Metals and Materials International

Article	Citations
Effect of Ultrasonic Vibration Treatment on Microstructure and Properties of Semi-Solid SnSbCu11-6 Alloy	81
Phenomenological Modeling of Distortions and Residual Stresses in Direct Energy Deposition of AISI M4 High Speed Tool Steel on D2 Substrate	71
Variant Selection Behavior of Acicular Ferrite for Low-Carbon, Nb-bearing Ferrous Alloy Under Isothermal Transformation	68
Application of Various Nitriding Processes to Improve the Electrical Resistance of Al-Added 52100 Bearing Steel	58
Effects of Quenching Methods and Aging Processes on the Crushing Properties and Microstructure of Al–Zn–Mg Alloy Thin-Walled Square Extrusions	49
Characterization and Microstructure of Recycled Eroded Particles from Die-Sink Electro Discharge Machining of H11 Alloy for Applicability in Additive Manufacturing	44
A New Digital Image Correlation Method for Measuring Wide Strain Range True Stress–Strain Curve of Clad Materials	44
Effect of Silicide and α2 Phase on the Creep Behavior of TC25G Alloy at High Temperature	39
Distribution of Bi–MnS Inclusions Existing in 1215MS Steels: Correlation with Thermal Physical Coefficient	38
Effect of Heterogeneous Lamella Structure on Mechanical Properties of Double-Pass Friction Stir Processed Cu–30%Zn Alloy	37
Study on Structural Variation of Sn–20% Pb Alloy Melt Subjected to Ultrasonic Vibration: An Electrical Characterization	35
Effects of Brazing Temperature on Microstructure and High-Temperature Strength of Joints Using a Novel Fourth-Generation Nickel-Based Single Crystal Superalloy	34
Enhancing the High Temperature Tensile Strength of Fe36Ni36Cr10Mo1Al17 Alloy by Substituting Al with Si	32
Effects of the Alloy Design and Fabrication Process on Mechanical Properties of Mo + V-Added SA508 Gr.1A Steel for Main Steam Line Piping in Nuclear Power Plants	31
Effect of Rolling and Artificial Aging Treatment on the Microstructure and Mechanical Properties of a 2195 Al–Li Alloy by Ultrasonic Casting	30
Ancillary Processes for High-Quality Additive Manufacturing: A Review of Microstructure and Mechanical Properties Improvement	30
High Strength-Elongation Balance in Warm Accumulative Roll Bonded AA1050 Sheets	30
Microstructural Evolution and Mechanical Properties of Laser Beam Welded AlxCoCrFeNi High Entropy Alloys	30
Effect of Co Content on Properties of Fe-B-Nb-Y Bulk Metallic Glasses	29
Grain Refinement of CoNiCrMo Non-equiatomic Medium Entropy Alloy	28
Effect of Mo Additions on the Physical, Mechanical and Corrosion Properties of Commercially Pure Ti Fabricated by Metal Injection Moulding	28
Influence of Isothermal Precision Forming on Crystal Phases, Recrystallization Behavior and Mechanical Properties of Profiled Thin-Walled Forgings with High Ribs	28
Impact of Gold Ions on Nanohardness and Various Characteristics of G-metal Alloy Surface	27
Shot-Peening Time Effect on the Mechanical Properties of AISI 4340 Steel	26
Microstructure, Mechanical Properties, Wear Performance and Magnetic Susceptibility of Ti-35Nb-15Zr (at%) Alloy Fabricated by Laser Powder Bed Fusion	25

Microstructural Characterization and Investigation on Corrosion Properties of Mg-Zn-RE-Ca Alloy as a Possible Biomedical Implant	25
Evaluation of Microstructure, Residual Stress, and Mechanical Properties in Different Planes of Wire + Arc Additive Manufactured Nickel-Based Superalloy	25
HVOF Spray Performance Optimization Analysis and Experimental Research of WC–12Co Coating on Ti Alloy	24
Effects of Carbon Allotrope Type on Microstructural and Electrochemical Properties of Ni-C Nanocomposite Coating Prepared by Pulse-Reverse Electrodeposition Method	24
Mathematical Simulation of Decarburization with CO2 Injection During RH Refining of Ultra-Low-Carbon Steel	24
Effect of Ce Microalloying on Microstructure and Mechanical Properties of Extruded Mg–10Gd–0.5Zr Alloy	24
