Polymer Science Series B

Papers
(The median citation count of Polymer Science Series B is 1. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-09-01 to 2025-09-01.)
ArticleCitations
Unusual Role of N-Methylmorpholine N-Oxide in the Radical Polymerization of Acrylonitrile33
Synthesis of an Aliphatic Dianhydride Monomer and Its Colourless, Low Dielectric Constant Aliphatic Polyimides19
Synthesis of Poly(trimethylene terephthalate) with Enhanced Properties by Using a Novel Titanium Catalyst-Toner Combination18
UV Photoinitiated Temperature-Sensitive Modification of Polypropylene Grafted with Poly(N-isopropylacrylamide)15
High Resilience and Elongation of Linear Polyurethane Acrylate Modified with Polyetheramines14
Novel Type Polyrotaxanes Based on the Copolymer of Polyethylenimine, Poly(ethylene glycol), and Alpha-Cyclodextrin13
Chemical Polymerization Method to Synthesize Polyaniline as a Novel Anode Catalyst in Microbial Fuel Cell12
Crosslinking Kinetics for Blends of Polyisoprene and MQ Copolymers12
Enhancement of Crack Resistance of Phthalonitrile-Based Carbon Fiber Reinforced Plastics by Introducing Polyamide Nonwoven Materials11
Electrical Conductivity and EMI Shielding Efficiency of PPY-PVA-Ni Nanocomposite Films10
The Synthesis of Bromobutyl Rubbers with Desired Allylic Bromide Structures and Mechanism Suggestion10
Organosoluble and Light-Colored Fluorinated Polyimides Prepared from Bis[4-(4-amino-2-trifluoronethylphenoxy)phenyl]ether and Aromatic Dianhydrides10
Temperature-Dependent Studies on Electrical Properties of ZnCl2 Doped Polyaniline10
Self-Organizing Particles of Polymer–Colloid Complexes Based on Various Molecular Weight Copolymers of N,N'-Diallyl-N,N'-dimethylammonium Chloride with Sulfur Dioxide10
Synthesis and Characterization of Schottky Diodes from Polyaniline Doped with Trifluoroacetic Acid8
Synthesis, DSC Properties, Surface Morphology and the Third-Order Behavior Studies of a Conducting Polymer7
Allyl-Substituted Hydridopolycarbosilane with Low Curing Temperature and High Ceramic Yield under a Redox Initiation System7
Influence of Rheological Characteristics of Solutions of Mixtures of N-Succinyl Chitosan and Carboxymethylcellulose Sodium Salts on Some Properties of Materials Obtained from These Solutions7
Erratum to: Vinyl Modified Cloisite 30B Clay as an Efficient Filler for the Synthesis of Poly(styrene-co-butyl acrylate)/Clay Nanocomposite by Emulsion Polymerization7
Retraction Note: Nanofiltration Membranes Based on Blend of Polysulfone-g-poly(tert-butylacrylate) Copolymer and Polysulfone7
Effect of Aniline Oligomers in Aniline Chemical Oxidative Polymerization on Polyaniline Supramolecular Structures7
Synthesis of Mixed Functional Oligoaryloxycyclotriphosphazenes7
Preparation and Rheological Properties of Paper-Based Superhydrophobic Materials7
Properties Evaluation of PPY-CuO Incorporated GO as Electron Transporting Layer Material for OLED Application7
Hydrophilic Antistatic Modification: Preparation and Properties of Long-Chain Segment Copolymerized PET7
Reduction Performance and Mechanism of Liquid Terminated-Carboxyl Fluoroelastomers Using Unitary or Binary Metal Hydride Reduction Systems7
Investigation of Thermal Properties of Polyureas6
Features of Thermo-Oxidative Degradation and Pyrolysis of Nanocomposites Based on Porous Polyethylene and Silica6
Preparation and Application of UV Curable Waterborne Organosilicon Acrylic Polyurethane with Controllable Silicon Content6
