Current Applied Physics

Papers
(The TQCC of Current Applied Physics is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Effect of sintering temperatures on physico-mechanical properties of single-phase magnesium borate nanorods95
Fully automated analysis approach for in situ electron diffraction67
Pre-twisted hybrid LC polarization rotator with ultra-broadband and low-voltage operation51
Fluorine- and maleimide-functionalized electrolyte additive as an interface modifier for Ni-rich LNMC/SiO batteries46
Inexpensive and highly controlled growth of zinc oxide nanowire: Impacts of substrate temperature and growth time on synthesis and physical properties44
Electronic and optical properties of strain-locked metallic Ti2O3 films44
A self - Consistent higher-order strain gradient plasticity analysis of micropolar dual-phase crystalline FGM made of Titanium-boride/ Titanium41
Impact of electroplating salt (AgNO3) concentration on the morphological, optical, electrical and thermoelectric properties of silver assisted electrochemically etched silicon nanowires (SINWs)37
Manipulating edge current spin polarization in zigzag MoS2 nanoribbons34
Laser scribed graphene/polymer composites: A possible verification of carbon nano-coil inductors34
Localized and delocalized electron states in TiO2 revealed using resonant inelastic soft X-ray scattering31
Effect of temperature on the performance of Cesium formamidinium lead mixed halide perovskite solar cells31
Recent technical advancements in ARPES: Unveiling quantum materials31
Asymmetric-gate Mach–Zehnder interferometry in graphene: Multi-path conductance oscillations and visibility characteristics31
Multifunctional properties of tin oxide nanoparticles synthesized by green and chemical approach30
Optical properties of popular dielectric substrate materials in a wide spectral range from far-infrared to ultraviolet29
The coexistence of electrostrictive and magnetostrictive properties in a polycrystalline ZnO film28
Investigation of gradient band gap in Cu2ZnSnS4 thin films with residual strain28
Luminescent properties of terbium doped NaKLaNbO5 phosphors for green light emitting applications28
Enhanced energy storage performance of lead-free bismuth ferrite-strontium titanate multilayers via polarization spiral structures27
Effect of bromine on the formation of δ-CsPbI3 in Cs0.22FA0.78Pb(I1-xBrx)3 perovskite solar cells25
Tailoring ferroelectricity via non-electrical external stimuli24
Lanthanum and oxygen incorporated MoS2 for advanced aqueous zinc ion batteries24
Observation of the Nernst effect in a GeTe/NiFe structure23
Autonomous sampling of α-Fe2O3 hollow microspheres with carbon-stabilized defects: calcination-tuned humidity sensor performance22
Budget-friendly nanofabrication: Porous structures from high voltage DC and chemical etching22
Role of Ti interfacial layer in the stability of TiO2 based transparent synaptic device22
Effect of calcination temperature on the microstructure and energy storage performance of bismuth layer-structured relaxor ferroelectric BaBi2Nb2O9 ceramics21
Numerical analysis of the influence of sidewall defects on AlGaN-based deep ultraviolet micro-light emitting diodes21
Hierarchical synthesis of binary ZnO@MWCNTs heterogeneous photocatalyst derived from porous Zn metal organic framework (MOF) template: Study on the effective photodegradation of Congo red (CR) dye21
Field emission and x-ray effect on RAON half-wave resonator (HWR) superconducting cavity performance20
Editorial Board20
Hysteretic magnetoresistance in superconducting SrTiO3/LaAlO3/SrTiO3 trilayer interface system20
Observation of the floating sheath distribution on Al2O3 and silicon targets adjacent to a DC biased metal substrate20
Preface20
Synthesis and characterization of PVA/KC/NaYF4:Eu3+ composite fluorescent films20
Effect of antisolvent application time on CH3NH3PbI3 solar cells in ambient atmosphere20
Probing the role of hydrolytically stable, 3-aminopropyl triethoxysilane crosslinked chitosan/graphene oxide membrane towards Congo red dye adsorption19