Characterizations of Hydrogen Absorption and Surface Properties of Ti0.2Zr0.2Nb0.2V0.2Cr0.17Fe0.03 High Entropy Alloy with Dual Phases	24
Hot Deformation Behavior and Recrystallization Mechanism in an As-Cast CoNi-Based Superalloy	24
Microstructural Evolution and Mechanical Behavior of Additively Manufactured 316 L Subjected to Varied Deformation Directions	23
Assessment of Phase Transformations in Binary Fe–Mn Alloys: Effects of Composition and of Plastic Strain	23
Inclusion Characteristics and Acicular Ferrite Formation in the Simulated Heat-Affected Zone of Ti-Zr-Killed Low-Carbon Steel	23
Mechanical Stability of Retained Austenite and Texture Evolution in Additively Manufactured Stainless Steel	22
Cooperative Deformation Behavior and Microstructure Evolution of High-Strength Titanium-Clad Steel Plate During Thermal Compression	20
Investigation of the Role of Non-octahedral Slip Planes in Tensile Deformation Behaviour of Naturally Aged Aluminium 6061 Alloy	20
Correction to: Microstructural and Wear Behaviour of Al 6063–W Nanocomposites Developed Using Friction Stir Processing	20
Existence of Partially Degenerate Electrical Transport in Intermetallic Cu2SnSe3 Thermoelectric System Sintered at Different Temperatures	20
Experimental Study of Dissimilar Double Pulse Resistance Spot Welded Austenitic Stainless Steel and Weathering Steel	20
Effect of Post-Manufacturing Heat Treatment on Wear Performance of Laser Powder Bed Fusion 316L Stainless Steel Under Various Normal Loads	19
Effects of Reduction Partitioning in Two-Stage Cold Rolling on the Surface Ridging Resistance of Ferritic Stainless Steel	19
Effect of YSZ Particle Size and Content on Microstructure, Mechanical and Tribological Properties of (CoCrFeNiAl)1−x(YSZ)x High Entropy Alloy Composites	19
Oxide Scale Characterization and Study of Oxidation Kinetics in T91 Steel Exposed to Dry Air at High Temperatures (873–1073 K)	19
Investigation of Corner Cracks in Continuous Casting Billet Using Thermomechanical Model and Plant Measurements	19
Dynamic Globularization and Dynamic Phase Transformation Behaviors in a Lamellar Metastable-β Ti Alloy Under Subtransus Processing	19
Effect of Gap Bridging Distance on the Weldability of Aluminum Alloy to Galvanized Steel Joints in AC Pulse GMAW	19
Tensile Properties and Deformation Mechanisms of Ni–Co–W Based Superalloy with High γ′ Content	18
Strengthening Mechanism of Nickel Coating in SLM Processed Ni@Al2O3–CoCrMo Composites	18
Bimetallic Structure of Ti6Al4V/IN718 with CuSi Interlayer for Wire-Arc Directed Energy Deposition Process	18
Creep Property and Correlation of Diffusion-Welded Alloy 800H Tubes for Printed Circuit Heat Exchangers and Steam Generators	18
Single Phase Medium Entropy U-Based Alloys: Thermodynamics, Synthesis, and Mechanical Behavior	18
Effects of Selective Laser Melting Process Parameters on Structural, Mechanical, Tribological and Corrosion Properties of CoCrFeMnNi High Entropy Alloy	18
Mechanical and Microstructural Characterization of the Bond Interface Formed in Diffusion Welding of CoCrNi Medium Entropy Alloy (MEA) and AISI 304 Stainless Steel Under Various Processing Parameters	18
Investigations on the Thermal Expansion Properties of High-Relative-Density Invar 36 Alloy Fabricated by Laser Powder Bed Fusion	18
Impact of Laser Shock Peening on Mechanical Properties of Wire Arc Additive Manufactured Grade 91 Steel and Monel-400 Bimetallic Components	17
Role of Alloying Composition on Mechanical Properties of CuZr Metallic Glasses During the Nanoindentation Process	17
Effect of Annealing Treatment on the Heterogeneous Microstructure and Properties of Cold-Rolled FeCoCrNiMn High-Entropy Alloy	17
Study of Cryogenic Treatment on the Microstructure and Mechanical Properties of Marine 10Ni5CrMoV Steel	17
