International Journal of Applied Mechanics

Article	Citations
Analysis of Ballistic Impact Performance and Shear Effect on Elastomeric and Thermoset Composites	45
A Micromechanics Analysis for Creep of Powder Metallurgy Aluminum Alloys with Continuous Precipitation	41
Random micro-vibration response analysis of a Stewart platform in satellites	37
Haskell Matrix Method for the Propagation of Love Waves in Multilayers of Magneto-Thermoelastic Materials	36
Detection and Characterization of Hidden Crack Inside a Stainless Steel Material Using Shear Vertical Waves and PLSR Technique	34
Mechanical Analysis and Experimental Research on Ultrasonic Levitated Conical Rotor Piezoelectric Actuator	30
Adhesive Contact between a Rigid Sphere and a Plastically Deformed Half-Space during Unloading	29
Semi-Analytical Results for the Linear Nonaging Viscoelastic Contact Behaviors	26
Acoustic Waves in Axial Crystals and Quasicrystals with Preliminary Finite Strains	24
Optimization of Free Vibration and Flutter Analysis of Composite Plates Using a Coupled Method of Genetic Algorithm and Generalized Differential Quadrature	21
Application of Convolutional Networks for Localization and Prediction of Scalar Parameters of Fractured Geological Inclusion	21
Material Damping Estimation within Low-, Medium- and High-Frequency Ranges	20
Optimal Response Prediction of Composite Honeycomb Sandwich Plate: Theoretical and Experimental Verification	20
Numerical Prediction and Experimental Verification of Inherent Defect Influences on Frequencies of Adhesively Bonded Joint	20
Probabilistic Progressive Failure of Multiwall Carbon Nanotube-Reinforced Composite Plate Under Transverse Patch Loading	20
Mechanical Response of New Configurations Formed After Rotation of Triple Intermittent Nested Ring	19
Three-Dimensional Transient Analysis of FGM Rectangular Sandwich Plate Subjected to Thermal Loading Using State Space Differential Quadrature Method	19
3D Printing Holey-Column Metamaterial Structure Undergoing Tailorable Buckling Deformation of Local Instability	18
Vibration Investigation of Circular Graphene Sheet with Geometrical Defect Considering Two-Phase Local/Nonlocal Theory Exposed to the Magnetic Field	18
Nonlinear Solution of a Piezoelectric PN Junction Under Temperature Gradient	17
A New Analytical Approach for Nonlinear Global Buckling of Axially Compressed and Tensiled Sandwich Toroidal Shell Segments with CNTRC Coatings and Corrugated Core in Thermal Environment	17
Thermomechanical Waves in an Axisymmetric Rotating Disk Using Refined Green–Naghdi Models	16
Static and Dynamic Deflection Characteristics of Cracked Porous FG Panels	16
On the Design of Cylindrical Magnetorheological Clutches	16
Numerical and Experimental Study of Elastohydrodynamic Grease Lubrication of Surfaces with Longitudinal and Transverse Pattern	16

Fractal Circuit Architectures for Spatially Controlled Heating and Multi-Modal Shape Programming of Electro-Active Shape Memory Polymers	15
Optimization-Oriented EPC Approach for Analyzing the Stochastic Nonlinear Oscillators with Displacement-Multiplicative and Additive Excitations	15
Elastic Bottom Effects on Ocean Water Wave Scattering by a Composite Caisson-Type Breakwater Placed Upon a Rock Foundation in a Two-Layer Fluid	15
Mechanical Properties and Material Characterization of Magneto-Thermal Sensitive Hydrogels	14
Research on Superelasticity of Shape Memory Alloys Based on Reproducing Kernel Particle Method	14
The Mechanism of Flow Patterns and Rivulet Instability in Gravity-Driven Film Flow on a Porous Wall with Uniform Heating	14
A Thermodynamic Strength Theoretical Model to Explain and Predict Pseudo-Ductility Behavior of SiCf/SiC Composite Material	14
A Poroviscoelastic Model at Finite Strains for a Viscous Compressible Solid Skeleton	14
Seismogram Synthesis of Multi-Scale Layered Transversely Isotropic Saturated Half-Space Using a Revised Stiffness Matrix Method	14
