Journal of Natural Fibers

Article	Citations
Effect of natural filler materials on fiber reinforced hybrid polymer composites: An Overview	125
Chemical Composition and Mechanical Properties of Natural Fibers	94
Influence of Stacking Sequence and Fiber Content on the Mechanical Properties of Natural and Synthetic Fibers Reinforced Penta-Layered Hybrid Composites	81
Evaluation of Mechanical and Thermal Properties of Jute and Ramie Reinforced Epoxy-based Hybrid Composites	70
Potential of Natural Fibers in Composites for Ballistic Applications – A Review	69
Characterization of Natural Cellulose Fiber from the Barks of Vachellia farnesiana	69
Thermal Properties of Natural Fiber Sisal Based Hybrid Composites – A Brief Review	65
Utilization of Taguchi Technique to Enhance the Interlaminar Shear Strength of Wood Dust Filled Woven Jute Fiber Reinforced Polyester Composites in Cryogenic Environment	60
Evaluation of Mechanical and Water Absorption Behavior of Natural Fiber-Reinforced Hybrid Biocomposites	57
Tribo-Mechanical characterization of carbonized coconut shell micro particle reinforced with Cissus quadrangularis stem fiber/epoxy novel composite for structural application	55
Investigation on the Physicochemical and Mechanical Properties of Novel Alkali-treated Phaseolus vulgaris Fibers	52
Fabrication of Automobile Component Using Hybrid Natural Fiber Reinforced Polymer Composite	51
Impact of Silane Treatment on Characterization of Ipomoea Staphylina Plant Fiber Reinforced Epoxy Composites	51
Extraction and Characterization of Natural Fibers from Citrullus lanatus Climber	51
Sound Absorption of Hemp Fibers (Cannabis Sativa L.) Based Nonwoven Fabrics and Composites: A Review	48
Effect of Nano Fillers on Mechanical Properties of Luffa Fiber Epoxy Composites	46
An Investigation into the Mechanical and Wear Characteristics of Hybrid Composites: Influence of Different Types and Content of Biodegradable Reinforcements	46
Flax/basalt/E-glass Fibers Reinforced Epoxy Composites with Enhanced Mechanical Properties	43
Lignocellulosic Fiber Cement Compatibility: A State of the Art Review	42
An Investigation into the Tribological Properties of Bidirectional Jute/Carbon Fiber Reinforced Polyester Hybrid Composites	42
Characterization of Natural Cellulosic Fiber from Cocos nucifera Peduncle for Sustainable Biocomposites	41
Physical and Mechanical Behavior of Hemp and Nettle Fiber-Reinforced Polyester Resin-based Hybrid Composites	41
Influence of Haritaki (Terminalia chebula) nano-powder on thermo-mechanical, water absorption and morphological properties of Tindora (Coccinia grandis) tendrils fiber reinforced epoxy composites	40
Bio-composite film from corn starch based vetiver cellulose	40
Influence of Stacking Sequence on the Mechanical and Water Absorption Characteristics of Areca Sheath-palm Leaf Sheath Fibers Reinforced Epoxy Composites	38

Extraction and Characterization of Cellulose Fibers from the Stem of Momordica Charantia	37
Synthesis and Mechanical Properties of Natural Fiber Reinforced Epoxy/Polyester/Polypropylene Composites: A Review	36
Impact of alkali treatment and fiber length on mechanical properties of new agro waste Lagenaria Siceraria fiber reinforced epoxy composites	35
Mechanical and thermal properties of wood fiber reinforced geopolymer composites	34
Mechanical and Thermal Properties of Chloris barbata flower fiber /Epoxy Composites: Effect of Alkali treatment and Fiber weight fraction	33
Drilling Performance of Natural Fiber Reinforced Polymer Composites: A Review	32
Characterization of Chemically Treated Limonia Acidissima (Wood Apple) Shell Powder: Physicochemical, Thermal, and Morphological Properties	32
Investigation of Mechanical Properties of Jute Fiber Reinforced Low Density Polyethylene Composites	31
Recent Progress on Natural Lignocellulosic Fiber Reinforced Polymer Composites: A Review	31
Effect of Alkalization on Characterization of Ripe Bulrush (Typha Domingensis) Grass Fiber Reinforced Epoxy Composites	31