Effect of Volume Fraction of Ti on Microstructure Evolution and Thermal Properties of Al/Ti Laminated Composites	17
Study of Recrystallisation Mechanism During Hot Deformation of 18CrNiMo7-6 Steel	16
Effects of Initial Microstructure on Mechanical Properties of AA1050/AA2024 Laminated Metal Composite Fabricated by Accumulative Roll Bonding Process	16
Effect of a New Preheating Treatment Method on Microstructure and Texture Evolution of VW134A Alloy during Hot Compression Deformation	16
Kinetics of Silicon Carbide Dissolution in Molten Fe–C Alloys	16
Metallurgical Characterization and Mechanical Properties of Solid–Liquid Compound Casting of Aluminum Alloy: Steel Bimetallic Materials	16
Effects of Electromagnetic Fields on Interfacial Bonding Strength of Ti/Al Clad Sheet Processed by Horizontal Twin-Roll Casting	16
Effects of Different Temperature Paths During Reciprocating Upsetting-Extrusion on Dynamic Recrystallization Refinement of VW93A Alloy	16
Effect of Cooling Rate on Magnetic Properties of Fe-3.3 wt% Si Non-oriented Electrical Steel	16
Study on the Temperature Field and Flow Behavior of Magnesium-Based Biocomposites Prepared by Friction Stir Processing with High Rotating Speed: Experiment and Numerical Simulation	16
Wear Friction and Corrosion Performance Assessment on IF, HSLA and DP600 Steels Subjected to Severe Vibratory Peening	16
Microstructure and Mechanical Characteristics of µ-Plasma Additively Manufactured Equiatomic Ti–Nb–Zr–Mo–Ta HEA	15
Characterization of Formed TRIP1180 Steel Sheet Surface After Stamping with PVD-Coated Tools	15
Numerical Modeling of Concentration Behaviors of Carbon, Oxygen, and Aluminum During Ruhrstahl–Heraeus Process	15

Superhydrophobic Ca/Ce Coating on Anodized Magnesium Alloy by Electrodeposition and Its Corrosion Inhibition	15
Multi-Principal Element Alloy Coatings: A Review of Deposition Techniques, Applications, and Future Prospects	15
Effect of Ultrasonic Melt Treatment on Solidification Microstructure of Al–5Ti–1B Alloy Containing Numerous Inoculant Particles	15
Computational Modelling and Experimental Analysis of Hardness and Microstructure of Reinforcing Bars Produced by Tempcore Process	15
Selective Laser Melting Process for Sensor Embedding into SUS316L with Heat Dissipative Inner Cavity Design	15
Strategic Method to Enhancing the Formability of Nitinol Foils via Micro-incremental Sheet Forming Processes and Evaluation of Structure–Property	15
Microstructure and Crystallographic Texture Evolution of β-Solidifying γ-TiAl Alloy During Single- and Multi-track Exposure via Laser Powder Bed Fusion	15
Microstructure Evolution and Dynamic Precipitation in Age-Hardened AA 6082 Under Cryogenic Helical Channel Angular Pressing	15
Influence of Deposition Orientation on the Microstructure and Mechanical Properties of H12 Tool Steel/316L Stainless Steel Functionally Graded Materials Fabricated by Wire Directed Energy Deposition	15
Microstructure Evolution and Mechanical Properties of Lean Duplex Stainless Steel Bars Prepared by a Short Process	15
Effect of Ni2Si Precipitates on Microstructure and Mechanical Properties of Cu–Zn Brasses	15
Thermal Stability of Precipitates in Al-2.8 wt%Cu-1.4 wt%Li Alloy	15
Surface Characteristics of Ti–6Al–4V Alloy Based on the Process Parameter and Abrasive Process in the Laser Powder Bed Fusion	15
Ultra-High Hardness TiC-W-Ni Cermets Prepared by Spark Plasma Sintering of Ultra-Fine TiC Powder	14
Effect of Cr Addition on Properties and Tribological Behavior at Elevated Temperature of Boride Layers Grown on Borosintered Powder Metallurgy Alloys	14
Machine Learning Based Sintered Density Prediction of Bronze Processed by Powder Metallurgy Route	14
Effect of Rare Earth La on Microstructure, Hardness and Corrosion Resistance of A356 Aluminum Alloy	14
High Strength-Thermal Conductivity Mg–Ga–Ca–Ce Sheet by Hot-Extrusion and Rolling	14
