Reviews on Advanced Materials Science

Article	Citations
Effect of basalt fiber length on the behavior of natural hydraulic lime-based mortars	68
All-dielectric tunable zero-refractive index metamaterials based on phase change materials	44
From magnesium oxide, magnesium oxide concrete to magnesium oxide concrete dams	35
Research progress on Fe3+-activated near-infrared phosphor	33
Utilization of steel slag in concrete: A review on durability and microstructure analysis	30
Influence of palm oil ash and palm oil clinker on the properties of lightweight concrete	28
Tailoring ZX30 alloy’s microstructural evolution, electrochemical and mechanical behavior via ECAP processing parameters	25
Alkali-activated binder based on red mud with class F fly ash and ground granulated blast-furnace slag under ambient temperature	25
Tailoring the mechanical and degradation properties of 3DP PLA/PCL scaffolds for biomedical applications	23
A simulation modeling methodology considering random multiple shots for shot peening process	22
Experimental study on recycled steel fiber-reinforced concrete under repeated impact	22
Evaluation of the properties and applications of FRP bars and anchors: A review	20
Recent trends in rubberized and non-rubberized ultra-high performance geopolymer concrete for sustainable construction: A review	20
Use of explainable symbolic regression approaches for predicting nanomaterial-enhanced concrete performance	18
Research evolution on self-healing asphalt: A scientometric review for knowledge mapping	18
Applicability of fractal models for characterising pore structure of hybrid basalt–polypropylene fibre-reinforced concrete	18
Autogenous shrinkage of cementitious composites incorporating red mud	18
Optimization of eggshell particles to produce eco-friendly green fillers with bamboo reinforcement in organic friction materials	18
Influence of welding speed on the microstructure and mechanical properties of CMT+P WAAM-based 205C aluminum alloy	17
A review on partial substitution of nanosilica in concrete	17
Marine polymers in tissue bioprinting: Current achievements and challenges	17
Modification of the structure and properties of oxide layers on aluminium alloys: A review	17
Properties and potential applications of polymer composites containing secondary fillers	16
Effects of cold deformation modes on microstructure uniformity and mechanical properties of large 2219 Al–Cu alloy rings	16
Transforming waste into value: Advancing sustainable construction materials with treated plastic waste and foundry sand in lightweight foamed concrete for a greener future	16

Optimizing compressive strength prediction in glass powder-modified concrete: A comprehensive study on silicon dioxide and calcium oxide influence across varied sample dimensions and strength ranges	16
Production of novel reinforcing rods of waste polyester, polypropylene, and cotton as alternatives to reinforcement steel rods	16
Synthesis and characterization of a novel ternary magnetic composite for the enhanced adsorption capacity to remove organic dyes	15
Establishing strength prediction models for low-carbon rubberized cementitious mortar using advanced AI tools	14
Producing sustainable binding materials using marble waste blended with fly ash and rice husk ash for building materials	14
Strontium coupling with sulphur in mouse bone apatites	14
Prediction of flexural strength of concrete with eggshell and glass powders: Advanced cutting-edge approach for sustainable materials	13
Study on physical and mechanical properties of complex-phase conductive fiber cementitious materials	13
An overview of the research trends on fiber-reinforced shotcrete for construction applications	13
Biosynthesis of Ag/bentonite, ZnO/bentonite, and Ag/ZnO/bentonite nanocomposites by aqueous leaf extract of Hagenia abyssinica for antibacterial activities	13
Study on the uniaxial compression constitutive relationship of modified yellow mud from minority dwelling in western Sichuan, China	13
Effect of molybdenum tailings aggregate on mechanical properties of engineered cementitious composites and stirrup-confined ECC stub columns	13
Wear properties of graphene-reinforced aluminium metal matrix composite: A review	13
Finite element analysis of deterioration of axial compression behavior of corroded steel-reinforced concrete middle-length columns	12
Comparison and review of classical and machine learning-based constitutive models for polymers used in aeronautical thermoplastic composites	12
Evaluating the strength loss and the effectiveness of glass and eggshell powder for cement mortar under acidic conditions	12
Study on aging mechanism of SBS/SBR compound-modified asphalt based on molecular dynamics	11
