Journal of Coatings Technology and Research

Papers
(The TQCC of Journal of Coatings Technology and Research is 5. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-09-01 to 2025-09-01.)
ArticleCitations
Binder-free conductive graphite coatings on polyimide substrates for applications in flexible electronics144
The construction of hybrid wettability surface of bamboo based on parenchyma and sclerenchyma cells difference141
Multi-detection method for the fast screening of bisphenol A diglycidyl ether conjugates in the can-coating material51
Mechanical-induced functionalization of graphene with sodium carboxymethyl cellulose toward enhancing anticorrosion performance of waterborne epoxy coatings42
Synthesis of silicone-acrylic-modified high-ortho novolac resin with enhanced thermal resistance and surface coating properties41
Waviness analysis of glossy surfaces based on deformation of a light source reflection39
Fabrication of superhydrophobic TA2 titanium alloy and preliminary assessment of its antifouling, self-cleaning, anti-icing, friction resistance, and corrosion resistance performance37
A review of recent development in preparation and modification of waterborne polyurethanes and their application in waterborne inks for plastic packaging printing35
Preparation and characterization of new antifouling coating based on alkyd paint modified with hydrophobic cationic biocide35
Multifunctional cotton fabrics with novel antibacterial coatings based on chitosan nanocapsules and polyacrylate31
Preparation and application of fluorine-containing acrylate emulsion in two-component waterborne polyurethane coatings29
Preparation and characterization of self-crosslinking acrylate emulsion modified by divinyl silane28
Blue light excitable fluorescent green security ink for anticounterfeit application27
Irradiation-cured graphene composite films: a comparison between UV and EB curing26
Quaternary ammonium antimicrobial agents and their application in antifouling coatings: a review25
Effect of siloxane chain length on thermal, mechanical, and chemical characteristics of UV (ultraviolet)-curable epoxy acrylate coatings22
Wear, thermal, corrosion, and physical properties of novel UV-cured nanocomposite hybrid coatings with fluorine-containing silica networks22
An investigation on the biological and corrosion response of PEI coating on the AZ31 alloy22
Preparation method, microwave operating conditions, and heating mechanism interpretation of a microwave-sensitive coating for surface deicing of engineering structures21
Polysilazane/micro-arc oxidation pore-sealing composite coatings to protect magnesium alloys from corrosion21
Development of EPDM-based polymer nanocomposite barrier coating for radioactive waste storage containers21
Comprehensive study on mechanical and ignition properties of newly synthesized lanthanide complexes for flame retardant paint additives20
Synthesis of a curing agent containing trifunctional epoxy groups for powder coatings and its curing reaction kinetics19
Phytic acid based novel optically transparent intumescent fire-retardant coating for protection of combustible substrates with retention of aesthetic appearance19
A study on the preparation of passivating surface using bi-layer of nanostructured ZnO and silane functionalized polymer: an alternate option to chromate passivating coating18
The preparation and study of functionalized graphene oxide/self-healing waterborne polyurethane composites17
Synthesis of phosphazene modifiers to improve the fire resistance of epoxy coating materials17
Zein–natamycin functional films with ethylene adsorption and fungi stasis for active food packaging applications17
An A2 + CB2 approach to the synthesis of hyperbranched polyester polyol and application in PU coatings17
Superhydrophilic multifunctional antifogging coatings based on triethoxysilyl-terminated poly(N-vinylpyrrolidone)16
Environmentally friendly zwitterionic fluorocarbon surfactant for high-efficiency emulsion polymerization of fluoropolymers16
Preparation of high-hardness silicon-based antireflective optical coatings at low temperature and without calcination16
Photopolymerization kinetics of UV-curable polyester powder coatings containing urethane methacrylate reactive diluents15
Biofilm inhibiting nanocomposite coatings—a promising alternative to combat surgical site infections15
A systematic review on polymer-based superhydrophobic coating for preventing biofouling menace15
Styrene and BPO poly (urea-melamine-formaldehyde) microcapsules prepared via in situ polymerization to promote the self-healing properties of epoxy composites14
Preparation and characterization of organic–inorganic hybrid coatings for improving the insulation properties of electrical steel14
Effects of surface fluorination on the dyeing of polycarbonate (PC) resin13
Preparation of transparent superamphiphobic coating by rationally designed rough structure13
Recent advances in hyperbranched alkyd resins13