Stimuli-Induced Instabilities and Bifurcations of Responsive Polymeric Materials: A Review on Analytical and Numerical Studies	13
Robust Topology Optimization of Coated Structures with Surface Layer Thickness Uncertainty Considered	13
A Fast Time-Discontinuous Peridynamic Method for Stress Wave Propagation Problems in Saturated Porous Media	13
Transient Structural Thermo-Mechanical Response of Multi-Layered Viscoelastic Composite Laminates with Non-Idealized Interfacial Conditions Based on New Fractional Derivatives	13
An Incremental Contact Model for Rough Surfaces of Strain-Hardening Solids	13
A Novel Tri-Magnet Levitating Bistable Electromagnetic Energy Harvester with Variable Potential Wells to Promote Snap-Through Behavior	13
Free Vibration of Prestressed Plates and Shallow Shells with Piezoelectric Elements	13
A Frictionless Normal Contact Model for Flattening Elastoplastic Single Asperity Considering Yield Plateau and Strain Hardening	12
Analytic Study on the Force Transfer of Full Encapsulating Rock Bolts Subjected to Tensile Force	12
Numerical Investigation of Pipe Deformation Under Pressure With Branch	12
Modeling and Methods for Improving Anti-Rolling Abilities of Autonomous Surface Manipulator Systems	12
Dissipation of Incident Wave Energy by Two Submerged Horizontal Porous Plates Over a Pair of Trenches	12
Viscoelastic Solution for Axial Forces of Point-Anchored Rock Bolts in a Circular Tunnel	11
Modeling the Stimulus-Responsive Behaviors of Fiber-Reinforced Soft Materials	11
Padé-Based Strain Gradient Modeling of Bandgaps in Two-Dimensional Acoustic Lattice Metamaterials	11
Properties Analysis of Disk Spring with Effects of Asymmetric Variable Friction	11
Analytical and Numerical Investigation on Dynamic Behavior of Rectangular FML Sandwich Tubes with Metal Foam Core Under Low-Velocity Impact	11
A Nonlinear Triaxial Damage Creep Model for Granite Based on Atangana–Baleanu Fractional Derivative	11
A Generalized Ductile Phase Field Model for Fracture Behavior of Three-Dimensional Metal Structures	10
Nonlinear Damping and Forced Response of Laminated Composite Cylindrical Shells with Inherent Material Damping	10
Vulnerability of Pointed Masonry Barrel Vaults Subjected to Differential Settlement Simulated with a GPGPU-Parallelized FDEM	10
Reverse Analysis of Surface Strain in Elasto-Plastic Materials by Nanoindentation	10
Three-Dimensional Semiperiodic Line-Contact Mixed Lubrication Analysis of Functionally Graded Coated Gear Pairs	9
Experimental Study on the Nonlinear Shear-Flow Behavior of Granite With a Single Fracture	9
A unified modeling and analysis strategy for space membrane structures based on IGA: Form finding, vibration analysis with pretension and air effects	9
Numerical Analysis of the Effect of Work Roll Bending on Strip Crown During Tandem Hot Rolling	9
Design of Mechanical Auxetic Metamaterial for Heterogeneous Assembly, Programmable Periodic Porous Elastomer Structures	9
Thermodynamic Constitutive Model of the Gas Hydrate-Bearing Sediments Considering Anisotropy	9
The Efficient Element-Free Galerkin Method for 3D Schrödinger Equations	9
Hybrid Chemomechanical Yielding of Covalent Adaptable Networks for Toughening Ionic Semi-Crystalline Epoxy	9
Slow Growth Damage Assessment of Bonded Metal-Composite Joint Using a Numerical Approach	9
A coupled thermo-hygro-mechanical-electro formulations for static and dynamic characteristic of piezoelectric structures	9
An Investigation on an SMA Valve in Micro-Channel Through FSI Approach	8
Couple Stress-Based Flexoelectric Theory in Orthogonal Curvilinear Coordinates and its Application to an Infinitely Long Dielectric Cylinder	8
Nonlinear Stability Characteristics of Porous Graded Composite Microplates Including Various Microstructural-Dependent Strain Gradient Tensors	8
