4
Construction of N-doped carbon nano-hollow cubes under salt separation strategy4
Surface characteristics, pore size and enhanced chemical resistance using graphene oxide nano sheets in ultrafine slag cement mortars4
Functionality of CNT-C xerogel as the electrode in a capacitive deionization system4
Determination of the thermoelectric properties of exfoliated graphitic carbon nitride-filled unsubstituted polythiophene composites4
Effect of the annealing process on Ni catalyst film grown using the vacuum thermal evaporation method4
Optical band gap and photoluminescence characteristics of graphene oxide prepared via atmospheric plasma technology4
Graphene oxide-based stationary phase synthesis and separation of drug molecules for liquid chromatography (HPLC) analysis4
Plasma treatment on flame soot: view from nanostructure and reactivity of soot4
High-yield synthesis of vertically aligned carbon nanotube arrays on acid-treated vermiculite4
Synthesis of oil-soluble carbon dots modified by ionic liquid groups as the high-performance lubricant additives4
Effect of rGO on photocatalytic performance of Fe 2 O 3 -ZnO/rGO nanocomposite4
Intelligent interpretation of the astronomical UIE bands: the spectra similarity4
Facile preparation of fullerenol-based humidity sensor with highly fast response3
Thermo-oxidative degradation of carbon nanotubes and related nanostructures: role of acidic environment and chloride ions3
Effects of MWCNTs content and dry density on hydro-structural characteristics of bentonite during drying and wetting3
Hexa-(2-ethylhexyl)-hexa-peri-hexabenzocoronene as archetypal model compound of asphaltenes and MAONs3
Fabricating nylon/multiwalled carbon nanotube (MWCNT) nanocomposites for potential use in triboelectric nanogenerators (TENGs)3
The effect of structure on the conductivity of disordered carbon (the case of graphene-containing shungite)3
Facile synthesis of mesoporous activated carbons based on ash tree for methylene blue adsorption: Mechanism, kinetics, isotherm, and thermodynamic studies3
“Comparative study of Graphene Oxide sand Composite (GOSC) and Graphene Coated iron Oxide (GCIO), for Pb 2+ ion removal”3
Investigation of the physical and chemical structure of NSC from sucrose3
Catalytic performances of fluorine-doped graphene/Pb composite for thermal decomposition of ammonium perchlorate3
Porous carbon materials for adsorption: a mini-review3
Optical properties of carbon dots generated in liquid by pulsed IR laser at 1064 nm3
Optimized PLA/MWCNT nanocomposite scaffolds enhance SHED differentiation for dentin–pulp complex regeneration: an in vitro evaluation3
Tunable lithium storage and transport in graphene and graphene quantum dots: a DFT study3
Correction3
Influence of graphene oxide on the long-term durability behaviour of high-strength rubberised concrete3
Preparation and mechanism analysis of nano-Mg(OH)2 by electroconversion of MgCl23
Preparation, wear resistance, and impact toughness of homoepitaxial diamond film deposited on polycrystalline diamond compact by HFCVD method3
Fabrication of graphene and N-doped graphene aerogels and comparing their electrical, mechanical, and adsorption capacity properties3
Synthesis of nitrogen and phosphorus co-doped graphene quantum dots as metal-free electrocatalysts for ethanol electrooxidation3
High-efficiency photocatalytic hydrogen production over onion carbon/Mn 0.5 Cd 0.5 S3
Synergistic effect of fast extrusion furnace (FEF) black on viscosity and rheological properties of ethylene propylene diene monomer vulcanizate3
Carbon dots in food detection: synthesis, properties, applications and perspectives for improvement3
Effects of various functional groups in graphene on the tensile and flexural properties of epoxy nanocomposites: a comparative study3
Improved performance of graphite coated by hard carbon of PTCDA sodium salt for lithium-ion batteries3
Mechanical properties and microcosmic mechanism of multi-walled carbon nanotubes reinforced ultra-high strength concrete3
Nanomaterial-infused pozzolana portland cement composite: Exploring mechanical strength, durability, and microstructure properties3
Using the graph p-distance coloring algorithm for partitioning atoms of some fullerenes3
Energy storage properties of symmetric and unsymmetric meso-aryl porphyrin derivatives on carbon felt electrode3
Effect of graphene oxide on the microstructure and hydration characteristics of ultrafine slag cement composites3
Direct Z-scheme photocatalytic removal of ammonia via the narrow band gap BiOCl/g-C 3 N 4 hybrid ca3
Preparation and characterization of PVA/MWCNT nanocomposites: a composition dependence study of structural, optical and mechanical properties3
Enhanced mechanical, thermal and optical properties of poly (vinyl alcohol)/functionalized-graphitic carbon nitride composites3
Characterization of heterogeneity of CVD graphene on copper foil by scanning probe microscopy and Raman spectroscopy3
Effects of multi-wall carbon nanotubes (MWCNTs) on strength enhancement and microstructural changes in high-performance concrete3
Triple crossed 3 C 26 cyclic cumulene catenane3
Effect of three MWCNTs-COOH (chiral, zigzag and armchair) on the mechanical properties and water absorption of cement-based composites3
Performance of CNT reinforced cement based material: Electromagnetic shielding, mechanical properties and water absorption behavior3
Preparation of Fe3O4-carbon black/poly(vinylidene fluoride) composites with enhanced properties3
Pyrolysis mass-spectrometry study of detonation nanodiamonds surface chemistry3
Synthesis, characterization and electrochemical properties of Pd,PdO/Ni@C nanoparticles as an anode in acidic direct methanol fuel cells3