Leveraging waste-based additives and machine learning for sustainable mortar development in construction	11
Experimental study on the seismic performance of short shear walls comprising cold-formed steel and high-strength reinforced concrete with concealed bracing	11
A step towards sustainable concrete with the utilization of M-sand in concrete production: A review	11
Emerging boron nitride nanosheets: A review on synthesis, corrosion resistance coatings, and their impacts on the environment and health	11
Flexural performance evaluation using computational tools for plastic-derived mortar modified with blends of industrial waste powders	11
Interfacing the IoT in composite manufacturing: An overview	11
Preparation and photocatalytic degradation of Sulfamethoxazole by g-C3N4 nano composite samples	11
Low-carbon embodied alkali-activated materials for sustainable construction: A comparative study of single and ensemble learners	10
Post-heating strength prediction in concrete with Wadi Gyada Alkharj fine aggregate using thermal conductivity and ultrasonic pulse velocity	10
CSG compressive strength prediction based on LSTM and interpretable machine learning	10
Integrating micro- and nanowaste glass with waste foundry sand in ultra-high-performance concrete to enhance material performance and sustainability	10
Axial compression behavior and stress–strain relationship of slurry-wrapping treatment recycled aggregate concrete-filled steel tube short columns	10
Performance analysis of WEDM during the machining of Inconel 690 miniature gear using RSM and ANN modeling approaches	10
Exploring the potential applications of semi-flexible pavement: A comprehensive review	10
Nanotechnology for calcium aluminate cement: thematic analysis	10
Investigating the rheological characteristics of alkali-activated concrete using contemporary artificial intelligence approaches	10
Effect of fiber treatment on physical and mechanical properties of natural fiber-reinforced composites: A review	10
Evaluation of a novel steel box-soft body combination for bridge protection against ship collision	10
Promoting the sustainable construction: A scientometric review on the utilization of waste glass in concrete	10
Green synthesis, characterizations, and antibacterial activity of silver nanoparticles from Themeda quadrivalvis, in conjugation with macrolide antibiotics against respiratory pathogens	10
A critical review on mechanical, durability, and microstructural properties of industrial by-product-based geopolymer composites	10
Optimization and characterization of composite modified asphalt with pyrolytic carbon black and chicken feather fiber	10
Effect of alkaline treatment time of fibers and microcrystalline cellulose addition on mechanical properties of unsaturated polyester composites reinforced by cantala fibers	9
Recent developments in ultrasonic welding of similar and dissimilar joints of carbon fiber reinforcement thermoplastics with and without interlayer: A state-of-the-art review	9
Development of lightweight roof tiles using spent mushroom material: enhancing thermal insulation and sustainability	9
An effective approach to improve microstructure and tribological properties of cold sprayed Al alloys	9
Enhancement of hardness and wear strength of pure Cu and Cu–TiO2 composites via a friction stir process while maintaining electrical resistivity	9
Analyzing the efficacy of waste marble and glass powder for the compressive strength of self-compacting concrete using machine learning strategies	9
Mechanical properties and fatigue analysis of rubber concrete under uniaxial compression modified by a combination of mineral admixture	9
Evaluation of color matching of three single-shade composites employing simulated 3D printed cavities with different thicknesses using CIELAB and CIEDE2000 color difference formulae	9
Exploring the viability of AI-aided genetic algorithms in estimating the crack repair rate of self-healing concrete	9
Influence of sodium silicate to precursor ratio on mechanical properties and durability of the metakaolin/fly ash alkali-activated sustainable mortar using manufactured sand	8
Experimental study of flexural performance of solid wood beams strengthened with CFRP fibers	8

Analyzing the compressive performance of lightweight foamcrete and parameter interdependencies using machine intelligence strategies	8
Compressive strength of waste-derived cementitious composites using machine learning	8
Investigation of the corrosion performance of HVOF-sprayed WC-CoCr coatings applied on offshore hydraulic equipment	8
Research on complex multimodal vibration characteristics of offshore platform	8
Investigation of temperature effect on thermo-mechanical property of carbon fiber/PEEK composites	8
