Advances in Materials Science and Engineering

Article	Citations
Response of Partly Recrystallized Microstructure to the Rapid Heat Treatment in TC18 Alloy	87
Synthesis and Characterization of a Novel Bentonite Composite Superabsorbent Resin Based on Starch	86
Compressive Strength Prediction of Self-Compacting Concrete-A Bat Optimization Algorithm Based ANNs	79
Research Progress of Rehabilitation Orthoses Based on 3D Printing Technology	57
Analysis of the Coupling Effect of Thermal and Traffic Loads on Cement Concrete Pavement with Voids Repaired with Polymer Grout	52
Color Stability of Provisional Restorative Materials in Different Mouthwash Solutions	51
Reaction Gas Pressure, Temperature, and Membrane Water Content Modulate Electrochemical Process of a PEMFC: A Simulation Study	46
Parameter Design in Carbonitriding of EN36, 16MnCr5, and AISI 4140 Steels Using Principal Component-Based Grey Incidence (PGI)	45
Microstructural Evolution during Thermal Exposure of G115 Steel and Its Influence on Mechanical Properties	44
Experimental Investigation of Novel Reinforced Composite Panels Made of Cold-Rolled Galvanized Sheets Filled with Foamed Concrete and Fire-Resistance Polyurethane Foam	41
High-Volume Upcycling of Waste Sediment and Enhancement Mechanisms in Blended Grouting Material	39
Experimental Study on Deformation Law of Rectangular Roadway in Horizontal Layered Rock Mass	37
Experimental Study on Mechanical Properties of Cement-Solidified Remolded Soil Reinforces by Polyvinyl Alcohol Fiber	37
Effect of Superabsorbent Polymer (SAP) Internal Curing Agent on Carbonation Resistance and Hydration Performance of Cement Concrete	36
Performance Optimization of Piled Raft Foundations in Layered Soil under Uniform Vertical Loading Using Plaxis 3D	35
Study of Concrete Crack Repair using Bacillus megaterium	34
Experimental Analysis for Nitrogen Oxide Reduction in a Diesel Engine by the Hydrogen-Assisted Selective Catalytic Reduction Technique	33
A Review of the Development Status of Wire Arc Additive Manufacturing Technology	33
Experimental Investigation on Incorporation of Zinc-Ferrite Nanocoated Baffles for Improving the Performance of Field Power Electrical Transformer Integrated with a Solar Air Heater	32
Study on Machinability Behaviour and Simultaneous Optimisation of Multiple Responses Using Taguchi‐Based Grey Relational Analysis in End Milling of Aluminum Hybrid Composites	32
Dynamic Analysis and Fabrication of Single Screw Conveyor Machine	30
Metallographic Investigation on Postweld Heat-Treated0.21%C-1020 Steel Plates Joined by SMAW Method	30
Application of Nanomaterials in Visual Effects of National Costume Pattern Design	29
Retracted: Application of Nanomaterials in Visual Effects of National Costume Pattern Design	29
Retracted: Application of Nanomaterials in the Field of New Energy Environment and Economic Benefit Analysis	29

Optimization Method of High-Speed Train Composite Material Workshop Planning and Scheduling	29
Retracted: Application of Laser Raman Spectroscopy of Ferroelectric Nanomaterial BaTiO3 in the Design of Color Spotlight Products on Stage	28
A Multisensor Data Fusion Based Anomaly Detection (Ammonia Nitrogen) Approach for Ensuring Green Coastal Environment	27
Retracted: Preparation and Supercritical CO2 Foaming of Modified Nanocrystalline Cellulose Reinforced Polylactic Acid Bionanocomposites	27
Retracted: Effect of the Reinforcement Phase on Indentation Resistance and Damage Characterization of Glass/Epoxy Laminates Using Acoustic Emission Monitoring	26
Study on the Relationship between Conspicuous Need and Group Cultural Identity of Fashion Cultural Consumption	26
Retracted: Performance Analysis and Development of a Semiconductor Junction Rectifier with Multicolor Coding for Indoor Farm Applications	26
Retracted: Dynamic Systems Enhanced by Electronic Circuits on 7D	26
Retracted: Research on the Innovation of Procurement Mode of Nanomaterials Based on E-Commerce	26
