Journal of Biomedical Materials Research Part B-Applied Biomaterials

Papers
(The TQCC of Journal of Biomedical Materials Research Part B-Applied Biomaterials is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-06-01 to 2025-06-01.)
ArticleCitations
165
Three‐Dimensionally Printed Biphasic Calcium Phosphate Ceramic Substrates as the Sole Inducer of Osteogenic Differentiation in Stromal Vascular Fraction Cells91
Tibial Baseplate Microstructure Governs High Cycle Fatigue Fracture In Vivo71
New polyoxazoline loaded patches for hemostasis in experimental liver resection57
Melt‐Blown Polypropylene Membrane Modification for Enhanced Hydrophilicity57
3D‐Printed composite scaffolds based on poly(ε‐caprolactone) filled with poly(glutamic acid)‐modified cellulose nanocrystals for improved bone tissue regeneration54
Mechanical properties, corrosion resistance, and anti‐adherence characterization of pure titanium fabricated by casting, milling, and selective laser melting50
Pre‐clinical evaluation of fretting‐corrosion at stem‐head and stem‐cement interfaces of hip implants using in vitro and in silico models50
Effect of rare earth oxide microparticles on mechanical, corrosion, antibacterial, and hemolytic behavior of Mg‐Hydroxyapatite composite for orthopedic applications – A preliminary in‐vitro46
Oxidized sodium alginate crosslinked silk fibroin composite scaffold for skin tissue engineering43
Novel Honeycomb Nanoclay Frameworks With Hemostatic and Antibacterial Properties40
Molecular Biomarkers for In Vitro Thrombogenicity Assessment of Medical Device Materials38
Cover Image38
Effects of aligned PLGA/SrCSH composite scaffolds on in vitro growth and osteogenic differentiation of human mesenchymal stem cells37
Determination of optimal concentration of vitamin E in polyethylene liners for producing minimal biological response to prosthetic wear debris36
Polycaprolactone Hybrid Scaffold Loaded With N,O‐Carboxymethyl Chitosan/Aldehyde Hyaluronic Acid/Hydroxyapatite Hydrogel for Bone Regeneration34
In vitro proliferation and differentiation of mouse spermatogonial stem cells in decellularized human placenta matrix33
Titania‐based sol–gel coatings with Ag, Ca‐P applied on titanium substrate developed for implantation30
Strontium‐loaded 3D intramedullary nail titanium implant for critical‐sized femoral defect in rabbits28
Issue Information28
In vivo biocompatibility of SrO and MgO doped brushite cements27
Issue Information27
Resin cement coating reverts the machining damage on the flexural fatigue strength of lithium disilicate glass‐ceramic26
Macrophage activation in response to shape memory polymer foam‐coated aneurysm occlusion devices26
Novel nano‐hydroxyapatite coating of additively manufactured three‐dimensional porous implants improves bone ingrowth and initial fixation26
In vitro elution characteristics of antibiotic‐loaded polymethylmethacrylate cement and a calcium sulfate bone substitute using staphylococci isolated from orthopedic implant‐associated infections25
Retinoic acid‐conjugated chitosan/manganese porphyrin ionic‐complex nanoparticles for improved T1 contrast MR imaging of hepatic fibrosis24
A facile chemical process to form an ultrathin hydroxyapatite layer with a customizable silver‐releasing function on a titanium implant24
Hybrid interpenetrating hydrogel network favoring the bidirectional migration of tenocytes for rotator cuff tendon regeneration24
Treatment of microvascular invasion in hepatocellular carcinoma with drug‐loaded nanocomposite platform under synergistic effect of magnetic field/near‐infrared light23
In vitro and in vivo effect of novel GA‐CSNPs loaded col‐fibrin nanocomposite scaffold on diabetic wound healing21
Exploring the biodegradability of candidate metallic intravascular stent materials using X‐ray microfocus computed tomography: An in vitro study21
Efficacy of collagen conduit wrapping with collagen fibers on nerve regeneration in sciatic nerve injury with partial transection: An experimental study in the rat model21
The biological and therapeutic assessment of a P(3HB‐co‐4HB)‐bioactive glass‐graphene composite biomaterial for tissue regeneration21
