International Journal of Environmental Science and Technology

Papers
(The TQCC of International Journal of Environmental Science and Technology is 7. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Experimental assessment of bulk vs microfluidic reactors for nano-bio-photocatalyst synthesis and antibiotic degradation293
Comparative study of CO2 and steam activation on carbon-derived tire waste for effective arsenic removal from water255
Feasibility of Fenton-based oxidation for reducing organic content, toxicity, and carbon footprint of automotive industry wastewater241
Reusable lemon juice microwave-activated rice husk biochar for lead and mercury removal in solution215
The relative contributions of iron and aluminum oxides to ferrocyanide retention in soils: a comparative study140
Comparison of classical and sensor-based methods for determination of indoor air quality130
Environmental availability of some trace metals in dredged sediments disposed on-land before use in fired brick processing127
Health risk and heavy metal assessment in soils and vegetables sourced from Amaonye forest Farmland, Eastern Nigeria118
Application of geographic information systems with artificial neural networks technique in prediction of wind energy potential; the case of Isparta Province, Türkiye115
Effects of polyaniline-polyethylene glycol modified with surfactants for Cefazolin removal in aqueous media99
Reducing the transfer kinetics and holdup enhancement of antibiotics in soil by modifying its composition using montmorillonite98
Offshore extinctions: ocean acidification impacting interstitial fauna96
Revisiting bibliometric methods in natural solvent research (Int J Environ Sci Technol. 2024 Jul 1)96
What is the best option for surgical face mask wastes treatment? Integrated LCA and MCDM methodologies94
Significant hydrogen production by Enterococcus faecium IITGEN1 and Proteus mirabilis IITGEN2 newly isolated from local waste sources88
Eco-efficiency assessment of liquid dishwashing detergents88
Automatic extraction of highly risky coastal retreat zones using Google earth engine (GEE)79
Designing long-term scenarios for Iranian electricity sector: a novel integrated scenario planning approach based on MCDM method79
Soil erosion and landslide susceptibility insights based on hierarchical clustering and multilayer perceptron networks: a Nigerian case study75
Optimizing solid waste classification using deep learning and grey wolf optimizer for recycling efficiency72
Valorizing papaya seed waste for wastewater treatment: a review72
Outdoor assessment and modeling of dust deposition impact on optimal tilt angle and operating temperature of photovoltaics69
Innovative synthesis of hybrid nanocomposites based on strontium chromate for malachite green dye removal from aqueous media68
KOH-activated lightweight expanded clay aggregate (LECA) for malachite green adsorption: activation mechanism and adsorption process assessment67
A multi-criteria performance assessment of concentrated solar power plants for site and technology selection in Egypt67
Microalgae-based wastewater treatment system: current state, antibiotic resistant bacteria and antibiotic resistance genes reduction potentials67
The effect of Triton X100 and Tween 80 surfactants on diesel removal from soil using electrokinetic remediation67
Review of natural and anthropogenic emissions of carbon dioxide into the earth’s atmosphere66
Effective synergistic removal of NO and dichloromethane from flue gas based on Ce-modified V-W/Ti catalysts63
Effects of thermo-chemical and enzymatic pre-treatment of tropical seaweeds and freshwater macrophytes on biogas and bioethanol production61
An optimization model for construction project scheduling by considering CO2 emissions with multi-mode resource constraints under interval-valued fuzzy uncertainty61
Characterization of solid waste at the University of Sciences and Arts of Chiapas for sustainable management purposes60
Sustainable consumption has a mediating role in the effect of place attachment on behavior toward sustainable consumption60
Effects of landscape structure on river water characteristics: a multi-scale analysis59
Combined alkaline-activated persulfate and surfactant for remediation of diesel-contaminated soil in permafrost environments: laboratory study59
Carbon nanotube/bentonite @ polyvinylidene fluoride tri-flouro ethylene nanocomposite matrix for surpior elimination of carcinogenic dye from wastewater58
Biosorption of Bromocresol green from aqueous solution by Earliella scabrosa fungal biomass in removal of environmental pollutants57
Correction: Assessment of groundwater sustainability in arid and semi-arid regions using a fuzzy Delphi method54
Adsorptive removal of anionic dye Direct Red 79 in textile wastewater using cationic surfactant modified laterite material52
Biosorption potential of Bacillus anthracis PM21 for the sequestration of cadmium, chromium, and nickel from contaminated water51