An Axial Magnetic Field Effect on Frequency Analysis of Rotating Sandwich Cylindrical Shells with FG Graphene/AL Face Sheets and Honeycomb Core	8
Novel Isotropic Anti-Tri-Missing Rib Auxetics with Prescribed In-Plane Mechanical Properties Over Large Deformations	8
Modeling and Analysis of a Thermo-Electro-Magneto-Viscoelastic Actuator	8
On Generalized Three-Phase-Lag Models in Photo-Thermoelasticity	8
The Supersonic Flutter Behavior of Sandwich Plates with an Magnetorheological Elastomer Core and Gnp-Reinforced Face Sheets	8
A Three-Dimensional Fractional Calculus-Based Creep Model for Granite Considering Thermal Effects	8

A Variational Formulation of Physics-Informed Neural Network for the Applications of Homogeneous and Heterogeneous Material Properties Identification	8
Crashworthiness Prediction and Optimization of Rib-Reinforcement Multi-Cell Tubes Based on Machine Learning Under Axial and Lateral Loadings	8
Nonlinear Primary Resonant Characteristics of Higher-Order Shear Deformable FG-CNTRC Circular Cylindrical Panels	8
Study on the Dynamic Response of Slender Sandwich Beams Loaded by Rectangular Pressure Pulse Considering Saturation Analysis	8
The Optimum Inertial Amplifier Tuned Mass Dampers for Nonlinear Dynamic Systems	7
Characterization of Tensile and Fatigue Damages in Composite Structures Using Lamb Wave for Improved Structural Health Monitoring	7
Influence of Equi-Biaxial Residual Stress on Spherical Indentation of Strain Hardening Materials	7
Numerical and Experimental Investigations on Nonlinear Buckling Response of a Laminated Composite Shell	7
Rigid-Flexible Coupled Dynamics and PD-Robust Control Design for the Spacecraft with Rotating Solar Panels	7
Quality Factor Enhancement of Piezoelectric MEMS Resonators Based on Cross-Hole Fractal Phononic Crystals	7
A New Method to Study Contributions of Polymer Fibers and Water Respectively to the Hydrogel Stress under Tension and Compression Using 3D Micro-Fiber Network Model	7
Bending and Buckling Analysis of Functionally Graded Euler–Bernoulli Beam Using Stress-Driven Nonlocal Integral Model with Bi-Helmholtz Kernel	7
Laboratory for Validation of Rolling-Resistance Models	7
Thermal Energy Harvesting in a Composite Beam Using Piezoelectric, One-Way and Two-Way Shape Memory Alloys	7
A New Theoretical Framework for Couple Stress Analysis of Reddy–Levinson Micro-Beams	7
Shale Crack Identification Based on Acoustic Emission Experiment and Wavenet Data Recovery	7
Semi-Analytical Large Deformation and Three-Dimensional Stress Analyses of Pressurized Finite-Length Thick-Walled Incompressible Hyperelastic Cylinders and Pipes	7
A Self-Optimized Machine Learning Approach for Constitutive Parameters Identification of Aortic Walls	7
Author Index Volume 13	7
Moving Load Analysis of Laminated Porous Micro Beams Resting on Elastic Foundation	7
An Explicit Modeling for the Pseudoelastic Response of Porous SMA Thick-Walled Cylinders under Internal and External Pressure	7
Dual Bubble-Enriched SFEM Approaches for Locking-Free Analysis of Structures Under Cyclic Loads	7
Impact of Two Vertical Porous Barriers in Reflection of Water Waves and Mitigation of Wave Forces on a Rigid Floating Structure with Consideration of Uniform Current Over a Porous Sea-Bed	6
Functionally Graded Soft Dielectric Elastomer Phononic Crystals: Finite Deformation, Electro-Elastic Longitudinal Waves, and Band Gaps Tunability via Electro-Mechanical Loading	6
Generalized Theory for DISes in a Large Deformed Solid	6
Author Index Volume 15	6
Probability-Based Approach for Inverse Stochastic Structural Problems	6
Buckling of Stiffened Cone–Cylinder Structures Under Axial Compression	6
Generalized multi-parameter Tikhonov regularization for time-domain identification of various types of forces	6
Study of Equivalent Mechanical Properties and Energy Absorption of Composite Honeycomb Structures	6
Cohesive Zone Model to Investigate Complex Soft Adhesive Failure: State-of-the-Art Review	6
