Particuology

Article	Citations
Editorial Board	226
Facile interfacial synthesis of gold micronails with adjustable length and roughness and their superior SERS properties for the detection of p-aminothiophenol	156
Waste to treasure: Reutilization of fluid catalytic cracking coke block as photothermal conversion material for water evaporation	144
Measuring permeability and flowability of powders at various packing fractions	128
Investigating the inflow into a granular bed using a locally resolved method	126
Fluidization of wet cohesive powder in virtual Couette rheometer	101
Parameter identification in the bismuth homogeneous nucleation model for population balance	88
Investigating rotational characteristics and contact mechanisms of star-like shapes using multiellipse-based DEM	83
A micro-investigation on water bridge effects for unsaturated granular materials with constant water content by discrete element method	63
Impact of pressure on gas-solid hydrodynamics of Geldart B and D particles in a pressurized bubbling fluidized bed: A CFD-DEM study	63
Artificial oxygen carriers, from nanometer- to micrometer-sized particles, made of hemoglobin composites substituting for red blood cells	58
Numerical study and experimental validation of copper powder plasma spheroidization process	57
A refined representation method of the particle size distribution curve based on grading entropy	53
Polarized imaging dynamic light scattering for simultaneous measurement of nanoparticle size and morphology	52
Controlled dispersion and velocity evolution of explosion-driven submillimeter particle groups: An experimental and numerical simulation study	51
Considering solid shear stress in MP-PIC simulation of a CFB riser	49
Development, verification and application of a versatile aerosol calibration system for online aerosol instruments	49
Wall-scaling prevention in cryogenic external cooler of ammonium chloride solution by liquid-solid fluidization	48
Experimental and numerical study of maximum efficiency vortex finder insertion depth of a Stairmand cyclone	47
Significant effects of transport on nanoparticles during new particle formation events in the atmosphere of Beijing	46
Acoustic emission and machine learning algorithms for particle size analysis in gas-solid fluidized bed reactors	45
Si-induced insertion of Li into SiC to form Li-rich SiC twin crystal	45
Synergistic precipitant powered self-assembly of papain for cross-linked enzyme crystals preparation	43
Zr-doped titanium lithium ion sieve and EP-granulated composite: Superb adsorption and recycling performance	42
Preparation of calcium carbonate with microstructure and nanostructure from carbide slag for CO2 sequestration by using recyclable ammonium chloride	41

CFD-DEM simulation of high density particles fluidization behaviors in 3D conical spouted beds	40
Multiphysics of multifunctional nanofluids based on different oxides nanoparticles and glycerol fluid	40
Permeable and robust polymer-silica hybrid armor on cell catalyst for sustainable biomanufacturing	40
Quantify the edge effect of HPGR mills with DEM modelling	39
Growth-controlled synthesis of polymer-coated colloidal-gold nanoparticles using electrospray-based chemical reduction	38
Multidimensional separation due to selective spherical agglomeration—Evidence of shape separation via X-ray microtomography	38
Correlation mechanism of friction behavior and topological properties of the contact network during powder compaction	38
Heat transfer analysis in particle-laden flows using the immersed boundary method	38
Controllable synthesis of uniform small-sized MgCO3 from Mg2+ concentrated seawater brine for the preparation of epoxy resin composite and high purity MgO	38
Exploring the therapeutic potential of microwave-assisted biosynthesized silver nanoparticles using Erica manipuliflora Salisb.: A comprehensive study on anticancer and antibacterial potentials	37
Editorial Board	37
Void fraction for random loose packing of the cylindrical particles considering filling rate, material and shape	37
Study on the force chain characteristics with coal dust layer and the three-body contact stiffness	36
CeO2 nanoparticles-decorated CoP nanocubes for accelerating alkaline electrocatalytic oxygen evolution reaction	35
Implementation and validation of a bonded particle model to predict rheological properties of viscoelastic materials	35