Effect of Powder Bed Fusion Process Parameters on Microstructural and Mechanical Properties of FeCrNi MEA: An Atomistic Study	14
Effect of Warm Rolling on the Structure and Tensile Properties of a Metastable Fe-Based Medium Entropy Alloy	14
Comparative Study on Residual Stress of Cubic Boron Nitride Films Deposited Using DC and RF Sputtering Sources	14
Microstructural Evaluation, Mechanical Properties, and Corrosion Behavior of the Al/Cu/Brass Multilayered Composite Produced by the ARB Process	14
Low-Cycle Fatigue Behavior of Reduced Activation Ferritic-Martensitic Steel at Elevated Temperatures	14
Improved Microstructural and Mechanical Properties Inhomogeneity of a Large-Scale AZ91D Magnesium Alloy Billet by Low-Frequency Electromagnetic Casting	14
Dissimilar Joining of Low-Carbon Steel to 6061-T6 Aluminum Alloy by Novel Method of Pinless Friction Stir Spot Welding-Brazing	14
Characterization of Hypereutectoid Ti6Al4V–Cu Alloys Fabricated Using Electron Beam Additive Manufacturing	14
Effects of Spray Parameters on the YSZ-Alumina Splat Formation During Solution Precursor High Velocity Flame Spraying	14
Material Selection Method Using Tangible and Intangible Material Properties: A Case Study of Travel Luggage	14
Laser Surface Texturing in Powder Bed Fusion: Numerical Simulation and Experimental Characterization	13
Correction: Strengthening Effect of Fe60Mn16Ni12Cr12 Medium-Entropy Alloys via Co-Doping Al / C	13
Influence of Shielding Gas on the Microstructure and Mechanical Properties of Duplex Stainless Steel in Wire Arc Additive Manufacturing	13
Using Solution Heat Treatment and Multi Directional Forging to Improve the Mechanical and Corrosion Properties of an Mg–2Zn–0.2Ag Alloy	13
Laser Peening: A Review of the Factors, Effects, Applications, Comparison with Shot Peening and State-of-the-Art	13
Effect of Space Holder Size on Microstructure and Mechanical Properties of Aluminum Foam	13
Initial Report on the Oriented-precipitation of T1-Phase in Creep-Aged Al-Cu-Li Single Crystal	13
Phenomenological Model for the Dynamic Superplastic Deformation Mechanism in a Zn-Al Eutectoid Alloy Modified with 2 wt% Cu	13
Heat Treatment Process Study and ANN-GA Based Multi-Response Optimization of C45 Steel Mechanical Properties	13
Effects of Cr and Ti Addition on Mechanical Properties and Thermal Conductivity of Al–7Si–3Mg Die-Casting Alloys	13
Designing Ternary Laves Phase-Based Eutectic Alloys CrFeNbx with Excellent Strength, Toughness, and Thermal Stability	13
Enhanced Strength and Ductility of Biodegradable Zn-1Mg Alloy Through EECAP Processing at Different Temperatures	13
Laser Polishing of Nickel-Titanium Shape Memory Alloy Produced via Laser Powder Bed Fusion	13
High Temperature Oxidation Resistance of NiCoCrAl High Entropy Alloy Coating on the TiAl Alloy	13
Effects of Sc Additions on Annealing Behavior of Heavily Cold-Rolled Al-Cu-Mn Alloys	13
Influence of Sn Addition on the Ignition Resistance and Microstructural Evolution of Non-Flammable Mg-9Al-0.8Zn-0.1Mn-0.3Ca-0.2Y Alloy	12
Study of Cu Effect and In-situ Yttria Dispersoids on Microstructure Evolution of Mechanically Alloyed CoFeNiCrCu High Entropy Alloys	12
Effect of Process Parameters on Hot Cracking During Laser Fillet Welding of AA6061-T6	12
Ultrasonic Treatment of Ti-5Al-0.5 V Alloy Subjected to Equal-Channel Angular Pressing	12
Effect of Grain Size on the Local Deformation Behavior Associated with the Discontinuous Yielding in a High Mn Austenitic Steel	12
On the Characteristic Evaluation of Bimetallic Interface of Carbon Steel (EN31) and Aluminium (AA4043) for Wire Arc Additive Manufacturing	12
Material Flow Behavior and Mechanical Properties of Dissimilar Friction Stir Welded Al 7075 and Mg AZ31 Alloys Using Cd Interlayer	12
Microscopic Study on the Blister Formation Mechanism in Electrogalvanized Steel	12