Retracted: Nanotube Combined with Roller Skater Rehabilitation Therapy in the Treatment of Knee Arthritis	26
Retracted: Simulation Analysis of External Damage and Repair of the Gas Transmission Pipeline	25
Retracted: Mechanical Characterization of Biocomposites Reinforced with Untreated and 4% NaOH-Treated Sisal and Jute Fibres	25
Performance and Exhaust Emission Characteristics of C.I Engine Using Biofuels and Its Diesel Blend with Nano-Additives	24
Modeling and Analysis of Automotive Engine Crankshaft Made of Composite and Functionally Graded Materials	24
Influences of Aqueous Nanofluid Emulsion on Diesel Engine Performance, Combustion, and Emission: IoT (Emission Monitoring System)	23
Research on the Injection Mold Design and Molding Process Parameter Optimization of a Car Door Inner Panel	23
Expression of Concern on “Monitoring of Sports Health Indicators Based on Wearable Nanobiosensors”	22
Monitoring of Sports Health Indicators Based on Wearable Nanobiosensors	22
Synthesis and Properties of Supramolecular Crops Based on PNZST Antiferroelectric Film	22
Construction of Facial Expression Recognition Technology of Intelligent Service Robot Based on Nanofiber Flexible Wearable Electronic Skins	22
Retracted: Metal Cellulose Nanocomposites in Decorative Animation Character Modeling	22
Retracted: Prediction of Escherichia coli Bacterial and Coliforms on Plants through Artificial Neural Network	22
An Enhanced Drone Technology for Detecting the Human Object in the Dense Areas Using a Deep Learning Model	21
Finite Element of Nanoscale Carbon Fiber-Reinforced Concrete Bridge Engineering Monitoring Based on Data Mining Technology	21
Modern Fiber Art Creation Based on Traditional Hakka Hand Tie-Dyeing Process Based on Carbon Nanotube Nanomaterials	21
Retracted: Automatic Measurement of Nanoimage Based on Machine Vision and Powder Metallurgy Materials	21
Retracted: Application of Functional Nanomaterials in Aesthetic Art and Industrial Design Concept	21
An Artificial Intelligence Mechanism for the Prediction of Signal Strength in Drones to IoT Devices in Smart Cities	21
Retracted: Construction of Facial Expression Recognition Technology of Intelligent Service Robot Based on Nanofiber Flexible Wearable Electronic Skins	21
Expressway Asphalt Pavement Technical Status Cluster Dimensional Reduction Evaluation Method	20
Retracted: The Role of Gum Arabic for a Protective Kidney Dysfunction Induced Gentamicin on Diabetes Rats	20
Synthesis of Nano-ZnO Composite Polystyrene Acrylic Emulsion and Its Application in Chinese Painting Pigments	20
The Impact of Family Sustainable Livelihood and Environmental Cognition on Herdsmen’s Choice of Production Behavior	20
Pattern Design of Ethnic Clothing Based on Stretchable Nanofiber Fabrics	20
Retracted: Modified Mechanical Structure Electric Bike Design Computation and Prototype Model Implementation	19
Retracted: Effects of the FR 4 Substrate Realized in a Circularly Polarized UHF-RFID Reader Antenna with Fractal Geometry for Enhancing Parameters	19
Retracted: Steady-State Flow Characteristics and End Clearance Optimization of Internal Gear Grease Pump	19
Thermal Analysis of the Solar Dish Array Concentrator System	19
Retracted: Based on the Application Practice of Multifunctional Nanomaterials in Art Design and Industrial Manufacturing Concept	18
Retracted: Application of Gel Method Ba2TiSi2O8 Ferroelectric Thin Film in Contemporary Handicraft Three-Dimensional Fiber Art Works	18
Retracted: Economic Scheduling Problem of Nanomaterial Import and Export Trade Based on Redundant Data Compression Algorithm and Its Parameter Adjustment Method	17
Retracted: Experimental Investigation and Optimization on Friction Stir Welding of Nylon 6A Using Taguchi and ANOVA with Microstructural Analysis	17
Retracted: Parametric Optimization of Abrasive Water Jet Cutting on AA 5083 through Multiobjective Teaching-Learning Method	17
