Electronic Materials Letters

Papers
(The median citation count of Electronic Materials Letters is 3. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Surface Functionalization of Indium Tin Oxide Electrodes by Self-assembled Monolayers for Direct Assembly of Pre-synthesized SnO2 Nanocrystals as Electron Transport Layers64
Microstructure, Photoluminescence and Electrical Properties of SmxGd(1−x): SrO Hybrid Nanomaterials Synthesized via Facile Coprecipitation Method35
Electronic, Thermal, and Thermoelectric Properties of Ni-Doped FeTe2 Polycrystalline Alloys33
Investigation of Crystallography and Charge Transfer Dynamics of CeO2–ZnO Nanocomposites Prepared via Facial Thermal Decomposition32
Effect of Pyrene-1 Boronic Acid Functionalization on the Electrical Characteristics of Carbon Nanotube Field-Effect Transistor32
Role of Liquid Metal in Flexible Electronics and Envisage with the Aid of Patent Landscape: A Conspicuous Review25
Enhancement of Hard-magnetic Properties in Mn-Al-Cr Substituted M-type Hexaferrite22
Counteracting Effect of Sn Grain Orientation on Current Crowding in Electromigration Failures of Solder Joints22
Formation and Control of Hexagonal Pyramid Structures from GaN -Based Pillar-Shaped Structures Using Focused Ion-Beam Process21
Fabricating Fe3O4 and Fe3O4&Fe Flower-Like Microspheres for Electromagnetic Wave Absorbing in C and X Bands20
Sulfur Extraction for Stoichiometry Control of Cobalt Sulfides by Reducing Gas Annealing20
Hydrangea Macrophylla-Like CeO2 Coated by Nitrogen-Doped Carbon as Highly Efficient ORR Cathode Catalyst in a Hybrid Proton Battery17
Study on Silane Coupling Agent Treated Silica Nanoparticles Filled High Performance Copper Clad Laminate17
Correction: Thickness-Dependent Electrical and Optoelectrical Properties of SnSe2 Field-Effect Transistors16
Passivation Strategy for High Performance Perovskite Solar Cells Using a Multifunctional Lewis Base Potassium Salt Additive16
Microstructure, Mechanical Properties and Thermal Conductivity of Al-RE-xSi Alloys16
Selective Area Epitaxy of Complex Oxide Heterostructures on Si by Oxide Hard Mask Lift-Off16
Green Synthesis of Ce Doped Cs3MnBr5 for Highly Stable Violet Light Emitting Diodes16
Physical Effects of 2PACz Layers as Hole-Transport Material on the Performance of Perovskite Solar Cell15
Novel Sn-Doped WO3 Photocatalyst to Degrade the Organic Pollutants Prepared by Green Synthesis Approach15
Flexible Strain Sensor Based on AgNWs/MXene/SEBS with High Sensitivity and Wide Strain Range15
Enhanced Light-Scattering Properties of Aqueous Chemical Bath Deposited ZnO Nanowires: Influence of Zinc Source Concentration15
A Simple Intermediate Approach of Sputter Deposition at Room Temperature for Improving the Stability of a-InGaZnO Thin Film Transistors14
Silver Cold Welding Integration and Back Reflector Performance for Optoelectronic Applications14
Interfacial Adhesion Energies of Uniformly Self-Formed Cr2O3 Barriers for Advanced Co Interconnects13
Vertical Pattern of Interconnects to Bypass High Strain Near a Hard Die on a Flexible Substrate Under Mechanical Bending13
Intrinsic Transport Properties of Si-Doped In0.53Ga0.47As Revealed by Variable-Temperature Parallel Dipole Line Hall Measurements13
Correction to: Unraveling Adsorption Behaviors of Levelers for Bottom-Up Copper Filling in Through-Silicon-Via12
Exploring the Electronic Structure and Magnetic Properties of Sm2MgMnO6 Double Perovskite11
Preparation and Xylene Gas Sensing Performances of SnO2/Fe2(MoO4)3 Nanocomposites11
Enhancement in Power Factor of Al-Doped Cu2Se Thermoelectric Compound Prepared by Combustion Synthesis via Spark Plasma Sintering Technique11