Physico-chemical, Thermal and Tensile Properties of Alkali-treated Acacia Concinna Fiber	30
Characterization of Natural Cellulosic Fibers from Stem of Symphirema Involucratum Plant	30
Antimicrobial Activity of Natural Dyes – A Comprehensive Review	29
Cellulosic Fillers Extracted from Argyreia Speciose Waste: A Potential Reinforcement for Composites to Enhance Properties	29
Extraction and Characterization of Corn Leaf Fiber	29
Study on Mechanical Properties of Basalt Fibers Superior to E-glass Fibers	29
Eco-Friendly Isolation Of Colorant From Arjun Bark For Dyeing Of Bio-Mordanted Cotton Fabric	29
Vibration and Wear Characteristics of Aloevera/Flax/Hemp Woven Fiber Epoxy Composite Reinforced with Wire Mesh and BaSO4	28
Physical and Mechanical Properties of Rambans (Agave) Fiber Reinforced with Polyester Composite Materials	28
RSM Optimization of Wool Dyeing withBerberis ThunbergiiDC Leaves as a New Source of Natural Dye	28
Characterization of Natural Cellulose Fibers from the Stem of Albizia Julibrissin as Reinforcement for Polymer Composites	27
A Review on Chemical Modification by using Sodium Hydroxide (NaOH) to Investigate the Mechanical Properties of Sisal, Coir and Hemp Fiber Reinforced Concrete Composites	27
Influence of Chemical Treatment on the Physico-mechanical Characteristics of Natural Fibers Extracted from the Barks of Vachellia Farnesiana	27
Extraction, Characterization and Enzymatic Degumming of Banana Fiber	26
Physico-chemical and Morphological Characterization of Cellulose Fibers Extracted from Sansevieria roxburghiana Schult. & Schult. F Leaves	26
Influence of Chemical Treatment and Moisture Absorption on Tensile Behavior of Neem/banana Fibers Reinforced Hybrid Composites: An Experimental Investigation	25
Physical and Mechanical Inherent Characteristic Investigations of Various Jordanian Natural Fiber Species to Reveal Their Potential for Green Biomaterials	25
Evaluation of Mechanical and Wear Performances of Natural Fiber Reinforced Epoxy Composites	24
Fiber Extraction and Characterization from Typha Domingensis	24
Extraction and Characterization Studies of Cellulose Derived from the Roots of Acalypha Indica L	24
Green Dyeing of Wool Yarns with Yellow and Black Myrobalan Extract as Bio-mordant with Natural Dyes	24
Suitability Evaluation of Sida mysorensis Plant Fiber as Reinforcement in Polymer Composite	23
Sustainable Application of Microwave Assisted Extracted Tea Based Tannin Natural Dye for Chemical and Bio-Mordanted Wool Fabric	23
Comprehensive Characterization of Industrially Discarded Cymbopogon Flexuosus Stem Fiber Reinforced Unsaturated Polyester Composites: Effect of Fiber Length and Weight Fraction	23
Comparative study for efficacy of chemically treated jute fiber and bamboo fiber on the properties of reinforced concrete beams	23
Optimization of Fastness Properties with Gray Relational Analysis Method in Dyeing of Hemp Fabric with Natural and Classic Mordant	23
Sustainable Development of Cissus Quadrangularis Stem Fiber/epoxy Composite on Abrasive Wear Rate	23
Characteristics of Agro Waste Fibers as New Thermal Insulation and Sound Absorbing Materials: Hybrid of Date Palm Tree Leaves and Wheat Straw Fibers	23
Elaboration and Characterization of Flax Fiber Reinforced High Density Polyethylene Biocomposite: Effect of the Heating Rate on Thermo-mechanical Properties	22
A Review on Silver Nanoparticles -green Synthesis, Antimicrobial Action and Application in Textiles	22
A New Study on Tribological Performance of Cissus Quadrangularis Stem Fiber/Epoxy with Red Mud Filler Composite	22
Dependency of Sisal and Banana Fiber on Mechanical and Durability Properties of Polypropylene Hybrid Fiber Reinforced Concrete	22
Isolation of Cellulose Nanofibers from Oryza sativa Residues via TEMPO Mediated Oxidation	21
Biowaste Management: Banana Fiber Utilization for Product Development	21
Optimization of dyeing process variables for eco-friendly dyeing of cotton fabric with babul bark extract as a natural dye and gallnut extract as a bio-mordant	21
