Journal of Coatings Technology and Research

Article	Citations
Binder-free conductive graphite coatings on polyimide substrates for applications in flexible electronics	164
The construction of hybrid wettability surface of bamboo based on parenchyma and sclerenchyma cells difference	53
Preparation and characterization of self-crosslinking acrylate emulsion modified by divinyl silane	51
Blue light excitable fluorescent green security ink for anticounterfeit application	49
Multifunctional cotton fabrics with novel antibacterial coatings based on chitosan nanocapsules and polyacrylate	48
Waviness analysis of glossy surfaces based on deformation of a light source reflection	43
Fabrication of superhydrophobic TA2 titanium alloy and preliminary assessment of its antifouling, self-cleaning, anti-icing, friction resistance, and corrosion resistance performance	43
Preparation and characterization of new antifouling coating based on alkyd paint modified with hydrophobic cationic biocide	40
Multi-detection method for the fast screening of bisphenol A diglycidyl ether conjugates in the can-coating material	39
Preparation and application of fluorine-containing acrylate emulsion in two-component waterborne polyurethane coatings	38
Advancing renewable functional coatings: sustainable solutions for modern material challenges	33
Mechanical-induced functionalization of graphene with sodium carboxymethyl cellulose toward enhancing anticorrosion performance of waterborne epoxy coatings	31
A review of recent development in preparation and modification of waterborne polyurethanes and their application in waterborne inks for plastic packaging printing	29
Irradiation-cured graphene composite films: a comparison between UV and EB curing	29
Quaternary ammonium antimicrobial agents and their application in antifouling coatings: a review	26
The preparation and study of functionalized graphene oxide/self-healing waterborne polyurethane composites	24
A study on the preparation of passivating surface using bi-layer of nanostructured ZnO and silane functionalized polymer: an alternate option to chromate passivating coating	24
An A2 + CB2 approach to the synthesis of hyperbranched polyester polyol and application in PU coatings	23
Development of EPDM-based polymer nanocomposite barrier coating for radioactive waste storage containers	23
Preparation method, microwave operating conditions, and heating mechanism interpretation of a microwave-sensitive coating for surface deicing of engineering structures	21
An investigation on the biological and corrosion response of PEI coating on the AZ31 alloy	21
Utilization of waste shellac resin to synthesize thermally stable crosslinked shellac nanoparticles via wet grinding technique for high-barrier packaging	20
Preparation of high-hardness silicon-based antireflective optical coatings at low temperature and without calcination	19
Biofilm inhibiting nanocomposite coatings—a promising alternative to combat surgical site infections	19
Synthesis of a curing agent containing trifunctional epoxy groups for powder coatings and its curing reaction kinetics	18

Photopolymerization kinetics of UV-curable polyester powder coatings containing urethane methacrylate reactive diluents	18
Synthesis of rosin-modified epoxy soybean oil acrylates and its UV curing properties	18
Polysilazane/micro-arc oxidation pore-sealing composite coatings to protect magnesium alloys from corrosion	18
Wear, thermal, corrosion, and physical properties of novel UV-cured nanocomposite hybrid coatings with fluorine-containing silica networks	18
Superhydrophilic multifunctional antifogging coatings based on triethoxysilyl-terminated poly(N-vinylpyrrolidone)	17
Zein–natamycin functional films with ethylene adsorption and fungi stasis for active food packaging applications	17
Comprehensive study on mechanical and ignition properties of newly synthesized lanthanide complexes for flame retardant paint additives	16
A systematic review on polymer-based superhydrophobic coating for preventing biofouling menace	16
Synthesis of phosphazene modifiers to improve the fire resistance of epoxy coating materials	16
Solvent effect on PMMA coating adhesion to soda lime silicate glass	15
Environmentally friendly zwitterionic fluorocarbon surfactant for high-efficiency emulsion polymerization of fluoropolymers	15
Emerging applications and trends in atomic layer deposition nano-coatings	15
Using electrically conductive polyaniline/polyvinyl alcohol hydrogel electrodes to perform electrodeposition of polysaccharides	14
Tuning the mechanical properties of epoxy-acrylate core–shell nanostructured film via epoxy concentration in the core layer	14
Study of the effect of zinc oxide on the antimicrobial properties and durability of geopolymer coatings	13
