Journal of Electroanalytical Chemistry

Papers
(The TQCC of Journal of Electroanalytical Chemistry is 12. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-08-01 to 2025-08-01.)
ArticleCitations
Detection of vitamin C in various falsified oral formulations using voltammetry118
Facile synthesis of cobalt-doped sodium lithium manganese oxide with superior rate capability and excellent cycling performance for sodium-ion battery93
Short communication: Stockwell transform as an alternative method for the corrosion rate evaluation of 6061-T6 aluminum alloy82
Editorial Board81
Electrode polarization in the presence of a first order ionic trapping reaction79
Editorial Board78
Enhancing the sensitivity towards iodide detection by coupling SECM and an EĆ catalytic mechanism76
Investigation into the suitability of screen printed graphene-melanin pH sensors for use in bacterial culturing applications75
Derivatization-free Ru(bpy)32+ electrochemiluminescence detection of gramine74
Surface roughness-controlled foam-like GaN fabricated by the change H2O concentration in ionic liquid etchant solution via photoelectrochemical etching73
Comparison between polycrystalline Au and single-crystalline Au(1 1 1) electrodes as the substrate of a cationic organic monolayer based on their anion dependent redox activities71
Corrigendum to “Co-doped hollow nanospheres with low Pt loading for electrocatalytic oxygen reduction and zinc-air batteries” [J. Electroanal. Chem. 967(2024) 118449]66
Retraction notice to “4-dimethylaminopyridine: Discovery of a co-reactant system providing outstanding and reliable emission in electrochemiluminescence” [J. Electroanal. Chem. 921 (2022) 116507]66
Electrochemical study of the reactivity of furfural and 5-hydroxymethylfurfural with aliphatic primary (di)amines66
Bimetallic alloy nanoparticles embedded in N-doped carbon-based as an anode for potassium-ion storage material65
Construction of metal (oxy) hydroxides surface on high entropy alloy as lattice-oxygen-participated electrocatalyst for oxygen evolution reaction64
Boosting polysulfide capture and redox conversion by functional separator combined with porous hosts for advanced Li-S batteries64
W/Ni3(PO4)2@NC/NF nanorods via electrodeposition with carbonization as a bifunctional catalyst for electrocatalytic water splitting62
Distinguishability of Battery Equivalent-Circuit Models Containing CPEs: Updating the Work of Berthier, Diard, & Michel62
AGNES in irreversible systems: The indium case61
CO2 electrocatalytic reduction on Cu nanoparticles loaded on nitrogen-doped carbon61
Erratum to “Electrochemical dissolution behavior and characterisation of passivation films of PH13-8Mo in NaNO3” [J. electroanalytical chemistry 981 (2025) 119004]60
Inhibition of microbiologically influenced corrosion of Al alloy 5083 in the presence of Pseudomonas aeruginosa by Artemisia annua L58
Detailed investigation the impact of biofilm formation and cathode limitations on electrochemical performance of biofuel cell57
Development of rapid and efficient enterovirus typing and classification platform for real-time diagnostics56
A dual-carbon encapsulation architecture boosted charge transfer and cycling stability of sodium vanadium/manganese phosphate cathode for sodium-ion batteries55
Enhanced lithium storage performance derived from Fe2Ti1-xNixO5 (0 ≤ x ≤ 0.1) as a fast charging anode55
Photoelectrochemical determination of Pb2+ by combined electrochemical-chemical precipitations of PbI2 films53
CuO quantum dots embedded Cu3(BTC)2/CuO sugar gourd-like nanoarrays on copper foil as free-standing anodes for lithium-ion batteries with boosted performance52
A label-free photoelectrochemical sensor based on BiVO4@graphene oxide hybrid for analysis of the antioxidant capacity in food51
Study on effect of chloride ions on corrosion behavior of reinforcing steel in simulated polluted concrete pore solutions by scanning micro-reference electrode technique51
Conformal thioaluminate/aluminate polymer protective layer enables dendrite-free lithium metal batteries51
An automated and lightweight framework for electrolyte diagnostics using quantitative microelectrode voltammetry50
CoTe2 encapsulated in N-doped carbon nanonecklace as an anode for sodium-ion batteries49