Relative importance of climatic and anthropogenic factors on runoff change at watershed scale50
Sustainable approach for photocatalytic and sorptive abatement of crystal violet dye using antimony-doped cerium vanadate (Sb-CeVO4)50
Preparation and optimization of eco-friendly inorganic geopolymer membrane49
Effects of climate change and human activities on environment and area variations of the Aral Sea in Central Asia48
Health risk assessment of potentially toxic elements in dust and soils of used lead-acid battery shops, Nigeria48
Assessing the relationship between digital service trade and carbon emissions: evidence from RCEP countries47
Effects of atmospheric pollution and vegetation on nitrogen and phosphorus content in agri-forest watersheds under climate46
Rare earth elements for enhancing photocatalysis in pollutant degradation and water treatment45
Optimization of the operation process of a continuous flow electrocoagulation reactor for the treatment of dye effluents44
Controlling compressibility in oil-contaminated soils using alkali-activated slag: a sustainable approach44
An image-based deep learning model for water turbidity estimation in laboratory conditions43
Assessing forest health using remote sensing-based indicators and fuzzy analytic hierarchy process in Valmiki Tiger Reserve, India41
Sustainable waste management through constructed wetlands: the role of solid waste substrates in pollutant removal41
Cement industry contributions to soil heavy metals accumulation: spatial patterns, seasonal trends, and geochemical controls41
Colloid and colloid-facilitated contaminant transport in subsurface ecosystem—a concise review41
A comprehensive analysis of the advantages and disadvantages of pulsed electric fields during soil electrokinetic remediation41
Application of residue of degraded waste plastics as a sorbent for the removal of zinc (II) ions39
Occurrence and removal of antibiotic resistant Escherichia coli and antibiotic resistance genes in an urban wastewater treatment plant39
Flow field and pressure characteristics in pulse-jet dust cleaning39
Enhanced boron removal with polyols from geothermal waters by ceramic membrane39
One-step hydrothermally-assisted persulfate treatment: a sustainable approach for highly concentrated denim scrap wastewater39
Evaluation of groundwater quality at Shahid dam site using statistical and geostatistical methods (south of Semirom city, Iran)39
Sustainable integrated oil-palm livestock practice to enhance soil organic matter and carbon sequestration potential39
Analyzing the relationship between lichen biodiversity indicators and disturbances in investigating the quality of forest ecosystems38
Mechanistic insight into amoxicillin removal by natural sepiolite38
Predicting the dust storms using three-hybrid metamodels for integrated dust storm management (case study: Khuzestan Province, Iran)37
Application of chitosan-Acacia nilotica bio-composite for wastewater treatment and significance of RSM-model for parametric optimization37
Utilization of chemically modified coal fly ash as cost-effective adsorbent for removal of hazardous organic wastes37
Energy yield of solar PV in 34 Indonesian cities with respect to various roof pitches and orientations36
Valorization of residual ashes from boiler combustion process into activated carbon for adsorption of food industry wastewater36
Potential application of spent mushroom compost (SMC) biochar as low-cost filtration media in heavy metal removal from abandoned mining water: a review35
Chitosan as an eco-green activator of mesoporous carbon synthesis for methylene blue adsorbent in water35
Evaluation of aluminum slag wastes in ceramic crucibles compositions and investigation of its effects on slurry rheology35
The effect of carbon coating on the arsenite sorption by magnetic carbon nanocomposites35
Characterization of acetylcholinesterase activity in Monodonta lineata: assessing its potential for biomonitoring pollution in southern Morocco35
A high-efficiency Pebax® 1657-based mixed matrix membrane containing molybdenum oxide particles for enhanced CO2/N2 separation34
Synthesis and characterisation of waste-based composites from banana fibre and low-density polyethylene34
Ameliorating textile effluent phytotoxicity in Vigna radiate through biosynthesized Fe/Zn bimetallic nanoparticles: sustainable approach for environmental remediation34
Determination of effluent dilation zone from Laft thermal desalination and providing different scenarios for reducing pollution33
A novel application of activated carbon for pharmaceuticals removal: new insights via experiments and modelling33
Indoor/outdoor BTEX levels & health risks in middle eastern homes: a concentration and risk assessment33
Solid waste sorting using visual and RFID sensing with a collaborative robot33
Analysis of physicochemical properties and bacterial diversity of stevia waste composting: feasibility of waste mud composting33
