Wood Material Science & Engineering

Article	Citations
Micro geometry analysis of WC-Co carbide blades modified with PVD coating subjected to blunting during milling in chipboard	131
Influence of basic catalyst and organosilane types on dimensional stability and durability of exterior wood cladding	27
Effect of cracks on the load-carrying capacity of glulam	21
A new wood-modification process based on in situ grafting of urethane groups: biological resistance and dimensional stability of carbamylated Scots pine wood	20
Dewatering behavior of wet oil palm sawn timber during flat compression	17
Synergistic reinforcement of foamed polyvinyl acetate with cellulose nanofibrils: mechanical and digital strain insights for plywood panel production	17
A transparent superhydrophobic coating on wood-based panel surfaces	17
Effect of drying temperature on the curing properties of phenolic resin-impregnated heat-treated bamboo bundles	16
Eucalyptus effect of sodium silicate and tung-oil impregnation and coating treatment on the colour and decay resistance of Eucalyptus urophyllax × E. grandis	15
Evaluation of thermal degradation behavior and fire resistance performance of wood-plastic composites containing different modified clay nanoparticles	15
Traditional wooden foundation piles in Amsterdam and Venice: techniques for the assessment of their state of conservation	15
Methodology evaluation of computer vision small-dimension hole localization	14
Water uptake and permeability in sapwood and heartwood of hydro-thermally proceed Turkey oak	12
A hybrid optimization approach integrating genetic algorithm and Monte Carlo tree search for multi-machine scheduling in manufacturing irregular solid wood furniture parts	12
The reflection behavior of longitudinal waves of acoustic emission and its application in wave velocity calculation	12
Wood-fiber insulation boards (WFIB) produced with hardwood and softwoods species and polylactic acid (PLA) fibers as a binder	12
The European Yield Model (EYM) for laterally loaded timber connections with smooth nails	12
Review of the effects of incising on treatability and strength of wood	12
A blue thermochromic pinewood that can change from dark blue to light blue at 38–48°C	12
Basic evaluation and restoration process for the structural characteristics of historically significant timber bridges in Türkiye: case studies in Eastern Black Sea Region	12
Differences of technological properties on sapwood and heartwood of short rotation teak wood	11
PHYSICO-MECHANICAL AND ANATOMICAL PROPERTIES OF NORMAL AND TENSION WOODS OF TERMINALIA SUPERBA (Engl. & Diels)	11
Investigation of mycelium film as the adhesive for poplar veneer bonding: insight into interfacial bonding mechanisms	11
On the numerical assessment of bending- and torsion-induced stresses in idealised sawn timber beams	11
Laminated bamboo lumber in compression perpendicular to the grain direction: Experimental investigation and the finite element analysis	11

A laboratory setup for measuring the wood-surface temperature during drying by means of thermography	11
Current state and development trend of China's customized home furnishing industry	11
The use of large-scale X-ray computed tomography for the evaluation of damaged structural elements from an old timber bridge	11
Chromatic aberration and decay resistance performance of bamboo and bamboo scrimber decayed by white-rot and brown-rot fungi	11
Embedment strength of fully threaded bolts in cross-laminated timber	11
Indoor functional plywood with electrothermal response, flame retardancy, and moisture-proof performance and enhanced surface temperature with nano-SiO 2 film	11
Mechanical behaviour of poplar laminated veneer lumber with fiber reinforced polymer under shear and compression stresses	11
Stress distribution and microstructural response of radiata pine under high-intensity microwave (HIMW) treatment	10
Engineered wood flooring made of residual forest biomass with incorporated aluminum oxide microparticles	10
Impregnation of Norway spruce with low melting-point binary fatty acid as a phase-change material	10
Protection of wood in ancient timber construction by surface painting of waterborne siloxane-modified polyurethane against water destroy	10
A novel method and validation for obtaining the optimal interference fit of round-end mortise-and-tenon joint	10
A chemistry-based explainable machine learning model based on NIR spectra for predicting wood properties and understanding wavelength selection	10
Sawn-timber quality of six half-sib families of hinoki cypress (Chamaecyparis obtusa (Siebold et Zucc.) Endl.)	10