Wave Propagation in Smart Sandwich Plates with Functionally Graded Nanocomposite Porous Core and Piezoelectric Layers in Multi-Physics Environment	6
The Effect of Intrafibrillar Post-Yield Behavior on Fracture of Mineralized Collagen Fibril Arrays	6
General Analytical Solutions for Dynamic Load-Carrying Capacity of Brittle Materials Under an Arbitrary Incident Stress Wave	6
Dynamic Parameter Optimization of High-Speed Pantograph Based on Swarm Intelligence and Machine Learning	6
Design and Optimization of a Multimode Low-Frequency Piezoelectric Energy Harvester	6
A Constitutive Framework for Modeling of the Visco-Hyperelastic Materials: Application to the Mechanical Behavior of Cylinders Made of the Rate-Dependent Elastomers	6
Thermo-Mechanical Transient Flexure of Glass-Carbon-Kevlar-Reinforced Hybrid Curved Composite Shell Panels: An Experimental Verification	6
Effects of Cover Depth and Rock Type on Dynamic Response of Road Tunnels Against Internal Explosions	6
Study on the Differences of Transition and Separation Characteristics Between Water and Air	6
Evolutionary Probabilistic Analysis of Non-Smoothly Damped Stochastic Oscillator Under Modulated Random and Harmonic Excitations	6
A Multi-Time-Step Parallel Computing Method based on Overlapping Particles for DEM	5
An Improved Nonlinear Creep Model for Rock Applied to Tunnel Displacement Prediction	5
Mechanical Behavior of a Double-Layer Supported Large-Span Tunnel Excavated in Squeezing Rocks Employing Stress Release Technology	5
Elastodynamic Analysis of Functionally Graded Beams and Plates Based on Meshless RKPM	5
Analytical and Numerical Study on Anti-Perforation Performance of Steel-Liner-Concrete Composite Targets Subjected to Projectile Impact	5
Wide Bandwidth Wind-Induced Vibration Energy Harvester with an Angle Section Head	5
Multiple Steady and Oscillatory Solutions in a Collapsible Channel Flow	5
Study on Friction Behaviors of Soft Materials Considering Sliding-Caused Deformation	5
An Indentation Method for Determining the Elastic Modulus, Hardness and Film Thickness of a Tri-Layer Materials	5
Wrinkle-Free Membrane Design Based on Physics-Informed Neural Network	5
Scale Effects on Thermoelastic Coupling Wave Propagation of Micro-Beam Resonator Using Nonlocal Stain Gradient and Generalized Thermoelasticity	5
Application of the Unscented Kalman Filter to Estimate the Material Properties of a Layered Half-Space	5
Energy Absorption of Thin-Walled Circular Tubes with a Sinusoidal Spiral Structure	5
Effects of Speed and Posture on Aerodynamic Characteristics of Running and Required Power	5
Modeling Long-Term Creep and Physical Aging Behavior of Carbon/Epoxy Composites Based on Coupling Model	5
An Investigation of Free Vibration Characteristics of a DFG-CNTRC Thin Laminated Shell in Thermal Environment	5
Fatigue Life Prediction and Verification of Railway Fastener Clip Based on Critical Plane Method	5
Toward Optimized Nonlocal Active Sound Control with Preservation of Desired Sound	5
Effects of Temperature and Layer Thickness on the Static and Dynamic Behaviors of Biocomposite Materials with Interleaved Viscoelastic Layers	5
A Generic Pre-Processing Technique of IHB Method for Continuum System to Improve Calculation Efficiency	5
Coarse-Grained Modeling and Mechanical Behaviors of Actin–Spectrin–Microtubule Complex in Axonal Cytoskeleton	5
Vibration Characteristics of Force–Electric–Thermal Coupling for Three-Dimensional Braided Piezoelectric Composite Energy Harvester	5
Thermal Entrainment in the Core Regions of Transitional Plane Fountains in Linearly Stratified Ambient Fluids	5
Comprehensive Transverse Shear Stress Analysis for FG-GRC Sandwich Plates Based on a Refined Higher-Order Zigzag Theory	5
Nonlinear Meshfree Collocation Method for Solving Double-Diffusive Natural Convection in a Porous Enclosure	4