Brush drawing multifunctional electronic textiles for human-machine interfaces19
Computational screening of vdWs heterostructures of BSe with MoSe2 and WSe2 as sustainable hydrogen production materials19
Solvent-free microfabrication of thin film device using the focused ion beam19
Temperature dependence of complete sets of material constants of Pb(In1/2Nb1/2)O3–Pb(Mg1/3Nb2/3)O3–PbTiO3 crystals using different poling methods19
Controlling quantum interference in tetraphenyl-aza-BODIPYs19
G-C3N4/TiO2 nanotube array for enhanced photoelectrochemical water splitting19
Web-based applications for automated generation of functionalized graphene and carbon nanotube for molecular dynamics simulations and automated three-dimensional analysis of ion flow through nanopores19
Expansion of a finite-size photoplasma in an electrostatic field with M-type electrode configuration using a novel adaptive mesh 2D-PIC code18
Evolution of magnetic anisotropy in La0.67Sr0.33MnO3 thin films due to the appearance of out-of-plane magnetization at low temperature18
Structural and optoelectronic analysis of a novel perylene diimide as a light-harvesting material for dye-sensitized solar cells18
Interlinking the Fe doping concentration, optoelectronic properties, and photocatalytic performance of ZnO nanostructures17
Observation of Griffiths phase, spin glass behaviour and magnetocaloric effect in frustrated Ga2Mn2-xCrxO7 (x = 0, 0.1, 0.3, 0.5) pyrochlore compounds17
Prominently optimized thermoelectric performance via possibly magnified carrier energy filtering effect in sandwich-structured p-type Cu-doped Bi0.5Sb1.5Te3 films17
The significant improvements of DC magnetron sputtering plasma source via cryogenic cooling method for spintronics applications16
Design and application of multi-absorption and highly sensitive monolayer graphene microstructure absorption devices located at terahertz frequencies16
Fabrication perspective of Fe3O4-based cross-cell memristive device for synaptic applications16
Tailoring the electrochemical performance of the polymer electrolyte using Na2H20B4O17 for magnesium sulfur battery applications16
Structural and electronic properties of oxygen adsorption on TiN(001) surfaces: A first-principles study16
First-principles study of the thickness-dependent shift current in γ-GeSe thin layers16
Global gyrofluid simulations of turbulence in tokamak plasmas16
Observation of magnetoconductivity with terahertz probes for ferromagnetic Fe films15
Transparent CdSe/ZnS quantum-dot light-emitting diodes with WOx/Ag/WOx transparent electrodes achieving higher efficiency than opaque quantum-dot light-emitting diodes15
Enhanced resistive switching performance of spinel MnCo2O4 resistive random access memory devices: Effects of annealing temperatures and annealing atmospheres15
Zr and V-doped effect on Martensitic transformations and magnetic properties of NiMnIn shape memory alloy15
Anomalous Stark effect and optical properties of exciton in a quantum dot with linear potential under ionized donor hydrogenic impurity15
Two-level system loss characterization of NbTi superconducting resonators on Si/SiO2 substrates15
Substitutional effects of the anionic group systems [BO], [PO ], and [SO] on the down-conversion photoluminescence properties of Y2O3:Er3+ nanophosphors15
Lead ion detection using glutathione-functionalized aluminum gallium nitride/gallium nitride high-electron-mobility transistors15
Characterization of sol gel derived spin coated copper incorporation of CdS films for nonlinear optical applications15
Electrical cycling induced evolution of internal resistance and interfacial capacitance distributions in PZT thin-film capacitors15
Contact holes in vertical electrode structures analyzed by voltage contrast-SEM and conducting AFM15
Empirical relation between the Hall voltage and domain wall position in a Hall bar geometry15