3D Organoid Culturing Devices to Induce in Vitro Models of Human Intestinal Inflammation10
Surface Chemical Reactions During Atomic Layer Deposition of Zinc Oxynitride (ZnON)10
Spin Route Flipping in FeCo/RR-P3HT/ NiFe Organic Spin-Valve Device10
A Soluble ‘Ba(Ni-ett)’ (ett = 1,1,2,2-Ethenetetrathiolate) Derived Thermoelectric Material10
Insights on Asymmetrical Electrode Geometric Effect to Enhance Gate-Drain-Bias Stability of Vertical-Channel InGaZnO Thin-Film Transistor10
Morphology Engineering Enables Structural Stability and Kinetics of O3-Na0.87Fe0.5Mn0.5O2 Cathode Material for Sodium-Ion Batteries9
Enhancing Hydrogen Radical Resistance in Graphene-Based EUV Pellicles via Mo and Mo2C Capping Layers9
Improvement in Memory Operation of 2T0C DRAM Cells via Double-Layered InGaZnO Active Channel and Geometry Modulation9
Integration of Ferroelectric and 2D Materials for Next-Generation High-performance Electronics9
Comparative Review of Field-Effect Transistors Based on Three-Dimensional, Two-Dimensional, and Double Halide Perovskites9
Comparison of Diffusion Barrier Properties of Ni–Fe and Ni–Fe–W Layer at the Cu/Sn Interface9
Thickness-Dependent Electrical and Optoelectrical Properties of SnSe2 Field-Effect Transistors9
Correction to: Where to go for the Development of High‑Performance H2 Storage Materials at Ambient Conditions?9
Exploring Fe-Doping Effects in K0.5Na0.5NbO3 (KNN) for Enhancing Electrical and Magnetic Properties9
Engineering Magnetic Type Radio-Absorbers Based on Composites with a Dual-Phase Polymer Matrix9
Eucommia Ulmoides Barks-derived Anodes for Sodium ion Battery and Method to Improve Electrochemical Performances by Modifying Defects9
Development of a Rock-Salt Structure for High Energy Density Lithium-Ion Batteries9
Z-Scheme Charge Transfer in BiOCl/CoWO4 Heterostructures for Enhanced Photocatalytic Removal of Ciprofloxacin and Microplastics8
ZnO/NiO nanofibers prepared by electrostatic spinning for rapid ammonia detection at room temperature8
N-Doped Porous Carbon Encapsulated MnFe2O4 Nanoparticles as Advanced Anodes for Li-Ion Batteries8
The In-Situ TEM Isothermal Aging Evolution in a µ-Cu/NiAu/Sn/Cu Solder Joint for Full Intermetallic Compounds Interconnects of Flexible Electronics8
Core–Shell Grain Structure and High Energy Storage Performance of BNT-Based Relaxor Ferroelectric Ceramics8
The Influence of Nano- and Micron-size of MXene Flakes on the Electrochemical Performance8
Investigation of the Cobalt-Additive Role in Improving the Performance of Formamidium Lead Triiodide Based Solar Cells8
Synthesis of Cross-like TiO2 Thermally Derived from Ammonium Oxofluorotitanate Mesocrystals Under Different Calcination Temperatures and Their Photocatalytic Activity8
Correction: CVD Synthesis of High-quality Continuous Fe-Doped WSe2 Using a Solution-Based Precursor8
Research on In-Situ Grown Graphene-Like Coated Copper Powder and Its Conductive Paste8
Enhancement in the Transport and Optoelectrical Properties of Spray Coated ZnO Thin Films by Nd Dopant8
All-Printing Based, Capacitive Pressure Sensors on Paper7
Enhancing High-Frequency Magnetic Performance of Fe-Based Amorphous Alloy Powders Coated with Insulating Glass Frits7
Characterization of Thermal Conductance of Copper-to-Copper Bonded Interconnects with Metal Passivation for Three-Dimensional Integration7
Thermal Management Performance of Epoxy Composites with Boron Nitride and Boron Phosphide Hybrid Fillers7
Recent Advances in Hafnium Oxide-Based Ferroelectric Thin-Film Transistors with Oxide Semiconductor Channels7