Rapid estimation of wood density and total extractives of two important Dalbergia species using near-infrared (NIR) spectroscopy and multivariate analysis	10
Durability and mechanical performance of copper azole-treated cross-laminated timber (CLT) in-ground-contact exposure for 6 months	10
Biological durability of pine wood	9
The effect of combined use of plybamboo sheathings and self-tapping screws in enhancing wood-frame shear wall performance	9
Effects of compressed layer(s) position and thickness on the physico-mechanical properties of sandwich-compressed Chinese fir ( Cunninghamia lanceolata )	9
Bayesian logistic regression: An application for carbonisation damage in four wood species	9
Design strengths of bamboo based on reliability analysis	9
Flexural strength characterisation of oblique radiata pine splice joints	9
Use of lower tolerance limits for designing chair frames with round-end mortise and tenon joints	9
Shear behavior of metal plate joints of laminated bamboo lumber at different angles or sizes	9
Kinetics and thermodynamics of beech wood pyrolysis mechanism	9
Phase change materials to improve the energy savings of wood building envelopes in Quebec	9
Effect of thermo-vacuum modification on selected chemical, physical, and mechanical properties of Siberian larch ( Larix sibirica L.) wood	9
The effect of temperature and moisture content on drilling resistance measurements in wood ( Pinus sylvestris L.)	9
Evaluation of pit dimensions and uptake of preservative solutions in wood after permeability improvement by bioincising	9
Mold fungi development during the short-term wood-chips storage depending on the storage method	8
Status of China’s wooden-door industry and challenges lying ahead	8
The removal of iron from waterlogged archaeological wood: efficacy and effects on the room temperature wood properties	8
Shear performance of a novel non-metallic cross-laminated timber wall-to-wall connection using double-dovetail mortise-tenon joint	8
Natural and thermally modified paulownia wood from northern Italy plantations: sawing yield, sawn-timber quality, properties and durability	8
Effect of the nano-titanium dioxide (nano-TiO2) coating on the photoaging properties of thermally treated bamboo	8
Impregnation of wood with a paraffinic phase change material for increasing heat capacity	8
Strength and stiffness of 3D-printed connectors compared with the wooden mortise and tenon joints for chairs	8
Creep behaviour of densified European beech and Scots pine under constant climate	8
Correction	8
Influence of steel wires on the seismic performance of prestressed glulam beam-column bolted connections	8
Analyzing the chemical environment of bent bamboo ( Phyllostachys iridescens ) sections using XRD, XPS, and FTIR analysis	7
Modular multi-storey construction with cross-laminated timber: Life cycle environmental implications	7
Mode I cohesive law of birch wood-biobased adhesive systems	7
Mechanical response of metal-plate-connected tension joints using laminated bamboo lumber under cyclic loading	7
Effect of plasma modification on UV-curable ink-jet coating on medium-density fiberboard (MDF)	7
A comprehensive review on azoles based organic wood preservatives and their future prospects	7
Effect of oxidizing thermal modification on the chemical properties and thermal conductivity of Norway spruce (Picea abiesL.) wood	7
Experimental study on bond performance of the single glued-in rod in inorganic-bonded bamboo composite parallel to the grain	7
Characterization and grouping of various tropical kinds of wood species by density and colourimetric parameters	7
Moisture performance of various wooden shingles designs tested on the Golobar cable yarding	7

Temperature-sensitive microcapsules modification treatment to reduce formaldehyde emission from wood-based panels	7
A comparative study on the performance of terahertz, near-infrared, and hyperspectral spectroscopy for wood identification	7
Editorial	7
Kiln-drying effectiveness as influenced by moisture content and density variation within a Scots pine timber batch	7
Creep performance and analysis of glass fiber reinforced glulam beams under the influence of climatic conditions	7
Material model of medium-density fibreboard for simulations of static and dynamic mechanical response	6
Mode-displacement method for structural dynamic analysis of bio-inspired structures: A palm-tree stem subject to wind effects	6
Study on the flexural load bearing performance of nail-laminated I-beams	6
Surface carbonization of wood: comparison of the biological performance of Pinus taeda and Eucalyptus bosistoana woods modified by contact	6