Effect of inlet volute wrap angle on the flow field and performance of double inlet gas cyclones	35
Role of surface roughness in the magnesite flotation and its mechanism	35
Numerical study of gas–solid two-phase flow and erosion in a cavity with a slope	35
Pickering emulsions stabilized by colloidal surfactants: Role of solid particles	34
Voidage correction method for DEM study of 3D pebble flows in a bed of cycloidal base	33
Three-dimensional architectures based on carbon nanotube bridged Ti2C MXene nanosheets for Li–S batteries	33
Alginate-gelatin emulsion droplets for encapsulation of vitamin A by 3D printed microfluidics	33
Effect of operational and geometric parameters on the hydrodynamics of a Wurster coater: A CFD-DEM study	33
Numerical study on the settlement of two parallel spherical particles in upward flow	32
Numerical investigation of separation efficiency of the cyclone with supercritical fluid–solid flow	32
Editorial Board	31
Aerosol composition, sources, and secondary processing during autumn at a regional site in the Beijing–Tianjin–Hebei region	31
Romanesco-like calcium carbonate hybrid nanoflowers via egg white lysosomal enzyme-assisted biomineralization	30
Experimental investigation on the gravity driven discharge of cohesive particles from a silo with two outlets	30
Editorial Board	30
Penetration into a granular bed in the presence of upward gas flows	30
Compositional characteristics and toxicological responses of human lung epithelial cells to inhalable particles (PM10) from ten typical biomass fuel combustions	29
Validation of an improved two-fluid model with particle rotation for gas-solid fluidized bed	29
New horizons for therapeutic applications of nanozymes in oral infection	29
Water-soluble organic matter with various polarities in PM2.5 over Xi'an, China: Abundance, functional groups, and light absorption	29
A generalized memory effect in fluid/flame dynamics due to unsteady events	28
Diffusive smoothing CFD-DEM simulations with particle-scale mass transfer in LBE solid-phase oxygen control systems	28
Glutamate oxidase-integrated biomimetic Fe3O4 hybrids as cascade nanozymes for glutamate detection	27
A new transient nonuniformity index for the feed injection zone of a multiphase fluidized bed reactor	27
Ultrasound-triggered directional release from turmeric capsules	26
An extended unresolved CFD-DEM coupling method for simulation of fluid and non-spherical particles	26
Data driven reduced modeling for fluidized bed with immersed tubes based on PCA and Bi-LSTM neural networks	26
Advances of high-performance LiNi1-x-yCoxMyO2 cathode materials and their precursor particles via co-precipitation process	26
DEM investigation of strength and critical state behaviours of granular materials under true triaxial loadings	26
Synergistic impact mechanism of particle size and morphology in superalloy powders for additive manufacturing	25
Self-cleaning effect and secondary swirling clean gas for suppressing particle deposition on vortex finder of gas cyclones	25
Thermodynamic and kinetic mechanism of phase transformation of levofloxacin hydrochloride	25
Experimental study on eliminating various typical fire smokes by ultrasonic field	24
Editorial Board	24
Formation of biomimetic hierarchical nanostructure in homopolymers and block copolymer ternary blend particles	24

Editorial Board	24
How rotational speed of planetary ball mill and polymer load influence the performance and water vapor sorption in solid dispersions composed of tadalafil and soluplus	24
Effect of particle behavior on the apparent viscosity of semi-solid metal: CFD-DEM simulation and artificial neural networks prediction	23
Comparing two IBM implementations for the simulation of uniform packed beds	23
Positive and negative effects of graphite flake and monolayer graphene oxide templates on protein crystallization	23
Editorial Board	23
Effect of succinic acid on morphology transformation of the anhydrous magnesium carbonate particles prepared by magnesium chloride hexahydrate and urea	22
Magnetic activated carbon for the removal of methyl orange from water via adsorption and Fenton-like degradation	22
Efficient synthesis of forsterite via high-temperature thermochemical reactions from boron mud waste without briquetting	22
Impact of the spindle number on the material transport and mixing during planetary roller melt granulation	22
Construction of [email protected] nanoparticles with multiple hetero-interfaces for enhanced electromagnetic wave absorption	21