Valorization of jackfruit seed and pomelo peel for coating on wrapping paper for active food packaging	13
Preparation of transparent superamphiphobic coating by rationally designed rough structure	13
Superhydrophobic route of fabricating antireflective, self-cleaning, and durable coatings for solar cell applications	13
Preparation and characterization of hydrogen-containing silicone oil-modified polyurethane/Al composite coating with low-infrared emissivity	13
Insights into the corrosion mitigation efficacy of modified SiO2/GO-based epoxy composite coatings for aluminum alloy AA6061 in marine applications	13
Enhancing the durability of fire-retardant epoxy coatings through an eco-friendly self-stratification approach	13
Development of bio-based polyester-urethane-acrylate (PUA) from citric acid for UV-curable coatings	13
Preparation and characterization of organic–inorganic hybrid coatings for improving the insulation properties of electrical steel	13
Regulate solar irradiation with smart microshutters	13
One-dimensional structured fillers as novel carriers for self-healing coatings: a comprehensive review	13
Recent advances in hyperbranched alkyd resins	13
Advancing nanomaterial applications in marine antifouling coatings through innovation risk awareness and long-term vision	13
Styrene and BPO poly (urea-melamine-formaldehyde) microcapsules prepared via in situ polymerization to promote the self-healing properties of epoxy composites	12
Study on the production of edible coatings based on chitosan and inclusion complex of rutin with hydroxypropyl-β-cyclodextrin for avocado preservation	12
A parametric distribution model of electrostatic spray rotating bell and application for automobile painting	12
Waterborne thin organic coating as a base coat for color coatings: effect of zinc alloy on properties of coated panels	12
Development of nano–magnesium oxide modified hybrid resin system for antimicrobial coating	12
Sucrose-derived carbon membranes for sustainable water desalination	12
Optimizing the annealing process of sol–gel hybrid coating technology for corrosion barrier protection of Al	12
Nano-silica-containing acrylic polyurethane and acrylic-polyester hybrid polyurethane coatings for direct-to-metal (DTM) coating applications – a comparative study	11
Thermal stability of cyanate ester modified silicone rubber as matrix of heat-resistant composite coatings	11
Influence of dwell time and temperature on the measured gloss of printed UV-inks containing aluminum pigments	11
Optimization of wetting properties based on polymer–inorganic–nonsolvent hybrid materials	11
Detection of production relevant deviations in paint sprays	11
Electrochemical, spectroscopic and microscopic investigation of PEDOT coated nickel plate from aqueous micellar solutions and its anti-corrosion performances	11
Weathering of historical paints based on linseed oil and plant resins	11
Polyacrylic acid (PAA)/Zn2+ complex films fabricated on steel substrate via one-step assembly for corrosion protection	11
Wash fastness properties of conductive polymer-coated textiles for wearable electronics: a critical review	10
Photocatalytic superhydrophobic SH-ZnO-PDMS-coated fabric for efficiency self-cleaning and oily water separation	10
Organic fluorophores in developing latent fingerprints: an up-to-date review	10
Polyphenol tannic acid fixes iron ions on organophosphorus–nitrogen grafted carbon spheres surface for enhancing the fire resistance of waterborne epoxy coatings	10
Preparation and performance study of the self-embrittle composite coatings for radioactive decontamination of surface layer of various materials	10
Preparation of styrene-modified polyacrylate emulsion and its application in water-repellent finishing of polyester fabrics	10
Layered double hydroxides (LDHs) for coating applications	10
Development of an intumescent geopolymer coating on steel substrates	10

Marine biofouling resistance rating using image analysis	10
Synthesis and characterization of porous TiO2 and its application in hydrophilic coatings	10
Understanding the activation of low– to medium–polarity bentonite as a rheological modifier in organic coatings	10
Synthesis and property of room-temperature self-healable cathodic electrophoretic deposition coatings based on cationic waterborne polyurethane	10
Flexible piezoelectric coatings on textiles for energy harvesting and autonomous sensing applications: a review	10
Synthesis and characterization of Cerbera odollam (sea mango) oil-based alkyd resin as binder for surface coating paint and matrix material for reinforced polymer composites	10
Synthesis of vanillin-based UV curable polyurethane dispersions for wood coating applications	10
