Science China-Technological Sciences

Article	Citations
In situ and on-line monitoring of cadmium in soil pore water using an automatic sampling integrated electrochemical sensor	98
A novel domain decomposition-based model for efficient dynamic predictions of large composite machine tools	92
Boosting the performance of β-Ga2O3/Sn-Ga2O3 n-N homojunction deep ultraviolet photodetector via interfacial Fermi-level reversal	89
Liquid metal-based plant electronic tattoos for in-situ monitoring of plant physiology	85
Retraction Note: Computer-aided design of the effects of Cr2O3 nanoparticles on split tensile strength and water permeability of high strength concrete	84
Impacts of spatially inconsistent permafrost degradation on streamflow in the Lena River Basin	79
Achieving high strength above 400 MPa in conventionally extruded Mg-Ca-Zn ternary alloys	77
Improved data-driven performance of Charpy impact toughness via literature-assisted production data in pipeline steel	76
3D-printed high-stiffness and antiswelling Diels-Alder crosslinked polycarbonate-based polyurethane for meniscal substitution	70
Hydrophobic MAO/FSG coating based TENG for self-healable energy harvesting and self-powered cathodic protection	70
Boosting hydrogen storage performance in COF-108 by single-walled carbon nanotube insertion, boron substitution, and lithium doping at room temperature	64
Planning method of droplet fusion scheduling based on mixed-integer programming	61
Application of ultrasonic fatigue technology in very-high-cycle fatigue testing of aviation gas turbine engine blade materials: A review	59
Experimental study and correlation development for the two-phase frictional pressure drop of flow boiling in copper foam fin microchannels	59
Repaired morphology of CO2 laser rapid ablation mitigation of fused silica and its influence on downstream light modulation	58
Characteristic model-based control of aerial manipulator for improved interaction stability	57
Mechanics of twisted and coiled tube-based artificial muscles driven by hydraulic pressure	55
Fabrication and boiling heat transfer characterization of multi-scale microgroove surfaces	55
Advances in 4D printed shape memory composites and structures: Actuation and application	51
Performance analysis and heat transfer multi-objective optimization of parabolic trough receiver with annular sector inserts	51
Porous fiber paper and 3D patterned electrodes composed high-sensitivity flexible piezoresistive sensor for physiological signal monitoring	50
Hierarchical path planning for multi-arm spacecraft with general translational and rotational locomotion mode	48
Adaptive Takagi-Sugeno fuzzy model and model predictive control of pneumatic artificial muscles	47
Preparation and anti-tumor application of hyaluronic acid-based material for disulfide and copper ions co-delivery	47
Sparse identification-assisted exploration of the atomic-scale deformation mechanism in multiphase CoCrFeNi high-entropy alloys	45

Self-supervised learning-based oil spill detection of hyperspectral images	42
Polymer-based smart fibers and textiles for wearable electronics	42
Emerging direct current triboelectric nanogenerator for high-entropy mechanical energy harvesting	41
On-chip immunomagnetic bead swarm based on magnetic actuation and mechanical vibration for biological detection	40
Multi-locomotion transition of tensegrity mobile robot under different terrains	40
Tough adhesion and antifouling poly(vinyl alcohol) hydrogel coating on the arch wire for antibacterial adhesion	40
Numerical study on waste polyethylene pyrolysis driven by self-sustaining smoldering	39
The effect of applied potential on stress corrosion cracking of X80 pipeline steel in acidic soil containing sulfate-reducing bacteria	39
A novel obstacle avoidance heuristic algorithm of continuum robot based on FABRIK	37
NIR-II responsive Janus nanoparticles amplify immunogenic cell death for enhanced cancer immunotherapy	37
Navigation for autonomous vehicles via fast-stable and smooth reinforcement learning	36
High-quality quasi-monochromatic near-field radiative heat transfer designed by adaptive hybrid Bayesian optimization	36
Efficient high-accuracy north-south station-keeping strategy for geostationary satellites	36
Nano-flower spherical SnS2 combined with a special lithium storage mechanism as a multifunctional separator for lithium-sulfur batteries contributes to ultra-high initial discharge specific capacity	36
Thermoelectric performance of Bi2Sn2Te6 monolayer with ultralow lattice thermal conductivity induced by hybrid bonding properties: A theoretical prediction	35