Simple Shear Extrusion of Al/Al2O3 Composite Prepared by Stir Casting and Hot Forging	12
Excellent Strengthening of Low-Carbon Steel by Severe Free-End Torsion	12
Influences of Rare-Earth Y Addition on the Microstructures, Mechanical Properties and Stacking Faults of ZK60 Alloys by Powder Metallurgy	12
Microstructure-controlled Electrodeposition of Mechanically Reliable Double-layered Thin Foils for Secondary Batteries	12
Improving High-Temperature Wear Resistance of Ti–6Al–4V alloy via Si–B–Y Co-Deposited Coatings	12
Novel Strategy for Reducing Residual Stress in Titanium Alloy Parts Obtained via Additive Manufacturing	11
Effects of Dwell Time on Thermo-Mechanical Fatigue Behavior in a Single-Crystal Ni-Based Superalloy	11
Role of Synthetic Slag Treatment on the Morphology of Non-Metallic Inclusions and Subsequent Cold Drawability of the High Carbon Wire Rod Steel	11
Selection of Process Parameters and its Effect on Bead Geometry, Mechanical Properties, and Microstructure of Inconel 825 Fabricated Using Wire Arc Additive Manufacturing	11
Recent Advancements in Additive Manufacturing (AM) Techniques: A Forward-Looking Review	11
A Method for Measuring Plastic Strain Ratio Over a Wide Strain Range Using the Digital Image Correlation Technology	11
Rapid Synthesis of W–Cr Solid–Solution by Dielectric-Barrier Discharge-Plasma-Assisted Ball Milling	11
Microstructural Evolution and Dynamic Recrystallization Behavior of the Homogenized 2195 Al–Li Alloy During Hot Deformation	11
Development and Characterization of a Novel Fine-Grained W–Ni–Mn–Mo Alloys with La2O3 Addition Prepared Via Low-Temperature Sintering	11
A Comprehensive Review on Hot Deformation Behavior of High-Entropy Alloys for High Temperature Applications	11
Strengthening Mechanisms and Deformation Behavior of Industrially-Cast and Lab-Cast Dual-Phase High Entropy Alloy	11
Investigation of the Microstructure and Mechanical Characteristics of Lattice Structures Produced by Laser Powder Bed Fusion Method	11
Microstructure, Mechanical Properties and Strengthening Mechanism of Mg-8Gd-2 Nd-xEr-0.5Zr Alloy	11
Tensile Properties of Additively Manufactured C-18150 Copper Alloys	11
First-Principles Study on H Traps at the Interface Between Carbides and α-Fe with Alloy Elements	11
Nanotwinned Microstructure Engineering of Electroplated Copper for Enhanced Anti-corrosion in Alkaline Medium	11
Effect of Pouring Temperature on Microstructure Characteristics and Properties of Semi-Solid Near-Eutectic Al–Si Alloy	11
Novel SPD Method: Twisted Variable Channel Angular Extrusion	11
Effect of Co Content on the Microstructure and Corrosion Behavior of Al0.3CoxCrFeNi High Entropy Alloys	11
Effect of Carbon Fibre Reinforcement on an Aluminium Metal Matrix Composite Joint Through Upward Friction Stir Processing	11
Dependency of Portevin-LeChatelier Effect and Microstructure Characteristics of 9Cr ODS Steels on Strain Rates Upon Hot Deformation	11
Substitution of Ni with Cu and Its Impact on the Corrosion Resistance of Ni-Advanced Weathering Steels in the Simulated Tropical Marine Atmosphere	11
Effects of Interactions Among Alloying Elements on the Microstructure, Phase Transitions, and Electrical Resistivity of the Cu81Al19 Alloy	11
Relationship between Microstructure and Wear Behaviour in A356 Alloy and A356/Al2O3 and A356/WC Composites After Casting and Hot-Extrusion	11

Machine Learning Complex Interactions Among Recovery, Precipitation, and Recrystallization for Nb Micro-Alloyed Steels	11
Investigation of Cracking Susceptibility and Porosity Formation and Its Mitigation Techniques in Laser Powder Bed Fusion of Al 7075 Alloy	10
Melting Properties and Phase Composition Transformation of Ti-Bearing Electric Furnace Slags in CaO–SiO2–MgO–Al2O3–50%TiO2 System	10
