International Journal of Oil Gas and Coal Technology

Papers
(The TQCC of International Journal of Oil Gas and Coal Technology is 0. The table below lists those papers that are above that threshold based on CrossRef citation counts [max. 250 papers]. The publications cover those that have been published in the past four years, i.e., from 2022-05-01 to 2026-05-01.)
ArticleCitations
Synthesis and viscosity reduction performance evaluation of oil-soluble viscosity reducer based on molecular dynamics simulation18
The maximum installation depth for a pre-drilled liner with floating inner tubing in horizontal well in tectonically deformed coal seams14
Metal naphthenate precipitation modelling framework10
Characterisation of surface and structural properties of Permian coals from Sohagpur Coalfield, India: a comprehensive analysis7
Simulation and optimisation for DMR natural gas liquefaction unit7
Effect of adding fusel oil with gasoline on performance, combustion, and emission characteristics of gasoline injection engine7
Research status and trend of coal and gas outburst: a literature review based on VOSviewer6
Feasible fuel (petrol/diesel) price monitoring technology in India without affecting government profit6
Study on deformation and seepage characteristics of water-filled coal rocks under different mining methods5
Geomechanical model of Ratawi shale reservoir5
Fractal characteristics analysis of pore structure in tight sandstone reservoirs of the He 8 member, Shihezi formation: eastern Ordos Basin5
Optimisation of biodiesel production from <i>Chlorella protothecoides</i> microalgal oil using combined ANN-GA software5
Development and application status of internal floating roof used for petrochemical storage tank5
Investigations of coal permeability under the influence of stress, matrix-fracture adsorption induced strain and volumetric strain5
Production model of fractured horizontal wells in shale gas reservoirs considering different gas diffusion mode4
Multi-product and multi-period maritime oil logistics model with a cooperative approach among hubs4
Assessing the impact of blends of olea europaea oil methyl esters and diesel bio-diesel on CI engine performance and emission characteristics: a comparative study4
Analysis of sulphur deposition and well production in sour gas reservoirs considering the effect of temperature field4
Biodiesel production from third-generation feedstock: process parameter modelling and optimisation using RSM-ANN approach3
Deformation characteristics and structural evolution mechanism of bituminous coal under thermo-hydro-mechanical-chemical coupling3
A prediction of China's dependence on foreign oil up to 20603
Investigation of volcanic rock quantitative fracture evaluation and reservoir classification based on the logging method - an example from Nanpu Sag3
Beyond conventional approach: hybrid supervised learning and feature selection algorithms for prediction sonic logs - a study in a tight gas sand, North of Oman3
Distribution of alternating injection fluid in rough fractures3
A new methodology for optimising production in an integrated model using a genetic algorithm3
A new method for predicting the failure pressure of locally corroded oil and gas pipelines3
Advanced exergy analysis of the modified process of natural gas cryogenic helium extraction3
Investigation of gas adsorption and desorption characteristics for some Turkish lignites in terms of coal petrographic properties3
Temperature and pressure calculation model of the wellbore annulus in the formation with narrow safe drilling fluid density window during gas kick process2
Influence of small organic molecules on methane adsorption on coal: a molecular simulation study2
Influence of geological factors on gas content of the deep coal seam in the northern DJ block, Southeast Ordos Basin, China2
Experimental study and application of rock electrical properties under high temperature and high pressure based on Archie's formula: a case study of Jimsar shale oil reservoir in Xinjiang, China2
Natural gas demand forecasting based on a subdivided forecasting model and rule-based calibration2
Metal naphthenate precipitation modelling framework2
Investigations of coal permeability under the influence of stress, matrix-fracture adsorption induced strain and volumetric strain2
The role of stirring type in the formation of uniform structures of ZSM-5 - gamma alumina enriched with Si2
Machine learning-based prediction strategy for sustainable diesel engine operation using a tri-fuel blend2
Multi-scale pore structure and methane adsorption of deep lower Jurassic coals from the Badaowan formation in the Junggar Basin2