The effect of different materials on the coating of baker’s yeast (Saccharomyces cerevisiae) with the fluidized bed method	9
Greener route towards preparation of plant-based antifungal fatliquor for eco-conscious application during leather making	9
Biodegradable polymer-based coatings for controlled and slow-release fertilizers	9
Antibacterial noncytotoxic chitosan coatings on polytetrafluoroethylene films by plasma grafting for medical device applications	9
RAFT copolymerization of amphiphilic poly(ethyl acrylate)-b-acrylic acid as a wetting and dispersing agent for aqueous strippable decontamination coatings	9
Correction: Enhancing solar panel efficiency with a multifunctional nanocomposite coating: self-cleaning and cooling properties of ZnO, SiO2, and chlorophyll integration	9
Study on the ultraviolet absorbing properties of cotton fabric finished with boron and nitrogen co-doped carbon dots	9
Superhydrophobicity as a key factor in improving slurry erosion resistance of antifouling coatings	9
Phytic acid oligomers as bio-based crosslinkers for epoxy and polyol resins	9
Advanced poly(aniline-aminosalicylic acid) nanofiber functionalized with modified GO environment friendly coatings on steel surfaces with water resistance and long-term active anticorrosion performanc	9
Antibacterial and UV-blocking properties of polycaprolactone-triol-based polyurethane films embedded with natural oily extracts	9
Water resistance study on fast UV-curable polybutadiene coatings crosslinked by multifunctional mercaptan in different aqueous conditions	8
Traditional science in pigments and recipe of painting woodcarving in medieval Assam, India	8
Anticorrosion properties of modified basalt powder/epoxy resin coating	8
Robotic painting: mimicking human applicators	8
Preparation of UV-curable waterborne poly(thiourethane-urethane) acrylate based on thiol-click chemistry	8
Gangue geopolymer to strength fire resistance of intumescent waterborne coating	8
Preparation of UV-curable nano-SiO2/ acrylate coatings modified by P-containing LEPB and their applications on plywood	8
Anticorrosion healing properties of epoxy coating with poly(urea–formaldehyde) microcapsules encapsulated linseed oil and benzotriazole	8
Effect of layer thickness on the thermoelectric properties of fully sprayed poly(3-hexylthiophene-2,5-diyl) thin films doped with chloroauric acid	8
Comparative review of bioinspired bactericidal surfaces for uses in space exploration	8
CoaST Maritime Test Centre: an investigation of biofouling propensity	8
Preparation and properties of antibacterial styrene-acrylic emulsion containing thiazole structure and its application as coating	8
Determination of the wetting capacity of sulfated polysaccharide coatings from the red seaweed Gracilaria birdiae and evaluating the shelf-life quality of frozen shrimp Litopenaeus vannamei	8
VOCs contents and species of multiple-use housing refurbishment coatings in China	8
Numerical and experimental investigation on formation of the film for different die lip configurations in lithium-ion battery electrode slot-die coating	8
Fabrication of hydrophobic coatings on paper substrates using silicone oil impregnated silica: a promising sustainable packaging material	8
Polymeric aziridines as benign crosslinkers for water-based coating applications	8
Achieving simultaneous low infrared emissivity and improved mechanical properties of Al/epoxy resin composite coating	8
Engineering of new anti-biofilm phosphonium thin coatings onto polymeric films	8
Testing for biofilm release as a function of simulated ship speed using a calibrated water jet device	8
Preparation and properties of a novel coating based on bismaleimides via Michael addition reaction	7
Natural polyhydroxy resins in surface coatings: a review	7
Preparing self-cleaning superhydrophobic fiber@POSS garment fabric by UV-curing-induced high surface roughness	7
Polypyrrole-modified multi-functional coatings for improved electro-conductive, hydrophilic and flame-retardant properties of polyamide 66 textiles	7
Enhancing the colloidal stability of carboxylated styrene-acrylic latexes using anionic and nonionic polymerizable surfactants for architectural paints	7
Preparation and performance of light-cured antimicrobial coatings with acrylamide quaternary ammonium salt as antimicrobial agent	7
Preparation and tribological properties of MAO-PVA/PTFE self-lubricating composite coating on aluminum alloy surface	7
2-Mercaptobenzimidazole@carbon nanocages enable self-healing anticorrosion coatings	7
Investigation of the effect of fluorine and silane-containing monomers on waterborne hybrid (alkyd/styrene acrylic) latexes	7
Microencapsulation of corrosion inhibitors: a review	7
