International Journal of Minerals Metallurgy and Materials

Article	Citations
Instrumented oscillographic study on impact toughness of an axle steel DZ2 with different tempering temperatures	234
In situ carbon coating for enhanced chemical stability of copper nanowires	130
Fabrication and performance of 3D co-continuous magnesium composites reinforced with Ti2AlNx MAX phase	126
Effects of Si/Al, Na/Al, and H2O/Na2O molar ratios on formaldehyde barrier properties of inorganic aluminosilicate coatings	110
Preparation of silver nanoparticles through the reduction of straw-extracted lignin and its antibacterial hydrogel	107
Recent progress on transition metal-based amorphous ribbons as electrocatalysts for water splitting	90
Highly dispersed NiMo@rGO nanocomposite catalysts fabricated by a two-step hydrothermal method for hydrogen evolution	89
Interface behavior of chalcopyrite during flotation from cyanide tailings	89
Growth kinetics of titanium carbide coating by molten salt synthesis process on graphite sheet surface	88
Effects of Li addition on the microstructure and tensile properties of the extruded Mg-1Zn-xLi alloy	87
Erratum to: Solid-state impedance spectroscopy studies of dielectric properties and relaxation processes in Na2O-V2O5-Nb2O5-P2O5 glass system	83
Recycling and recovery of spent copper—indium—gallium—diselenide (CIGS) solar cells: A review	69
A thermodynamic perspective on electrode poisoning in solid oxide fuel cells	66
Hydrometallurgical detoxification and recycling of electric arc furnace dust	64
Solid-state reaction of a CaO-V2O5 mixture: A fundamental study for the vanadium extraction process	60
Combining the 8-hydroxyquinoline intercalated layered double hydroxide film and sol—gel coating for active corrosion protection of the magnesium alloy	59
Multi-interface structure design of bamboo-based carbon/Co/CoO composite electromagnetic wave absorber based on biomimetic honeycomb-shaped superstructure	59
Instantaneous transition of composition and morphology of inclusions with an initial Al2O3 composition in the molten steel during calcium treatment	59
Preparation of CIP@TiO2 composite with broadband electromagnetic wave absorption properties	58
Hydration reactivity difference between dicalcium silicate and tricalcium silicate revealed from structural and Bader charge analysis	57
Numerical simulation on the multiphase flow and reoxidation of the molten steel in a two-strand tundish during ladle change	57
Recovery and regeneration of LiFePO4 from spent lithium-ion batteries via a novel pretreatment process	57
Research progress in interface modification and thermal conduction behavior of diamond/metal composites	56
Design principles in MOF-derived electromagnetic wave absorption materials: Review and perspective	56
Modified Al negative electrode for stable high-capacity Al—Te batteries	55

Mechanical properties of Al-15Mg2Si composites prepared under different solidification cooling rates	55
New role of α phase in the fracture behavior and fracture toughness of a β-type bio-titanium alloy	53
Enhancing performance of low-temperature processed CsPbI2Br all-inorganic perovskite solar cells using polyethylene oxide-modified TiO2	52
Electrolyte and current collector designs for stable lithium metal anodes	52
Mechanical behavior and response mechanism of porous metal structures manufactured by laser powder bed fusion under compressive loading	50
Microstructure and toughness of thick-gauge pipeline steel joint via double-sided friction stir welding combined with preheating	49
Microstructure and mechanical properties stability of pre-hardening treatment in Al–Cu alloys for pre-hardening forming process	49
Editorial for special issue on advanced materials for energy storage and conversion	47
Erratum to: Strengthening strategy for high-performance friction stir lap welded joints based on 5083 Al alloy	46
Improving creep strength of the fine-grained heat-affected zone of novel 9Cr martensitic heat-resistant steel via modified thermo-mechanical treatment	46
Heterogeneous information phase space reconstruction and stability prediction of filling body-surrounding rock combination	45
Alkyl chain modulation of asymmetric hexacyclic fused acceptor synergistically with wide bandgap third component for high efficiency ternary organic solar cells	45
Construction of enhanced multi-polarization and high performance electromagnetic wave absorption by self-growing ZnFe2O4 on Cu9S5	45
Edge effect during microwave plasma chemical vapor deposition diamond-film: Multiphysics simulation and experimental verification	43
Microscopic damage evolution of anisotropic rocks under indirect tensile conditions: Insights from acoustic emission and digital image correlation techniques	43