Photooxidation Cross‐Linked, Glutaraldehyde Cross‐Linked, or Enzyme and Hydrostatic Pressure Processed Decellularized Biomaterials for Cardiovascular Repair Do Not Affect Host Response in a Rat Right 20
In vivo evaluation of bone regeneration behavior of novel β‐tricalcium phosphate/layered double hydroxide nanocomposite granule as bone graft substitutes20
Analytical Modeling and Validation of Radial Stiffness in Zigzag‐Shaped Stents: Experimental and Numerical Approaches20
Sacrificial biomaterials in 3D fabrication of scaffolds for tissue engineering applications20
Issue Information19
Biological Coatings: Advanced Strategies Driving Multifunctionality and Clinical Potential in Dermal Substitutes19
Mechanical Characterization of Amniotic‐Based Scaffolds Containing Silk Fibroin and Sodium Alginate Nanofibers19
Periosteal expansion osteogenesis using a tubular dynamic frame device: An experimental study in rats18
Effect of Microporous Surface Zirconia on Mechanical Properties and Biological Behavior of Human Gingival Fibroblasts18
Biocompatible and Safe Decellularized Spinach With Antibacterial and Wound Healing Activity18
Emulgel based on fish skin collagen‐microalgae‐silver increased neovascularization and re‐epithelialization of full thickness burn in rats18
An injectable bioactive poly(γ‐glutamic acid) modified magnesium phosphate bone cement for bone regeneration17
The optimization of PLGA knitted mesh reinforced‐collagen/chitosan scaffold for the healing of full‐thickness skin defects17
Combined regenerative rehabilitation improves recovery following volumetric muscle loss injury in a rat model17
Fabrication of macroporous apatite bone cements for non‐load bearing orthopedic applications17
Calcium phosphate graphene and Ti3C2Tx MXene scaffolds with osteogenic and antibacterial properties17
Osteoblastic response to biomaterials surfaces: Extracellular matrix proteomic analysis17
Electrophoretically deposited titanium and its alloys in biomedical engineering: Recent progress and remaining challenges16
Mechanical alterations of electrospun poly(ϵ‐caprolactone) in response to convective thermobonding16
Microfluidics Based Particle and Droplet Generation for Gene and Drug Delivery Approaches16
Mechanically suitable and osteoinductive 3D‐printed composite scaffolds with hydroxyapatite nanoparticles having diverse morphologies for bone tissue engineering16
Sustained release of alpha‐methylacyl‐CoA racemase (AMACR) antibody‐conjugated and free doxorubicin from silica nanoparticles for prostate cancer cell growth inhibition16
Fabrication and histological evaluation of ant‐nest type porous carbonate apatite artificial bone using polyurethane foam as a porogen16
A porous swelling copolymeric material for improved implant fixation to bone16
Issue Information16
Bone healing under different lay‐up configuration of carbon fiber‐reinforced PEEK composite plates15
Issue Information15
Lower reactive oxygen species production and faster swimming speed of human sperm cells on nanodiamond spin‐coated glass substrates15
Advances in the Construction and Application of Bone‐on‐a‐Chip Based on Microfluidic Technologies15
Implementing Chicken Chorioallantoic Membrane (CAM) Assays for Validating Biomaterials in Tissue Engineering: Rationale and Methods14
Comparison between different fracture toughness techniques in zirconia dental ceramics14
Effects of glass–ceramic produced by the sol–gel route in macrophages recruitment and polarization into bone tissue regeneration14
Prodrug inspired bi‐layered electrospun membrane with properties of enhanced tissue integration for guided tissue regeneration14
Fabrication of collagen with polyhexamethylene biguanide: A potential scaffold for infected wounds14
Study on the difference of osteogenesis and Notch signaling pathway expression in biphasic calcium‐phosphorus ceramic granule materials with different microstructure13
Natural 3D Extra Cellular Matrix mimicking stem cells seeded decellularized scaffolds as a platform for tendon regeneration13
Effects of Thickness and Calcium Phosphate Ceramic Inclusion on PTMC/PLGA Blend Membranes for Supporting Bone Regeneration13
FEK self‐assembled peptide hydrogels facilitate primary hepatocytes culture and pharmacokinetics screening13