Synthesis and Characterization of a Novel Unsaturated Polyester Nanoсomposite Incorporating Graphene Oxide, DCPD Maleate and Poly(MMA-BuA)6
Syntheses and Characterization of Skeletally Modified Cardanol Based Asymmetric Benzoxazines with Enhanced Thermal and Hydrophobic Properties5
A New Approach to the Synthesis of Poly[Pyrrole-co-Vanillin] Semiconductor Polymer Doped with FeCl35
Modeling of Free-Radical Polymerization under Periodic Photoinitiation5
High Water Resistance Polyvinyl Alcohol Hydrogel Film Prepared by Melting Process Combining with Citric Acid Cross-Linking5
Influence of Composition of Copolymers of Glycidyl Methacrylate and Alkyl Methacrylates on the Free Energy and Lyophilic Properties of the Coatings5
Biocidal Copolymers of Methacryloylguanidine Hydrochloride with Methacrylamide and Diallyldimethylammonium Chloride5
Preparation of PP/PP-g-NPMI Separators with High Hydrophilicity and Heat Resistance for Lithium Batteries5
Influence of Crystal Structure on the Set of Physicomechanical Characteristics of Composite Materials Based on Ultra-High Molecular Weight Polyethylene5
Synthesis of Bis-unsaturated Macromonomers Catalyzed by a Green Maghnite H+ Catalyst5
Green Synthesis Method of Poly[(2,5-diyl pyrrole)(4-hydroxy-3-methoxy benzylidene)] Semiconductor Polymer Using an Ecologic Catalyst5
Preparation of Molecularly Imprinted Polymer Based on Calcium Acrylate and Acrylic Acid5
Hydrogels of Paired Polymers with Lactam and Imidazole Rings5
Effect of Processing Temperature on the Thermal and Mechanical Properties of BPDA–PDA4
Synthesis and Characterization of Polypyrrole/TiO2 Hybrid Composite: Structural and Electrical Insights4
The Effect of Electron Deficiency of the N-aryl Fragment on the Catalytic Properties of Titanium Phenoxy-Imine Complexes in the Ethylene Polymerization4
Model Free Thermal Degradation Kinetics of Bisphenol-Z Based Polymers Containing Substituted Cyclohexane Group: Syntheses and Spectral Characterization4
Tailoring of Nanophase Structure in Epoxy/Epoxidized Poly(styrene)-b-poly(isoprene)-b-poly(styrene) Blend by Tuning of the Molar Ratio of Styrene Block4
Flexible Low Dielectric Polyimide/Fluorinated Ethylene Propylene Composite Films for Flexible Integrated Circuits4
Study of the Interaction of Polyphenylsilsequioxane with Boronic Acid under Conditions of Mechanochemical Activation4
Formation of Zinc Oxide Nanoparticles in Aqueous Solutions of Carboxymethylcellulose and Their Physico-Chemical Properties4
Use of Chitosan-Coated Conductive Copper/Nanoparticle Polymer in Drug Delivery System by Encapsulation Method4
Structural, Electrical and Dielectric Studies on Novel Chitosan/Polyaniline/Molybdenum-Trioxide Hybrid Nanocomposites4
Photocontrolled Radical Polymerization of Methacrylate Monomers Mediated by Systems Based on Aryl Derivatives of Phenothiazine4
Preparation and Microwave Curing of Blended Phenolic Epoxy Fibers4
Graft Polymerization of 5-Vinyltetrazole onto Chitosan4
Tailoring the Physical Properties by Gamma-Irradiation of Cellulose Nitrate Films: Insights in Different Applications3
Two-Step Ethylene Slurry Polymerization with Magnesium Dichloride-Supported Titanium Catalyst3
Loosely Crosslinked Hydrogel with Combined Water-Retaining and Anti-Erosion Effect3
Preparation and Properties of Polypropylene Compositions with Binary Carbon Nanofillers3
Preparation of VOx/SiO2-dope Copolymer Super-Slippery Surface Composites3
The Polymerization of β-Ocimene by Using the Borohydrido–Neodymium as Pre-catalyst3