Review of the fabrication and application of porous materials from silicon-rich industrial solid waste	42
Effect of deformation parameters on the austenite dynamic recrystallization behavior of a eutectoid pearlite rail steel	42
Fabrication of green one-part geopolymer from silica-rich vanadium tailing via thermal activation and modification	42
Reaction behavior and non-isothermal kinetics of suspension magnetization roasting of limonite and siderite	42
Significantly improved hydrogen storage behaviors in MgH2 with Nb nanocatalyst	41
KOH-assisted aqueous synthesis of bimetallic metal-organic frameworks and their derived selenide composites for efficient lithium storage	41
Structure and corrosion behavior of FeCoCrNiMo high-entropy alloy coatings prepared by mechanical alloying and plasma spraying	41
Effect of Co substitution on the structural, dielectric and optical properties of KBiFe2O5	40
Effects of the extrusion parameters on microstructure, texture and room temperature mechanical properties of extruded Mg–2.49Nd–1.82Gd–0.2Zn–0.2Zr alloy	40
Microstructure and texture evolution of nonoriented silicon steel during the punching process	39
Two-stage dynamic recrystallization and texture evolution in Al-7Mg alloy during hot torsion	38
Enhanced electrochemical performance of Si/C electrode through surface modification using SrF2 particle	38
Surface nanobubble characterization and its enhancement mechanisms for fine-particle flotation: A review	38
Solvent extraction and separation of cobalt from leachate of spent lithium-ion battery cathodes with N263 in nitrite media	38
Effects of chromium on the microstructure and hot ductility of Nb-microalloyed steel	37
Characterization of local chemical ordering and deformation behavior in high entropy alloys by transmission electron microscopy	37
Towards understanding and prediction of corrosion degradation of organic coatings under tropical marine atmospheric environment via a data-driven approach	37
Enhanced detection of ppb-level NO2 by uniform Pt-doped ZnSnO3 nanocubes	36
A literature review of MOF derivatives of electromagnetic wave absorbers mainly based on pyrolysis	36
Promoting the microwave absorption performance of hierarchical CF@NiO/Ni composites via phase and morphology evolution	36
Wall slip behavior of cemented paste backfill slurry during pipeline based on noncontact experimental detection	36
Combined “Gateway” and “Spillover” effects originated from a CeNi5 alloy catalyst for hydrogen storage of MgH2	36
Thermodynamic theory of flotation for a complex multiphase solid–liquid system and high-entropy flotation	36
Editorial for Innovative Young Scientist Special Issue	35
Hematite reduction by hydrogen plasma: Where are we now?	35
Formation and control of the surface defect in hypo-peritectic steel during continuous casting: A review	35
N-doped graphene quantum dot-decorated N-TiO2/P-doped porous hollow g-C3N4 nanotube composite photocatalysts for antibiotic photodegradation and H2 production	35
From waste to wealth: Coal tar residue derived carbon materials as low-cost anodes for potassium-ion batteries	35
Recent progress on Sn3O4 nanomaterials for photocatalytic applications	34
Mica-stabilized polyethylene glycol composite phase change materials for thermal energy storage	33
Ultralight pyrolytic carbon foam reinforced with amorphous carbon nanotubes for broadband electromagnetic absorption	33
Tribological performance under different environments of Ti—C—N composite films for marine wear-resistant parts	32
Recent progress of efficient utilization of titanium-bearing blast furnace slag	32
Depression mechanism of sulfite ions on sphalerite and Pb2+ activated sphalerite in the flotation separation of galena from sphalerite	31
Novel Au nanoparticles-inlaid titanium paper for PEM water electrolysis with enhanced interfacial electrical conductivity	31

Oxidation behavior of FeV2O4 and FeCr2O4 particles in the air: Nonisothermal kinetic and reaction mechanism	31
New process for treating boron-bearing iron ore by flash reduction coupled with magnetic separation	31
New insights into the flotation responses of brucite and serpentine for different conditioning times: Surface dissolution behavior	31
Effect of N2 partial pressure on comprehensive properties of antibacterial TiN/Cu nanocomposite coating	31
Flotation separation of scheelite and calcite using the biopolymer konjac glucomannan: A novel and eco-friendly depressant	30
Effect of organic binders on the activation and properties of indurated magnetite pellets	30
Carbothermic reduction of vanadium titanomagnetite with the assistance of sodium carbonate	30
Metal phosphides and borides as the catalytic host of sulfur cathode for lithium–sulfur batteries	30