Fabrication of phosphorus-doped graphitic carbonitride towards the photodegradation of ciprofloxacin and sulfamethoxazole32
Exploring biosorption and bioaccumulation capacities of cyanobacteria Nostoc and Anabaena for remediation of heavy metals in wastewater32
Selective and sensitive detection of aqueous contaminants via coinage metal-enhanced fluorescence with diiminic Schiff bases32
Bioclimatic comfort in urban planning and modeling spatial change during 2020–2100 according to climate change scenarios in Kocaeli, Türkiye32
The application of artificial intelligence to improve the collection and management of separated waste31
Comparison of activated carbons Norit RB4W and Filtrasorb 400 for the removal of vancomycin from water31
Scaling up soil electrokinetic removal of inorganic contaminants based on lab chemical and biological optimizations31
Interrelationship among institutional quality, energy consumption and environmental degradation in Australia: a dynamic autoregressive distributed lag approach31
Correlation between crystallinity index, skin depth, and optical phonon vibration for enhancing Ni2⁺ removal using AC/CaCO3–clay composite30
Microplastic pollution scenario and its effects on public health and ecosystem: a Bangladesh perspective30
A rapid colorimetric method for the determination of lead (II) at low concentrations in aqueous solution30
Novel approach for removal of DOC in samples of raw water using electrocoagulation for drinking water treatment30
Application of membrane bioreactor integrated with ultraviolet disinfection for simultaneous greywater treatment and SARS-CoV-2 removal30
Black cumin bioactive compounds as eco-friendly novel green herbicides in wheat cropping: application to reduce chemical herbicides pollution29
Assessing and mapping the groundwater quality of Taluka Larkana, Sindh, Pakistan, using water quality indices and geospatial tools29
Ion-exchanged commercial-zeolites for O2 production and CO2 capture by swing adsorption technology: a brief review29
Photocatalytic removal of diazinon with Ag-coated SiO2@TiO2 core–shell using the response surface methodology29
Study on the performance of 3D printed layered filler in moving bed biofilm reactor29
Model-based evaluation of three different A2O processes in the presence of carbon and metal dosages29
Eco-friendly organic nanomaterials for multifunctional textiles: sources, applications, recent advances and future prospects towards sustainability29
Evaluation of sewage sludge ash performance in the retention of copper ions from wastewater using quality-by-design approach28
Noise vulnerability assessment using an integrated approach of multi-criteria decision-making model and geospatial techniques28
Intelligent irrigation scheduling scheme based on deep bi-directional LSTM technique28
Vermicomposting of gastro waste does not produce high-quality fertilizer28
Pineapple waste biosurfactant: sustainable soil clean up via optimization, characterization and sorption kinetics28
Phosphorus adsorption of a residue from the pulp and paper industry (grits): contributions to tertiary wastewater treatment28
Novel approach of thionyl chloride detection and disposal using a benzimidazole-based derivative: perspectives and proposals28
Quality simulation of dam reservoir using GP model (case study: ZayandehRoud dam reservoir)28
Sustaining river flow regimes under hydropower regulation and climate change: a modelling approach for lowland rivers27
Start-up and operation of an activated sludge effluent treatment system in an agro-industrial complex27
An investigation of bioleaching and valorization of hazardous zinc plant purification residue using Aspergillus niger27
Arsenic removal from water using iron-modified nanoclinoptilolite: inspired by iron plaque mechanisms in rice roots27
Strategies for enhancing landscape thermal comfort in traffic squares under extreme heat27
Remediation of organophosphate pesticide-contaminated soil using soil washing and advanced oxidation processes26
Self-regenerating hybrid alginate-carbon bioactive beads for gas-phase toluene removal under ambient conditions26
Efficient removal of Ceftriaxone from simulated wastewater using carbonaceous 2D MXenes26
Assessing and geostatistical mapping of metal contamination in the polar arable plot (Yamal-Nenets Autonomous District, Russia)26
Comparative study between GRA and MEREC technique on an agricultural-based MCGDM problem in pentagonal neutrosophic environment26
Hydrothermal carbonization of plastic wastes and effect of influential parameters on performance and challenges: a review26
Life cycle assessment of new bio-based coagulant production for sustainable wastewater treatment26
Assessment of trace element soil contamination and environment risks in soils from iron mining areas26
Vermicompost from sewage sludge: effects on heavy metal presence in soil and bioaccumulation in castor bean25
