Materiali in Tehnologije

Article	Citations
EFFECT OF ULTRASONIC PROCESSING ON THE PROPERTIES OF ULTRAFINE-GRAINED BRASS	27
CORROSION BEHAVIOR OF HRB 400 REINFORCING STEEL WELDING JOINT IN SIMULATED CONCERT ENVIRONMENT BASED ON SVET	19
DISPERSION OF AQUEOUS Y2O3 NANO-SUSPENSION AND FABRICATION OF TRANSPARENT CERAMICS BY COLLOIDAL PROCESSING	12
HOT DEFORMATION BEHAVIOR AND PROCESSING MAP OF A Mg-Gd-Y-Zn-Zr ALLOY	10
ENHANCED GLASS-JUTE EPOXY HYBRID COMPOSITES REINFORCED WITH EGGSHELL NANOPARTICLES FOR SUSTAINABLE HIGH-PERFORMANCE ENGINEERING APPLICATIONS	5
EFFECT OF A MAGNETIC FIELD ON THE MICROSTRUCTURE AND PROPERTIES OF RESISTANCE SPOT WELDED JOINTS OF 444 FERRITIC STAINLESS STEEL/6082 ALUMINUM ALLOY	5
TRIBOLOGICAL AND MECHANICAL CHARACTERIZATION OF AL6060/SI3N4/BN HYBRID ALUMINIUM METAL MATRIX COMPOSITES	5
APPLICATION OF ATOMIC FORCE MICROSCOPY IN PREPARED Ni-Al LAYER BY A TWO-STAGE PROCESS	5
DEVELOPMENT OF A PNEUMATIC, ARTIFICIAL-MUSCLE- BASED PRESS FOR PUNCHING THIN METAL SHEETS	4
A NOVEL METHOD FOR SELECTING THE OPTIMAL EDM PROCESS FOR HASTELLOY B2 USING THE MODIFIED-ADDITIVE RATIO ASSESSMENT METHOD (M-ARAS) BASED ADAPTIVE NEURO FUZZY INFERENCE SYSTEM (ANFIS)	4
EFFECT OF THICKNESS REDUCTIONS ON MICROSTRUCTURE AND NANO-MECHANICAL PROPERTIES OF AZ31 MAGNESIUM ALLOY IN FLOW-FORMING	4
A SINGLE-LAYER FSS FOR S-, C-, X-, KU- AND K-BAND APPLICATIONS	4
INVESTIGATION OF THE EFFECT OF INCONEL PARTICULATE FILLER ON THE MECHANICAL AND FIRE-RETARDANT CHARACTERISTICS OF GFRP COMPOSITES	4
DYNAMIC COMPRESSIVE PROPERTIES OF ALUMINIUM-MATRIX COMPOSITES REINFORCED WITH SiC PARTICLES	4
DEVELOPING A NUMERICAL MODEL TO OPTIMISE THE LASER-BEAM-WELDING PARAMETERS FOR JOINING TITANIUM TUBES	4
EFFECT OF DIFFRENT LOADS ON THE WEAR BEHAVIORS OF 5Cr5Mo2V STEEL AT 700 °C	4
WARM DEFORMATION BEHAVIOR OF A 65MN SPRING STEEL	4
EFFECTS OF PRE-OXIDATION ON HOT CORROSION RESISTANCE OF Al–Si COATINGS	3
EVALUATION OF THE MAGNETIC PROPERTIES OF Ag-Au-Pd-Cu DENTAL ALLOYS	3
CHARACTERIZATION OF CHEMICALS FROM PROSOPIS JULIFLORA (PJ) – A POTENTIAL ENHANCER FOR LIGHTWEIGHT POLYMER APPLICATIONS	3
OPTIMIZATION OF TRIBOLOGICAL PROPERTIES OF AN EPOXY HYBRID POLYMER COMPOSITE REINFORCED WITH ZrB2 AND PTFE PARTICLES USING RESPONSE SURFACE METHODOLOGY FOR HIGH-TEMPERATURE TRIBOLOGICAL APPLICATIONS	3
CORROSION BEHAVIOUR OF ADDITIVELY MANUFACTURED METALLIC MATERIALS	3
THE EFFECT OF ALLOYING ADDITIVES AND PROCESS PARAMETERS ON THE SOLIDIFICATION CHARACTERISTICS OF THE ALUMINIUM ALLOY AlSi7Mg0.3	3
EXPERIMENTAL STUDY ON THE DYNAMIC SHEAR MODULUS AND DAMPING RATIO OF SATURATED SAND UNDER CYCLIC LOADING	3
EXPERIMENTAL AND NUMERICAL INVESTIGATION OF EPOXY HYBRID POLYMER COMPOSITE REINFORCED WITH ZrB2 AND PTFE PARTICLES USING A PIN-ON-DISC TRIBOMETER	3

FINITE ELEMENT SIMULATION OF THERMAL PROPERTIES OF COATED GRAPHITE FLAKE/ALUMINUM MATRIX COMPOSITES	2
SOLAR TECHNOLOGY: EMPOWERING SERBIA’S RENEWABLE ENERGY FUTURE	2
THE EFFECT OF SILICON-CARBIDE ADDITIONS ON THE MECHANICAL AND THERMAL CONDUCTIVITY PROPERTIES OF FIBER-REINFORCED EPOXY COMPOSITES	2
UNRAVELLING THE TRIBOLOGICAL BEHAVIOUR OF MERCERIZED COCONUT INFLORESCENCE FIBER FORTIFIED UNSATURATED POLYESTER COMPOSITES	2