Interfacial Transport Study of Ultra-Thin InN-Enhanced Quantum Dot Solar Cells	16
Retracted: Microstructure and Fatigue Properties of 6061 Aluminum Alloy Laser-MIG Hybrid Welding Joint	16
Clinical Application of Graphene Composite in Internal Fixation of Ankle Fracture in Sports	16
Retracted: Application of Nanocomposites with Thermal Barrier Coating in Heat Pump Heat Transfer Systems	15
Application of Composite Nano-Bone Transplantation and Massage Exercise Rehabilitation Training in Patients Undergoing Limb Replantation	15
Experimental Analysis and Optimization of Tribological Properties of Self-Lubricating Aluminum Hybrid Nanocomposites Using the Taguchi Approach	14
Retracted: Optimizing the Parameters of Zirconium Carbide and Rice Husk Ash Reinforced with AA 2618 Composites	14

Retracted: Preparation of Mg2Ni Hydrogen Storage Alloy Materials by High Energy Ball Milling	14
The Impact of the Development of Modern Biotechnology and Nanotechnology on the Swimming Sports Industry	14
Heating Properties of Graphene Oxide Nanosheets and Their Application in Clothing Design	14
Wind Tunnel Testing and Validation of Helicopter Rotor Blades Using Additive Manufacturing	14
Retracted: Innovative Application of Nano-Organic Photochromic New Materials in Hakka Traditional Decorative Pattern Design	14
Retracted: Experimental Studies on Mechanical and Thermal Properties of Polyester Hybrid Composites Reinforced with Sansevieria Trifasciata Fibers	14
Retracted: Mechanical Behavior of Silica Fume Concrete Filled with Steel Tubular Composite Column	14
Effect Investigation of Ultraviolet Ageing on the Rheological Properties, Micro-Structure, and Chemical Composition of Asphalt Binder Modified by Modifying Polymer	13
Parameter Optimization of PET Plastic Preform Bottles in Injection Molding Process Using Grey-Based Taguchi Method	13
Tribological Behavior of Ni-P Electroless Coating of Inconel 625 with Multiwall Nano Carbon Tubes	13
Investigation of Mechanical and Tribological Characteristics of Medical Grade Ti6al4v Titanium Alloy in Addition with Corrosion Study for Wire EDM Process	13
Synthesis Optimization of Activated Carbon Driven from Scrap Tire for Adsorbent Yield and Methylene Blue Removal under Response Surface Methodology	13
Sustainable Building Materials and Technologies 2020	13
Re-Alkalization Effect Experiment and a New Re-Alkalization Control Model of Carbonated Concrete	13
Analysis of Bonding Performance of Grouting Corrugated Pipes in Fabricated Bridge Structures	13
Effect of Ceramic Nano Fillers in Jute Fibre Composites	13
Consolidated Drained Triaxial Test on Treated Coastal Soil and Finite Element Analysis Using PLAXIS 2D	13
Design and Simulation of an Environment-Friendly ZrS2/CuInS2 Thin Film Solar Cell Using SCAPS 1D Software	13
Design and Fabrication of Flexible Nanoantenna-Based Sensor Using Graphene-Coated Carbon Cloth	13
Multilayered Electroactive Polyaniline-ZnO Modified GCE for Electrochemical Detection of Paracetamol	13
Numerical Analysis of Microcracks of Fly Ash/Slag Concrete with Cobble as Coarse Aggregate	13
Experimental and Mathematical Studies for Optimality of GTAW Parameters on Similar and Dissimilar Steel Substrates	13
Application of Honeycomb Structures in Key Components of Space Deployable Structures	12
Performance of Polymer Composite Constituted Cabinet Dryer Integrated within a Solar Flat Plate Collector	12
Experimental Investigation on Microstructure and Mechanical Properties of Friction Welded Dissimilar Alloys	12
Investigation of Structure and Optical Properties for Copper Oxide Thin Films on Plastic Substrate by Helicon Plasma DC Magnetron Sputtering Technique	12
Approximate Relationship for the Bond-Slip Using a Concrete Damage-Plastic Model	12
Natural Fiber Incorporated Polymer Matrix Composites for Electronic Circuit Board Applications	12
Experimental Characterizing Mechanical and Physical Properties of Water Lily Polyester Matrix Composite Materials	12