Bifunctional tissue‐engineered composite construct for bone regeneration: The role of copper and fibrin13
In vitro bioactivity of 3D microstructure hydroxyapatite/collagen based‐egg white as an antibacterial agent13
Biological properties of hydroxyapatite coatings on titanium dioxide nanotube surfaces using negative pressure method13
3D‐Printed conductive polymeric scaffolds with direct current electrical stimulation for enhanced bone regeneration13
Preparation and characterization of a self‐crosslinking sodium alginate‐bioactive glass sponge13
Extraction and Physicochemical Characterization of Hydroxyapatites From Horse Humerus Bones of Different Ages (1, 3, 6, and 8 Years old) Calcined at Low Temperature13
Surface modifications to promote the osteoconductivity of ultra‐high‐molecular‐weight‐polyethylene fabrics for a novel biomimetic artificial disc prosthesis: An in vitro study12
12
The passive behavior of biomedical alloys in simulated physiological solutions12
Influence of the calcium orthophosphate:glass ratio and calcium orthophosphate functionalization on the degree of conversion and mechanical properties of resin‐based composites12
Fabrication and in vitro study of3Dnovel porous hydroxyapatite/polyether ether ketone surface nanocomposite12
12
A preliminary evaluation of in vivo response to a filament‐wound macroporous collagen midurethral sling in an ovine model12
Preparation and properties investigation of biodegradable poly (glycerol sebacate‐co‐gelatin) containing nanoclay and graphene oxide for soft tissue engineering applications12
Tranexamic acid‐loaded hemostatic nanoclay microsphere frameworks12
The development of magnesium‐based biomaterials in bone tissue engineering: A review11
Transfection efficacy and drug release depends upon the PEG derivative in cationic lipoplexes: Evaluation in 3D in vitro model and in vivo11
Alkaline earth metals for osteogenic scaffolds: From mechanisms to applications11
Carrageenan‐Based Hydrogels for Advanced Wound Healing and Controlled Drug Delivery in Tissue Engineering11
11
Biocompatible polymeric blend for pH driven delivery of cytarabine: Effect of feed contents on swelling and release kinetics11
Correction to “Bonding of ceramics to silver‐coated titanium—A combined theoretical and experimental study”11
Recent advancements in natural polymers‐based self‐healing nano‐materials for wound dressing11
Effect of gamma irradiation and supercritical carbon dioxide sterilization with Novakill™ or ethanol on the fracture toughness of cortical bone11
Probing combinational influence of design variables on bone biomechanical response around dental implant‐supported fixed prosthesis11
Issue Information11
11
An In Vivo Assessment of Different Mesenchymal Stromal Cell Tissue Types and Their Differentiation State on a Shape Memory Polymer Scaffold for Bone Regeneration11
Biomechanical analyses of one‐piece dental implants composed of titanium, zirconia, PEEK, CFR‐PEEK, or GFR‐PEEK: Stresses, strains, and bone remodeling prediction by t11
Vascularization in tissue engineering: The architecture cues of pores in scaffolds11
Development and Characterization of a Novel Composite Hydrogel Biomaterial for Improved Mucoperiosteal Wound Repair11
Alginate as a Sustainable and Biodegradable Material for Medical and Environmental Applications—The Case Studies11
Retraction: Bone healing in critical‐size defects treated with new bioactive glass/calcium sulfate: A histologic and histometric study in rat calvaria11
11
Correction to “Human small intestine cancer cell membrane‐camouflaged quercetin‐melanin for antibacterial and antitumor activity”11
Advancements in Cartilage Tissue Engineering: A Focused Review10
Biomimetic engineered approaches for neural tissue engineering: Spinal cord injury10
Mechanical and numerical investigations of biodegradable magnesium alloy screws for fracture treatment10
Bioactive ZnO‐assisted 1393 glass scaffold promotes osteogenic differentiation: Some studies10
Urinary bladder augmentation with acellular biologic scaffold—A preclinical study in a large animal model10
Characterization and biological evaluation of a novel flavonoid‐collagen antioxidant hydrogel with cytoprotective properties10