EFFECT OF FIBER-LAYER POSITIONS ON MECHANICAL PROPERTIES OF CARBON FIBER REINFORCED MATERIALS MANUFACTURED BY FUSED DEPOSITION MODELING	2
SURFACE MODIFICATION OF MAGNESIUM FOR BIOMEDICAL APPLICATIONS: COMPARATIVE ANALYSIS OF PLASMA TREATMENT, LASER TEXTURING AND SANDBLASTING	2
EFFECT OF SOLUTION TREATMENT ON THE MICROSTRUCTURE AND MECHANICAL BEHAVIOR OF THE NICKEL-BASED ALLOY N06625	2
MICROSTRUCTURE EVOLUTION AND PHASE TRANSFORMATIONS IN MICROALLOYED ARMOX 500T STEEL DURING A DILATATION PROCESS	2
EFFECTS OF PRE-OXIDATION ON HOT CORROSION RESISTANCE OF Al–Si COATINGS	2
BORIDE LAYER GROWTH KINETICS ON X90CrMoV-18 STEEL	2
NbC-BASED CERMET PRODUCTION COMPARISON: L-PBF ADDITIVE MANUFACTURING VERSUS CONVENTIONAL LPS POWDER METALLURGY	2
A STUDY ON SOUND-ABSORPTION ABILITY OF CLOSED-CELL ALUMINIUM FOAMS	2
EXPERIMENTAL STUDY OF THE CHLORIDE-ION PERMEABILITY OF BAMBOO-FIBER-REINFORCED CONCRETE	2
MEASUREMENT OF BASIC HEMODYNAMICS DURING MULTIPOST TRANSCUTANEOUS EXTERNAL EAR STIMULATION: A TWO-CASE STUDY	2
BIO-PRINTING OF FEMUR MODEL: A BONE SUBSTITUTE FOR BIOMEDICAL RESEARCH	2
SYNTHESIS, CHARACTERIZATION OF CeO2@Ag HOLLOW SPHERES AND EVALUATION OF THEIR CATALYST ACTIVITY FOR THE REDUCTION OF 4-NP	1
INVESTIGATION OF Ni-P COATED BAMBOO FIBRE/NANO-TiO2 POLYESTER MATRIX COMPOSITE PROPERTIES	1
RESIDUAL STRESS MODELING AND ANALYSIS IN AISI A2 STEEL PROCESSED BY AN ELECTRICAL DISCHARGE MACHINE	1
MECHANICAL TESTING OF LAMINATED COMPOSITE MATERIALS FOR PROSTHETIC SOCKETS	1
EFFECT OF A MAGNETIC FIELD ON THE MICROSTRUCTURE AND PROPERTIES OF A 22MnB5-CP780 WELDED JOINT	1
DRY-SLIDING WEAR RESISTANCE OF AISI H11-TYPE HOT-WORK TOOL STEEL	1
EFFECTS OF HOT-ROLLING PROCESSES ON THE FRACTURE BEHAVIORS AND MECHANICAL PROPERTIES OF 2009Al/SiCp METAL MATRIX COMPOSITES	1
RESEARCH ON PAVEMENT PERFORMANCE OF WATERBORNE EPOXY RESIN-MODIFIED EMULSIFIED ASPHALT BINDERS AND POTHOLE REPAIR MATERIALS	1
EFFECT OF CYCLIC NaCl SOLUTION IMMERSION CURING ON THE MECHANICAL PROPERTIES OF PLAIN CONCRETE	1
COMPONENT OPTIMIZATION OF g-C3N4/TiO2 HETERO- STRUCTURE COMPOSITE AND ITS ACTIVITY ENHANCEMENT FOR PHOTOCATALYTIC DEGRADATION OF RHODAMINE B	1
EXPERIMENTAL STUDY ON THE FACTORS AFFECTING THE INSULATION PERFORMANCE OF FLAME-RETARDANT MULTILAYER INSULATION MATERIALS	1
COMPOSITION DESIGN OF 316LN AUSTENITIC STAINLESS STEEL FOR LIQUID-HYDROGEN STORAGE BASED ON HIGH-FLUX PREPARATION	1
STUDY OF THE SUITABILITY OF VARIOUS TYPES OF CASTING MATERIALS FOR THE MANUFACTURE OF A SHIP ENGINE	1
THERMODYNAMIC PROPERTIES OF CaO-SiO2-MgO-Al2O3-B2O3 SLAG SYSTEMS AT 1773 K	1
DIELECTRIC LOSS OF Si2N2O AND THE INFLUENCE OF Li ON ITS PROPERTIES	1
CORROSION BEHAVIOUR OF ANNEALED 42CrMo4 STEEL	1
MICROSTRUCTURE EVOLUTION AND CORROSION BEHAVIOR OF Al-Si/Al-Mn COMPOSITES IN SALT SPRAY	1
SYNTHESES AND CHARACTERISTICS OF CALCIUM-BASED GEOPOLYMER FROM SOLAR-CELL PANEL-GLASS WASTE BY HYDROTHERMAL METHOD	1
COMPARATIVE STUDY OF THE RECOMBINANT ACTIVITY EFFECT AT THE GRAIN BOUNDARIES IN SILICON SOLAR CELLS	1
COLD ROLL FORMING SIMULATION AND ORTHOGONAL EXPERIMENTAL OPTIMIZATION OF SPIRAL CORRUGATED STEEL TUBES	1