Impact of various Mg(OH)$$_{2}$$ morphologies on hydrophobicity, mechanical, and physical properties of polyurethane nanocomposite	7
Effects of latex and thickener polarities on rheology and phase stability of latex–HEUR mixtures	7
Preparation and properties of soybean protein isolate membrane reinforced by amino-modified ZnONPs and trimethylol propane triglycidyl ether	7
Corrosion resistance of functionalized carbon nanotubes enhanced epoxy coatings on sintered NdFeB magnets	7
Novel eco-friendly self-healing nanozirconium vanadate@alginate hybrid microcapsules for corrosion prevention	7
Improving the performance of biobased polyurethane dispersion by the incorporation of photo-crosslinkable coumarin	7
Nano-films as a sustainable, biopolymer-based solution for post-harvest losses and improved shelf life of horticultural crops: a comprehensive review	7
Fabrication of high selectivity and high flux reverse osmosis membranes	7
Facile synthesis of BaSO4@SiO2@TiO2 composites and its coating mechanism analysis	7
Effect of plasma treatment on the tribological and adhesion performance of a polymer coating deposited on different metallic substrates	7
The effects of flow rate on impedance measurements of marine coatings using a rotating cylinder electrode	7
Comparison of new hydrazone epoxy coatings and their nanocomposite derivatives	6
In situ grown gluconate-containing CaAl-LDH/organic coating for steel corrosion protection	6
Green banana starch edible coating with plasticizers for shelf-life extension of grapes (Vitis vinifera)	6
The effect of glass transition temperature of commercial epoxy–amine coatings on their performance in marine environment	6
Advance of design and application in self-healing anticorrosive coating: a review	6
Relationships between crystallization behavior and application properties of chemically coupled PAI-PTFE coatings	6
Thin liquid films on a rotary bell atomizer in surface-following coordinates	6
Corrosion behavior and antibacterial adhesion of superhydrophobic composite coatings on AZ31 magnesium alloys	6
Preparation of underwater superoleophobic SiO2/CS/PVA coating on 304 stainless-steel mesh with excellent oil–water separation performance and stability	6
Review on thermochromic materials: development, characterization, and applications	6
Effects of lanthanum hypophosphite on fire protection properties of intumescent fire-retardant coating for steel structure	6
Study on the flame retardancy of reactive PU modified in situ using ammonium polyphosphate	6
Synthesis and properties of self-matte polyurethane emulsions with high bio-based content	6
Pistachio shell-derived carbon dots and their screen-printing formulation for anticounterfeiting applications	6
Review of surface engineering through wettability control: innovations, sustainability, and interdisciplinary impact	6
Flame-retardant waterborne polyurethane based on the synergistic effect of HGB and DOPO derivatives	6
Effect of boron nitride modified by sodium tripolyphosphate on the corrosion resistance of waterborne epoxy coating	6
Insights into the influence mechanism of alkali-soluble resins (ASRs) with different acidity and the synergistic improvement of dryness and adhesion of water-based ink	6
Preparation of active–passive anticorrosion antistatic epoxy nanocomposite coatings loaded with CeO2, CeO2@C, and CHS particles	6
Development of novel gallic acid- and cellulose acetate-coated paper as pH-responsive oxygen indicator for intelligent food packaging	6
Feasible estimation of weathering stability for free film acrylic coatings via dynamic mechanical analysis as the sole characterization method	6

Amphiphilic marine coating systems of self-stratified PDMS-PEG surfaces with an epoxy-polyurethane matrix	6
Enhancing uniformity in large-area slot die coating of low-viscosity perovskite ink	6
Development of near-infrared reflective inorganic pigment dispersions in the continuous phase of solvent-binder medium	6
Relative permeability of barrier dispersion coatings applied on paper-based materials; mathematical modeling and experimental validation	6
Enhanced wear resistance of epoxy coatings on steel using graphene oxide	6
Titanium dioxide and silver nanoparticles applied in mineral paints for outdoor and indoor environments	6
Anticorrosive properties of the double-layer PANI-(graphene oxide)/epoxy coating in protecting carbon steel in saltwater	6
Siloxane coating with epoxy modification: optimization of adhesion to improve steel corrosion protection	6
Correction to: Enhancing antibacterial and anticorrosion properties of 304 stainless steel surfaces: a multi-modification approach based on DA/PEI/SiO2/AMPs	6
Epoxidized technical Kraft lignin as a particulate resin component for high-performance anticorrosive coatings	5