TEM Observations of Metastable Nanocarbon Allotropes in the Initial Stage of Diamond Growth at 300˚C During Diamond Hot Filament CVD7
Synthesis and Electrochemical Investigation of Hetero Bimetallic Complexes CoMn2O4 Micro Rods for Novel Supercapacitor Electrode7
Photoelectrochemical Performance of Tin Selenide (SnSe) Thin Films Prepared by Two Different Techniques7
Low Frequency Magnetoelectric Effect in Bi0.5Na0.5TiO3–Ni0.5Zn0.5Fe2O4 Particulate Composites7
Effect of Ar/N2 Two-Step Plasma Treatments on the Interfacial Characteristics of Low-Temperature Cu-Cu Direct Bonding7
Superhydrophobic Polysilicon Surface Induced by Stearic Acid-treated La(OH)3 Coating7
Amorphous Ni-Fe-Si-B-O Nanosheets for Efficient Electrocatalytic Oxygen Evolution Reaction7
Solvent Exchange in Controlling Semiconductor Morphology7
Recent Advances for Fabricating Smart Electromagnetic Interference Shielding Textile: A Comprehensive Review7
Sezawa Guided Mode on Periodic Grooves of GaN/Sapphire Substrate7
Correction: The Copper Oxide with Alkali Potassium Dopant for Heterojunction Solar Cells Application7
Development of Extreme Ultraviolet Pellicles Based on Yttrium Core with Amorphous Carbon Capping Layer7
Experimental Study on the Preparation of MA@PS@Fe3O4 Phase Change Microcapsules to Inhibit the Development of Electric Branches in Epoxy Resin Cured Compounds6
ZIF-Derived Cobalt Sulfides Embedded on Nitrogen-Doped Carbon Frameworks for Efficient Hydrogen Evolution Reaction6
Correction: Selective Area Epitaxy of Complex Oxide Heterostructures on Si by Oxide Hard Mask Lift-Off6
Development of a Semi-embedded Nanofiber Network in a Micro-wrinkle Structure Based on a Heterogeneous Polymer Bilayer for High-performance Stretchable Conductive Films6
Highly Photosensitive Phototransistor Based on CsPbBr3 NCs-Graphene Mixed Channel6
Impact of Crystal Domain on Electrical Performance and Bending Durability of Flexible Organic Thin-Film Transistors with diF-TES-ADT Semiconductor6
Evaluation of MgCo2O4 Nanoparticles as a Gas Sensor for the Detection of Acetone in the Diabetic and Non-Diabetic Range6
Ternary Organic Solar Cells—Simulation–Optimization Approach6
GIWAXS Analysis on Preferred Orientation in Metal Halide Perovskite Films Via Alkylamines6
Effects of Dielectric Curing Temperature on the Interfacial Reliability of Cu/Ti/PBO for FOWLP Applications6
X-ray Irradiation Induced Near-Infrared Persistent Luminescence from Li2Ge7O15:Cr3+6
Forming-Free and Non-linear Resistive Switching in Bilayer $$\hbox {HfO}_{\textrm{x}}$$/$$\hbox {TaO}_{\textrm{x}}$$ Memory Devices by Interface-Induced Internal Resistance6
In-situ Stress Analysis of Nickel Nanoparticle Sintering with Metal Additive in Multi-Layer Ceramic Capacitors6
Analysis of Physical and Electrical Properties of NiTe2 Single Crystal Grown via Molten Salt Flux Method6
A Dense, Pinholes-free Pure Cubic Phase CsPbBr3 Nanocrystals Film for High-performance Photodetector6
A Neural Network Approach for Health State Estimation of Lithium-Ion Batteries Incorporating Physics Knowledge5
Low Voltage a-IGZO Thin Film Transistor Using Tantalum Oxide by Thermal Oxidation5
Atomic Layer Etching Applications in Nano-Semiconductor Device Fabrication5
Flexible Micro-LEDs: Advanced Fabrication Techniques and Applications5
Copper, Palladium, and Reduced Graphene Oxide Co-doped Layered WS2/WO3 Nanostructures for Electrocatalytic Hydrogen Generation5
A Stepped Mesh Host for Lithium Metal Batteries Inspired by Transmission Electron Microscopy Sampling Grids5
Magnetite–Polyaniline Nanocomposite for Non-Volatile Memory and Neuromorphic Computing Applications5
Room Temperature Synthesis of Perovskite Hydroxide, MnSn(OH)6: A Negative Electrode for Supercapacitor5