Synthesizing sustainable construction paradigms: A comprehensive review and bibliometric analysis of granite waste powder utilization and moisture correction in concrete	8
Powder metallurgy processing of high entropy alloys: Bibliometric analysis and systematic review	8
Characterization of sandwich materials – Nomex-Aramid carbon fiber performances under mechanical loadings: Nonlinear FE and convergence studies	8
Advanced hybrid machine learning models for estimating chloride penetration resistance of concrete structures for durability assessment: optimization and hyperparameter tuning	8
Interaction of micro-fluid structure in a pressure-driven duct flow with a nearby placed current-carrying wire: A numerical investigation	8
A review on rutting in asphalt concrete in Saudi Arabia: mitigation strategies, innovations, and future directions	8
Novel approaches in prediction of tensile strain capacity of engineered cementitious composites using interpretable approaches	7
Multiscale characterization of the UV aging resistance and mechanism of light stabilizer-modified asphalt	7
Recent advances in 4D printing of hydrogels	7
Investigation of the mechanical properties, surface quality, and energy efficiency of a fused filament fabrication for PA6	7
Tailoring rheology and mechanical properties of 3D printed mortars with nanoclays and superplasticizer	7
Hybrid magnesium matrix composites: A review of reinforcement philosophies, mechanical and tribological characteristics	7
Effect of selective laser sintering processing parameters on the mechanical properties of peanut shell powder/polyether sulfone composite	7
Development of a new damping ratio prediction model for recycled aggregate concrete: Incorporating modified admixtures and carbonation effects	7
Friction stir welding of dissimilar Al–Mg alloys for aerospace applications: Prospects and future potential	7
Non-conventional approaches to producing biochars for environmental and energy applications	6
Studies on the anticorrosive effect of phytochemicals on mild steel, carbon steel, and stainless-steel surfaces in acid and alkali medium: A review	6
Fe-containing nominal wollastonite (CaSiO 3 )–Na 2 O glass-ceramic: Characterization and biocompat	6
Ultrasonic longitudinal torsion-assisted biotic bone drilling: An experimental study	6
Multifunctional engineered cementitious composites modified with nanomaterials and their applications: An overview	6
Evolution of the pore structure of pumice aggregate concrete and the effect on compressive strength	6
Analyzing the viability of agro-waste for sustainable concrete: Expression-based formulation and validation of predictive models for strength performance	6
Effect of grain boundary segregation and oxygen vacancy annihilation on aging resistance of cobalt oxide-doped 3Y-TZP ceramics for biomedical applications	6
Integrating testing and modeling methods to examine the feasibility of blended waste materials for the compressive strength of rubberized mortar	6
Incorporating geranium plant waste into ultra-high performance concrete prepared with crumb rubber as fine aggregate in the presence of polypropylene fibers	6
Revolutionizing energy harvesting: A comprehensive review of thermoelectric devices	6
Relevance of pore network connectivity in tannin-derived carbons for rapid detection of BTEX traces in indoor air	6
Study on bending performance of prefabricated glulam-cross laminated timber composite floor	6
Effect of water immersion on shear strength of epoxy adhesive filled with graphene nanoplatelets	6
A numerical analysis of the rotational flow of a hybrid nanofluid past a unidirectional extending surface with velocity and thermal slip conditions	6
UV aging behavior evolution characterization of HALS-modified asphalt based on micro-morphological features	5
A sawtooth constitutive model describing strain hardening and multiple cracking of ECC under uniaxial tension	5
Investigating the sulfonated ZnO–PVA membrane for improved MFC performance	5
Cement-based materials for radiative cooling: Potential, material and structural design, and future prospects	5
Mechanical testing and engineering applicability analysis of SAP concrete used in buffer layer design for tunnels in active fault zones	5
A comprehensive review of preheating temperature effects on reclaimed asphalt pavement in the hot center plant recycling	5
Experimental investigations of electrodeposited Zn–Ni, Zn–Co, and Ni–Cr–Co–based novel coatings on AA7075 substrate to ameliorate the mechanical, abrasion, morphological, and corrosion properties for	5
Mechanically sustainable and primary recycled thermo-responsive ABS–PLA polymer composites for 4D printing applications: Fabrication and studies	5
The evaluation of the mechanical properties of glass, kenaf, and honeycomb fiber-reinforced composite	5