Low Flammability Polymers Based on Phosphorus-Containing Methacrylates3
Study of the Antimicrobial Action of Chitosan Coating Doped with Fluorinated Quinolines3
Block Copolymers of Styrene with 4-Vinylpyridine and Acrylic Acid as Stabilizing Ligands of CdSe/ZnS Quantum Dots3
New Macromolecular Ligands with Main-Chain Pyridylquinoline Units and Their Metal-Polymer Complexes with Europium3
Copolymers of L-Lactide and ε-Caprolactone: Synthesis, Structural Analysis, and Mechanical Properties3
The Effect of the Properties of the Anion on the Process of Formation of a Copper Sol upon Reduction in a Solution of Poly(N-vinylpyrrolidone)3
Synthesis and Metathesis Polymerization of New Monomer 7-Trimethylsilyltricyclo[4.2.2.02,5]deca-3,9-diene3
Kinetic Constants of Isoprene Polymerization on a Multicenter Gadolinium Catalyst3
Effect of the Chemical Structure of Chitosan Copolymers with Oligolactides on the Morphology and Properties of Macroporous Hydrogels Based on Them3
Preparation and Characterization of Graphene Oxide/Waterborne Polyurethane Composites3
Synthesis of Cooligomer Based on 2-Allylphenol, Formaldehyde, and Ethylenediamine and Study of Its Structured Product as a Sorbent for Extraction of Uranyl Ions from Aqueous Systems3
On the 80th Anniversary of the Birth of Academician Yuri Borisovich Monakov3
Preparation and Study of Moth-Eye-Like Micro-Nano Structure Optical Anti-Reflection Coating3
Intermolecular Interactions between Iodine and Low-Methoxylated Apple Pectin Modified with Pharmacophores3
Study of Structural, Thermal and Electrical Properties of Functionalized Multiwalled Carbon Nanotubes–Polyaniline Composites3
Synthesis and Characterization of Poly(vanillin pyrrole)/Zinc Oxide Composite for Photocatalysis Application under Natural Sunlight Irradiation3
Synthesis, Characterization and Emulsifying Property of the Polyamide Elastomer with Favorable Self-healing Performance3
Epoxy Nanocomposites Containing Silver Nanoparticles with Oligostyrylcarboxylate Ligands3
Investigation of Mechanisms of Polyethylene Degradation under the Action of Natural Climatic Factors3
Kinetic Features of Radical Ring-Opening Polymerization of Ketene Acetals2
Prospects for Application of Guanidine-Containing Organomineral Complexes as Biocidal Functional Additives for Waterborne Polymer Materials2
DFT Calculations of Some Important Radicals Used in the Nitroxide-Mediated Polymerization and Their HOMO‒LUMO, Natural Bond Orbital, and Molecular Electrostatic Potential Comparative Analysis2
Cyanate Ester Monomers and Oligomers. Overview of the Modern Research State and Perspectives2
Homogeneous Hydrophobic Modification of Hydroxyethyl Cellulose in Ionic Liquids2
Gas Sensors Based on Conjugated Oligomers and Polymers as Promising Sensitive Elements for Toxic Gases Monitoring in the Atmosphere2
High-Strength and Self-Healing Polyurethane Based on Dynamic Covalent Bonds for Concrete Protection2
Influence of Thermal Curing on the Chemical Composition of Microphases and the Properties of the Prepared Polyepoxy Urethane-Containing Isocyanurate2
Development of Bionanocomposite from Natural Polymer and Its Application in Wastewater Treatment and as an Antimicrobial Agent2
Water-Soluble Hybrid Core–Shell Nanoparticles with Titanium Dioxide Core and Poly(Acrylic Acid) Shell2
Enhancing Glass Transition Temperature of Poly(methylmethacrylate) by Incorporating Methacrylate-Functional Silane Grafted SiO2 Nanoparticles2