Effects of Substrate Bias and Ar Pressure on Growth of α-phase in W Thin Films Deposited by RF Magnetron Sputtering5
Efficient and Selective Oxygen Evolution Reaction in Seawater Electrolysis with Electrochemically Synthesized Amorphous-like NiFeS5
Phenyltrimethylammonium as an Interlayer Spacer for Stable Formamidinium-Based Quasi-2D Perovskite Solar Cells5
Electrochromic Performances of rGO-WO3 Thin Film and Its Application as an Integrated Device Powered with Quantum Dot-Sensitized Solar Cells5
Electromagnetic Interference Shielding Effect on the Strongly Correlated electron System NiWO4 Embedded in PDMS5
High-Sensitivity Enzyme-Free Glucose Sensing and Enhanced Photocurrent Response by a Nanoporous CuO and CuO-ZnO Composite5
Pt, Ag and Au Nanoparticles on Hollow Carbon Spheres as Cathode ORR5
Compressive Sinter Bonding in Air Between Cu Finishes Using Paste Containing Composite Ag2O-Cu Filler5
Eco-friendly Aqueous Binder-Based LiNi0.4Mn1.6O4 Cathode Enabling Stable Cycling Performance of High Voltage Lithium-Ion Batteries with Biomass-Derived Silica5
The Effects of Electrostatic Interactions on Abnormal Growth of Particles Deposited by Charged Nanoparticles During Chemical Vapor Deposition of Silicon5
Effect of Co2+ Doping on Electrochemical Properties of Nickel Metal Tungstate (NiWO4) Positive Material5
Radiation-Tolerant Amorphous Indium–Zinc–Tin–Oxide Thin-Film Transistors4
One-Step Synthesis of Ni-Mo2C/N-Biochar Heterojunction Bifunctional Electrocatalyst from Waste Grapefruit Peel for Efficient Overall Water Electrolysis4
ZnFe2O4/Graphite Composite with High Performance as Anode Material for Lithium-Ion Batteries4
Enhanced Hall Mobility and d0 Ferromagnetism in Li-Doped ZnO Thin Films Prepared by Aerosol-Assisted CVD4
Tuning sp3/sp2 Carbon Hybridization to Realize Highly Durable Gas Diffusion Layers (GDLs) for Fuel Cells4
Effect of Electron Irradiation on Electronic Structure of Ni41Co6Mn43Sn10 Alloys4
Optimization of Sputtering Parameters and Their Effect on Structural and Electrical Properties of CAAC-IGZO Thin-Film Transistors4
Effect of Co-W and Co-Fe-W Diffusion Barriers on the Reliability of the Solder/Cu Interface during Reflow Conditions4
Fabrication of Anodic Aluminum Oxide and Cu Electrode and Improvement of Its Mechanical and Electrical Properties4
Contact and Interface Engineering of MoS2-Based Photodetectors Using Electron-Beam Irradiation4
Sputtered Amorphous Silicon Thin Films Exhibiting Low Argon Working Gas Content and High Film Density4
Two-Dimensional Leafy Fe/N-Doped Carbon Nanomaterials Derived from Vitamin C-Modified ZIF-L for Efficient Oxygen Reduction Reaction4
Device Failure Analysis with Epi-Si Wafer Using Raman Shift Matching Method4
3D Integrated Process and Hybrid Bonding of High Bandwidth Memory (HBM)4
Evaluation of Layered Perovskite PrBaCo1.8Fe0.2O5+δ Cathode for Intermediate-Temperature Solid Oxide Fuel Cell4
Interfacial Engineering of In2O3/In2S3 Heterojunction Photoanodes for Photoelectrochemical Water Oxidation4
Nanoscale Etching of La0.7Sr0.3MnO3 Without Etch Lag Using Chlorine Based Inductively Coupled Plasma4
Phase-Separated 2D PbBiI5 Halide Memristor for Neuromorphic Computing4
High Performance and Flexible Electrodeposited Silver Mesh Transparent Conducting Electrodes Based on a Self-Cracking Template4
Enhanced Lithium Storage Properties of High Sulfur Doped Hard Carbon Derived from Thiophene-Containing Conjugated Microporous Polymer4
Electrodeposited Ternary CuNiMo Catalysts for Alkaline Hydrogen Oxidation4
Boosting Electrochemical Performance of Ni-rich Layered Cathode Via Li2SnO3 Surface Coating and Sn4+ Gradient Doping Based Dual Modification for Lithium-ion Batteries4