Electrochemical sensing of copper-chelator D- penicillamine based on complexation with gold nanoparticles modified copper based-metal organic frameworks48
Transition metal atom anchored by defective WSSe monolayer as bifunctional single atom catalyst for ORR and OER48
Electrodeposition of Cu-based nanoarrays with tailored hierarchical nanostructure and their application for electrochemical nitrate sensing46
Study on Nickel-induced 1T/2H MoS2 nanostructures in realizing efficient electrocatalysts for hydrogen evolution reaction45
Electrochemical identification of hazardous phenols and their complex mixtures in real samples using unmodified screen-printed electrodes45
Reduction of Ag+ irreversibly adsorbed on cyanide-modified Pt(111)45
PtNi nanoparticles embedded in Ni-MOF-on-Zn-MOF derived carbon nanosheets for enhanced hydrogen evolution45
Preparing a graphene/carbon nanotube coated hollow nickel phosphides microsphere anode with high stability for high-performance lithium/sodium battery45
Electrochemical noise comparative study of pitting corrosion of 316L stainless steel fabricated by selective laser melting and wrought45
Designing of Fe- ZIF67 derived Fe-Co/NC with its reduced graphene oxide-based composites for hydrogen and oxygen evolution reaction43
Tri-metallic fluoride nanoplates immobilized on reduced graphene architectures as efficient oxygen evolution reaction catalyst43
Electrochemical sensor based on a glassy carbon electrode modified with a 3D carbon nanoporous composite for the detection of paracetamol in pharmaceutical samples43
Bromide crossover through various perfluorinated cation-exchange membranes in the presence of two cationic components in solution43
The oxidation of ferrocene in sessile toluene macro- and microdroplets: An opto-electrochemical study42
An insight into synergistic effects of In2O3 and ZnO nanoparticles co-deposited on TiO2 nanotubes for a photoanode with enhanced photoelectrochemical performance42
The steady-state diffusional flux to isolated square cuboids in solution and supported on an inert substrate42
Conversion of toxic waste to wealth: Diesel soot carbon electrode for sodium-hybrid capacitor42
Porous CeO2/Ni-Cu composite catalyst for electrocatalytic hydrogen evolution in alkaline medium42
Cobalt(II)-complex modified Ag electrode for efficient and selective electrochemical reduction of CO2 to CO41
Enhanced photoactivity of Bi2S3 nanoflowers by CS-AgBr and CeO2: Application in photoelectrochemical biosensor for the effect of antibiotics on N6-methyladenosine in rice tissues41
Self-supporting CuM LDH (M = Ni, Fe, Co) carbon cloth electrodes for selective electrochemical ammonia oxidation to nitrogen41
Electrochemical deposition of Si nano-spheres from water contaminated ionic liquid at room temperature: Structural evolution and growth mechanism41
SnO2/Bi2O3/NF heterojunction with ordered macro/meso-pore structure as an advanced binder-free anode for lithium ion batteries40
Galvanic corrosion behavior between ADC12 aluminum alloy and copper in 3.5 wt% NaCl solution40
Determination of the recombination coefficient in electrolytic solutions from impedance spectroscopy measurements40
Iron-doped nickel cobalt oxide nanorods composited with nitrogen and sulfur co-doped reduced graphene oxide for electrocatalytic oxygen evolution reaction40
A new FeS2/N-C nanoparticle from NH2-MIL-101 for high performance lithium ion batteries39
Design of CoP-CoO heterostructure to enhance the polysulfide redox conversion for lithium-sulfur batteries39
Revealing the phase evolution and lithium diffusion in the liquid Sn-Sb electrode39
Deposition of Cu on Ni3S2 nanomembranes with simply spontaneous replacement reaction for enhanced hydrogen evolution reaction39
High-performance capacitive deionization using 3D porous Ti3C2T with improved conductivity38
A novel coral-like LiMn2O4 nanostructure as Li-ion battery cathode displaying stable energy-storage performance38
Advances in MXene-based photoanodes for water-splitting38
Micro-meso porous biocarbons derived from a typical biopolymer with superior adsorption capacity for methylene blue dye and high-performance supercapacitors38
Innovative electrochemical sensor for the precise determination of the new antiviral COVID-19 treatment Favipiravir in the presence of coadministered drugs38
A surface network based on oxidative graphene oxide for the determination of hydroquinone and catechol in ground and wastewater samples38