Distributed swarm control for multi-robot systems inspired by shepherding behaviors	35
Numerical and experimental studies on unsupervised deep Lagrangian learning based rotor balancing method	35
Enhancing forecasting of current-carrying performance through spatial frequency analysis of interface morphology	34
In-situ analysis of laser-induced breakdown spectra for online monitoring of femtosecond laser machining of sapphire	34
A mechanically robust egg white hydrogel scaffold with excellent biocompatibility by three-step green processing	33
Leader-following consensus of stochastic delayed multiagent systems with input saturation under self-triggered impulsive control	33
Development of a general circumferentially nonuniform heat transfer fuel rod model for subchannel analysis and application to helical fuel rods	32
Machine learning-driven insights into biaxial strain-induced anomalous thermal conductivity enhancement of boron arsenide	32
Theoretical analyses of solute concentration-gradient driven water flow and solute concentration variation in solution-saturated semi-permeable materials	32
Enhancing interaction performance of soft pneumatic-networks grippers by skeleton topology optimization	31
Adaptive center error entropy STCKF by using fuzzy-BLS for UAV sensor data denoising	31
A novel hydrodynamic suspension micropump using centrifugal pressurization and the wedge effect	31
Selective separation of oil-in-water emulsion with high efficiency by bio-inspired Janus membrane	30
3D printed β-sheet-reinforced natural polymer hydrogel bilayer tissue engineering scaffold	30
A high-power and high-efficiency mini generator for scavenging energy from human foot movement	30
Experimental determination of heat generation rates of lithium-ion batteries by thermal protection method	29
Solar-driven high-efficiency remediation of wastewater containing small dye molecules	29
A systematic understanding of microbial reductive dechlorination towards an improved “one health” soil bioremediation: A review and perspective	29
High-amplitude pressure fluctuations of a pump-turbine with large head variable ratio during the turbine load rejection process	29
Additive manufacturing of Ti-6Al-4V alloy by hybrid plasma-arc deposition and microrolling: Grain morphology, microstructure, and tensile properties	29
The regulation mechanism and heat transfer enhancement of composite mixed paraffin and copper foam phase change materials	28
Intelligent interaction system based on multimodal conformal triboelectric nanogenerator patch for disabled sports and life	28
Seismic resilient shear wall structures: A state-of-the-art review	27
Concept, configuration, and application of on-board nanogrids for use in electric vehicles	27
Design and experiments of a small resonant inchworm piezoelectric robot	27
Vision-based docking system for an aromatic-hydrocarbon-inspired reconfigurable robot	27
Experimental study on microstructural and corrosion behaviors of friction stir processed steel with CoCrFeCuTi HEA reinforcement and effect of annealing	26
Dual-wavelength extreme ultraviolet camera (EUC) for the Chang’E-7 mission: Scientific objectives and system design	26
Photonics-aided THz-wireless transmission over 400 m at 335 GHz	26
WeldNet: A voxel-based deep learning network for point cloud annular weld seam detection	25
Multitarget gas alarm system for high-performance and anti-interference chemical warfare agents simulants detection	25
Semi-custom methodology to fabricate transmission electron microscopy chip for in situ characterization of nanodevices and nanomaterials	25
Toward a non-invasive cleaning of the wall painting using polyelectrolyte hydrogel	25
Adaptive inter-intradomain alignment network with class-aware sampling strategy for rolling bearing fault diagnosis	24
Low-resistance, high-force, and large-ROM fabric-based soft elbow exosuits with adaptive mechanism and composite bellows	24

Antimicrobial-free knitted fabric as wound dressing and the mechanism of promoting infected wound healing	24
Regularized automatic frequency response function acquisition of a milling robot operating in a high-dimensional workspace	24
Unsupervised construction of health indicator for rotating machinery via multi-criterion feature selection and attentive variational autoencoder	23
DRNet: Towards fast, accurate and practical dish recognition	23
Exciting broadband thermochromic transmission property opposite to vanadium dioxide in the atmospheric window	23