Bubbling phenomena during granular drainage from an inclined closed-top quasi-two-dimensional conduit	21
Reconstruction of particle distribution for tomographic particle image velocimetry based on unsupervised learning method	21
Real-time pore structure evolution difference between deep and shallow coal during gas adsorption: A study based on synchrotron radiation small-angle X-ray scattering	21
Mesoscale modeling on the influence of surfactants on seepage law during water injection in coal	21
Green synthesis and eco-biological evaluation of Ag/Fe bimetallic nanoparticles using Vallaris solanacea leaf extract targeting insecticide resistance	21
A critical review of ferritin as a drug nanocarrier: Structure, properties, comparative advantages and challenges	21
A novel heterogeneous binding model for simulating nuclear fuel particle FB-CVD coating process based on CFD-DEM concept	21
Investigation on effect of drag models on flow behavior of power-law fluid–solid two-phase flow in fluidized bed	20
Process intensification for the synthesis and purification of battery-grade Li2CO3 with microfluidics	20
Fabrication of high-purity alumina particles by spray drying and surface modification with SDS for methylene blue removal	20
Hot-melt extrusion promotes dissolution, extends “spring-parachute” process and inhibits crystallization in supersaturating microparticle systems	20
Characterization of powder flow properties from micron to nanoscale using FT4 powder rheometer and PT-X powder tester	20
Design optimization of guide vane for mitigating elbow erosion using computational fluid dynamics and response surface methodology	20
Particle convective heat transfer near the wall in a supercritical water fluidized bed by single particle model coupled with CFD-DEM	19
Application of dynamic image analysis to the optical characterisation of fibrous bulk material	19
Influence of calendering process on the structural mechanics and heat transfer characteristics of lithium-ion battery electrodes via DEM simulations	19
The divergence of nearby trajectories in soft-sphere DEM	19
A clean disposal method of carbide slag with carbon emission reduction: Used as a flux for iron ore sintering	19
Soft coarse-grained particle model for particle-fluid systems	19
Review of the research on the development and utilization of clay-type lithium resources	19
Experimental study on filtration performance of the moving bed granular filter with axial flow	19
Characterizing dynamic load propagation in cohesionless granular packing using force chain	19
Turning teawaste particles into magnetic bio-sorbents particles for arsenic removal from wastewater: Isotherm and kinetic studies	19
Mixing and heat transfer of binary mixtures of monodispersed spherical particles with different densities and thermal diffusivities	18
Aerosol optical properties and its direct radiative forcing over Tibetan Plateau from 2006 to 2017	18
Convective drying of wood chips: Accelerating coupled DEM-CFD simulations with parametrized reduced single particle models	18
Effects of static bed height on pressure fluctuations and phase hold-ups in fluidized bed flotation column	18
Research on discrete element parameter calibration of ore particles based on Tavares breakage model in a SAG mill	18
Enhanced bioavailability and biosafety of cannabidiol nanomicelles for effective anti-inflammatory therapy	18
Grinding mechanism of wet vertical spiral stirred mill based on DEM-CFD: Role of grinding sphere motion	18
Fully resolved simulations of viscoelastic suspensions by an efficient immersed boundary-lattice Boltzmann method	17
Fragmentation of fuel pellets during transport via a belt conveyor: A design of experiment study	17
Numerical simulation of the effect of coaxial and cross-axis injection modes on pulverized coal combustion in the raceway of blast furnace tuyere	17
MP-PIC simulation of circulating fluidized beds using an EMMS based drag model for Geldart B particles	17
Experimental characterization and CFD simulation of gas maldistribution in turbulent fluidization of Group A particles	17
Editorial Board	17
Editorial Board	17
Ultra-homogeneous Cu2−xSe nanoparticles as near-infrared II plasmonic phototheranstics for photothermal/chemodynamic synergistic therapy of liver cancer	17
Balancing particle properties for practical lithium-ion batteries	17
One-step synthesis of hierarchically porous fly ash-based NaX zeolite as assisted by CTAB for low-concentration CO2 adsorption	17
