Central European Journal of Energetic Materials

Papers
(The median citation count of Central European Journal of Energetic Materials is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2021-04-01 to 2025-04-01.)
ArticleCitations
Explosive Coordination Materials: Acyclic Ligands – Review6
Green Fabrication of Nanoscale Energetic Molecular Perovskite (H<sub>2</sub>dabco)[Na(ClO<sub>4</sub>)<sub>3</sub>] with Reduced Mechanical Sensitivity6
Influence of Liner Wall Thickness on the Penetration Performance of PETN-HTPB PBX-based Shaped Charges into Steel Targets4
Modification of the Physical and Thermal Properties of Glycidyl Azide Polymer Through the Formation of a Star-Shaped Polymer4
A Study of a Protective Container for Combined Blast, Fragmentation and Thermal Effects from Energetic Materials Detonation3
Synthesis of a New Random Copolymer Based on Glycidyl Nitrate and Tetrahydrofuran: A Thermal, Kinetic, and Theoretical Study3
Preparation and Characterization of Porous Carbon/RDX Nanocomposite Energetic Materials3
Prediction of Ignition Delay Times for Amine-based Liquid Propellants through a QSPR Approach3
Review of Methods for Testing the Compatibility of High Energy Mixed Components2
HTPB-based Binder Surrogates and their Effects on Preliminary Rocket Motor Analyses2
Influence of a non-Explosive Filling Included in the Conical Liner Cavity of a Shaped Charge on its Penetrative Capability2
Comparison of the Implemented Detonation Velocity Predictions in the Research Output Software for Energetic Materials Based on Observational Modelling (RoseBoom©) with 31 Experimental Values2
A Comparative Numerical and Experimental Study of Light Weight Materials for Neutralizing Explosive Reactive Armour2
Impact of Seismic and Air-Blast Waves Caused by Civilian and Military Explosions on Critical Infrastructure Facilities2
Effect of Natural Ageing on the Safety Parameters and Performance of TNT-based Melt Cast RDX/TNT Compositions2
Experimental Study on the Diverse Output Performance of a Firearm Firing-Ignition System2
A Literature Review of the Influence of Water on the Properties of Mining Explosives2
Preparation of Graphene-based Cu-MOF Derivative Catalysts and Their Catalytic Performance for Cyclotrimethylenetrinitramine Thermal Decomposition2
A Pressure-Dependent Plasticity Model for Polymer Bonded Explosives under Confined Conditions2
Experimental Study and Numerical Simulation of Explosive Welding of Nickel Foil with Q235 Steel1
Suppression by Water Mist in HMX Explosions1
Ideal Specific Impulse of Solid Rocket Propellants Based on AP/GAP/closo-Dodecaborate ([B12H12]2‒) Salts1
Photo-thermal Decomposition of HNS Surface by 532nm Laser Irradiation: Spectral and Quantitative Analysis using In-Situ XPS- Quadrupole MS Technique1
Modification of the Detonation Parameters of Mining Explosives Containing Hydrogen Peroxide and Aluminium Powder1
Oxidant-Accelerated Polymerization of Dopamine for Coating DNAN with Enhanced Toughness1
Investigation of the Ignition of MTV Decoy Flares1
Study on the Spatial Distribution of Natural Fragments Based on Fractal Model of Fragment Mass Distribution1
Experimental Insight into the Catalytic Mechanism of MFe2O4 (M = Ni, Zn and Co) on the Thermal Decomposition of TKX-501
Modification of Axial Distribution of Fragment Velocity in Preformed Fragmentation Warheads1
Effect of Some Chemical Additives in Increasing the Electrical Conductivity of the Liquid Fuel Dimethyl Aminoethyl Azide (DMAZ)1
The Effect of Humidity and Dopants on the Detection of TNT Vapor by Differential Ion Mobility Spectrometry (DMS)0
Isocyanate-free Carboxyl-terminated Polybutadiene and Epoxidised Hydroxyl-terminated Polybutadiene Cross-linking System as a Binder in Solid Heterogeneous Propellants0
Structure and Properties of Chain Branched Nitrocellulose0
Initiation Strategy of Aimable Warhead Based on Asynchronous Initiation between Lines0
Selective Nitration of Toluene using Nitrogen(V) Oxide in Dichloromethane and Catalysts0
Some Remarks on the Safety of Methane Penthrite Detonating Cords against the Inflammability of a Methane-Air Mixture0
Theoretical Analysis and Numerical Study for Spin Jet Formation Performance0
Influence of Temperature on the Thermal Expansion and Other Physical Properties of Pressed RDX–Wax Explosive Pellets0
Evaluation of the Burning Rate of Black Powder used in Polish Artillery in the 17th Century0
Thermal Hazards Studies for the Azidation Process in the Preparation of Tetra Functional Glycidylazide Polymer (t-GAP) Using a Thermal Screening Unit (TSU)0
Coordination Explosive Materials: Cyclic Ligands – A Review0
Research Output Software for Energetic Materials Based on Observational Modelling 2.2 (RoseBoom2.2©) – Update to Calculate the Specific Impulse, Detonation Velocity, Detonation Pressure and Density fo0
Study on the Trend in Evolution of the Energy Flow in the Axis of Annular Booster Pellets0
Effect of Aluminum Content on the Combustion Performance of HTPB/AP/Al Propellants under High Combustion Pressure0
Verification of Impact Energy Delivered by a Drop Weight0
Rheological Properties of DNAN/HMX Melt-cast Explosives: Maximum Packing Density Calculation and Modified Viscosity Model0