Using electrically conductive polyaniline/polyvinyl alcohol hydrogel electrodes to perform electrodeposition of polysaccharides13
Development of nano–magnesium oxide modified hybrid resin system for antimicrobial coating13
Superhydrophobic route of fabricating antireflective, self-cleaning, and durable coatings for solar cell applications12
A parametric distribution model of electrostatic spray rotating bell and application for automobile painting12
Insights into the corrosion mitigation efficacy of modified SiO2/GO-based epoxy composite coatings for aluminum alloy AA6061 in marine applications12
One-dimensional structured fillers as novel carriers for self-healing coatings: a comprehensive review12
Tuning the mechanical properties of epoxy-acrylate core–shell nanostructured film via epoxy concentration in the core layer12
Study of the effect of zinc oxide on the antimicrobial properties and durability of geopolymer coatings12
Regulate solar irradiation with smart microshutters12
Sucrose-derived carbon membranes for sustainable water desalination12
Influence of dwell time and temperature on the measured gloss of printed UV-inks containing aluminum pigments11
Preparation and characterization of hydrogen-containing silicone oil-modified polyurethane/Al composite coating with low-infrared emissivity11
Weathering of historical paints based on linseed oil and plant resins11
Polyacrylic acid (PAA)/Zn2+ complex films fabricated on steel substrate via one-step assembly for corrosion protection11
Development of bio-based polyester-urethane-acrylate (PUA) from citric acid for UV-curable coatings11
Optimization of wetting properties based on polymer–inorganic–nonsolvent hybrid materials11
Enhancing the durability of fire-retardant epoxy coatings through an eco-friendly self-stratification approach11
Study on the production of edible coatings based on chitosan and inclusion complex of rutin with hydroxypropyl-β-cyclodextrin for avocado preservation11
Synthesis and characterization of Cerbera odollam (sea mango) oil-based alkyd resin as binder for surface coating paint and matrix material for reinforced polymer composites10
Thermal stability of cyanate ester modified silicone rubber as matrix of heat-resistant composite coatings10
Electrochemical, spectroscopic and microscopic investigation of PEDOT coated nickel plate from aqueous micellar solutions and its anti-corrosion performances10
Nano-silica-containing acrylic polyurethane and acrylic-polyester hybrid polyurethane coatings for direct-to-metal (DTM) coating applications – a comparative study10
Marine biofouling resistance rating using image analysis10
Detection of production relevant deviations in paint sprays10
The influence of methacrylic acid and urethane methacrylate on the film properties of hybrid urethane–acrylic latexes10
Photocatalytic superhydrophobic SH-ZnO-PDMS-coated fabric for efficiency self-cleaning and oily water separation10
Synthesis and property of room-temperature self-healable cathodic electrophoretic deposition coatings based on cationic waterborne polyurethane10
Flexible piezoelectric coatings on textiles for energy harvesting and autonomous sensing applications: a review9
Organic fluorophores in developing latent fingerprints: an up-to-date review9
Effect of layer thickness on the thermoelectric properties of fully sprayed poly(3-hexylthiophene-2,5-diyl) thin films doped with chloroauric acid9
Traditional science in pigments and recipe of painting woodcarving in medieval Assam, India9
Understanding the activation of low– to medium–polarity bentonite as a rheological modifier in organic coatings9
Layered double hydroxides (LDHs) for coating applications9
Preparation of UV-curable nano-SiO2/ acrylate coatings modified by P-containing LEPB and their applications on plywood9
Synthesis, analysis, and application of lactide-based polyester as coating with improved mechanical and rheological behavior9
Wash fastness properties of conductive polymer-coated textiles for wearable electronics: a critical review9
Preparation and performance study of the self-embrittle composite coatings for radioactive decontamination of surface layer of various materials9
Anticorrosion healing properties of epoxy coating with poly(urea–formaldehyde) microcapsules encapsulated linseed oil and benzotriazole9
Synthesis and characterization of porous TiO2 and its application in hydrophilic coatings9
Greener route towards preparation of plant-based antifungal fatliquor for eco-conscious application during leather making8
The effect of different materials on the coating of baker’s yeast (Saccharomyces cerevisiae) with the fluidized bed method8
Antibacterial noncytotoxic chitosan coatings on polytetrafluoroethylene films by plasma grafting for medical device applications8
Correction: Enhancing solar panel efficiency with a multifunctional nanocomposite coating: self-cleaning and cooling properties of ZnO, SiO2, and chlorophyll integration8
Advanced poly(aniline-aminosalicylic acid) nanofiber functionalized with modified GO environment friendly coatings on steel surfaces with water resistance and long-term active anticorrosion performanc8