A numerical investigation for the development of functionally graded Ti/HA tibial implant for total ankle replacement: Influence of material gradation law and volume fraction index10
Resin‐modified glass ionomer enriched with BIOGLASS: Ion‐release, bioactivity and antibacterial effect10
In vitro and in vivo evaluation of surface functionalization of titanium with H2O2 hydrothermal treatment and FGF‐210
Dissolution, bioactivity behavior, and cytotoxicity of 19.58Li2O·11.10ZrO2·69.32SiO2 glass–ceramic10
Porous CDHA microspheres laden brushite‐based injectable bone substitutes for improved bone regeneration10
Calcium phosphate incorporated in silk fibroin/methylcellulose based injectable hydrogel: Preparation, characterization, and in vitro biological evaluation for bone defect treatment10
Enhanced osteogenicity of the demineralized bone‐dermal matrix composite by the optimal partial demineralization for sustained release of bioactive molecules10
Polyethylenimine‐grafted mesoporous silica nanocarriers markedly enhance the bactericidal effect of curcumin against Staphylococcus aureus biofilm10
Polycaprolactone/chlorinated bioglass scaffolds doped with Mg and Li ions: Morphological, physicochemical, and biological analysis10
Cover Image10
Osseointegration and Histopathological Evaluation of Titanium–Titanium Diboride Composite Compared to Pure Titanium Implant Materials Prepared by Powder Metallurgy (In Vivo Study)10
G/ β‐ TCP composite scaffold material promotes osteogenic differentiation of bone marrow mesenchymal stem cells10
Repair of a rat calvaria defect with injectable strontium (Sr)‐doped polyphosphate dicalcium phosphate dehydrate (P‐DCPD) ceramic bone grafts10
ePTFE‐based biomedical devices: An overview of surgical efficiency9
Bioactive potential of Bio‐C Pulpo is evidenced by presence of birefringent calcite and osteocalcin immunoexpression in the rat subcutaneous tissue9
In Vivo Evaluation of Thermally Drawn Biodegradable Optical Fibers as Brain Implants9
Issue Information9
Platelet‐Rich Plasma Loaded Alginate‐Based Injectable Hydrogel for Meniscal Tear Repair: In Vivo Evaluation in Lapine Model9
Preclinical models for studying corticosteroid‐induced osteonecrosis of the femoral head9
Collagen membrane from bovine pericardium for treatment of long bone defect9
Issue Information9
Issue Information9
The improvement of periodontal tissue regeneration using a 3D‐printed carbon nanotube/chitosan/sodium alginate composite scaffold9
Aloe vera and ofloxacin incorporated chitosan hydrogels show antibacterial activity, stimulate angiogenesis and accelerate wound healing in full thickness rat model9
Harnessing IL‐10 induced anti‐inflammatory response in maturing macrophages in presence of electrospun dexamethasone‐loaded PLLA scaffold9
9
Rat liver ECM incorporated into electrospun polycaprolactone scaffolds as a platform for hepatocyte culture9
Comparison of engineered cartilage based on BMSCs and chondrocytes seeded on PVAPPU scaffold in a sheep model9
Comparison of Biofilm Accumulation on Conventional and CAD/CAM Orthodontic Band Alloys (In Vivo) and Subsequent Enamel Demineralization (Ex Vivo)9
A composite device for viscosupplementation treatment resistant to degradation by reactive oxygen species and hyaluronidase9
3D‐printed hydroxyapatite scaffolds for bone tissue engineering: A systematic review in experimental animal studies9
In vivo behavior in rabbit radius bone defect of scaffolds based on nanocarbonate hydroxyapatite9
Proof of concept testing of a positive reference material for in vivo and in vitro sensitization testing of medical devices8
8
Chlorinated‐based bioceramics incorporated in polycaprolactone membranes8
Issue Information8
Comparison of Collagen and Polylactic Acid Multifilament Yarns for Developing Textile Scaffolds for Tendon Tissue Engineering Applications8
Development of PHBV electrospun fibers containing a borate bioactive glass doped with Co, Cu, and Zn for wound dressings8
Probability of survival and stress distribution of narrow diameter implants with different implant–abutment taper angles8
Issue Information8
Sustained release of sulforaphane by bioactive extracellular vesicles for neuroprotective effect on chick model8