Fabrication and characterization of magnetic-field-resilient MoRe superconducting coplanar waveguide resonators14
3D printed magnets with custom field geometry, produced using SmCo5/Fe exchange coupled nanocomposites14
Strain-dependent Rashba effect, and spin Hall conductivity in the altermagnetic Janus V2SeTeO monolayer14
Eliminating adhesive layers in silver metallization: A comparative study of glass cleaning methods for enhanced hydroxylation and adhesion14
Proton doping of graphene FETs enabled by ionic modulation from polysilazane dielectrics14
Tungsten oxide-copper oxide supported on reduced graphene oxide as a proficient electrocatalyst with enhanced hydrogen evolution efficiency in an alkaline media14
Systematic analysis of the optical properties of ZnGa2Se4 single crystal14
Compact wideband implantable antenna for biomedical applications14
Giant effective g factor and anisotropy in Sn1−EuTe: Contribution from spin-orbit and s/p − f hybridization14
Quantitative analysis of Hall effect in two-dimensional materials14
High vis-light photocatalytic property of g-C3N4 on four pollutants (RhB, MB, TC-HCl and P-Nitrophenol)14
Investigation of Sr doping on structural, morphological, optical, photocatalytic and antifungal properties of NiO thin films prepared by spray coating technique13
Impact of InGaN notch on sensitivity in dielectric modulated dual channel GaN MOSHEMT for label-free biosensing13
A promising nonlinear optics and optical limiting attributes in single organic coumarin-based compounds13
Preparation and characterization of ferromagnetic Cu doped ZnO13
Bipolar resistive switching characteristics of silver doped tin sulphide based ReRAM devices13
Nanofibrous membrane of polyacrylonitrile with efficient adsorption capacity for cadmium ions from aqueous solution: Isotherm and kinetic studies13
MXene-based composites for high-performance and fire-safe lithium-ion battery13
Energy transfer of Er3+-Nd3+ co-doped in tellurite glass via energy level match13
Synthesis and physical properties of Cr-doped Kagome superconductor CsV3Sb513
LDH of NiZnFe and its composites with carbon nanotubes and data-palm biochar with efficient adsorption capacity for RB5 dye from aqueous solutions: Isotherm, kinetic, and thermodynamics studies12
Investigation of low-temperature thermoelectric properties of Si0.8Ge0.2 alloy irradiated by high energy electron beam12
Energy landscape study by telegraph noise of domain wall motion12
Optical signature of the formation of vertical HfS2 nanosheets grown on sapphire substrate12
Plasmonic dual-silver decorated dielectric nanoantenna arrays for enhanced surface-enhanced Raman scattering (SERS) sensors12
Editorial Board12
Critical behavior and its correlation with magnetocaloric effect in amorphous Fe68+Cr12-Si8B12 (x=0, 4 and 10) ribbons12
High-performance PVDF-HFP/ZnO/SrFe12O19 nanogenerators with enhanced dielectric, ferroelectric, and magnetoelectric coupling for powering low-power electronics12
Nanosecond electric pulse-induced ultrafast piezoelectric responses in Co3+ substituted BiFeO3 epitaxial thin films12
Editorial Board12
Editorial Board12
Precise analysis of electrical properties in MoS2 devices via H-TFSI ion reactions12
Investigation of key factors influencing UV-induced quantum yield in charge management11
Characterization of optical phase-locked two distributed-feedback fiber lasers for 87Rb atom interferometry11
Recrystallization reduces surface oxygen vacancies to unlock hole transfer channel for hematite photoelectrochemistry11
Editorial Board11
Dipole formation and electrical properties of high-k/SiO2 interface according to the density of SiO2 interfacial layer11
Sodium Tantalate doping-induced phase structure Regulation and electrical property enhancement in lead-free (Bi0.5Na0.5) 0.94Ba0.06TiO3 ceramics11
Effects of spark dielectric barrier discharge plasma on water sterilization and seed germination11
Polarization-mediated electromagnetic and transport properties of multiferroic MnSe2/Al2S3 van der Waals heterostructures11