Characterization of New Cellulosic Fibers Obtained fromZingiber Officinale	21
Alkali Treatment Effect on Physicochemical and Tensile Properties of Date Palm Rachis Fibers	21
A comparative review of Nettle and Ramie fiber and their use in biocomposites, particularly with a PLA matrix	21
Genetic Optimization of Machining Parameters Affecting Thrust Force during Drilling of Pineapple Fiber Composite Plates – an Experimental Approach	21
Determination of Milling Performance of Jute and Flax Fiber Reinforced Composites	20

Calcium Borate Particles: Synthesis and Application on the Cotton Fabric as an Emerging Fire Retardant	20
Physico-mechanical Properties of Unsaturated Polyester Resin Reinforced Maize Cob and Jute Fiber Composites	20
Antimicrobial and UV Protection Properties of Cotton Fabric Using Enzymatic Pretreatment and Dyeing with Acacia Catechu	20
Influence of Jute Fiber on Tensile, Electrical, and Permeability Characteristics of Slag Concrete: A Better, Cheaper, and Eco-Friendly Substitute for Conventional Concrete	20
Characteristics and Properties of Lemongrass (Cymbopogan Citratus): A Comprehensive Review	20
Evaluation of Mechanical and Water Absorption Behaviors of Jute/Carbon Fiber Reinforced Polyester Hybrid Composites	20
Extraction and Characterization of Munja Fibers and Its Potential in the Biocomposites	20
Dry Sliding Wear Behavior of Chemically Treated Sisal Fiber Reinforced Epoxy Composites	19
Tribological and Thermo-Mechanical Performance of Chemically Modified Musa Acuminata / Corchorus Capsularis Reinforced Hybrid Composites	19
Hybrid Effect of PJFs/E-glass/Carbon Fabric Reinforced Hybrid Epoxy Composites for Structural Applications	19
Simple and Easily Applicable Method for Reducing Freshwater Consumption in Dyeing of Wool Fabric	18
Application of Multifunctional Reactive Dyes on the Cotton Fabric and Conditions Optimization by Response Surface Methodology	18
Isolation and Characterization of Nanocrystalline Cellulose from Ramie Fibers via Phosphoric Acid Hydrolysis	18
The Influence of Fiber Treatment on the Morphology, Water Absorption Capacity and Mechanical Behavior of Curauá Fibers	18
Bark Residues Recovery of Juglans Regia. L For the Dyeing of Wool Fabrics : Development of Microwave-assisted Extraction and Dyeing Processes	18
Influence of Vachellia nilotica Subsp. indica Tree Trunk Bark Nano-powder on Properties of Milkweed Plant Fiber Reinforced Epoxy Composites	18
Selection of Cotton Fabrics Using EDAS Method	18
Physico-Mechanical Properties and Taguchi Optimized Abrasive Wear of Alkali Treated and Fly Ash Reinforced Himalayan Agave Fiber Polyester Composite	18
Physicochemical Properties of New Plant Based Fiber from Lavender Stem	18
Establishing a New International Standard for Natural Dyed Textile Goods [Natural Organic Dye Standard (NODS)]	18
Effect of stacking sequence on dynamic mechanical properties of Indian almond – Kenaf fiber reinforced hybrid composites	18
UV Protection and Dyeing Properties of Wool Fabrics Dyed with Aqueous Extracts of Madder Roots, Chamomiles, Pomegranate Peels, and Apple Tree Branches Barks	18
Extraction and Characterization of a New Natural Cellulosic Fiber from Bark of Ficus Carica Plant as Potential Reinforcement for Polymer Composites	18
Enhancement of Mechanical Behavior of PLA Matrix Using Tamarind and Date Seed Micro Fillers	17
Sound Absorption of Microperforated Panel Made from Coconut Fiber and Polylactic Acid Composite	17
Air Permeability and Water Vapor Resistance of Differently Finished Cotton and Cotton/Elastane Single Jersey Knitted Fabrics	17
Extraction and Characterization of a New Lignocellulosic Fiber from Yucca Treculeana L. Leaf as Potential Reinforcement for Industrial Biocomposites	17
Enhancing Physical Properties of Viscose by Preparing Viscose/Keratin/Nano ZnO Composite Fabric	17
An Experimental Study of Physical, Mechanical, and Thermal Properties of Rattan-Bamboo Fiber Reinforced Hybrid Polyester Laminated Composite	17
Characterization of Natural Fibers Extracted from Banana Inflorescence Bracts	17