Fast marching method for evaluation of reserves drainage volume in shale gas reservoirs considering multi-well interference2
Evaluation of the concentration and health risk of heavy metals and aromatic compounds in the deposits of the coastal strip of the Persian Gulf, Southwest Iran2
Biodiesel production from third-generation feedstock: process parameter modelling and optimisation using RSM-ANN approach2
Sensitivity and critical values of prediction indexes of gas outburst of composite coal seams based on energy theory2
Modern steel production using biomass energy in 21st century: blessing or curse2
Screening and performance evaluation of epoxy resin long-term sustained-release solid tracer2
A comprehensive review on biodiesel performance: advantages, challenges, policies and prospects2
Deformation characteristics and structural evolution mechanism of bituminous coal under thermo-hydro-mechanical-chemical coupling2
Study of rock drillability evaluation based on drilling parameters of cutting rig2
Optimising chemical concentration and injection volume in the ASP process: a combined approach incorporating experiments and the optimal experimental design2
Study of in-cylinder mixing performance of gas-fuel engine under PFI-DI hybrid injection condition2
Experimental investigation and performance improvement of a new combined T-junctions gas-liquid separator2
An experimental investigation on preparation and performances of two diesel blends of karanj oil methyl ester1
Experimental study on the adsorption and desorption behaviours of methane in clay minerals1
Lithofacies identification and prediction of Chang 7<SUB align="right">3 shale oil reservoirs in Ordos Basin: insights from the multi-resolution graph-based clustering analysis1
Feasible fuel (petrol/diesel) price monitoring technology in India without affecting government profit1
Experimental study on heat transfer in heavy oil reservoirs during in-situ combustion1
Transforming waste cooking oil into environmentally friendly biodiesel: a comparative analysis of three transesterification methods1
Development of coal quality exploration technique based on convolutional neural network and hyperspectral imaging1
Numerical simulation of the reservoir and operational parameters to optimise steam flooding performance1
Prediction of shale gas horizontal well production using particle swarm optimisation-based BP neural network1
Phase behaviour analysis of condensate gas reservoirs in Dabei oil and gas area: impact of variable wax content on dew point pressure, flash separation, and condensate recovery1
Thermal-hydraulic-mechanical coupling effects on CBM extraction from heat-injected coal seams in basis of numerical simulation and experimental study1
Experimental investigation for partially premixed compression ignition in a diesel engine using n-butanol, biodiesel and diethyl ether blends1
Experimental study on heat transfer in heavy oil reservoirs during in-situ combustion1
Modern steel production using biomass energy in 21st century: blessing or curse1
Seepage-induced sedimentary structures and their significance in beach bars of the Zhoushan Archipelago, China1
Coal permeability evolution and gas production performance prediction under the coupling action of stress-residual water-pulverised coal1
Characterisation of surface and structural properties of Permian coals from Sohagpur Coalfield, India: a comprehensive analysis1
Technical system and mining pressure law of full mining and local filling in a deep mine1
Study on gas-water-sand-hydrate foam flow and discharge in the wellbore during hydrate depressurisation production1
Evolutionary algorithms for integrated oil and gas supply chain management considering enhanced oil recovery methods1
Analysis of the effect of different pretreatment conditions on pore structure heterogeneity of low-rank coal based on multifractal theory1
Effect of a vortex plate on turbulent flow within an axial hydrocyclone for preliminary water separation1
Study on deformation and seepage characteristics of water-filled coal rocks under different mining methods1
Numerical simulation study on evolution characteristics and difference of CO2 injection pressure transfer between multi-branch pinnate borehole and single borehole1
A study on the transient permeability behaviour of coal core under confinement1
Development and evaluation of fracture gradient curve model: a case study of south-central Kazakhstan1
A novel approach to designing wire mesh demisters for surface separators: experimental, CFD, and artificial intelligence perspectives1