Variation of critical current density with superfluid phase stiffness in composite system of YBCO and Sn-nanoparticles11
Advancing burn wound monitoring: A non-invasive photoacoustic imaging approach11
Electronic, mechanical and contact properties of Mo4/3B2T2 (T=F, O, OH) monolayer: A first principles study11
Ferromagnetism in defective yttria-stabilized zirconia11
Editorial Board11
Investigation of the dielectrically modulated electron hole bilayer tunnel field effect transistor for biomolecule detections11
Parametric dependence of CsPbI2Br perovskite film growth using a mist chemical vapor deposition method11
Flexible and sustainable dielectric materials from natural rubber and Caryota urens extract for wearable and soft electronic devices11
Editorial Board11
Editorial Board11
Low-temperature magnetic ordering in Co core/CoO shell nanoparticles on the copper surface11
Crystallographic orientation dependence of ferroelectric domain walls in antiferroelectric lead zirconate thin films10
Molecular dynamics analysis of water flow through a multiply connected carbon nanotube channel10
YBCO polycrystal co-added with BaTiO3 and WO3 nanoparticles: Fluctuation induced conductivity and pseudogap studies10
Spectroscopic investigation of atmospheric pressure cold plasma jet produced in dielectric barrier discharge10
Low hysteresis loss and moderate magnetic entropy change near room temperature in the bulk Ni39Co7Mn43Sn7Ti4 alloy10
Effect of annealing temperature on oxygen vacancy and infrared radiation properties of the Co doped α-MoO3 materials10
High frequency permittivity of rare-earth Er-doped MoS2 films10
Electrochemical sensing of H2O2 using cobalt oxide modified TiO2 nanotubes10
Infrared spectroscopic study on Nb-ion-irradiated MgB2 thin films10
CrP2Se6 monolayer: Two-dimensional intrinsic ferromagnetic half-metal with large magnetic anisotropy and high Curie temperature10
Quantum phase-change materials on amorphous silicon film doped with impurities10
Effect of sputtering pressure on the properties of large area IWO thin films deposited by direct current magnetron sputtering10
Bipolar cycling effects in BiFeO3–BaTiO3 piezoelectric ceramics10
Normal Dirac semimetal phase and Zeeman-Induced topological Fermi arc in PtSr510
Anisotropic assembly and reorganization of noble metals on black phosphorus van der Waals template10
Chemical vapor deposition of graphene and its characterizations and applications10
Exploring critical behavioral differences in physical, structural, and nuclear radiation attenuation properties of produced High Entropy Alloy (HEA) and Refractory-High Entropy Alloy (RHEA) samples10
Fabrication of in situ alkali doped flexible CIGSSe solar cells by using aqueous spray deposition10
Methane steam reforming for eco-friendly H2 production using atmospheric-pressure microwave steam plasma10
Enhanced tunneling electroresistance through polarization-controlled band alignments in α-In2Se3-based ferroelectric tunnel junctions10
An overview of tin based perovskite solar cells: Stability and efficiency10
Exploring interfacial stability for Zr-doped sulfide solid electrolyte with first-principle calculation10
Optimization of metal-insulated-semiconductor field-effect-transistor for the formation of two-dimensional electron gas in dopant-free systems10
The electrical properties of Highly flexible ion gel capacitor based on PVDF10
Integration of transition metal dichalcogenides with perovskite oxide for electronic applications10
Editorial Board10
Transient heat-flux method for measuring heat capacity: Examples from Cu and VO29
Multifunctional optoelectronic element based on n-InSe layered semiconductor doped with rare-earth elements9
Editorial Board9
Assessment of g‒Mg3N2 membrane performance for efficient removal of dioxane contaminant from wastewater: DFT‒MD simulation treatments9
Evaluation of physicochemical properties of zinc oxide and indium-tin oxide nanoparticles for photocatalysis and biomedical activities9