Lead ion adsorption by biochar manufactured from downed timber: the effect of downed timber maturity and environmental exposure period	6
Service properties of pine after combining an impregnation treatment with a thermo-hydro modification process	6
Impact of prospective residents’ dwelling requirements on preferences for house construction materials	6
Phenol-formaldehyde-resin treatment of Scots pine sapwood for the reduction of resin exudation through coatings	6
Calibration and comparison of two moisture content measurement methods for in situ monitoring of beech laminated veneer lumber	6
Wood-waste classification using interpretable machine learning	6
Preparation of hydrophobic coating by phytic acid-based hybrid complexes to enhance the surface property of wood	6
Bamboo scrimber production: optimization of post-impregnation drying process using a heat pump dryer	6
Shear performance of single-layer unidirectional strand board (USB): modified testing methods	6
Flexural behavior and load-bearing capacity calculation methodology for wooden beams strengthened using aluminum plates attached with self-tapping screws	6
Moisture dependent bending mechanical properties of Chinese fir	6
Wood chatoyance within different species	6
Reduction of the corrosion potential of wood for application in the museum environment	6
Extract yields of two commercially valuable wood species in Central Africa: Bilinga and Tali, their nature and role in water sorption activities	6
An approach for computing the specific heat capacities of logs stored for a long time in an open warehouse	6
Biological durability and moisture dynamics of Dawn redwood (Metasequoia glyptostroboides) and Port Orford cedar (Chamaecyparis lawsoniana)	6
Simulation analysis and experimental research of friction performance between wood and cemented carbide surface with different micro-textures	6
Hygroscopic buffering effects in exposed cross-laminated timber surfaces and indoor climate in a Norwegian primary school	6
Experimental investigations on the bearing properties of bamboo scrimber joints by a bolted bamboo-steel-bamboo connection	6
Triaxial variation of the modulus of elasticity in the thermo-elastic range of six tropical wood species	6
An accurate object detection of wood defects using an improved Faster R-CNN model	6
Frictional behaviour of wood-Plastic composites against cemented carbide during sliding contact	6
Links between the quality of Douglas fir sawn timber and selected tree and site characteristics in Germany	6
A study of the accuracy of industrial robots and laser-tracking for timber machining across the workspace	5
Lateral stiffening systems for tall timber buildings – tube-in-tube systems	5
Development of plywood bonded with a novel adhesive film made from polystyrene foam waste dissolved in D-limonene	5
Influence of weathering on mechanical properties of culm samples of Guadua angustifolia Kunth bamboo with and without nodes	5
Influence of grain orientation on the light behaviour of transparent wood	5
Impact of COVID-19 on wood-based products industry: An exploratory study in Slovenia, Croatia, Serbia, and BiH	5
Cutting forces and noise in helical planing black spruce wood as affected by the helix angle and feed per knife	5
Water vapour transmission properties of uncoated and coated wood-based panels	5
Effects of log temperature, moisture content, and cutting width on energy requirements for processing logs by a chipper–canter	5
Treatment of wood by sulfate and hydroxyl radical oxidation produced from thermally-activated persulfate: VOC emission and wood property evaluation	5
Dimension-reduced mathematical modeling of self-shaping wooden composite bilayers	5
The effect of veneer-surface modification with fumed nanosilica on the selected properties of water-resistant plywood	5
Effect of the particle geometry on lightweight particleboard from Paulownia using high-frequency pressing technology	5
Natural resistance of coppiced and non-coppiced rosewood ( Pterocarpus erinaceus Poir.) under outdoor field exposure to termites	5
Damage localization and comfort study of glulam arch bridge inspired by Chinese braided timber arch bridges	5
Competition patterns and biodegradation results of multiple fungal species on Moso bamboo ( Phyllostachys edulis )	5
Performance study on mounting system for displacement transducer in mechanical tests of timber samples using photogrammetry method	5
Prediction of surface roughness at the machining of densified wood surfaces	5
Mechanical performance of a particleboard based on natural hardener	5
Statistical and machine-learning models to predict the flexural properties of wood-based composites fabricated via material extrusion technique	5