Investigation of Magnesium and Chromium Fillers FSW Dissimilar Joint of AA6063 and AA 5154	12
Mechanical Properties of Bone Particulate and E-Glass Fiber Reinforced Hybrid Polymer Composite	12
Effect of TaC/Ti/Si3N4 Hard Ceramics on Mechanical and Microstructural Behaviour of AA7075 Processed through Stir Casting Process	12
Study on Mechanical Properties and Acoustic Emission Characteristics of Sandstone under Freezing and Thawing	11
Identification and Analysis of Plastic Microparticles in the Inlet and Outlet of the Wastewater Treatment Plant and Investigation of the Relationship between Different Seasons of the Year with the Amo	11
Development of Eco-Sustainable Silica-Reinforced Natural Hybrid Polymer Composites for Automotive Applications	11
Numerical Simulation of Acoustic Emission Events in Supporting Roadways under Different Dynamic Loads	11
Purity Effect of High-Strength Steel on Failure Behavior of Automobile Front Axle	11
Structural, Morphological, Optical, and Antibacterial Activities of Zinc Oxide Nanopowders: A Comparative Study of Green and Soft Chemical Synthesis	11
Microstructure, Mechanical, and Nanotribological Properties of Ni, Ni-TiN, and Ni90Cu10-TiN Films Processed by Reactive Magnetron Cosputtering	10
Effect of Varied Cashew Nut Ash Reinforcement in Aluminum Matrix Composite	10
Effect of Dynamic Stress Produced by Rock Blasting on the Optimal Dimensioning of Room and Pillars in Horizontal Layers	10
Physical and Mechanical Behaviour of Silane-Modified Coconut Inflorecence/Glass Fibril-Fortified Hybrid Epoxy Composites	10
Performance of Rejuvenated Asphalt and Mixtures with Waste Engine Oil Bottom and Liquid Styrene-Butadiene Rubber	10
Reliable Laboratory Tests: A Prerequisite for the Design of High-Quality Slurry Surfacing Mixtures	10
Optimization of Drilling Parameters in Sisal-Human Hair Hybrid Composite Using Grey Relational Analysis	10
Design Method for Concrete Mix Proportion Based on Indices of Strength and Durability of Concrete Exposed to Chloride Attack	10
Study on Response of Regular RC Space Frames Subjected to Equivalent Static Blast Load	10
Continuously Varying Thickness Interference Bandpass Filter for the Visible Spectral Range: Using Ion Beam Sputter Deposition	10
Study on the Contact Stress Distribution Model of Asphalt Mixture Particles	10
Investigation on the Effect of Butyl Acrylate (nBA) to Improve the Toughness Properties of Methacrylate-Based Waterproofing Adhesive Material (MMA) for the Steel Bridge Deck	10
Gelatin Used as a Transductor in an Optical Hygrometer Based on a Fabry-Perot Interferometer	10
Effect of Substrate Material on the Electromagnetic Properties of the Photolithography Printed Antenna	9
Study on Stress Corrosion Properties of 1Cr17Ni2 Stainless Steel	9
Influence of Microalloying Process on Dynamic Mechanical Relaxation of ZrCo-Based Amorphous Alloy	9
Study on the Microstructure of Vanadium-Modified Tungsten High-Speed Steel-Coded SAE-AISI T1 Steel	9
Phase Change Materials in Metal Casting Processes: A Critical Review and Future Possibilities	9
Numerical Modelling, Simulation, and Analysis of the End-Milling Process Using DEFORM-3D with Experimental Validation	9
Improvement of Mechanical Behavior of FSW Dissimilar Aluminum Alloys by Postweld Heat Treatments	9
Air‐Entraining Effect on Rheological Properties of Cement‐Based Mixtures	9
Improved Active Contour Snake Model for Hollow Filter Bar Roundness Inspection	9
Investigation of Effective Parameters Ce and Zr in the Synthesis of H-ZSM-5 and SAPO-34 on the Production of Light Olefins from Naphtha	9
Thermo-Physiological Comfort Property of Military Combat Boot Material for Hot and Cold Climatic Conditions	9
Experimental Study on the Interfacial Bonding Performance of a New Steel Bridge Deck Interface-Bonding Agent	9
Microstructure Effects of the Electrical Discharge Machining Drill on Aerospace Super Alloys	9