Size-controlled synthesis of ZnO tetrapods using atmospheric pressure microwave plasma jets and application in NH3 gas detection9
Effect of Bi(Zn1/2Nb2/5)O3 addition on phase transition and energy storage properties of BaTiO3 ceramics9
Photocarrier generation mechanism of graphene-based field effect device9
TRANSFERLESS soft-lithography for the fabrication of peristaltic micropump with dome-shape membrane9
Stacking-dependent Van Hove singularity shifts in three-dimensional charge density waves of kagome metals AV3Sb5 (A = K, Rb, Cs)9
Comparative morphological analysis of electrospun PAN/PVDF nanofibers for waterproof breathable membrane applications9
White upconversion emission and color tunability of Y2O3:R(R=Yb3+, Er3+, Tm3+) nanophosphors9
Magnetocaloric effect in Y-doped La0.6Ca0.4MnO3 enhanced by Griffiths phase and re-entrance of first-order phase transition9
RETRACTED: Study of CoCe0.05Fe1.95O4-polypyrrole composite for efficient electromagnetic interference shielding9
Pulse program for improving learning accuracy and reducing programming energy consumption of ferroelectric synaptic transistor9
Crystal-liquid interfacial free energy and thermophysical properties of refractory Mo, Nb and Ta pure metal elements9
Influence of the synthesis method on the microstructural properties of Ta modified AgNbO3 ferroelectric thin films9
Solution processable visible-light and color-selective image sensor with a ZnO/QDs/ZrO2 sandwich structure9
Nanostructured bismuth oxide for enhanced diagnostic X-ray shielding: A comparative study9
Electrochemical, Photocatalytic and Photoluminescence properties of BaWO4 and rGO-BaWO4 nano-composites: A Comparative study9
Simple 4-segment thermal cycling pyroelectric measurement protocol for differentiating between ferroelectric and non-ferroelectric materials9
High magnetic susceptibility-based vanadate tellurite glasses for magneto-optical device applications9
Effect of catalytic graphitization on the electric heating performance of electroless nickel-coated carbon fibers9
Spin glass behavior and critical analysis across the magnetic phase transition in Gd2CoMnO6: dc magnetization and ac susceptibility study9
Editorial Board9
The plasma path development model (PPDM) in rocks during rock breaking by high-voltage pulse discharge8
Carrier concentration dependence of optical and magnetic properties in epitaxial manganese-doped indium tin oxide films with different manganese concentrations8
A comprehensive numerical study of bilayer SnSe/SnS absorber based solar cells8
Investigating textural fractals in Bougainvillea petals for wettability and biomimetic surface design8
Tunable electron scattering mechanism in plasmonic SrMoO3 thin films8
Preparation and mechanism investigation of highly sensitive humidity sensor based on Ag/TiO28
Optical susceptibility of metal nanoparticle-double quantum dot hybrid system8
Molecular simulation investigations on the coating of Al-alloy surface by nano-SiO2-epoxy composite8
Advanced spectroscopic methods for probing in-gap defect states in amorphous SiNx for charge trap memory applications8
Investigations of thermoelectric properties of different gallium nitride polytypes through first-principles approach8
Rapid YFeO3 gas sensor for detecting formaldehyde working at room temperature8
Improved ultraviolet resistant through the natural antioxidants in efficient perovskite photovoltaics8
Effect of proton irradiation on interfacial and electrical performance of N+Np+ InP/InGaAs hetero-junction8
Effective method for measuring structural influence through changes in droplet spreadability8
Revisiting LaMnO3: A density functional theory study8
Design and validation of impedance probe for platform-independent ionospheric plasma diagnostics8
Effects of PEDOT:PSS and crystal violet interface layers on current-voltage performance of Schottky barrier diodes as a function of temperature and variation of diode capacitance with frequency8