EFFECT OF UPSETTING-EXTRUSION-UPSETTING ON THE RECRYSTALLIZATION OF AN Mg-9Gd-4Y-2Zn-0.5Zr ALLOY	1
HARD MACHINING OF P235GH STEEL WITH DIFFERENT PARAMETERS USING GSRS MODELLING	1
INFLUENCE OF TEMPERATURE ON THE INTERACTION KINETICS BETWEEN MOLTEN ALUMINIUM ALLOY AL99.7 AND TOOL STEEL H11	1
ASSESSMENT OF WEAR AND CORROSION RESISTANCE IN TiC AND WC COATINGS APPLIED TO AISI 1040 FORGED STEEL VIA ELECTROSPARK DEPOSITION	1
FAILURE ANALYSIS OF CARBIDE TWIST-DRILL BIT FOR SMALL-SCALE GRANITE DRILLING	1
RECENT PROGRESS IN OXIDE-DISPERSION-STRENGTHENED (ODS) ALLOYS PRODUCED BY ADDITIVE MANUFACTURING	1
EFFECT OF MAGNETRON SPUTTERING POWER ON THE MICROSTRUCTURE AND HYDROGEN RESISTANCE OF CrN COATINGS APPLIED WITH THE MAGNETRON SPUTTERING METHOD	1
EFFECT OF ALKALINE SOLUTION CONCENTRATION ON THE PASSIVATION FILM OF Cu-Ni ALLOY	1
EFFECT OF INCLUSIONS ON THE SOFTENING MECHANISM OF Al 1235 ALLOY DURING THERMAL DEFORMATION	1
PREPARATION AND PROPERTIES OF NICKEL-PLATED ALUMINUM POWDER	1
THERMAL-DEFORMATION MODEL OF A Sr-MODIFIED A356 ALUMINUM ALLOY	1
EFFECT OF THE MQL TECHNIQUE ON CUTTING FORCE AND SURFACE QUALITY DURING THE SLOT MILLING OF TITANIUM ALLOY	1
THE EFFECT OF CORROSION ON THE DYNAMIC BEHAVIOUR OF AISI 4140, AISI 4340, AND AISI 5140 STEELS EXPOSED TO 3.5 wt.% NaCl ENVIRONMENT	1
A NOVEL HYBRID DECISION-MAKING MODEL: FUZZY AHP-TOPSIS APPROACH FOR PRIORITISING COPPER SMELTING PROCESSES	1
INFLUENCE OF SPRAY DISTANCE ON THE POROSITY OF Ni-BASED AMORPHOUS COATINGS: NUMERICAL SIMULATION AND EXPERIMENT	1

INVESTIGATION OF THE MECHANICAL AND TRIBOLOGICAL BEHAVIOURS OF CUPOLA SLAG AND MWCNT-REINFORCED EPOXY HYBRID NANOCOMPOSITES: A SUSTAINABLE APPROACH FOR ENVIRONMENTAL PRESERVATION	1
STUDY OF THE CORROSION PROCESS OF A PEO-TREATED ALUMINUM ALLOY IN DIFFERENT CONCENTRATIONS OF NaCl	1
NUMERICAL MODEL FOR OPTIMIZING THE PARAMETERS FOR LASER-BEAM WELDING OF A HIGH-TEMPERATURE MATERIAL	1
A EFFECT OF CeO2 DOPING ON THE MICROSTRUCTURE AND CORROSION BEHAVIOR OF CoCuNiTi HIGH-ENTROPY ALLOY COATINGS	1
SHORT-FATIGUE-CRACK GROWTH-RATE MODELING BASED ON THE J-INTEGRAL AS THE CONTROLLING PARAMETER	1
EFFECT OF TOOL PIN PROFILES OVER SQUARE WAVE TOOL PATH PATTERN ON FRICTION STIR WELDING OF AA6061-CU DISSIMILAR ALLOYS	1
FABRICATION AND PROPERTIES OF HIGH-CHROMIUM CAST IRON DISPERSED STEEL MATRIX COMPOSITE	1
MODELING OF THE TOOL LIFE FUNCTION OF A HOB MILLING TOOL USING GENETIC PROGRAMMING	1
PROPERTIES OF HIGH-CHROMIUM CAST IRON/LOW-CARBON STEEL BIMETAL FABRICATED BY HOT-ROLLING	1
CHARACTERISTICS OF BYZANTINE-PERIOD LIME MORTARS AND PLASTERS FROM THE ANAIA CHURCH	1
INVESTIGATION OF THE WEAR-RESISTANCE CHARACTERISTICS OF ALUMINA-ZIRCONIA-TITANIA-COATED AL-6061 ALLOY FOR DIFFERENT PROCESSING PARAMETERS	1
CHARACTERISATION OF CONCRETE FROM THE RUPNIK MILITARY LINE	1
A REVIEW OF MEASURING THE GELATION TIME IN UNSATURATED POLYESTER RESINS	1
CTAB-ASSISTED SYNTHESIS OF MONODISPERSE SPHERICAL LiCO3 MICROCRYSTALS WITH AN ION-EXCHANGE METHOD	1
PROGRAM AND BOOK OF ABSTRACTS	1
PREPARATION AND PROPERTIES OF SiO2/Ag MICROBEADS USING ELECTROLESS PLATING METHOD	1