Electrochemical oxidation of hydroquinone using Eu-doped PbO2 electrodes: Electrode characterization, influencing factors and degradation pathways37
Calcination process of porous metal–organic frameworks derived from nickel sulfide composites for supercapacitor and computer vision for investigating the porosity-electrochemical correlation37
Portable and ultrasensitive detection of traces of water in alcoholic solvents by a polypyrrole-modified screen-printed electrode37
Periodic reverse electrodeposition of (1 1 1)-oriented nanotwinned Cu in small damascene SiO2 vias37
Electrochemical activation of CoMo LDH nanosheets driving surface reconstruction for enhanced hydrogen evolution37
Water-soluble biowaste gum binders for natural graphite anode for lithium-ion batteries37
The role of lithium, perchlorate and water during electrochemical processes in poly(3,4-ethylenedioxythiophene) films in 37
Atomic layer deposition of NiO-Coated CNT nanocomposites: Tailoring electrochemical properties for salivary lactate detection37
Room-temperature fabrication of a heterostructure Cu2O@CuO nanosheet electrocatalyst for non-enzymatic detection of glucose and H2O237
Synergistic effect of trimetallic doping and π-π conjugation in NiZnCo-ZIF@HHTP for efficient oxygen evolution reaction36
Sensitive simultaneous determination of catechol and hydroquinone based on iron and nitrogen doped carbon nanonets derived from MOFs36
Formation of hollow spheres structures Co/CoO/ZnO@NC from metal-organic frameworks as a anode for lithium-ion batteries36
An emerging machine learning strategy for electrochemical sensor and supercapacitor using carbonized metal–organic framework36
A simple and low-cost portable potentiostat with real-time data sharing for wireless electrochemical analyses35
Accurate ion type and concentration detection using two bare electrodes by machine learning of non-faradaic electrochemical impedance measurements of an automated fluidic system35
A nanostructure based voltammetric platform constructed with carbon nanofibers and erbium nanoparticles for the determination of yohimbine and its DNA binding35
Simple Cu2+ modification significantly improves the electrochemical performance of MXene (Ti3C2Tx) in aluminum batteries35
Surface reconstruction of NiFe layered double hydroxides by S2- corrosion for efficient oxygen evolution35
Dendritic Fe2O3 single crystal for high performance lithium-ion batteries by turning the concentration of the iron source35
Three-dimensional Ni-MoN nanorod array as active and non-precious metal electrocatalyst for methanol oxidation reaction35
Effect of fluoroethylene carbonate additive on the low–temperature performance of lithium–ion batteries35
Versatile porous nanomaterials for electrochemiluminescence biosensing: Recent advances and future perspective35
Iridium oxide nano-needles using electrodeposition for highly stable and sensitive pH sensor35
Enhancing supercapacitor performance with binder-free cobalt sulfide pseudo-capacitive electrodes: A path to sustainable energy storage34
MOF-derived CoP3/FeP on nitrogen-doped carbon nanoarray boosted high-performance hydrogen evolution34
High-entropy selenide catalyst for degradation of organic pollutants34
Co/N nanoparticles supported on a C3N4/polydopamine framework as a bifunctional electrocatalyst for rechargeable zinc-air batteries34
Synthesize of NiSe2/Mo-MOF nanocomposite for sensitive determination of antiretroviral agent dolutegravir in pharmaceutical formulations and biological fluids33
Fabrication of 3D interconnected porous MXene-based PtNPs as highly efficient electrocatalysts for methanol oxidation33
A binder-free copper sulfide cathode material for aluminum-ion batteries33
Fluorine tin oxide-supported copper nanofilms as effective and selective de-nitration electrocatalysts33
CoTe nanorods based electrochemical sensor for quantitative detection of albumin from chronic kidney disease patients33
Microwave-assisted preparation of carbon coating layer on raspberry-shaped iron oxide particles for lithium-ion battery anodes33
Melt-diffused binary solid–solid ionic mixture in a porous polymeric host as free-standing solid electrolyte for lithium batteries32
Quenching-assisted surface functionalization of metal oxide for highly enhanced electrocatalytic urea oxidation32