Facile preparation of particle-free hybrid amine silver ink with synergistic effect for low-resistivity flexible films	5
Study on corrosion resistance of titanium dioxide coating doped with PTFE on stainless steel surface	5
Toward a new generation of fertilizers with the approach of controlled-release fertilizers: a review	5
A facile in-situ approach for the synthesis of polyaniline based fiber composites and their electrochemical study for supercapacitor application	5
The development of wear-resistant composite coatings onto LLDPE substrate for tribological purposes	5
Cyclodextrin-based corrosion inhibitor carrier in a polymer-network	5
Synthesis of xylitol-based hyperbranched polyurethane acrylate and its application in self-matting acrylate coatings	5
Improving the properties of alkyd polyol-based waterborne polyurethane-amino baking films and coatings by castor oil as branched flexible oligomer	5
Recent developments in the anti-graffiti coatings: an attentive review	5
A water-based flame-retardant coating with cenospheres	5
Influence of chain length of organic modifiers in hydrophobization process on epoxy resin properties	5
Intumescent alkali silicate and geopolymer coatings against hydrocarbon fires	5
Epoxy-lignite composite coated controlled-release fertilizers: formulation and characterization	5
Effect of carboxyl on wettability and anti-fingerprint capacity of transparent chitin nanofiber coatings modified using fluorosilane	5
Study on a new prospective coating for improving corrosion resistance of magnesium alloy stents with deformation	5
Mechanical, thermal, and surface properties of fusion-bonded epoxy nanocomposite coatings	5
Phase separation in Michael addition curable coatings to enhance flexibility and adhesion robustness	5
Effect of microstructure on cracking of films cast on soft substrates	5
Fabrication of multifunctional smart polyester fabric via electrochemical deposition of ZnO nano-/microhierarchical structures	5
Evaluation of the food safety of wood finishes	5
Advances in emerging hydrogel fouling-release coatings for marine applications	5
Application of cellulose nitrate nanoparticles as binder in waterborne wood coatings and their additional use in debonding on demand	5
Effect of titania, barite, and kaolinite fillers on char layer formation in water-based intumescent fire-retardant coatings	5
Antimicrobial sol–gel coating: a review	5
Engineering APTES-modified Fe3O4–GO hybrid fillers for enhanced wear and corrosion resistance in epoxy pipeline coatings	5
Micrometric array integrated with slippery liquid-infused porous surface for improved anti-icing durability	5
Correction: Binder-free conductive graphite coatings on polyimide substrates for applications in flexible electronics	5
Investigation of effect of type of pigment/extender on the stability of high pigment volume concentration water-based architectural paint	5
Synthesis of nonionic polyacrylate emulsions: coatings for digital inkjet printing	5
Synthesis of water-based latexes using siloxane-derived surfactants and investigation of their use in pigment printing applications	5
Specific, nondestructive, and durable adhesion primer for polyolefins	5
A char stratification approach to characterization and quantitative thermal insulation performance of hydrocarbon intumescent coatings	5
Investigation on the preparation of a highly water-resistant emulsion coating for paper-based packaging materials	5
Morphological and antimicrobial studies of chitosan/poly(vinyl alcohol)/acyl chloride terminated hyperbranched polyester chemical crosslinked blends	5
Corrosion protection ability of hydrophobic zinc based coordination polymers on mild steel surface	5
Visualizing latex film formation using freeze-drying and scanning electron microscopy	5
Properties evaluation of double silane system compound gel as a protective coating on concrete	5
Enhancing antibacterial and anticorrosion properties of 304 stainless steel surfaces: a multi-modification approach based on DA/PEI/SiO2/AMPs	5
The study of fire-retardant properties of intumescent PVC-based materials containing various types of expandable graphite	4
Durable wear-resistant and antislip epoxy-EPU nanocomposites enabled by silane-modified graphene oxide for sports fields	4
Wet coating of calcite with silica nanoparticles in CO2 environment	4
A Python tool for predicting optimal solvent blends based on Hansen solubility parameters	4
Preparation and properties of waterborne UV-curable epoxy soybean oil acrylate resin	4
MXene-bio composite coatings for advanced sustainable fire retardancy at surfaces and interfaces	4
Recent progress of zeolitic imidazolate frameworks (ZIFs) in superhydrophobic and anticorrosive coatings for metals and their alloys	4