Extraction of Nanofibrillated Cellulose from Water Hyacinth Using a High Speed Homogenizer	17
Characterization of the Cellulose Fibers Extracted from the Bark of Piliostigma Racemosa	17
Mechanical Characteristics Study of Chemically Modified Kenaf Fiber Reinforced Epoxy Composites	17
Characterization of New Natural Fiber from the Stem of Tithonia Diversifolia Plant	17
Effect of Fiber Volume Fraction on Mechanical and Fire Resistance Properties of Basalt/Polyester and Pineapple/Polyester Composites	17
Sustainable Isolation and Application of Rose Petals Based Anthocyanin Natural Dye for Coloration of Bio-Mordanted Wool Fabric	17
Investigation of Optimal Alkali-treated Perotis indica Plant Fibers on Physical, Chemical, and Morphological Properties	17
Sustainable development of needle punched nonwoven fabrics from silk worm cocoon waste for oil spill removal	17
Mechanical and Sound Absorption Behavior of Sisal and Palm Fiber Reinforced Hybrid Composites	17
Fabrication of Oregano-Olive Oil Loaded PVA/Chitosan Nanoparticles via Electrospraying Method	16
Physico-Chemical Properties of Alkali Treated Cellulosic Fibers from Fragrant Screw Pine Prop Root	16
Systematics and Botanical Characteristics of Industrial Hemp Cannabis Sativa L	16
Bast Fiber Reinforced Green Polymer Composites: A Review on Their Classification, Properties, and Applications	16
A Review on Factors Affecting Machinability and Properties of Fiber-Reinforced Polymer Composites	16
Characterization of New Cellulosic Cyrtostachys renda and Ptychosperma macarthurii Fibers from Landscaping Plants	16
X-ray Diffraction: An Efficient Method to Determine Microfibrillar Angle of Dry and Matured Cellulosic Fibers	16
Systematic Review on Reinforcing Mortars with Natural Fibers: Challenges of Environment-Friendly Option	16
The Effects of Stacking Sequence on the Mechanical and Water Absorption Properties of Areca-Pineapple Fiber-based Epoxy Composites	16
Sequestration of Pb(II) onto Phosphate Modified Fibrous Prunus Dulcis Seed Shell: Kinetic, Thermodynamic, Isotherm, Desorption and Reusability	16
Optimization of the Application of Walnut Green Peel Pigment in Wool Fiber Dying and Fixing Process under Microwave-assisted Condition	16
Economic Impacts of Bt (Bacillus thuringiensis) Cotton	16
Multifunctional Finishing of Woolens with Lemongrass Oil	15
Comparative Evaluation of Chemical Treatment on the Physical and Mechanical Properties of Areca Frond, Banana, and Flax Fibers	15
Characterization of Untreated and Alkalized Eichhornia Crassipes Fibers and Its Composites	15
New Cellulosic Fibers from Washingtonia Tree Agro-wastes: Structural, Morphological, and Thermal Properties	15
Sea Sand Abrasive Wear of Red Mud Micro Particle Reinforced Cissus quadrangularis Stem fiber/epoxy Composite	15
Benign Felt-proofing of Wool Fibers Using a Keratinolytic Thermophilic Alkaline Protease	15
The Effect of Alkaline Treatment on Mechanical Performance of Natural Fibers-Reinforced Plaster: Part II Optimization Comparison between ANN and RSM Statistics	15
A Facile Degumming Method of Kenaf Fibers Using Deep Eutectic Solution	15
Mechanical and Water Transport Characterization of Indian Almond – Banana Fibers Reinforced Hybrid Composites for Structural Applications	15
Comparative Analysis on Thermo-physiological Behavior of Eri Silk, Wool and Bamboo Knitted Fabrics Toward Sportswear	15
Physico-mechanical, Chemical Composition and Thermal Properties of Cellulose Fiber from Hibiscus vitifolius Plant Stalk for Polymer Composites	15
Industrial Hemp—an Old but Versatile Bast Fiber Crop	15
Coloration of Cotton and Wool Fabric by Using Bio-Based Red Beetroot (Beta Vulgaris L.)	15
Alkali Treatment Influence on Characterization of Setaria Italic (Foxtail Millet) Fiber Reinforced Polymer Composites Using Vacuum Bagging	15
An Experimental Study of Physical, Mechanical and Morphological Properties of Alkali Treated Moringa/areca Based Natural Fiber Hybrid Composites	15
Production and Characterization of Pulp and Nanofibrillated Cellulose from Selected Tropical Plants	15