Progressive Failure Analysis of Laminated CFRP Composites under Three-Point Bending Load	9
Tribological Characterization of Epoxy Hybrid Composites Reinforced with Al2O3 Nanofiller	9
Studies on Mechanical Attrition and Surface Analysis on Heat-Treated Nickel Alloy Developed through Additive Manufacturing	9
Characterization of a New Fiber from Cyperus Dichrostachus A.Rich Plant	9
Influence of Aggregate and Asphalt Type on the Bond Strength between Asphalt and Aggregates and Its Self-Healing Properties	9
Physicomechanical and Thermal Properties of Particle Board Produced Using Waste Ceramic Materials and Corncob	9
An Investigation into the Evolution Law of Young’s Modulus of Polyurethane Coatings with Diluent Contents by Microstructure-Based Tests	8
Durability Performance of Concrete with Fly Ash as Fine Aggregate Eroded by Chloride Salt	8
Prediction of Fatigue Crack Growth Rate and Stress Intensity Factors Using the Finite Element Method	8
Modification of Asphalt Concrete With Sulfur‐Containing Waste	8
Investigation of the TIG Welding Process for Joining AA6082 Alloy Using Grey Relational Analysis	8
Influence of Silicon Dioxide-Titanium Dioxide Antireflective Electrosprayed Coatings on Multicrystalline Silicon Cells	8
Experimental Investigation of Material Removal Rate Parameters in ECM for Aluminum Hybrid Matrix Composites Using the RSM Technique	8
Monitoring and Analysis of a High-Performance Concrete Shaft Lining: A Case Study	8
Optimization of Process Parameters for Friction Stir Welding of Different Aluminum Alloys AA2618 to AA5086 by Taguchi Method	8
Penetrating Power of High-Density Tungsten Fiber/Zr-Based Metallic Glass Matrix Composite	8

Effect of Recycled Aggregate Content on Water Permeability and Pore Structure of Pervious Concrete Pavement	8
The Properties of the Tide Current and Sediment at a Port of Southern China	8
Strength and Durability Parameters of Brick Aggregate Concrete Incorporating Rice Husk Ash as a Partial Replacement of Cement	8
Acrylic Rubber-Reinforced Halloysite Nanotubes/Carbon Black Hybrid Fillers for Oil Seal Applications: Thermal Stability and Dynamic Mechanical Properties	8
Analysis of Drilling of Coir Fiber-Reinforced Polyester Composites Using Multifaceted Drill Bit	8
Experimental Investigations of Nano Finishing Process on Nickel-Free Austenitic Stainless Steel by Grey Relational and Principal Component Analysis	8
A Recent Trend on Additive Manufacturing Sustainability with Supply Chain Management Concept, Multicriteria Decision Making Techniques	8
Axial Compressive Behavior of Lithium Slag Recycled Coarse Aggregate Concrete-Filled Circular Steel Stub Columns	8
Hydrothermal Synthesis and Photocatalytic Properties of Graphene@Ag/AgSb2O5.8 Composites: Reaction Laws of the Composites in Sintering Process	8
Characterization of Magnesium Potassium Phosphate Cement-Based Grouting Material Blended with High Volume Industrial Wastes	8
Effective Removal of Reactive Yellow 145 (RY145) using Biochar Derived from Groundnut Shell	8
Experimental Study on Temperature Field Evolution Mechanism of Artificially Frozen Gravel Formation under Groundwater Seepage Flow	8
Extraction and Characterisation of Avocado Seed Starch, and Its Blend with Enset Cellulosic	8
A Comprehensive Review on the Optimization of the Fused Deposition Modeling Process Parameter for Better Tensile Strength of PLA-Printed Parts	8
A Computational Method for Acoustic Interaction with Large Complicated Underwater Structures Based on the Physical Mechanism of Structural Acoustics	8
Design and Fabrication of Biodegradable Antenna Using Jute Material for UWB Application	8
A Research on the Biophilic Concept upon School’s Design from Hot Climate: A Case Study from Iraq	8
Analysis of the Effect of the Friction Coefficient on a Pavement Structure	8
Implementation of the Barton–Bandis Nonlinear Strength Criterion into Mohr–Coulomb Sliding Failure Model	8
Research on Shield Tunnelling Parameters Correlation in Composite Strata	7