Corrigendum to “Defects-engineered build in a Molecule-Based trinuclear iron cluster material as anode materials for lithium-ion batteries” [J. Electroanal. Chem. 980 (2025) 118990]32
A highly stable insertion type V1-xTixP solid solution as an anode material for high-rate lithium-ion batteries32
Passive direct methanol fuel cells acting as fully autonomous electrochemical biosensors: Application to sarcosine detection32
Electrocatalytic and photoelectrocatalytic investigation of Orange G degradation utilizing a novel BHP@Bi2O3 photoanode employing the CCD-RSM experimental design31
Tracking activity behavior of oxygen evolution reaction on perovskite oxides in alkaline solution via 3-dimensional electrochemical impedance spectroscopy31
Enhancement of polypyrrole electrochemical performance with graphene quantum dots in polypyrrole nanoparticle/graphene quantum dot composites31
Synthesis of novel α-cyclodextrin conjugated ZnFe2O4-GO nanocomposites for electrochemical detection of hazardous imidacloprid insecticide and enhanced photodegradation of levofloxacin drug31
Electrochemical properties and analytical advantages of potassium-selective sensor with tungsten trioxide solid contact31
Comparative study on pilot-scale production of CuO-loaded activated biochar and hydrochar from oil-palm empty fruit bunches for high-performance symmetric supercapacitor application31
Amperometric ammonia sensors for low detection limit with BaZr(1-x)YxO3-δ proton electrolytes31
Hollow Cobalt Selenide-Carbon polyhedron sandwiched between reduced graphene oxide nanosheets: A superior anode material for lithium-ion batteries31
Identification and quantification of the distributed capacitance and ionic resistance in carbon-based supercapacitors using electrochemical techniques and the analysis of the charge-storage dynamics30
Characterization of self-assembled Bis[2-(2-bromoisobutyryloxy) undecyl] disulphide (DTBU) on gold surfaces suitable for use in surface-initiated atom transfer radical polymerization (SI-ATRP)30
Monodispersed nickel phosphide nanocrystals in situ grown on reduced graphene oxide matrix with excellent performance as the anode for lithium-ion batteries30
Modeling ‘dry’ OCP measurements to characterize archaeological iron corrosion II: Short-time transients30
Oxygen vacancy defects enable high performance V2O5 cathode for aqueous zinc batteries: A mini review30
Editorial Board30
Long-life SnS/TiO2/C stemming from nano-TiO2 @C complex hull as Li-ion battery anode30
Microwave-assisted hydrothermal synthesis of a high-voltage microcube LiMn1.5Ni0.5O4−δ spinel cathode material30
Selectivity and activity trends of single-phase copper-tin foam electrocatalysts in CO2 electroreduction reaction30
Coupling of chrysanthemum-shaped cobalt hydroxide and nitrogen-doped carbon dots for high-performance hybrid supercapacitors30
Editorial Board30
Capacitive label-free ultrasensitive detection of PSA on a covalently attached monoclonal anti-PSA antibody gold surface30
MIP sensor made using multi-current step electro-polymerization method on framed Ag-SPE for glutamic acid enantiomer recognition30
Hydrothermally reduced graphene oxide as a sensing material for electrically transduced pH sensors29
Porous and defective NiCo2O4 spinel derived from bimetallic NiCo-based Prussian blue analogue for enhanced hydrogen production via the urea electro-oxidation reaction29
p-Phenylenediamine electrochemical oxidation revisited: An insight into the mechanism and kinetics in acid medium29
A Ti3C2 modified single electrode electrochemical system for the gold nanoprism-enhanced ECL detection of HER229
Electrochemical oscillations during the oxidation of 2-(dimethylamino)ethanethiol29
A flow cell-based electrochemical system and isotherm-based linear interpolation for the determination of additive concentrations in Cu-Plating baths29
A dual optimization approach for photo-electric catalysis: Heterojunction of BiOBr/Ba0.7Sr0.3TiO3 system construction and ferroelectric polarization29
Confined Pt and M (M = Fe, Co) nanoparticles on NC with ultralow Pt loading for oxygen reduction reaction29
Mass spectrometry insight into the electro-copolymerization mechanism of aniline with o-phenylenediamine28
CoMn2O4 nanoparticles supported on defect-rich N-doped carbon nanotubes as air electrode in rechargeable zinc-air batteries28