Multifunctional Linen Fabric Obtained through Finishing with Chitosan-gelatin Microcapsules Loaded with Cinnamon Oil	15
Characterization Studies on New Natural Cellulosic Fiber Extracted from the Stem of Ageratina Adenophora Plant	15
Natural Bio-Source Materials for Green Dyeing of Cellulosic Yarns	14
Experimentation and Prediction Analysis on the Mechanical Performance of Fish Scale and Coconut Shell Powder-Based Composites	14
Application of Sustainable Textile Finishing Using Natural Biomolecules	14
Effect of Thickness and Infill Density on Acoustic Performance of 3D Printed Panels made of Natural Fiber Reinforced Composites	14
Investigation of Physical, Mechanical Properties of Treated Date Palm Fibre and Kenaf Fibre Reinforced Epoxy Hybrid Composites	14
A Review of Fibre Flax Harvesting: Conditions, Technologies, Processes and Machines	14
Revealing Genomic Footprints of Selection for Fiber and Production Traits in Three Indian Sheep Breeds	14
Effect of Alkali Metals and Alkaline Earth Metals Hydroxides on the Structure of Wool Fibers	14
Effect of Structural Changes on the Cotton Composite Yarn Properties	14
Experimental Investigation on Thermal and Transport Properties of Indian Almond – Kenaf Hybrid Composites for Construction Applications	14
Effect of Fiber Loading and Orientation on Mechanical and Thermal Properties of Jute-Polyester Laminated Composite	14

Animal fiber characterization and fiber loading effect on mechanical behaviors of sheep wool fiber reinforced polyester composites	14
Effects of Salinity Stress on Some Growth, Physiological, and Biochemical Parameters in Cotton (Gossypium hirsutum L.) Germplasm	14
A Review on Chicken Feather Fiber (CFF) and its application in Composites	14
Synthesis and Application of Fluorine-free Environment-friendly Stearic Acid-based Oil and Water Repellent for Cotton Fabric	14
The Use of Modified Fenton Chemistry for Reducing Energy Consumption during Dyeing of Wool and Nylon 6 Fabrics with Acid Dyes	14
Electrospinning of Eucalyptus Cellulose Nano Fiber and Improving Its Properties by Doping Nano Materials	13
Thermal Analysis and Kinetic Study of Indian Almond Leaf by Model-Free Methods	13
Lignocellulosic Natural Fiber Reinforced Bisphenol F Epoxy Based Bio-composites: Characterization of Mechanical Electrical Performance	13
Characterization of a Novel Natural Filler from Sirisha Bark	13
Physical and Combustion Indices of Thermally Treated Cornhusk and Sawdust Briquettes for Heating Applications in Nigeria	13
Mechanical and Vibrational Property Evaluation of Banana Fiber Epoxy Sandwich Composite with Steel Wire Mesh Core	13
Banana Fiber Degumming by Alkali Treatment and Ultrasonic Methods	13
A Novel Flexible Green Composite with Sisal and Natural Rubber: Investigation under Low-Velocity Impact	13
Optimization of Alkali Treatment Process Parameters for Kenaf Fiber: Experiments Design	13
Study on Thermal Comfort Properties of Eri Silk Knitted Fabrics for Sportswear Application	13
Performance Evaluation of Mechanical Properties of Nanofiller Reinforced Jute-Kevlar Hybrid Composite	13
Giant Reed ( Arundo donax L.) Fiber Extraction and Characterization for Its Use in Polymer Composites	13
Studies on UV Protection and Antimicrobial Functionality of Textiles	13
Characteristics of cellulose fibers from Opuntia ficus indica cladodes and its use as reinforcement for PET based composites	13
Optimization of Coating Process Conditions for Denim Fabrics by Taguchi Method and Grey Relational Analysis	13
Green and Sustainable Method to Improve Fixation of a Natural Functional Dye onto Cotton Fabric Using Cationic Dye-Fixing Agent/D5 Microemulsion	13
Interfacial Studies of Natural Fiber-Reinforced Particulate Thermoplastic Composites and Their Mechanical Properties	13
Polylactic Acid (PLA) Reinforced with Date Palm Sheath Fiber Bio-Composites: Evaluation of Fiber Density, Geometry, and Content on the Physical and Mechanical Properties	13
Preparation and Characterization of Graphene Oxide-based Natural Hybrids Containing Alfa Fibers or Microcrystalline Cellulose	13