INVESTIGATION OF THE FACTORS AFFECTING THE STRENGTH OF A METAL-RUBBER INTERFACE JOINED BY VULCANIZATION: A REVIEW	1
The INFLUENCE OF THE HOT-ROLLING TECHNIQUE FOR EN AW-8021B ALUMINIUM ALLOY ON THE MICROSTRUCTURAL PROPERTIES OF A COLD-ROLLED FOIL	1
COMPARISON OF NITROGEN-DOPED PHOTOCATALYTIC SURFACES SYNTHESIZED BY PVD AND SOL-GEL METHODS	1
SIMULATION OF HIGH-TEMPERATURE CORROSION BEHAVIOR OF Ti6Al4V ALLOY IN MARINE ENVIRONMENTS	1
SEVERE METALLOSIS AFTER POLYETHYLENE LINER DISLOCATION IN CERAMIC-ON-Ti6Al4V TOTAL HIP ARTHROPLASTY. A CASE STUDY	1
FAILURE ANALYSIS OF A TRACTOR FRONT AXLE	1
EXPERIMENTAL STUDY OF THE EFFECT OF FINE AGGREGATE IN PERVIOUS CONCRETE	1
EXPERIMENTAL INVESTIGATION OF GREEN CONCRETE USING BOVINE FAECES ASH AND NON-DEGRADABLE PLASTIC WASTE MATERIALS	1
1370 Development and Characterization of Poly (methyl methacrylate) / Hydroxyapatite Bio-composites Treated with Antimicrobial Agent as a Bone Analogue Material	1
PREPARATION AND PROPERTY OF Ni/Ag-Cu POWDER COMPOSITE CONDUCTIVE PASTE	1
SYNTHESIS AND PHOTOLUMINESCENCE PROPERTIES OF ELLIPSOIDAL La2O2SO4:Eu3+ PHOSPHORS	1
NON-DESTRUCTIVE TESTING OF CIPP DEFECTS USING A MACHINE LEARNING APPROACH	1
ADHESIVE-STRENGTH ASSESSMENT OF LIME INJECTION GROUT USING STANDARDISED AND MODIFIED TEST METHODS	1
INFLUENCE OF NICKEL ON THE MICROSTRUCTURAL EVOLUTION AND MECHANICAL PROPERTIES OF LM6-ALLOY-BASED FUNCTIONALLY GRADED COMPOSITE TUBES	0
EFFECT OF Zr, Zn AND Cu ADDITIONS ON ELEVATED-TEMPERATURE MECHANICAL PROPERTIES OF AS-EXTRUDED Mg-3Sn-1Ca ALLOY	0
LOAD INFLUENCE ON THE FRICTION AND WEAR BEHAVIOR OF ARC ION PLATED CR COATINGS	0
EXPERIMENTAL INVESTIGATION OF ELECTRICAL DISCHARGE MACHINING OF INCONEL 718 USING A TiB2-Cu SINTERED COMPOSITE ELECTRODE	0
LASER DRILLING OF AIR-FILM COOLING HOLES IN AIR AND WITH COAXIAL WATERJET ASSISTANCE	0
THE INFLUENCE OF Nb, Ta AND Ti MODIFICATION ON HOT-WORK TOOL-STEEL GRAIN GROWTH DURING AUSTENITIZATION	0
EFFECT OF CONCENTRATION AND TEMPERATURE ON THE RHEOLOGICAL BEHAVIOR OF HYDROXYLETHYL CELLULOSE SOLUTIONS	0
EFFECT OF Y ON THE MECHANICAL PROPERTIES AND CORROSION RESISTANCE OF AS-EXTRUDED Mg-4Sn ALLOYS	0
MICROSTRUCTURE CHARACTERISATION OF THE LASER-HYBRID-WELDED ALUMINIUM ALLOY EN AW-5454-D	0
ADSORPTION OF LEAD FROM CONTAMINATED WATER USING BIOSORBENT	0
LASER SURFACE TEXTURING TO IMPROVE THE TRIBOLOGICAL PROPERTIES OF Ti ALLOYS	0
EFFECTS OF ALLOYING ELEMENTS AND SURFACE PROPERTIES ON THE CORROSION BEHAVIOR OF HVOF-DEPOSITED WC COATINGS	0
EVALUATION OF A HYBRID BIOCOMPOSITE OF HA/HDPE REINFORCED WITH MULTI-WALLED CARBON NANOTUBES (MWCNTs) AS A BONE-SUBSTITUTE MATERIAL	0
EFFECT OF HEAT TREATMENT ON THE MICROSTRUCTURE AND PERFORMANCE OF HIGH-VELOCITY AIR-FUEL SPRAYED WC-10Co4Cr COATINGS	0
NUMERICAL SIMULATION OF WC-Co PARTICLE DEPOSITION BY HVOF SPRAYING	0
STUDY OF THE PROPERTIES AND INTERFACIAL ENERGY OF GRAPHENE-MODIFIED ASPHALT BASED ON MOLECULAR DYNAMICS	0
CONTEMPORARY TECHNOLOGIES FOR THE MEASUREMENT OF PULPAL BLOOD PERFUSION IN TEETH	0
HYDROTHERMAL SYNTHESIS AND CHARACTERIZATION OF ZSM-5 ZEOLITE FROM ANORTHOSITE: IMPACTS OF REACTION TIME AND TEMPERATURE	0