Cellulose nanocrystals‐reinforced dual crosslinked double network GelMA/hyaluronic acid injectable nanocomposite cryogels with improved mechanical properties for cartilage tissue regeneration8
Opportunities and challenges of hydrogel microspheres for tendon–bone healing after anterior cruciate ligament reconstruction8
Calcium Sodium Phosphosilicate in Management of Dentin Hypersensitivity and Strategies for Reconstitution of the Dentin Matrix8
Enhanced bioactivity and hydrothermal aging resistance of Y‐TZP ceramics for dental implant8
Biocompatibility improvement and controlled in vitro degradation of poly (lactic acid)‐b‐poly(lactide‐co‐caprolactone) by formation of highly oriented structure for orthopedic applicatio8
Issue Information8
A review on manufacturing processes of cobalt‐chromium alloy implants and its impact on corrosion resistance and biocompatibility8
Toward allogenizing a xenograft: Xenogeneic cardiac scaffolds recellularized with human‐induced pluripotent stem cells do not activate human naïve neutrophils8
Lotus root and osteons‐inspired channel structural scaffold mediate cell biomineralization and vascularized bone tissue regeneration8
Effect of femtosecond laser induced surface patterns on the flexural strength of monolithic zirconia8
Interpenetrating alginate network as drug delivery matrix: Effects on protein stability and release8
Additively Manufactured 3D Clamp‐Culture System for the Investigation of Material‐Cell Interactions in Multi‐Material Hybrid Scaffolds for Musculoskeletal Tissue Defects7
Mechanical properties andin vitrobioactivity of silicon nitride ceramics withSiO2,CaO, andMgOadditions7
Wear, Material Transfer, and Electrocautery Damage Are Ubiquitous on CoCrMo Femoral Knee Retrievals7
Biosafety and biodegradation studies of AZ31B magnesium alloy carotid artery stent in vitro and in vivo7
7
Analysis of the broad‐spectrum potential of nitric oxide for antibacterial activity against clinically isolated drug‐resistant bacteria7
Inhibition of focal adhesion turnover prevents osteoblastic differentiation through β‐catenin mediated transduction of pro‐osteogenic substrate7
Issue Information7
7
In vivo effectiveness of carbonated calcium‐deficient hydroxyapatite‐coated activated carbon fiber cloth on bone regeneration7
Magnesium promotes osteogenesis via increasing OPN expression and activating CaM/CaMKIV/CREB1 pathway7
Evaluation of alginate‐coated β‐tricalcium phosphate fiber scaffold for cell culture7
Cover Image7
7
Solvent types used for the preparation of hydrogels determine their mechanical properties and influence cell viability through gelatine and calcium ions release7
Effects of ceramic additives and bioactive coatings on the degradation of polylactic acid‐based bone scaffolds under hydrolytic conditions7
Injectable and self‐healing dual crosslinked gelatin/kappa‐carrageenan methacryloyl hybrid hydrogels via host‐guest supramolecular interaction for wound healing7
Antibacterial and biocompatible polyaniline‐doped titanium oxide layers7
A polyurethane‐based surgical adhesive for sealing blood vessel anastomoses—A feasibility study in pigs7
Cover Image7
Evaluation of Cartilage‐Like Matrix Formation in a Nucleus Pulposus‐Derived Cartilage Analog Scaffold7
Assessment of encrustation and physicochemical properties of poly(lactide‐glycolide) Papaverine hydrochloride coating on ureteral double‐J stents after long‐term flow of artifi7
7
Novel Foamed Magnesium Phosphate Antimicrobial Bone Cement for Bone Augmentation7
Advances in electrospun scaffolds for meniscus tissue engineering and regeneration7
Issue Information7
Research on the synthesis of nanoparticles of betulinic acid and their targeting antitumor activity7
Decellularised Amniotic Membrane for the Neurogenic Expression of Human Mesenchymal Stem Cells7
Composition, host responses and clinical applications of bioadhesives7
Controlling the bone regeneration properties of bioactive glass: Effect of particle shape and size7
Cranberry proanthocyanidins composite electrospun nanofibers as a potential alternative for bacterial entrapment applications7
The landscape of clinical trials in corneal regeneration: A systematic review of tissue engineering approaches in corneal disease7
0.17674398422241