Effect of ball milling time on the microstructure and compressive properties of the Fe-Mn-Al porous steel	30
Diffusion and reaction mechanism of limestone and quartz in fluxed iron ore pellet roasting process	30
Absorption properties and mechanism of lightweight and broadband electromagnetic wave-absorbing porous carbon by the swelling treatment	30
Effects of conductive agent type on lithium extraction from salt lake brine with LiFePO4 electrodes	30
Effects of microstructure characteristics on the tensile properties and fracture toughness of TA15 alloy fabricated by hot isostatic pressing	30
Hydrogen-based direct reduction of iron oxide at 700°C: Heterogeneity at pellet and microstructure scales	30
Prediction model for corrosion rate of low-alloy steels under atmospheric conditions using machine learning algorithms	29
Potassium thiocyanate additive for PEDOT:PSS layer to fabricate efficient tin-based perovskite solar cells	29
High-performance triboelectric nanogenerator based on ZrB2/polydimethylsiloxane for metal corrosion protection	29
Phase-field simulation of lack-of-fusion defect and grain growth during laser powder bed fusion of Inconel 718	29
MOFs-derived flower-like cobalt@carbon multiscale hierarchical composites with effective microwave absorption in the low frequency range	28
Solid particle erosion studies of thermally deposited alumina-titania coatings on an aluminum alloy	28
Multiple impacts of trace Tb addition on the secondary recrystallization and magnetostriction of Fe-Ga thin sheet	28
Numerical simulation of microwave-induced cracking and melting of granite based on mineral microscopic models	28
Giant reversible barocaloric effects with high thermal cycle stability in epoxy-bonded (MnCoGe)0.96(CuCoSn)0.04 composite	28
Self-assembled TiO2 hole-blocking layers for efficient perovskite solar cells	27
Hot deformation behavior and microstructure evolution of Mg–Gd–Sm(–Zn)–Zr alloys	27
Chitosan-based triboelectric materials for self-powered sensing at high temperatures	27
Oxygen-assisted zinc recovery from electric arc furnace dust using magnesium chloride	26
Effect of dissolved components of malachite and calcite on surface properties and flotation behavior	26
Simultaneously improving mechanical properties and corrosion resistance of as-cast AZ91 Mg alloy by ultrasonic surface rolling	26
Constructing Al@C–Sn pellet anode without passivation layer for lithium-ion battery	26
Numerical simulation of the deformation risk in thin slab continuous casting process with liquid core reduction	26
Impact of ethanol on the flotation efficiency of imidazolium ionic liquids as collectors: Insights from dynamic surface tension and solvation analysis	26
Single-factor analysis and interaction terms on the mechanical and microscopic properties of cemented aeolian sand backfill	26
Industrial application prospects and key issues of the pure-hydrogen reduction process	26
Erratum to: Influence of process parameters and aging treatment on the microstructure and mechanical properties of AlSi8Mg3 alloy fabricated by selective laser melting	25
Effect of carbonate additive on the microstructure and corrosion resistance of plasma electrolytic oxidation coating on Mg-9Li-3Al alloy	25
Fluidization behavior and reduction kinetics of pre-oxidized magnetite-based iron ore in a hydrogen-induced fluidized bed	25
Construction of 3D porous Cu1.81S/nitrogen-doped carbon frameworks for ultrafast and long-cycle life sodium-ion storage	25
Microstructure and tribological behavior of the nickel-coated-graphite-reinforced Babbitt metal composite fabricated via selective laser melting	25
Synthesis, characterization and magnetic properties of KFeO2 nanoparticles prepared by a simple egg white solution route	25
High-entropy ferrite with tunable magnetic properties for excellent microwave absorption	24
Retrospective and prospective review of the generalized nonlinear strength theory for geomaterials	24
Simultaneously removal of P and B from Si by Sr and Zr co-addition during Al-Si low-temperature solvent refining	24
Effects of aggregate size distribution and carbon nanotubes on the mechanical properties of cemented gangue backfill samples under true triaxial compression	24
Multiproduct and multistage integrated production planning model and algorithm based on an available production capacity network	24
Effects of runner design and pressurization on the microstructure of a high-pressure die cast Mg-3.0Nd-0.3Zn-0.6Zr alloy	24
Structural, magnetic and antibacterial properties of manganese-substituted magnetite ferrofluids	24
Effect of Sr2+ on 3D gel-printed Sr3−xMgx(PO4)2 composite scaffolds for bone tissue engineering	24