Polarization and Conduction Characteristics of Mineral Oil and Natural Ester Mixed with Nanoparticles	7
Seismic Evaluation of Advanced Reinforced Concrete Structures	7
Thermal and Waterproof Properties of Foamed Concrete with Nano SiO2 Aerogel and Organosilicon Waterproofing Agent	7
Damage‐Tolerant Woven Glass Fiber Composites Developed Using Polyvinyl Butyral (PVB) Unsaturated Polyester (UP) Blends	7
Interfacial Behaviour of Shield Tunnel Segment Strengthened by Thin Plate at Inner Surface	7
A Performance of a Nanofiber Polymer in Geotechnical Engineering Support	7
Research on the Effect of Curing Temperature, Steel Fiber, and Admixture Content on Concrete Performance Based on Orthogonal Test in Cold Region	7
Overall Instability Failure Mechanism and Monitoring Strategy Research of the Shallow Tunnel under Unsymmetrical Pressure during Operation Period	7
Experimental Analysis of Recycled Aggregate Concrete Beams and Correction Formulas for the Crack Resistance Calculation	7
The Effect of Additive ZRJ-S1 on Mechanical Properties of Portland Cement	7
Characteristics of Pavement Cement Concrete Incorporating Steel Slag Powder	7
Comparative Study of Different Controllers for Levitating Ferromagnetic Material	7
A Study of Contact Detection between Noncircular Particles in Discrete Element Method	7
Study on Creep Mechanical Properties of Non-Water Reacting Polyurethane Grouting Material	7
Effect of Carbon Fiber Admixture and Length on Microwave Deicing Efficiency of Airport Road Surface Concrete	7
The Impact of Multiple Autoclave Cycles on the Surface Roughness of Thermally Treated Nickel-Titanium Endodontic Files	7
Calculation of the Overall Coordination Internal Force of the Grille Beam-Column under the Impact of Debris Flow	7
Road Performance Comprehensive Evaluation of Polymer Modified Emulsified Asphalt Fiber Microsurfacing	7
Analysis of Stress-Strain Relationship of Earthen Soil Based on Molecular Dynamics	7
Theoretical and Experimental Study considering the Influence of T-Stress on the Fracture Behavior of Compression-Shear Crack	7
Experimental Study on Crushing Characteristics of Lignite under Different Load Conditions	7
Optimization of Surface Quality and Power Consumption in Machining Hardened AISI 4340 Steel	7
Experimental Study and Numerical Analysis of Structural Performance of CRTS II Slab Track under Extreme High Temperature	7
Design and Performance Evaluation of Dry-Mixed Cement Recycled Aggregate Pile	7
Effect of FNS Incorporation on the Properties of Ternary Blended Cement Containing Blast Furnace Slag and Fly Ash	7
Effect of CNT-COOH Addition on the Compressive Strength, Chloride Resistance, and Microstructure of Cement Mortar	7
Solar Cells Produced by Diamond Wire Sawn Multicrystalline Silicon Wafer by Using Additive-Assisted Acidic Texturization	7
Chloride Adsorption on EDTA Intercalated MnFe-LDHs: Characterization, Performance, and Application	6
On the Adaptability and Effect of High Damping Rubber Bearings in the Seismic Resistance of Large Aqueducts	6
Corrosion Investigation of Rock Anchors Served over 10 Years in Underground Powerhouse of a Hydropower Station	6
Investigation of Groundwater Hydro-Geochemistry, Excellence, and Anthropoid Wellbeing Hazard in Dry Zones Using the Chemometric Method	6
Experimental Investigation on the Mechanical and Physical Properties of Particleboard From Residual Materials With Lowland Bamboo Chip Composition	6
Adhesion Enhancement on a Duplex DLC HiPIMS Positive Pulse Coating Performed by Active Screen Plasma Nitriding Pretreatment on 316L Stainless Steel Substrate	6
Finite Element Analysis of the Shear Capacity of Recycled Aggregate Concrete Beams with Corroded Stirrups	6
Experimental Investigation on the Effects of Coffee Husk Ash as Partial Replacement of Cement on Concrete Properties	6
Parametric Optimization of Abrasive Water Jet Cutting on AA 5083 through Multiobjective Teaching-Learning Method	6
