OOIR: Observatory of International Research

Papers

(The TQCC of International Journal of Chemical Engineering is 8. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-11-01 to 2025-11-01.)

Article	Citations
Research on the Aerodynamic Noise Characteristics of Heat Exchanger Tube Bundles Based on a Hybrid URANS‐FWH Method	121
Simulation of Multiphase Flow and Mixing in a Conveying Element of a Co-Rotating Twin-Screw Extruder by Using SPH	92
Effects of Pyrrhotite on the Combustion Behavior and the Kinetic Mechanism of Pyrite-Pyrrhotite Mixture Powders in the Air	43
Improving Coffee Bean Drying Performance Using Polydryer (Dryer Assisted with Superabsorbent Polymer)	39
An Experimental Analysis of Lean Binary Mixture Segregation in a Continuous Liquid Fluidized Bed	37
Evaluating the Effectiveness of Low‐Silica X and Copper‐Modified Low‐Silica X Zeolite Adsorbents for Cyanide Ions Removal From Aqueous Solutions	36
Polymer Property Prediction Model for an Industrial Two‐Stage Ethylene‐Propylene Copolymerization Reactor	35
Modified UiO‐66 for the Degradation of Tetracycline Antibiotic Under Solar Irradiations	28
Ghanaian Clay as a Catalyst for Transesterificating Shea Butter Oil as Alternative Feedstock for Green Energy Production	26
Treatment of Mixed Azo Dyes in an Aerobic Sequential Batch Reactor and Toxicity Assessment Using Vigna radiata	26
Numerical Integration of Some Arbitrary Functions over an Ellipsoid by Discretizing into Hexahedral Elements for Biomaterial Studies	25
Modified t-Distribution Stochastic Neighbor Embedding Using Augmented Kernel Mahalanobis-Distance for Dynamic Multimode Chemical Process Monitoring	25
Sequential Geometric Programming Method for Parameter Estimation of a Nonlinear System in Microbial Continuous Fermentation	24
Study on the Effect of Cyclic Loading on the Geomechanics of Sandstone Reservoirs in Gas Storage	22
The Potential of Lignocellulosic Biomass Hydrolysates for Microbial Oil Production Using Yeasts and Microalgae	22
Enhanced Photocatalytic Removal of Congo Red Dye From Water Environment Using Eggshells Infused With Graphitic Carbon Nitride Composites	22
Preparation and Characterization of Alkaline and Acidic Heterogeneous Carbon-Based Catalysts and Their Application in Vegetable Oil Transesterification to Obtain Biodiesel	22
Kinetic Analysis of Aluminum Extraction from Ethiopian Kaolinite Using Hydrochloric Acid	20
An Insight Into the Adsorption of Potentially Hazardous Drugs From Pharmaceutical Wastewater Using Polyaniline–Mucuna Composite (PMC): Multicriteria Analysis	18
Sensitivity Analysis with the Monte Carlo Method and Prediction of Atenolol Removal Using Modified Multiwalled Carbon Nanotubes Based on the Response Surface Method: Isotherm and Kinetics Studies	17
Unravelling the Methylene Blue Adsorption Mechanism on Doped and Nondoped Polyaniline: A Combined Molecular Modeling and Experimental Investigation	17
On the Investigation of Effective Factors on Electronic Structure Properties of Transition Metal Complexes: Robust Modeling Using GPR Approach	17
Experimental Analysis and Improvements of a Visible Spectrophotometer for Detection of Nano Materials	17
Municipal Solid Waste Challenges in Ethiopia and Valorizing the Potential of the Organic Waste Fraction for Composting and Bioenergy	16
Biogas Production through Anaerobic Codigestion of Distillery Wastewater Sludge and Disposable Spent Yeast	16