Lithofacies identification and prediction of Chang 7<SUB align="right">3 shale oil reservoirs in Ordos Basin: insights from the multi-resolution graph-based clustering analysis1
Investigating the impact of oil shales spread on the contamination level of fluvial sediments (case study: Qalikuh area of Lorestan, southwest of Iran)1
Performance forecast for two vertical fractured wells in laterally heterogeneous gas reservoirs by boundary element method1
Rock physical and mechanical properties test and comprehensive evaluation of the Longtan group in Well DH Can 1, Dahebian block, Guizhou Province1
Contemporaneous and lagged transmission mechanism among geopolitical risks, uncertainty and energy prices: a spatial heterogeneity perspective1
Risk assessment of ammonium salt crystallisation in wax oil hydrogenation cooling exchange equipment1
Automatic horizon tracking method based on knowledge self-distillation1
Forecasting future demand for coal, oil and gas: application with related to smart cities1
Study on downloading contaminated product at an intermediate station in Lanzhou-Chengdu-Chongqing multi-product pipeline1
Dynamic response characteristics of multi-gas in coal seam during gas injection process1
Optimising mud management: adaptive moment estimation-based ANN for predicting rheological and filtration properties of KCl-PHPA-Polyol drilling fluids1
Mechanical characteristics and damage evaluation of coal subjected to aerodynamic cavitation: an experimental study1
After-sales indicators in the liquefied petroleum gas industry: a hybrid multi-criteria decision-making approach in an uncertain environment0
Simulation study on frictional resistance and influencing factors of flexible screen pipe tripping into horizontal wellbore0
Optimisation of biodiesel production from Chlorella protothecoides microalgal oil using combined ANN-GA software0
Prospects for application of synchrotron SAXS-WAXS in coal based activated carbon research0
Hydraulic fracturing technology of key gangue inclusion in thick coal seam and its application0
Developing a novel correlation for the design of vane-type demisters in two-phase separators0
Distribution of alternating injection fluid in rough fractures0
Investigating a machine learning algorithm's applicability for simulating the apparent viscosity of waxy crude oil in a pipeline0
Analysis of sulphur deposition and well production in sour gas reservoirs considering the effect of temperature field0
Research status and trend of coal and gas outburst: a literature review based on VOSviewer0
Phase behaviour analysis of condensate gas reservoirs in Dabei oil and gas area: impact of variable wax content on dew point pressure, flash separation, and condensate recovery0
Experimental study on prediction of gas pressure variation during coal and gas outburst0
Performance of an anti-scaling alkali-surfactant-polymer flooding system for heavy oil0
Dynamic permeability model based on Klinkenberg effect: numerical simulation on CBM migration around boreholes and methane extraction practice0
Experiments and numerical investigation on rock-breaking enhancement mechanism of supercritical CO<SUB align="right">2 jet drilling0
Performance and emission analysis of a homogeneous charge compression ignition engine fuelled with compressed natural gas0
Drilling efficiency enhancement in oil and gas domain using machine learning0
Estimating coal consumption in Turkey using machine learning methods0
Testing and comparative analysis of dynamic and quasi-static compressive and tensile properties of hard coal0
A comprehensive review on the high-density clear completion fluids for applications in HPHT well completion0
Research on the sucker rod automation of minor workover operations based on process reconfiguration0
Future of WSNs and IoT technology in the oil and gas industry, through MEMS energy harvesters0
Transforming waste cooking oil into environmentally friendly biodiesel: a comparative analysis of three transesterification methods0
Production model of fractured horizontal wells in shale gas reservoirs considering different gas diffusion mode0
Experimental study on the adsorption and desorption behaviours of methane in clay minerals0
Different treatment techniques of oilfield produced water - a review0
Simulation and optimisation of 1.2MT/A FCCU absorption-stabilisation system0
Experimental investigation of rotating self-propelled cavitation jet for efficient mineral scale removal in oil field tubes0
Predicting well cement integrity using open-hole logging and borehole survey data: a novel machine learning approach0