Explosively Formed Penetrators Inflight Heating Compared to Hemispherical Copper Shaped Charge Jet0
Study of the Progress of Reaction in the Preparation of tetra-Functional GAP using FTIR Spectroscopy0
Effects of Azide-Hydroxyl-Terminated Polybutadiene on the Properties of Solid Heterogeneous Rocket Propellants0
Detonation Characteristics of Gaseous Isopropyl Nitrate at High Concentrations0
Preparation and Characterization of a Novel Energetic Cocrystal RDX:TNT (1:2)0
Review of the Methods for Selective Nitration of Toluene0
The Influence of Three Binders on the Properties of BTF-Based Composite Explosive0
Preparation of Imidazolium 2,4,5-Trinitroimidazolate from Derivatives of Imidazole and Its Oxidation Under Nitration Conditions0
Analysis of Standard Methods for Determining the Properties of Explosive Materials in Ukraine0
Exploring the Influence of NC on the Crystallization of HTPE0
Radiative Properties of a Red Phosphorus Based Combustion Flame0
Tuning the Laser Ignition Properties of Nitrocellulose-Nitroglycerine-Hexogen Propellants via Incorporation of Carbon Nanotubes0
Preparation and Characterization of Cationic Energetic Salts of 5-Amino-3-[(2,4,6-trinitrophenyl)amino]-1H-1,2,4-triazole (APATO)0
Effects of Metal Oxides on the Thermal Decomposition Kinetics and Mechanisms of HAN/PVA Based Propellants0
Statistical Approach in Determining Energy Ballistic Parameters of Gunpowder Contained in the 7.62×39 mm Ammunition Based on Measuring the Development of Pressure in a Manometric Bomb0
Thermal Decomposition of Ammonium Perchlorate Encapsulated with Copper(II)/Iron(III) Oxide Nanoparticles0
Studies on the High Performance Characteristics of an Aluminized Ammonium Perchlorate Composite Solid Propellant Based on Nitrile Butadiene Rubber0
Simulation of Stress Relaxation Behaviour of Composite Propellants with Varying Solid Loading Using the Generalized Maxwell Model0
The Flow and Heat Transfer Behavior of Liquid COMP-B3 in Slow Cook-off0
Computational Determination of the Specific Impulse of Solid Rocket Propellant Compositions of closo-Dodecaborate ([B12H12]2‒) Salts with HTPB Binder and Ammonium Perchlorate as an Oxidizer0
Review of the Essential Characteristics of 2,4-Dinitroanisole0
Anisotropic Interfacial Adhesion between Fluoropolymers and RDX Single Crystal Faces0
Hemispherical Zirconium Liner for Advanced Shaped Charge with Enhanced Behind Armor Effect0
Study of Molecular Perovskite (H2dabco)[NH4(ClO4)3]/Carbon Nanotubes Energetic Composite0
Assessment of the Thermal Decomposition Temperature of High-Energy Heterocyclic Aromatic Compounds in Order to Increase Their Safety during Storage, Handling, and Application0
Development and Testing of a Propulsion System for a Space Robot Platform Operating in 2D Microgravity0
Preliminary Analysis of Terrorist Threats Combining Radionuclides and Explosives0
Finite Volume Method for the Combustion Reaction of Energetic Materials0
A New Testing Method for the Mechanical Properties of Elastic Explosive Compositions0
Influence of the Prepolymer Structure of Glycidyl Azide Polymer (GAP) on Binder Properties - Some Theoretical Considerations0
Efficiency of Using Explosive Foam Compositions for Compacting Structurally Unstable Soil0
Comparative Study of the Penetration Characteristics of Ni-Al and Pure Cu Shaped Charge Liners0
Analyzing Safety Measures for Munitions under Different Logistic Configurations Incorporating Large Standard Shaped Charges0
Studies on Curing of an Aluminized Ammonium Perchlorate Composite Propellant Based on Nitrile Butadiene Rubber Using a Quinol Ether of 1,4-Benzoquinone Dioxime0
Stabilized Superthermite Gelled Kerosene: Towards Advanced Green Propellant Systems0
Catalytic Debenzylation of 2,4,6,8,10,12-Hexabenzyl-2,4,6,8,10,12-hexaazatetracyclo [5.5.0.0.3,1105,9] Dodecane with Pd(OH)2/Al2O3 in a Batch Suspension Reactor and Optimization of the Reaction Parame0
Integrating Moisture Isotherms, Compatibility Assessment, and Model Propellant with ADN as an Eco-Friendly Oxidizer0
Experimental Study of the Effectiveness of a Model Reactive Armour without Metal Plates0
Study of the Influence of Sensitizer Content on the Density of a Bulk Emulsion Explosive Used in Underground Operations0
On the Influence of the Liner Shape and Charge Detonation Scheme on the Kinetic Characteristics of Shaped Charge Jets and Explosively Formed Penetrators0
Influence of the Striker Material on the Results of High-Speed Impact at a Barrier0
Mechanical and Sensitivity Properties of Cast PBXs Containing Agglomerated TATB0
Ammonium Dodecahydrododecaborate (NH4)2[B12H12]: Hydrogen and Boron Rich Fuel for Jet Propulsion Engines0
Modern Highly Energetic Materials for the Production of Gun Powders and Rocket Propellants in Poland0
Study on the Effect of DINA on the Polymorphic Transition of ε-CL-20 in Composite Modified Double Base Propellants0
Influence of Liner Form and Explosive on the Velocity and Mechanical Action of a Shaped-Charge Jet0
Preparation and Characterization of a Novel Coordination Compound [K(18-crown-6)][N(NO2)2]0
Study of the Dynamic Processes of Multi-point Initiation of Co-axial Explosively Formed Projectiles with Tail Wings Using High Speed Image Processing Technologies0
0.034486055374146