Investigation on the Potential of Laser and Electron Beam Additively Manufactured Ti–6Al–4V Components for Orthopedic Applications	10
Development of Particle and Grain Uniformity in High-Ductility Al–Zn–Mg Alloys with the Addition of Mg and Cu	10
Dynamic Recrystallization Behaviors and the Texture Evolution in Mg–9Al–1Zn Alloy Produced by ECAP at Different Temperatures	10
Integrating Machine Learning and Thermodynamic Descriptors for Enhanced Ni-Based Single Crystal Superalloys Creep Life Prediction and Alloy Design	10
Investigation of Temperature Dependency of Tensile and Fatigue Behavior of Manganese-Molybdenum-Nickel ASTM A302 Grade C Alloy	10
Synergistic Effect of Energy Absorption and Adiabatic Temperature on the Microstructural Evolution and Mechanical Properties During High-Speed Impacts	10
Development of Self-lubricating Nickel Based Composite Clad using Microwave Heating in Improving Resistance to Wear at Elevated Temperatures	10
Effect of Electrochemical Hydrogen Charging Time on Hydrogen Embrittlement of the Hot-Rolled and Accelerated Cooling Treated API X70 Steel	10
Mechanical Response, Twinning Behaviours and Strain Incompatibility of FSWed-AZ31B Joints Along Different Loading Paths	10
Influence of Machine Stiffness on the Portevin–Le Chatelier Effect of Ti-12Mo Alloy Based on a Modified McCormick Constitutive Model	10
Improving the Strength and Ductility Balance of Al–Ca–(Fe, La, Ce) Ternary Eutectic Alloys by High-Pressure Torsion Processing and Subsequent Annealing	10
Investigation of Elastic Modulus Degradation and Recovery with Time and Baking Process for Deformed Automotive Steel Sheets	10
Shear Deformation Behavior of Heterostructured Materials: Experimental and Numerical Analyses	10
Influence of Heat Treatment on Stainless Steel 316L Alloy Manufactured by Hybrid Additive Manufacturing Using Powder Bed Fusion and Directed Energy Deposition	10
Effect of Heat Treatment on the Properties of a High Alloying Maraging Steel Fabricated by Laser Metal Deposition	10
Effect of Cyclic Deep Cryogenic Treatment on Corrosion Resistance of 7075 Alloy	10
Microstructure Evolution and Strengthening Mechanism of Regenerated Brass Alloy under Fe-Mn Control during Cold Drawing	10
Biomimetic Design and Performance of TPMS Radial Continuous Gradient Porous Bone Scaffolds	10
Heat-Affected Zone Characteristics with Post-Weld Heat Treatments in Austenitic Fe–Mn–Al–C Lightweight Steels	10
Evident α/γ Interface Sliding in Fully Lamellar TiAl Alloy During Hot Deformation: Metallurgical Observation and Mesoscopic Modelling	10
Prediction of Creep Life Using an Explainable Artificial Intelligence Technique and Alloy Design Based on the Genetic Algorithm in Creep-Strength-Enhanced Ferritic 9% Cr Steel	9
Influence of Gd Content on the Microstructure and Dynamic Impact Mechanical Behavior of Extruded Mg-Gd-Y-Zr Alloys	9
Measurements of Enthalpies of Mixing of Sn–Ga–In Ternary Alloy System by Calorimetric Technique	9
Study on Microstructure and Mechanical Properties of CrCuFeNiV Multi Principal Element Alloy	9
Non-reciprocal Heterogeneous Nucleation in Solidification of Ag–Cu Alloys	9
Silicon in Die Steels	9
Application of Artificial Neural Network to Predict the Crystallite Size and Lattice Strain of CoCrFeMnNi High Entropy Alloy Prepared by Powder Metallurgy	9
Effect of Post-Weld Heat Treatment Conditions on Mechanical Properties, Microstructures and Nonductile Fracture Behavior of SA508 Gr.1a Thick Weldments	9
Behavior and Mechanism of Void Welding Under Thermal Mechanical Coupling	9
Role of Stress-Induced Martensite Transformation on Deformation Behavior and Microstructural Evolution in Metastable β Titanium Alloys during Compressive Deformation	9
Elemental Additions on Corrosion Resistance of High Entropy Alloy Coatings on Stainless Steel Fabricated via Laser-Based Methods: A Review	9