Power-Law Modeling for Swift Viscoelastic Assessment in Biological Soft Tissues	4
Compressive Mechanical Properties and Energy Absorption of Cubic Spherical Hollow Cellular Material Based on the Rod and Curved Surface Structure	4
On Enhanced Second-Order Explicit Integration Methods with Controllable Algorithmic Dissipation and Adjustable Sub-Step Size for Hyperbolic Problems	4
A Fast Calculation Method for Sensitivity Analysis Based on Multibody System Transfer Matrix Method	4
Dynamic Strain Aging in AA5182 Alloys at a Wide Range of Temperatures	4
A New Expression of Internal Stiffness for Load Path Analysis in Structures	4
An Enhanced Circumferential Winkler Contact Force Model for Cylindrical Clearance Joints	4
Nonlinear Thermo-Mechanical Response of Bi-Directional Functionally Graded Porous Beams with Initial Geometrical Imperfection	4
Characterizing Influence of Salt and Freeze–Thaw Cycle on Strength Properties of Clay	4
Performance Improvement of Three-Spring Quasi-Zero-Stiffness Isolator by Shape Memory Alloy Damper	4
Determination of Assumed Strain Hardening Relationship from Shear–Compression Model and Data Analysis	4
Unveiling the Effects of Viscous Friction on the Full Annular Rubs in a Piecewise Smooth Rotor/Stator Rubbing System	4
The Improved Irwin’s Model for Crack Problems in Power-Law Hardening Materials	4
A Simplified GPU Implementation of the Hybrid Lattice Boltzmann Model for Three-Dimensional High Rayleigh Number Flows	4

Buckling Pattern Transition Of Periodic Porous Elastomers Induced By Proportional Loading Conditions	4
Merging Acoustic Black Holes and Local Resonators to Enhance Vibration Attenuation in Periodic Metamaterial Beams	4
Free Vibration Analysis and Numerical Simulation of Slightly Curved Pipe Conveying Fluid Based on Timoshenko Beam Theory	4
Scattering of SH Waves by a Semi-cylindrical Bump in an Inhomogeneous Half-space	4
Theoretical Analysis of Stress Intensity Factor for Two Asymmetric Cracks Emanating from Water Conveyance Tunnel	4
Dynamic Response and Damage Assessment of Partially Confined Metallic Cylinders Under Transverse Blast Loading	4
Analysis of Nonlinear Heat Conduction Problems with Temperature-Dependent Conductivity Using Peridynamic Differential Operator	4
Axially Non-Uniform Properties Effected Electro-Elastic Fields in Bended Piezoelectric Semiconductor Beams	4
Fractional-Order Rate-Dependent Piezoelectric Thermoelasticity Theory Based on New Fractional Derivatives and its Application in Structural Transient Response Analysis of Smart Piezoelectric Composite	4
A Hybrid Method for Modeling Broadband Seismic Wave Propagation in 3D Localized Regions to Incident P, SV, and SH Waves	4
Interfacial Confinement in Semi-Crystalline Shape Memory Polymer Towards Sequentially Dynamic Relaxations	4
Development of a Stable Implicit Method Without Numerical Dissipation for Nonlinear Structural Dynamic Analysis	4
Improved Maxwell Model Describing the Whole Creep Process of Salt Rock and its Programming	4
Analytical Approach to the Coupled Effects of Slope Angle and Seepage on Shallow Lined Tunnel Response	3
Developing Multi-Scale Model for Graphene Cement Nanocomposite: Study of Damage Initiation	3
A New Rectangular Finite Element for Static and Dynamic Analysis of Arbitrarily Tapered Plates	3
Nonlinear Analysis of Electric Potential in a Piezoelectric Thin Plate as Pressure Sensor	3
Scattering of Oblique Water Waves by Two Vertical Barriers Over Trench-Type Bottom	3
Research on Phase Diagram of an Improved Dual-Lane Heterogeneous Lattice Hydrodynamic Model Considering Curved Road	3
Failure Analysis of a Polygonal Void with an Oxide Layer in a Cracked Matrix	3
On the Appropriate Rotary Inertia in Timoshenko Beam Theory	3
Numerical Simulations of Lightning Strikes to Carbon Fiber Reinforced Polymers Using a Multi-Variable Approach	3
Thermoelastic Theories on the Refracted Waves in Microstretch Thermoelastic Diffusion Media	3