Pilot multi-axis control behavior modeling of receivers in probe-and-drogue aerial refueling	23
Dendrite-free and stable Zn metal anodes with ZnO protective layer	23
Gait trajectory planning and fixed-time fuzzy adaptive control for human-exoskeleton cooperative motion based on dynamic movement primitives	22
Space advanced technology demonstration satellite	22
A residual denoising and multiscale attention-based weighted domain adaptation network for tunnel boring machine main bearing fault diagnosis	22
Fabricating a smart clothing system based on strain-sensing yarn and novel stitching technology for health monitoring	22
Research progress on space charge layer effect in lithium-ion solid-state battery	21
Memristive cyclic three-neuron-based neural network with chaos and global coexisting attractors	21
Liquid metal-based paper electronics: Materials, methods, and applications	21
Laser welding study of vacuum sintered HUST-1 lunar regolith simulant	21
Flexible hybrid electronics: Enabling integration techniques and applications	21
Dependency of the pulsed electrochemical machining characteristics of Inconel 718 in NaNO3 solution on the pulse current	21
Formation of local heterogeneity under energy collection in neural networks	21
Different compositions of TC4/TC11 functional gradient materials interface by wire arc additive manufacturing	20
Preface	20
Modifying effects and mechanisms of superfine stainless wires on microstructures and mechanical properties of ultra-high performance seawater sea-sand concrete	20
Ultrafast investigation of room temperature valley polarization in “optical bilayer” WS2	20
Quasi-periodic pulsations with double periods observed in Lyα emission during solar flares	20
Study on carbon emission calculation method and carbon reduction indexes of urban building stock	20
Robotic telemanipulation with EMG-driven strategy-assisted shared control method	20
Free-standing β-Ta2O5/SWCNTs composite film for high-rate Li-ion storage	20
Simultaneous fabrication of porous metals and metallic nanowires via atmospheric pressure plasma-assisted electro-dealloying	20
Efficient optimization method for variable-specific-impulse low-thrust trajectories with shutdown constraint	19
Design and technology review of the solar X-ray detector onboard the Macao Science Satellite-1B	19
Wearable pressure sensors based on antibacterial and porous chitosan hydrogels for full-range human motion detection	19
Seismic safety assessment of trains running on high-speed railway bridges with chloride-induced corroding piers	19
Autonomous planning and control strategy for space manipulators with dynamics uncertainty based on learning from demonstrations	19
Additive manufacturing of NiTi lightweight porous structures bio-mimicking coral skeleton with enhanced mechanical properties and shape memory functions	19
Stochastic speed prediction for connected vehicles using improved bayesian networks with back propagation	19
Personalized road feel control strategy accounting for drivers’ strength decline	18
Ga-based liquid metal as an extreme pressure lubricant for steel-ceramic pairs	18
A comprehensive review of recent advancements and developments in heat exchanger network synthesis techniques	18
Initiation of dendritic NMDA spikes co-regulated via distance-dependent and dynamic distribution of the spine number and morphology in neuron dendrites	18
An efficient self-reconfiguration method to deploy space modular robots	18
Evolution of electrochemically induced stress and its effect on the lithium-storage performance of graphite electrode	18
A flexible organohydrogel-based humidity sensor for noncontact artificial sensation	18
Facile fabrication of NiCo-hydroxysulfide nanosheets array for electrocatalytic urea oxidation	17
Energy management strategy for hybrid electric vehicle integrated with waste heat recovery system based on deep reinforcement learning	17
Optical transparent metamaterial structure for microwave–infrared-compatible camouflage based on indium tin oxide	17
Shape estimation for a TPU-based multi-material 3D printed soft pneumatic actuator using deep learning models	17
Effects of dimethyl ether and ethanol additions on soot transition in ethylene counterflow diffusion flames	17
Structural topology optimization subject to overhang angle constraint with overhang length relaxation in additive manufacturing	17
Eco-geotechnics for human sustainability	17
Scalable preparation of asymmetrical bilayer sulfide/halide electrolyte membranes for all-solid-state batteries with high voltage	17
State of health estimation for lithium-ion batteries in real-world electric vehicles	17