Antibacterial and UV-blocking properties of polycaprolactone-triol-based polyurethane films embedded with natural oily extracts8
RAFT copolymerization of amphiphilic poly(ethyl acrylate)-b-acrylic acid as a wetting and dispersing agent for aqueous strippable decontamination coatings8
Study on the ultraviolet absorbing properties of cotton fabric finished with boron and nitrogen co-doped carbon dots8
Superhydrophobicity as a key factor in improving slurry erosion resistance of antifouling coatings8
Anticorrosion properties of modified basalt powder/epoxy resin coating8
Numerical and experimental investigation on formation of the film for different die lip configurations in lithium-ion battery electrode slot-die coating8
Synthesis of vanillin-based UV curable polyurethane dispersions for wood coating applications8
Fabrication of hydrophobic coatings on paper substrates using silicone oil impregnated silica: a promising sustainable packaging material8
Phytic acid oligomers as bio-based crosslinkers for epoxy and polyol resins8
Testing for biofilm release as a function of simulated ship speed using a calibrated water jet device7
Comparative review of bioinspired bactericidal surfaces for uses in space exploration7
Polypyrrole-modified multi-functional coatings for improved electro-conductive, hydrophilic and flame-retardant properties of polyamide 66 textiles7
Determination of the wetting capacity of sulfated polysaccharide coatings from the red seaweed Gracilaria birdiae and evaluating the shelf-life quality of frozen shrimp Litopenaeus vannamei7
CoaST Maritime Test Centre: an investigation of biofouling propensity7
Impact of various Mg(OH)$$_{2}$$ morphologies on hydrophobicity, mechanical, and physical properties of polyurethane nanocomposite7
Investigation of the effect of fluorine and silane-containing monomers on waterborne hybrid (alkyd/styrene acrylic) latexes7
Engineering of new anti-biofilm phosphonium thin coatings onto polymeric films7
Novel eco-friendly self-healing nanozirconium vanadate@alginate hybrid microcapsules for corrosion prevention7
Preparation and properties of antibacterial styrene-acrylic emulsion containing thiazole structure and its application as coating7
Preparing self-cleaning superhydrophobic fiber@POSS garment fabric by UV-curing-induced high surface roughness7
2-Mercaptobenzimidazole@carbon nanocages enable self-healing anticorrosion coatings7
Natural polyhydroxy resins in surface coatings: a review7
Polymeric aziridines as benign crosslinkers for water-based coating applications7
Robotic painting: mimicking human applicators7
Preparation and properties of a novel coating based on bismaleimides via Michael addition reaction7
Improving the performance of biobased polyurethane dispersion by the incorporation of photo-crosslinkable coumarin7
Preparation of UV-curable waterborne poly(thiourethane-urethane) acrylate based on thiol-click chemistry7
The effects of flow rate on impedance measurements of marine coatings using a rotating cylinder electrode7
Effects of latex and thickener polarities on rheology and phase stability of latex–HEUR mixtures7
Nano-films as a sustainable, biopolymer-based solution for post-harvest losses and improved shelf life of horticultural crops: a comprehensive review7
Gangue geopolymer to strength fire resistance of intumescent waterborne coating7
Super-hydrophobic coating prepared by mechanical milling method7
Facile synthesis of BaSO4@SiO2@TiO2 composites and its coating mechanism analysis6
Effect of humidity on curing of alkoxysilane-functionalized alkyd coatings6
Relationships between crystallization behavior and application properties of chemically coupled PAI-PTFE coatings6
Effect of plasma treatment on the tribological and adhesion performance of a polymer coating deposited on different metallic substrates6
Preparation and performance of light-cured antimicrobial coatings with acrylamide quaternary ammonium salt as antimicrobial agent6
Synthesis and properties of self-matte polyurethane emulsions with high bio-based content6
Effects of lanthanum hypophosphite on fire protection properties of intumescent fire-retardant coating for steel structure6
Development of near-infrared reflective inorganic pigment dispersions in the continuous phase of solvent-binder medium6
The effect of glass transition temperature of commercial epoxy–amine coatings on their performance in marine environment6
Preparation and tribological properties of MAO-PVA/PTFE self-lubricating composite coating on aluminum alloy surface6
Siloxane coating with epoxy modification: optimization of adhesion to improve steel corrosion protection6
Titanium dioxide and silver nanoparticles applied in mineral paints for outdoor and indoor environments6
Enhancing the colloidal stability of carboxylated styrene-acrylic latexes using anionic and nonionic polymerizable surfactants for architectural paints6