Convergent paired electrochemical synthesis of symmetric dispiro and spiropyrimidine derivatives based on reduction of para-nitrophenol28
Electrode pretreatment cycles for suppressing self-discharge of electrochemical double-layer capacitors28
Dual-potential ECL system based on cucurbit[6]uril enhanced anodic luminol emission and cathodic g-C3N4 emission and its sensing application for glucose28
Rapid and straightforward electrochemical approach for the determination of the toxic food azo dye tartrazine using sensors based on silver solid amalgam28
Developing a high-performance aqueous zinc battery with Zn2+ pre-intercalated V3O7·H2O cathode coupled with surface engineered metallic zinc anode28
Second harmonic generation as a probe of structure and dynamics of ionic liquids at the electrode interface28
Enhanced electrochemical performance of Na4MnCr(PO4)3@C cathode by multi-walled carbon nanotubes interconnection for Na-ion batteries28
In situ one-step electrochemical preparation of mesoporous molecularly imprinted sensor for efficient determination of indole-3-acetic acid28
Investigating the viability of electrochemiluminescence for archaeological material Analysis: A pilot study28
Dynamic electrochemical impedance spectroscopy for the charge transfer rate measurement of the ferro/ferricyanide redox couple on gold27
One-step synthesis of dendritic nanostructured single crystal NiSe electrocatalyst for hydrogen evolution reaction27
The effect of MOx (M = Zr, Ce, La, Y) additives on the electrochemical preparation of tungsten in eutectic Na2WO4–WO3 melt27
Electrodeposition of nanoporous nickel selenide on graphite rod as a bifunctional electrocatalyst for hydrogen and oxygen evolution reactions27
Oxygen vacancies and Bi2S3 nanoparticles co-sensitized TiO2 nanotube arrays for enhanced photoelectrochemical sensing of chlorpyrifos27
Multiwalled carbon nanotubes decorated ɛ-MnO2 nanoflowers cathode with oxygen defect for aqueous zinc-ion batteries27
Application of self-adapting regularization, machine learning tools and limits in Levenberg–Marquardt algorithm to solve CNLS problem27
Tracking the electrocatalytic activity of Au@Ag core–shell nanoparticles for nitrite oxidation via single-entity electrochemistry27
Efficient degradation of ibuprofen by electro-Fenton with microtubular gas- diffusion electrodes synthesized by wet-spinning method27
An investigation on the multiple roles of CeO2 nanoparticle in electrochemical sensing: Biomimetic activity and electron acceptor27
Polymerase incorporation of Cy5 modified 2′-deoxyuridine-5′-triphosphate into double- and single-stranded DNA for direct electrochemical detection27
Quantum capacitance of supercapacitor electrodes based on M2C MXenes with pure -O and mixed termination: A first-principles study27
Graphene oxide supported SnO2-WO3 nanocomposite as electrode material for lithium-ion batteries and battery-type supercapacitor27
Revealing the surface modification effect on Li-ion insertion into Ni-rich NCM cathode material by cyclic voltammetry27
Synthesis of porphyrin-based metal-organic framework and biomass-derived carbon composite for electrochemical detection of Rutin27
Studying ion transport dynamics in electrochemical measurements of lateral flow assays27
Unveiling novel capacity (electro)recovery for Chloranilate-based alkaline redox flow batteries27
Hollow NiCoSe2/C prepared through a step-by-step derivatization method for high performance supercapacitors27
Enhanced cathode performance in lithium–sulfur batteries: Graphene-supported N-doped carbon nanotubes with cobalt encapsulation27
A low-fouling and reusable biosensor for the sensitive electrochemical assay of tuberculosis gene27
Synthesis of polypyrrole nanotubes@nickel-molybdenum sulfide core–shell composites for aqueous high-performance asymmetric supercapacitors27
Recent trends, perceptions and applications of microbial bioelectrochemical systems: An innovative technology27
Study of Cr2O3 nanoparticles supported on carbonaceous materials as catalysts for O2 reduction reaction27
Facile one-pot preparation of porous SiOx@Li2SiO3/C composite from rice husks for high initial coulomb efficiency lithium-ion battery anodes26
Real-time monitoring of chlorobenzene gas using an electrochemical gas sensor during mediated electrochemical degradation at room temperature26