OPTIMIZATION OF WELDING PARAMETERS OF ELECTRICAL RESISTANCE SPOT WELDED 6082-7075 ALUMINIUM JOINTS USING THE TAGUCHI METHOD	0
ANALYSIS OF TEMPERATURE DISTRIBUTION IN LASER ALLOYING OF PURE COPPER	0
PREDICTION OF MICROSTRUCTURE EVOLUTION OF 316LN AUSTENITIC STAINLESS STEEL USING CELLULAR AUTOMATA AND A NOVEL EVALUATION METHOD FOR GRAIN SIZE INHOMOGENEITY	0
PREPARATION AND HARDNESS OF A FUNCTIONALLY GRADED Ni-Al COATING	0
TAILORING SURFACE MORPHOLOGY AND TOPOGRAPHY OF SHOT-PEENED Ti6Al4V VIA GRIT BLASTING	0
EXPERIMENTAL INVESTIGATIONS ON TRIBOLOGICAL AND MECHANICAL BEHAVIOR OF CNTs/Al2O3/GNP REINFORCED EPOXY AND POLYAMIDE HYBRID NANOCOMPOSITES	0
MICROSTRUCTURE CHARACTERISTICS OF Cr3C2-NiCr COATINGS DEPOSITED WITH THE HIGH-VELOCITY OXY-FUEL THERMAL-SPRAY TECHNIQUE	0
A NEW TYPE OF PLUG-IN FRICTION-STIR LAP WELDING BASED ON THE 6061-T6 ALUMINUM ALLOY	0
ODVIJANJE PREJE S KRIŽNEGA NAVITKA	0
SPINODAL DECOMPOSITION OF PRECIPITATION HARDENING Fe-17Cr-4Ni-4Cu STAINLESS STEEL AT 475 °C	0
MAGNETIC PROPERTIES OF AS-CAST IRON-COBALT ALLOYS	0
HIGH-TEMPERATURE DEFORMATION BEHAVIOR AND HOT-PROCESSING MAP OF 25CrMo4 AXLE STEEL BASED ON FRICTION CORRECTION	0
EXPERIMENTAL STUDY OF THE LONG-TERM MECHANICAL PROPERTIES OF BFRP BARS IN A CORROSIVE ENVIRONMENT	0
EFFECTS OF THREE-DIMENSIONAL-PRINTED ZIRCONIA ALL-CERAMIC CROWNS ON PERIODONTAL HEALTH AND AESTHETICS OF PATIENTS RECEIVING ANTERIOR TOOTH AESTHETIC RESTORATION	0
CHARACTERIZATION OF DIFFERENT WC-Co CEMENTED-CARBIDE TOOLS	0
STUDY OF INTERFACIAL ADHESION OF PAVEMENT SEALANTS BASED ON MOLECULAR DYNAMICS	0
NUMERICAL ANALYSIS OF THE EFFECT OF HEAT INPUT IN THE SPOT WELDING OF DISSIMILAR MATERIALS	0
EXPERIMENTAL STUDY OF THE MECHANICAL PROPERTIES OF BRICKS MADE FROM DREDGED SILT	0
ADVANCED MATERIALS AND RESEARCH FOR THE GREEN FUTURE	0
STABILITY STUDIES OF COHESIVE SOIL WITH NANO MAGNESIUM AND ZINC OXIDE	0
CHARACTERIZATION OF LIME MORTAR AND PLASTERS OF FORTRESS CONCEPCION DE LA VEGA	0
EFFECT OF FRICTION-STIR-WELDING PARAMETERS ON THE WELDING MICROSTRUCTURE AND PROPERTIES OF 5083 AND 7075 ALUMINUM ALLOYS	0
EFFECT OF DIFFERENT APPLICATION PRESSURES ON ROTARY-FRICTION-WELDED AA2024-T6 JOINTS	0
COMPARISON OF CORROSION BEHAVIORS OF B1, BA11, BZ11 AND BC11 MAGNESIUM ALLOYS	0
OPTIMIZATION OF INJECTION MOLDING QUALITY BASED ON BP NEURAL NETWORK AND PSO	0
TWO-STEP SYNTHESIS AND FORMATION MECHANISM FOR LACUOS NANO-SIZED AGGLOMERATES	0
HIGH-TEMPERATURE OXIDATION BEHAVIOR OF AN N5 NANOCRYSTALLINE COATING DEPOSITED BY ESD ON A NI-BASED SINGLE-CRYSTAL SUPERALLOY	0
INTELLIGENT HYBRID OPTIMIZATION OF WEDM FOR Ti-6Al-4V USING TAGUCHI DEEP LEARNING AND ANOVA FOR ENHANCED SURFACE INTEGRITY AND PREDICTION ACCURACY	0
EXPERIMENTAL STUDY OF THE INTERNAL EROSION BEHAVIORS OF GRANULAR SOILS IN HORIZONTAL SEEPAGE	0
A NON-DESTRUCTIVE METHOD FOR EVALUATING THE ADHESION BETWEEN THE LAYERS OF METAL-POLYMER-METAL COMPOSITE MATERIALS	0
EFFECT OF SIMILAR ATOM SUBSTITUTION ON THE GLASS FORMING ABILITY OF Al86Ni9(Y, Sm)5 METALLIC GLASSES	0
MAGNETICALLY CONTROLLED GROWING RODS FOR THE TREATMENT OF EOS: EXPERIENCE FROM A SINGLE CENTER AND XPS SURFACE ANALYSIS OF THE RODS	0
POLYCENTRIC KNEE PROSTHESIS WITH CARBON FABRIC REINFORCED POLYMER: FABRICATION AND STRUCTURAL EVALUATION	0