A Study on Effective Compressive and Shear Properties of Tetrahedral Lattice Materials	3
A Hybrid Method for Predicting Fatigue Life of Lead-Free Solder Joints Under Coupled Electrical–Thermal–Mechanical Fields	3
Response Statistics of Single-Degree-of-Freedom Systems with Lévy Noise by Improved Path Integral Method	3
Photothermoelastic Interactions in Silicon Microbeams Resting on Linear Pasternak Foundation Based on DPL Model	3
A Triaxial Viscoplastic Model with Temperature Dependence for Asphalt Concrete Permanent Deformation	3
Dynamic Response of Inflated Dielectric Elastomer Actuators Considering Material Viscoelasticity	3
Experimental Analysis of the Static and Dynamic Behavior of 3D Printed Bio-Based Conventional and Auxetic Architectural Materials	3
Application of a New Hybrid Immersed Boundary Method for the Simulation of Viscous Compressible Flows	3
Impact Response Analysis on Orthogrid Stiffened Composite Sandwich Plates Embedded with Viscoelastic Material Considering Temperature and Moisture Effects	3
Compression Experiment and Failure Analysis of Additive Manufactured Multi-Layer Lattice Sandwich Structure	3
Analysis of Thin-Walled Beams via a One-Dimensional Unified Formulation Through a Navier-Type Solution	3
An Integral-Generalized Finite Difference Method for Interface Problems in Solid Mechanics	3
Effect of Periodic Oscillation on the Interfacial Instability of Two Superposed Fluid Layers in a Fully Saturated Porous Media	3
A Dimension Coupling Method for Three-Dimensional Helmholtz and Poisson’s Equations	3
On the Stability of Hyperelastic Spherical and Cylindrical Shells Subjected to External Pressure Using a Numerical Approach	3
Investigation of the Bending Behavior in Silicon Nanowires: A Nanomechanical Modeling Perspective	3
Optimized Quadrature Rules for Isogeometric Frequency Analysis of Wave Equations Using Cubic Splines	3
Dynamic Modeling and Analysis of Soft Dielectric Elastomer Balloon Actuator with Polymer Chains Crosslinks, Entanglements and Finite Extensibility	3
3D Printed Nonuniform Auxetic Structure: Programmable Local Stiffness to Improve Mechanical Property by Avoiding Buckling	3
Vibration Instability of a Rotor in Axial-Field Permanent Magnet Motors with a Foundation Movement	3
Development and Implementation of a New Computational Strategy for the Prediction of Elastoplastic Buckling	3
Dynamic Response of Rectangular Sandwich Tubes with Metal Foam Core Under Blast Loading	3
Numerical Study of Thermal Diffusion and Diffusion Thermo Effects in a Differentially Heated and Salted Driven Cavity Using MRT-Lattice Boltzmann Finite Difference Model	3
Numerical Prediction of Failure in Unidirectional Fiber Reinforced Composite	3
Comparison of Machine Learning-Based Breakdown Pressure Prediction and Initiation Criteria in Hydraulic Fracturing Testing	3
Compact Grid-Characteristic Scheme for the Acoustic System with the Piece-Wise Constant Coefficients	3
Application of Surface-Based Smoothing Methods for Topology Optimization Results	3
The Effectiveness of Standard Friction Models in Predicting the Behavior of Micropatterned Surfaces	3
A Novel Weak-Form Space Quadrature Element Method and Application in Analysis of Non-Homogeneous Truss Structure	3
A Microscopical Model for Incubation Time and Its Associated Dynamic Load-Carrying Capacity	3
Dynamic Analysis of a Novel Mass Nanosensor Made From Piezo-Electro-Magnetic Sandwich Nanoplate	3
A Hybrid Reproducing Kernel Particle Method for Three-Dimensional Elasticity Problems	3
Vibration Control of a Time-Delayed Rotor-Active Magnetic Bearing System by Time-Varying Stiffness	3
Simplified Method for Predicting Time-Dependent Behavior of Deep-Buried Tunnel Considering Tunnel Excavation Rate and Stress Release Effects	3
Numerical Prediction and Experimental Verification of Dynamic Deflection Responses of Damaged Hybrid (Luffa- and Carbon-Nanotube-Reinforced) Polymeric Composite Panel Structure	3