Anchoring Pt nanoparticles and Ti3C2Tx MXene nanosheets on CdS nanospheres as efficient synergistic photocatalysts for hydrogen evolution	17
Flexible multilayer MEMS coils and their application in energy harvesters	17
Synergistic control of soft robotic hands for human-like grasp postures	17
Multi-objective constructal design for quadrilateral heat generation body based on thermal-entransy theory and NSGA-II	17
Reusable electronic products value prediction based on reinforcement learning	17
Rational design of robust and transparent superrepellent surfaces for long-term marine antifouling	17
A regularization method for delivering the fourth-order derivative of experimental data and its applications in fluid-structure interactions	16
A novel multi-channel CNN-LSTM and transformer-based network for diesel engine misfire diagnosis under different noise conditions	16
Experimental investigation on separation characteristics of axial cyclone separator	16
Temperature dependence of the mechanical and electrical properties of soft-doped lead zirconate titanate under compression and impact	16
On high-performance rotational energy harvesting with a novel cam-like dielectric elastomer generator	16
A breathable, designable and flexible leather–heater used in wearable thermotherapy	16
Adaptive backstepping iteration learning control of nonlinear feedback systems	16
Numerical investigation on the melting of nanoparticle-enhanced phase change materials embedded in porous metal foam	16
Advanced methodologies for the cleaning of works of art	16
Current-carrying tribological behavior of C/Cu contact pairs in extreme temperature and humidity environments for railway catenary systems	16
Carbonization fabrication of a piezoresistive sensor with improved sensitivity via Ni decoration of carbonized cotton fibers	16
Ecological cruising control of connected electric vehicle: a deep reinforcement learning approach	16
Design, modeling, and evaluation of parallel continuum robots: A survey	16
Compressed reactive unit of CaCO3 and Co3O4 with improved solar absorption and energy density for thermochemical energy storage	16
A stereoscope observation of the South Atlantic Anomaly: Initial observations from Macao Science Satellite-1 A&B	16
Helicity-decoupled Ge2Sb2Te5 metasurfaces enable controllable switching between single-layer and cascaded holograms	16
Towards semi-supervised myoelectric finger motion recognition based on spatial motor units activation	16
Internal flow mechanism for a pump-turbine operated in pump mode under double humps condition	15
Disturbance attenuation control of multi-equilibrium switched systems and its application to aero-engines	15
Triboelectric nanogenerator hybrid array driven by multiform natural energies and its applications in self-powered cathodic protection	15
Eddy current loss analysis and frequency optimization design of double-sided LCC-IPT system in seawater environment	15
Application prospect of artificial intelligence in the low-carbon transition of energy system	15
High-performance aqueous asymmetric supercapacitors based on the cathode of one-step electrodeposited cracked bark-shaped nickel manganese sulfides on activated carbon cloth	15
Vibrotactile-based brain switch via a virtual physical system model	15

Thermal fatigue behavior of 441 ferritic stainless steel in air and synthetic automotive exhaust gas	15
A 3-DOF piezoelectric robot with continuous walking gait aiming at cross-scale smooth motion	15
Power output and efficiency optimization of endoreversible non-isothermal chemical engine via Lewis analogy	15
Review on the recent progress of nearly zero energy building frontiers in China	15
ZnS nanolayer coated hollow carbon spheres with enhanced rate and cycling performance for Li-S batteries	15
On hp refinements of independent cover numerical manifold method—some strategies and observations	15
Abiotic transformation of chlorinated organics at the active surface of iron-bearing minerals in soils and sediments	15
Multiplicative Lévy noise-induced transitions in gene expression	14
The effect of ammonia on soot formation in ethylene diffusion flames	14
Thermal-hydraulic performance analysis and multi-objective optimization of a microchannel with staggered semi-elliptical ribs	14
A novel method for vibration signal transmission and attenuation analysis in complex planetary gearboxes	14
Thermal-flow-electric coupling performance analysis of a liquid-immersed battery thermal management system	14