OPTIMIZATION OF PROCESS PARAMETERS FOR A SOLID-STATE-WELDED AISI 430 STEEL JOINT WITH THE GRG REINFORCED RESPONSE SURFACE METHODOLOGY	0
EFFECT OF WELDING PARAMETERS ON MECHANICAL AND MICROSTRUCTURAL PROPERTIES OF COLD METAL TRANSFER-WELDED THIN SHEET AISI 301LN STAINLESS STEEL	0
WHITE-LAYER THICKNESS ON EDM-PROCESSED AISI A2 STEEL – MATHEMATICAL MODELING AND ANALYSIS	0
EFFECT OF Sc ON THE HYDROGEN-STORAGE PERFORMANCE OF Mg2Ni: A FIRST-PRINCIPLES STUDY	0
THERMAL-POWER-PLANT CONDENSER-TUBE CORROSION ANALYSIS	0
PREPARATION AND CHARACTERIZATION OF A CipHCl-PLA/PBC/CS COMPOSITE FIBER MEMBRANE FOR ANTIBACTERIAL WOUND DRESSING	0
EFFICIENCY OF THE PRODUCT-DEVELOPMENT PROCESS AS A FACTOR DETERMINING THE EFFECTIVENESS OF IMPLEMENTATION FOR SUBSEQUENT PROJECT PHASES ACC APQP	0
INFLUENCE OF DOPING WITH CARBON AND NITROGEN ON THE PHOTOACTIVITY OF TiO2 THIN FILMS OBTAINED WITH MePIIID	0
INFLUENCE OF VOLTAGE AND CURRENT ON THE ARC SHAPE IN CABLE-TYPE WIRE TIG-MIG HYBRID WELDING	0
4-TERT-BUTYLBENZOIC ACID-INCORPORATED POLYSTYRENE: AN EFFECTIVE CATION-EXCHANGE POLYMER MATRIX FOR THE REMOVAL OF METAL IONS FROM TANNERY EFFLUENT	0
OPTIMUM DESIGN OF A PERMANENT-MAGNET-BASED SELF-CHARGING DEVICE FOR A SMARTPHONE	0
STUDY OF DROPLET TRANSFER CHARACTERISTICS AND WELD FORMATION WITH ER430LNb FERRITIC STAINLESS STEEL DURING GAS METAL ARC WELDING	0
INFLUENCE OF MICROALLOYING AND THE THERMOMECHANICAL METHOD OF PROCESSING ON THE COMMINUTION OF THE COPPER STRUCTURE	0
POTENTIAL EFFECT OF UV RADIATION ON THE OPTICAL AND ANTI-MICROBIAL PROPERTIES OF PVA/METAL-SALT NANOCOMPOSITES	0
INFLUENCE OF TEMPERING TEMPERATURE ON THE MICROSTRUCTURE AND ULTIMATE TENSILE STRENGTH OF 28Cr3SiNiMoWV STEEL	0
A SULPHIDE CAPACITY PREDICTION MODEL OF BLAST FURNACE SLAG	0
N-DOPED POROUS CARBON DERIVED FROM A DEEP EUTECTIC SOLVENT AND ITS APPLICATION IN SOLID-PHASE EXTRACTION OF PROFENOFOS FROM FRUITS	0
PROGRAM AND BOOK OF ABSTRACT	0
PREPARATION OF ATO NANOPOWDERS WITH Co-PRECIPITATION AND THEIR LASER-REFLECTION PROPERTIES	0
MICROSTRUCTURE AND HIGH-TEMPERATURE WEAR BEHAVIOR OF FE-BASED AMORPHOUS COATINGS BY LASER CLADDING	0
HOT-COMPRESSION DEFORMATION BEHAVIOR AND CONSTITUTIVE EQUATIONS OF LZ50 AXLE STEEL	0
PREDICTION AND RESEARCH OF DYNAMIC RECRYSTALLIZATION EVOLUTION IN HADFIELD STEEL TURNOUT CORES	0
TEMPERATURE-INDUCED THICKNESS REDUCTION OF MICROMECHANICAL PROPERTIES OF Sn-0.7Cu SOLDER ALLOY	0
COMPARISON OF THE CORROSION PROPERTIES OF CoCrMo DENTAL ALLOYS IN ARTIFICIAL SALIVA	0
INFLUENCES OF BORON CARBIDE PARTICLES ON THE WEAR RATE AND TENSILE STRENGTH OF AA2014 SURFACE COMPOSITE FABRICATED BY FRICTION-STIR PROCESSING	0
English MODULATION OF MELATONIN SECRETION WITH TRANSCUTANEOUS AURICULAR NERVE STIMULATION: A CASE STUDY	0
MICROSTRUCTURAL ANALYSIS AND MECHANICAL PROPERTIES OF SISAL FIBRE IN HIGH-PERFORMANCE CONCRETE	0
TREATING WASTE SLUDGE FROM WATER-PURIFICATION PLANTS WITH THE GEOPOLYMERIZATION METHOD	0
ANALYSIS OF DAMAGE IN LOW-VELOCITY IMPACT-TESTED GFRP-ALUMINUM HONEYCOMB SANDWICH PANELS USING MATLAB	0
EFFECT OF Nb, Ta, AND Ti MICROALLOYING ON THE SECONDARY HARDENING OF Mo-W TOOL STEEL	0