Multi-scale structural deterioration analysis of archaeological wood from the Shahe Ancient Bridge site in Xi’an, Shaanxi, China	5
Modification of nanoclay with different methods and its application in urea-formaldehyde bonded plywood panels	5
Considerations on variability in acoustic measurements in timber property assessment	5
Delignified wood biocomposites as sustainable and transparent materials for passive cooling applications	5
Enhancing poplar-wood properties through nano-silica fortified polyvinyl-acetate impregnation	5
Mode I fracture of beech-adhesive bondline at three different temperatures	5
Moisture content-mechanical property relationships for two okan ( Cylicodiscus gabunensis ) substitutes	5
One-Component polyurethane adhesive filled with milled carbon fibre and its effect on hydrothermal stability of beech-glued joints	5
Preparation of bisDOPO-NH2-POSS flame retardant and its application to plywood using modified urea-formaldehyde resin	5
Mode I cracking of three tropical species from Cameroon: the case of bilinga, dabema, and padouk wood	4
Resin distribution and mechanical properties of furfurylated Chinese fir wood in relation to furfuryl alcohol concentration	4
The effect of growth-ring orientation on the compressive performance of Douglas fir	4
A novel dataset for the bamboo compressive strength analysis	4
Enhancing tool life through innovative process control in wood-based machining	4
Material properties of particleboards produced from Ciol®-treated wood shavings	4
Mechanical performance of poplar laminated veneer lumber truss joints	4
Preparation and investigation of an eco-friendly plywood adhesive composed of sucrose and ammonium polyphosphate	4
Selection of wooden furniture joints with multi-criteria decision-making techniques	4
Analysis of surface roughness of chemically impregnated Scots pine processed using frame-sawing machine	4
'Marfim pattern’ of wood species in the Southern Brazilian timber market: colorimetry and visible spectra	4
Production and design-value assessment of number one grade three-timber oak access mats	4
Wide band dielectric permittivity prediction based on density of softwood specimens: forgetting microwave measurement	4
Mode I fracture properties of thermally-modified spruce wood ( Picea abies ) at different moisture contents	4
Preservative retention and penetration in Norway spruce wood as influenced by different microwave treatment energy levels	4
The flexural performance of vertical steel-plate-reinforced bamboo scrimber beams	4
Comparing modelling performance of chemometric methods for wood discrimination by near infrared spectroscopy	4
Effect of tip path overlap on ring debarker performance of frozen and unfrozen black spruce logs	4
Effect of wood adhesive modification with liquefied lignocellulosic biomass and nanocellulose on the formaldehyde and volatile organic compounds emissions of particleboards	4

Optimization of wear behavior of additively manufactured green biocomposites from printed polylactic acid (PLA) and microcrystalline cellulose	4
The mechanical performance evaluation of recombinant bamboo with weakened metal connections under low-cyclic loading	4
Identification of optimal cutting parameters regarding lacquer wettability of CNC processed MDF panels by artificial neural network	4
A comprehensive review of metallic wood fabricated via alloy impregnation	4
A triangular acoustic emission source location method considering its anisotropic propagation behavior on the surface of finger-joint-laminated board	4
Residential long-span timber floor typologies: a comprehensive performance assessment and opportunities for value adding to plantation hardwood	4
Generation and compression testing of spherical wood bodies	4
Hydrothermal treatment-induced changes in wood iron concentrations and colour: a technological study	4
Adding value to hardwoods – thin hardwood cross-laminated timber (HCLT)	3
Properties of particleboards made from mixture of oversized fibers from MDF waste process and wood particles of Norway spruce ( Picea abies )	3
Leach-resistant fire-retardant treated furfurylated wood by incorporating guanyl-urea phosphate	3
Embedment strength and foundation modulus at an angle to the grain for fully threaded bolts	3
Radial variation and prediction model in crystallinity and microfibril angle of Michelia macclurei	3
Longitudinal compression constitutive model of original bamboo and buckling simulation of bamboo column	3
Cross-laminated timber: Perspectives from a bibliometric analysis (2006–2018)	3