Identifying the Geographical Origin of Tobacco Leaf by Strontium and Lead Isotopic with Mineral Elemental Fingerprint	16
Biogenic Silica Derived From Sugarcane Bagasse as a Precursor Material for Unmodified SBA‐15: Physicochemical Properties and Their Use in Biodiesel Production From Spent Oil	16
Slow Pyrolysis of Waste Cow Bone for Biochar Production and Its Application in Copper Removal From Acidic Solutions	16
Methylene Blue Adsorption BY UV-Treated Graphene Oxide Nanoparticles (UV/n-GO): Modeling and Optimization Using Response Surface Methodology and Artificial Neural Networks	15
Investigation of Mechanical and Thermal Properties on Novel Wheat Straw and PAN Fibre Hybrid Green Composites	15
Predicting Asphaltene Stability Using Machine Learning Models Based on SARA Analysis	14
Color Removal of Textile Wastewater Using Electrochemical Batch Recirculation Tubular Upflow Cell	14
Domestic Organic Waste: A Potential Source to Produce the Energy via a Single-Chamber Microbial Fuel Cell	13
Estimating the Physical Properties of Nanofluids Using a Connectionist Intelligent Model Known as Gaussian Process Regression Approach	13
Kinetics and Equilibrium Studies of the Adsorption of Copper(II) Ions from Industrial Wastewater Using Activated Carbons Derived from Sugarcane Bagasse	13
Investigating the Adsorption of Humic Acid from Water Using CTS/PAM and CTS/PAM/EDTA Adsorbents	12
Experimental Intensification and Modeling of Solid–Liquid Extraction of Polyphenols From Rice Husk Waste Using Organic Solvents	12
Application of Monod Equation and First‐Order Rate Kinetics for the Calculation of Crude Oil Concentration Along Depths of Stagnant Freshwater and Saltwater Media	11
Geotechnical Investigation and Microanalysis of Black Cotton Soil Amended with Guar Gum and Polyethylene Terephlate Fibre	11
Enhancing Graphene Oxide Production and Its Efficacy in Adsorbing Crystal Violet: An In‐Depth Study of Thermodynamics, Kinetics, and DFT Analysis	10
3D Hollow Mg-Ca-Al Hydrotalcite-Like Compounds Doped with KF for Catalytic Transesterification	10
ZSM-5/γ-Al2O3 Catalysts for Methanol Dehydration: Tuning Pore Structure by Carbon Nanotubes as a Pore-Forming Agent	10
Comparative Investigation on Two Synthesizing Methods of Zeolites for Removal of Methylene Blue from Aqueous Solution	9
Optimization of Dye Removal of Cibacron Red Textile Dye From Wastewaters Using Kombucha Scoby With the Taguchi Method	9
Study on Osmotic Consolidation and Hydraulic Conductivity Behavior of an Expansive Soil Inundated with Sodium Chloride Solution	9
Mechanical Behavior of Aluminum and Graphene Nanopowder-Based Composites	9
New Insight Into Odor Fading in Natural Gas Distribution Networks: Recent Breakthroughs and Challenges	9
Theoretical Analysis of Isentropic Exponent Effects on the Internal Flow of Supercritical CO2 Centrifugal Compressors	9
A Numerical Study of the Effects of Using Reformer Gas on Ignition Characteristics under Dual-Fuel Engine-Relevant Conditions	9
Sisko Hybrid Nanofluid Model for Blood Flow Over an Exponentially Stretched Cylinder Incorporating Homogeneous–Heterogeneous Reactions: A Framework of the Modified Buongiorno Model	9
Comprehensive Modeling in Predicting Liquid Density of the Refrigerant Systems Using Least-Squares Support Vector Machine Approach	9
Economic and Environmental Comparison of the Monosodium Glutamate (MSG) Production Processes from A‐Molasses in an Integrated Sugarcane Biorefinery	9
Effect of Traditional Process Methods on the Physicochemical and Functional Properties of a Traditional Food Salt (Nikkih) Obtained from Waste Biomass Peels of Musa paradisiaca and Musa acuminate	8
Acidithiobacillus ferrooxidans Leaching of Silica‐Sulfide Gold Ores from May‐Hibey Deposits, Tigray, Ethiopia	8
A Retrospective Analysis of Polymer Selection Using Solvent Casting: Formulation and DoE Optimization of the Amorphous Solid Dispersion of Amoxicillin Trihydrate by a Spray Drying Method	8
Catalytic Performance of HZSM‐5–Al₂O₃ Nanocomposites in Glycerol Conversion	8
Reaction Kinetics of Cinnamaldehyde Hydrogenation over Pt/SiO2: Comparison between Bulk and Intraparticle Diffusion Models	8
Silica Coating of Metal-Loaded H-ZSM-22 to Form the Core-Shell Nanostructures: Characterization, Textural Properties, and Catalytic Potency in the Esterification of Oleic Acid	8
Spatial Differentiation of Ecological Stoichiometry of Nitrogen and Phosphorus in Mollic Epipedon of China	8
Characterization and Optimization of Calcination Process Parameters for Extraction of Aluminum from Ethiopian Kaolinite	8