ANALYSIS OF A CRYOGENICALLY COOLED NEAR-DRY WEDM PROCESS USING DIFFERENT DIELECTRICS	0
MICROSTRUCTURE EVOLUTION OF CORRUGATED INTERFACE 304/Q345R ROLLING-COMPOSITE PLATE	0
PICKLING – PASSIVATION MECHANISM AND PROCESS OPTIMIZATION OF Q235 STEEL PIPELINE	0
SHRINKAGE BEHAVIOR OF AN ECO-FRIENDLY ENGINEERED CEMENTITIOUS COMPOSITE	0
DEVELOPMENT OF REFRACTORY CONCRETE USING GLASS GRINDING WASTE SAND	0
CORROSION BEHAVIOR AND WETTING PROPERTIES OF CAST TNZT ALLOYS	0
WEAR MECHANISM FOR DEEP-WELLS DRILLING TOOLS	0
A SIMPLE STRUCTURED MULTIBAND TERAHERTZ METAMATERIAL ABSORBER WITH A HIGH Q FACTOR	0
STRUCTURAL AND ELASTIC PROPERTIES OF AgNi10 ALLOY STUDIED WITH AB-INITIO CALCULATIONS	0
EFFECT OF STEEL’S THERMAL CONDITION ON THE TRANSFORMATION TEMPERATURES OF TWO HOT-WORK TOOL STEELS WITH INCREASED THERMAL CONDUCTIVITY	0
EXPERIMENTAL INVESTIGATION OF CONCRETE WITH RECYCLED TYRE-RUBBER WASTE AS FINE AGGREGATE MATERIAL	0
PREPARATION AND ANTIBACTERIAL PROPERTIES OF CEFTAZIDIME-LOADED POLYCAPROLACTONE COATING/NANO-LITHIUM MAGNESIUM SILICATE-DOPED BIOACTIVE GLASS THREE-DIMENSIONAL SCAFFOLDS	0
EFFECT OF COOLING RATE ON THE MICROSTRUCTURE AND MECHANICAL PROPERTIES OF SOLUTION-TREATED Mg-9Gd-4Y-2Zn-0.5Zr ALLOY	0
PROGRAM AND BOOK OF ABSTRACTS ICM&T 2023	0
INVESTIGATION INTO THE THERMAL DEFORMATION BEHAVIOR AND THE ESTABLISHMENT OF A CONSTITUTIVE RELATIONSHIP FOR Mn-Cr-Ni-Mo STEEL	0
INTEGRITY ASSESSMENT OF AN AIRCRAFT CYLINDER ASSEMBLY WITH A CRACK	0
CORROSION BEHAVIOUR OF DIFFERENT METALLIC MATERIALS FOR BIOMEDICAL APPLICATIONS	0
CORROSION AND PROTECTION OF NON-PATINATED, SULPHIDE- AND CHLORIDE-PATINATED BRONZE	0
RESEARCH STATUS AND PROSPECTS FOR TIG-MIG HYBRID-ARC-WELDING TECHNOLOGY	0
NUMERICAL INVESTIGATION OF HVAF-SPRAYED Fe-BASED AMORPHOUS COATINGS	0
ENHANCING THE MECHANICAL, THERMAL AND ELECTRICAL PROPERTIES OF ALUMINA-MWCNT HYBRID NANOFILLER REINFORCED EPOXY COMPOSITES	0
EFFECT OF HEAT TREATMENT ON METALLURGICAL AND MECHANICAL PROPERTIES OF AN ALUMINIUM 6061 HYBRID COMPOSITE	0
CHARACTERISATION OF NON-METALLIC INCLUSIONS IN Pb-Ca-Sn ALLOYS	0
EFFECTS OF DIFFERENT LOADING DIRECTIONS ON THE ORGANIZATION AND PROPERTIES OF MAGNESIUM SINGLE CRYSTALS BASED ON MOLECULAR DYNAMICS	0
EVOLUTION OF MICROSTRUCTURE AND EMBRITTLEMENT DURING THE TEMPERING PROCESS IN SiCrCu MEDIUM-CARBON STEELS	0
RESEARCH ON MATERIAL FLOW-STRESS BEHAVIOR AND THE DIE-FORGING PROCESS FOR FORGED-STEEL BRAKE DISCS FOR HIGH-SPEED TRAINS	0
STUDYING THE STRENGTH OF DISSIMILAR JOINTS OF AISI 430 AND 301 STAINLESS STEEL WELDED AT DIFFERENT WELDING PARAMETERS	0
STUDY ON THE CORROSION RESISTANCE OF HOMOGENEOUS Mg-1Bi-0.5x (x=Nd,Ce,La) ALLOYS	0
ROLE OF OLIVINE AGGREGATE IN LIME AND CEMENT MORTARS FOR THE SEQUESTRATION OF ATMOSPHERIC CO2	0
EFFECT OF NITROGEN ON THE THERMAL DEFORMATION BEHAVIOR OF MARTENSITIC STAINLESS BEARING STEEL	0
EFFECT OF HIGH-INTENSITY ULTRASONIC TREATMENT ON REFINEMENT OF Al-5Cu ALLOY INGOTS	0
A CONTEMPORARY REVIEW OF THE ADVANCEMENTS IN JOINING TECHNOLOGIES FOR BATTERY APPLICATIONS	0
CORRECTION OF FLOW CURVES AND CONSTITUTIVE MODELING OF AN AS-CAST N06625 NICKEL-BASED ALLOY	0