Bond-line strength, chemical properties and cellulose crystallinity of welded pine and itauba wood	3
Long-term creep behavior of glulam member under compression and bending moment	3
Experimental study and numerical simulation of the nailing process as a full sliding frictional contact problem using a displacement-driven approach	3
Modified third order shear-deformation model for anisotropic glulam beams via three-field mixed finite-element formulation	3
Bending and compressive properties of glued-laminated timber composed of Japanese white birch wood using casein adhesive	3
Innovation ecosystems beyond construction projects – a case study of Swedish cross laminated timber building networks	3
Effects of alkyl-ketene dimer on physical, mechanical and formaldehyde emission properties of particleboard produced with melamine-impregnated paper waste	3
Interpretative analyses for milling surface roughness prediction in thermally modified timber: Shapley value (SHAP) and local interpretable model-agnostic explanations (LIME)	3
The use of ring-porous East Asian ash (Fraxinus japonica (Thunb.) Steud.) and oak (Quercus spp.) cross-sections as eco-friendly resonance-absorbing materials for building	3
Forum Wood Building Nordic 2021	3
Effects of accelerated aging on compressive response of natural and synthetic core materials: freeze-thaw cycles and UV radiation	3
Hydrogen and covalent bonding synergistically reinforced wood-based composites inspired by nacre	3
Recent advances of nanotechnology in wood protection: a comprehensive review	3
The sawmill yield increase potential with manufacturing increased wane and random width boards for engineered wood products	3
Assessment of the chipping process of beech ( Fagus sylvatica L.) wood: knives wear, chemical and microscopic analysis of wood	3
Kraft lignin-glyoxal, phase-change material modified wood for enhancing thermal-energy storage capability	3
Study on the wettability of microsphere-containing emulsion on different wood surfaces	3
Effect of hot-pressing and hydrothermal parameters on recycled wood particles and particleboards	3
Experimental characterization of density, defects and drying kinetic of three amazonian wood species:Astronium lecointei,Dinizia excelsa,andHymenolobium heterocarpum	3
Chemical characteristics and viscoelastic properties of Nothofagus alpina thinning wood thermally modified using a dynamic mechanical analysis (DMA)	3
Comparison of the time-moisture and time-temperature equivalences in the creep properties of Chinese fir	3
Characterization of water states and pore size distribution in Beijing poplar using nuclear magnetic resonance techniques	3
Study on the subjective brightness of photonic crystal structural colored wood products	3
Effects of heat treatment temperatures on the photostability of Moso bamboo during accelerated UV weathering	3
Influence of the heating rate on the thermodegradation during the mild pyrolysis of the wood	3
The assessment of fire risk rating of wood specimens coated with metal oxides in different oxidation states in case of fire (I)	3
Effect of resin content on the water-resistant, mechanical, and thermal properties of scrimber made from radiata pine wood ( Pinus radiata D. Don )	3
UV-irradiation reduces the mechanical performance of wood-adhesive interphase	3
Slip modulus of inclined screw connectors in glued laminated bamboo and wood-concrete composite beams	3
A comprehensive assessment on surface quality of machined wooden products via Box-Behnken design method	3
Wood-based furniture industry in Manipur, India: structure, employment intensity, technology and value chain	3
Preparation and properties of soybean protein adhesive modified by chitosan/tannic-silver nanocomposite	3
Wood treatment using in situ polymerization of pine resin and styrene	3
Biological durability of particleboard: fungicidal properties of Ag and Cu nanoparticles against Trametes versicolor white-rot fungus	3
Moisture and short-term time-dependent behavior of Norway spruce clear wood under compression perpendicular to the grain and rolling shear	3
Transparent, UV blocking, and strong wood-based biocomposites with isotropic optical and mechanical properties	3
Study on the dyeing properties of Chinese fir with Cinnamomum camphor pigment by premordant dyeing	3
Size effect on the compressive properties of neosinocalamus affinis-based bamboo scrimber	3
Knowledge of wood sector stakeholders about wood pests in the cities of Yaoundé and Douala (Cameroon): species marketed, management difficulties and importance of termites	3
Environmental and ontogeny effects in wood fiber properties of Pterocarpus ericaneus (Poir.)	3