Understanding the Electrical Characteristics of Electrochemical Metallization Memristors through Identification of Conduction Channel in Entire Active Area4
Niobium-Based Dry Coating Effect on the Battery Performance of the High-Nickel Layer-Structured Cathode4
The Effect of Solvent Mixing Ratios on the Exfoliation of 2D NiTe2 Thin Films for Transparent Electrodes4
Top-Emitting QLEDs with Thin Stabilizing Layer for Uniform Silver Electrodes4
Soft Magnetic Properties of Amorphous ring Cores Prepared via Spark Plasma Sintering Using Fe-based Amorphous Powders (Fe, Co)68.7(C, Si, B, P)24.5(Mo, Al)6.84
Effects of the Number of Graphene Layers and Graphene Diaphragm Size on High Frequency Electrostatic Speakers4
Perspective: Atomic Layer Deposition Strategies for Surface Passivation of Metal-Halide Perovskite Absorbers4
Multifunctional Green Solvent for Efficient Perovskite Solar Cells3
Recent Progress in Resistive Switching Memory Devices Covering Metal Oxides, Polymers, Bioinspired Materials, and Halide Perovskites3
Effect of Sodiation Temperature on the Electrochemical and Structural Properties of NaNi0.85Fe0.10Mn0.05O2 Cathodes for Sodium-Ion Batteries3
Synthesis of Ultrathin MoO2 Nanosheets via Chemical Vapor Deposition and Their Application to High-Performance Field-Effect Transistors3
Enhanced Electrochemical Performance of Silicon Monoxide Negative Electrodes via Electroless Nickel Plating3
Determination of Particle Size Distribution in Oxide Abrasive Slurry After Chemical Mechanical Polishing Process Using Raman Spectroscopy3
Molecular Beam Epitaxial Growth of α-In2Se3 Thin Films on Hexagonal Boron Nitride and Device Applications3
Synthesis and Properties of Branched-Crosslinked Poly(aryl piperidinium) Anion Exchange Membranes3
ZIFs-Derived Bimetallic Synergistic Cu/FeNC Catalyst for Improving ORR Performance3
Persistence Luminescence and Mechanoluminescence in Er3+/Eu2+ Co-Doped SrS/SrZnSO Composites3
Purification of Alq3 Using Ionic Liquids: Effects on Purity and Mobility for Improved OLED Performance3
Unveiling the Substrate Effect: A Combined Experimental and Simulation Study of Field Emission from Carbon Nanotubes on Stainless Steel and Silicon3
Designing Sandwich Architecture Towards Glass Fiber/Epoxy Reinforced Multi-walled Carbon Nanotube Buckypaper Composites for Electromagnetic Interference Shielding3
Doping and Passivation Effects in Transition Metal Dichalcogenides via HfO2 Thin Film Deposition3
Rapid Thermal Annealing under O2 Ambient to Recover the Deterioration by Gamma-Ray Irradiation in a-IGZO TFTs3
Dielectric Bonding Method for 3D Integration Packaging Using Self-Assembled Monolayer3
Cl2/Ar and Cl2/O2 Inductively Coupled Plasma Etching of (-201) β-Ga2O33
Inorganic Halide Perovskite Quantum Dots for Memristors3
Flexible Air Breathable Electroluminescent Device Based on Electrospinning Process3
Pribramite CuSbSe2: Solid-State Synthesis and Thermoelectric Properties3
Adaptable Low-Temperature Resistor Standard Composed of ITO thin Film3
Effects of Work Function and Thermal Stability of Top Electrode Materials on Electrical Properties of ZrO2-Based DRAM Capacitors3
Synthesis by Electrolysis of Iron-Based Fluoride as Cathode Materials for Lithium Ion Batteries3
Electron-Beam-Induced Formation of Oxygen Vacancies in Epitaxial LaCoO3 Thin Films3
Electrodeposited Hierarchical Silver Network Transparent Conducting Electrodes with Excellent Optoelectronic Properties and Mechanical Flexibility3
Improved Electrochemical Plating for Void-Free Copper Line in ULSI Interconnect3
0.23163199424744