OPTIMIZING WELD QUALITY IN DISSIMILAR STAINLESS STEEL JOINTS FOR INDUSTRIAL APPLICATIONS	0
INVESTIGATION OF THE BENDING BEHAVIOR OF INC625/SUS316L LASER-CLADDING LAYERS APPLIED TO GGG40	0
SINTERING BEHAVIOUR OF MAGNESIUM OXIDE OBTAINED FROM SEAWATER DOPED WITH NANO-TiO2	0
INFLUENCE OF Ce ADDITION ON THE MICROSTRUCTURE AND HOT-PROCESSING MAPS OF Mg-1Ca-0.5Mn ALLOYS	0
EFFECT OF TEMPERATURE ON MgO ACTIVITY IN THE CaO-SiO2-MgO-Al2O3 SYSTEM MEASURED BY MOLTEN TIN	0
INFLUENCE OF A TOOL’S ROTATIONAL SPEED ON THE MECHANICAL PROPERTIES OF FRICTION-STIR-WELDED JOINTS OF DISSIMILAR AA6082 AND AA5052 ALUMINIUM ALLOYS	0
INFLUENCE OF ARTIFICIAL SALIVA AND ESSENTIAL OIL-BASED SOLUTIONS ON THE ELECTRICAL PARAMETERS OF NITINOL AND STAINLESS STEEL ARCHWIRES	0
CARBURIZING-QUENCHING HARDNESS MODEL ANALYSIS AND COMPARISON	0
CHARACTERISTIC OF XONOTLITE SYNTHESIZED BY HYDROTHERMAL REACTION USING RICE HUSK ASH AND ITS APPLICATION TO ABSORB CHROME (III) SOLUTION	0
EFFECT OF LONG-TERM THERMAL AGING AT 475 °C ON EMBRITTLEMENT OF Fe-32Cr-4Ni-4Cu MODEL ALLOY	0
PERFORMANCE OF AN EPOXY-FILLER-MODIFIED BAMBOO-REINFORCED CONCRETE SLAB	0
EFFECTS OF TEMPERATURE AND STRAIN AMPLITUDE ON LOW-CYCLE FATIGUE PROPERTIES OF NICKEL-BASED SINGLE-CRYSTAL SUPERALLOY DD419	0
EFFECT OF Sn ON CORROSION PROPERTIES OF HOMOGENIZED Mg-6Zn-0.25Ca MAGNESIUM ALLOY	0
MECHANICAL BEHAVIOUR OF INFLORESCENCE/GLASS-FIBRE-REINFORCED HYBRID EPOXY COMPOSITES	0
DEVELOPMENT OF THE RECYCLING PROCEDURE FOR RAPID ANTIGEN TESTS	0
GENETIC ALGORITHM-BASED OPTIMIZATION OF THE LASER-BEAM PATH IN ADDITIVE MANUFACTURING	0
EFFECT OF PULSE DURATION ON THE PROPERTIES OF LASER-WELDED GLASS JOINTS	0
STUDY OF A MODIFIED MELAMINE SPONGE AND ITS LIPOPHILIC AND HYDROPHOBIC PROPERTIES	0
NUMERICAL AND EXPERIMENTAL INVESTIGATIONS ON GFRP AND AA 6061 LAMINATE COMPOSITES FOR DEEP-DRAWING APPLICATIONS	0
EVALUATION OF SECONDARY ALUMINIUM DROSS IN CALCIUM ALUMINATE CEMENT	0
NUMERICAL SIMULATION OF DYNAMIC MECHANICAL PROPERTIES OF GRAPHENE-REINFORCED ALUMINUM MATRIX COMPOSITES	0
PREPARATION OF Mg-6Zn AND A STUDY ON ITS RESISTANCE-SPOT WELDING MICROSTRUCTURE AND MECHANICAL PROPERTIES	0
MODIFIED DESIGN STRUCTURE OF A METAMATERIAL MICROSTRIP PATCH ARRAY ANTENNA FOR RF ENERGY OPTIMIZATION	0
COMPARISON OF POWDER-BED FUSION, DIRECTED-ENERGY DEPOSITION AND HYBRID ADDITIVE MANUFACTURING OF Ti6Al4V COMPONENTS: MICROSTRUCTURE, CORROSION AND MECHANICAL PROPERTIES	0
SOLVOTHERMAL SYNTHESIS AND CHARACTERIZATION OF POROUS Co MICROSPHERES	0
EFFECT OF A SCANDIUM ADDITION ON ANODIZING AlMg ALLOYS	0
CEMENT COMPOSITES WITH THE ADDITION OF PHASE-CHANGE MATERIALS AS INNOVATIVE CONSTRUCTION MATERIALS FOR MAINTAINING A PLEASANT LIVING ENVIRONMENT	0
EXPLORING THE MECHANICAL PROPERTIES OF LEAF SPRINGS REINFORCED WITH FIBRE COMPOSITES	0
EXPERIMENTAL STUDY ON MAG WELDED E350 HSLA STEEL JOINTS	0
MODELING OF THE CUTTING FORCES IN END MILLING OF A METALLIC MULTILAYER MATERIAL	0
MEASUREMENT OF ADHESION PROPERTIES OF Ni2Al3 COATING WITH A MICRO SCRATCH TESTER AND AUTOMATIC SCRATCH TESTER	0
EFFICIENT PRODUCTION OF SMALL-SIZED SiO2 NANOPARTICLES AND THEIR APPLICATION IN A WATERBORNE ACRYLIC-AMINO VARNISH	0