Nanoceramic surface coating on thermoplastic polyurethane-coated fabric for enhanced UV and weather resistance	4
Dual-responsive wettability of poly o-toluidine nanofiber coating fabricated by interfacial polymerization	4
Emulsion polymerization process: effects of particle nucleation mechanism on properties of acrylic-styrene latex	4
Nanocontainer-based self-healing coatings: advancements, applications, and future directions in anticorrosion technology: a short review	4
The preparation of hydrophobic hybrid film coatings from siloxane-modified polyacrylate associated with nano-fumed silica and organo-modified clay	4
Janus membrane with asymmetric wettability and photothermal conversion for solar-driven interfacial water evaporation	4
Effect of modified phosphorus slag micro-fillers on the mechanical and weathering properties of organic waterborne coatings	4
Multinozzle electrospray method for high-throughput and uniform coating: Application of superhydrophobic coating	4
Carboxymethyl chitosan-silver: a novel material to augment mechanical properties and antimicrobial efficacy in wood coatings	4
Synergistic effects of zinc oxide and iron oxide photoinitiators for whole spectrum utilization of UV–Vis light in photo-curable coatings	4
Infrared-responsive shape memory self-healing and fluorescent damage-indication anti-corrosion coatings for aluminum alloys	4
Preparation of polyurethane coating formulation based on dihydropyridine derivatives as an insecticide and antifungal additives for surface coating applications	4
Study of SiO2 aerogel/CNTs photothermal de-icing coating for wind turbine blades	4
A comprehensive review on coating techniques to suppress the dendrites issue and improve the performance of lithium-ion batteries	4
Temporal variations of surface roughness and thickness of polymer-coated quartz sand	4
Facile fabrication of superhydrophobic nanocomposites coating materials using nanoemulsion polymerization technique and its application for protecting the petroleum carbon steel pipelines	4
Synthesis of novel one-component photoinitiators based on thioxanthone derivatives	4
Evaluating the easy-to-clean performance of UV-durable hydrophobic coatings for sensor signal enhancement of autonomous vehicles under fouling conditions	4
The effect of reactive diluents on curing of epoxy resins and properties of the cured epoxy coatings	4
Reduction in edge beading defects using two-axis spin coating technology: an analytical, numerical, and experimental study	4
Suppression of MgO/CaCO3 mixed fouling through robust hydrophobic PTFE coatings	4
Inclusion complex-based multifunctional polyurethane antibacterial coatings with excellent mechanical and thermal properties	4
Dual-curable coatings obtained from multi-functional non-isocyanate polyurethane oligomers	4
Overview on progress in polysaccharides and aliphatic polyesters as coating of water-soluble fertilizers	4
Self-cleaning coating wettability on dynamic characteristics of dust in condensing state	4
Flame retardancy of acrylic emulsion resin intumescent coatings added with alkaline lignin on plywood	4
Advancements in pigment dispersion technologies: high-speed dispersers, bead mills, and ultrasonic cavitation for enhanced coating performance	4
Recent developments in phosphorous-containing bio-based flame-retardant (FR) materials for coatings: an attentive review	4
Polyurethane prepolymers: an efficient dispersant core for sublimation inkjet inks	4
Modification of organofluorosilicone styrene–acrylate emulsions with lignin participation and characterization of their properties	4
Recent development advances in bio-based powder coatings: a review	4
The nano building blocks approach for modification of surface properties of nanocomposite inorganic–organic films	4
Graphene-modified hybrid coating for improving the atomic oxygen erosion resistance of Kapton	4
Synthesis and purification of carbon dots from fluorescent precursors as colorant for fluorescent ink	4
NH4HCO3 as additive for fabrication of thin film nanocomposite membrane with enhanced permeability	4
Challenging toxic tin catalysts in polyurethane coatings through serendipity	3
Preparation of hydrophilic modified ZIF-8 and its application in the preparation of nanocomposite matrix reverse osmosis membrane with improved permeation performance	3
Development of an epoxy-based self-intumescent fire protective coating containing an appropriate mass ratio of APP and Cu2O	3
Improving fungal decay resistance of solvent and waterborne polyurethane-coated wood by free and microencapsulated thyme essential oil	3
PVA/PEGDA microgels loaded with L-cysteine for corrosion inhibition coating on fragile bronze	3