Facile design of PTFE-kaolin-based ternary nanocomposite as a hydrophobic and high corrosion-barrier coating	5
Foam concrete for lightweight construction applications: A comprehensive review of the research development and material characteristics	5
Compressive and tensile strength estimation of sustainable geopolymer concrete using contemporary boosting ensemble techniques	5
Thermogravimetric (TG/DTG) characterization of cold-pressed oil blends and Saccharomyces cerevisiae-based microcapsules obtained with them	5
Efficacy of sustainable cementitious materials on concrete porosity for enhancing the durability of building materials	5
Effects of C and heat treatment on microstructure, mechanical, and tribo-corrosion properties of VAlTiMoSi high-entropy alloy coating	5
Theoretical study of the effect of orientations and fibre volume on the thermal insulation capability of reinforced polymer composites	5
Eco-friendly green synthesis of silver nanoparticles with Syzygium aromaticum extract: characterization and evaluation against Sch	5
Dual-biprism-based single-camera high-speed 3D-digital image correlation for deformation measurement on sandwich structures under low velocity impact	5
Research progress of metal-based additive manufacturing in medical implants	5
Fabrication and performance analysis of sustainable municipal solid waste incineration fly ash alkali-activated acoustic barriers	5
Effect of fiber orientation and elevated temperature on the mechanical properties of unidirectional continuous kenaf reinforced PLA composites	4
Eco-friendly utilisation of agricultural waste: Assessing mixture performance and physical properties of asphalt modified with peanut husk ash using response surface methodology	4
Exploring polyetheretherketone in dental implants and abutments: A focus on biomechanics and finite element methods	4
Effect of rare earth Nd on the microstructural transformation and mechanical properties of 7xxx series aluminum alloys	4
A critical review of alkali-activated metakaolin/blast furnace slag-based cementitious materials: Reaction evolution and mechanism	4
α-hemihydrate gypsum crystal concerning the anionic surfactants with vary chain structure: syntheses, morphology controlling, formation mechanisms	4
Research on key casting process of high-grade CNC machine tool bed nodular cast iron	4
Conductive and self-cleaning composite membranes from corn husk nanofiber embedded with inorganic fillers (TiO2, CaO, and eggshell) by sol–gel and casting processes for smart membrane appli	4
Optimizing the ECAP processing parameters of pure Cu through experimental, finite element, and response surface approaches	4
Exploring the potential of agricultural waste as an additive in ultra-high-performance concrete for sustainable construction: A comprehensive review	4
Color match evaluation using instrumental method for three single-shade resin composites before and after in-office bleaching	4
Bending energy absorption performance of composite fender piles with different winding angles	4
Self-compacting mortar overlays using expanded polystyrene beads for thermal performance and energy efficiency in buildings	4
Sustainable utilization of aluminum waste in geopolymer concrete: Influence of alkaline activation on microstructure and mechanical properties	4
Comparison of the physical properties of different polyimide nanocomposite films containing organoclays varying in alkyl chain lengths	4
Frost resistance and life prediction of recycled brick aggregate concrete with waste polypropylene fiber	4
Hybrid bio-fiber/bio-ceramic composite materials: Mechanical performance, thermal stability, and morphological analysis	4
Effect of curved anchor impellers on power consumption and hydrodynamic parameters of yield stress fluids (Bingham–Papanastasiou model) in stirred tanks	4
Biomedical and therapeutic potential of marine-derived Pseudomonas sp. strain AHG22 exopolysaccharide: A novel bioactive microbial metabolite	4
Predicting fracture energy and durability parameters of concrete through hybrid machine learning models	4
Experimental and numerical study on the axial compression behavior of circular concrete columns confined by BFRP spirals and ties	4
Experimental study on solid particle erosion of protective aircraft coatings at different impact angles	4
Equation-driven strength prediction of GGBS concrete: a symbolic machine learning approach for sustainable development	3
Discrete element simulation study on effects of grain preferred orientation on micro-cracking and macro-mechanical behavior of crystalline rocks	3
Advances in processing and ablation properties of carbon fiber reinforced ultra-high temperature ceramic composites	3