Construction and manipulation of origami-inspired tubular structures with controlled mechanical buckling for collection and transportation of microspheres based on optically induced electrokinetics	14
Effect of low-temperature treatment on bacterial cultivation in bacterial induced mineralization	14
Design to reduce electromagnetic vibration in integral-slot SPM machine considering force modulation effect	14
Improving flexural strength of Ti2C-Ti cermet by hot compressive deformation: Microstructure evolution and fracture behaviors	14
Enhanced thermal isolation in porous thermal barrier coatings by the formation of pore guided thermal-shock cracks	14
Experimental investigations on structural improvement of morphing mechanism for nose cone of aerospace vehicle adopting a bionic redundant constraint strategy	14
A data-driven rolling optimization method for trajectory tracking error prediction of CNC machine tools	14
Impact of EV load uncertainty on optimal planning for electric vehicle charging station	14
Construction of bio-functional Mg/HA composite layered coating for orthopedic application	14
Recent progress in printing flexible electronics: A review	13
A novel method for extracting and optimizing the complex permittivity of paper-based composites based on an artificial neural network model	13
Real-time detection network for tiny traffic sign using multi-scale attention module	13
Topology optimization of simplified convective heat transfer problems using the finite volume method	13
Minimum mass-entransy dissipation profile for one-way isothermal diffusive mass-transfer process with mass-resistance and mass-leakage	13
Facile synthesis of NiMn2S4 nanoflakes on nickel foam for high-performance aqueous asymmetric supercapacitors	13
Solar-powered miniature robot for on-site oil spill treatment under magnetic steering	13
Increasing operational stability of journal bearing in hydraulic suspension micro-pump by herringbone grooved structure	13
Maximum power and corresponding efficiency of an irreversible blue heat engine for harnessing waste heat and salinity gradient energy	13
Remote sensing image encryption algorithm utilizing 2D Logistic memristive hyperchaotic map and SHA-512	13
Plate-based cylinder metamaterial with negative Poisson’s ratio and outstanding mechanical performance	13
Thermal modification of brittle CoFeNi2(Ti3Si5)0.16 eutectic high-entropy alloy by annealing treatment	13
Design and control of deformable quadrotor with varying length arms	13
Effects of rafting on the meso deformation and fracture behaviour of a Ni-based single crystal superalloy at room temperature: In-situ observation and simulation	13
Experimental investigation for ultra-precision cutting of nickel based superalloy with the assistance of magnetic field	13
Nickel-coated polystyrene microsphere electrodes boost power output of silicon nanowire hydrovoltaic devices	13
Oxidating liquid metal interface integrated capacitive pressure detection	13
Serrated chip characteristics and formation mechanism in high-speed machining of selective laser melted Ti6Al4V alloys	13
Tribo-piezoelectric hybrid nanogenerator based on temporary solution template process	13
A DDPG-based solution for optimal consensus of continuous-time linear multi-agent systems	12
A comprehensive set of criteria for evaluating thermal management systems of aerial vehicles	12
In-situ construction of MnCO3@CNTs nanosheets for high-capacity aqueous zinc ion batteries	12
The influence of stress-dependent overpotential on dendrite growth in all-solid-state battery with cracks	12
Robotic cluster machining: Manufacturing revolution for large and complex components	12
Semi-adaptive spectrally normalized identifier based model uncertainty online compensation for racing drones	12
A geometric method based on space arc for pose-configuration simultaneous planning of segmented hyper-redundant manipulators	12
Fault-induced gear meshing modulation sideband extraction and evaluation for fault diagnosis of planetary gearboxes	12
Multi-agent distributed formation control using local information measurements	12
Autonomous flight control with different strategies applied during the complete flight cycle for flapping-wing flying robots	12
Extremum seeking control for UAV close formation flight via improved pigeon-inspired optimization	12
Performance analyses of a novel finned parabolic trough receiver with inner tube for solar cascade heat collection	12
An electromechanical arm model controlled by artificial muscles	12