Preparation of Nebula-like Polysiloxane/Silica Superhydrophobic Composite Microspheres Controlled by Density Method2
Grafting Polybutadiene onto Surfaces of Talcum Powder by Spray-Drying Technology and Modification of EPDM Rubber2
Effect of Morphology on the Electrical Conductivity of Polyaniline as Potential Photocatalyst2
Advances in the Synthesis of Oligomer Epoxyphosphazenes with Reduced Inflammability2
Polyelectrolytes and Polycomplexes for Stabilizing Sandy Grounds2
Synthesis and Characterization of Biodegradable and Cytocompatible Polyurethane-Egg Shell Derived Hydroxyapatite Biomaterials2
High Melt Strength Polylactic Acid: Synergistic Effect of Peroxides and Branching Coagents on Long-Chain Branching2
Investigation of Synthesis, Characterization, and Biological Activities of Water-Soluble Polymer with Horseradish Peroxidase Enzyme2
Editorial Expression of Concern: Novel Reactive Polymerizable Nonyl Phenol Ethoxylate Surfactants as Emulsifier in Non-Aqueous Emulsion Polymerization2
Preparation of the Pincushion-Like Multilayer Structure Materials by Amphiphilic Polymer for Biomimetic Super-Hydrophobic Materials2
Size Kinetic Effects during Aerosol Polymerization2
Thermal Behavior of Poly(acrylonitrile-co-1-vinyl imidazole) During Stabilization2
Enzyme Catalyzed Synthesis of Water Soluble Mesalazine Oligomers and Evaluation of their Efficiency in Polypropylene Stabilization2
Effects of Surface Modified Graphene Oxide on the Cure Kinetics of Warm-Mixed Epoxy-Asphalt2
Encapsulation of Molecularly Imprinted Polymer Particles in Microcapsule by Facile Pickering Emulsion Polymerization2
Influence of Ultraviolet Radiation on Epoxy-Polysulfone Fiberglass2
Anion Exchangers Based on 4-Vinylpyridine and Alkyl Dihalides: Synthesis and Application in the Sorption of Noble Metal Ions and the Addition of СО2 to Epoxides2
Synthesis and Characterization of Arabinoxylan Psyllium Mucilage-2-methacryloyloxyethyl Trimethylammonium Chloride Copolymeric Hydrogel by Gamma Radiation for Use in Drug Delivery Applications2
Effective Low Temperature Cure Cardanol Based Mono-Functional Benzoxazines: A Comparison2
Controlled Synthesis of Copolymers of N-Vinylsuccinamic Acid and Vinyl Alcohol for Immobilization of Low-Molecular-Weight Biologically Active Substances2
Composite Textile with Electroconductive and Magnetic Properties2
Synthesis of Composite Polymer Particles by Seeded Emulsion Polymerization and Formation of Photonic Crystals Based on Them2
Modified Antiproteinase Hemosorbent2
Formation of Composite Polymer Photonic Crystals and Study of Their Properties by Optical Spectroscopy Methods2
Synthesis of Ultramicroporous Polymer Materials for CO2 Adsorption1
Preparation of Polyacrylate Emulsion with High Adhesion Properties by Adding Modified Silica Sol1
Two-Photon Stereolithography—Optical Nanolithography1
Polyelectrolyte Complexes of Poly(N,N-diallyl-N,N-dimethylammonium Chloride) and Drug Microparticles on Their Basis1
Synthesis and Physicochemical Properties of the Nanocomposites Based on Sodium Carboxymethyl Cellulose and Selenium Nanoparticles1
(Co)polymerization Reactions with Participation of Cyclic Monomers Catalyzed by Double Metal Cyanide Catalysts1
NMR Investigation of Tetrad Splitting in Regularly Alternating Diphenylene Oxide–Diphenylene Sulfide Copolyarylenephthalides of Periodic Structure1
Preparation of Photocoated Polysiloxane Nanoparticles from 3-Mercaptopropyl Trimethoxysilane with Furan Substitues by the Photoinitiated Thiol-Ene Reaction1