Influence of the Parameters of Combined Processing and Drawing on the Structure and Properties of Conductor Semi-finished Products From Aluminum Alloys with Additives of Rare Earth and Transition Meta	9
Computational Model for Predicting Precipitation Evolution in Two-Phase Steel: First Application to Grain-Oriented Electrical Steel	9
Atomic Scale Diffusion Study in Quaternary and Quinary Alloys of Co–Cr–Fe–Mn–Ni System	9
Distinct Microstructure and Hardness of Zr-2.5Nb Alloy Annealed in Lower and Upper Dual-Phase Regions: the Role Played by Nb	9
Solidification and Evolution of β-NiAl Phase in a Re-Containing Single Crystal Superalloy	9
Influence of Welding Processes on the Microstructure and Mechanical Properties of Duplex Stainless Steel Parts Fabricated by Wire Arc Additive Manufacturing	9
Effects of the Environment and Temperature on the Tribological Behavior of TiZrHfNbTa Refractory High-Entropy Alloy	9
Study on the Tensile and Shear Behaviors of Selective Laser Melting Manufactured Ti6Al4V	9
Hot-Cracking Mitigation and Microcrack Formation Mechanisms in Laser Powder Bed Fusion Processed Hastelloy X and Cantor High Entropy Alloys	9
Evolution of Phases and their Influence on Shape Memory Effect by Varying Sintering Parameters of NiTi Alloys	9
Effects of Aging Temperature on the Mechanical Properties and Precipitation Behavior of a Pre-strained Al–Cu–Mg–Ag Alloy	9
Microstructure and Mechanical Properties of SiC + Fe + Mn + Sn Hybrid Reinforced Surface Composites Fabricated by Friction Stir Processing: Effect of Double Pass	9
Effect of Extrusion Temperature on the Microsturcture in a Bismuth Modified Magnesium Alloy	9
Effect of Laser Power on Anisotropic Microstructure and Mechanical Behavior of Biomedical Ti-35Nb-15Zr (at%) Alloy Fabricated by Laser Powder Bed Fusion	9
Microstructure Refinement in Solidification of a Deeply Undercooled Ternary Nickel Based Alloy	9
Influence of Microalloying and Isothermal Treatment on Microstructure and Mechanical Properties of High Carbon Steel	9
On the Hybrid Modeling of Phenomenological Damage Evolution in Low Carbon Steels During Equal Channel Angular Extrusion Process	8
Study on the Microstructure and Corresponding Stress Corrosion Cracking Behavior of Joints of Copper Tubes	8
Effects of Specimen Orientation and Heat Treatment on Microstructure and Crack Propagation Path of the IN718 Alloy Built by the Additive Manufacturing Process	8
Effect of Aging Precipitate on Ductility Anisotropy and Low Cycle Fatigue Behavior of AA2195 Al-Li Alloy	8
Effect of Al Addition on Thermal Stability and Thermoplastic Forming Ability of Ti35Zr15Ni40Cu10 Metallic Glass in the Supercooled Liquid Region	8
Effects of Ti Content on the Microstructure and Mechanical Properties of Al0.2CoCrFeNi2Tix High-Entropy Alloys	8
Microstructure and Mechanical Properties Characteristics of 2319 Aluminum Alloy Fabricated Using Cold Metal Transfer Pulsed Advanced (CMT-PADV) Wire Arc Additive Manufacturing	8
Effect of Solution Treatment on Microstructure, Texture, and Anisotropy of Mechanical Properties in TA10 (Ti-0.3Mo-0.8Ni) Sheet	8
Study on the Influence of Nickel Additions on AA7020 Formability Under Superplastic Forming Like Conditions	8
Bauschinger Effect or Kinematic Hardening: Bridging Microstructure and Continuum Mechanics	8
Time-Dependant Microstructural Evolution and Tribological Behaviour of a 26 wt% Cr White Cast Iron Subjected to a Destabilization Heat Treatment	8
Mechanical Properties and Energy Absorption of Soft–Hard Dual Phase Lattice Structures Manufactured via Selective Laser Melting	8
High Temperature Deformation Behavior and Processing Maps of FeCoNiCrAlTi Dual Phase High Entropy Alloy	8
Correction to: Importance of Individual Evaluation of Crystallographic Texture and Microstructure Effects on Biocompatibility and Corrosion Performance of Ti6Al4V Alloy	8