Cutting speed and feed-per-knife effects on surface quality of cants produced by a chipper-canter	3
Rolling shear properties of cross-laminated timber made of fibre-managed plantation eucalyptus under short-span bending	3
Influence of micron-sized oligomeric semisiloxane modification on surface properties of veneer and interfacial adhesion of EVA film/poplar plywood	3
Experimental study of partially encased bamboo scrimber columns under axial compression	3
A novel application of waste poplar sawdust biochar: preparation of a shape-stable composite phase-change material with excellent thermal energy-storage performance	3
Effect of construction features on the dynamic performance of mid-rise CLT platform-type buildings	3
Modified iron-bearing material from oak tree as a green environmental-friendly catalyst for the treatment of dye effluents	3
Flow, curing and mechanical properties of thermoset resins – wood-fiber blends for potential additive-manufacturing applications	3
Elasto-mechanical properties of thermo-hygro-mechanical (THM) densified oil palm sawn timber	2
Predicting the mechanical properties of timber from existing structures by the longitudinal vibration method, visual grading and definition of the nominal cross-section	2
Acidic deep eutectic solvent as a novel catalyst for urea–formaldehyde resin curing	2
Softwood branches modelled as a composite beam of compression and opposite wood: investigation of bending resistance	2
Influence of thermal modification and sanding parameters on finest particle content in pinewood dust	2
Enhanced thermal properties and dimensional stability of wood treated with phase-change materials for building energy storage applications	2
Research on the preparation process and performance of translucent bamboo materials utilizing whole bamboo with low energy consumption	2
Dynamic tests on a long-span, stressed-skin, timber floor	2
Investigation on mechanical and thermal properties related to hygroscopicity of two African hardwoods	2
Decay resistance of wood treated with copper oxide nanoparticles synthesised using leaf extracts of Lantana camara L. and Nerium oleander L.	2
Low formaldehyde-emission particleboards with the addition of Scots pine wood waste derived activated carbon	2
An experimental study on efficient physical wood modification for enhanced permeability – focusing on ultrasonic and microwave treatments	2
Effect of unilateral surface-densification process on wood-surface coating properties	2
Study on free shrinkage and rheological characteristics of Eucalyptus urophylla ×E. grandis during conventional drying	2
Chemical migration and redistribution of chromated copper arsenate (CCA) components in Eucalyptus nitens heartwood under accelerated weathering	2
Comparative study on the bending moment capacity and stiffness of innovative and traditional furniture corner joints	2
Analyzing the bulk flow through porosity of Dalbergia ruddae wood by coupling 3D image analysis and numerical simulations	2
Environmentally friendly protection of European beech against fire and fungal decay using a combination of thermal modification and mineralisation	2
Public perception of fire safety and risk of timber buildings	2
Enhancing the water resistance and dimensional stability of wood through microwave treatment and impregnation with oxidised paraffin emulsion	2
Determination of the machining characteristics of Uludağ fir (Abies nordmannianaMattf.) densified by compressing	2
Residual strength and time to failure of bonded wooden lap joints at high temperatures and superimposed constant loading	2
Investigation of various hardwood and softwood fibres for the usage in wood-fibre insulation panels	2
Determination of wood characteristics of Pinus brutia Ten. infested with Marchalina hellenica Genn.	2
Circulation of structural timber for structural purposes: a review of opportunities and challenges	2
Sorption isotherms and moisture transfer properties of seven Central Africa hardwood species	2
Physical and mechanical characteristics of poplar treated with phosphoric acid under low-temperature thermal modification	2
Cutting force analysis of oak for the development of a cutting force model	2
Effects of flexural configuration and thermal modification on the physical and flexural properties of makino bamboo ( Phyllostachys makinoi )	2
Performance optimization of cutting devices for Caragana Korshinskii Kom.: a multiscale analysis of sliding cutting angles	2
Push-out resistance of threaded wooden dowels in cross-laminated timber with hardwood cross-layer	2
Resistance of bamboo scrimber modified with furfuryl alcohol against decay fungi and termites	2