VFe@Ni/Ni3N Mott-Schottky heterojunction induced electronic modulation for efficient alkaline water splitting26
Facile synthesis of nitrogen- and phosphorus-Co-doped porous carbon nanosheets embedded with FeP clusters for the oxygen reduction reaction using rechargeable zinc-air batteries26
Synergistic effect of two complexing agents on the hydrothermal synthesis of self-supported ZnNiCo oxide as electrode material in supercapacitors26
Synthesis and electrochemical behavior of K+ and Mn2+ co-doped LiFePO4/C as a cathode material for lithium-ion batteries and the mechanism of modification26
Fractal growth behavior of chromium during metal electrodeposition26
Cathodic co-reactant electrogenerated chemiluminescence of water-soluble heteroleptic iridium(III) complexes bearing N-methyl(pyridyl)pyridinium cyclometalating ligands26
Passivation phenomenon and variable properties of ytterbium in different Lewis acid AlCl3-NaCl melts26
High-performance supercapacitors using carbon dots/titanium dioxide composite electrodes and carbon dot-added sulfuric acid electrolyte26
Heterostructured microspheres of MOF-derived (Zn,Mn)S/C coated manganese sulfide for aqueous zinc ion batteries26
Accurately prepared the large-area and efficiently 3D electrodes for overall seawater splitting26
Investigation of poly(3,6-dioxa-1,8-octane-dithiol)-based organosulfur polymer as the positive electrode material in rechargeable Li-S battery26
Core/shell NiMoSe@NiMoO4 micro-cuboids anchored on Nickel foam as self-supported electrode towards efficient and stable hydrogen generation26
Bimodal analysis of intracellular in situ self-assembled Au complexes based on single-cell electrochemistry26
Highly luminescent nitrogen doped graphene quantum dots sensitized TiO2 nanorod arrays for enhanced photoelectrochemical performance26
Synthesis of Ni(OH)2/CuO via diaphragm glow discharge plasma for highly sensitive non-enzymatic glucose sensor26
Effect of nutrient concentration on corrosion mechanism of X80 pipeline steel caused by sulfate-reducing bacteria26
A novel electrochemical acetaminophen sensor based on multiwalled carbon nanotube and poly(neutral red) modified electrodes with electropolymerization in ternary deep eutectic solvents26
1T-MoS2 grown on amorphous carbon-coated carbon nanotubes for high-performance lithium-sulfur batteries26
Inhibiting dendrite growth of electrodeposited zinc via an applied capacitor26
Electrochemical formation of Sn films on copper by overpotential and underpotential electrodeposition in deep eutectic solvents26
Modelling and experimental validation of polarization behavior of airbreathing microfluidic fuel cell using some common fuels: Methanol, ethanol and sodium borohydride26
Investigational undertaking descriptors for reduced graphene oxide-phthalocyanine composite based catalyst for electrochemical oxygen evolution reaction25
Enhancing Mg2+ intercalation in MnO2/carbon composites via vanadium doping and oxygen vacancies for high-performance aqueous magnesium-ion batteries25
Investigating enhanced OER activity through novel MnMoSe2/ppy composite material in alkaline medium25
F-doped Co3O4/carbon composite catalyst for alkaline oxygen evolution25
Electrochemical behavior and separation of ytterbium from NaCl-CaCl2 molten salt by reactive electrodes25
Combination of porous structure and MnO2 modification for improving capacitance of planar BDD electrode25
Graphite carbon nitride-based metal-free bifunctional electrocatalysts for anion exchange membrane water electrolyzer25
Editorial Board25
Tailored design of Ni(OH)2 nanocages internally decorated with CuS nanocages to mutually ameliorate electrocatalytic dynamics for highly sensitive glucose detection25
Cycling performance and failure behavior of lithium-ion battery Silicon-Carbon composite electrode25
Hydrothermally synthesized a pyrochlore-type bismuth stannate (Bi2Sn2O7): Efficient electrochemical detection of nitroxoline25
The effect of ammonium citrate on CoP/CC morphology and its electrocatalytic hydrogen evolution performance25
Research progress on metallic Ni-based catalysts for electrolytic oxygen evolution reaction25
Electrochemical determination of melatonin using disposable self-adhesive inked paper electrode25
Electrokinetic analysis of water oxidation on alumina supported silver oxide nanopowders25