Bacterial cellulose-A potential material for sustainable eco-friendly fashion products	13
Genetic Diversity and Phylogenetic Analyses of Turkish Cotton (Gossypium hirsutumL.) Lines using ISSR Markers and ChloroplasttrnL-FRegions	13
Properties of Frost-Retted Hemp Fibers for the Reinforcement of Composites	13
Genetic Variation Studies of Ionic and within Boll Yield Components in Cotton (Gossypium Hirsutum L.) Under Salt Stress	13
A Review of Flax Fiber Reinforced Thermoset Polymer Composites: Thermal-Physical Properties, Improvements and Application	13
Use of Alpinia Officinarum Rhizome in Textile Dyeing and Gaining Simultaneous Antibacterial Properties	13
Fiber morphology, chemical composition, and properties of kraft pulping handsheet made from four Thailand bamboo species	12
Mechanical and Morphological Characteristics Study of Chemically Treated Banana Fiber Reinforced Phenolic Resin Composite with Vajram Resin	12
High-Efficiency and Durable Flame Retardant Cotton Fabric with Good Physical and Mechanical Properties by Layer-by-Layer Assembly Polyethylenimine/Phytic Acid Coating	12
Study of Thermal Insulation Performance of Layered Jute Nonwoven: A Sustainable Material	12
Tribological Behavior of Micro Coir Filler Reinforced Polymer Composite under Dry, Wet, and Heated Contact Condition	12
Mechanical and Acoustic properties of Bagasse – Coconut Coir based Hybrid Reinforced Composites	12
Experimental Investigation of ABS Matrix and Cellulose Fiber Reinforced Polymer Composite Materials	12
Selection of Cotton Fabrics Using Pythagorean Fuzzy TOPSIS Approach	12
Banana pseudostem fiber: A critical review on fiber extraction, characterization, and surface modification	12
Development of Composites of PLA Filled with Different Amounts of Rice Husk Fibers for Fused Deposition Modeling	12
Woven Textiles Coated with Zinc Oxide Nanoparticles and Their Thermophysiological Comfort Properties	12
Micro Cellulose Grewia Optiva Fiber-reinforced Polymer Composites: Relationship between Structural and Mechanical Properties	12
Effect of Silane Coupling Agents on Cotton Fibre Finishing	12
Potential Use of Oil Palm Fronds for Papermaking and Application as Molded Pulp Trays for Fresh Product under Simulated Cold Chain Logistics	12
Development of Sustainable Jute/Epoxy Composite and Assessing the Effect of Rubber Crumb on Low Velocity Impact Response	12
Investigation of Static and Dynamic Mechanical Properties of Short Palmyra Palm Leaf Stalk Fiber (PPLSF) Reinforced Polymer Composites	12
Comprehensive Characterization of Date Palm Petiole Fiber Reinforced Epoxy Composites: Effect of Fiber Treatment and Loading on Various Properties	12
Statistical and Experimental Analysis of the Mechanical Properties of Flax Fibers	12
Suitability evaluation of untreated and surface-modified Eichhornia crassipes fibers for brake pad applications	12
Composite Filament Made from Post-used Styrofoam and Corn Husk Fiber for Fuse Deposition Modeling	12
Characterization of raw and alkali treated new cellulosic fiber from the rinds of Thespesia populnea plant	12
Synergy of Interlaminar Glass Fiber Hybridization on Mechanical and Dynamic Characteristics of Jute and Flax Fabric Reinforced Epoxy Composites	12
A Novel Approach towards Removal of Lipid Barrier from Wool Fibers’ Surface Using Thermophilic Lipase	12
Utilization of Municipal Solid Waste Incineration Fly Ash for Non-Bearing Masonry Units Containing Coconut Fiber	12
A Review on the Mechanical Properties of Natural Fiber Reinforced Compressed Earth Blocks	11
The Influence of Chemical and Thermal Treatments on the Diss Fiber Hygroscopic Behaviors	11
Investigation of the Characteristic and Sound Absorption Properties of a New Cellulose-based Fiber from Alcea rose L. Plant	11
Sustainable Antimicrobial and Antioxidant Finishing and Natural Dyeing Properties of Wool Yarn Treated with Chitosan-poly(amidoamine) Dendrimer Hybrid as a Biomordant	11
Characterization Studies on New Cellulosic Fiber Extracted from Leucaena Leucocephala Tree	11