Advance of design and application in self-healing anticorrosive coating: a review6
Corrosion behavior and antibacterial adhesion of superhydrophobic composite coatings on AZ31 magnesium alloys6
Green banana starch edible coating with plasticizers for shelf-life extension of grapes (Vitis vinifera)6
Enhancing uniformity in large-area slot die coating of low-viscosity perovskite ink6
In situ grown gluconate-containing CaAl-LDH/organic coating for steel corrosion protection6
Pistachio shell-derived carbon dots and their screen-printing formulation for anticounterfeiting applications6
Effect of boron nitride modified by sodium tripolyphosphate on the corrosion resistance of waterborne epoxy coating6
Corrosion resistance of functionalized carbon nanotubes enhanced epoxy coatings on sintered NdFeB magnets6
Enhanced wear resistance of epoxy coatings on steel using graphene oxide6
Fabrication of high selectivity and high flux reverse osmosis membranes6
Flame-retardant waterborne polyurethane based on the synergistic effect of HGB and DOPO derivatives6
Relative permeability of barrier dispersion coatings applied on paper-based materials; mathematical modeling and experimental validation6
Anticorrosive properties of the double-layer PANI-(graphene oxide)/epoxy coating in protecting carbon steel in saltwater6
Preparation of active–passive anticorrosion antistatic epoxy nanocomposite coatings loaded with CeO2, CeO2@C, and CHS particles6
Preparation of underwater superoleophobic SiO2/CS/PVA coating on 304 stainless-steel mesh with excellent oil–water separation performance and stability6
Study on the flame retardancy of reactive PU modified in situ using ammonium polyphosphate6
Thin liquid films on a rotary bell atomizer in surface-following coordinates6
Amphiphilic marine coating systems of self-stratified PDMS-PEG surfaces with an epoxy-polyurethane matrix5
Properties evaluation of double silane system compound gel as a protective coating on concrete5
Feasible estimation of weathering stability for free film acrylic coatings via dynamic mechanical analysis as the sole characterization method5
Antimicrobial sol–gel coating: a review5
Effect of carboxyl on wettability and anti-fingerprint capacity of transparent chitin nanofiber coatings modified using fluorosilane5
A char stratification approach to characterization and quantitative thermal insulation performance of hydrocarbon intumescent coatings5
Tamarind shell tannin-doped hybrid sol–gel coatings on mild steel in acidic medium toward improved corrosion protection5
Intumescent alkali silicate and geopolymer coatings against hydrocarbon fires5
Specific, nondestructive, and durable adhesion primer for polyolefins5
Influence of chain length of organic modifiers in hydrophobization process on epoxy resin properties5
A facile in-situ approach for the synthesis of polyaniline based fiber composites and their electrochemical study for supercapacitor application5
Investigation of effect of type of pigment/extender on the stability of high pigment volume concentration water-based architectural paint5
Development of novel gallic acid- and cellulose acetate-coated paper as pH-responsive oxygen indicator for intelligent food packaging5
Synthesis of nonionic polyacrylate emulsions: coatings for digital inkjet printing5
Enhancing antibacterial and anticorrosion properties of 304 stainless steel surfaces: a multi-modification approach based on DA/PEI/SiO2/AMPs5
Recent developments in the anti-graffiti coatings: an attentive review5
Facile preparation of particle-free hybrid amine silver ink with synergistic effect for low-resistivity flexible films5
Advances in emerging hydrogel fouling-release coatings for marine applications5
Phase separation in Michael addition curable coatings to enhance flexibility and adhesion robustness5
Fabrication of multifunctional smart polyester fabric via electrochemical deposition of ZnO nano-/microhierarchical structures5
Correction to: Enhancing antibacterial and anticorrosion properties of 304 stainless steel surfaces: a multi-modification approach based on DA/PEI/SiO2/AMPs5
Robust surface with thermally stable hydrophobicity enabled by electrosprayed fluorinated SiO2 particles5
Review on thermochromic materials: development, characterization, and applications5
Investigation on the preparation of a highly water-resistant emulsion coating for paper-based packaging materials5
Study on a new prospective coating for improving corrosion resistance of magnesium alloy stents with deformation5
Morphological and antimicrobial studies of chitosan/poly(vinyl alcohol)/acyl chloride terminated hyperbranched polyester chemical crosslinked blends5
Mechanical, thermal, and surface properties of fusion-bonded epoxy nanocomposite coatings5
Micrometric array integrated with slippery liquid-infused porous surface for improved anti-icing durability5
Toward a new generation of fertilizers with the approach of controlled-release fertilizers: a review5
Cyclodextrin-based corrosion inhibitor carrier in a polymer-network5
0.11913704872131