Synthesis of Poly(Ethylene Terephthalate)–4'-Hydroxybiphenyl-4-Carboxylic Acid Copolymers by Transesterification1
Emulsion and Dynamics of Acrylate Prepared by ARGET-ATRP under a Compound Initiation System1
Fire and Heat Retardant Polymer Materials and Coatings with Functionally Active Phosphorus–Boron–Nitrogen-Containing Components1
Isophorone Diisocyanate and Trimethylolpropane in-situ Prepared Hydroxyl-Terminated Block Copolymer Binder with Excellent Mechanical Properties1
Binary Soil Ameliorants Composed of Synthetic Polyanion and Natural Humates1
Features of the Effect of Organochlorine Compounds on Polymerization of Olefins and Dienes in the Presence of Ziegler–Natta Catalysts1
Synthesis and Characterization of Magnetic Molecularly Imprinted Polymers for the Adsorption of Chlorpyrifos from Aqueous Media1
Metathesis Polymerization of 5-n-Butyl-2-Norbornene in the Presence of Dimethyl Maleate1
Development of a Novel Thermal Resistant Polysulfide/Carbon Fiber Semi-Crystalline Composite1
Mechanical Properties of Graphene Oxide Doped Woven Carbon Fibers/Epoxy Composites in Tension1
Study of the Products of Monobenzoxazine Polymerization by X-ray Photoelectron Spectroscopy1
Preparation and Performance of Epoxy Resin Composite Microspheres with Controllable Wettability1
Synthesis, Characterization and Adsorption Study of Methyl Orange on Imidazolium-based Poly (Ionic Liquid) Hydrogels1
Studies on Electrical, Dielectric and Seebeck Measurement of Polyaniline-Cadmium Oxide Nanocomposite1
Poly(p-xylene trisulfide): Synthesis, Curing and Investigation of Mechanical and Thermal Properties1
Features of Synthesis of Graft Copolymers of Chitosan and Acrylic Acid1
Synthesis of Biodegradable Lactide-Based Polymers in the Presence of Metal-Free Organocatalyst1
Changes in Optical, Electrochemical and Electrical Conductivities in the Conductive Polymer Mixture by Adding Different Surfactants1
Effect of Nanoparticle-Filled Lubricant Layer on Fluoropolymer Slippery Liquid-Infused Porous Surface1
Kinetics of Dissolution of Polyacrylonitrile in N-Methylmorpholine-N-oxide in the Absence and Presence of Cellulose1
Copolymers of Sodium Styrene Sulfonate and 2-Deoxy-2-methacrylamido-D-glucose with Antiviral Activity1
Composites Based on Biodegradable Polymers and Layered Structures1
Effects of Carbon Nanotubes on the Compressive and Flexural Strength and Microscopic Structure of Epoxy Honeycomb Sandwich Panels1
Relationship between the Structure of Fluorine-Containing Phenoxy-Imine Complexes, Their Spectral Properties and Activity in Ethylene Polymerization1
A Hybrid Deep Learning Model for Predicting Lifetime and Mechanical Performance Degradation of Multilayer Greenhouse Polyethylene Films1
Protective Nanocomposite Coating Based on Ginger Modified Clay and Polyurethane: Preparation, Characterization and Evaluation Anti-Corrosion and Mechanical Properties1
Determination of Lignin Content in Plant Materials Using Solid-State 13C NMR Spectroscopy1
Epoxy-Amine Systems with Reactive Guanidine Derivatives1
Effect of Doped Cadmium Sulfide Nanosized Particles on the Thermal and Optical Properties of Poly(methyl methacrylate)1
Micro Scratch Behavior Study of Titanium Dioxide and Graphene Nanoplatelets Reinforced Polymer Nanocomposites1
Synergistic Effects of Psyllium/Okra Hybrid Backbone Based Bio-Sorbent for Efficient Sequestration of Toxic Uranyl(VI) Ions from Aqueous Media1