Template-free synthesis of M/g-C3N4 (M = Cu, Mn, and Fe) porous one-dimensional nanostructures for green hydrogen production25
Evaluation of Nb-Doping on performance of LiNiO2 in wide temperature range25
Dialysis membranes as liquid junction materials: Simplified model based on the phase boundary potential24
Editorial Board24
Cement mortar cracking under accelerated steel corrosion test: A mechanical and electrochemical model24
An electrochemical route to a tetracyclic dimer through the anodic oxidation of 3-(4-fluorophenyl)-2-methyl-[1,2a] benzimidazolo-1, 3, 5-triazin-4-thione24
Sulfur-doped enhanced ZnMn2O4 spinel for high-capacity zinc-ion batteries: Facilitating charge transfer24
Detection of hydrogen peroxide with low-dimensional silver nanoparticle-decorated PPy-C/TiO2 nanocomposites by electrochemical approach24
Enhanced ionic conductivity of Cu-doped NASICON solid electrolyte for solid-state sodium batteries24
Electrocatalytic activity of bimetallic PtPd on cerium oxide-modified carbon nanotube for oxidation of alcohol and formic acid24
Effect of Pt-Ni deposition sequence on the bimetal-modified boron-doped diamond on catalytic performance for glucose oxidation in neutral media24
Regulating the Zn electrode/electrolyte interface with lactose additive for high performance Zn anode24
Pt nanoparticles in polyelectrolyte multilayers: Polymer effects on the electrocatalytic activity for methanol oxidation24
Constant phase element affected by ion transport in nanoporous electrodes24
Electrochemical oxidation of ATMP (Amino Trimethylene Phosphonic Acid) in low-concentrated acidic electrolyte on graphite and glassy carbon electrodes using cyclic voltammetry24
Synthesis of highly crumpled carbon-graphene composite for adsorption-controlled potassium-ion anode materials24
Editorial Board24
Direct electrochemistry & enzyme characterization of fresh tobacco RNA24
Editorial Board24
Effect of deposition potential on electrodeposition of Sn-Ag-Cu ternary alloy solderable coating in deep eutectic solvent24
Fe3C nanoparticles decorated 3D nitrogen-doped carbon foam as a highly efficient electrocatalyst for nitrate reduction to ammonia24
Editorial Board24
Ag decorated porous Si structure as potential high-capacity anode material for Li-ion cells24
Dynamic rotation featured translocations of human serum albumin with a conical glass nanopore24
FeN4- and CoN4-centered transition metallomacrocyles as highly efficient non-noble metal electrocatalysts for oxygen reduction reaction24
Editorial Board24
3D nanoporous core-shell ZnO@Co3O4 electrode materials for high-performance supercapacitors and nonenzymatic glucose sensors24
The optimization of iron porphyrin@MOF-5 derived Fe N C electrocatalysts for oxygen reduction reaction in zinc-air batteries24
Enhancing catalytic efficiency: InSe quantum dots’ role in hydrogen evolution reaction24
Construction of Ce-MOF@COF hybrid nanostructure with controllable thickness for the electrochemical sensitive detection of metol24
Rotten albumen derived layered carbon modified separator for enhancing performance of Li-S batteries24
Electrochemical impedance analysis of the charge transfer mechanism on Li4Ti5O12 surface in the presence or absence of the solid/electrolyte interface film24
A novel electrochemical sensor for detection of cysteine based on a Methacrylic Ester compound probe23
2D coordination unsaturated Ni-MOFs hierarchical nanosheets with internal electric fields for high-performance hybrid supercapacitors23
Corrosion evolution of Cu-Pb alloys from the Western Zhou Dynasty in simulated archaeological soil environment23
Hierarchical nanowires of MoS2@transition metal sulfide heterostructures for efficient electrocatalytic hydrogen evolution reaction23
High performance in water splitting(OER) mediated by porphyrin coupled with Polyoxometalates in COF: A breakthrough in electrocatalysis23
Insight into the galvanic corrosion behavior of the LHE Cd-Ti 300 M steel coupled with TC4 titanium alloy in different atmospheric environments23
Crystallinity-controlled oxygen vacancies of SmMn2O5 as an oxygen reduction catalyst for Zn-air battery23
Construction of 3D Co/Co9S8 encapsulated by graphite carbon for high performance supercapacitor23
Prospects of MXenes/graphene nanocomposites for advanced supercapacitor applications23
0.18107509613037