Effect of Al content on nanoprecipitates, austenite grain growth and toughness in coarse-grained heat-affected zones of Al–Ti–Ca deoxidized shipbuilding steels	24
Enhanced photocatalytic performance of iron oxides@HTCC fabricated from zinc extraction tailings for methylene blue degradation: Investigation of the photocatalytic mechanism	23
Discharge properties of Mg-Sn-Y alloys as anodes for Mg-air batteries	23
Extraction and recycling technologies of cobalt from primary and secondary resources: A comprehensive review	23
Customization of FeNi alloy nanosheet arrays inserted with biomass-derived carbon templates for boosted electromagnetic wave absorption	23
Surface nanobubbles on the hydrophobic surface and their implication to flotation	23
Designing new low alloyed Mg—RE alloys with high strength and ductility via high-speed extrusion	23
Activity coefficient of NiO in SiO2-saturated MnO-SiO2 slag and Al2O3-saturated MnO-SiO2-Al2O3 slag at 1623 K	23
Heterogeneous interface enhanced polyurethane/MXene@Fe3O4 composite elastomers for electromagnetic wave absorption and thermal conduction	23
Preparation and hydration of industrial solid waste—cement blends: A review	23
Effect of FeO concentration in sinter iron ore on reduction behavior in a hydrogen-enriched blast furnace	23
Microstructure evolution and mechanical properties of Mg-9Al-1Si-1SiC composites processed by multi-pass equal-channel angular pressing at various temperatures	23
Carbonate-activated binder modified by supplementary materials for mine backfill and the associated heavy metal immobilization effects	23
Microstructural evolution during the progressive transformation-induced plasticity effect in a Fe-0.1C-5Mn medium manganese steel	23
Cooperative effect of sodium lauryl sulfate collector and sodium pyrophosphate depressant on the flotation separation of lead oxide minerals from hematite	22
Low-temperature chlorination roasting technology for the simultaneous recovery of valuable metals from spent LiCoO2 cathode material	22
Quantitative micro-electrochemical study of duplex stainless steel 2205 in 3.5wt% NaCl solution	22
Erratum to: Review on biomass metallurgy: Pretreatment technology, metallurgical mechanism and process design	22
Enhancing the mechanical properties of casting eutectic high-entropy alloys via W addition	22
Nanostructured ZnO/BiVO4 I-scheme heterojunctions for piezocatalytic degradation of organic dyes via harvesting ultrasonic vibration energy	22
Effects of heating temperature and atmosphere on element distribution and microstructure in high-Mn/Al austenitic low-density steel	22
Preheating-assisted solid-state friction stir repair of Al-Mg-Si alloy plate at different rotational speeds	21
Enhanced mechanical properties of Mg-3Al-1Zn alloy sheets through slope extrusion	21
Competitive oxidation behavior of Ni-based superalloy GH4738 at extreme temperature	21
Effect of calcination temperature on the pozzolanic activity of maize straw stem ash treated with portlandite solution	21
Review of silicon-based alloys for lithium-ion battery anodes	21
Influence of rare earth Ce on hot deformation behavior of as-cast Mn18Cr18N high nitrogen austenitic stainless steel	21
An Al-Al interpenetrating-phase composite by 3D printing and hot extrusion	21
Influence of deformation on the corrosion behavior of LZ91 Mg—Li alloy	21
Highly efficient nanocatalyst Ni1Co9@graphene for hydrolytic dehydrogenation of sodium borohydride	21
Microstructure and properties evolution of in-situ fiber-reinforced Ag−Cu−Ni−Ce alloy during deformation and heat treatment	21
Fluidized magnetization roasting of refractory siderite-containing iron ore via preoxidation–low-temperature reduction	21

Effect of two-step solid solution on microstructure and δ phase precipitation of Inconel 718 alloy	21
Process—structure—property relationship for plasma-sprayed iron-based amorphous/crystalline composite coatings	21
Prediction of mechanical properties for deep drawing steel by deep learning	20
Synergistic effect of gradient Zn content and multiscale particles on the mechanical properties of Al–Zn–Mg–Cu alloys with coupling distribution of coarse–fine grains	20
Uniform nanoplating of metallic magnesium film on titanium dioxide nanotubes as a skeleton for reversible Na metal anode	20
Numerical and theoretical study of large-scale failure of strata overlying sublevel caving mines with steeply dipping discontinuities	20
Fabrication and properties of silver-based composites reinforced with carbon-coated Ti3AlC2	20
Influence of multiple laser shock peening treatments on the microstructure and mechanical properties of Ti−6Al−4V alloy fabricated by electron beam melting	20