Modification of the Nafion Membrane Using a Chitosan Solution in Carbonic Acid under Pressure1
Novel Biocomposites Based on El Retma Natural Fiber and PLA/PC Mixture Compatibilized Using Samarium Acetylacetonate Catalyzed Interchange Reactions1
Synthesis of Strong Anion Exchangers by the Interaction of 4-Vinylpyridine with Epoxy-Containing Alkylating Reagents and Their Use in the Sorption of Noble Metals1
Microporous Polymers Based on Rigid-Chain Di- And Triacetyl Aromatic Compounds1
Photoreduction Reaction of Carbonyl-Containing Compounds in the Synthesis and Modification of Polymers1
In-Situ Elevated Temperature Interlaminar Shear Response and Thermal Behavior of Graphene Nanoplatelet Reinforced Kevlar/Epoxy Laminated Composites1
Fabrication of Bone Morphogenic Protein-2 and Icariin-Containing Sustained-Release Microcapsule and Evaluation of its Osteogenic Differentiation Capacity in MC3T3-E1 Cells1
Synthesis, Spectral and Thermal Characterization of 1,1-Bis(4-hydroxyphenyl)cyclohexane (BPZ)/1,1-Bis(4-hydroxyphenyl)-4-methylcyclohexane (MBPZ) Cardo Copolyesters1
Boron(III)-Containing Composite Hydrated Cellulose Fibers As Precursors of Carbon Materials1
Comparative Analysis of Magnetorheological Effect in Soft Isotropic and Anisotropic Magnetoactive Elastomers1
Salts of Organic Acids as Reducing Agents in Atom Transfer Controlled Radical Polymerization1
Investigation of the Processes of Formation of Water-Dispersible Polyurethane Acrylates Based on Oligomeric Isocyanurates of Isophorone Diisocyanate1
Ganoderma Lucidum-Modified Clay Epoxy Coating: Investigation of Thermal, Mechanical, Anticorrosion, and Antimicrobial Properties1
Codeposition of Gallic Acid and Polyethylene Imine on Carbon Fiber Surfaces to Enhance Interfacial Properties of Epoxy Composites1
Synthesis and Anti-aging Properties of Vinyl triethoxysilane Modified Fluorinated Acrylate Polymer Coatings for Stone Relics Conservation1
Enhanced Thermal, Optical and Mechanical Performance of Copolyimide Composite Film Filled with TSP-POSS1
New Bio-Based Copolyesters Derived from Novel Cyclic Diol 2,5-Tetrahydrofurandimethanol, 2,5-Furardicarboxylic acid and 1,3-Propanediol: Synthesis, Thermal Behavior and Rheological Properties1
Novel Rare-Earth Complexes Containing Amino and Sulfhydryl Groups for Natural Rubber Composites with Improved Antioxidative Properties1
Antibacterial Activity of Polymer Blend Nanocomposites with the Incorporation of Bentonite and Gold Nanorods1
Hydrophilic Modified Siloxane Coatings1
Study on the Preparation and Properties of Carboxymethyl Chitosan as Fast Hemostatic Material1
Synthesis of Ultrahigh Molecular Weight Polyethylenes with New Catalyst Based on Ti4+ Complex with a Tridentate Phenoxyimine Ligand1
Alginate Functionalization for the Microencapsulation of Insulin Producing Cells1
Reactivity of New Monomers of the Polyurethanes Green Chemistry, the Reaction Mechanism, and the Medium Effect1
Adsorption Removal of Cationic Dye (Methylene Blue) and Anionic Dye (Congo Red) into Poly(m-aminophenol)/x%SnO2 Nanocomposite (with x = 1, 3, and 10)1
Isolation and Physicochemical Characteristics of Pectin from Inonotus Hispidus1
Preparation and Characterization of Universal Cold-Resistant Reactive Chlorinated Acrylic Rubber and Study of Its Vulcanization Characteristics1
Graft Polymerization Induced Enhanced Dyeing Performance and Antibacterial Properties of Kosa Silk1
Study on Lanthanum Cerium 6-Methyluracil As Heat Stabilizer of Polyvinyl Chloride1
0.1944751739502