Study on the thermal control properties of inorganic hydrate salts doped coal mine polyurethane sealant0
Screening and performance evaluation of epoxy resin long-term sustained-release solid tracer0
Intensified transesterification of algae oil using ultrasonic cavitation0
Effect of cyclic loading phenomenon on the crush resistance of different proppants: an experimental investigation0
Leak detection in petroleum pipelines using fuzzy logic and statistical simulation methods0
Catalytic depolymerisation of Yinggemajianfeng lignite via ionic liquid pretreatment-catalytic ethanolysis tandem system0
Modelling the impact of energy production on environmental quality of resource-rich countries0
Optimised design and evaluation of cement slurry for HPHT well integrity in Basin X0
Temperature and pressure calculation model of the wellbore annulus in the formation with narrow safe drilling fluid density window during gas kick process0
Research on reservoir quality characterisation methods for tight sandstone reservoirs - a case study of the Southern Ordos Basin0
Rock-breaking characteristics and impact resistance mechanism of ridged PDC cutters0
Experiments and numerical investigation on rock-breaking enhancement mechanism of supercritical CO<SUB align="right">2 jet drilling0
Leak detection in petroleum pipelines using fuzzy logic and statistical simulation methods0
Comparative analysis of energy consumption and carbon emission in the boil-off gas recondensation process0
Simulation and analysis of natural ice-making based on gravity heat pipes0
Study on flow-induced variations in permeability characteristics of silty clay sediments from the perspective of fine migration and channelisation0
Geopolitical dynamics and the sustainable future of global energy supply chains0
Effect of a vortex plate on turbulent flow within an axial hydrocyclone for preliminary water separation0
Coal permeability evolution and gas production performance prediction under the coupling action of stress-residual water-pulverised coal0
Multi-response optimisation of waste cooking oil transesterification for improved biodiesel yield and quality using RSM0
Prediction of shale gas horizontal well production using particle swarm optimisation-based BP neural network0
Research on mine pressure law of isolated working face in close-distance thin coal seam under the influence of remaining coal pillar0
Advanced calculation method for rheological characterisation of non-Newtonian drilling fluids using Herschel-Bulkley model0
Global oil market: an outlook to 2030. How will the balance of supply and demand change over the next 10 years0
Early detection of overflow based on genetic algorithm for capturing multiple feature changes in managed pressure drilling0
Predicting world electricity generation by sources using different machine learning algorithms0
Development and application status of internal floating roof used for petrochemical storage tank0
A review of all aspects of dry coal cleaning methods and evaluation of widely used applications0
Evaluation of the concentration and health risk of heavy metals and aromatic compounds in the deposits of the coastal strip of the Persian Gulf, Southwest Iran0
Geomechanical model of Ratawi shale reservoir0
Comparative analysis of energy consumption and carbon emission in the boil-off gas recondensation process0
Investigation of gas adsorption and desorption characteristics for some Turkish lignites in terms of coal petrographic properties0
Effect of adding fusel oil with gasoline on performance, combustion and emission characteristics of gasoline injection engine0
Hydraulic fracturing technology of key gangue inclusion in thick coal seam and its application0
Application of 1D CNN-BiGRU hybrid neural network to identify reservoir rock types in sandstone reservoir0
Fractal characterisation of pore structure of Longmaxi Formation shale in northern Guizhou using NMR0
Study on the thermal control properties of inorganic hydrate salts doped coal mine polyurethane sealant0
Design and experimental investigation of a natural gas burner for pellet rotary kilns0
Data-driven analysis and predictive modelling of PDC and tricone bit performance in field drilling operations0
Multi-product and multi-period maritime oil logistics model with a cooperative approach among hubs0
Bias mitigation and model selection in stochastic decline curve analysis0
Fatigue failure analysis based on coupling vibration of drill string in ultra-deep wells0
Wellbore stability charts for shale and carbonate formations during drilling operations with field applications0