Study on the damage mechanism and evolution model of preloaded sandstone subjected to freezing–thawing action based on the NMR technology	3
Experimental study on mechanical properties of coal gangue base geopolymer recycled aggregate concrete reinforced by steel fiber and nano-Al2O3	3
Effect of the axial compression ratio on the seismic behavior of resilient concrete walls with concealed column stirrups	3
Optimizing the performance of TPCB/SCA composite-modified asphalt using improved response surface methodology	3
A review of magnetically driven swimming microrobots: Material selection, structure design, control method, and applications	3
Fe nanoparticle-functionalized ordered mesoporous carbon with tailored mesostructures and their applications in magnetic removal of Ag(i)	3
Mechanical damage mechanism investigation on CFRP strengthened recycled red brick concrete	3
Improvement and predictive modeling of the mechanical performance of waste fire clay blended concrete	3
Fabrication of lightweight and thermal insulation roof tiles using industrial wastewater sludge	3
Effect of A-site calcium substitution on the energy storage and dielectric properties of ferroelectric barium titanate system	3
Thermal and mechanical properties of bricks with integrated phase change and thermal insulation materials	3
Effect of TiB 2 particles on the compressive, hardness, and water absorption responses of Kulkual fiber-reinforced epoxy composites	3
Gold nanoparticle-based strategies against SARS-CoV-2: A review	3
A review of microscopic characterization and related properties of fiber-incorporated cement-based materials	3
Application of waste recycle tire steel fibers as a construction material in concrete	3
Structural, physical, and luminescence properties of sodium–aluminum–zinc borophosphate glass embedded with Nd 3+ ions for optical applications	3
Comparative analysis of aggregate gradation variation in porous asphalt mixtures under different compaction methods 1	2
ZnO nanophotocatalytic solution with antimicrobial potential toward drug-resistant microorganisms and effective decomposition of natural organic matter under UV light	2
Effect of sand–precursor ratio on mechanical properties and durability of geopolymer mortar with manufactured sand	2
Reinforcement mechanisms and current research status of silicon carbide whisker-reinforced composites: A comprehensive review	2
Preparation of PVDF-HFP/CB/Ni nanocomposite films for piezoelectric energy harvesting	2
Phase and microstructural characterization of swat soapstone (Mg3Si4O10(OH)2)	2
Properties of ultra-high performance concrete and conventional concrete with coal bottom ash as aggregate replacement and nanoadditives: A review	2
A magnetohydrodynamic flow of a water-based hybrid nanofluid past a convectively heated rotating disk surface: A passive control of nanoparticles	2
Coverage and reliability improvement of copper metallization layer in through hole at BGA area during load board manufacture	2
A semi-empirical model for predicting carbonation depth of RAC under two-dimensional conditions	2
Nanoemulsions of essential oils stabilized with saponins exhibiting antibacterial and antioxidative properties	2
Design and analysis of timber-concrete-based civil structures and its applications: A brief review	2
Study on the mechanical properties and microstructure of recycled brick aggregate concrete with waste fiber	2
Space-time evolution characteristics of loaded gas-bearing coal fractures based on industrial μCT	2
Smart technologies and textiles and their potential use and application in the care and support of elderly individuals: A systematic review	2
A scientometric review on the utilization of copper slag as a substitute constituent of ordinary Portland cement concrete	2
Investigating the anti-aging properties of asphalt modified with polyphosphoric acid and tire pyrolysis oil	2
Luminescence and temperature-sensing properties of Li+, Na+, or K+, Tm3+, and Yb3+ co-doped Bi2WO6 phosphors	2
Eco-friendly waste plastic-based mortar incorporating industrial waste powders: Interpretable models for flexural strength	2
Innovative eco-friendly bio-composites: A comprehensive review of the fabrication, characterization, and applications	2
Influence of PVA fibers on the durability of cementitious composites under the wet–heat–salt coupling environment	2
Study on dynamic response of cushion layer-reinforced concrete slab under rockfall impact based on smoothed particle hydrodynamics and finite-element method coupling	2
EcoMarble: macro-performance and carbon footprint optimization of concrete using cement-substituted Al-Kharj marble dust	2
Research on assembly stress and deformation of thin-walled composite material power cabin fairings	2
Couple effects of multi-impact damage and CAI capability on NCF composites	2