Impact of W alloying on microstructure, mechanical property and corrosion resistance of face-centered cubic high entropy alloys: A review	20
Fe-based amorphous coating prepared using high-velocity oxygen fuel and its corrosion behavior in static lead-bismuth eutectic alloy	20
Deep learning for predictive mechanical properties of hot-rolled strip in complex manufacturing systems	20
Influencing factors and mechanism of iodine-induced stress corrosion cracking of zirconium alloy cladding: A review	20
Development in oxide metallurgy for improving the weldability of high-strength low-alloy steel—Combined deoxidizers and microalloying elements	20
Recent progress in upgrading metallurgical-grade silicon to solar-grade silicon via pyrometallurgical routes	20
Robust ZnS interphase for stable Zn metal anode of high-performance aqueous secondary batteries	20
Electrochemically triggered decoupled transport behaviors in intercalated graphite: From energy storage to enhanced electromagnetic applications	20
Low-firing and temperature stability regulation of tri-rutile MgTa2O6 microwave dielectric ceramics	20
Mineralogical characterization of copper sulfide tailings using automated mineral liberation analysis: A case study of the Chambishi Copper Mine tailings	20
Compressive fatigue behavior and failure evolution of additive fiber-reinforced cemented tailings composites	19
Enhanced recovery of high-purity Fe powder from iron-rich electrolytic manganese residue by slurry electrolysis	19
Research progress of the fundamental theory and technology of rock blasting	19
Coke behavior with H2O in a hydrogen-enriched blast furnace: A review	19
Force and impulse multi-sensor based on flexible gate dielectric field effect transistor	19
Residual stress measurement and analysis of siliceous slate-containing quartz veins	19
Outlier screening for ironmaking data on blast furnaces	19
Secondary phase precipitate-induced localized corrosion of pure aluminum anode for aluminum—air battery	19
Reduced graphene oxide aerogel decorated with Mo2C nanoparticles toward multifunctional properties of hydrophobicity, thermal insulation and microwave absorption	18
Flow zone distribution and mixing time in a Peirce—Smith copper converter	18
Electrochemically functionalized graphene as an anti-corrosion reinforcement in Cu matrix composite thin films	18
State of the art in applications of machine learning in steelmaking process modeling	18
Rock fracture mechanism of buffer blasting with cushion layer at the borehole bottom	18
Preface of special issue for the 70th anniversary of USTB	18
Synthesis and characterization of high-purity SiO2 nanoparticles utilizing greater club rush: Exploring a promising natural source	17
High-performance lithium-sulfur battery based on porous N-rich g-C3N4 nanotubes via a self-template method	17
Rheological behavior of paste in metal mines	17
Editorial for special issue on developments of magnesium alloys for structural and functional applications	17
Kinetics study on the H2 reduction of Nchwaning manganese ore at elevated temperatures	17
Preferentially selective extraction of lithium from spent LiCoO2 cathodes by medium-temperature carbon reduction roasting	17
Upcycling the spent graphite/LiCoO2 batteries for high-voltage graphite/LiCoPO4-co-workable dual-ion batteries	17
Brief review of external physical field-boosted low-temperature electrodeposition for metals and alloys	17
Enhancing mineral processing with deep learning: Automated quartz identification using thin section images	17
Comparison of electrochemical behaviors of Ti-5Al-2Sn-4Zr-4Mo-2Cr-1Fe and Ti-6Al-4V titanium alloys in NaNO3 solution	17
Process and kinetics of the selective extraction of cobalt from high-silicon low-grade cobalt ores using ammonia leaching	17
Influence of grain refinement on the corrosion behavior of metallic materials: A review	16
Insights into the changes in the surface properties of goethite with Ni in the lattice in the presence of salicylhydroxamic acid: Experimental and density functional theory studies	16
Combustion performance of pulverized coal and corresponding kinetics study after adding the additives of Fe2O3 and CaO	16
Experimental and ab initio study of Ba2Na3(B3O6)2F stability in the pressure range of 0–10 GPa	16
Porous high-entropy rare-earth phosphate (REPO4, RE = La, Sm, Eu, Ce, Pr and Gd) ceramics with excellent thermal insulation performance via pore structure tailoring	16
Editorial for special issue on metallurgical process engineering and intelligent manufacturing	16
Microstructure and forming mechanism of metals subjected to ultrasonic vibration plastic forming: A mini review	16
Research progress on selective laser melting processing for nickel-based superalloy	16