Characterization of Surface Modified Nettle Fibers for Composite Reinforcement	11
INVESTIGATION ON PHYSICO-CHEMICAL, MECHANICAL AND THERMAL PROPERTIES OF EXTRACTED NOVEL PINUS ROXBURGHII FIBER	11
Cotton Agriculture in Turkey and Worldwide Economic Impacts of Turkish Cotton	11
Extraction and Characterization of Natural Fiber from Furcraea Foetida Leaves as an Alternative Material for Textile Applications	11
Effect of stacking sequence on mechanical and moisture absorption properties of abaca-kenaf-carbon fiber reinforced hybrid composites	11
Quantitatively Investigating the Effects of Fiber Parameters on Tensile and Flexural Response of Flax/Epoxy Biocomposites	11
Investigation of different denim fabrics with fabric touch tester and sensory evaluation	11
Preparation and Characterization of Cellulose Nanocrystals from Typha sp. as a Reinforcing Agent	11
A Review on Natural Plant Fiber Epoxy and Polyester Composites – Coating and Performances	11
Characterization of Textile Grade Novel Bauhinia Vahlii Fiber	11
Bleaching and Softening of Coir Fiber Using Averrhoa Bilimbi Extract	11
Tensile Behavior and Statistical Analysis of Washingtonia Filifera Fibers as Potential Reinforcement for Industrial Polymer Biocomposites	11
Optimization of process parameters on color strength and antimicrobial activities of cotton fabric dyed with Rubia cordifolia extract	11
Influence of Stacking Sequence on Mechanical and Thermal Characteristics of Banana-Pineapple Fiber Reinforced Epoxy Composites	11
Optimization and Extraction of Natural Dye from Tagetes Erecta and Dyeing of Cotton and Silk Fabric Using Banana (Musa Sp.) Pseudo Stem Sap	11
Mechanical, Modal and Harmonic Behavior Analysis of Jute and Hemp Fiber Reinforced Polymer Composite	11
Mechanical characterization of metal-composite laminates based on cellulosic kenaf and pineapple leaf fiber	11
Facile Single-step Preparation of Cellulose Nanofibers by TEMPO-mediated Oxidation and Their Nanocomposites	11
Bio-based Phytic Acid/chitosan and Polycarboxylic Acid for Eco-friendly Flame Retardant and Anti-crease of Cotton Fabric	11
Investigation of the Acoustic and Mechanical Properties of Homogenous and Hybrid Jute and Luffa Bio Composites	11
Effect of Non-Acidic Chemical Treatment of Kenaf Fiber on Physico Mechanical Properties of PLA Based Composites	10
Development of Kapok/Recycled-PET Blended Needle-Punched Thermal Waddings	10
Characterization of Secondary Structure of Pig Hair Fiber Using Fourier-transform Infrared Spectroscopy	10
Influence of Process Parameters on Properties of Hemp Woven Reinforcements for Composite Applications: Mechanical Properties, Bias-extension Tests and Fabric Forming	10
Effect of Fiber Length on Curing and Mechanical Behavior of Pineapple Leaf Fiber (PALF) Reinforced Natural Rubber Composites	10
The Use of Copper Ions and Tannic Acid to Enhance the UV Protection of Cotton Fabrics	10
Morphological, Microstructure, Tensile and Water-Sorption Characteristics of Surface Modified Kenaf Fibre for Sustainable Biocomposite Reinforcement	10
Broadening Color Shade Range of Rubia tinctorum L. Natural Colorants on Wool Fibers via Combination of Metal Mordants: Color Characteristics and Fastness Studies	10
Effect of Weave Structure on Comfort Property of Fabric	10
Wood-plastic from Pennisetum Purpureum Fibers and Recycled Low-density Polyethylene	10
Development of Activated Carbon from Pineapple Crown Wastes and Its Potential Use for Removal of Methylene Blue	10
The Current Status and Future Insight into the Production of Machine-washable Wool	10
An Effective Degumming Technology for Ramie Fibers Based on Microbial Coculture Strategy	10
Effects of Alkalization on Physical and Mechanical Properties of Biologically Degummed Okra Bast and Corn Husk Fibers	10
Evaluation of Physical, Mechanical, and Wear Properties of Jatropha Shell Powder Reinforced Epoxy Glass Fiber Composites	10
Investigation on the Sound Absorption Properties of Waste Green Tea Residues Covered by Woven Fabric	10