Advanced electrode processing of lithium ion batteries: A review of powder technology in battery fabrication	17
Effect of different components in cement raw meal on carbothermal reduction of NO in flue gas: An experimental study	16
Simulation of the deformable lateral boundaries in biaxial test using DEM	16
Numerical study on hydrodynamics of gas–solids circulating fluidized bed with L-valve	16
A simulation study for a cost-effective PET-like detector system intended to track particles in granular assemblies	16
The potential of starch-chitosan blends with poloxamer for the preparation of microparticles by spray-drying	16
Preparation of baicalin colon-targeted granules and its intervention effect on ulcerative colitis in rats	16
Revealing the correlation between structural evolution and long-term cyclability of the LiNi0.5Co0.2Mn0.3O2/artificial graphite pouch cells at various rates	16
Settling and spreading behaviour of particle clusters in quiescent liquids in confined vessels	16
Preparation of Mg,N-co-doped lignin adsorbents for enhanced selectivity and high adsorption capacity of As (V) from wastewater	16
Multi-objective optimization of laser perforated fuel filter parameters based on artificial neural network and genetic algorithm	15
Particulate aggregation through a modulated annular one-dimensional acoustic field at resonant frequencies	15
Mixing and segregation of binary mixtures of biomass and silica sand in a fluidized bed	15
Measurement of acceleration and angular velocity of particles during a 3D silo discharge	15
Micro-flow structure at regime transition from bubbling to turbulent fluidization in a fluidized bed	15
An approach to determine settling properties of flocculated tailings suspensions based on a single batch settling test	15
Novel self-assembled porous yolk-shell NiO nanospheres with excellent electrochromic performance for smart windows	14
A modified PVDF-HFP/PMMA crosslinked co-polymer for high-performance all-solid-state lithium metal batteries	14
Lithium polysulfide solvation and speciation in the aprotic lithium-sulfur batteries	14
Investigations into the flow dynamics of mixed biomass particles in a fluidized bed through Hilbert-Huang transformation and data-driven modelling	14
Investigation of the flotation behavior and interaction characteristics of micro-fine quartz and magnesite in a dodecylamine system under ultrasonic treatment	14
Improved suspension quality and liquid level stability in stirred tanks with Rotor-Stator agitator based on CFD simulation	14
The structure of colloidal polyethylenimine–silica nanocomposite microparticles	14
Multi-scale numerical simulation of fluidized beds: Model applicability assessment	14
Modulation of reactive oxygen species to enhance sonodynamic therapy	14
Editorial Board	14
Effect of cylinder wall parameters on the final packing density of mono-disperse spheres subject to three-dimensional vibrations	13
Investigation on the influence of vortex generator on particle resuspension	13
A core-shell composite pigment with rutile TiO2 intensification for UV inhibition	13

A meso-scale flow model of gas-liquid-solid mini-fluidized beds with improved macro-scale interaction of wall effects	13
Hydrodynamics of a bubble-induced inverse fluidized bed reactor with a nanobubble tray	13
Enrichment of surface charge contributes to the stability of surface nanobubbles	13
Anisotropic robustness of talc particles after surface modifications probed by atomic force microscopy force spectroscopy	13
High-entropy sulfurization enables efficient non-noble metal-based NiCoFeCuS electrocatalyst for alkaline oxygen evolution reaction	13
X-ray imaging techniques for gas–solid fluidized beds: A technical review	13
Tailoring V2CTx to form a derivative hybrid by partial oxidation for enhanced lithiation behavior	13
Effect of impeller rotational speed and paddle angle on binary mixing in a paddle mixer based on DEM	12
Research on the cuttings discharge in air cushion chamber of slurry shield based on CFD-DEM coupling method	12
Hydroxyapatite composites with carbon allotropes: Preparation, properties, and applications	12
Macro-microscopic dynamic characteristics of the ballast bed induced by the variation of moisture content	12
Nanofluids: Critical issues, economics and sustainability perspectives	12
Cataracting-centrifuging transition investigation using nonspherical and spherical particles in a rotary drum through CFD simulations	12