Effect of α-Al and Si Precipitates on Microstructural Evaluation and Corrosion Behavior of Laser Powder Bed Fusion Printed AlSi10Mg Plates in Seawater Environment	8
Effect of Preheating Temperature on Microstructural and Mechanical Properties of Inconel 718 Fabricated by Selective Laser Melting	8
Impact of Heating Rate on the Tribological and Corrosion Properties of AISI 52100 Bearing Steel Consolidated via Spark Plasma Sintering	8
Effects of Extrusion Temperature on the Properties of a 0.5 wt% GNP/Al Composite in Porthole Die Extrusion	8
Influence of Patterns on Mechanical Properties of Ultrasonically Welded Joints in Copper Substrate and Wire	8
Characterization of Distribution of Microstructure and Micro-mechanical Properties of Nickel-Based Single Crystal Superalloy Within the Shot-Peened Layer	8
Microstructure, Texture, and Mechanical Properties of Thin Titanium Plates Jointed by Coaxial Laser-Plasma Hybrid Welding	8
Prediction of Optimum Welding Parameters for Weld-Quality Characterization in Dissimilar Ultrasonic-Welded Al-to-Cu Tabs for Li-ion Batteries	8
Anti-Corrosion Coatings for Protecting Nb-Based Alloys Exposed to Oxidation Environments: A Review	8
Improving In-Vitro Corrosion and Degradation Performance of Mg–Zn–Ca Alloy for Biomedical Applications by Equal Channel Angular Pressing	8
Modeling the Stress–Strain Curves and Dynamic Recrystallization of Nickel-Based A230 Alloy During Hot Deformation	8
Impact of Calcium Addition on Microstructural and Mechanical Properties of Al-3% Mg-0.8% Mn Alloy Under Different Treatment Paths	8
Development of CoCrWNi Alloy Through Stacking Fault Energy Modeling by First-Principles, Computational Thermodynamic, and Experimental Methods	8
Distribution of Boron in 9.5Cr–1.5MoCoVNbNB Martensitic Heat-Resistant Steel Studied by Secondary Ion Mass Spectroscopy and atom Probe Tomography	8
Effects of Ultrasonic Nanocrystal Surface Modification on Surface Hardening Mechanism and Wear Behavior of Additively Manufactured High-Manganese Steel	8
Microstructure Evolution and Mechanical Properties of AA2099 Al–Li Alloy with Tailored Li‐Containing Precipitates in Uniaxial Compression at Medium Temperature	8
Influence of Al2O3 Content and Cooling Rate on Crystallization in Fe2O3–CaO–SiO2–Al2O3 Systems	8
Influence of Deposition Sequence and Thermal Cycles on the Microstructure and Wear Behavior of WAAM-Fabricated SS309L and Inconel 625 Bimetallic Structures	8
Microstructural Strengthening and Plastic Degradation of Ti–6Al–4V Induced by Laser Ablation	8
Oxidation Behavior of the AlCoCrFeNiCu0.5 High-Entropy Alloy at 800 °C and 900 °C	8
Effect of Zn-Coating Process on Liquid Metal Embrittlement of TRIP Steel	8
Effect of Welding Conditions on Weld Zone Temperature and Mechanical Properties of Friction Stir Welded AZ61 Magnesium Alloy Sheet	8
Microstructure and Tribological Behaviour of Inconel-625 Superalloy Produced by Selective Laser Melting	8
Rapid Consolidation of WC-ZrSiO4 Hard Materials by Spark Plasma Sintering: Microstructure, Densification, and Mechanical Properties	8
Effect of Volatiles from Spent Coffee Grounds Biomass to Reduce Ni(OH)2 at Moderate Temperature	8
Determination of Dynamic Characteristics of Aluminum 1050 Sheet Using Electromagnetic Forming Ring Expansion Test	8
Comparison of Creep Fracture Behavior Between Selective Laser Melted and Forged Alloy 230 After Testing at 1200 °C	7
Correction: Effect of Silicide and α2 Phase on the Creep Behavior of TC25G Alloy at High Temperature	7
Favorable Impact Toughness of High Heat Input Coarse-Grained HAZ in an Ultra-Low Carbon High-Strength Microalloyed Steel	7
Effect of Plastic Anisotropy on the Kinetics of Static Softening in AA2024–T3 Aluminum Alloy	7
Influence of Process Parameters on Microstructure and High-Low Temperature Mechanical Properties of 2195/2219 Dissimilar Alloy Welded Joints	7