Route selection for mine haulage road considering dynamic topographic changes and fuel consumption0
Automatic horizon tracking method based on knowledge self-distillation0
Technical system and mining pressure law of full mining and local filling in a deep mine0
Emission analysis of esterified mahua oil fuelled with DTBP blends in conventional diesel engine0
Study of rock drillability evaluation based on drilling parameters of cutting rig0
Stochastic production scheduling for water-oil displacement by reduced-order models generated using liquid production rates0
Painting India's hydrogen green0
A new method for predicting the failure pressure of locally corroded oil and gas pipelines0
Optimisation of novel Salvia hispanica L. biodiesel using sodium methoxide base catalyst0
Testing and comparative analysis of dynamic and quasi-static compressive and tensile properties of hard coal0
A new methodology for optimising production in an integrated model using a genetic algorithm0
The formation mechanism of laumontite and its effect on reservoir quality in Upper Triassic Chang-63 tight oil sandstones, Ordos Basin0
Evolutionary algorithms for integrated oil and gas supply chain management considering enhanced oil recovery methods0
A proposed method for shale permeability tensor calculation considering shale anisotropy0
A proposed method for shale permeability tensor calculation considering shale anisotropy0
Evaluation of oil price volatility development0
Application of 1D CNN-BiGRU hybrid neural network to identify reservoir rock types in sandstone reservoir0
A new automatic differentiation approach for fully implicit compositional reservoir simulation0
Public perception of natural gas and climate change0
Performance forecast for two vertical fractured wells in laterally heterogeneous gas reservoirs by boundary element method0
Modelling of ash deposition formation on the surface of superheaters during combustion of Zhundong coal0
A novel approach to designing wire mesh demisters for surface separators: experimental, CFD, and artificial intelligence perspectives0
Pore characteristics and its impact factors of shale from the Upper Cambrian Niutitang formation in the Southern Shaanxi area, China0
The role of stirring type in the formation of uniform structures of ZSM-5 - gamma alumina enriched with Si0
Prediction and optimisation of electricity market clearing price in Turkey by using machine learning methods0
Simulation of SAGD for the greenfield development plan using AI-based parameter optimisations0
An experimental investigation on preparation and performances of two diesel blends of karanj oil methyl ester0
Evaluating the effect of petroleum price volatility on government revenue in Ghana0
Experimental investigation for partially premixed compression ignition in a diesel engine using n-butanol, biodiesel and diethyl ether blends0
Influence of natural fracture occurrence on hydraulic fracturing construction pressure0
Application of pigging track approach in gas-exhausting for gas-liquid two-phase flow in undulating pipelines0
Formation water geochemistry and the petroleum geological significance in Yanchang Formation of Wuqi Oilfield, Ordos Basin, China0
Route selection for mine haulage road considering dynamic topographic changes and fuel consumption0
Investigating the impact of oil shales spread on the contamination level of fluvial sediments (case study: Qalikuh area of Lorestan, southwest of Iran)0
Three-dimensional analysis for allowable breakout width in vertical well0
Review of the research progress on the application of blockchain technology in the oil and gas industry0
Study on the disturbance law of natural fracture on ground stress field0
Mechanical characteristics and damage evaluation of coal subjected to aerodynamic cavitation: an experimental study0
Leakage detection method of acoustic emission pipeline based on deep convolutional neural network transfer learning0
Comparative study on multi-cylinder DI diesel engine using hybrid fuel blends (diesel-biodiesel-ethanol derivative) as fuel0
Lithology identification technology based on the stacking fusion model0
Study of in-cylinder mixing performance of gas-fuel engine under PFI-DI hybrid injection condition0
After-sales indicators in the liquefied petroleum gas industry: a hybrid multi-criteria decision-making approach in an uncertain environment0
Fractal characterisation of pore structure of Longmaxi Formation shale in northern Guizhou using NMR0
Risk assessment of ammonium salt crystallisation in wax oil hydrogenation cooling exchange equipment0