Hierarchical mesoporous S,N-codoped carbon nanostructures composed of Co/Co-Cu-S/carbon nanoplate arrays on carbon nanofibers as a self-supported air cathode for long-lasting rechargeable Zn-air batte	12
Tailoring the in-plane and out-of-plane stiffness of soft fingers by endoskeleton topology optimization for stable grasping	12
Experimental investigation of the relation between the surface integrity and bending fatigue strength of carburized gears	12
Compressive performance of a foam-filled fiber-reinforced grid beetle elytron plate	12
A bi-layer coordinated power regulation strategy considering system dynamics and economics for isolated hybrid AC/DC multi-energy microgrid	12
Enhanced spray cooling on patterned perforated micromesh surface	12
Design and analysis of a dual-stator brushless doubly-fed induction machine with a staggered dual-cage rotor	12
Seawater hydraulics: From the sea surface to depths of 11000 meters	12
Comparative investigation on the heat transfer performance of an energy storage system with a spiral tube and straight tube: An experimental approach	12
Aquatic unmanned aerial vehicles (AquaUAV): Bionic prototypes, key technologies, analysis methods, and potential solutions	12
Fault-tolerant stator flux oriented decoupling control for dual three-phase permanent magnet motor without diagnosis and reconfiguration	12
A new method based on the shear lag model for accurate determination of ice adhesion shear strength on solid surface	12
Gradient-based attitude planning for rigid spacecraft on SO(3)	11
A decoupled method for time-dependent reliability-based design optimization	11
Energy-efficient firing modes of chay neuron model in different bursting kinetics	11
Human-robot shared control system based on 3D point cloud and teleoperation	11
Natural nori-based porous carbon composite for sustainable lithium-sulfur batteries	11
Seismic assessment of RC frames infilled with innovative CFS walls considering seismic orientation effect	11
Multicentury flow reconstruction at four sites along the Yarlung Zangbo River	11
An incremental elastic-plastic cohesive constitutive model with considering damage	11
Active label-denoising algorithm based on broad learning for annotation of machine health status	11
Precipitation and heterogeneous strengthened CoCrNi-based medium entropy alloy with excellent strength-ductility combination from room to cryogenic temperatures	11
Transient features of graphitization and nitrogen-vacancy color centers in a diamond fabricated by localization femtosecond laser direct writing	11
Perspective on multiple degrees of freedom in crystal materials	11
Identifying dynamical characteristics of directed functional epilepsy networks from eigenmodes	11
Wide measurement range and high sensitivity spongy MWCNT/polydimethylsiloxane pressure sensor based on a single-electrode enhanced triboelectric nanogenerator	11
Mechanical properties and shape memory behavior of 4D printed functionally graded cellular structures	11
HiTL-based adaptive fuzzy tracking control of MASs: A distributed fixed-time strategy	11
Low-frequency metamaterial antenna based on magnetic field coupling effect	11
Phase selection and microstructure evolution within eutectic Ti-Si alloy solidified at containerless state	11
FDNet: Fourier transform guided dual-channel underwater image enhancement diffusion network	11
Ultrafast optical investigation of carrier and spin dynamics in low-dimensional perovskites	11
Synchronous impact phenomenon of a high-dimension complex nonlinear dual-rotor system subjected to multi-frequency excitations	11
Dynamic frequency response characteristics of a compound regulative quasi-zero stiffness air spring system	11
Spatial light modulation for femtosecond laser manufacturing: Current developments and challenges	11
The effects of ripple amplitude on heat transfer and fluid flow of X-lattice corrugated honeycombs	11
Six million Q factor micro fused silica shell resonator with teeth-like tines released by femtosecond laser-assisted chemical etching	11
Demonstration of a 200-m 300 GHz photon-assisted MIMO THz system using PDM and MRC technologies with SNR gain and coherence destruction mitigated	11
Puncture site decision method for venipuncture robot based on near-infrared vision and multiobjective optimization	11
Impacts of multi-foulings on salinity gradient energy conversion process in negatively charged conical nanochannels	11
Bandit neural architecture search based on performance evaluation for operation selection	11
Preparation of graphene-based active carbons from petroleum asphalt for high-performance supercapacitors without added conducting materials	11