Minimizing fuel emission by optimizing ship scheduling considering priorities and release times25
Novel green sorbent Aerva Javanica for dyes remediation from aqueous media and future prediction through QSPR modeling25
Developing of HSE management system model and its application in sustainable development planning, based on artificial intelligence25
Evaluation of heavy metals and polycyclic aromatic hydrocarbons pollution in residential, agricultural and commercial soils in Ngong, Kenya25
Reviving River Yamuna: evaluating water quality in Delhi through ground and remote sensing analysis in 202125
Effects of cadmium and nickel interaction on growth and some physio-biochemical indices of Calotropis procera (Aiton) W.T.Aiton24
Naphthalene partitioning from creosote of a contaminated site in Brazil24
Biosynthesis of selenium nanoparticles using Trigonella foenum-graecum L extract and examination of their photocatalytic and cytotoxic properties24
Comment on “A new approach to stabilization of calcareous dune sand” [Int. J. Environ. Sci. Technol. 19, 3581–3592 (2022)]24
Optimization of a two-stage reverse osmosis pilot system for Caspian seawater desalination using response surface methodology: SEC reduction through recovery increase, Fe fouling, and scaling control24
Microbiological methods for removing heavy metals from saline water-based drilling mud: challenges and practical strategies24
Biodegradability of bioplastic film using different regions of Pennisetum purpureum incorporated with gelatine and chitosan24
Facile removal of emerging pollutants using mesoporous TiO2 nanoparticles synthesized via xanthan gum templated greener protocol24
An innovative design of household-scale vermicomposting bin for domestic organic waste treatment24
Novel nafion-palygorskite composite for Pb/Lead treatment23
Correction: Health risk assessment of nitrates and fluorides ingestion and geochemical evaluation of groundwater characteristics in semi-arid regions23
Examination of the performance effects of refrigerants in a multistage refrigeration cycle using advanced exergy analysis23
Meteorological AQI and pollutants concentration-based AQI predictor23
Stable and effective photo-Fenton catalysts of Fe-alginate/PVDF composite electrospun nanofibers for the removal of methylene blue23
Application of the sono-Fenton/UV process on the treatment of table olive processing wastewater23
Monitoring and inversion of Caragana korshinskii in Mu Us Desert for ecological assessment23
Removal of fluoroquinolone antibiotic from wastewater based on immobilized metal affinity mechanism23
Climate change and irrigation expansion in Northwest Minas Gerais, Brazil: the need for hydroclimatic monitoring23
Novel developments in magnetic coagulation: enhancing water and wastewater treatment efficiency23
Analysis and forecast of China's carbon emission: evidence from generalized group method of data handling (g-GMDH) neural network23
Acetate based CaMnO3 thermoelectric material synthesis: effects on efficiency, phase formation, and microstructural change23
Chain-length-dependent perfluorocarboxylic acids partitioning in activated sludge: deciphering the influence of proteins and sludge properties23
The challenges of micropollutants and their environmental detection through biochar-based nanostructured electrochemical sensors: a review23
Effect of chitin, chitosan and NaCMC biopolymers on the consistency limits of organic silt23
Efficient removal of MB dye from wastewater via cadmium ferrite nanocomposites23
Different advanced oxidation processes for the abatement of pharmaceutical compounds23
An efficient hybrid weather prediction model based on deep learning23
Green synthesis of calcium oxide nanoparticles impregnated activated carbon from algal–bacterial activated sludge: its application in ciprofloxacin removal23
A hybrid process of electrocoagulation and electro-Fenton for treatment of paper wastewater22
Soda-based sorbents for HCl removal in the DSI system for agricultural biomass Co-combustion at an industrial scale22
Influence of compositional and structural characteristics on food waste for biogas production22
Development of an ecological attractant for monitoring and controlling Ceratitis capitata using encapsulated Mentha pulegium essential oil22
Modeling neighborhood-level spatial accessibility to urban services using a fuzzy inference system22
Sandwich composite structures for electromagnetic pollution shielding: materials, mechanical performance, and shielding effectiveness22
Caffeine removal from water using rice husk residue biochar: characterization, kinetics and sorption isotherms22
Designing of stable copper ferrite-doped metal–organic framework heterostructure for improved visible light-induced photodegradation of 4-nitrophenol in water21
Assessment of seven different global climate models for historical temperature and precipitation in Hatay, Türkiye21
Urban forests as an approach to mitigate urban heat island effects: Mechanisms, methods, and planning strategies21