Simulation of adsorption-desorption characteristics of clay minerals on heptadecane: coupled grand canonical Monte Carlo - molecular dynamics0
A comprehensive comparative study of flow regimes, volumetrics, and hydraulic fractures performance for MIP wells of MSEEL0
Jurassic hydrocarbon accumulation period division in Huanjiang oilfield: evidence from fluid inclusions0
Jurassic hydrocarbon accumulation period division in Huanjiang oilfield: evidence from fluid inclusions0
Rock physical and mechanical properties test and comprehensive evaluation of the Longtan group in Well DH Can 1, Dahebian block, Guizhou Province0
Optimising mud management: adaptive moment estimation-based ANN for predicting rheological and filtration properties of KCl-PHPA-Polyol drilling fluids0
Advanced calculation method for rheological characterisation of non-Newtonian drilling fluids using Herschel-Bulkley model0
Study on the self-priming law of heterogeneity in fractured tight reservoirs0
Future of WSNs and IoT technology in the oil and gas industry, through MEMS energy harvesters0
Detection methodologies on oil and gas kick: a systematic review0
Research on mine pressure law of isolated working face in close-distance thin coal seam under the influence of remaining coal pillar0
Numerical modelling of the process of thermal treatment of oil slime0
Investigation of volcanic rock quantitative fracture evaluation and reservoir classification based on the logging method - an example from Nanpu Sag0
Study on the self-healing law of cracks in borehole sealing materials based on mineralisation reaction0
Design and experimental investigation of a natural gas burner for pellet rotary kilns0
Development of a data-driven screening model for miscible carbon dioxide flooding0
Preparation and mechanism of viscosification for recyclable associating polymer with low damage for fracturing0
Thermo-hydro-mechanical-damage coupling mechanism and failure behaviour of caprock in SAGD operations0
Study on the law of disaster caused by multi-field coupling of coal and gas near fault tectonic zone0
Paleoenvironment and petroleum potential of the lacustrine shales in the Lower Cretaceous Shahezi Formation of the Southern Songliao Basin, NE China0
A study on the transient permeability behaviour of coal core under confinement0
Mechanical properties and acoustic-emission energy-frequency characteristics of gas-bearing coal under different stress paths0
Experimental study on prediction of gas pressure variation during coal and gas outburst0
Experimental investigation on the anisotropy of rock brittleness for reservoir evaluation based on digital drilling mechanical properties0
Condensation pattern of moist blast furnace gas in pipelines0
Fractal characteristics analysis of pore structure in tight sandstone reservoirs of the He 8 member, Shihezi formation: eastern Ordos Basin0
Wellbore stability charts for shale and carbonate formations during drilling operations with field applications0
Influence of small organic molecules on methane adsorption on coal: a molecular simulation study0
Numerical modelling of the process of thermal treatment of oil slime0
Effect of cyclic loading phenomenon on the crush resistance of different proppants: an experimental investigation0
Comprehensive evaluation of geology and engineering integration of XTT tight oil reservoir0
Simulation of SAGD for the greenfield development plan using AI-based parameter optimisations0
Sequential thermal dissolution and oxidative depolymerisation of Cheji coal0
Effects of methanol substitution rate on combustion and emission characteristics of methanol/diesel dual fuel engines0
Influence of geological factors on gas content of the deep coal seam in the northern DJ block, Southeast Ordos Basin, China0
Influence mechanism of mining speed on energy release in a mine roof and elastic coal system0
Rock-breaking characteristics and impact resistance mechanism of ridged PDC cutters0
Study on gas-water-sand-hydrate foam flow and discharge in the wellbore during hydrate depressurisation production0
A prediction of China's dependence on foreign oil up to 20600
Sequential thermal dissolution and oxidative depolymerisation of Cheji coal0
Thermal-hydraulic-mechanical coupling effects on CBM extraction from heat-injected coal seams in basis of numerical simulation and experimental study0
The simulation and experimental study of leakage noise sources in gas pipeline bends0
Simulation and optimisation for DMR natural gas liquefaction unit0
Experimental and numerical simulation of the deposition characteristics of NH<SUB align="right">4Cl particles in 90° elbow0
0.089086055755615