Swelling modification by electron beam at chalcopyrite copper indium gallium diselenium thin-film controlled optical features8
Simultaneous three-channel measurements of hydrogen diffusion with light intensity analysis of images by employing webcam8
Thermal curing of interface defects at a-si:H/c-Si in heterojunction with intrinsic thin layer (HIT) solar cell processing8
Phase transformation and magnetocaloric properties of Ni–Co–Mn–In alloy particles fabricated by conventional ball milling8
Growth of epitaxial Bi0.5(Na1-K )0.5TiO3 films by hydrothermal reaction time and their characterization8
The effect of temperature on the electrical characteristics of Ti/n-GaAs Schottky diodes8
WS2–graphene heterostructures with hydrogen-controlled morphology: Interfacial charge transfer and negative photoresponse7
Enhancements of luminescence properties of Gd3+-sensitized perovskite CaZrO3:Eu3+ phosphors7
Accurate and efficient electronic structure calculations of semiconductor heterostructures using GGA-1/2 formalism7
Realization of diode structures on paper: An example of papertronics7
One-pot synthesis of size-controlled Fe3O4 microclusters: Preserving superparamagnetism at microscale7
Thermoelectric properties of extrinsic phase mixing in chalcogenide bulk nanocomposites7
Development of sheared and ultra-pure DNA thin films prepared by ultrasonication and purification7
Converting of the 2D graphene to its 3D by chicken red blood cells as sheets separator for construction supercapacitor electrode7
Optical and luminescent characteristics of thermally stable new Eu3+ doped potassium tungstate tellurite glasses for epoxy-free luminescent devices7
Spin-orbit torque with spin and orbital generation in Pt, Mn, and Pt0.5Mn0.57
A facile planar memristor based on CsBi4Te6 with asymmetric metal contacts7
First-principles investigation of V2CSe2 MXene as a potential anode material for non-lithium metal ion batteries7
Reconstructed nano-titanyl phthalocyanine for high-performance photodetection7
Enhanced charge transport behaviors of single-walled carbon nanotube transistors by phenylphosphonic acid doping7
MoS2 sensitized tapered fiber optic evanescent wave sensor for refractive index based glucose sensing application7
Editorial Board7
First-principles theory-based design of highly reflective metals for radiative cooling7
Electronic structure, phonon stability, mechanical and high-temperature thermoelectric properties of Li-based quaternary Heusler alloys7
La3+ doped at A-position improves the energy storage density of BNT-based lead-free energy storage ceramics7
Effect of long-term natural aging on the microstructural characteristics of an extruded WE54 alloy7
Fire-resistant layered carbon composite panels from used cotton cloth for thermal insulation and EMI shielding applications7
Solvent–precursor interaction engineering for formamidinium-based perovskites: Role of dimethylacetamide, N-methyl-2-pyrrolidone, and methylammonium chloride in film formation and device performance7
Biexciton binding energy in CH3NH3PbBr3 as determined by multiphoton photoluminescence excitation spectroscopy7
Design and performance analysis of smart photonic sensors for industrial applications7
Thickness dependence of surface Rashba spin-momentum coupling7
Progress of quantum entanglement in a trapped-ion based quantum computer7
Enhancing the thermal stability of active contacts in AlGaN/GaN high electron mobility transistors with chemical vapor deposited carbon (C) films7
Soft X-ray spectroscopy study of Fe impurities in Mn 7
An exchange bias observed in Tb/Cr/FeCo trilayers with ultrathin Cr layer at low temperature7
Atomic arrangement of van der Waals heterostructures using X-ray scattering and crystal truncation rod analysis7
Enhancing photocatalytic performance of SnO2/ZnS nanocomposites synthesized via dual-step precipitation and ultrasonicated hydrothermal route7
Preface to the special issue of ICAMD20237
Cu and Mn centered nicotinamide/nicotinic acid complexes for interlayer of Schottky photodiode7
0.11315512657166