Collaborative optimization of linear vibrating screen screening efficiency and dynamic response stability based on coupled DEM-MBK simulation	12
Targeted therapeutic effects of oral magnetically driven pectin nanoparticles containing chlorogenic acid on colon cancer	12
A new method for identifying flow pattern of spouted fluidized bed by coupling Hilbert–Huang transform characteristics of differential pressure signals in different zones	12
Experimental investigation about the incipient velocity of spherical particles on a hemispherical bed surface	12
Influence of stearic acid surface modification on flowability and agglomeration of battery grade Li2CO3 powder	12
Numerical simulation study on particle breakage behavior of granular materials in confined compression tests	12
DEM analysis of the influence of stirrer design on die filling with forced powder feeding	12
Using waste to treat waste: Red mud induced hierarchical porous γ-AlOOH and γ-Al2O3 microspheres as superior Pd support for catalytic reduction of 4-nitrophenol	12
GPU accelerated MFiX-DEM simulations of granular and multiphase flows	12
Identification of coexistence of biological and non-biological aerosol particles with DAPI (4′,6-diamidino-2-phenylindole) stain	12
A novel method for modeling the phase change of iron ore particles in the cohesive zone of a blast furnace	12
Impact of the polydispersion of TiO2 materials on their particle size calculated from specific surface area results obtained during an interlaboratory comparison exercise	12
Copper metal-functionalized carbon from rattan waste via microwave pyrolysis for enhanced chloramphenicol removal: Optimization and F-test study	11
Application of solvent evaporation technique for pure drug crystal spheres preparation	11
Numerical investigations on gas–solid flow in circulating fluidized bed risers using a new cluster-based drag model	11
Cutting-edge recycling solution at pilot-scale for end-of-life LiFePO4 batteries and recovery of graphite using centrifuge filtration	11
CFD simulation and optimization of an industrial cement gas–solid air classifier	11
Preparation of pistachio shell-based porous carbon and its adsorption performance for low concentration CO2	11
Strength and friction dependency of the stress Lode angle in true triaxial configurations: A discrete element perspective	11
Discrete element-embedded finite element model for simulation of soft particle motion and deformation	11
Innovative construction of macroporous–mesoporous structured spherical alumina and its hydrothermal stability	11
Investigation on the particle loss and applicability of aviation nvPM measurement methodology for wide particle size ranges	11
Origin of enhanced electrochemical performance in lithium-rich cathode materials via the fast ion conductor Li2O-B2O3-LiBr	11
Molecular dynamics study of water molecules nucleation for fine particle removal: Effects of wettability and aggregation modes and comparison with experiment	11
Physics informed neural network model for multi-particle interaction forces	11
Preparation of slow-release regulated Rs-198 bilayer microcapsules and application of its lyophilized bacterial inoculant on Capsicum annuum L. under salt stress	11
Combustion characteristics of millimeter-sized aluminum particles in fluidized bed under various O2/CO2/H2O atmospheres	11
Transient flameout process of boron-magnesium agglomerates during combustion in oxygen-rich atmospheres	11
Particle size distribution in a multi-zone circulating fluidized bed polymerization reactor	11
Microfluidic platform serves as controllable fabrication of binary Mo/Ir nanodots/carbon hetero-material for efficient electrocatalytic nitrogen reduction	11
Research on the macro- and meso-mechanical properties of frozen sand mold based on Hertz-Mindlin with Bonding model	11
Investigation of drying process of non-spherical particle in a pulsed fluidized bed	11
A new method for precise optical measurements of the sub-micron height of levitation of droplet clusters	11
Biotransformation, multifunctional recycling mechanism of nanostructures, and evaluation of the safety of nanoscale materials	11
Preface	10
Influence of ammonia and Brown gas injection on the iron ore sintering characteristics under biochar substitution	10
Coupled simulation of fluid-particle interaction for large complex granules: A resolved CFD-DEM method for modelling the airflow in a vertical fixed bed of irregular sinter particles	10