Enhancement of cyanobacterial blooms buoyancy by controlling extracellular polysaccharides content and cation concentration under light-limited condition21
Nickel nanoparticles synthesized from Psidium guajava peels mediated degradation of Orange E3 dye reactive dye: a sustainable approach21
Green adsorbent for CO2 adsorption: MgO impregnated palm kernel shell-based activated carbon21
Editorial Expression of Concern: An overview of global energy scenarios by 2040: identifying the driving forces using cross‑impact analysis method21
The effect of temperature and adsorbate concentration on biosorption on Pb and Cu using spent mushroom substrate Coprinus comatus21
Transport of a severe dust storm from Middle East to Indian region and its impact on surrounding environment21
Mobility pattern, risk assessment of heavy metals in soil-dust and hazards of consuming vegetables at auto-body workshops21
Increasing opportunities for component reuse on printed circuit boards using deep learning21
Maximum electrodeposition capacity of Pb on a stainless-steel cathode using a galvanostatic regime21
Natural-based coagulants/flocculants for microplastics and nanoplastics removal via coagulation–flocculation: a systematic review21
Microbe-assisted phytoremediation of domestic and tannery wastewater: in vitro application of a macrophyte mixture for contaminant removal21
Characterization of fouled ultrafiltration membranes from a full-scale wastewater reclamation plant in iron and steel industry20
Cradle-to-factory gate environmental impact of the dairy sector in Haryana, India20
Evaluating machine learning methods for PM2.5 estimation using satellite AOD, low-cost and reference-grade monitors in Kampala20
State-of-the-art modification, mechanistic insight and breakthrough curve analysis of chitosan scaffolds for sustainable heavy metal adsorbent20
Case studies on energy performance of walling materials in various regions20
Recent developments in omics techniques for improving plant abiotic stress using microbes20
Enhanced removal of p-nitrophenol using co-pyrolysis biochar: performance evaluation and mechanistic insights20
6-Stroke water injection engine literature review with an introduction of heat transfer and thermodynamic analysis20
Clustering tall building typologies and analyzing their composite impacts on wind environments in infill development projects19
The identification of valuable climate change adaptation patents based on machine learning approaches19
Ecological modeling of climate change effects on priority  species of the Liliaceae family in Iran19
Using citric acid production waste as a new material for an air humidity sensor19
Enhanced mercury detection through ultrasound-assisted liquid–liquid microextraction and digital image colorimetry using hydrophobic deep eutectic solvents19
Contamination, health risk assessment, and spatial distribution of heavy metals in soils from gold mining district, Ghana19
Assessment of flood susceptibility mapping using integrated multi-criteria decision analysis and machine learning19
Banana plant fiber modified various additives as an advanced adsorbent for heavy metal pollutants: a review19
Classification models for aqueous reaction rate constants of hydroxyl radical with organics19
An investigation of the PM2.5 concentrations and cumulative inhaled dose during subway commutes in Changchun, China19
Assessing the ecological impacts of rural residential land consolidation in China: a synthetic control approach19
For reducing CO2 emissions, what is the most effective: making power plants more efficient or developing renewable resources?19
Advanced treatment of domestic sewage through ceramic ultrafiltration, catalytic ozonation and activated carbon adsorption in pilot-scale study19
Enhanced pollutant removal efficiency in a long-term integrated constructed wetland system using cork and date palm by-products as biomaterials19
New extraction of toluene from water samples based on nano-carbon structure before determination by gas chromatography19
Solar radiation estimation using ANFIS model: evaluation of membership function types and data selection18
Solar driven portable biodiesel reactor for running agrimotor18
Green synthesis of CuO adsorbent using Polygonum sivasicum for efficient adsorptive removal of Tetracycline hydrochloride18
Production and characterization of ginger (Zingiber officinale Roscoe) as adsorbent of glycerol stream from biodiesel production18
Effects of surfactant and oxidant on bioremediation of contaminated soil by total petroleum hydrocarbons using indigenous bacteria18
Biorestoration strategies of a highly weathered mine tailings, Zimapán, México18
Sorption of zinc chloride complexes from acid-based solutions by using anionic resins: process optimization and modelling18
Spatial distribution of some macro nutrients in two land uses using of geostatistical analysis in Shazand area with emphasis on potassium different forms18