Spark plasma sintering of tungsten-based WTaVCr refractory high entropy alloys for nuclear fusion applications	16
Analysis of explosion wave interactions and rock breaking effects during dual initiation	16
Co0.5Zn0.5Fe2O4 modified residual carbon as an excellent microwave absorber	15
Machine learning-assisted efficient design of Cu-based shape memory alloy with specific phase transition temperature	15
Effect mechanism of aluminum occurrence and content on the induration characteristics of iron ore pellets	15
Thermodynamic and thermoelectric properties of titanium oxycarbide with metal vacancy	15
Research progress of CO2 capture and mineralization based on natural minerals	15
Recent research progress on the phase-field model of microstructural evolution during metal solidification	15
Kinetics of solid-state reduction of chromite overburden	15
Numerical simulation of flash reduction in a drop tube reactor with variable temperatures	15
Establishment of NaLuF4:15%Tb-based low dose X-PDT agent and its application on efficient antitumor therapy	15
Structural and microwave absorption properties of CoFe2O4/residual carbon composites	15
Enhanced ferroelectric and improved leakage of BFO-based thin films through increasing entropy strategy	15
Temperature-jump tensile tests to induce optimized TRIP/TWIP effect in a metastable austenitic stainless steel	15
Separation of tungsten and molybdenum with solvent extraction using functionalized ionic liquid tricaprylmethylammonium bis(2,4,4-trimethylpentyl)phosphinate	15
Growth kinetics and mechanism of microarc oxidation coating on Ti−6Al−4V alloy in phosphate/silicate electrolyte	15
A critical review of direct laser additive manufacturing ceramics	15
Multiphysics processes in the interfacial transition zone of fiber-reinforced cementitious composites under induced curing pressure and implications for mine backfill materials: A critical review	15
High-temperature corrosion of sintered RE2Si2O7 (RE = Yb and Ho) environmental barrier coating materials by volcanic ash	15
Microstructure and thermal properties of dissimilar M300-CuCr1Zr alloys by multi-material laser-based powder bed fusion	15
Editorial for special issue on hydrogen metallurgy	14
Preparation and applications of calcium ferrite as a functional material: A review	14
Ultra-broadband microwave absorber and high-performance pressure sensor based on aramid nanofiber, polypyrrole and nickel porous aerogel	14
Effect of annealing treatment on the microstructure and mechanical properties of warm-rolled Mg–Zn–Gd–Ca–Mn alloys	14
Thermal and mechanical properties of MO2 (M = Ti, Zr, Hf) co-doped YTaO4 medium-entropy ceramics	14
Utilization of surface nanocrystalline to improve the bendability of AZ31 Mg alloy sheet	14
Optimizing the overall performance of Cu-Ni-Si alloy via controlling nanometer-lamellar discontinuous precipitation structure	14
Intelligent logistics system of steel bar warehouse based on ubiquitous information	14
Rheological and physicomechanical properties of rod milling sand-based cemented paste backfill modified by sulfonated naphthalene formaldehyde condensate	14
Corrosion engineering on AlCoCrFeNi high-entropy alloys toward highly efficient electrocatalysts for the oxygen evolution of alkaline seawater	14
Literature overview of basic characteristics and flotation laws of flocs	14
Efficient microwave absorption achieved through in situ construction of core-shell CoFe2O4@mesoporous carbon hollow spheres	14
Morphology engineering of ZnO micro/nanostructures under mild conditions for optoelectronic application	14
Review of the electrochemical performance and interfacial issues of high-nickel layered cathodes in inorganic all-solid-state batteries	14
High corrosion and wear resistant electroless Ni-P gradient coatings on aviation aluminum alloy parts	14
Rapid removal of copper impurity from bismuth-copper alloy melts via super-gravity separation	14
Wear behavior of Zn-38Al-3.5Cu-1.2Mg/SiCp composite under different stabilization treatments	14
FeCoNiCrMo high entropy alloy nanosheets catalyzed magnesium hydride for solid-state hydrogen storage	14
Current situation of carbon emissions and countermeasures in China’s ironmaking industry	14
A critical review on nickel-based cathodes in rechargeable batteries	14
Phosphorus reduction behavior of high-phosphate iron ore during hydrogen-rich sintering	14
Intelligent optimization method for the dynamic scheduling of hot metal ladles of one-ladle technology on ironmaking and steelmaking interface in steel plants	13
Microstructure–property relationship of a high strength–toughness Cr–Mo–V steel	13
Effects of high-entropy alloy binders on the microstructure and mechanical/thermal properties of cemented carbides	13