Engineering lattice defects in 2D nanomaterials for enhancing biomedical performances	10
Optimization of variables and assessment of in-vitro and in-vivo antihyperlipidemic activity of Eudragit RS nanoparticles containing simvastatin	10
The flow behavior of powder stearin-based methyl ester sulfonates and the effect of glidant	10
Influence of wire spacing and plate spacing on electrostatic precipitation of nanoparticles: An approach involving electrostatic shielding and diffusion charging	10
A novel energy-efficient way to prepare solid lipid microspheres loaded with nanoscale drugs by combining LLPS and in-situ crystallization	10
Numerical investigation on dynamic characteristics of flow field in cyclone separators with different dust hopper structures	10
Chemical components of PM2.5 in different seasons in Harbin, China	10
Analysis of synthetic parameters for coating aluminum powders with phenyltriethoxysilane coupling agent and their effects on powder flow behavior	10
Synthesis of TiCl2 powders through reactive gas phase infiltration in a fluidized bed reactor	10
Arch formation mechanism and discharge process of cohesive fine powder in a vibrated silo	10
Interpretable machine learning analysis and automated modeling to simulate fluid-particle flows	10
A review on the scale-up of high-shear wet granulation processes and the impact of process parameters	10
Reynolds number dependence of particle transport in a 90° bend with electrostatic effects	10
Kinetic model of vibration screening for granular materials based on biological neural network	10
On the determination of particle impact breakage in selection function	10
Enhanced solar absorption and steam generation in lithium bromide-based modified copper oxide nanofluids under simulated solar flux	9
Advances in controlled-release fertilizer encapsulated by organic-inorganic composite membranes	9
Programmed nanoparticle-loaded microparticles for effective antigen/adjuvant delivery	9
Editorial Board	9
Axial segregation characteristics and size-induced flow behavior of particles in a novel rotary drum with curved sidewalls	9
Hydrodynamic characteristics of a rectangular gas-driven inverse liquid-solid fluidized bed	9
Improved mesh-free SPH approach for loose top coal caving modeling	9
Modelling of dust emissions induced by flow over stockpiles and through packed beds	9
Synthesis of Mn/Co-MOF for effective removal of U(VI) from aqueous solution	9
Stepwise shape optimization of the surface of a vibrating screen	9
Two-dimensional silica enhanced solid polymer electrolyte for lithium metal batteries	9
Effects of particle size reduction due to wear on heat transfer in a fluidized bed: A CFD-DEM study	9
Pollutant emissions from biomass burning: A review on emission characteristics, environmental impacts, and research perspectives	9
Editorial Board	9
Shear-induced particle segregation in binary mixtures: Verification of a percolation theory	9
A review on the hydraulic performance and erosion wear characteristic of the centrifugal slurry pump	9
Initial equilibrium droplet size distribution at the swirl separator with progressive process	9
A green path to extract carbon quantum dots by coconut water: Another fluorescent probe towards Fe3+ ions	9
Numerical prediction of particle slip velocity in turbulence by CFD-DEM simulation	9
Micro-sized nanoaggregates: Spray-drying-assisted fabrication and applications	9
Nucleation and growth of MOF-based composite materials for electrochemical energy storage	9
Research progress on simulation of multiscale mass transfer processes in gas-solid system by computational mass transfer	9
Development of a two-stage virtual impactor for the generation of micrometer-scale monodisperse aerosols	9
Editorial Board	9
Modelling the formation and dissolution behavior of alumina agglomerate in the cryolite	9
Eulerian simulations of bubbling and jetting regimes in a fluidized bed	9
Effects of thermophoresis on Brownian coagulation of spherical particles over the entire particle size regime	9
Characterisation of the granular dynamics at the interface between a pipe and a granular flow in a rotating drum	9
Cross-linked α-amylase aggregates on Fe3O4 magnetic nanoparticles modified with polydopamine/polyethyleneimine for efficient hydrolysis of starch	9
An assessment of steady-state conditions in single slug horizontal pneumatic conveying	9