A review of the COVID-19 pandemic's effects and challenges on worldwide waste management for sustainable development18
Prevention of COVID-19 pandemic through technological innovation: ensuring global innovative capability, absorptive capacity, and adaptive healthcare competency18
Chromite ore addition to serpentinized magnesite mining wastes for the production of refractory products following thermal treatment18
Cost-effective strategies to improve crop water productivity—case study: Bakhtegan and Maharloo, Iran18
Serial installation of massive weirs impacts the nutrients, solids, chlorophyll, and water chemistry along the river gradient18
Complex interaction patterns between CO2 and air pollution: insights from the Quantile-on-Quantile approach based on temporal decomposition18
Improving artificial intelligence-based air pollution modeling with the application of meteorological data18
Microplastic pollution and characteristics in the surface waters of the middle and lower reaches of the Han River along Hubei Province, China18
Relationship among environmental factors with distribution of genetic types of Avicennia marina in mangrove ecosystems of Iran18
Environmental parameters and habitats of Dorema ammoniacum (D. Don) in south-central Alborz Dorema ammoniacum (D. Don) habitat parameters in south-central Alborz18
Carbon dots synthesized from Hibiscus Tiliaceus L. leaves via microwave-assisted methods as a photocatalyst for sustainable organic transformation18
Comparative study of green synthesis of nanoparticles for removal of oily industrial wastewater by Taguchi method18
Acid-modified coffee grounds biochar for nitrate and nitrite removal: an optimization via central composite design17
Isolation and characterization of a novel bacterial strain Cytobacillus firmus RP5 for the degradation of petroleum hydrocarbons17
Natural and electro-flocculation of Cr, Cd, Co, and Ni during estuarine mixing17
Utilization of supplementary cementitious materials in pervious concrete: a review17
Photocatalytic degradation of polyethylene terephthalate nano and microplastics over ilmenite-graphene oxide nanohybrid17
Fe-Mn-textile waste synthesis for COD and color removal from textile wastewater by UV/S2O82− oxidation17
Correction: Methodology for regularity studies by precision environmental gamma ray spectrometry17
Modelling climatic variable impacts on ground-level ozone in Malaysia using backward trajectory and Generative Additive Models17
16s-RNA sequencing analysis of the influence of UV radiation on the metabolic pathways of pollutants in the A2O process17
The coincineration of sewage sludge and municipal solid waste in an industrial scale incineration power plant17
Crop height estimation of sorghum from high resolution multispectral images using the structure from motion (SfM) algorithm17
Testing the validity of disaggregated agricultural-induced growth–environmental pollution nexus in selected emerging economies17
Simultaneous remediation of soil contaminated by mercury ions and acetochlor using CTAB and DTAB modified bentonites17
Present status and mitigation approaches of arsenic in the environment of Bangladesh: A critical review17
Application of nonwoven microfiltration membrane on activated sludge final effluent: improving wastewater quality for reuse17
Impact of COVID-19 force confinement for CO2 emission, NO2 concentration, and daily traffic congestion throughout EU nations and the United Kingdom (UK)17
Radiation hazards and extremophiles bioaccumulation of radionuclides from hypersaline lakes and hot springs17
Characterization and ecotoxicity of microparticles from polyurethane foam and Luffa cylindrica in Daphnia magna and Artemia salina17
Biosorption of Congo red dye removal from aqueous solution using fennel seed spent and garlic peel16
Performance and characteristics of dynamic membranes for dairy wastewater treatment under anaerobic conditions16
Selection of endophyte and indigenous bacteria degrading textile wastewater in floating treatment wetland16
Investigation of the performance of strontium oxide in carbonation–calcination looping for CO2 capture by the process simulation16
Analysis of the microbial diverisity and the mechanism of simultaneous nitrification and denitrification in high nitrogen environments16
Applications of TiO2–CeO2/bamboo-biochar particle electrodes to enhanced treatment of phenol wastewater in a three-dimensional electrochemical reactors16
Advancement in urban climate change assessment and mitigation technologies16
Response surface optimization of biodegradation in vegetable oil refinery effluent using biochemical oxygen demand analysis16
Characteristics of microplastics in sediment of the Vaal River, South Africa: implications on bioavailability and toxicity16
Combined effects of drought stress and different forms of nitrogen deposition as response mechanism to environmental change16
0.18785190582275