The effect of pressure on the soot fractal dimension in laminar coflow diffusion RP-3 kerosene flames3
Equilibrium polydisperse distributions of non-covalently aggregated nanoparticles in solution3
Fractal characteristics of porous carbon materials obtained from walnut shells3
Statement of Retraction: Efficient synthesis and characterization of C60 and C70 acetylacetone monoadducts for photochemical applications3
A facile, green synthesis of carbon quantum dots from folium cycas for rapid and sensitive determination of Fe 3+ and cell imaging3
Effect of fullerene (C 70 ) on the structural, morphological optical and thermal properties of poly(butyl methacrylate) (PBMA)3
Preparation of CNT@NiM-OH nanocomposites for high-performance supercapacitors3
Effects of prolonged ultrasonic treatment on electrical conductivity in multi-walled carbon nanotube-polystyrene composites3
Facile preparation of a dual-emission paper-based fluorescent sensor based on carbon quantum dots and rhodamine B for dual-mode detection of Hg 2+3
Molecular dynamics of He encapsulation in the C20H20 cage at the threshold energy3
KCl-assisted DTAB self-aggregation: a new strategy for carbon nanosheet synthesis3
Modification effect of multi-walled carbon nanotubes and silica fume on recycled brick aggregate self-compacting mortar: mechanical properties and microscopic mechanisms2
Study on the high-temperature resistance of metakaolin-fly ash-based geopolymers2
Influence of solvent system on the optoelectrical properties of PCL/carbon black nanofibers2
Investigation of the structure-property relation for graphene oxide based acrylonitrile butadiene styrene nanocomposites2
Bioderived nanocarbons as electrodes for electrochemical capacitors2
Synthesis and characterization of hydrogel nanocomposite based on functional CNTs–copper sulfate-polymethyl methacrylate2
Rapid mass production of graphene using solid-phase thermal synthesis2
Efficient synthesis of carbon nanospheres from waste plastic using a microwave-initiated, biochar-supported bimetallic catalytic method2
Preparation and structure activity relationship of Cp 2 -Fe-PBI catalyst for fuel cells2
Phosphoric acid functionalized carbon dots for supercapacitor applications2
Tailoring carbon supports for high-stability platinum-based catalysts in proton exchange membrane water electrolysis2
Porous carbons from durian wastes for dye adsorption: a commentary2
Synthesis and properties of graphene-like porous carbon from modified cellulose2
Cryoscopic study of aqueous solutions of sulfur-containing amino acids adducts of fullerene C 602
Wear characteristics of a CNTs reinforced aluminium composited fabricated by the solution mixing process2
Stretching bond force constants comparisons between armchair boron nitride and carbon nanotubes2
Luminescence enhancement of carbon dots synthesized by intense CW laser at 450 nm irradiating biocompatible solutions2
Composite photocatalyst C 3 N 4 /BiVO 4 for adsorption/photocatalytic degradation of drugs in w2
Fullerene-indene adducts (ICMA & ICBA) in an astrochemical perspective. Part 2: FT-IR spectroscopy from −180 °C to +250 °C2
Application of mechanical separation method with filtration for nanodispersed FeNi powders with carbon coating2
Utilizing seashells for the removal of malachite green dye pollution: a sustainable approach in textile wastewater treatment2
Green functionalization of carbon nanotubes via Diels–Alder in deep eutectic solvent for targeted doxorubicin delivery2
SnO wrap on SnS reinforced thermoelectric properties of CF/EG cement matrix composites2
Investigation of optical and electrical properties of piperic acid-filled polyaniline composites2
Understanding the role of natural pozzolana in regulating the early hydration reaction process and microstructure of Portland cement2
High-efficiency bio-inspired graphene oxide composite membranes for water treatment and heavy metal ion separation2
Preparation, characterization, and combustion properties of NGO/GF/B composite system2
Preparation of carbon nanorods by in situ carbonisation using TTAB in Na 2 SO 4 system2
Dry ball-milling preparation and characterization of graphite–phthalocyanine composites2
Electromagnetic shielding and wave absorbing properties of graphene oxide grafted carbon fiber reinforced concrete2
CeNiO 3 /rGO composite as an efficient photocatalyst for the removal of environmental pollutants2
Synthesis of novel rigid structures derived from 1,1′-biadamantane2
Imparting hybrid carbon nanotube and graphene to PVA/chitosan hydrogels for copper ion removal applications2
Experimental study of graphene synthesis by different gas-doped plasma2
Synthesis and characterization of graphene oxide using a modified Hummers method for enhanced quality and yield2
Energy barriers of Be and B in passing through the C 60 fullerene cage2
Bio-friendly fluorescent polyvinyl alcohol/gelatin/chitosan hydrogel membranes strengthened by g-C 3 N 4 /CQDs nanocomposite: Prep2
Thermal and morphological properties of electro spun polyamide – poly vinyl alcohol/CNPs nanofibers for filtration process2
Insights into the effect of CNTs on cement hydration from the perspective of water evolution2
Biomarker detection using boron carbide layer: a first-principles study2
Enhanced power factor of expanded graphite phase change thermoelectric cement composites by metal oxides2
Preparation of C-S-H seeds from waste glass powder and its effect on early performance of cement paste2
Synthesis of mesoporous carbon particles with different pore sizes by soft template method2
Enhancement effect of multiwalled carbon nanotubes on mortars prepared with different grades of recycled fine aggregates2
0.22465920448303