Optimizing the Synthesis of Novel Calcium Carbonate/Cobalt Oxide Nanocomposite With Highest Antifungal Activity	6
A Study of Structural Parameters Effects on Pressure Differential to Roll Titanium Diaphragm for a Spacecraft Propellant Tank	6
Optimization of Self-Compacting Concrete Containing Blast-Furnace Slag Compositions	6
The Effects of Isolation Pile on the Ground Deformation due to a Deep Pit Excavation	6
Mechanism of Imprinting Process in the Ni-P Metallic Glass Films: A Molecular Dynamics Study	6
Soil Creep Effect on Time-Dependent Deformation of Deep Braced Excavation	6
The Application of Variable Fuzzy Sets Theory on the Quality Assessment of Surrounding Rocks	6
In-Plane Interactive Buckling of High Strength Steel Welded Wide Web I-Section Beam-Columns	6
Forging Temperature Effects on Crack Tip Creep Behaviour of Hot Hammer Forged Ti-6Al-4V Alloy	6
Extraction and Characterization of Cellulose from Coffee Husk and Brewery’s Spent Grain Fibers Using Alkali-Hydrogen Peroxide Treatment Method	6
Permanent Deformation Assessment of Cold Recycled Asphalt Mixtures	6
PFC2D-Based Analysis of the Effect of the Axial Loading Rate on the Mechanical Properties of Backfill	6
Testing and Evaluation of Hard Sandstone Aggregate in Hot Mix Asphalt	6
Electric Discharge Machining of AZ91 Magnesium Hybrid Composites under Different Dielectric Mediums	6
An Investigation on the Influences of Construction Schemes on Backfilling the River-Crossing Section of a Utility Tunnel	6
Development and Application of Analogous Materials for Fluid-Solid Coupling Physical Model Test	6
Container Quay Crane Structural Response under Trolley Traveling	6
Assessing the Prospect of Sustainable Biocomposites Produced From Corn Starch and Reinforced With Jute Spinning Mills Waste	6
A Beam Steering Dielectric Resonator Antenna Designed Using Rogers RO4003C Material for S-Band Applications	6
Study on Road Performance and Electrothermal Performance of Poured Conductive Asphalt Concrete	6
Boron-Doped Graphene Quantum Dots (BGQDs) from Spent Coffee Ground for Glucose Sensor	6
Influence of Marble Powder and Polypropylene Fibers on the Strength and Durability Properties of Self-Compacting Concrete (SCC)	6
Shear Performance of Concrete Beams with a Maximum Size of Recycled Concrete Aggregate	6
Effects of Curing Mode on the Bond Strength of Resin-Modified Glass Ionomer Cements	6
Investigation of Mechanical Behavior and Microstructure Analysis of AA7075/SiC/B4C-Based Aluminium Hybrid Composites	6
Free-Hand versus Surgical Guide Implant Placement	6
Experimental Investigation on Effect of Weight Fraction of Sisal Fiber on Mechanical Properties of Sisal-E-Glass Hybrid Polymer Composites	6
Large-Area Saline-Alkali-Tolerant Rice Growth Environment Monitoring System Based on LoRa+UAV	6
Temperature Effects on Physiochemical Characteristics of Sugar-Based Natural Deep Eutectic Solvents	6
Experimental and Numerical Investigation of Energy Evolution Characteristic of Granite considering the Loading Rate Effect	6
Microstructure Evolution and Work Hardening Behavior of Hot-Rolled DP780 Ferrite/Bainite Dual-Phase Steel	6
Recycling Dam Tailings as Cemented Mine Backfill: Mechanical and Geotechnical Properties	6
Phase-Change Materials, 1/f Noise, and Phase Synchrony	6
Experimental study on removal of phenol formaldehyde resin coating from the abrasive disc and preparation of abrasive disc for polishing application	6
Experimental and Numerical Investigation of Integrated Steel Shear Walls with Varying Web Width-to-Thickness Ratios	6
An Empirical Model for Geopolymer Reactions Involving Fly Ash and GGBS	6
Effect of Mold Flux Containing Ce2O3 on the Contents of Aluminum, Silicon, and Titanium in Incoloy825 Super Alloy	6
Predicting the Spread of Vessels in Initial Stage Cervical Cancer through Radiomics Strategy Based on Deep Learning Approach	6
Prediction of Exit Thickness and Its Compensation after Snake Rolling of Aluminum Alloy Thick Plate	6