Piezoelectric Response Analysis of Ferroelectret with Annular Configuration	3
Author Index Volume 16	3
Modeling of the Lateral-Torsional Buckling of the Functionally Graded Material Open Section Thin-Walled Columns	2
Impact Performance Analysis of Encapsulated Structures Considering Nonlinearity of Material and Adhesive Interfaces	2
A Review: Elastic Metamaterials and Inverse Design Methods for Shock and Vibration Mitigation	2
Tailoring of Effective Moduli in Planar Lattices Composed of Rhombic Pneumatic Components	2
Analysis of Axially Loaded Piezoelectric Semiconductor Rods with Geometric Nonlinearity	2
On the Stress Transfer and Mode Mixity for a Film of Finite Length Bonded to an Elastic Substrate	2
Elastic-Plastic Simulation Study on 6005A Aluminum Alloy Crack Propagation Based on XFEM	2
Effect of Wing Flexibility on the Lift Force Generated by a 2D Model Insect Wing Flapping in Hover Mode	2
Research on Dynamic Characteristics of Composite Towering Structure	2
Buckling of a Stiff Thin Film Embedded Between Two Compliant Substrates	2
Molecular Dynamics Simulations of Nanoindentation of CuNi Alloy	2
Acoustic Emission-Based Structural Health Prediction and Monitoring: A Comprehensive Review	2
Analysis of Thick-Walled Spherical Shells Subjected to Various Temperature Gradients: Thermo-Elasto-Plastic and Residual Stress Studies	2
Contact Damping and Stiffness Calculation Model for Rough Surface Considering Lubrication in Involute Spur Gear	2
Nonlinear Forced Vibration of Curved Beam with Nonlinear Viscoelastic Ends	2
Three-Dimensional Vibrational Characteristics of Functionally Graded Rotating Microbeams Based on the Higher-Order Refined Shear Deformation Theory	2
Modeling of Thin Plate Flexural Vibrations by Partition of Unity Finite Element Method	2
Light-Propelled Self-Swing of a Liquid Crystal Elastomer Balloon Swing	2
A Novel Unit Cell for Low-Frequency Vibration Suppression Through Meta-Plates: Modeling, Optimization and Testing	2
Surface Effects on the Frequency Dispersion of Flexural Waves in Timoshenko Nanobeams	2
Time-Dependent Response of Incompressible Membranes Based on Quasi-Linear Viscoelasticity Theory	2
Mathematical model of capsule crack propagation trajectory during continuous curvilinear capsulorhexis	2
Bending, Buckling and Vibration Analysis of Complete Microstructure-Dependent Functionally Graded Material Microbeams	2
Development of an Electrostatically Actuated Flow Rate Controller: Modeling and Characterization	2
Comparison of Continuum Stresses in Granular Material Computed by Volume Average Approach and Boundary Average Approach Under Static and Quasi-Static Conditions	2
Nonlinear Static and Dynamic Buckling Analysis of Imperfect Stiffened Double-Layer FGP Shallow Spherical Shells Embedded Within Elastic Foundations	2
Nonlinear Dynamic Analysis for a Jeffcott Rotor Considering Varying Connection Stiffness of Bolted Joint	2
A Semi-Analytical Finite Element Framework for Lamb Waves in Soft Compressible Plates Considering Strain Stiffening Effect	2
New Mechanical Models to Study the Impact of Contact, Wear, and Adhesion of Lunar Dust on Space Materials	2
A Pseudo-Lower Bound Solution of Structural Bearing Capacity by Bézier Extraction-Based Isogeometric Analysis	2
A New Equivalent Thickness Model for Fracture Prediction on Round Rods with Elliptic Surface Cracks	2
Rayleigh Wave Attenuation by a Nonlinear Metasurface with Both Vertical and Horizontal Resonators	2
A Novel Inverse Procedure Via Creating TubeNet with Constraint Autoencoder for Feature-Space Dimension-Reduction	2
Solid–Fluid Synergistic Mechanism Energy Absorption of Bioinspired Multiscale Cellular Composites	2
A Simplified Computational Workflow for Evaluation of Aortic Hemodynamics After Frozen Elephant Trunk Intervention in Type A Aortic Dissection	2